70
Annex III List of activities for which accreditation has been terminated (Notification Letter No. HOKLAS004-271; Effective date of termination: 21 January 2020) NL No.: HOKLAS004-271, Annex III Page 1 of 1 CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm. 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 Environmental Testing 環境測試 ITEM TESTED OR MEASURED 測試或量度項目 SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性 SPECIFICATION, STANDARD METHOD OR TECHNIQUE USED 規範、標準方法或應用技術 Accreditation of the following tests has been terminated Trace Metals (acid extractable): - Water - Lead In-house method TG-ENV-WW-070 (screening method by anodic stripping voltammetry)

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-271 Effective date of termination 21 January 2020)

NL No HOKLAS004-271 Annex III Page 1 of 1

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Trace Metals (acid extractable) -

Water - Lead In-house method TG-ENV-WW-070

(screening method by anodic stripping

voltammetry)

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 1 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Care performance tests -

General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2015

AATCC Test Method 150-2012

AS 200154-2005

- Determination of dimensional changes BS EN ISO 3759 2011

ISO 3759 2011

(for the above two standards using the following

standards for specimen treatment

EN ISO 6330 2000

ISO 6330 2000 + A1 2008

ISO 6330 2012

BS EN ISO 5077 2008

ISO 5077 2007

(for the above two standards using the following

standards for specimen treatment

EN ISO 6330 2000

ISO 6330 2000 + A1 2008

ISO 6330 2012

- Spirality ISO 16322-2 2007

Chemical analysis -

General Textiles and Garments - pH value AATCC Test Method 81-2016

ISO 3071 2005

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 2 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Colour fastness tests -

General Textiles and Garments - Artificial salvia DIN V 53160-1 2010

- Bleaching (hypochlorite) ISO 105 N01 1993

- Chlorinated water AATCC Test Method 162-2011

AS 200145-1998

BS EN ISO 105 E03 2010

- Dry cleaning AATCC Test Method 132-2013

AS 2001416-1981

BS EN ISO 105 D01 2010

ISO 105 D01 2010

BS EN ISO 105 D02 2016

ISO 105 D02 2016

- Hot pressing AATCC Test Method 133-2013

AS 200146 - 1990

BS EN ISO 105 X11 1996

ISO 105 X11 1994

- Light (Xenon arc lamp tester) BS EN ISO 105 B02 2014 Methods 2 and 4

ISO 105 B02 2014 Methods 2 amp 4

- Non-chlorine bleach AATCC Test Method 172-2016

- Perspiration AATCC Test Method 15-2013

AS 20014E04-2005

AS 2001417-1980

BS EN ISO 105 E04 2013

ISO 105 E04 2013

JIS L0848-2004

- RubbingCrocking AATCC Test Method 8-2016

AS 200143-1995

BS EN ISO 105 X12 2016

ISO 105 X12 2016

JIS L0849-2013 Type I

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 3 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Colour fastness tests - (contrsquod)

General Textiles and Garments - Sea water AATCC Test Method 106-2013

AS 20014E02-2001

BS EN ISO 105 E02 2013

- Sublimation in storage JIS L0854-2001

- Washing (full temperature range) AATCC Test Method 61-2013

AS 2001415-2006

BS EN ISO 105 C06 2010

ISO 105 C06 2010

BS EN ISO 105 C10 2007

JIS L0844-2005

- Water AATCC Test Method 107-2013

AS 20014E01-2001

BS EN ISO 105 E01 2013

ISO 105 E01 2013

JIS L0846-2004 Method A

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 4 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Construction tests -

General Textiles and Garments - Fabric weight AS 2001213-1987

ASTM D3776D3776M-09a(2013)

BS EN 12127 1998

ISO 3801 1977

- Fabric width ASTM D3774-16

- Fabric width and length (for length shorter BS EN 1773 1997

than 2m) ISO 22198 2006

- Threads per unit length woven AS 200125-1991

ASTM D3775-12

ISO 7211-2 1984

- Twist of yarn ASTM D1423-16

BS EN ISO 2061 2015

ISO 2061 2015

- Yarn linear density

a) woven and weft knit fabric ASTM D1059-01

BS ISO 7211-5 2002

ISO 7211-5 1984

b) yarn in skein form BS EN ISO 2060 1995

ISO 2060 1994

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 5 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis -

General Textiles and Garments - Fibre content BS EN ISO 1833-1 2010

(quantitative method - mechanical ISO 1833-1 2006 + Cor1 2009

separation and chemical analysis) (Note The above Part 1 standard should be used in

conjunction with other parts of BS EN ISO 1833

or ISO 1833 for particular fibre mixtures)

BS EN ISO 1833-2 2010

ISO 1833-2 2006

BS EN ISO 1833-3 2010

ISO 1833-3 2006

BS EN ISO 1833-4 2010

ISO 1833-4 2006

BS EN ISO 1833-5 2010

ISO 1833-5 2006

BS EN ISO 1833-6 2010

ISO 1833-6 2007

BS EN ISO 1833-7 2010

ISO 1833-7 2006

BS EN ISO 1833-8 2010

ISO 1833-8 2006

BS EN ISO 1833-9 2010

ISO 1833-9 2006

BS EN ISO 1833-10 2010

ISO 1833-10 2006

BS EN ISO 1833-11 2010

ISO 1833-11 2006

BS EN ISO 1833-12 2010

ISO 1833-12 2006

BS EN ISO 1833-13 2010

ISO 1833-13 2006

BS EN ISO 1833-14 2010

ISO 1833-14 2006

BS EN ISO 1833-16 2010

ISO 1833-16 2006

BS EN ISO 1833-17 2010

ISO 1833-17 2006

BS EN ISO 1833-18 2010

ISO 1833-18 2006

BS EN ISO 1833-21 2010

ISO 1833-21 2009

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 6 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis - (contrsquod)

General Textiles and Garments - Fibre content AATCC Test Method 20-2013

(qualitative method) lt Excluding the following gt

Tests for RI MP and SG

- Fibre content AATCC Test Method 20A-2014

(quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and

separation and chemical analysis) Cl 15 to 18

BS 4407 1988

lt Excluding the following gt

Section four - Methods 13 17 and 18

EU Regulation 10072011 amp 2862012

lt Excluding the following gt

Chapter 4 Method 15 of Annex VIII Annex X

- Fibre diameter ISO 137 2015

(animal fibres yarn and fabric only) ASTM D2130-13

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 7 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

General Textiles and Garments - Vertical test BS 5438 1976

lt Excluding the following gt

Section 3 ndash Tests 1 and 3

BS EN 1103 2005

EN 1103 2005

lt Excluding the following gt

Cl 4 (Dry-cleaning pretreatment)

Specific products

- Bed covers and pillows - Ignitability by smouldering and flaming BS 7175 1989 (1994)

ignition source BS EN ISO 12952-1 1999

EN ISO 12952-1 1998

ISO 12952-1 1998

BS EN ISO 12952-2 1999

EN ISO 12952-2 1998

ISO 12952-2 1998

- Childrenrsquos Sleepwear - Vertical test US 16 CFR Part 1615

US 16 CFR Part 1616

BS EN 14878 2007

- Curtains amp drapes - Vertical test BS 5867-2 1980 with Amendment No 1

lt Excluding the following gt

Cl 51 amp 53 Types A and C performance

requirements

BS 5867-2 2008

lt Excluding the following gt

Cl 5 Durability to dry cleaning process

Cl 64 Type C performance

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 8 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests (contrsquod)

Specific products (contrsquod)

- Materials used in upholstered furniture California Technical Bulletin 117 ndash 2013

State of California Department of

Consumer Affairs Bureau of Electronic amp

Appliance Repair Home Furnishings and

Thermal Insulation

- Resilient filling material test Section 3

- Decking material test Section 4

- Materials used in upholstered furniture - Cigarette test ASTM E1353-08ae1

lt Excluding the following gt

Section 16 17 18 and 19

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 2: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 1 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Care performance tests -

General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2015

AATCC Test Method 150-2012

AS 200154-2005

- Determination of dimensional changes BS EN ISO 3759 2011

ISO 3759 2011

(for the above two standards using the following

standards for specimen treatment

EN ISO 6330 2000

ISO 6330 2000 + A1 2008

ISO 6330 2012

BS EN ISO 5077 2008

ISO 5077 2007

(for the above two standards using the following

standards for specimen treatment

EN ISO 6330 2000

ISO 6330 2000 + A1 2008

ISO 6330 2012

- Spirality ISO 16322-2 2007

Chemical analysis -

General Textiles and Garments - pH value AATCC Test Method 81-2016

ISO 3071 2005

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 2 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Colour fastness tests -

General Textiles and Garments - Artificial salvia DIN V 53160-1 2010

- Bleaching (hypochlorite) ISO 105 N01 1993

- Chlorinated water AATCC Test Method 162-2011

AS 200145-1998

BS EN ISO 105 E03 2010

- Dry cleaning AATCC Test Method 132-2013

AS 2001416-1981

BS EN ISO 105 D01 2010

ISO 105 D01 2010

BS EN ISO 105 D02 2016

ISO 105 D02 2016

- Hot pressing AATCC Test Method 133-2013

AS 200146 - 1990

BS EN ISO 105 X11 1996

ISO 105 X11 1994

- Light (Xenon arc lamp tester) BS EN ISO 105 B02 2014 Methods 2 and 4

ISO 105 B02 2014 Methods 2 amp 4

- Non-chlorine bleach AATCC Test Method 172-2016

- Perspiration AATCC Test Method 15-2013

AS 20014E04-2005

AS 2001417-1980

BS EN ISO 105 E04 2013

ISO 105 E04 2013

JIS L0848-2004

- RubbingCrocking AATCC Test Method 8-2016

AS 200143-1995

BS EN ISO 105 X12 2016

ISO 105 X12 2016

JIS L0849-2013 Type I

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 3 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Colour fastness tests - (contrsquod)

General Textiles and Garments - Sea water AATCC Test Method 106-2013

AS 20014E02-2001

BS EN ISO 105 E02 2013

- Sublimation in storage JIS L0854-2001

- Washing (full temperature range) AATCC Test Method 61-2013

AS 2001415-2006

BS EN ISO 105 C06 2010

ISO 105 C06 2010

BS EN ISO 105 C10 2007

JIS L0844-2005

- Water AATCC Test Method 107-2013

AS 20014E01-2001

BS EN ISO 105 E01 2013

ISO 105 E01 2013

JIS L0846-2004 Method A

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 4 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Construction tests -

General Textiles and Garments - Fabric weight AS 2001213-1987

ASTM D3776D3776M-09a(2013)

BS EN 12127 1998

ISO 3801 1977

- Fabric width ASTM D3774-16

- Fabric width and length (for length shorter BS EN 1773 1997

than 2m) ISO 22198 2006

- Threads per unit length woven AS 200125-1991

ASTM D3775-12

ISO 7211-2 1984

- Twist of yarn ASTM D1423-16

BS EN ISO 2061 2015

ISO 2061 2015

- Yarn linear density

a) woven and weft knit fabric ASTM D1059-01

BS ISO 7211-5 2002

ISO 7211-5 1984

b) yarn in skein form BS EN ISO 2060 1995

ISO 2060 1994

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 5 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis -

