Embed Size (px)
Citation preview
www.EmersonProcessCourseAdvisor.com
www.EmersonProcessCourseAdvisor.com
Course 7009
This 4-1/2 day course covers a complete DeltaV system implementation. Upon completion of this course the student will be able to define system capabilities, define nodes, configure continuous and sequential control strategies, operate the system and define users and security.
Prerequisites
Windows experience. It is recommended that prospective attendees new to process control systems attend Course 7101 or Course 7018.
Topics
• System Overview• Explorer• Control Modules• Control Studio• Motor Control• Regulatory Control• WorkSpace• System Operation• Alarms & Process History View• Sequential Function Charts• Phase Logic• Security• Alarm Help• Electronic Marshalling (CHARMS)
DeltaV Implementation I DeltaV Implementation II
Course 7017
This 4-1/2 day course is for process control engineers responsible for configuring the DeltaV system. Advanced topics will be covered including displays, function blocks, and configuration tips.
Prerequisites
Course 7009, DeltaV Implementation I
Topics
• Function Block Structure• HART Inputs and Outputs• Analog Control Blocks• DeltaV Tune with InSight• Device Control Options• Class Based Control Modules• Expressions• Unit Alarms• Multi-Dimensional (ArrayParameter)• Equipment Modules• Display Environment• Custom Faceplates• Custom Dynamos• HART Device Alarms
MA
NA
GE &
OP
TIM
ISE
DeltaV Systems Batch Implementation
Course 7016
This 4-1/2 day course covers the implementation of a complete batch application. A process simulator will provide a batch application. Students will use DeltaV Batch software to configure recipe entities including, Aliasing, Equipment Trains, Dynamic Unit Allocation, Phase Logic, Operations and Unit Procedures. Equipment entities will also be configured including, Units modules and Process cells.
Prerequisites
Course 7009, DeltaV Implementation I
Topics
• Batch Overview• Unit Phase• Alias Definition• Unit Module• Process Cell• Class Based Control Modules• Class Based Equipment Modules• Operation• Unit Procedure• Procedure• Equipment Trains• Unit Aliasing• Dynamic Unit Allocation
MA
NA
GE &
OP
TIM
ISE
Course 7018
This course is recommended for instrumentation and maintenance technicians, managers, and configuration engineers who need to know about DeltaV hardware. It provides an overview of the DeltaV Control Network, M- and S-series hardware, and software applications. Upon completion, you will be familiar with the hardware and be able to perform troubleshooting techniques.
Overview
This 4-day course focuses on the hardware components that make up the DeltaV system: M-series controllers and I/O, S-series controllers and I/O (including CHARMs), and DeltaV Smart Switches. Using a combination of lectures and workshops, you will learn how to use operator and diagnostic tools to identify and locate hardware-related fault conditions. Workshops provide the opportunity to disassemble and reassemble the M- and S-series hardware and return the system to an operating state.If your systems include bus technologies such as Foundation Fieldbus, we recommend courses 7030, 7032, or 7037. The 7018 course satisfies the prerequisite requirement for these bus courses. (except 7032)
Prerequisites
Windows Experience
Topics
• DeltaV Overview• Operator Alarms• DeltaV Diagnostics• DeltaV Smart Switches• DeltaV I/O Cards and Carriers• Controllers and Power Supplies• Electronic Marshalling (CHARMs)• HART I/O• DeltaV and AMS Suite: IntelligentDevice Manager• Redundant I/O
DeltaV Hardware and Troubleshooting
Course 7027
This 4-1/2 day course is designed for system engineers and administrators responsible for installing, commissioning, and managing a DeltaV system running on the Windows 7 operating system and Windows Server 2008.
