Embed Size (px)
Citation preview
MaxigraphEfficient and Modular
Efficient and Modular
The body has a gantry structure and dual side drivesystems. Work proceeds smoothly at all times since thebody is well balanced and very responsive. A rack andpinion backlash free drive is used for both the cross (X-axis) and longitudinal (Y-axis) directions, which achievesaccurate and repeatable motion. Highly accurate,smooth operation is assured thanks to precisionmachined steel rails and a stable longitudinal drivemechanism. Up to five additional carriages can beattached to a steel band which is not susceptible to slagdeposits. The specialized rapid-action coupling allowsfor efficient manual positioning of the tool carriages andmulti-torch cutting.
n Proven in high demanding production environmentsn Easy to use, very low maintenance and long lifetime of
the solid and rugged machine n Wide range of cutting thicknesses performed with oxy-
fuel and plasma cutting toolsn High speed and high precision plasma up to 400 amps
available for nearly all cutting requirements n Simplified operation via touchpanel control with proven
Burny Phantom CNC n Various marking devices for almost any marking
requirement available
n Proven in high demanding production environmentsn Easy to use, very low maintenance and long lifetime of
the solid and rugged machine n Wide range of cutting thicknesses performed with oxy-
fuel and plasma cutting toolsn High speed and high precision plasma up to 400 amps
available for nearly all cutting requirements n Simplified operation via touchpanel control with proven
Burny Phantom CNC n Various marking devices for almost any marking
requirement available
Smart and Reliable
The rugged and solid portal machine is available invarious sizes from 3.500 to 5.000mm. The base raillength can be extended by 3.000 mm increments so themachine can be customized for standard and oversizedplate dimensions. The machine consists of a solid gantryportal construction which ensures perfect stiffness overthe entire machine width. The precision machined railsare installed below the cutting table height. This allowseasy loading and unloading of the table with forklifttrucks and cranes by minimizing the risk of collisions.The Maxigraph can be equipped with up to six oxy-fuelcutting torches for processing mild steel withthicknesses of up to 200 mm. Each oxy-fuel torch can beequipped with a re-liable, automatic ignition device andan automatic capacitive height control for precisecutting. For oxy-fuel cutting processes without automaticheight control KOIKE's special designed oxy-fuel nozzle(D7) achieves perfect results. Various plasma cuttingsystems for material thicknesses of up to 40mm areavailable for cutting mild steel, stainless steel oraluminum. Numerous options, like arc marking or drillingare also available on the Maxigraph.
Maxigraph
Efficient and Modular
The body has a gantry structure and dual side drivesystems. Work proceeds smoothly at all times since thebody is well balanced and very responsive. A rack andpinion backlash free drive is used for both the cross (X-axis) and longitudinal (Y-axis) directions, which achievesaccurate and repeatable motion. Highly accurate,smooth operation is assured thanks to precisionmachined steel rails and a stable longitudinal drivemechanism. Up to five additional carriages can beattached to a steel band which is not susceptible to slagdeposits. The specialized rapid-action coupling allowsfor efficient manual positioning of the tool carriages andmulti-torch cutting.
n Proven in high demanding production environmentsn Easy to use, very low maintenance and long lifetime of
the solid and rugged machine n Wide range of cutting thicknesses performed with oxy-
fuel and plasma cutting toolsn High speed and high precision plasma up to 400 amps
available for nearly all cutting requirements n Simplified operation via touchpanel control with proven
Burny Phantom CNC n Various marking devices for almost any marking
requirement available
n Proven in high demanding production environmentsn Easy to use, very low maintenance and long lifetime of
the solid and rugged machine n Wide range of cutting thicknesses performed with oxy-
fuel and plasma cutting toolsn High speed and high precision plasma up to 400 amps
available for nearly all cutting requirements n Simplified operation via touchpanel control with proven
Burny Phantom CNC n Various marking devices for almost any marking
requirement available
Smart and Reliable
The rugged and solid portal machine is available invarious sizes from 3.500 to 5.000mm. The base raillength can be extended by 3.000 mm increments so themachine can be customized for standard and oversizedplate dimensions. The machine consists of a solid gantryportal construction which ensures perfect stiffness overthe entire machine width. The precision machined railsare installed below the cutting table height. This allowseasy loading and unloading of the table with forklifttrucks and cranes by minimizing the risk of collisions.The Maxigraph can be equipped with up to six oxy-fuelcutting torches for processing mild steel withthicknesses of up to 200 mm. Each oxy-fuel torch can beequipped with a re-liable, automatic ignition device andan automatic capacitive height control for precisecutting. For oxy-fuel cutting processes without automaticheight control KOIKE's special designed oxy-fuel nozzle(D7) achieves perfect results. Various plasma cuttingsystems for material thicknesses of up to 40mm areavailable for cutting mild steel, stainless steel oraluminum. Numerous options, like arc marking or drillingare also available on the Maxigraph.