General Textiles and Garments - Fibre content BS EN ISO 1833-1 2010

(quantitative method - mechanical ISO 1833-1 2006 + Cor1 2009

separation and chemical analysis) (Note The above Part 1 standard should be used in

conjunction with other parts of BS EN ISO 1833

or ISO 1833 for particular fibre mixtures)

BS EN ISO 1833-2 2010

ISO 1833-2 2006

BS EN ISO 1833-3 2010

ISO 1833-3 2006

BS EN ISO 1833-4 2010

ISO 1833-4 2006

BS EN ISO 1833-5 2010

ISO 1833-5 2006

BS EN ISO 1833-6 2010

ISO 1833-6 2007

BS EN ISO 1833-7 2010

ISO 1833-7 2006

BS EN ISO 1833-8 2010

ISO 1833-8 2006

BS EN ISO 1833-9 2010

ISO 1833-9 2006

BS EN ISO 1833-10 2010

ISO 1833-10 2006

BS EN ISO 1833-11 2010

ISO 1833-11 2006

BS EN ISO 1833-12 2010

ISO 1833-12 2006

BS EN ISO 1833-13 2010

ISO 1833-13 2006

BS EN ISO 1833-14 2010

ISO 1833-14 2006

BS EN ISO 1833-16 2010

ISO 1833-16 2006

BS EN ISO 1833-17 2010

ISO 1833-17 2006

BS EN ISO 1833-18 2010

ISO 1833-18 2006

BS EN ISO 1833-21 2010

ISO 1833-21 2009

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 6 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis - (contrsquod)

General Textiles and Garments - Fibre content AATCC Test Method 20-2013

(qualitative method) lt Excluding the following gt

Tests for RI MP and SG

- Fibre content AATCC Test Method 20A-2014

(quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and

separation and chemical analysis) Cl 15 to 18

BS 4407 1988

lt Excluding the following gt

Section four - Methods 13 17 and 18

EU Regulation 10072011 amp 2862012

lt Excluding the following gt

Chapter 4 Method 15 of Annex VIII Annex X

- Fibre diameter ISO 137 2015

(animal fibres yarn and fabric only) ASTM D2130-13

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 7 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

General Textiles and Garments - Vertical test BS 5438 1976

lt Excluding the following gt

Section 3 ndash Tests 1 and 3

BS EN 1103 2005

EN 1103 2005

lt Excluding the following gt

Cl 4 (Dry-cleaning pretreatment)

Specific products

- Bed covers and pillows - Ignitability by smouldering and flaming BS 7175 1989 (1994)

ignition source BS EN ISO 12952-1 1999

EN ISO 12952-1 1998

ISO 12952-1 1998

BS EN ISO 12952-2 1999

EN ISO 12952-2 1998

ISO 12952-2 1998

- Childrenrsquos Sleepwear - Vertical test US 16 CFR Part 1615

US 16 CFR Part 1616

BS EN 14878 2007

- Curtains amp drapes - Vertical test BS 5867-2 1980 with Amendment No 1

lt Excluding the following gt

Cl 51 amp 53 Types A and C performance

requirements

BS 5867-2 2008

lt Excluding the following gt

Cl 5 Durability to dry cleaning process

Cl 64 Type C performance

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 8 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests (contrsquod)

Specific products (contrsquod)

- Materials used in upholstered furniture California Technical Bulletin 117 ndash 2013

State of California Department of

Consumer Affairs Bureau of Electronic amp

Appliance Repair Home Furnishings and

Thermal Insulation

- Resilient filling material test Section 3

- Decking material test Section 4

- Materials used in upholstered furniture - Cigarette test ASTM E1353-08ae1

lt Excluding the following gt

Section 16 17 18 and 19

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 3: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 2 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Colour fastness tests -

General Textiles and Garments - Artificial salvia DIN V 53160-1 2010

- Bleaching (hypochlorite) ISO 105 N01 1993

- Chlorinated water AATCC Test Method 162-2011

AS 200145-1998

BS EN ISO 105 E03 2010

- Dry cleaning AATCC Test Method 132-2013

AS 2001416-1981

BS EN ISO 105 D01 2010

ISO 105 D01 2010

BS EN ISO 105 D02 2016

ISO 105 D02 2016

- Hot pressing AATCC Test Method 133-2013

AS 200146 - 1990

BS EN ISO 105 X11 1996

ISO 105 X11 1994

- Light (Xenon arc lamp tester) BS EN ISO 105 B02 2014 Methods 2 and 4

ISO 105 B02 2014 Methods 2 amp 4

- Non-chlorine bleach AATCC Test Method 172-2016

- Perspiration AATCC Test Method 15-2013

AS 20014E04-2005

AS 2001417-1980

BS EN ISO 105 E04 2013

ISO 105 E04 2013

JIS L0848-2004

- RubbingCrocking AATCC Test Method 8-2016

AS 200143-1995

BS EN ISO 105 X12 2016

ISO 105 X12 2016

JIS L0849-2013 Type I

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 3 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Colour fastness tests - (contrsquod)

General Textiles and Garments - Sea water AATCC Test Method 106-2013

AS 20014E02-2001

BS EN ISO 105 E02 2013

- Sublimation in storage JIS L0854-2001

- Washing (full temperature range) AATCC Test Method 61-2013

AS 2001415-2006

BS EN ISO 105 C06 2010

ISO 105 C06 2010

BS EN ISO 105 C10 2007

JIS L0844-2005

- Water AATCC Test Method 107-2013

AS 20014E01-2001

BS EN ISO 105 E01 2013

ISO 105 E01 2013

JIS L0846-2004 Method A

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 4 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Construction tests -

General Textiles and Garments - Fabric weight AS 2001213-1987

ASTM D3776D3776M-09a(2013)

BS EN 12127 1998

ISO 3801 1977

- Fabric width ASTM D3774-16

- Fabric width and length (for length shorter BS EN 1773 1997

than 2m) ISO 22198 2006

- Threads per unit length woven AS 200125-1991

ASTM D3775-12

ISO 7211-2 1984

- Twist of yarn ASTM D1423-16

BS EN ISO 2061 2015

ISO 2061 2015

- Yarn linear density

a) woven and weft knit fabric ASTM D1059-01

BS ISO 7211-5 2002

ISO 7211-5 1984

b) yarn in skein form BS EN ISO 2060 1995

ISO 2060 1994

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 5 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis -

General Textiles and Garments - Fibre content BS EN ISO 1833-1 2010

(quantitative method - mechanical ISO 1833-1 2006 + Cor1 2009

separation and chemical analysis) (Note The above Part 1 standard should be used in

conjunction with other parts of BS EN ISO 1833

or ISO 1833 for particular fibre mixtures)

BS EN ISO 1833-2 2010

ISO 1833-2 2006

BS EN ISO 1833-3 2010

ISO 1833-3 2006

BS EN ISO 1833-4 2010

ISO 1833-4 2006

BS EN ISO 1833-5 2010

ISO 1833-5 2006

BS EN ISO 1833-6 2010

ISO 1833-6 2007

BS EN ISO 1833-7 2010

ISO 1833-7 2006

BS EN ISO 1833-8 2010

ISO 1833-8 2006

BS EN ISO 1833-9 2010

ISO 1833-9 2006

BS EN ISO 1833-10 2010

ISO 1833-10 2006

BS EN ISO 1833-11 2010

ISO 1833-11 2006

BS EN ISO 1833-12 2010

ISO 1833-12 2006

BS EN ISO 1833-13 2010

ISO 1833-13 2006

BS EN ISO 1833-14 2010

ISO 1833-14 2006

BS EN ISO 1833-16 2010

ISO 1833-16 2006

BS EN ISO 1833-17 2010

ISO 1833-17 2006

BS EN ISO 1833-18 2010

ISO 1833-18 2006

BS EN ISO 1833-21 2010

ISO 1833-21 2009

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 6 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis - (contrsquod)

General Textiles and Garments - Fibre content AATCC Test Method 20-2013

(qualitative method) lt Excluding the following gt

Tests for RI MP and SG

- Fibre content AATCC Test Method 20A-2014

(quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and

separation and chemical analysis) Cl 15 to 18

BS 4407 1988

lt Excluding the following gt

Section four - Methods 13 17 and 18

EU Regulation 10072011 amp 2862012

lt Excluding the following gt

Chapter 4 Method 15 of Annex VIII Annex X

- Fibre diameter ISO 137 2015

(animal fibres yarn and fabric only) ASTM D2130-13

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 7 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

General Textiles and Garments - Vertical test BS 5438 1976

lt Excluding the following gt

Section 3 ndash Tests 1 and 3

BS EN 1103 2005

EN 1103 2005

lt Excluding the following gt

Cl 4 (Dry-cleaning pretreatment)

Specific products

- Bed covers and pillows - Ignitability by smouldering and flaming BS 7175 1989 (1994)

ignition source BS EN ISO 12952-1 1999

EN ISO 12952-1 1998

ISO 12952-1 1998

BS EN ISO 12952-2 1999

EN ISO 12952-2 1998

ISO 12952-2 1998

- Childrenrsquos Sleepwear - Vertical test US 16 CFR Part 1615

US 16 CFR Part 1616

BS EN 14878 2007

- Curtains amp drapes - Vertical test BS 5867-2 1980 with Amendment No 1

lt Excluding the following gt

Cl 51 amp 53 Types A and C performance

requirements

BS 5867-2 2008

lt Excluding the following gt

Cl 5 Durability to dry cleaning process

Cl 64 Type C performance

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 8 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests (contrsquod)

Specific products (contrsquod)

- Materials used in upholstered furniture California Technical Bulletin 117 ndash 2013

State of California Department of

Consumer Affairs Bureau of Electronic amp

Appliance Repair Home Furnishings and

Thermal Insulation

- Resilient filling material test Section 3

- Decking material test Section 4

- Materials used in upholstered furniture - Cigarette test ASTM E1353-08ae1

lt Excluding the following gt

Section 16 17 18 and 19

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 4: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 3 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Colour fastness tests - (contrsquod)

General Textiles and Garments - Sea water AATCC Test Method 106-2013

AS 20014E02-2001

BS EN ISO 105 E02 2013

- Sublimation in storage JIS L0854-2001

- Washing (full temperature range) AATCC Test Method 61-2013

AS 2001415-2006

BS EN ISO 105 C06 2010

ISO 105 C06 2010

BS EN ISO 105 C10 2007

JIS L0844-2005

- Water AATCC Test Method 107-2013

AS 20014E01-2001

BS EN ISO 105 E01 2013

ISO 105 E01 2013

JIS L0846-2004 Method A

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 4 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Construction tests -

General Textiles and Garments - Fabric weight AS 2001213-1987

ASTM D3776D3776M-09a(2013)

BS EN 12127 1998

ISO 3801 1977

- Fabric width ASTM D3774-16

- Fabric width and length (for length shorter BS EN 1773 1997

than 2m) ISO 22198 2006

- Threads per unit length woven AS 200125-1991

ASTM D3775-12

ISO 7211-2 1984

- Twist of yarn ASTM D1423-16

BS EN ISO 2061 2015

ISO 2061 2015

- Yarn linear density

a) woven and weft knit fabric ASTM D1059-01

BS ISO 7211-5 2002

ISO 7211-5 1984

b) yarn in skein form BS EN ISO 2060 1995

ISO 2060 1994

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 5 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis -

General Textiles and Garments - Fibre content BS EN ISO 1833-1 2010

(quantitative method - mechanical ISO 1833-1 2006 + Cor1 2009

separation and chemical analysis) (Note The above Part 1 standard should be used in

conjunction with other parts of BS EN ISO 1833

or ISO 1833 for particular fibre mixtures)

BS EN ISO 1833-2 2010

ISO 1833-2 2006

BS EN ISO 1833-3 2010

ISO 1833-3 2006

BS EN ISO 1833-4 2010

ISO 1833-4 2006

BS EN ISO 1833-5 2010

ISO 1833-5 2006

BS EN ISO 1833-6 2010

ISO 1833-6 2007

BS EN ISO 1833-7 2010

ISO 1833-7 2006

BS EN ISO 1833-8 2010

ISO 1833-8 2006

BS EN ISO 1833-9 2010

ISO 1833-9 2006

BS EN ISO 1833-10 2010

ISO 1833-10 2006

BS EN ISO 1833-11 2010

ISO 1833-11 2006

BS EN ISO 1833-12 2010

ISO 1833-12 2006

BS EN ISO 1833-13 2010

ISO 1833-13 2006

BS EN ISO 1833-14 2010

ISO 1833-14 2006

BS EN ISO 1833-16 2010

ISO 1833-16 2006

BS EN ISO 1833-17 2010

ISO 1833-17 2006

BS EN ISO 1833-18 2010

ISO 1833-18 2006

BS EN ISO 1833-21 2010

ISO 1833-21 2009

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 6 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis - (contrsquod)

General Textiles and Garments - Fibre content AATCC Test Method 20-2013

(qualitative method) lt Excluding the following gt

Tests for RI MP and SG

- Fibre content AATCC Test Method 20A-2014

(quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and

separation and chemical analysis) Cl 15 to 18

BS 4407 1988

lt Excluding the following gt

Section four - Methods 13 17 and 18

EU Regulation 10072011 amp 2862012

lt Excluding the following gt

Chapter 4 Method 15 of Annex VIII Annex X

- Fibre diameter ISO 137 2015

(animal fibres yarn and fabric only) ASTM D2130-13

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 7 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

General Textiles and Garments - Vertical test BS 5438 1976

lt Excluding the following gt

Section 3 ndash Tests 1 and 3

BS EN 1103 2005

EN 1103 2005

lt Excluding the following gt

Cl 4 (Dry-cleaning pretreatment)

Specific products

- Bed covers and pillows - Ignitability by smouldering and flaming BS 7175 1989 (1994)

ignition source BS EN ISO 12952-1 1999

EN ISO 12952-1 1998

ISO 12952-1 1998

BS EN ISO 12952-2 1999

EN ISO 12952-2 1998

ISO 12952-2 1998

- Childrenrsquos Sleepwear - Vertical test US 16 CFR Part 1615

US 16 CFR Part 1616

BS EN 14878 2007

- Curtains amp drapes - Vertical test BS 5867-2 1980 with Amendment No 1

lt Excluding the following gt

Cl 51 amp 53 Types A and C performance

requirements

BS 5867-2 2008

lt Excluding the following gt

Cl 5 Durability to dry cleaning process

Cl 64 Type C performance

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 8 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests (contrsquod)

Specific products (contrsquod)

- Materials used in upholstered furniture California Technical Bulletin 117 ndash 2013

State of California Department of

Consumer Affairs Bureau of Electronic amp

Appliance Repair Home Furnishings and

Thermal Insulation

- Resilient filling material test Section 3

- Decking material test Section 4

- Materials used in upholstered furniture - Cigarette test ASTM E1353-08ae1

lt Excluding the following gt

Section 16 17 18 and 19

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 5: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 4 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Construction tests -

General Textiles and Garments - Fabric weight AS 2001213-1987

ASTM D3776D3776M-09a(2013)

BS EN 12127 1998

ISO 3801 1977

- Fabric width ASTM D3774-16

- Fabric width and length (for length shorter BS EN 1773 1997

than 2m) ISO 22198 2006

- Threads per unit length woven AS 200125-1991

ASTM D3775-12

ISO 7211-2 1984

- Twist of yarn ASTM D1423-16

BS EN ISO 2061 2015

ISO 2061 2015

- Yarn linear density

a) woven and weft knit fabric ASTM D1059-01

BS ISO 7211-5 2002

ISO 7211-5 1984

b) yarn in skein form BS EN ISO 2060 1995

ISO 2060 1994

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 5 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis -

General Textiles and Garments - Fibre content BS EN ISO 1833-1 2010

(quantitative method - mechanical ISO 1833-1 2006 + Cor1 2009

separation and chemical analysis) (Note The above Part 1 standard should be used in

conjunction with other parts of BS EN ISO 1833

or ISO 1833 for particular fibre mixtures)

BS EN ISO 1833-2 2010

ISO 1833-2 2006

BS EN ISO 1833-3 2010

ISO 1833-3 2006

BS EN ISO 1833-4 2010

ISO 1833-4 2006

BS EN ISO 1833-5 2010

ISO 1833-5 2006

BS EN ISO 1833-6 2010

ISO 1833-6 2007

BS EN ISO 1833-7 2010

ISO 1833-7 2006

BS EN ISO 1833-8 2010

ISO 1833-8 2006

BS EN ISO 1833-9 2010

ISO 1833-9 2006

BS EN ISO 1833-10 2010

ISO 1833-10 2006

BS EN ISO 1833-11 2010

ISO 1833-11 2006

BS EN ISO 1833-12 2010

ISO 1833-12 2006

BS EN ISO 1833-13 2010

ISO 1833-13 2006

BS EN ISO 1833-14 2010

ISO 1833-14 2006

BS EN ISO 1833-16 2010

ISO 1833-16 2006

BS EN ISO 1833-17 2010

ISO 1833-17 2006

BS EN ISO 1833-18 2010

ISO 1833-18 2006

BS EN ISO 1833-21 2010

ISO 1833-21 2009

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 6 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis - (contrsquod)

General Textiles and Garments - Fibre content AATCC Test Method 20-2013

(qualitative method) lt Excluding the following gt

Tests for RI MP and SG

- Fibre content AATCC Test Method 20A-2014

(quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and

separation and chemical analysis) Cl 15 to 18

BS 4407 1988

lt Excluding the following gt

Section four - Methods 13 17 and 18

EU Regulation 10072011 amp 2862012

lt Excluding the following gt

Chapter 4 Method 15 of Annex VIII Annex X

- Fibre diameter ISO 137 2015

(animal fibres yarn and fabric only) ASTM D2130-13

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 7 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

General Textiles and Garments - Vertical test BS 5438 1976

lt Excluding the following gt

Section 3 ndash Tests 1 and 3

BS EN 1103 2005

EN 1103 2005

lt Excluding the following gt

Cl 4 (Dry-cleaning pretreatment)

Specific products

- Bed covers and pillows - Ignitability by smouldering and flaming BS 7175 1989 (1994)

ignition source BS EN ISO 12952-1 1999

EN ISO 12952-1 1998

ISO 12952-1 1998

BS EN ISO 12952-2 1999

EN ISO 12952-2 1998

ISO 12952-2 1998

- Childrenrsquos Sleepwear - Vertical test US 16 CFR Part 1615

US 16 CFR Part 1616

BS EN 14878 2007

- Curtains amp drapes - Vertical test BS 5867-2 1980 with Amendment No 1

lt Excluding the following gt

Cl 51 amp 53 Types A and C performance

requirements

BS 5867-2 2008

lt Excluding the following gt

Cl 5 Durability to dry cleaning process

Cl 64 Type C performance

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 8 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests (contrsquod)

Specific products (contrsquod)

- Materials used in upholstered furniture California Technical Bulletin 117 ndash 2013

State of California Department of

Consumer Affairs Bureau of Electronic amp

Appliance Repair Home Furnishings and

Thermal Insulation

- Resilient filling material test Section 3

- Decking material test Section 4

- Materials used in upholstered furniture - Cigarette test ASTM E1353-08ae1

lt Excluding the following gt

Section 16 17 18 and 19

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 6: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 5 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis -

General Textiles and Garments - Fibre content BS EN ISO 1833-1 2010

(quantitative method - mechanical ISO 1833-1 2006 + Cor1 2009

separation and chemical analysis) (Note The above Part 1 standard should be used in

conjunction with other parts of BS EN ISO 1833

or ISO 1833 for particular fibre mixtures)

BS EN ISO 1833-2 2010

ISO 1833-2 2006

BS EN ISO 1833-3 2010

ISO 1833-3 2006

BS EN ISO 1833-4 2010

ISO 1833-4 2006

BS EN ISO 1833-5 2010

ISO 1833-5 2006

BS EN ISO 1833-6 2010

ISO 1833-6 2007

BS EN ISO 1833-7 2010

ISO 1833-7 2006

BS EN ISO 1833-8 2010

ISO 1833-8 2006

BS EN ISO 1833-9 2010

ISO 1833-9 2006

BS EN ISO 1833-10 2010

ISO 1833-10 2006

BS EN ISO 1833-11 2010

ISO 1833-11 2006

BS EN ISO 1833-12 2010

ISO 1833-12 2006

BS EN ISO 1833-13 2010

ISO 1833-13 2006

BS EN ISO 1833-14 2010

ISO 1833-14 2006

BS EN ISO 1833-16 2010

ISO 1833-16 2006

BS EN ISO 1833-17 2010

ISO 1833-17 2006

BS EN ISO 1833-18 2010

ISO 1833-18 2006

BS EN ISO 1833-21 2010

ISO 1833-21 2009

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 6 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis - (contrsquod)

General Textiles and Garments - Fibre content AATCC Test Method 20-2013

(qualitative method) lt Excluding the following gt

Tests for RI MP and SG

- Fibre content AATCC Test Method 20A-2014

(quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and

separation and chemical analysis) Cl 15 to 18

BS 4407 1988

lt Excluding the following gt

Section four - Methods 13 17 and 18

EU Regulation 10072011 amp 2862012

lt Excluding the following gt

Chapter 4 Method 15 of Annex VIII Annex X

- Fibre diameter ISO 137 2015

(animal fibres yarn and fabric only) ASTM D2130-13

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 7 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

General Textiles and Garments - Vertical test BS 5438 1976

lt Excluding the following gt

Section 3 ndash Tests 1 and 3

BS EN 1103 2005

EN 1103 2005

lt Excluding the following gt

Cl 4 (Dry-cleaning pretreatment)

Specific products

- Bed covers and pillows - Ignitability by smouldering and flaming BS 7175 1989 (1994)

ignition source BS EN ISO 12952-1 1999

EN ISO 12952-1 1998

ISO 12952-1 1998

BS EN ISO 12952-2 1999

EN ISO 12952-2 1998

ISO 12952-2 1998

- Childrenrsquos Sleepwear - Vertical test US 16 CFR Part 1615

US 16 CFR Part 1616

BS EN 14878 2007

- Curtains amp drapes - Vertical test BS 5867-2 1980 with Amendment No 1

lt Excluding the following gt

Cl 51 amp 53 Types A and C performance

requirements

BS 5867-2 2008

lt Excluding the following gt

Cl 5 Durability to dry cleaning process

Cl 64 Type C performance

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 8 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests (contrsquod)

