Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Poultry Market Catalog
ECP SERIES NON-AUTOMATIC DESIGN FOR POULTRY EVAPORATIVE COOLING APPLICATIONS
Durable, powder-coated epoxy cast iron • construction
Glass-filled polypropylene base Glass-filled polypropylene base•
Stainless steel lifting handle and bolts Stainless steel lifting handle and bolts•
Non-clogging thermoplastic vortex impeller design Non-clogging thermoplastic vortex impeller design•
Passes 1/2” spherical solids Passes 1/2” spherical solids•
Oil-filled, hermetically sealed, automatic reset Oil-filled, hermetically sealed, automatic reset • thermal overload protected motorthermal overload protected motor
Silicon carbide / carbon seal•
Upper sleeve bearing and lower ball bearing • running in bath of oil
20 ft. UL listed power cord with molded 3-wire • plug
1-1/2” NPT vertical discharge•
Operates at temperatures to 130˚ F (54 C˚)•
C US
Tested to UL Standard UL778and Certifi ed to CSA
Standard CSA22.2 No. 108
FW0134 0409
Supersedes 0109
ECP Performance
Model No.
HP Volt Amps HzGallons Per Minute Lift
Capacity Shut Off Ft.
Total Ht.Total
WidthWt. Lbs.
Discharge NPT
5 Ft. 10 Ft. 15 Ft.
ECP301.30
115 9.7
60
47 37 25 20.5 10.063” 10.006” 22.4
1-1/2”
ECP302 230 4.8
ECP331.33
115 6.055 50 43 32 11.688”
10.094”
32.0ECP332 230 3.2
ECP401.40
115 8.569 64 55 39
12.125”
37.0ECP402 230 4.3
ECP501.50
115 10.577 70 61 44 39.0
ECP502 230 5.3
Features and Benefits
2 MMoving water . . . MMOne customer at a time.MM
Poultry Market Catalog
1/6 & 1/4 HP SUBMERSIBLE EVAPORATIVE UTILITY PUMPS
115V thermal overload protected PSC motor, • 1.5 amps
Environmentally friendly, oil-free motor runs • cooler and lasts longer
Thermoplastic body resists corrosion, stress • and heat
Vent hole prevents air lock•
1” male discharge with garden hose adapter • for easy hookup
Pumps floor dry to 1/8”; fits into 7” opening•
9’ double-sealed cord standard on UTFAL. •
Temperature rating: 120°F (49°C)•
1-year limited warranty•
2SUEL 1/4 HP
Automatic operation: Runs when • water is present, shuts off when dry
Environmentally friendly, oil-free • motor runs cooler and lasts longer
Thermoplastic body resists corrosion, • stress and heat
Vent hole prevents air lock•
1” male discharge with garden hose • adapter for easy hookup
Pumps floor dry to 1/8”; fits into 7” • opening
9’ double-sealed cord standard •
1-year limited warranty•
Automatic Operation
UTFAL 1/4 HP
50TC1/2 HP
Non-cloggingNooooooooonnnnnnn-----ccccclllllooooogggggggg
Vortex
Impeller
Rugged oil filled .4 HP, 115V, 60 Hz. • motor
Thermal overload protects against • overheating
Epoxy coated, cast iron design • dissipates motor heat to ensure long life
2” discharge with 2” solids pumping • capacity
Bottom suction inlet with vortex • impeller
15’ waterproof power cord with • grounded plug
Silicon carbide seal for reliable service • and extended life
Temperature Rating: 130ºF. (54ºC.)•
One year limited warranty•
1/2 HP SUBMERSIBLE EVAPORATIVE COOLING PUMP
Model HP
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft. 20 ft.
50TC 1/2 128 89 50 10
Developed for pressure • booster application in poultry house misting.
Rugged cast iron pump case • and ejector. Carbon/ceramic shaft seal.
1/2 and 3/4 HP 60 Hz., Single •
Phase, Dual Voltage Nema J Motor
Includes: special nozzle and • venturi, 1-1/4” x 3/4” reducer bushing, 200 lb. pressure gauge and 8 ft. power cord.*
POULTRY HOUSE MISTING PUMP1/2 and 3/4 HP Single Phase
Models CPH051622 and CPH071726
3MMoving water . . . MMOne customer at a time.MM
Poultry Market Catalog
BOOSTER PUMPS CJ103 SERIES
Available in 1/3 HP thru 2 HP models.•
Rugged cast iron volute •
Brass impellers electronically balanced.•
Discharge can be rotated for either horizontal or vertical • Installations.
