3
Haward Technology Middle East EE507-IH - Page 1 of 3 . EE507-IH|Rev.00|30 April 2012 COURSE OVERVIEW EE507-IH GUTOR UPS Course Title GUTOR UPS Course Date/Venue Course Reference EE507-IH Course Duration/Credits Five days/3.0 CEUs/30 PDHs Course Objectives Upon the successful completion of this course, each participant will be able to:- Apply and gain an in-depth knowledge on GUTOR UPS Discuss the use of GUTOR UPS as well as describe the technical speficfication of GUTOR UPS Determine the type and models of GUTOR UPS Design, build GUTOR UPS and identify the benefits of GUTOR UPs Recognize the UP’s phases that includes single and 3-phases Use power quality monitors/eig energy meters Analyze industrial ac and dc SMPS platform Describe the inverter, rectifier and charger in GUTOR UPS Identify the battery cabinets in GUTOR UPS Install, supervise and commission GUTOR UPS Operate and maintain GUTOR UPS as well as find full solution approach for GUTOR UPS Who Should Attend This course is intended for engineers, supervisors and technicians. Training Methodology This interactive training course includes the following training methodologies as a percentage of the total tuition hours:- 30% Lectures 30% Workshops & Work Presentations 20% Case Studies & Practical Exercises 20% Videos, Software & General Discussions The course instructor may modify the above training methodology before or during the course for technical reasons with no prior notice to participants.

EE507 IH Overview

  • Upload
    mzayan

  • View
    9

  • Download
    1

Embed Size (px)

Citation preview

Page 1: EE507 IH Overview

Haward Technology Middle East

EE507-IH - Page 1 of 3 .

EE507-IH|Rev.00|30 April 2012

COURSE OVERVIEW EE507-IH

GUTOR UPS

Course Title GUTOR UPS Course Date/Venue Course Reference EE507-IH Course Duration/Credits Five days/3.0 CEUs/30 PDHs Course Objectives Upon the successful completion of this course, each participant will be able to:-

Apply and gain an in-depth knowledge on GUTOR UPS

Discuss the use of GUTOR UPS as well as describe the technical speficfication of GUTOR UPS

Determine the type and models of GUTOR UPS

Design, build GUTOR UPS and identify the benefits of GUTOR UPs

Recognize the UP’s phases that includes single and 3-phases

Use power quality monitors/eig energy meters

Analyze industrial ac and dc SMPS platform

Describe the inverter, rectifier and charger in GUTOR UPS

Identify the battery cabinets in GUTOR UPS

Install, supervise and commission GUTOR UPS

Operate and maintain GUTOR UPS as well as find full solution approach for GUTOR UPS

Who Should Attend This course is intended for engineers, supervisors and technicians. Training Methodology This interactive training course includes the following training methodologies as a percentage of the total tuition hours:- 30% Lectures 30% Workshops & Work Presentations 20% Case Studies & Practical Exercises 20% Videos, Software & General Discussions The course instructor may modify the above training methodology before or during the course for technical reasons with no prior notice to participants.

Page 2: EE507 IH Overview

Haward Technology Middle East

EE507-IH - Page 2 of 3 .

EE507-IH|Rev.00|30 April 2012

Course Certificate(s) Internationally recognized certificates will be issued to all participants of the course.

Course Accreditation Haward Technology’s courses/workshops/seminars meet the professional certification and continuing education requirements for participants seeking Continuing Education Units (CEUs) in accordance with the rules & regulations of the International Association for Continuing Education & Training (IACET). IACET is an international authority that evaluates programs according to strict, research-based criteria and guidelines. The CEU is an internationally accepted uniform unit of measurement in qualified courses of continuing education.

Haward Technology has been approved as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1760 Old Meadow Road, Suite 500, McLean, VA 22102, USA. In obtaining this approval, Haward Technology has demonstrated that it complies with the ANSI/IACET 1-2007 Standard which is widely recognized as the standard of good practice internationally. As a result of our Authorized Provider membership status, Haward Technology is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET 1-2007 Standard.

Haward Technology Middle East will award 3.0 CEUs (Continuing Education Units) or 30 PDHs (Professional Development Hours) for participants who completed the total tuition hours of this program. One CEU is equivalent to ten Professional Development Hours (PDHs) or ten contact hours of the participation in and completion of Haward Technology programs. A permanent record of a participant’s involvement and awarding of CEU will be maintained by Haward Technology. Haward Technology will provide a copy of the participant’s CEU and PDH Transcript of Records upon request. Course Program The following program is planned for this course. However, the course instructor(s) may modify this program before or during the course for technical reasons with no prior notice to participants. Nevertheless, the course objectives will always be met:

Day 1

0730 – 0800 Registration & Coffee

0800 – 0815 Welcome & Introduction

0815 – 0830 PRE-TEST

0830 – 0930 Introduction

0930 – 0945 Break

0945 – 1100 Why we Use GUTOR UPS

1100 – 1230 Description and Technical Specifications of GUTOR UPS 1230 – 1245 Break

1245 - 1430 Type and Models of GUTOR UPS

1430 Lunch & End of Day One Day 2

0730 – 0900 Design and Build

0900 – 0915 Break

0915 – 1100 GUTOR UPS Benefits

Page 3: EE507 IH Overview

Haward Technology Middle East

EE507-IH - Page 3 of 3 .

EE507-IH|Rev.00|30 April 2012

1100 – 1230 GUTOR UPS Benefits (cont’d))

1230 – 1245 Break

1245 – 1430 GUTOR UPS Models and Phases

1430 Lunch & End of Day Two Day 3

0730 – 0930 Single Phase UPS's 0930 – 0945 Break

0945 – 1100 3-Phase UPS's

1100 – 1215 Power Quality Monitors/EIG Energy Meters 1215 – 1230 Break

1230 – 1430 Industrial AC and DC SMPS Platform

1430 Lunch & End of Day Three

Day 4

0730 – 0930 Inverter in GUTOR UPS 0930 – 0945 Break

0945 – 1100 Rectifier and Charger in GUTOR UPS

1100 – 1215 Rectifier and Charger in GUTOR UPS (cont’d)

1215 – 1230 Break

1230 – 1430 UPS Battery Cabinets in GUTOR UPS 1430 Lunch & End of Day Four

Day 5

0730 – 0930 Installation Supervision & Commissioning (Start-up) 0930 – 0945 Break

0945 – 1100 Operation and Maintenance of GUTOR UPS

1100 – 1215 Operation and Maintenance of GUTOR UPS (cont’d)

1215 – 1230 Break

1230 – 1400 GUTOR Full Solution Approach 1400 – 1415 POST-TEST

1415 – 1430 Presentation of Course Certificates

1430 Lunch & End of Course