Specific products (contrsquod)

- Materials used in upholstered furniture California Technical Bulletin 117 ndash 2013

State of California Department of

Consumer Affairs Bureau of Electronic amp

Appliance Repair Home Furnishings and

Thermal Insulation

- Resilient filling material test Section 3

- Decking material test Section 4

- Materials used in upholstered furniture - Cigarette test ASTM E1353-08ae1

lt Excluding the following gt

Section 16 17 18 and 19

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 7: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 6 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Fibre analysis - (contrsquod)

General Textiles and Garments - Fibre content AATCC Test Method 20-2013

(qualitative method) lt Excluding the following gt

Tests for RI MP and SG

- Fibre content AATCC Test Method 20A-2014

(quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and

separation and chemical analysis) Cl 15 to 18

BS 4407 1988

lt Excluding the following gt

Section four - Methods 13 17 and 18

EU Regulation 10072011 amp 2862012

lt Excluding the following gt

Chapter 4 Method 15 of Annex VIII Annex X

- Fibre diameter ISO 137 2015

(animal fibres yarn and fabric only) ASTM D2130-13

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 7 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

General Textiles and Garments - Vertical test BS 5438 1976

lt Excluding the following gt

Section 3 ndash Tests 1 and 3

BS EN 1103 2005

EN 1103 2005

lt Excluding the following gt

Cl 4 (Dry-cleaning pretreatment)

Specific products

- Bed covers and pillows - Ignitability by smouldering and flaming BS 7175 1989 (1994)

ignition source BS EN ISO 12952-1 1999

EN ISO 12952-1 1998

ISO 12952-1 1998

BS EN ISO 12952-2 1999

EN ISO 12952-2 1998

ISO 12952-2 1998

- Childrenrsquos Sleepwear - Vertical test US 16 CFR Part 1615

US 16 CFR Part 1616

BS EN 14878 2007

- Curtains amp drapes - Vertical test BS 5867-2 1980 with Amendment No 1

lt Excluding the following gt

Cl 51 amp 53 Types A and C performance

requirements

BS 5867-2 2008

lt Excluding the following gt

Cl 5 Durability to dry cleaning process

Cl 64 Type C performance

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 8 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests (contrsquod)

Specific products (contrsquod)

- Materials used in upholstered furniture California Technical Bulletin 117 ndash 2013

State of California Department of

Consumer Affairs Bureau of Electronic amp

Appliance Repair Home Furnishings and

Thermal Insulation

- Resilient filling material test Section 3

- Decking material test Section 4

- Materials used in upholstered furniture - Cigarette test ASTM E1353-08ae1

lt Excluding the following gt

Section 16 17 18 and 19

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 8: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 7 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

General Textiles and Garments - Vertical test BS 5438 1976

lt Excluding the following gt

Section 3 ndash Tests 1 and 3

BS EN 1103 2005

EN 1103 2005

lt Excluding the following gt

Cl 4 (Dry-cleaning pretreatment)

Specific products

- Bed covers and pillows - Ignitability by smouldering and flaming BS 7175 1989 (1994)

ignition source BS EN ISO 12952-1 1999

EN ISO 12952-1 1998

ISO 12952-1 1998

BS EN ISO 12952-2 1999

EN ISO 12952-2 1998

ISO 12952-2 1998

- Childrenrsquos Sleepwear - Vertical test US 16 CFR Part 1615

US 16 CFR Part 1616

BS EN 14878 2007

- Curtains amp drapes - Vertical test BS 5867-2 1980 with Amendment No 1

lt Excluding the following gt

Cl 51 amp 53 Types A and C performance

requirements

BS 5867-2 2008

lt Excluding the following gt

Cl 5 Durability to dry cleaning process

Cl 64 Type C performance

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 8 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests (contrsquod)

Specific products (contrsquod)

- Materials used in upholstered furniture California Technical Bulletin 117 ndash 2013

State of California Department of

Consumer Affairs Bureau of Electronic amp

Appliance Repair Home Furnishings and

Thermal Insulation

- Resilient filling material test Section 3

- Decking material test Section 4

- Materials used in upholstered furniture - Cigarette test ASTM E1353-08ae1

lt Excluding the following gt

Section 16 17 18 and 19

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 9: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 8 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests (contrsquod)

Specific products (contrsquod)

- Materials used in upholstered furniture California Technical Bulletin 117 ndash 2013

State of California Department of

Consumer Affairs Bureau of Electronic amp

Appliance Repair Home Furnishings and

Thermal Insulation

- Resilient filling material test Section 3

- Decking material test Section 4

- Materials used in upholstered furniture - Cigarette test ASTM E1353-08ae1

lt Excluding the following gt

Section 16 17 18 and 19

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 10: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 9 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Performance tests -

General Textiles and Garments - Abrasion resistance EN ISO 12947 2016

(Martindale tester)

- Absorbency of bleached textiles AATCC Test Method 79-2014

- Pilling resistance ISO 12945-2 2000

(Modified Martindale method)

- Pilling resistance BS EN ISO 12945-1 2001

(Pilling box method)

- Pilling resistance ASTM D3512-16

(Random Tumble Pilling Tester)

- Rain test AATCC Test Method 35-2013

- Water repellency (spray rating) BS EN 24920 1992

AATCC Test Method 22-2014

ISO 4920 2012

JIS L1092 ndash 2009 Section 52

- Water resistance (hydrostatic pressure test) BS EN 20811 1992

- Water vapour permeability BS 7209 1990 App B

Specific products

- Glove - General requirements (sizing dexterity BS EN 420 2003 Cl 61 62 63 and 64

water vapour transmission and water EN 420 2003 Cl 61 62 63 and 64

vapour absorption) EN 420 2010 Cl 61 62 63 and 64

NF EN 420 2004 Cl 61 62 63 and 64

- Mechanical risks BS EN 388 2003

EN 388 2003

NF EN 388 2004

- Sun protective clothing - Sun protective clothing evaluation and ASNZS 4399 1996 + Amdt1 1998

classification

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 11: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-269 Effective date of termination 9 December 2019)

NL HOKLAS004-269-Annex II Page 10 of 10

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Strength tests -

General Textiles and Garments - Seam slippage ASTM D434 - 95

BS EN ISO 13936-1 2004

- Seam strength ASTM D1683-2010

- Tensile strength AS 200123-2001

ISO 13934-1 2013

ISO 13934-2 2014

- Tearing strength (Elmendorf) AS 200128-2001

ASTM D1424-09(2013)

ISO 13937-1 2000

- Tearing strength BS 3424 Part 5 1982 Method 7B

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 12: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated

(Notification Letter No HOKLAS004-267 Effective date of termination 21 October 2019)

NL HOKLAS004-267-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Physical Examination-

- Colour APHA 21e 2120B

- Hardness APHA 21e 2340 C

- pH APHA 21e 4500-H+ B

- Total Suspended Solids dried at 103-105degC APHA 21e 2540 D

- Total Solids dried at 103-105degC APHA 21e 2540 B

- Total Volatile Solids ignited at 550degC APHA 21e 2540 E

- Turbidity APHA 21e 2130 B

- Conductivity APHA 21e 2510 B

Water and Wastewater Non-metallic constituents-

- Chloride APHA 21e 4500-Cl- B

- Chlorine (Free Residual) APHA 21e 4500-Cl G

- Chlorine (Total Residual) APHA 21e 4500-Cl B

APHA 21e 4500-Cl G

- Phosphorus (Dissolved amp Reactive) APHA 21e 4500-P E

- Nitrogen (Ammonia) APHA 21e 4500-NH3 H (FIA)

- Nitrogen (Nitrate) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Total Kjeldahl) APHA 21e 4500-Norg D (FIA)

- Total oxidised nitrogen APHA 21e 4500-NO3 I (FIA)

- Total Sulphide APHA 21e 4500S2-D

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 13: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

NL HOKLAS004-267-Annex III Page 2 of 2

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Environmental Testing 環境測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Water and Wastewater Non-metallic constituents-

- Dissolved Sulphide (Soluble Sulphide) APHA 21e 4500S2-B D

- Nitrogen (Total) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl + Nitrate + Nitrite) APHA 21e 4500-NO3 I (FIA)

- Nitrogen (Organic) APHA 21e 4500-Norg D (FIA) and

(Total Kjeldahl ndash Ammonia) APHA 21e 4500-NH3H (FIA)

- Nitrogen (Nitrate + Nitrite +Ammonia) APHA 21e 4500-NH3H (FIA) and

APHA 21e 4500- NO3 I (FIA)

- Sulphate APHA 21e 4500-SO42- E

Water and Wastewater Organic Pollutants-

- Oil amp Grease APHA 21e 5520 B

- Chemical Oxygen Demand APHA 21e 5220 B (Open reflux)

APHA 21e 5220 D (Closed reflux)

- Biochemical Oxygen Demand (5-day) APHA 21e 5210 B

Trace Metals (recoverable)-

- Copper Cadmium Lead Iron Manganese APHA 21e 3030F 3b amp 3111B

Nickel amp Zinc

- Aluminium APHA 21e 3030F 3b amp 3111D

Physical examination

Sewage sludge - Total Solids dried at 103degC-105degC APHA 21e 2540 G

- Total Volatile Solids ignited at 550degC APHA 21e 2540 G

Saline water - Total Suspended Solids dried at 103-105degC APHA 21ed 2540D

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 14: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-265 Effective date of termination 21 July 2019)

Notification Letter No HOKLAS004-265 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Safety tests -

Electrical accessories

- 13 A fused plugs - Compliance inspection and safety tests BS 1363-1 1995 + A4 2012

- 13 A switched and unswitched socket outlets - Compliance inspection and safety tests BS 1363-2 1995 + A4 2012

- 13 A switched and unswitched fused - Compliance inspection and safety tests BS 1363-4 1995 + A4 2012

connection units

- Adaptors - Compliance inspection and safety tests BS 1363-3 1995 + A4 2012

SS 246 1996

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 15: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Notification Letter No HOKLAS004-265 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Physical and Mechanical Testing 物理及機械測試

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Glass and glass products Performance tests -

- Glass containers with base dimension not - Optical retardation ASTM C148-14

exceeding 137mm and height up to 550mm

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 16: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Notification Letter No HOKLAS004-265 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Physical and mechanical tests -

Toys - Safety requirements and test methods ISO 81241 2014

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 17: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-264 Effective date of termination 21 June 2019)

Notification Letter No HOKLAS004-264 Annex III Page 1 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Miscellaneous 雜類

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Cosmetics Tests for microbial contamination The SCCSrsquos Notes of Guidance for the Testing of

Cosmetics Ingredients and Their Safety

Evaluation (8th Revision December 2012) -

Guidelines on Microbiological Quality of the

Finished Cosmetic Product 4-42

Test Procedures for compliance testing

- Total Viable Aerobic Count - The United States Pharmacopeia 38 (2015)

General Ch lt61gt

- British Pharmacopoeia (2016) App XVI B-2

- European Pharmacopoeia 8th edition (2014)

