SOLID SHINE

A new light source with long-lasting brightness

SOLID SHINE Technology Reduces Running Costs

Mercury Free

Long-lasting brightness continues for approximately 20,000

hours. Moreover, the SOLID SHINE Series’ linear brightness

drop provides greater brightness over a given time. This helps

to lower maintenance requirements by eliminating the need for

lamp replacement and reducing running costs.

yy

The principle of lamp emission The principle of LED emission

Mercury is required.

Mercury Free!

Environment-friendly

The lamp emits ultraviolet light generated from

mercury atoms to excite the phosphor.

PhosphorUltraviolet light

Electrons

Mercury atom

Glass tube

Visible light

Arc tube

Compliant with the RoHS Directive

Less wasted power consumption.

Wasted power consumption is reduced since the warm-up and

cool-down processes are unnecessary.

Quick On/Off

Conventional Lamp Projector LED/Laser Projector

Brig

htn

ess

Brig

htn

ess

Visible brightness

100% 100%Start-up time

Time TimePower is turned on

Power is turned on

Light source goes onLamp goes on

Start-up time

Saving you the cost of

5 lamps

Cost-Effective

For example, when used in a classroom, etc., many exchange the

lamp after about 2,000 – 3,000 hours. The new light source can

maintain the same lamp brightness for about 10,000 hours.

Example: Lamp Cost $193 (€145)/pc

$193 × 5 pcs = $965 (€725)

Professional model Basic model

The emission of light

Electron flowCurrent

P-type semiconductor

N-type semiconductor

The LED is a semiconductor, and light is

generated by the recombination of holes and

electrons. Therefore, no mercury is required.

3,500 lm 20,000:1Full HDPT-RZ470K

3,500 lm 20,000:1WXGAPT-RW430K

3,500 lm 10,000:1Full HDPT-RZ370

3,500 lm 10,000:1WXGAPT-RW330

Ecology-Conscious LED/Laser Projectorswith an Excellent Total Cost of Ownership

The substances that are designated as hazardous are not used.

* White cabinet models (PT-RZ470W and PT-RW430W) also available.

*

*

6,000 hr

20,000 hr

100%

Lightsourcelife A conventional

long-life lamp

LED/LaserNew Light

Source

Hours20,00015,00010,0005,000

Brightness

66,6 000 hhr

20,000 hr

Lighhttsourceelife A conventional

long-life lamp

Hours20,00015,015,000000110,0005,000

In 10,000 hours

AverageLamp-replacement brightness cut off

[Example] Brightness100%

2,000 hr 2,000 hr 2,000 hr 2,000 hr 2,000 hr

10,000 hrHours

2013/03/11　23:24 J:CTHBM　X_FK

YM

CBL

CO² Emission Reduction

ECONormal

100

200

300

PT-SSIECO Printed in Japan.

All information included here is valid as of March 2013.

The new light source reduces power consumption compared to

conventional models.

* Calculated assuming 8 hours of use per day, 250 days per year, for a total of 2,000 hours/year.

* The formula used for CO² conversion was 0.41 kg CO²/kWh. (Based on data published by Japan’s

Ministry of the Environment.)

Conventional LCD model A

SOLID SHINE Series

Low power consumption

Low heat dissipation

Further Power Consumption Reductionwith Eco Save 1/2 Modes

Normal Mode*250 W

Eco Save 1 Mode*200 W

Eco Save 2 Mode*178 W

-20%

Powerconsumption

Approx.

-30%

Powerconsumption

Approx.

*With the Picture mode set to Standard or Graphic.

NOTE: Based on the IEC 62087 Ed. 2.0 measurement method.

Power consumption may vary depending on the projected scenes.

Max. power consumption: 460 W

Conventional lamp projector with equivalent brightness

Ambient air temperature is affected.

• Requires air conditioning adjustment Increases air conditioner cost, wastes power consumption

• You have to wait until the projector temperature lowers before shutdown, etc.

Exhaust temperatureApprox. 60°C

Ambient air temperature isn’t affected.

• No need to worry about air conditioning Lowers air conditioner cost, reduces wasted power consumption

• Makes it possible to tidy up the room immediately after use

LED/Laser projectorExhaust temperatureApprox. 40°C

Heat pipe system

Example: When traveling to a place 30 km away (Fuel consumption: 15 km/L)

• Lowers running cost

• Mercury free

• No need for a special recycling process.

CO2

Maintenance Free for 20,000 Hours

Lamp/Filter Free

Maintenance time and cost Labor cost Traffic movement CO² emission

Less hassle to control the temperature around the projector

• Can be turned on/off only when required

• Reduces power consumption

• No waiting time for warming up

• No delay for lessons or meetings

• No need to worry about air conditioning

• Safe and comfortable for children

Lamp/Filter Free Low Heat DissipationNOTE: Total CO² emission is 4.64 kg/per visit2L × 2.3*/30 km = Approx. 0.15 kg/km

Low Heat DissipationAmbient temperature is not affected and no influence on other equipment

Professionalmodel

Basicmodel

Projector doesn’t get hot

* CO² emission coefficient of gasoline

Eco Points and Advantages Summary Eco Points and Advantages Summary

Reduces CO² emission by approximately 26%

Reduces CO² emission by approximately 24%

The Eco-Friendliness of the SOLID SHINE Series

Maintenance-Free and Quick On/Off

• No need to carry a ladder across campus

• Mercury free

• No need to keep stock

• No need to dispose of used lamps

(Light resource setting)

(W)

The projectors in this leaflet are intended to project images onto a screen. They are not intended for use as lighting equipment for ordinary homes.Specifications and appearance are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. All trademarks are the property of their respective trademark owners. © 2013 Panasonic Corporation. All rights reserved.

* Test room: 8 m x 8 m x 2.5 m = 160 m3. * The test room assumes complete insulation. * Calculated when the quantity of heat required to raise the temperature of 1 m3 of air by 1°C is defined as 0.288 kcal.

1,123 Btu / 283 kcal x 5 h = 1,415 kcal 850 Btu / 214 kcal x 5 h = 1,070 kcal

Conventional lamp projector LED/Laser projector

Test room: 8 m x 8 m x 2 5 m = 160 m* Te* Test rst roooom: 8 m88 m x 8x 8 m x 2 5 m = 160 m33 ** The test rooom aom ssums mes complete insulationTheThe ttest roomom aom assumssummees complete insuulation * Calculated when the quantity oof heat required too raise the ttemmperatture of 11 mCalculated when the quantity oof heat reqrequireuir d toto raise the ttemmperaatuture oof 11 m3 of air by 1 C is defined as 0 2288 kkcalof air by 1°C is defined as 0 28288 kc8 kckcalalalal

x = x =850 Btu / 214 kcall1,415 kcal5 h1,1, 23 Btu / / 28328 kcal 1070,070 kcakcal5 h5

Conventional lamp projector LED/Laser projectorLaser projector

A difference of 7.5°C occurs in the room temperature when used for 5 hours.

30.7 °C 23.2 °C

2013/03/11　23:24 J:CTHBM　X_FK

YM

CBL