Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
1/3
MiG-29 interior S.A.
49 627
49 6271/48 scale detail set for kit • sada detailù pro model Great Wall Hobby 1/48 Great Wall Hobby
ORIGINAL KIT PARTSPÙVODNÍ DÍLY STAVEBNICE
PHOTO-ETCHED PARTSLEPTANÉ DÍLY
PARTS TO BE REMOVEDDÍLY K ODSTRANÌNÍ
FILLTMELIT
eduard
REMOVEODSTRANIT
OPTIONVOLBA?REPLACENAHRADIT
BENDOHNOUT
GRINDOBROUSIT
SYMETRICAL ASSEMBLYSYMETRICKÁ MONTÁŽ
DRILL HOLEVRTAT OTVOR
APPLY EXPRESS MASK AND PAINT BEFORE GLUINGPOUŽÍT EXPRESS MASK NABARVIT PRED SLEPENÍM
1 COLORED ETCHED PARTSLEPTANÉ BAREVNÉ DÍLY
28
28
18
3
23
4
22 5526
14
15
13
1253
52
49
45
44
17
25
3536
16
21
10
26 48
41
42
C43, C44, C72
=
3334
27
2
1
32
20
C47
6
19
9 29
C46
C68
C37
FILM
© EDUARD M.A. 2013 www.eduard.com Made in Czech Republic
eduardFor further detail sets look for 48 772 MiG-29 exterior(not included in this set)
eduardFor further detail sets look for 48 771 MiG-29 F.O.D.(not included in this set)
2/3 49 627
62
24
31 30
=
C66, C73
43
56
59
57
58
A1
47
61
60
C36
C39
PE14
5450
film
A1
PE8
39
38 37
51
40
C65, E2
8
7
11
=
C45
C38
C71
5
46
2 pcs.
E1
2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part.
2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem pøilepíte, pøi pokusu o odlepení dojde k poškození dílu.
3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na èásti dílù, na kterých je naneseno lepidlo.1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames.
1.Samolepící díly oddìlujte od rámeèku na podkladovém papíøe. Po oddìlení je sejmìte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive.
4. Samolepící díly berte za hrany nebo za èásti, na kterých není nanesené lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will be permanently affixed when pressed onto its intended location, its location can be adjusted.
5. Díl lehce položte do pozice, ve které má být nalepen. Upravte pøesnou pozici a pøimáèknìte. Díl dokonale pøilne až po pøimáèknutí, pøed pøimáèknutím lze dílem opatrnì manipulovat.
PARTS WITH GLUE DÍLY OPATØENÉ LEPIDLEM
3/3 49 627