Prerequisites
Highly recommended Course 7009, DeltaV Implementation I, or Course 7018, DeltaV Hardware and Troubleshooting
Topics
• Overview/Review of SystemComponents and Topologies• Installation Checklist of the Windows7 and Windows Server 2008 Operating Systems • Installation of the DeltaV SoftwareComponents • DeltaV Control Networks andRemote Access• DeltaV Domains and Workgroups• User Administration and NetworkSecurity• Upgrading Hardware and Software• Backup and Restore Procedures• Importing/Exporting• DeltaV Zones
DeltaV Systems Administration for Windows 7 and Server 2008
DeltaV Advanced Graphics
Course 7025 This 4-1/2 day course is for process control engineers responsible for configuring advanced functionality in the DeltaV user interface. This course expands on graphic topics covered in both the DeltaV Implementation, course 7009 and DeltaV Implementation II, course 7017.
PrerequisitesCourse 7009, DeltaV Implementation I
Topics• Visual Basic Primer• Forms• Modules• Schedules• User Preferences• Picture Sizing• Environment Customization• Custom Faceplates• Function Block Faceplates• FRS Functions• Pop Up Menus• Color Threshold Tables• Custom Dynamos• Tag Groups• Key Macro Editor• Theme Dynamos
www.EmersonProcessCourseAdvisor.com
5
Course 7032
This course is for individuals responsible for installing, troubleshooting, calibrating and configuring FOUNDATION™ fieldbus instruments and control strategies using the Delta V scaleable systems.
Overview
This 4-day lecture/lab provides maximum hands-on experience working with the integration of FOUNDATION™ fieldbus devices and the DeltaV scaleable system.The student will be able to install fieldbus instruments and segment checkout for the correct operation of the physical layer. The student will be able to use the DeltaV system to perform AMS Device Manager methods such as calibration, setup wizards, zero trim and diagnostics. The student will be able to implement a pressure loop using FOUNDATION™ fieldbus function blocks with the DeltaV Control Studio application. The student will configure PlantWeb Alerts and device alarm parameters.
Prerequisites
Course 7009 or Course 7018.The 375 Field Communicator and ValveLink for Fieldbus will be demonstrated and available for students as optional activities. Topics• FOUNDATION™ fieldbus Overview• Macro Cycle Execution• Fieldbus Function Blocks• Control Strategy Configuration• Control Anywhere• FieldVue Theory of Operation• Transmitter Theory of Operation• AMS Device Manager Methods• Fieldbus Wiring Practices• System Troubleshooting• Configuring Fieldbus Device• Alarms and PlantWeb Alerts• Configuring a Fieldbus OperatorDisplay• Segment Checkout Procedures
Fieldbus Systems and Devices
7
AMS Device Manager with DeltaV
Course 7039 CEUs: 3.2
OverviewThis 4-1/2 day course is for instrumentation technicians responsible for all areas of managing and ensuring the reliability of instrumentation in the plant process including startup and commissioning, normal operations, maintenance, and troubleshooting
PrerequisitesThe purchase of this course also includes access to the e7020 course prerequisite, at no extra charge and upon confirmed enrollment, the student will receive access to the e7020 online course (via e-mail) to take as a prerequisite prior to attending the instructor led course. Microsoft windows experience. Prospective attendees should first complete the eLearning e7020 AMS Device Manager Suite Primer.
TopicsŸ Topics
• DeltaV and PlantWeb Overview• AMS Device Manager Overview• Foundation Fieldbus Overview• ValveLink SNAP-ON Introduction• HART Overview• PROCONEX QuickCheck SNAP-ON• PROFIBUS Overview• PlantWeb Alerts• AMS Device Manager UserInterface• AMS Device Manager Help• AMS Device Manager PlantLocation Hierarchy• AMS Device Manager Browser• Monitoring System Alerts withAMS Device Manager• PROCONEX AlertTrack SNAP-ON• Device Replacement for HART,Fieldbus, and PROFIBUS Devices• AMS Device Manager Audit Trail• ValveLink SNAP-ON Tests andDiagnostics• AMS Device Manager CalibrationAssistant
This course is intended for technicians, engineers and other plant personnel who need to know how to design, install, setup, configure, maintain and troubleshoot Wireless Self Organising Networks and their components
Overview
This 2 day course explains how Self Organising Wireless Networks function and how they are installed, setup, configured and integrated. It emphasizes planning, proper installation and startup, configuration, maintenance, and integration. The course uses lectures and labs to maximise the hands on experience and teach the students. Students who complete this course will:• correctly install and setup the 1420Wireless Gateway• properly install and configureWireless Transmitters• properly integrate Host interfaces tothe Wireless Gateway
Prerequisites
Some experience in Networks and Host integration would be helpful.