Ch 2612

- Tests for Specified Microorganisms - The United States Pharmacopeia 38 (2015)

General Chapter lt62gt

- British Pharmacopoeia (2016) App XVI B-1

- European Pharmacopoeia 8th edition (2014)

Ch 2613

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 18: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Notification Letter No HOKLAS004-264 Annex III Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Microbiological examinations-

Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 9th edition (2016)

substances for pharmaceutical use Ch 514

- Test for specified microorganisms Test Procedures for compliance testing

Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 9th edition (2016)

Clostridia Ch 2613

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - European Pharmacopoeia 9th edition (2016)

Ch 2612

Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2017) App XVI D

substances for pharmaceutical use Test Procedures for compliance testing

- Test for specified microorganisms - British Pharmacopoeia (2017) App XVI B-1

Bile-tolerant Gram-negative Bacteria

Clostridia

Escherichia coli

Pseudomonas aeruginosa

Salmonella spp

Staphylococcus aureus

Candida albicans

- Microbial enumeration tests - British Pharmacopoeia (2017) App XVI B-2

Purified water Total aerobic microbial count British Pharmacopoeia (2017) Volume II Purified

Water

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 19: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Notification Letter No HOKLAS004-264 Annex III Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Aqueous water Microbiological tests-

- Heterotrophic plate count APHA 21e 9215 B

(Pour Plate Method)

Toy cosmetics liquids pastes putties gels Cleanliness of Materials ASTM F963-16 Clause 4363 and 841

and powders Test Procedures for compliance testing

lt Excluding the following gt - Microbial Enumeration Tests The United States Pharmacopeia 39 (2016)

- avian feather products General Ch lt61gt

Test Procedures for compliance testing

- Tests for Specified Microorganisms The United States Pharmacopeia 39 (2016)

General Ch lt62gt

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 20: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Electrical tests -

Battery operated toys - Battery operated toys safety tests ASNZS ISO 81241 2002

Annex A

ASTM F963-11

Section 425

ASTM F963-16

Section 425

Electric toys - Safety tests IEC 62115 2003 + A12004 +A2 2010

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 21: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys Flammability tests - ISO 8124-2 2007

ASTM F963-11

Section 42

ASTM F963-16

Section 42

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 22: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys ISO 8124-1 2009 + Amdt 1 2011 + Amdt 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

ISO 8124-1 2012

- General requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 423

424 425 426 427 428 and 430

- Test methods Cl 5

- Safety-labelling guidelines and Annex B

manufacturerrsquos marking

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 23: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-260 Effective date of termination 15 March 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 4

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys ASTM F963-11

- Safety Requirements Section 41 45 to 414 416 to 424 426 to 428

430 to 436 438 and 439

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys) 462

4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

ASTM F963-16

- Safety Requirements Section 41437 45 to 414 416 to 424

426 to 428 430 to 436 438 to 440

ltExcluding the followinggt

Section 41 (examination of reprocessed materials

to 431) 45 (tests for pull and push toys and

hand-activated spring-propelled toys)

462 and 4201

- Safety labeling requirements Section 5

- Instructional literature Section 6

- Producerrsquos markings Section 7

- Test Methods Section 8

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 24: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Toys

玩具類產品

- Electric toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-069 2010 GB 19865-2005

- toys containing gas or liquid

- 電玩具類產品 CNCA-13C-069 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測 GB 19865-2005

- 含氣體或液體玩具

- Plastic toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-070 2010

- toys containing gas or liquid

- 塑膠玩具類產品 CNCA-13C-070 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Metal toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-071 2010

- toys containing gas or liquid

- 金屬玩具類產品 CNCA-13C-071 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Projectile toys All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-072 2010

- toys containing gas or liquid

- 彈射玩具類產品 CNCA-13C-072 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

- Dolls All required tests as specified in GB 6675-2003 + A1 2005

ltExcluding the followinggt CNCA-13C-073 2010

- toys containing gas or liquid

- 娃娃玩具類產品 CNCA-13C-073 2010 GB 6675-2003 + A1 2005

lt不包括gt 有關規定的所有檢測

- 含氣體或液體玩具

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 25: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests

Toys - Migration of the elements GB 6675-2003 Annex C

玩具 Antimony Arsenic Barium Cadmium

Chromium Lead Mercury Selenium

特定元素的遷移

銻 砷 鋇 鎘 鉻 鉛 汞 硒

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 26: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Flammability tests - GB 6675-2003 + A12005

玩具 燃燒測試 Cl 42 and Annex B

lt Excluding the following gt

Tests for extremely flammable liquid

highly flammable liquid flammable gas

viscosity test

不包含 極度易燃液體高度易燃液體

易燃氣體粘度測試

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 27: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

Technical requirements 技術要求

- Normal use 正常使用 411 A41

- Reasonably foreseeable abuse 412 A42

可預見的合理濫用

- Material 材料 413 A43

- Small parts 小零件 414 A44

- Shape size and strength of certain toys 415 A45

某些特定玩具的形狀尺寸及強度

- Edges 邊緣 416 A46

- Points 尖端 417 A47

- Projections 突出物 418 A48

- Metal wires and rods 金屬絲和杆件 419 A49

- Plastic film or plastic bags in packaging and 4110 A410

in toys

用於包裝或玩具中的塑膠袋或塑膠

薄膜

- Cords and elastics 繩索和彈性繩 4111 A411

- Folding mechanisms 折疊機構 4112 A412

lt Excluding the following 不包含gt

4125c) A4122

- Holes clearances and accessibility of 4113 A413

mechanisms

孔間隙機械裝置的可觸及性

- Springs 彈簧 4114 A414

- Enclosures 封閉式玩具 4116 A416

lt Excluding the following 不包含gt

A41622

- Simulated protective equipment such as 4117 A417

helmets hats and goggles

仿製防護玩具(頭盔帽子護目鏡)

- Projectile toys 彈射玩具 4118 A418

- Aquatic toys 水上玩具 4119 A419

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 28: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-258 Effective date of termination 24 January 2019)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 5

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302室

Toys and Childrenrsquos Products玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests - (contrsquod)

Toys (contrsquod) GB 6675-2003 + A12005

- Toys containing a heat source 熱源玩具 4123 A423

- Liquid-filled toys 液體填充玩具 4124 A424

- Mouth-actuated toys 口動玩具 4125 A425

lt Excluding the following 不包含gt

A425c)

- Toy roller skates and toys skateboards 4126 A426

玩具旱冰鞋及玩具滑板

- Percussion caps 玩具火藥帽 4127 A427

Test methods 測試方法 A5

- Safety-labelling guidelines and 附錄 AC (資料性附錄)

manufacturerrsquos markings

安全標識指南和生產廠商標記

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 29: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III Notification Letter No HOKLAS004-257 Page 1 of 3

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-257 Effective date of termination 26 October 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Chemical tests -

Japan Toy Safety Standard ST2012 (2012927)

English version Part 3

All toysrsquo materials - Colouring matters Cl 11

Materials which are mainly composed of - Consumption of potassium permanganate Cl 12

polyethylene polyvinyl chloride - Residue on evaporation

(excluding parts on which paint coating is - Heavy metals

applied) - Arsenic

- Cadmium (excluding materials mainly composed

of polyethylene)

Decalcomania folded paper and rubber-made toys - Heavy metals Cl 13

(excluding rubber pacifiers) - Arsenic

Vinyl chloride resin coating - Consumption of potassium permanganate Cl 14

- Residue on evaporation

The paint coating applied to the body or the - Heavy metals 8 elements (antimony arsenic Cl 15

components of the toys (excluding the barium cadmium chromium lead mercury

printing ink used for paper containers) and selenium)

(including vinyl chloride resin coating)

Textile products used for toys - Free formaldehyde Cl 16

lt Excluding the following gt

Confirmation test by HPLC

Ink and the like used for the graphic - Colouring matters Cl 18

instruments that are provided with the toys such - Heavy metals 8 elements (antimony arsenic

as pencils ball-point pens markers crayons barium cadmium chromium lead mercury

pastels water colours chalks etc and selenium)

Synthetic resin mainly composed of polyvinyl - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19

chloride polyurethane and rubber for which - Dibutyl phthalate (DBP) lt Excluding the following gt

phthalate compound is used as raw material - Butyl benzyl phthalate (BBP) Cl 193

(including those used for paint coating) - Di-isononyl phthalate (DINP)

- Di-isodecyl phthalate (DIDP)

- Di-n-octyl phthalate (DNOP)

Metals used for toy (neither painted nor covered) - Lead Cl 111

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 30: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III Notification Letter No HOKLAS004-257 Page 2 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Flammability tests -

Toys Japan Toy Safety Standard ST 2012 Part 2

lt Excluding the following gt

Tests for flammable gel extremely flammable

liquid highly flammable liquid flammable gas

viscosity test

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 31: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III Notification Letter No HOKLAS004-257 Page 3 of 3

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests has been terminated

Physical and mechanical tests -

Toys Japan Toy Safety Standard ST 2012 (20129) Part 1

(based on English version provided by JTA in

September 2012)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (2013104)

Part 1 (based on English version provided by JTA

in September 2012 and October 2013)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Japan Toy Safety Standard ST 2012 (20141127)

Part 1 (based on English version provided by JTA

in December 2014)

- Safety Requirements Cl 41 42 43 44 45 46 47 48 49 410

411 412 413 414 416 417 418 419 420

421 422 423 424 425 426 and 427

ltExcluding the followinggt

Cl 4122 41622 422c)

423 (pull and push toys hand-activated

spring-propelled toys

- Test Methods Cl 5

ltExcluding the followinggt

Cl 5223

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 32: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II Notification Letter No HOKLAS004-256 Page 1 of 1

Annex II

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-256 Effective date of termination 1 December 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

Chinese Medicine 中藥

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chinese Materia Medica Chemical and physicochemical tests-

中藥材

- Determination of total ash灰分 Hong Kong Chinese Materia Medica Standards

Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determination of acid-insoluble ash Hong Kong Chinese Materia Medica Standards

酸不容性灰分 Volume 1-7 App IX

香港中藥材標準第一至七冊附錄 IX

- Determinaiton of Extractives浸出物 Hong Kong Chinese Materia Medica Standards

Cold extraction method 冷浸法 Volume 1-7 App XI

Hot extraction method 熱浸法 香港中藥材標準第一至七冊附錄 XI

Chinese Materia Medica Chemical tests and microscopic examination-

中藥材

Rhizoma Gastrodiae - High-performance liquid chromatographic Hong Kong Chinese Materia Medica Standards

天麻 fingerprinting Volume 3

高效液相色譜指紋圖譜鑒別 香港中藥材標準第三冊

- Assay

含量測定

- Thin-layer chromatographic identification

薄層色譜鑒別

- Microscopic identification

顯微鑒別

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 33: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of test for which accreditation has been terminated

(Notification Letter No HOKLAS004-255 Effective date of termination 23 November 2018)

Annex II Notification Letter No HOKLAS004-255 Page 1 of 1

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following test has been terminated

Chemical tests -

Toys made of phenolic moulding materials - Phenol DIN 53704 - 1988

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 34: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 1 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Testing Required by the China Compulsory Certification System (CCC)中國強制性產品認證制度規定的檢測

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Electrical and electronic products