Designed for easy service without disrupting suction or • discharge piping.
CAPACITIES TO 80 GPM, PRESSURES TO 45 PSI
CENTRIFUGAL BOOSTER PUMPS
C USUL Std. No. 778
MULTI STAGE HIGHER PRESSURE CJ101 SERIES
Brass Impellers dynamically balanced for high • efficiencies and long life.
More water at higher pressures -engineered for high • head applications.
Cast iron volute with brass insert bearing and closed • top bearing for rugged durability and long life.
Available in 2-stage or 3 stage models up to 3 HP.•
Maximum case pressure of 160 PSI.•
CAPACITIES TO 60 GPM, PRESSURES TO 95 PSI
C USUL Std. No. 778
Product may not be as shown
10” FILTER HOUSINGSModel
Number Pipe Size SumpMax
Pressure Case Qty.*Included
O-Ring † Bracket † WrenchFH1034O-12 3/4” Opaque
100 PSI 12 FHOR1B FHMB02 FW10FFH1034C-12 3/4” Clear
10” FILTER HOUSINGS (VALVE-IN-HEAD)Model
Number Pipe Size SumpMax
Pressure Case Qty.*Included
O-Ring † Bracket † WrenchFH1034VH-12 3/4” Clear 100 PSI 12 FHOR1B FHMBU1 FW10F
10” POLYPROPYLENE STRING WOUND
Part No. Construction TypeMicron Rating
Maximum Flow (gpm) Application Case Qty.*
SW1005-24String Wound
5 10Dirt Rust Sediment
24SW1010-24 10 10SW1020-24 20 10
FILTER HOUSINGS AND CARTRIDGES
Full line of fi lter housings from 3/8” to 1-1/2” inlet and outlet. All housings shipped with pressure relief valve. All fi lter
housings include wrench, mounting bracket and extra o-ring.
BRACKETS, WRENCHES AND O-RINGSPart Number Description
FHMB02 Mounting Bracket and ScrewsFW10F Full Wrench - 10” Housings
FHMBU1 U-Shaped mounting bracket and screws
Flint & Walling, Inc. • 95 North Oak Street • Kendallville, IN 46755800-345-9422 • Fax: 260-347-0909 • www.flintandwalling.com
4 MMoving water . . . MMOne customer at a time.MM
Poultry Market Catalog
Flint & Walling’s service plus • 56-frame, NEMA J, dual voltage motors—single or three phase.
Three-wire, 8 foot 115 volt • grounded power cord and plug supplied on 1/3 HP single phase models. (Not supplied on any other model).
Thermoplastic impellers and • diffusers.
Cast Iron Model Pump Components—Cast Iron suction and discharge castings, S.S. pump shell, 416 S.S. hex pump shaft and carbon/ceramic seal with Buna N rubber parts.
Powder Coated Model Pump Components—Powder coated cast iron suction and discharge castings, S.S. pump shell, 416 S.S. hex pump shaft and carbon/ceramic seal with Buna N rubber parts.
Stainless Steel Model Pump Components—S.S. suction and discharge castings, S.S. pump shell, 303 S.S. hex pump shaft and carbon/ceramic seal with Viton rubber parts.
Booster Pump with F&W NEMA J Motor
PRESSURE BOOSTER “PB” SERIES PUMPS 1/3 - 3 HP • 5, 7, 10, 19, 27, 35, 55 & 85 GPM
Applications: Pressure Cleaning, Spray or Mist Systems, Jockey Pumps, Booster Service, Reverse Osmosis, Water Circulation and General Purpose Pumping.
PRESSURES TO 200 PSI— 140°F MAXIMUM LIQUID TEMPERATURE
C USUL Std. No. 778
ENGINEERED POULTRY PUMPING SYSTEMSDeliver Flow and Pressure Where You Want It!
Engineered boosting system provides constant water • pressure. (System can be adjusted for pressure.)
Pre-plumbed, pre-wired, pre-programmed and • pressure tested
Typical installation time less than 1 hour•
Skid mounted system is “powder coated” to resist rust•
Models available from 50 to 200 gallon per minute•
2 HP thru twin 7.5 HP•
Operates on 230v single phase power•
Small footprint fits through any 35” access door•
Advanced “on board” diagnostics • and pump protection
Variable frequency drive (VFD) soft starts motor for • long life
Significantly less electrical consumption over • conventional centrifugal pump applications.
System includes priming port, check valve & unions.•