24th September 2016 Saturday Venue: Faculty of Manufacturing Engineering & Faculty of Electrical & Electronic Engineering, UMP Pekan

08:00

09:00

09:05

09:15

09:30

09:45

10:45

11:15

12:00

14:00

15:30

17:30

Arrival of Participants & Guests Registration & Poster

Preparation

Recitation of Doa’

Speech By NCONPGR 2016 Chairman

Speech By Dean of Institute of Posgraduate Studies UMP

Welcoming Remarks by YH. Professor Dato’ Dr. Daing Nasir Ibrahim

Vice-Chancellor of UMP

Keynote Address 1

Keynote Address 2

Presentation of Souvenirs

Lunch

Parallel Session 1

Refreshment

Parallel Session 2

25th September 2016 Sunday Venue: Faculty of Electrical & Electronic Engineering, UMP Pekan

08:40

09:00

10:30

11:00

12:30

14:30

15:30

Registration

Parallel Session 3

Tea Break

Parallel Session 4

Lunch

Campus tour

Closing and Awards Ceremony

All presenters will be given 15 minutes for presentation including Q & A session

Keynote Address IThe Future Direction of Postgraduate Education

Professor Dr. Roshada Binti HashimDirector of International Relations OfficeUniversiti Sains Islam Malaysia (USIM)

Professor Roshada has been an academic for almost three decades and had dedicated herself to the sustainable development of aquaculture for small to medium scale farmers locally and in developing countries. Since 1986 she had published more than 50 papers in peer reviewed journals in the area fish nutrition and feeding management. Currently publications have a total of 1282 citations with a H-index of 20 (as at June 2016) and she had presented more than 30 papers at local and international conferences in the same field. In order to support her research activities, she had secured more than RM3.0 million since 1990 from USM, National Funding Agencies and an International Agency. She had graduated 11 PhD and 13 MSc students from 5 different countries.

The dissemination outcomes from the research carried out throughout her academic career can also be seen from the invitations to give keynote speeches at local and international conferences; the most recent was on the Sustainable Development of Aquaculture in ASEAN and consultancies.Over the years she had trained more than 700 potential fish farmers.

She is keen advocate for the sustainable development of higher education and in recent years had spearheaded the development of two 10-Year Strategic Plans for Postgraduate Education in USM (2010) and Internationalization in USIM (2013). Her involvement as the Organizing Chairman of the World Islamic Countries Universities Summit (WICULS 2015) recently, is testimony of her aspiration to afford change in the Higher Education landscape particularly in the Muslim world.

Keynote Address IIRole of Innovation InThe Economic Growth

Professor Dr. Md. Mahmud HasanVisiting Professor

Faculty of Electrical & Electronic EngineeringUniversiti Sains Islam Malaysia (USIM)

Professor Dr. Mahmud is a visiting professor in the Faculty of Electrical and Electronics

Engineering of the University Malaysia Pahang. He completed his Ph.D. from the University

Putra Malaysia in 1997 in the area of Robotics and Automation. He has 50+ research

publications, a book chapter and a product patent. Dr. Mahmud contributed towards innovative

teaching syllabuses design and “Robotronics” laboratory design in various universities.

Dr.Mahmud’s current research interest over the connected vehicle,Embedded Systems and

Internet of Things.

SATURDAY , (24th SEPTEMBER 2016) – DAY 1

Theme: Chemical and Natural Resources EngineeringRoom: BK1Chairperson:

Theme: Civil Engineering and Earth ResourcesRoom: BK2Chairperson:

Con

curr

ent

Sess

ion

ITime Presentation Title

14:00 – 14:15 A Review On The Extraction Methods Of Extracts And Phytochemicals From Eurycoma Longifolia (Tongkat Ali Jack)Husam Eldin Abugabr Elhag*, University Malaysia Pahang; Ahmad Ziad Sulaiman, University Malaysia Pahang; Azilah Ajit, University Malaysia Pahang

14:15 – 14:30 Extraction And Characterization Of Keratin From Chicken Feather Waste Biomass: A StudySwati Sharma*, University Malaysia Pahang; Arun Gupta, Universiti Malaysia Pahang; Syed Mohd Saufi Bin Tuan Chik ,Universiti Malaysia Pahang; Chua Yeo Gek Kee , Universiti Malaysia Pahang; Pradeep Kumar Podder, Universiti Malaysia Pahang; Jayshree Thraisingam, Universiti Malaysia Pahang; Malini Subramaniam, Universiti Malaysia Pahang

14:30 – 14:45 Adsorption Of Chloroform Onto Zero Valent Iron Supported On Mesoporous SilicaATYAF Al-Dahan*, University Malaysia Pahang; Mohd Hasbi Ab- Rahim , University Malaysia Pahang; Nugroho Dewayanto , ICBT-UKL; Prof.Mohd Ridzuan bin nordin, FTMT-UTM; Du Dongyun, SCUN-China

14:45 – 15:00 Optimization of Extraction of Natural Dye from TurmericTengku khamanur azma Tg. Mohd zamri*, Universiti Malaysia Pahang

15:00 – 15:15 Extraction Optimization of Natural Dye from Clitoria Ternatea Flower by OFATTengku khamanur azma Tg. Mohd zamri*, University Malaysia Pahang

15:15 – 15:30 Morphological And Thermal Study Of Wood–Plastic Composite Reinforced By NanoclaySumit Yadav*, Universiti Malaysia Pahang; Kamal bin Yusoh, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

I

Theme: Computer Systems and Software EngineeringRoom: BK3Chairs:

Time Presentation Title14:00 – 14:15 Application of Light Reflection Method to Observe DNAPL