Topics
• How Self Organising NetworksFunction• Self Organising Networks BestPractices• Network Components• 1420 Installation and Setup• Network Parameters• 648 and 3051S WirelessTransmitters Installation, Configuration, Maintenance and Calibration• Using AMS Device Manager withthe 1420 Wireless gateway• Configuring Wireless Devices withAMS Device Manager• Operation of AMS Wireless Snap-On• Modbus Serial Integration• Modbus TCP Integration
Wireless Self Organising Network
MA
NA
GE &
OP
TIM
ISE
MA
NA
GE &
OP
TIM
ISE
Course 7012
This course is for operators, supervisors and managers responsible for the operation of continuous processes using DeltaV system.
Overview
This 2-day course uses lectures and hands-on workshops to provide an in-depth overview on operating the DeltaV System. Students who complete this course will:
• access operator displays• manipulate various control moduleoperating parameters to operate the process• respond to process alarms• monitor process performance• view real-time and historical trenddata
Topics
• System Overview• Accessing DeltaV Operate Window,Menus Displays and Directories• Discrete and Analog Control ModuleOperation• Accessing Alarm Displays/AlarmHandling• Motor Control Module Operation• Regulatory/Cascade Control ModuleOperation• Accessing Real-time/Historical TrendData• Unit Alarms• Sequential Function Chart Operation• Phase Logic Modules
DeltaV Operator Interface for Continuous Control
DeltaV Operator Interface - Batch
Course 7014
This course is for operators, supervisors, and managers responsible for the operation of batch processes using DeltaV system.
Overview
This 2-1/2 day course uses lectures and hands-on workshops to provide an in-depth overview on operating the DeltaV System. It includes all content in course 7012 plus students will:
• understand basic batch terminology• manipulate Unit Module parameters• access the Batch Operator Interface• run procedures• review batch history data
Topics
• System Overview• Accessing DeltaV Operate• Window, Menus Displays andDirectories• Discrete, Analog, Regulatory andCascade Control Module Operation• Motor Control Module Operation• Accessing Alarm Displays/AlarmHandling• Accessing Real-time/Historical TrendData • Accessing Process History View• Sequential Function Chart Operation• Phase and Recipe Controls• Batch Operator Interface• Batch Historian• Campaign Manager
www.EmersonProcessCourseAdvisor.com
www.EmersonProcessCourseAdvisor.com
Micro Motion Coriolis Technician
8700 Series Smart Magnetic Flowmeter
8800 Smart Vortex Flowmeter
Course 2359This 2-day course is specifically designed for your technicians and engineers who are involved in the installation, commissioning, maintenance or use of Micro Motion mass flow meters. The course can be delivered in the following languages: English, German, French or Dutch.
Prerequisites Flow Knowledge of basic flow fundamentals. · Flow Knowledge of Microsoft Windows©.
TopicsŸ Micro Motion product overviewŸ Coriolis principle of operation Ÿ Sensor installation and start-up Ÿ Zero calibration, simulation and
outputs trimming Ÿ Transmitters' configuration and
Basic troubleshooting
Course 2340 This 1-day course uses lectures and labs to teach the student how to install, configure, calibrate, and maintain the Rosemount Smart Flowmeter System composed of the Model 8712 Smart Flowmeter Transmitter and the 8705 Flanged or 8711 Wafer Flow tube. The students will also learn the operation and interface capabilities of the Local Operator Interface, Field Communicator or AMS. Upon completion of course students will:• explain the differences andcapabilities of the Rosemount Magnetic Flowmeters• identify transmitter parts/explainfunctionality• explain Faraday's Law and theprinciples of operation of Magnetic Flowmeter system• configure and test transmitters usingthe LOI and Field Communicator or AMS• properly install/troubleshoot theRosemount Smart Magnetic Flowmeter systemPrerequisites Knowledge of basic flow fundamentals and instrumentation.