Reliable and Comfortable Control
The new Burny Phantom is a completely integratesControl System featuring a PC-based numerical control,3 axis drive amplifiers and a comprehensive operatorsconsole. The Phantom provides the latest advances inCNC techology on a proven platform engineered toincrease productivity. The Burny Phantom CNC controlleris the successful combination of a broad functional rangeand facilitated operation via touchpanel. Comprehensivecontrol possibilities ensure reliable reproducible qualityeven in extremely hard industrial use. All processes aredirectly controlled by the system, additional manualsettings have been eliminated. Cutting data may becustomized. The dynamic speed regulation servesoptimum cutting results, in particular on corners andtangential transitions. This results in a constant cuttingquality, reduced setting times and high qualityproduction.
Maxigraph
Machine structure Gantry style, dual side driveControl panel Left-hand use (Right-hand optional)Drive system Backlash free AC-drivesRail span 3.500 /4.000 /4.500 /5.000 mmEffective cutting width 2.600 /3.100 /3.600 /4.100 mmEffective cutting length Rail length -1.750 mmRail Precision machined railway rails,
increments of 3.000 mmTorch support Steel band quick clamping deviceMax. cutting speed 6.000 mm/minMarking speed 9.000 mm/minRapid traverse speed 15.000 mm/minCNC unit Burny PhantomNumber of tools 6 torches (2 plasma max.)Minimum torch distance 125 mmPre-heat gas control Hi-Low pre-heat gas control systemPower supply voltage 230 V - 50 Hz /60 HzAvailable plasma powersources
KOIKE Super 400Hypertherm HSD & HPR-Series
Available options
HPR-Series
The HyPerformance Plasma HPR series is a mechanisedmetal cutting solution that delivers HyDefinition cutquality at half the operating costs. It providesHyDefinition's virtually dross-free cut quality but does itwith greater speed and up to two times longerconsumable life. Cut quality is consistent across a fullrange of plate thickness.
Conventional Plasma
KOIKE offers a broad variety of reliable low cost plasmasystems for its complete range of thermal cuttingmachines. These proven systems are available fromdifferent well-known manufacturers like Hypertherm orKjellberg. Please ask us for more details.
Auto Gas Console
The Auto Gas Console is a gas delivery system which iscompletely controlled from the CNC interface. Thesystem supports all processes and allows users to makereal time changes while cutting as well as diagnose andtroubleshoot. All plasma parameters are adjustable andare stored at the CNC.
Pneumatic Drillmarking Unit
Whenever the application demands drilling, here's theanswer. The KOIKE drill-marking unit provides the meansto accurately mark the spots where, once the cuttingprocess has been finished, holes can be drilled.Pneumatically driven, this unit can be used without theneed of any electrical wiring.
KOIKE – the spirit of cutting.
Advanced technology combined with face to face relationship and an in-depth
understanding of customers cutting needs – that’s what KOIKE as a Japanese manufacturer
of oxy-fuel, plasma and laser cutting technology stands for.
Customers are companies active in shipbuilding, steel construction, vehicle manufacturing, fabrication
and other heavy metal industries - they all trust on more than 90 years of KOIKE’s cutting expertise.
KOIKE Europe B.V.Grote Tocht 19 • 1507 CG Zaandam (NL)Phone +31 (0) 756127227Fax +31 (0) 75702271Web www.koike.nlE-Mail [email protected]
KOIKE Engineering GermanyPappelweg 8 • 61169 Friedberg (DE)Phone +49 (0) 6031 161571-00Fax +49 (0) 6031 161571-01Web www.koike-engineering.comE-Mail [email protected]