Movement in Different Soil MediaMotasem Alazaiza*, Universiti Malaysia Pahang

14:15 – 14:30 Numerical Studies of Cantilevered RC Wall Behaviour Subjected to Blast LoadingMazlan Abu Seman*, Universiti Malaysia Pahang; Syarifah Maszura Syed Mohsin, Universiti Malaysia Pahang; Nasly Mohamed Ali, Universiti Malaysia Pahang; Zainorizuan Mohd Jaini, Universiti Tun Hussein Onn Malaysia

14:30 – 14:45 Effect of Mixing Ingredient on Compressive Strength of ISSA Concrete Containing Eggshell PowderTan Yeong Yu*, Universiti Malaysia Pahang

14:45 – 15:00 Challenges and Obstacles of Adoption BIM Technology in the Construction Industry in IraqHussein Hamada*, Universiti Malaysia Pahang

15:00 – 15:15 Effect of Palm Oil Fuel Ash as Partial Cement Replacement on Strength of Palm Oil Clinker Foamed ConcreteMuhammad Hariz Mohamed Idris*, Universiti Malaysia Pahang

15:15 – 15:30 Compressive Strength of Oil Palm Shell Lightweight Aggregate Concrete Containing Clinker as Sand ReplacementMuhammad Nazrin Akmal Ahmad Zawawi*, Universiti Malaysia Pahang g; Khairunisa Muthusamy, Universiti Malaysia Pahang; Nasly Mohd Ali, CCA Systems Sdn Bhd.

Con

curr

ent

Sess

ion

ITime Presentation Title

14:00 – 14:15 A Flower Pollination Algorithm Based T-Way Test Suite Generation StrategyAbdullah B. Nasser*, Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang

14:15 – 14:30 African buffalo optimization approach to the design of PID controller in automatic voltage regulator systemJulius Odili*, Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang; Mohd Nizam Mohmad Kahar, Universiti Malaysia Pahang

14:30 – 14:45 Speckle noise reduction method based on fuzzy approach for synthetic aperture radar (SAR) ImageArdhi Santoso*, Universiti Malaysia Pahang

14:45 – 15:00 Forest Fire Mapping Using Remote Sensing (Study Area: Jalan Kuantan – Pekan, Pahang, Malaysia)Mohamad Eliyass Jamaruppin*, Universiti Malaysia Pahang; Luhur Bayuaji, Universiti Malaysia Pahang

15:00 – 15:15 Hyperdize Jaya Algorithm for Harmony Search Algorithm’s Parameters SelectionAla'a Atallah Al-Omoush*, Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang

15:15 – 15:30 A conceptual model using the elliptic curve diffie–hellman with an artificial neural network over cloud computingAws Jaber*, Universiti Malaysia Pahang; Mohamad Fadli Bin Zolkipli, Universiti Malaysia Pahang

Time Presentation Title14:00 – 14:15 2x1 Microstrip Patch Array Antenna with Harmonic

Suppression CapabilityNur Aisyah Amir*, Universiti Tun Hussein Onn Malaysia; Shipun Anuar Hamzah, Universiti Tun Hussein Onn Malaysia; Khairun Nidzam Ramli, Universiti Tun Hussein Onn Malaysia; Mazlina Esa, Universiti Teknologi Malaysia

14:15 – 14:30 Investigation on Four-Wave Mixing Bandwidth using Fiber Optical Parametric AmplifierFatin Nabilah Mohamad Salleh*, Universiti Tun Hussein Onn Malaysia; Nurul Nadiah Shamsuddin, University Tun Hussien Onn; Siti Nurul Sharina Mat Yaacob, Universiti Tun Hussien Onn Malaysia; Nor Shahida Mohd Shah, Universiti Tun Hussein Onn Malaysia

14:30 – 14:45 High Non-Linear Fiber Length Verification in Optical Regeneration using Non-Return Zero and Return Zero SignalSiti Nurul Sharina Mat Yaacob*, Universiti Tun Hussien Onn Malaysia; Nor Shahida Mohd Shah, Universiti Tun Hussien Onn Malaysia; Nurul Nadiah Shamsuddin, University Tun Hussien Onn; Fatin Nabilah Mohamad Salleh, Universiti Tun Hussein Onn Malaysia

14:45 – 15:00 Gain Characteristics of a Phase Sensitive Amplifier Based on Cascaded Fiber Optic Parametric Amplifier (FOPA)Nurul Nadiah Shamsuddin*, University Tun Hussien Onn; Nor Shahida Mohd Shah, Universiti Tun Hussein Onn Malaysia; Noran Azizan Cholan, Universiti Tun Hussein Onn Malaysia; Fatin Nabilah Mohamad Salleh, Universiti Tun Hussein Onn Malaysia; Siti Nurul Sharina Mat Yaacob, Universiti Tun Hussien Onn Malaysia

15:00 – 15:15 Development of Variable Frequency Drive for Compact Three-Phase Induction Motor using Discrete ComponentsMadan Varmma Suparmaniam*, Universiti Malaysia Pahang; Ahmad Razlan Yusoff, UMP; Ajisman Apen, Universiti Malaysia Pahang

15:15 –15:30 Nature Inspired Computing Techniques for Optimal Reactive Power DispatchRebecca Ng Shin Mei*, Universiti Malaysia Pahang

Theme: Electrical and Electronics EngineeringRoom: BK4Chairs:

Con

curr

ent

Sess

ion

I

Theme: Engineering TechnologyRoom: BK5Chairs:

Con

curr

ent

Sess

ion

I

Time Presentation Title14:00 – 14:15 Therapeutic and anti-bacterial properties of fern Dipteris

conjugateRini Jarial*, Universiti Malaysia Pahang

14:15 – 14:30 Development of a novel cathode catalyst for air-cathode microbial fuel cellsRavinder Kumar*, Universiti Malaysia Pahang

14:30 – 14:45 An investigation of methane production from POME via anaerobic digestion using mixed cattle and swine manure as inoculumSanthana Krishnan*, Universiti Malaysia Pahang

14:45 – 15:00 Influence of CO2 Partial Pressure on Ethanol Dry Reforming Using 5%Ce-10%Co/Al2O3 Catalyst for Hydrogen ProductionFahim Fayaz*, Universiti Malaysia Pahang

15:00 – 15:15 Influence of Ni2+ oxide nano particles on hydrogen production in anaerobic digestion of palm oil mill effluentPuranjan Mishra*, Universiti Malaysia Pahang

15:15 – 15:30 Uric acid Detection using UV spectrometerNor Mazlee Bin Norazmi*, Green Scientific Enterprise; Dr. Hadi Bin Manap, Universiti Malaysia Pahang; Zul Rasyied Bin Ab. Rasat, Universiti Malaysia Pahang; Mazuina Binti Mohamad, Universiti Malaysia Pahang

Theme: Industrial ManagementRoom: BK6Chairs:

Con

curr

ent

Sess

ion

I

Time Presentation Title14:00 – 14:15 Multiple Objective Optimization of Green Logistics Using

Cuckoo Searching AlgorithmWei Wang*, Universiti Malaysia Pahang; Yao Liu, Universiti Malaysia Pahang

14:15 – 14:30 Identified Determinants of the Conceptual HRM FrameworkTarnima Andalib*, Universiti Malaysia Pahang

14:30 – 14:45 Review on Knowledge Sharing: Barriers and MotivationsOzavize Ayodele*, Universiti Malaysia Pahang; Sui Hai Juan, Universiti Malaysia Pahang; Hasnah Haron, Universiti Malaysia Pahang; Yao Liu, Universiti Malaysia Pahang

14:45 – 15:00 Review on intellectual capital and its components towards competitive advantage in universitiesAbdullah Alkhateeb*, Universiti Malaysia Pahang

15:00 – 15:15 Knowledge Management and Employee Engagement: A Conceptual ModelSui Hai Juan*, Universiti Malaysia Pahang

15:15 – 15:30 Point of Selection of Working Adult to Further Their Study in Higher Education Institutions: Evidence from Pahang State of MalaysiaNoor Elisurianie Salehudin*, Universiti Malaysia Pahang

Theme: Chemical and Natural Resources EngineeringRoom: BK1Chairs:

Con

curr

ent

Sess

ion

II

Time Presentation Title16:00 – 16:15 Syngas production from methane dry reforming over

15wt%Ni/85wt%CaFe2O4 catalystBamidele Ayodele*, Universiti Malaysia Pahang; Mohammad Anwar Hossain, Universiti Malaysia Pahang; Chin Kui Cheng, Universiti Malaysia Pahang; Maksudur Khan, Universiti Malaysia Pahang

16:15 – 16:30 Synthesis, characterization and catalytic performance of samarium sesquioxide supported cobalt catalyst for methane dry reforming to syngasBamidele Ayodele*, Universiti Malaysia Pahang; Mohammad Anwar Hossain, Universiti Malaysia Pahang; Shahirah Mohd Nasir Nor , Universiti Malaysia Pahang; Maksudur Khan, Universiti Malaysia Pahang; Chin Kui Cheng, Universiti Malaysia Pahang

16:30 – 16:45 Experimental study of the effect of pH on the adsorption capacity of H2S from waste water by using calcination of eggshell as an adsorbent.Omar Habeeb*, Universiti Malaysia Pahang; Ramesh K., Universiti Malaysia Pahang; Rusli Bin Mohd. Yunus, Universiti Malaysia Pahang

16:45 – 17:00 Effect of pH on Natural Pigment Betacyanin Extraction From Bougainvillea BractsNur Sabarudin*, Universiti Malaysia Pahang

17:00 – 17:15 Effects Of Solvents On The Amount Of AnthraquınoneNurul Jumri*, Universiti Malaysia Pahang

17:15 – 17:30 Isolation of Nanocellulose from Rubberwood fibre and Fibrillation Effects on Nanocellulose Reinforced Poly (Ethylene Oxide)Pradeep Kumar Podder*, Universiti Malaysia Pahang; Arun Gupta, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IITheme: Modern Language and Human SciencesRoom: BK2Chairs:

Time Presentation Title16:00 – 16:15 Existence Of God: Antithetical Themes In “Dr. Faustus”

And “Waiting For Godot”Iftikhar Yousaf*, Universiti Malaysia Pahang; Muhammad Nubli Bin Abdul Wahab, Universiti Malaysia Pahang; Nor Ashikin Binti Abdul Aziz, Universiti Malaysia Pahang; Muhammad Iqbal, Universiti Malaysia Pahang

16:15 – 16:30 Study of the Relationship between Communication Competence and Heart Rate Variability among Individuals from Different NationalitiesAbdul Qahar Sarwari*, University Malaysia Pahang

16:30 – 16:45 Amalan Sosiobudaya Di Dalam Novel Terjemahan Terpilih Harry Potter: Analisis Wacana KritisJamilah Bebe Binti Mohamad*, University Malaysia Pahang

16:45 – 17:00 From Cognitive to Meta -cognitive Strategies: Integration of Grammar Learning in MALL EnvironmentNadia Refat*, University Malaysia Pahang