Topics• Magnetic Flowmeter System• Smart vs. Analog Transmitters• Flow Tube Selection• Configuring Using LOI,Communicator or AMS• Local Operator Interface Functions• Positive Zero Return• Auxiliary Functions and SpecialUnits• Signal Conditioning• System Troubleshooting andMaintenance• Bench Testing/Digital Trims
Course 2341 This 1-day course uses lectures and labs to teach the student how to install, configure and maintain the Rosemount Model 8800 Smart Vortex Flowmeter. The students will also learn the operation and interface capabilities of the Field Communicator. Students who complete this course will:• explain the advantages andlimitations of vortex flowmetering• identify 8800 parts and functionality• explain the Von Karmon effect andthe principles of vortex shedding• properly install and configure theModel 8800 Vortex• commission and troubleshoot theRosemount Model 8800
PrerequisitesKnowledge of basic flow fundamentals.
Topics• Vortex Flowmeter Applications• 8800 Vortex Flowmeter Overview• Von Karmon Effect and Principles ofVortex Shedding• Proper Installation• Field Communicator Operation• Start-Up and Commissioning• Configuring the 8800 using the FieldCommunicator or AMS• Troubleshooting and Maintenance• Digital Trims/Calibration/Verification• Digital Signal Processing
icro Motion, the pioneer in Coriolis technology and the world's leading producer of mass flow and
Mdensity meters, offers classes at our factory, regional locations, or at your plant. Rosemount'sleadership in the design, manufacture, and application of smart field instrumentation is
unchallenged for pressure, level, temperature, and flow measurement instruments to monitor and control processes.
Process Measurement Products III Level
Course 2333
This course is intended for technicians, engineers and other plant personnel who need to know installation, calibration, maintenance and troubleshooting of level measurement instrumentation.
This 3-day course explains how level instruments function and how they are installedcalibrated/verified. It emphasizes installation, proper setup and calibration/verification of level instruments. The course uses lectures and labs to teach the students. Those who complete this class will be able to:Ÿ correctly install DP?Level
TransmittersŸ correctly install Guided Wave
Radar TransmittersŸ correctly install Non-contacting
Radar TransmittersŸ properly calibrate Level
InstrumentsŸ perform basic troubleshooting
PrerequisitesExperience in instrument calibration, maintenance, installation and operation would be helpful.
TopicsŸ DP Level FundamentalsŸ Electronic Remote SensorsŸ Radar ApplicationsŸ Radar InstrumentsŸ Radar PC SoftwareŸ Field CommunicatorŸ InstallationŸ ConfigurationŸ Calibration / VerificationŸ Troubleshooting
AMS Device Manager with Rosemount HART Instruments
Course 7021
Learn the installation, calibration, maintenance, and troubleshooting of measurement instrumentation using AMS Device Manager. The hand's on focus is on skills required by engineers, technicians, or others that are new to the plant or instrument environment.