- Household and similar use appliances Safety tests are specified in GB47061-2005

- Blender CNCA-C07-01 2014 GB470630-2008

ltExcluding the followinggt

- Appliance with IPX1 to IPX7

- Appliances incorporating a protective electronic

circuit

- Appliances having electronic switches or

stand-by mode switches

- Appliance with parts of natural or synthetic

rubber as supplementary insulation

電氣電子產品

- 家用和類似用途設備 CNCA-C07-01 2014 有關規定的 GB 47061-2005

- 攪拌器 安全檢測項目 GB 470630-2008

lt不包括gt

- 外殼防護等級 IPX1 至 IPX7

的攪拌器

- 裝有保護電子電路的攪拌器

- 使用電子開關或待機開關的攪拌器

- 含有天然或合成橡膠作為附加絶緣的

攪拌器

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 35: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 2 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests -

Emission tests

Electrical and electronic equipment having an - Harmonic currents EN 61000-3-2 2006 + A1 2009 + A2 2009

input current up to 16A per phase and connected IEC 61000-3-2 2005 + A1 2008 + A2 2009

to 220V 230V or 240V supply system operating

at 50 Hz or 60 Hz

lt Excluding the following gt

- three phase equipment

- arc welding equipment

- professional equipment

Electrical and electronic equipment having an - Measurement of voltage fluctuations and EN 61000-3-3 2008

input current up to 16A per phase and connected flicker at the supply terminals of the IEC 61000-3-3 2008

to a supply system of line to neutral voltage Equipment

between 220 V and250 V at 50 Hz - Short-term flicker indicator Pst

lt Excluding the following gt - Long-term flicker indicator Plt

- three-phase equipment - Relative voltage change d(t)

- Relative steady-state voltage change dc

- Maximum relative voltage change dmax

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 36: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 3 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

EMC tests - (contrsquod)

Immunity tests

Electrical and electronic equipment - Surge

- 4 kV 1250 μs and 820 μs EN 61000-4-5 2006

IEC 61000-4-5 2005

lt Excluding the following gt

for the above two standards

Cl 62 632 73 74 75 76 and 77

Electrical and electronic equipment - Conducted disturbance induced by radio EN 61000-4-6 2009

frequency fields IEC 61000-4-6 2008

- 150 kHz to 230 MHz 3V (max) lt Excluding the following gt

for the above two standards

Cl 621 6222 and 623

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 37: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 4 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests -

Household and similar electrical appliances

- General requirements for single phase electrical - Compliance inspection and safety tests BS EN 60335-1 2002 + A15 2011

appliances EN 60335-1 2002 + A15 2011

lt Excluding the following gt lt Excluding the following gt

- appliances for use in tropical climate for the above two standards

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

32 (EMF measurement) Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of BS EN 60335 or

EN 60335)

IEC 60335-1 2001 + A1 2004 + A2 2006

lt Excluding the following gt

Cl 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

(Note The above standards should be used in

conjunction with the product test standards as

detailed in relevant Part 2 of IEC 60335)

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 38: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 5 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Appliances for skin and hair treatment - Compliance inspection and safety tests BS EN 60335-2-23 2003 + A11 2010

EN 60335-2-23 2003 + A11 2010

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-23 2003 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 39: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 6 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Battery chargers - Compliance inspection and safety tests BS EN 60335-2-29 2004 with Amd 15663 and

lt Excluding the following gt Amd 15769

- DC distribution boards battery chargers for EN 60335-2-29 2004

installing in caravans and similar vehicles lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-29 2002 + A1 2004

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 40: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 7 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Fans with rated voltage not more than 250V - Compliance inspection and safety tests BS EN 60335-2-80 2003 with Amd 15201

lt Excluding the following gt EN 60335-2-80 2003 + A1 2004

- Ceiling fan and duct fan lt Excluding the following gt

for the above two standards

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-80 2003 + A1 2004

lt Excluding the following gt

Clauses 47 addition 62 (duct fan)

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

20101 (hardness and speed of unguarded fan

blades fan output power)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 41: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 8 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Kitchen machines - Compliance inspection and safety tests BS EN 60335-2-14 2006 +A1 2008

lt Excluding the following gt EN 60335-2-14 2006 + A1 2008

- Ice-cream machines lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

IEC 60335-2-14 2006 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex AA Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 42: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 9 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Room heaters - Compliance inspection and safety tests BS EN 60335-2-30 2003 with Amd 15537

EN 60335-2-30 2003 + A1 2004 + A2 2007

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-30 2002 + A1 2004 + A2 2007

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

21 (Impact tests at 20J)

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 43: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 10 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Shavers hair clippers and similar appliances - Compliance inspection and safety tests BS EN 60335-2-8 2003 + A2 2008

EN 60335-2-8 2003 + A2 2008

lt Excluding the following gt

for the above two standards

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

IEC 60335-2-8 2002 + A1 2005 + A2 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 44: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of tests for which accreditation has been terminated

(Notification Letter No HOKLAS004-253 Effective date of termination 5 September 2018)

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司

Page 11 of 11

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong

香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated

Safety tests - (contrsquod)

Household and similar electrical appliances

(contrsquod)

- Toasters grills and roasters - Compliance inspection and safety tests IEC 60335-2-9 2002 + A12004 + A2 2006

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

31 (salt mist test) Annex F Annex J

- Warming plates and similar appliances - Compliance inspection and safety tests IEC 60335-2-12 2002 + A1 2008

lt Excluding the following gt

Clauses 814 (discharge measurement)

151 (tests for IPX1 to IPX7) 19113 19114

227 2232 (oxygen bomb test) 2246

24 (component tests to other standards)

Annex F Annex J

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 45: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-248 Effective date of termination 1 May 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Food 食品 ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Accreditation of the following tests has been terminated

Chemical analysis- Fruit and vegetables Organochlorine pesticides- In-house method TG-FP-128 (By GC-ECD) - Aldrin Dieldrin cis-Chlordane trans-Chlordane Oxychlordane pp-DDT op-DDT pp-DDE pp-DDD Endrin Heptachlor Heptachlor epoxide Hexachlorobenzene (HCB) α-BHC β-BHC δ-BHC γ-BHC (Lindane) Quintozene (PCNB) Pentachloroaniline Methyl pentachlorophenylsulphide α-Endosulfan β-Endosulfan Endosulfan sulfate Endrin aldehyde Endrin ketone Methoxychlor Chlorfenapyr Dichlorbenil Trifluralin Vinclozolin Chlorothalonil Dicofol Procymidone op-DDE op-DDD Mirex Tetradifon

Annex III Notification Letter No HOKLAS004-248 Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 46: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-246 Effective date of termination 20 April 2018)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

Accreditation of the following tests is terminated Care performance tests - General Textiles and Garments - Dimensional stability to washing AATCC Test Method 135-2014 Chemical analysis - - pH value AATCC Test Method 81-2012 Colour fastness tests - - Dry cleaning BS EN ISO 105 D02 1996 ISO 105 D02 1993

- Non-chlorine bleach AATCC Test Method 172-2010

- RubbingCrocking AATCC Test Method 8-2013 BS EN ISO 105 X12 2002 ISO 105 X12 2001 Construction tests - - Fabric width ASTM D3774-96(2012) - Twist of yarn ASTM D1423-08 BS EN ISO 2061 2010 Fibre analysis - (contrsquod) - Fibre diameter ISO 137 1975 (animal fibres yarn and fabric only) Performance tests - - Abrasion resistance EN ISO 12947 1998 with Corr 1 (Martindale tester) - Pilling resistance ASTM D3512-2010 (Reapproved 2014) (Random Tumble Pilling Tester)

Annex III Notification Letter No HOKLAS004-246 Page 1 of 1

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 47: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex II

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-244 Effective date of termination 1 November 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Textiles and Garments 紡織品及成衣

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Colour fastness tests - General Textiles and Garments - Bleaching (hydrogen peroxide) AATCC Test Method 101-2009 - Bleaching (peroxide) BS EN ISO 105 N02 1995 ISO 105 N02 1993 - Bleaching (sodium chlorite (mild)) BS EN ISO 105 N03 1995 ISO 105 N03 1993 - Bleaching (sodium chlorite (severe)) BS EN ISO 105 N04 1995 ISO 105 N04 1993 - Dry heat AATCC Test Method 117-2013

BS EN ISO 105 P01 1995 ISO 105 P01 1993

Flammability tests - Specific products - Filling material of upholstered furniture California Technical Bulletin 117 - 2000 State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation - Vertical test Section A Part I - Cigarette test Section D Part II

Notification Letter No HOKLAS004-244 Annex II Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 48: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification Letter No HOKLAS004-240 Effective date of termination 3 August 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Microbiological examinations- Non-sterile pharmaceutical preparations and Microbiological quality European Pharmacopoeia 8th edition (2014) substances for pharmaceutical use Ch 514 - Test for specified microorganisms Test Procedures for compliance testing Bile-tolerant Gram-negative Bacteria - European Pharmacopoeia 8th edition (2014) Clostridia Ch 2613 Escherichia coli Pseudomonas aeruginosa Salmonella spp

Staphylococcus aureus Candida albicans - Microbial enumeration tests - European Pharmacopoeia 8th edition (2014) Ch 2612 Non-sterile pharmaceutical preparations and Microbiological quality British Pharmacopoeia (2016) App XVI D substances for pharmaceutical use Test Procedures for compliance testing - Test for specified microorganisms - British Pharmacopoeia (2016) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests - British Pharmacopoeia (2016) App XVI B-2

NL HOKLAS004-140-Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 49: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm 1302 Yan Hing Centre 9-13 Wong Chuk Yeung Street Fo Tan Shatin New Territories Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Accreditation of the following tests has been terminated Pharmaceutical Products 藥物

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 Pharmaceutical preparations and substances Microbiological examination The United States Pharmacopoeia 38 (2015)

for pharmaceutical use General Ch lt1111gt - nonsterile products - Microbial Enumeration Tests The United States Pharmacopeia 38 (2015) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopeia 38 (2015) Bile-tolerant Gram-negative Bacteria General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans Purified water Total aerobic microbial count British Pharmacopoeia (2016) Volume II Purified Water

NL HOKLAS004-140-Annex III Page 2 of 2

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 50: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

NL HOKLAS004-239 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-239 Effective date of termination 31 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Electrical and Electronic Products 電氣及電子產品

ITEM TESTED OR MEASURED

測試或量度項目

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

Safety tests -

Household and similar electrical appliances

- Appliances for heating liquid - Compliance inspection and safety tests BS EN 60335-2-15 2002 + A2 2008

EN 60335-2-15 2002 + A2 2008

IEC 60335-2-15 2002 + A1 2005 +A2 2008

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 51: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

NL HOKLAS004-237 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-237 Effective date of termination 14 July 2017)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Toys and Childrenrsquos Products 玩具及兒童產品

ITEM TESTED OR MEASURED 測試或量度項目

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated Electrical tests - Battery operated toys - Battery operated toys safety tests ASTM F963-07(e1) Cl 425 and 818 Flammability tests - Toys ASNZS ISO 8124-2 2009 EN 71-2 2011 BS EN 71-2 2011 Physical and mechanical tests - Toys ASNZS ISO 81241 2010 ASNZS ISO 81241 2013 BS EN 71-1 2011 EN 71-1 2011 BS EN 71-1 2011 + A2 2013 EN 71-1 2011 + A2 2013 BS EN 71-1 2011 + A3 2014 EN 71-1 2011 + A3 2014