17:00 – 17:15 Kajian Rintis: Persepsi Guru Terhadap Kreativiti Dan Penerapannya Melalui Elemen Merentas Kurikulum (EMK) Di Dalam Pengajaran Dan Pembelajaran Mata Pelajaran JawiWan Marzuki bin Wan Ismail*, University Malaysia Pahang; Hafizoah bt Kasim, Munira bt Abdul Razak, University Malaysia Pahang

Con

curr

ent

Sess

ion

IITheme: Electrical and Electronics EngineeringRoom: BK3Chairs:

Time Presentation Title16:00 – 16:15 Fault Tolerance for Complex System

Chan Shi Jing*, Universiti Malaysia Pahang; Dwi Pebrianti, Universiti Malaysia Pahang; Luhur Bayuaji, Universiti Malaysia Pahang

16:15 – 16:30 Global Optimum Distance Evaluated Particle Swarm Optimization For Combinatorial Optimization ProblemAinizar Mustapa*, Universiti Malaysia Pahang

16:30 – 16:45 Three Phase Induction Motor Torque Ripple Minimization Based On a Novel Nonlinear Dynamic Inverse ControllerSettar Keream*, Universiti Malaysia Pahang; Ahmed Abdalla , Universiti Malaysia Pahang; Hatem Frayyeh , Iraq; Mohd Razali , Universiti Malaysia Pahang

16:45 – 17:00 PID parameters Improvement for AGC in three Parallel-Connected Power SystemsMushtaq Najeeb*, Universiti Malaysia Pahang

17:00 – 17:15 Human-Robot Interaction Using ROS Framework For Indoor Mapping MissionsM.S. Hendriyawan Achmad*, University of Technology Yogyakarta

17:15 – 17:30 A New Hybrid Gravitational Search – Black Hole AlgorithmSuad Mohammed*, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IITheme: Industrial Sciences and TechnologyRoom: BK4Chairs:

Time Presentation Title16:00 – 16:15 Optimization of Laccase Enzyme Pretreatment Process

Parameters of Empty Fruit Bunches (EFB) Using One-Factor-At-a-Time (OFAT)Chinonso Ishmael Ukaegbu*, Universiti Malaysia Pahang; Shah Samiur Rashid, Universiti Malaysia Pahang

16:15 – 16:30 Hydrothermal Synthesis Of Α-Mno2 Nanorods And Its Electrochemical Characterization For Supercapacitor ApplicationsSyam Krishnan*, Universiti Malaysia Pahang

16:30 – 16:45 A Review of Process Parameters and Morphology of HTS YBCO by Electrospinning TechniqueSaleh Eesaa*, Universiti Malaysia Pahang

16:45 – 17:00 Mathematical Formulation To Study The Thermal Post Buckling Of Orthotropic Circular PlatesAnju Nair*, Universiti Malaysia Pahang

17:00 – 17:15 The Effect Of Fusel Oil-Diesel Blending Fuel On Exhaust Emissions Of Single Cylinder Compression Ignition EngineOmar Awad*, Universiti Malaysia Pahang

17:15 – 17:30 Bio-Waste Corn-cob Cellulose Supported Poly(amidoxime) Palladium Nanoparticles for Suzuki-Miyaura Cross-Coupling ReactionsTahnim Sultana*, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

II

Theme: Manufacturing EngineeringRoom: BK5Chairs:

Time Presentation Title16:00 – 16:15 Acoustic Emission and Artificial Intelligent Methods in

Condition Monitoring of Rotating Machine – A ReviewYasir Ali*, Universiti Teknologi Malaysia

16:15 – 16:30 Analysis Of Dry Turning Process Of AISI316 For Coated And Uncoated Insert Tools From Energy And Economical ConsiderationsSalem Bagaber*, Universiti Malaysia Pahang

16:30 – 16:45 Simulation on Metal Matrix Composite Brake DiscC D Marini*, Universiti Malaysia Pahang; Gan Wei Kang, Universiti Malaysia Pahang; N Fatchurrohman, Universiti Malaysia Pahang

16:45 – 17:00 An Interval Fuzzy-Valued MTOPSIS Model for Design Concept SelectionDaniel Aikhuele*, Universiti Malaysia Pahang

17:00 – 17:15 Effect of Rotational speed on mechanical properties and microstructure due to the addition of reinforcements on friction stir welded dissimilar aluminum alloysRavinder Reddy Baridula*, Universiti Malaysia Pahang

17:15 – 17:30 Assessment Influence Of Microwave Heating On A Physical Properties Of Dried Clay Bricks Compared With Conventional MethodsSalem Bagaber*, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IITheme: Electrical and Electronics EngineeringRoom: BK6Chairs:

Time Presentation Title16:00 – 16:15 Four Different Methods to Hybrid Simulated Kalman Filter

(SKF) with Particle Swarm Optimization (PSO)Badaruddin Muhammad*, Universiti Malaysia Pahang; Zuwairie Ibrahim, Universiti Malaysia Pahang

16:15 – 16:30 Swiftlet Sound Identification using Vector Quantization and Minimum Distance ClassifierSiti Nurzalikha Zaini Husni and Mohd Zamri Ibrahim, Universiti Malaysia Pahang

16:30 – 16:45 Solving Airport Gate Allocation Problem Using Angle Modulated Simulated Kalman FilterKamil Zakwan Mohd Azmi*, Universiti Malaysia Pahang

16:45 – 17:00 Three Approaches to Solve Combinatorial Optimization Problems using Simulated Kalman Filter Vector Evaluated GravitationalZulkifli Md Yusof*, Universiti Malaysia Pahang