This 3-day course teaches maintenance and calibration of measurement devices using AMS Device Manager software to communicate and track information. The student will learn how pressure and temperature transmitters function, are installed, and calibrated using AMS Device Manager. The course uses hands-on training, labs, and lecture to teach the student how to:
Ÿ Configure and use AMS Device Manager
Ÿ Correctly perform transmitter installation and setup procedures
Ÿ Properly configure SMART transmitters
Ÿ Properly calibrate transmittersŸ Perform basic troubleshooting-
transmitters
Topics
Ÿ Configuring and Using AMS Device Manager
Ÿ HART CommunicationŸ SMART Transmitters (3051C,
3144P)Ÿ Test Equipment SelectionŸ Transmitter InstallationŸ Transmitter ConfigurationŸ Transmitter CalibrationŸ AMS Calibration ManagerŸ Intelligent CalibratorsŸ Transmitter Troubleshooting
www.EmersonProcessCourseAdvisor.com
Courses 2018
January-June
July-December
MonthJan
Jan Jan Jan Jan-Feb Feb Feb FebFeb-Mar Mar Mar Mar Mar Apr Apr Apr Apr
Apr-May May May May
May-June Jun Jun Jun
Date 1-5 8-12 15-19 22-26 29-2 5-9 12-16 19-23 26-2 5-9 12-16 19-23 26-30 2-6 9-13 16-20 23-27 30-4 7-11 14-18 21-25 28-1 4-8 11-15 18-22
Week 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Instrument Mesurement Courses Code
Micro Motion Coriolis Technician 2359 Sto M K
RF Vortex Technician 2341
RF Magmeter Technician 2340
Micro Motion Coriolis Advanced Technician
RF Vortex Advanced Technician
Instrument Fundamentals 2320 L SU M K
KAnalytic Fundamentals pH & Conductivity
Analytic Fundamentals Combustion O2
Wireless Self Organizing Network 2375
Process Measurement Level III 2333 Ste Ste
Tank Gauging Technical Product Traning RTG101 G G
Tank Master Training RTG102 G
Process Systems Courses
DeltaV Basic Implementation I 7009 K DK Ste K FI
DeltaV Batch 7016 K VC
DeltaV Implementation II 7017 K K
DeltaV Hardware & Troubleshooting 7018 Ste DK
DeltaV System Administration 7027 K
DeltaV Foundation Fieldbus 7032
AMS Device Manager with DeltaV 7039 K K
Month Jun Jul Jul Jul Jul Jul-Aug Aug Aug Aug Aug-Sep Sep Sep Sep Sep Oct Oct Oct Oct Oct-Nov Nov Nov NovNov-Dec Dec Dec Dec Dec
Date 25-29 2-6 9-13 16-20 23-27 30-3 6-10 13-17 20-24 27-31 3-7 10-14 17-21 24-28 1-5 8-12 15-19 22-26 29-2 5-9 12-16 19-23 26-30 3-7 10-14 17-21 24-28
Week 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
Instrument Measurement Courses Code
Micro Motion Coriolis Technician 2359 FI K
RF Vortex Technician 2341
RF Magmeter Technician 2340
Micro Motion Coriolis Advanced Technician K
RF Vortex Advanced Technician
Instrument Fundamentals 2320 G K FI DK K
Analytic Fundamentals Part 1 pH & Conductivity K
Analytic Fundamentals Part 2 Combustion O2
Wireless Self Organizing Network 2375 K
Process Measurement Level III 2333
Tank Gauging Technical Product Traning RTG101 G G
Tank Master Training RTG102 G
Process Systems Courses
DeltaV Basic Implementation I 7009 K K
DeltaV Batch 7016 K DK
DeltaV Implementation II 7017 K
DeltaV Hardware & Troubleshooting 7018 K
DeltaV Advanced Graphic 7025 K
DeltaV System Administration 7027 Ste K
DeltaV Foundation Fieldbus 7032 K
AMS Device Manager with DeltaV 7039 K K
DK=Denmark, FI=Finland, G=Gothenburg, K=Karlstad, L=Luleå, M=Malmö, Ste=Stenungsund, Sto=Stockholm, Su=Sundsvall, VC= Virtual Class
K
Choose and build your own learning path with our New Course Advisor at www.EmersonProcessCourseAdvisor.com
www.EmersonProcessCourseAdvisor.com
Contact us at [email protected] visit www.emersonprocess.com/education
Emerson Process Managementwww.EmersonProcessCourseAdvisor.com