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 52: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

NL HOKLAS004-230 Annex III Page 1 of 1

Annex III

List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-230 Effective Date of Termination 16 September 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST

CATEGORY

測試類別

ITEM MATERIAL

OR PRODUCT TESTED

測試項目材料或產品

SPECIFIC TEST OR

PROPERTY MEASURED

特定測試或量度的特性

SPECIFICATION STANDARD METHOD

OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ELECTRICAL and

ELECTRONIC EMC tests -

PRODUCTS

電氣及電子產品 Emission tests

Unintentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and Subpart B

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test method specified in ANSI C634-2009

- Measurement of conducted emission

- 9 kHz to 30 MHz

Intentional radiators - Measurement of radiated emission 47 CFR Part 15 Subpart A and C

subject to 47 CFR Part 15 - 9 kHz to 40 GHz using test methods specified in ANSI C634-2009

with operating frequency - Measurement of conducted emission

below 10 GHz - 9 kHz to 30 MHz

Sound broadcast receivers - Measurement of terminal disturbance ASNZS CISPR 13 2004

and associated equipment Voltages CISPR 13 2001 + A1 2003 + A2 2006

- 015 MHz to 30 MHz EN 55013 2001 + A1 2003 + A2 2006

- Measurement of disturbance power

- 30 MHz to 300 MHz

- Measurement of radiated disturbances

- 30 MHz to 1 GHz

Lighting equipment and - Measurement of conducted disturbance ASNZS CISPR 15 2006

luminaires voltages at mains terminals load terminals CISPR 15 2005 + A1 2006 + A2 2008

and control terminals EN 55015 2006 + A1 2007 + A2 2009

- 9 kHz to 30 MHz

- Measurement of radiated electromagnetic

disturbances

- 9 kHz to 300 MHz

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 53: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-224 Effective date of termination 19 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Microbiological examinations 環境測試

Water Wastewater and Legionellae count including ASNZS 3896 1998 with Amendment No1 Cooling tower water Legionella Pneumophila count

NL HOKLAS004-224 Annex III Page 1 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 54: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

FOOD 食品 Microbiological examination-

General foodstuff - Coliform count AOAC Official Methods 99114 (1995) - E Coli count AOAC Official Methods 99114 (1995) - Salmonella US FDA Bacteriological Analytical Manual (BAM) Online (June 2006) Ch 5

NL HOKLAS004-224 Annex III Page 2 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 55: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

MISCELLANEOUS 雜類 Microbiological examination- Cosmetics Tests for microbial contamination Test Procedures for compliance testing - Total Viable Aerobic Count The United States Pharmacopeia 37 Second Supplement (2014) General Ch lt61gt British Pharmacopoeia (2015) App XVI B-2 - Tests for Specified Microorganisms The United States Pharmacopeia 37 Second Supplement (2014) General Chapter lt62gt British Pharmacopoeia (2015) App XVI B-1

NL HOKLAS004-224 Annex III Page 3 of 4

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 56: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

PHARMACEUTICAL PRODUCTS Microbiological examination - 藥物 Non-sterile pharmaceutical Microbiological quality British Pharmacopoeia (2015) App XVI D preparations and substances Test Procedures for compliance testing for pharmaceutical use - Test for specified microorganisms British Pharmacopoeia (2015) App XVI B-1 Bile-tolerant Gram-negative Bacteria Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans - Microbial enumeration tests British Pharmacopoeia (2015) App XVI B-2 Pharmaceutical preparations Microbiological examination The United States Pharmacopoeia 37 Second Supplement and substances for (2014) General Ch lt1111gt pharmaceutical use - nonsterile products - Microbial Enumeration Tests The United States Pharmacopoeia 37 Second Supplement (2014) General Ch lt61gt - Tests for Specified Microorganisms The United States Pharmacopoeia 37 Second Supplement Bile-tolerant Gram-negative Bacteria (2014) General Ch lt62gt Clostridia Escherichia coli Pseudomonas aeruginosa Salmonella spp Staphylococcus aureus Candida albicans

NL HOKLAS004-224 Annex III Page 4 of 4

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 57: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III List of test for which accreditation has been terminated

(Notification letter No HOKLAS004-223 Effective Date of Termination 13 May 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Care performance tests - General textiles and - Dimensional stability to washing AATCC Test Method 135-2012 garments Colour fastness tests - General textiles and - Dry cleaning AATCC Test Method 132-2009 garments - Dry heat AATCC Test Method 117-2009 - Hot pressing AATCC Test Method 133-2009 - Light (Xenon arc lamp tester) BS EN ISO 105 B02 2013 Methods 2 and 4 ISO 105 B02 2013 Methods 2 amp 4 - Perspiration AATCC Test Method 15-2009 - RubbingCrocking AATCC Test Method 8-2007 - Sea water AATCC Test Method 106-2009 - Washing (full temperature range) AATCC Test Method 61-2010 Methods 1A 2A 3A 4A 5A - Water AATCC Test Method 107-2012 Construction tests - General textiles and - Twist of yarn ISO 2061 2010 garments Specific products - Childrenrsquos clothing - Measurement of cords and drawn strings BS EN 14682 2008 Fibre analysis - General textiles and - Fibre content AATCC Test Method 20-2011 garments (qualitative method) - Fibre content AATCC Test Method 20A-2012 (quantitative method - mechanical Cl 1 to 13 Cl 14 for AngoraWool analysis and separation and chemical analysis) Cl 15 to 18

NL HOKLAS004-223 Annex III Page 1 of 2

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 58: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術 The accreditation of the following tests has been terminated

TEXTILES and GARMENTS Performance tests - General textiles and - Absorbency of bleached textiles AATCC Test Method 79-2010 garments - Rain test AATCC Test Method 35-2006 - Sun protective clothing evaluation and ASNZS 4399 1998 classification - Water repellency (spray rating) AATCC Test Method 22-2010 Strength tests - General textiles and - Tensile strength ISO 13934-2 1999 garments

NL HOKLAS004-223 Annex III Page 2 of 2

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 59: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-220 Effective date of termination 25 January 2016)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

TEST CATEGORY 測試類別

ITEM MATERIAL OR PRODUCT TESTED 測試項目材料或產品

SPECIFIC TEST OR PROPERTY MEASURED 特定測試或量度的特性

SPECIFICATION STANDARD METHOD OR TECHNIQUE USED

規範標準方法或應用技術

The accreditation of the following tests has been terminated

ENVIRONMENTAL TESTING Trace Metals (recoverable) 環境測試

Water and Wastewater - Chromium APHA 21e 3030F3b amp 3111B

NL HOKLAS004-220 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 60: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III List of tests for which accreditation has been terminated

(Notification letter no HOKLAS004-219 Effective date of termination 31 December 2015)

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術

1 2 BThe accreditation of the following tests has been terminated

CHEMICAL TESTING Chemical tests- 化學測試 Products intended to come - Release of nickel UK The Dangerous Substances and Preparations into direct contact with skin (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 and piercing parts UK The Dangerous Substances and Preparations (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC Spectacle frames and - Release of nickel UK The Dangerous Substances and Preparations sunglasses intended to come (Nickel) (Safety) Regulations 2000 SI 2000 No 1668 into close and prolonged UK The Dangerous Substances and Preparations contact with the skin (Nickel) (Safety) Regulations 2005 SI 2005 No 2001 The European Parliament and Council Directive 9427EC and Commission Directive 200496EC

NL HOKLAS004-219 Annex III Page 1 of 1

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 61: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III List of tests for which accreditation has been terminated

(Notification letter No HOKLAS004-214 Effective date of termination 13 July 2015) CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6 BSPECIFIC TEST OR 7 BPROPERTY MEASURED 8 B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 The accreditation of the following tests has been terminated

TOYS and CHILDRENrsquoS Flammability tests - PRODUCTS (contrsquod) Toys Japan Toy Safety Standard ST2002 Tenth Edition 玩具及兒童產品 (201041) Part 2 (following the Ninth Edition and revision published by JTA in March 2010) lt Excluding the following gt Tests for flammable gel extremely flammable liquid highly flammable liquid flammable gas viscosity test Physical and mechanical tests - Toys MS ISO 8124-1 2001 - General requirements Cl 41 42 43 44 45 46 47 48 49 410 411 412 413 414 416 417 418 419 423 424 425 426 and 427 ltExcluding the followinggt Cl 4122 41622 and 425c) - Test methods Cl 5 ltExcluding the followinggt Cl 5243 - Safety-labelling guidelines and Annex C manufacturerrsquos marking Toys Japan Toy Safety Standard ST 2002 Tenth Edition (201041) Part 1 (following the Ninth Edition and revision published by JTA in March 2010) - Safety Requirements Cl 411 412 413 414 415 4211 4212 4213 4214 4215 4216 4217 4218 4219 42110 4221 4222 4224 4225 4226 4228 42210 42211 42212 42213 42214 42215 42217 and 42218 ltExcluding the followinggt Cl 422103 - Test Methods Cl 5 ltExcluding the followinggt Cl 54 55 56 57 58 510 511 522 and 523 - Packaging Cl 6 - Safety requirements of toys intended for Supplement 1 children under the age of 3 years - Safety requirements of toys which contain Supplement 2 magnets - Safety requirements of food imitation toys Supplement 3

HOKLAS004-214 Annex III Page 1 of 1

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 62: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

0BTEST 1BCATEGORY

2B測試類別

3BITEM MATERIAL 4BOR PRODUCT TESTED

5B測試項目材料或產品

6BSPECIFIC TEST OR 7BPROPERTY MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 TOYS and Chemical tests CHILDRENrsquoS Japan Toy Safety Standard ST2002 Ninth Edition PRODUCTS (200991) Part 3 (contrsquod) 玩具及兒童產品 All toysrsquo materials - Colouring matters Cl 11 (續上) Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride or acetyl - Residue on evaporation cellulose (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation - Lead - Arsenic - Cadmium The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the arsenic barium cadmium chromium toys (excluding the printing ink lead mercury and selenium) used for paper containers) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the - Colouring matters Cl 18 graphic instruments that are - Heavy metals 8 elements (antimony provided with the toys such arsenic barium cadmium chromium as pencils ball-point pens lead mercury and selenium) markers crayons pastels water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 1 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 63: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

12BTEST 13BCATEGORY

14B測試類別

15BITEM MATERIAL 16BOR PRODUCT TESTED

17B測試項目材料或產品

18BSPECIFIC TEST OR 19BPROPERTY MEASURED 20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Tenth Edition PRODUCTS (201041) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used lead mercury and selenium) for paper containers)(including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 composed of polyvinyl - Dibutyl phthalate (DBP) lt Excluding the following gt chloride for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 2 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 64: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