17:00 – 17:15 Adaptive Beamforming Algorithm based on Simulated Kalman FilterKelvin Lazarus*, Universiti Malaysia Pahang; Nurul Hazlina Noordin, Universiti Malaysia Pahang; Zuwairie Ibrahim, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IIITheme: Chemical and Natural Resources EngineeringRoom: BK1Chairs:

SUNDAY , (25th SEPTEMBER 2016) – DAY 2

Time Presentation Title09:00 – 09:15 A Short review on mesoporous silica-supported catalysts

for methane dry reformingSharanjit Singh*, Universiti Malaysia Pahang; Dai-Viet N. Vo, Universiti Malaysia Pahang

09:15 – 09:30 The effect of light wavelength on water quality in photocatalytic seawater pre-treatmentWeerana Eh Kan*, Universiti Malaysia Pahang; Ruzinah Isha, Universiti Malaysia Pahang

09:30 – 09:45 Effects of Ultrasound Treatment and Impact Modifier on Oil Palm Empty Fruit Bunch Fiber Reinforced Poly (Lactic) Acid CompositesJohn Akindoyo*, Universiti Malaysia Pahang

09:45 – 10:00 Mechanism of Microwave Assisted Hydrodistillation Studied Through Heat AnalysisNitthiyah Jeyaratnam*, Universiti Malaysia Pahang

10:00 – 10:15 A New Synergistic approach to Studying Drag reduction of Rigid polymer and Microbubbles in turbulent flowEdward Akindoyo*, Universiti Malaysia Pahang

10:15 – 10:30 Evaluation of electricity generation and wastewater treatment from Palm oil mill Effluent using single and dual chamber microbial fuel cellAmirul Islam*, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IIITheme: Electrical and Electronics EngineeringRoom: BK2Chairs:

Time Presentation Title09:00 – 09:15 Local Optimum Distance Evaluated Simulated Kalman

Filter For Combinatorial Optimization ProblemsZulkifli Md Yusof*, Universiti Malaysia Pahang

09:15 – 09:30 White Hole-Black Hole AlgorithmSuad Mohammed*, Universiti Malaysia Pahang

09:30 – 09:45 How Important the Error Covariance in Simulated Kalman Filter?Nor Hidayati Abdul Aziz*, Universiti Malaysia Pahang; Zuwairie Ibrahim, Universiti Malaysia Pahang; Saifudin Razali, Universiti Malaysia Pahang; Taofiq Adeola Bakare, Multimedia University; Nor Azlina Ab. Aziz, Multimedia University

09:45 – 10:00 Estimation-based Metaheuristics: A New Branch of Computational IntelligenceNor Hidayati Abdul Aziz*, Universiti Malaysia Pahang; Zuwairie Ibrahim, Universiti Malaysia Pahang; Saifudin Razali, Universiti Malaysia Pahang; Nor Azlina Ab. Aziz, Multimedia University

10:00 – 10:15 Four Different Methods to Hybrid Simulated Kalman Filter with Gravitational Search AlgorithmBadaruddin Muhammad*, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IIITheme: Industrial Sciences and TechnologyRoom: BK3Chairs:

Time Presentation Title09:00 – 09:15 A Review : The Method Of Preparation Polyurethane

Using Glycerol Palm Oil BasedSyarifah Norsuhaila Syed Mahmud*, Universiti Malaysia Pahang

09:15 – 09:30 Compatible Pair of Nontrivial Actions for Cyclic Groups of 3-Power OrderMohammed Shahoodh*, Khalid; Mohd Sham Mohamad, Universiti Malaysia Pahang; Yuhani Yusof, Universiti Teknologi Malaysia & Universiti Malaysia Pahang; Sahimel Azwal Sulaiman, Universiti Malaysia Pahang

09:30 – 09:45 Transformation of pTrcHis and pUC8.2-14 into Escherichia coli BL21 (DE3)Wan Siti Atikah Wan Omar Wan Omar*, Universiti Malaysia Pahang

09:45 – 10:00 Synthesis of Kenaf Cellulose Supported Highly Active Poly(amidoxime) Palladium Complex and Its Application as a Reusable Catalyst for Allylic Arylation reactions.Bablu Mandal*, Universiti Malaysia Pahang; Shaheen Sarkar, Universiti Malaysia Pahang; Lutfor Rahman, Universiti Malaysia Pahang; Hasbi Rahim, Universiti Malaysia Pahang

10:00 – 10:15 Influence of Annealing Temperatures on Properties in Chelate Based CuI Thin FilmsZulkifly Aziz*, University Malaysia Pahang

10:15 – 10:30 Suction/Injection Effect on a Boundary Layer Flow past a Stretching Cylinder with Slip ConditionMuhammad Khairul Anuar Mohamed*, Universiti Malaysia Pahang; Hasmawani Hashim, University Malaysia Pahang; Nor Aida Zuraimi Noar, Universiti Malaysia Pahang; Norhafizah Mohd Sarif, Universiti Malaysia Pahang; Mohd Zuki Salleh, Universiti Malaysia Pahang; Anuar Ishak, Universiti Kebangsaan Malaysia

Con

curr

ent

Sess

ion

IIITheme: Civil Engineering and Earth ResourcesRoom: BK4Chairs:

Time Presentation Title09:00 – 09:15 Durability of OPS Lightweight Aggregate Concrete

Containing Palm Oil Fuel Ash after Long Term Exposure in Sulphate EnvironmentNur Azzimah Zamri*, Universiti Malaysia Pahang; Khairunisa Muthusamy, Universiti Malaysia Pahang; Nasly Mohd Ali, CCA Systems Sdn Bhd.

