Click here to load reader
Upload
dangdat
View
213
Download
1
Embed Size (px)
Citation preview
EcoStor™ DC Solar Indirect SystemDual Coil Heat Exchanger Backup Models
The EcoStor™ Dual Coil Models feature:■ Applications—Dual heat exchangers located inside the tank may be
connected to a variety of different heating systems. Solar heating, Spaceheating, Geothermal heating, and Boiler heating. The above systems canalso be utilized in separate, or in combined configurations resulting ingreater application flexibility.
■ Dual Coil Design—A single wall, 11⁄2" (38mm) O.D. glass coated (Vitraglas®)carbon steel heat exchanger is located in the upper portion of tank andprovides enhanced heat transfer capability. A double wall, 11⁄2" O.D. glasscoated (Vitraglas®) carbon steel heat exchanger is located in the lowerportion of tank and provides additional protection between the heating fluidand surrounding hot water.
■ Internal Single Wall Heat Exchanger—Single Wall 11⁄2" O.D. glass coated(Vitraglas®) steel coil. The coil has a heat transfer area of 14.2 sq. ft. (1.32sq. m.) and a stored water volume of 2.5 gal. (9.4L) Maximum supplytemperature from the solar collector must not exceed 250°F (121°C).-- 1" (25mm) NPT Front Supply and Return Connections.
■ Sensor Wires for Solar Thermistor Connections—Twisted wires areprovided under the Upper and Lower covers. These wires have beenprovided as a means for connecting thermistors to a solar controller(Thermistors and Solar Controller are not provided).
■ Factory Installed Hydrojet® Total Performance System—Cold water inletsediment reducing device helps prevent sediment build up in tank.Increases first hour delivery of hot water while minimizing temperature buildup in tank.
■ Vitraglas® Lining—Bradford White tanks are lined with an exclusivelyengineered enamel formula that provides superior tank protection from thehighly corrosive effects of hot water. This formula (Vitraglas®) is fused to thesteel surface by firing at a temperature of over 1600°F (871°C).
■ Fully Automatic Controls—Two surface mounted thermostats with hightemperature cut-off devices are located in the upper and lower coverlocations. Designed for applications such as a boiler where a specifictemperature is desired to control a circulator.
■ 2" (51mm) Non-CFC Foam Insulation—Covers the sides and top of tank,reducing the amount of heat loss. This results in less energy consumption,improved operation efficiencies and jacket rigidity.
■ Potable Water Connections—3⁄4" (19mm) NPT factory installed truedielectric fittings extend water heater life and eases installation.
■ Two Protective Anode Rods—Provide added protection against corrosionfor long trouble-free service.
■ T&P Relief Valve—Included.■ Low Restriction Brass Drain Valve—Durable tamper proof design.■ Thermostatic Mixing Valve (ASSE Approved)—Included.
6 Year Limited Tank Warranty / 6-Year Limited Warranty on Component Parts.For more information on warranty, please visit www.bradfordwhite.comFor products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See completecopy of the warranty included with the heater.
Photo is ofS-DC-DW2-55R6SW
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984;8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS:2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation.
502-B-0914-A
Dual Coil Heat Exchanger Backup Models Meet or exceed ASHRAE 90.1b (current standard)
ModelNumber
Approx.ShippingWeight
lbs.
AFloor toHeater
Top
in.
CFloor toWaterConn.
in.
BJacketDia.
in.
Capacity
S-DC-DW2-55R6SWS-DC-DW2-70R6SWS-DC-DW2-110R6SW
U.S.Gal.
5570110
Imp.Gal.
465892
591/4
591/4
621/2
623/4
623/4
66
282313442
2224
281/4
EFloor to Upper
CollectorSupply
in.
5656
573/4
371/2
371/2
391/4
5353
553/4
DFloor to
T&PConn.
in.
ModelNumber
Approx.ShippingWeight
kg.
AFloor toHeater
Top
mm.
CFloor toWaterConn.
mm.
BJacketDia.
mm.
Capacity
S-DC-DW2-55R6SWS-DC-DW2-70R6SWS-DC-DW2-110R6SW
Liters
208265416
150415041593
159415941676
95107154
559609717
EFloor to Upper
CollectorSupplymm.
749749749
FFloor to Upper
CollectorReturn
in.
FFloor to Upper
CollectorReturnmm.
187187187
271/2
271/2
271/2
GFloor to Lower
CollectorSupply
in.
GFloor to Lower
CollectorSupplymm.
699699699
53/8
53/8
53/8
HFloor to Lower
CollectorReturn
in.
HFloor to Lower
CollectorReturnmm.
137137137
134613461416
DFloor to
T&PConn.
mm.
EcoStor™ Indirect Water Heater System
GeneralAll water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All potable water and electrical connectionsare 3⁄4" NPT (19mm) on 8" (203mm) centers. All models ETL listed.Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. Suitable for Water (Potable) Heating and Space Heating.Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable side of this system. The potable side may NEVER beconnected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
CD
H
GF
E
A
B Solar Sensor Wiring Junction Box
Electric WiringJunction Box
SolarThermistorWiresandThermostat
SolarThermistorWiresandThermostat
Printed in U.S.A.502-B-0914-A
©2014, Bradford White Corporation. All rights reserved.
Ambler, PAFor U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931 ● Fax 215-641-1670 / Technical Support 800-334-3393 ● Fax 269-795-1089 ● Warranty 800-531-2111 ● Fax 269-795-1089International: Telephone 215-641-9400 ● Telefax 215-641-9750 / www.bradfordwhite.com
Sales / Technical Support 866-690-0961 / 905-238-0100 ● Fax 905-238-0105 / www.bradfordwhite.com
0.00
2.00
4.00
6.00
8.00
10.00
12.00
0.00
5.00
10.00
15.00
20.00
25.00
Single-wall (Upper Coil)
Double-wall (Lower Coil)
Heat Exchanger Pressure Drop Curve
Flow Rate (GPM)
Pres
sure
Dro
p (P
SI)
Head
Los
s (ft
. w.c
.)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18