24BTEST 25BCATEGORY

26B測試類別

27BITEM MATERIAL 28BOR PRODUCT TESTED

29B測試項目材料或產品

30BSPECIFIC TEST OR 31BPROPERTY MEASURED 32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 TOYS and Chemical tests - (contrsquod) CHILDRENrsquoS Japan Toy Safety Standard ST2002 Eleventh Edition PRODUCTS (20110823) Part 3 (contrsquod) (following the Ninth Edition and revision published 玩具及兒童產品 by JTA in March 2010 and August 2011) (續上) All toysrsquo materials - Colouring matters Cl 11 Materials which are mainly - Consumption of potassium Cl 12 composed of polyethylene permanganate polyvinyl chloride - Residue on evaporation (excluding parts - Heavy metals on which paint coating is - Arsenic applied) - Cadmium (excluding materials mainly composed of polyethylene) Decalcomania folded paper - Heavy metals Cl 13 and rubber-made toys - Arsenic (excluding rubber pacifiers) Vinyl chloride resin coating - Consumption of potassium Cl 14 permanganate - Residue on evaporation The paint coating applied to the - Heavy metals 8 elements (antimony Cl 15 body or the components of the toys arsenic barium cadmium chromium (excluding the printing ink used for lead mercury and selenium) paper containers) (including vinyl chloride resin coating) Textile products used for toys - Free formaldehyde Cl 16 lt Excluding the following gt Confirmation test by HPLC Ink and the like used for the graphic - Colouring matters Cl 18 instruments that are provided with - Heavy metals 8 elements (antimony the toys such as pencils ball-point arsenic barium cadmium chromium pens markers crayons pastels lead mercury and selenium) water colours chalks etc Synthetic resin mainly composed of - Bis (2-ethylhexyl) phthalate (DEHP) Cl 19 polyvinyl chloride polyurethane - Dibutyl phthalate (DBP) lt Excluding the following gt and rubber for which phthalate - Butyl benzyl phthalate (BBP) Cl 193 compound is used as raw - Di-isononyl phthalate (DINP) material (including those - Di-isodecyl phthalate (DIDP) used for paint coating) - Di-n-octyl phthalate (DNOP) Metals used for toy (neither - Lead Cl 111 painted nor covered)

Page 3 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 65: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

36BTEST 37BCATEGORY

38B測試類別

39BITEM MATERIAL 40BOR PRODUCT TESTED

41B測試項目材料或產品

42BSPECIFIC TEST OR 43BPROPERTY MEASURED 44B特定測試或量度的特性

45BSPECIFICATION STANDARD METHOD 46BOR TECHNIQUE USED

47B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) Decals - Heavy metals Part III Section A -1 - Arsenic Origami paper - Heavy metals Part III Section A-2 - Arsenic Coating film of toys - Cadmium lead and arsenic Part III Section A-4 Coating film coated by - Potassium permanganate consumption Part III Section A-5 using Polyvinyl chloride - Evaporation of residue Parts (excluding coating - Potassium permanganate consumption Part III Section A-6 film) manufactured using - Heavy metals materials mainly composed - Cadmium of polyvinyl chloride - Evaporation of residue - Arsenic Synthetic resin whose - bis (2-ethylhexyl) phthalate (DEHP) Part III Section A-7 primary component is polyvinyl chloride Toys which are made of - Diisononyl phthalate (DINP) Part III Section A -8 paper wood bamboo rubber leather celluloid plastic metal or china and which naturally come into contact with infantsrsquo mouths during their use with synthetic resin whose primary component is polyvinyl chloride

Page 4 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 66: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-202 Effective date of termination 6 October 2014)

48BTEST 49BCATEGORY

50B測試類別

51BITEM MATERIAL 52BOR PRODUCT TESTED

53B測試項目材料或產品

54BSPECIFIC TEST OR 55BPROPERTY MEASURED 56B特定測試或量度的特性

57BSPECIFICATION STANDARD METHOD 58BOR TECHNIQUE USED

59B規範標準方法或應用技術 TOYS and CHILDRENrsquoS Chemical tests - (contrsquod) PRODUCTS (contrsquod) Specification and Standards for Foods Food 玩具及兒童產品 Additives etc Under the Japan Food (續上) Sanitation Law (Abstracts) JETRO 2008 Part ldquoVrdquoTOYS Test method for compliance testing Specification Standards and Testing Methods for Foodstuffs Implements Containers and Packaging Toys Detergents 2008 - Part III-Standards and Testing Methods for Toys (Following the tentative English translation published by JERTO January 2009) (contrsquod) Parts (excluding coating - Potassium permanganate consumption Part III Section A-9 film) manufactured using - Heavy metals materials mainly composed - Evaporation of residue of polyethylene - Arsenic Metallic accessories and - Lead Part III Section A-10 toys that might be swallowed by infants and small children Synthetic resin-based - Colouring agent Part III Section B colouring agents used in the manufacture of toys

Page 5 of 5

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 67: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - PRODUCTS 電氣及電子產品 Emission tests Household appliances - Measurement of terminal disturbance CISPR 14-1 2000 + A1 2001 + A2 2002 electric tools and similar Voltages EN 55014-1 2000 + A1 2001 + A2 2002 apparatus electric and - 1485 kHz to 30 MHz electronic toys - Measurement of disturbance power ltExcluding the followinggt - 30 MHz to 300 MHz - washing machines - Measurement of radiated disturbances - dish-washing machines - 30 MHz to 1 GHz - tumble dryers - centrifugal dryers - lifting devices -automatic goods-dispensing machines - entertainment machines - three-phase equipment Information technology - Measurement of terminal disturbance CISPR 22 1997 + A1 2000 equipment Voltages EN 55022 1998 + A1 2000 + A2 2003 lt Excluding the following gt - 150 kHz to 30 MHz lt Excluding the following gt - test volume diameter of - Measurement of radiated disturbances for the above two standards equipment gt 15 m - 30 MHz to 6 GHz Cl 107 - telecommunications terminal equipment ASNZS CISPR 22 2004 CISPR 22 2003 lt Excluding the following gt for the above two standards Cl 822 823 and 107 ASNZS CISPR 22 2006 CISPR 22 2006 lt Excluding the following gt for the above two standards Cl 62 96 106 and 109 EN 55022 2006 + A1 2007 ltExcluding the following gt Cl 96 108 and 109

Page 1 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 68: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

12BTEST

13BCATEGORY 14B測試類別

15BITEMS MATERIALS 16BOR PRODUCTS TESTED

17B測試項目材料或產品

18BSPECIFIC TESTS OR 19BPROPERTIES MEASURED

20B特定測試或量度的特性

21BSPECIFICATION STANDARD METHOD 22BOR TECHNIQUE USED

23B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Emission tests 電氣及電子產品 (續上) Electrical and electronic - Harmonic currents EN 61000-3-2 2000 + A2 2005 equipment having an input IEC 61000-3-2 2000 + A1 2001 + A2 2004 current up to 16A per phase and connected to 220V 230V or 240V supply system operating at 50 Hz or 60 Hz lt Excluding the following gt - three phase equipment - arc welding equipment - professional equipment Electrical and electronic - Measurement of voltage fluctuations and EN 61000-3-3 1995 + A1 2001 + A2 2005 equipment having an input flicker at the supply terminals of the IEC 61000-3-3 1994 + A1 2001 + A2 2005 current up to 16A per phase Equipment and connected to a supply - Short-term flicker indicator Pst system of line to neutral - Long-term flicker indicator Plt voltage between 220 V and - Relative voltage change d(t) 250 V at 50 Hz - Relative steady-state voltage change dc lt Excluding the following gt - Maximum relative voltage change dmax - three-phase equipment Electrical and electronic - Measurement of radiated disturbances ASNZS 42511 1999 apparatus intended for use in - 30 MHz to 1 GHz EN 61000-6-3 2001 + A11 2004 residential commercial - Measurement of terminal disturbance and light-industrial voltage environment for which no - 015 MHz to 30 MHz dedicated product or - Harmonic currents product-family emission - 0 kHz to 2 kHz standard exists - Voltage fluctuations and flicker lt Excluding the following gt - 0 kHz to 2 kHz - measurement of telecommunications network point

Page 2 of 3

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 69: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-196 Effective date of termination 22 July 2014)

24BTEST

25BCATEGORY 26B測試類別

27BITEMS MATERIALS 28BOR PRODUCTS TESTED

29B測試項目材料或產品

30BSPECIFIC TESTS OR 31BPROPERTIES MEASURED

32B特定測試或量度的特性

33BSPECIFICATION STANDARD METHOD 34BOR TECHNIQUE USED

35B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC EMC tests - (contrsquod) PRODUCTS (contrsquod) Immunity tests 電氣及電子產品 (續上) Electrical and electronic - Electrostatic discharge EN 61000-4-2 1995 + A1 1998 + A2 2001 equipment IEC 61000-4-2 1995 + A1 1998 + A2 2001 - Electrical fast transientburst EN 61000-4-4 2004 - 4 kV 550ns IEC 61000-4-4 2004 - Surge EN 61000-4-5 1995 + A1 2001 - 4 kV 1250 μs and 820 μs IEC 61000-4-5 1995 + A1 2000 lt Excluding the following gt for the above two standards Cl 62 632 73 74 75 and 76 Electrical and electronic - Conducted disturbance induced by radio EN 61000-4-6 1996 + A1 2001 equipment frequency fields IEC 61000-4-6 1996 + A1 2000 - 150 kHz to 230 MHz 3V (max) for the above two standards Cl 621 6222 and 623 EN 61000-4-6 2007 + Corr IEC 61000-4-6 2003 + A1 2004 + A2 2006 lt Excluding the following gt for the above two standards Cl 6212 622 and 623

Page 3 of 3

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181

Page 70: 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室 ......BS EN ISO 105 C10: 2007 JIS L0844-2005 - Water AATCC Test Method 107-2013 AS 2001.4.E01-2001 BS EN ISO 105

Registration No HOKLAS 004 Page 1 of 1

22 May 2014

Annex III

List of activities for which accreditation has been terminated (Notification letter no 004-194 Effective date of termination 15 April 2014)

0BTEST

1BCATEGORY 2B測試類別

3BITEMS MATERIALS 4BOR PRODUCTS TESTED

5B測試項目材料或產品

6BSPECIFIC TESTS OR 7BPROPERTIES MEASURED

8B特定測試或量度的特性

9BSPECIFICATION STANDARD METHOD 10BOR TECHNIQUE USED

11B規範標準方法或應用技術 ELECTRICAL and ELECTRONIC Safety tests - PRODUCTS (contrsquod) Electrical accessories 電氣及電子產品 (續上) - 5 A and 15 A plugs - Compliance inspection and safety tests BS 546 1950 with PD 1752 PD 4389 Amd 251 socket outlets and Amd 2307 Amd 4045 Amd 5809 Amd 6144 and socket outlet adaptors Amd 8914 lt Excluding the following gt Supplement No 2 (1987) and rubber hardness testing to cl 4 of Supplement No 1 are conducted according to inhouse method TG-EL-03 2008 - 15 A plugs and switched - Compliance inspection and safety tests SS 472 1999 + Erratum No1 2001 socket outlets - Electrical accessories - Compliance inspection and safety tests BS 5733 1995 with Amd 9157 and Amd 16216 not covered by other lt Excluding the following gt specific British Standards Cl 134 (tests for resistance to corrosion of steel lt Excluding the following gt and cast iron boxes to cl 1103 of BS 4662 1970) - jet-proof (IPX5) accessories and 181