09:15 – 09:30 Flexural Performance of PVA Reinforced ECC Beams: Numerical and Parametric StudiesAbdolbaqi Khdher*, University Malaysia Pahang

09:30 – 09:45 Compressive Strength of Brick Containing Crushed Cockle Shell as Partial Sand ReplacementMuhammad Nazrin Akmal Ahmad Zawawi*, Universiti Malaysia Pahang; Khairunisa Muthusamy, Universiti Malaysia Pahang; Shahrul Munir Abdul Nasir, Universiti Malaysia Pahang; Mohamad Firdaus Mohamad Azhar, Universiti Malaysia Pahang; ‘Aizam ‘Uzer, Universiti Malaysia Pahang

09:45 – 10:00 Mix Design: Effect of Mixing Constituents towards Palm Oil Clinker Lightweight Aggregate ConcreteNur Azzimah Zamri*, Universiti Malaysia Pahang; Khairunisa Muthusamy, Universiti Malaysia Pahang; Kusbiantoro Andri, Universiti Malaysia Pahang; Nasly Mohd Ali, CCA Systems Sdn Bhd.

10:00 – 10:15 An Overview of Using Steel Fibers in Reinforced Concrete structural elements to improve Shear ReinforcementAbdullah O. Baarimah*, Universiti Malaysia Pahang; Sharifah Maszura Syed Mohsin, Universiti Malaysia Pahang

10:15 – 10:30 An Overview of Using Building Information Modelling (BIM) in Construction ManagementJa’far A. Aldiabat Albtoosh*, Universiti Malaysia Pahang; Ahmed Tarmazi Haron, Universiti Malaysia Pahang; Mohammed A. Aldiabat Albtoosh, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IIITheme: Mechanical EngineeringRoom: BK5Chairs:

Time Presentation Title09:00 – 09:15 Prevention of Springback of High Strength Steel Sheet in

L-Bending ProcessMohd Syafiq Yusoff*, Universiti Malaysia Pahang; Zamzuri Hamedon, Universiti Malaysia Pahang

09:15 – 09:30 Effect of vortex generator on the air-side thermal-hydraulic performance of flat tube heat exchangersA. Y. Adam*, Universiti Malaysia Pahang; A. N. Oumer, Universiti Malaysia Pahang; Azri Alias, Universiti Malaysia Pahang; M. Ishak, Universiti Malaysia Pahang

09:30 – 09:45 Effect of Acid Pickling on Microstructure and Surface Roughness of 316L Stainless SteelRuhil Izzati Mohd Asri*, Universiti Malaysia Pahang; Wan Sharuzi Wan Harun, Universiti Malaysia Pahang

09:45 – 10:00 Solvent Debinding of Water Soluble PEG for Water Atomised 316L Stainless Steel CompactN.S. Manam*, Universiti Malaysia Pahang; Wan Sharuzi Wan Harun, Universiti Malaysia Pahang

10:00 – 10:15 Effect of Binders on Physical and Mechanical Properties of Stainless Steel 316L Alloy Fabricated by Metal Injection Moulding ProcessMohd Faizul Farhan Ahmad Hamidi*, Universiti Malaysia Pahang; Wan Sharuzi Wan Harun, Universiti Malaysia Pahang

10:15 – 10:30 Effect of nanolubricant on Evaporator and Condenser Pressure of Automotive Air Conditioning SystemM.Z. Sharif*, Universiti Malaysia Pahang; W.H. Azmi, Universiti Malaysia Pahang; A.A.M. Redhwan, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IIITheme: Chemical and Natural Resources EngineeringRoom: BK6Chairs:

Time Presentation Title09:00 – 09:15 Optimization Of Succinic Acid From Fermentation

Process by Using Immobiized Escherichia Coli Cells Via Anaerobic FermentationA.A.Nik Nor Aziati*, Universiti Malaysia Pahang; A. M. Mimi Sakinah, Universiti Malaysia Pahang

09:15 – 09:30 Characterization of Raw Material (Glycerol Residue) and Escherichia Coli in Immobilized Cell for Succinic Acid ProductionA.A.Nik Nor Aziati*, Universiti Malaysia Pahang; A. M. Mimi Sakinah, Universiti Malaysia Pahang

09:30 – 09:45 Mixed Reverse Micellar Systems (MRMS) for Extraction of Erythromycin: Effect of Surfactant Concentration on Forward Extraction StepS. N. Mohamad-Aziz*, Universiti Malaysia Pahang; A. M. Mimi Sakinah, Universiti Malaysia Pahang

09:45 – 10:00 Intermolecular interaction of MEA, DEA, MDEA, AMP and PZ amines in absorption process to capture CO2 using molecular dynamic simulation approachE. E. Masiren*, Universiti Malaysia Pahang; N. Harun, Universiti Malaysia Pahang; W. H. W. Ibrahim, Universiti Malaysia Pahang; F. Adam, Universiti Malaysia Pahang

10:00 – 10:15 Biobutanol Production by Clostridium acetobutylicum ATCC 824 Using Oil Palm Frond (OPF) JuiceNur Syazana Muhd Nasrah*, Universiti Malaysia Pahang; Mior Ahmad Khushairi Mohd Zahari, Universiti Malaysia Pahang; Nasratun Masngut, Universiti Malaysia Pahang

10:15 – 10:30 An Analysis of Dust Explosion Incidents in Industries and Mitigation Best Practices Within MalaysiaMohd Azimie Bin Ahmad*, University Malaysia Pahang; Norazura Binti Ismail, University Malaysia Pahang; Mohamad Rizza Bin Othman, University Malaysia Pahang

Con

curr

ent

Sess

ion

IVTheme: Chemical and Natural Resources EngineeringRoom: BK1Chairs:

Time Presentation Title11:00 – 11:15 Contribution of Membrane Fouling During Ultrafiltration of

Hylocereus Polyrhizus Peel ExtractAzimah Saman, Universiti Malaysia Pahang; A.M. Mimi Sakinah*, Universiti Malaysia Pahang, A.W. Zularisam, Universiti Malaysia Pahang

11:15 – 11:30 A Review On Perovskite As A CatalystOsarieme Uyi Osazuwa, Universiti Malaysia Pahang; Chin Kui Cheng*, Universiti Malaysia Pahang

11:30 – 11:45 Production of Sorbitol from Meranti Wood Sawdust (MWS) using Immobilized Cells via Solid State Fermentation (SSF) Process: OFAT studyS.A.Zuriana*, Universiti Malaysia Pahang; A.M.Mimi sakinah, Universiti Malaysia Pahang; M.S.Farhan, Universiti Malaysia Pahang

11:45 – 12:00 Characterization of Meranti wood Sawdust as Energy Source Feedstock and Removal of Lignin Content using Pre-treatment ProcessS.A.Zuriana*, Universiti Malaysia Pahang; A.M.Mimi sakinah, Universiti Malaysia Pahang; M.S.Farhan, Universiti Malaysia Pahang

12:00 – 12:15 Optimization of Gluten Free Bread Formulation by Adding Xanthan Gum, Potato Starch and Sorbitol Using Response Surface MethodologyA.Azwin*, Politeknik Tun Syed Nasir; A.M.Mimi Sakinah, Universiti Malaysia Pahang; S. Mohd Ahmadi, Occupational Safety and Health

Con

curr

ent

Sess

ion

IVTheme: Industrial ManagementRoom: BK2Chairs:

Time Presentation Title11:00 – 11:15 Operational Performance of Courier Companies to E-

Business Firms: Literature ReviewNurul Izzah*, Universiti Malaysia Pahang; Liu Yao, Universiti Malaysia Pahang; Cheng Jack Kie, Universiti Malaysia Pahang; Damhuji Rifai, Universiti Malaysia Pahang

11:15 – 11:30 Business Process Reengineering and Changing Management: a case study of Yemen Culture Attaché in MalaysiaBasheer Alhaimi*, Universiti Malaysia Pahang; Fadhl Hujinah, Universiti Malaysia Pahang

11:30 – 11:45 Internal Audit Practice in Malaysian Public Sector OrganizationsNur Ain Zakiah binti Mohd Yusof*, Universiti Malaysia Pahang; Hasnah binti Haron, Universiti Malaysia Pahang; Ishak bin Ismail, Universiti Malaysia Pahang

11:45 – 12:00 Study on the Impact of Linkage Capabilities onTechnological Competitive Advantage and Firm Performance in the Automotive Industry in MalaysiaFaridah binti Taju Rahim*, Universiti Malaysia Pahang; Yuserrie bin Zainuddin, Universiti Malaysia Pahang

12:00 – 12:15 Role of Chief Integrity Officer in Malaysian Public SectorAsmawati Binti Sajari*, Universiti Malaysia Pahang; Hasnah Haron, Universiti Malaysia Pahang; Ishak Ismail, Universiti Malaysia Pahang

12:15 – 12:30 Halal Analysis of An Aquatic Animal (pangasius sutchii) using RT-PCR For Detection of Porcine DNATengku Nor Hidayati Tengku Zainal Abidin*, Politeknik; Hasan Ahmad, Universiti Malaysia Pahang

Theme: Electrical and Electronics EngineeringRoom: BK3Chairs:

Con

curr

ent

Sess

ion

IV

Time Presentation Title11:00 – 11:15 Sizing and Design of PV Array for a Photovoltaic Power

Plant Connected Grid’s InverterAli Q. Al-Shetwi*, Universiti Malaysia Pahang; Muhamad Zahim Sujod, Universiti Malaysia Pahang

11:15 – 11:30 Modeling and Performance Analysis Of Plug-In Split Hybrid Electric VehicleMuhammad Ikram Mohd Rashid*, Universiti Malaysia Pahang; Hamdan Daniyal, Universiti Malaysia Pahang; Aizat Abd Muttalib, Universiti Malaysia Pahang

11:30 – 11:45 Low-Power Active RFID System Using nRF24L01Ahmad Azzreen Bin Dalawi*, Universiti Malaysia Pahang

11:45 – 12:00 Hull Design for ROV with Four Thrusters (X4-ROV)Khairil Ashraff Bin Ab Rahim*, Universiti Malaysia Pahang; Zainah Md Zain, Universiti Malaysia Pahang; Nurfadzillah Harun, Universiti Malaysia Pahang; Maziyah Mat Noh, Universiti Malaysia Pahang

12:00 – 12:15 Odour-Profile Classification of Gelam, Acacia and Tualang Honey based on K-Nearest Neighbors TechniqueNurdiyana Zahed*, Universiti Malaysia Pahang; Muhammad Sharfi Najib, Universiti Malaysia Pahang; Saıful Nizam Tajuddin, Universiti Malaysia Pahang

12:15 – 12:30 The Correlation between Levels of Self-Esteem, University Commitment and Academic Performance among Undergraduate StudentsWael Sahdo kharsah*, Universiti Malaysia Pahang; Famawati latada, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IVTheme: Industrial Sciences and TechnologyRoom: BK4Chairs:

Time Presentation Title11:00 – 11:15 Compatible Pair Of Nontrivial Action For Finite Cyclic 2-

GroupsSahimel Azwal Sulaiman*, Universiti Malaysia Pahang; Mohd Sham Mohamad, Universiti Malaysia Pahang; Yuhani Yusof, Universiti Teknologi Malaysia & Universiti Malaysia Pahang; Mohammed Shahoodh, Khalid

11:15 – 11:30 Flow and Heat Transfer Analysis of Williamson Viscous Fluid on the Stagnation Point past a Stretching Surface with Viscous Dissipation and Slip ConditionsHasmawani Hashim*, University Malaysia Pahang

11:30 – 11:45 Numerical Solutions of the Aligned Magnetic Field on the Boundary Layer Flow and Heat Transfer over a Stretching Sheet by using Keller Box MethodNur Syamilah Arifin*, Universiti Malaysia Pahang; Abdul Rahman Mohd Kasim, Universiti Malaysia Pahang; Syazwani Mohd Zokri, Universiti Malaysia Pahang; Mohd Zuki Salleh, Universiti Malaysia Pahang; Laila Ameera Aziz, Ump; Nurul Farahain Mohammad, International Islamic University Malaysia

11:45 – 12:00 Numerical Solutions on Mixed Convection Boundary Layer and Heat Transfer of Jeffrey Fluid over a Horizontal Circular Cylinder by using Keller-box MethodSyazwani Mohd Zokri*, Universiti Malaysia Pahang; Mohd Zuki Salleh, Universiti Malaysia Pahang; Muhammad Khairul Anuar Mohamed, UMP; Nur Syamilah Arifin, Universiti Malaysia Pahang; Abdul Rahman Mohd Kasim, Universiti Malaysia Pahang; Nurul Farahain Mohammad, International Islamic University Malaysia

12:00 – 12:15 Influence of Slip Velocity and Aligned Magnetohydrodynamics on Convective Boundary Layer Flow of Jeffrey Fluid with Convective Boundary Condition Across Stretching SheetAbdul Rahman Mohd Kasim*, Universiti Malaysia Pahang; Hussein Ali Mohammed Al-Sharifi, Universiti Malaysia Pahang; Laila Aziz, Universiti Malaysia Pahang

12:15 – 12:30 The Impact of Pepper Production on Malaysian Economic and the Need for Nutraceutical DiversificationOlusegun Olalere, Universiti Malaysia Pahang; Hamid Nour Abdurahman*, Universiti Malaysia Pahang; Oluwaseun Ruth Alara, Universiti Malaysia Pahang

Time Presentation Title11:00 – 11:15 Impregnation Of K+ Over Deoiled Spent Bleaching Clay

(SBC) As A Catalyst In TransesterificationRehan Zainol Abidin*, Universiti Malaysia Pahang

11:15 – 11:30 Kinetic Model Of Ethanol Fermentation From Oil Palm Trunk SapSharmin Sultana*, Universiti Malaysia Pahang; Norazaliza Binti Mohd Jamil, Universiti Malaysia Pahang; Abu Yousuf, Universiti Malaysia Pahang

11:30 – 11:45 The Deficiency Of CH3NH3PbI3 Solar Cells Performance Under High Relative HumidityNurul Ain Manshor*, Universiti Malaysia Pahang ; Zinab H. Bakr, Universiti Malaysia Pahang ; Rajan Jose, Universiti Malaysia Pahang

11:45 – 12:00 Composite SnO2 /ZnO nanofiber for Dye Sensitized Solar CellZinab H. Bakr, Universiti Malaysia Pahang; Qamar Wali, Universiti Malaysia Pahang; Rajan Jose*, Universiti Malaysia Pahang

12:00 – 12:15 Experimental and Numerical investigation of Heat transfer augmentation using Al2O3-Ethylene Glycol/Water nanofluids under turbulent flows in a tubeAbdolbaqi Khdher*, University Malaysia Pahang

12:15 – 12:30 The Correlation between Levels of Self-Esteem, University Commitment and Academic Performance among Undergraduate StudentsWael Sahdo kharsah*, Universiti Malaysia Pahang; Famawati latada, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IVTheme: Industrial Sciences and TechnologyRoom: BK5Chairs:

Time Presentation Title

Theme: Computer Systems and Software EngineeringRoom: BK6Chairs:

11:00 – 11:15 Paper Heat Optimization in Internal Curing Process of Geopolymer Mortar by using Steel DustNabilah Mamat*, Universiti Malaysia Pahang

11:15 – 11:30 Performance Evaluation of Hybrid SKF Algorithms: Hybrid SKF-PSO and Hybrid SKF-GSABadaruddin Muhammad*, Universiti Malaysia Pahang; Zuwairie Ibrahim, Universiti Malaysia Pahang

11:30 – 11:45 The Impact of Customer Trust and Perception of Security and Privacy on the Acceptance of Online Banking Services: Structural Equation Modeling ApproachMohammed A. Al-Sharafi*, Universiti Malaysia Pahang; Ruzaini Abdullah Arshah, Universiti Malaysia Pahang, Fadi A. Herzallah, Universiti Kebangsaan Malaysia, Emad A. Abu- Shanab, Yarmouk University

11:45 – 12:00 Vector Evaluated Gravitational Search Algorithm Assisted by Non-dominated Solutions in Solving Multiobjective Optimization ProblemsBadaruddin Muhammad*, Universiti Malaysia Pahang; Zuwairie Ibrahim, Universiti Malaysia Pahang

Con

curr

ent

Sess

ion

IV