EcoBell2 SL Direct Charge - Amazon Web Services...EcoBell2 SL External Charge Description The high-speed rotating atomizer EcoBell2 SL EC is suitable for the electrostatic application

Centricorp (M) Sdn. Bhd.

Value Gripper

Description

Concept

-Twisted and uneven products-Very economical compared with other tools-Vacuum source included (ejectors)-80% minimum coverage

Benefits

-Ready to install (self-contained)-Quick pick and release-Simple to use-Low maintenance

EcoBell2 SL Direct Charge

Description

The high-speed rotating atomizer EcoBell2 SL DC is suitable for theelectrostatic application of all paint or for painting without high tension(approx. 20% increased transfer efficiency compared to air spray guns). Ithas been developed especially for high paint flow rates and high paintingspeeds. The bell disk is powered by an air turbine and the charging of thepaint material sprayed at the bell cup edge by centrifugal energy iseffected by direct connection of a high voltage to the paint material(internal charge).

1 of 99

2 of 99

EcoBell2 SL External Charge

Description

The high-speed rotating atomizer EcoBell2 SL EC is suitable for theelectrostatic application of all water borne paint. It was developedespecially for high paint flow rates and high painting speeds. The bell diskis powered by an air turbine. The paint material, atomized at the bell diskedge by centripetal force is charged with external high tension electrodes.Homogeneous atomizing at flow rates of 50ml/min to 700ml/min producessignificantly greater painting capacity, whilst maintaining the surfacequality that is expected from the EcoBell2 SL EC atomizer.

Full Size Gravity Feed EcoGun AS MAN 1GF119

Description

This ultra-light, perfectly balanced, gravity feed air spray gun has beendesigned for high quality coating and is particularly suitable for finalcoatings in the automotive industry, the refinishing market as well as inmachining and wood working sectors with the added advantage of thehighest levels of quality and userfriendliness. Regulation for inlet air of theEcoGun 119 enables smooth change of the atomization pressure,achieving perfect painting at high transfer efficiency. During thedevelopment of this spray gun the aim was to keep it easy to clean and tomaintain at all times.

3 of 99

4 of 99

Full Size Gravity Feed EcoGun AS MAN 2GF910

Description

The EcoGun 910 is a 2-piston state-of-the-art gravityfeed air spray gun.Designed for professional use, performance and durability are itsdistinguishing characteristics in order to meet highest demands. Viaexchangeable air caps with different atomization performance, this spraygun ensures maximum flexibility. User-friendly handling is guaranteed bythe light weight and ergonomic body. The EcoGun 910 is predestined forthe automotive and general industry, refinishing, wood and glass painting,but also equally suitable for almost any other paint coating purposes.

Full Size Pressure Feed EcoGun 910S

Description

The EcoGun 910S is a 2-piston state-of-the-art pressure-feed air spraygun. Designed for professional use, performance and durability are itsdistinguishing characteristics in order to meet highest demands. Viaexchangeable air caps with different atomization performance, this spraygun ensures maximum flexibility. User-friendly handling is guaranteed bythe light weight and ergonomic body. The EcoGun 910S is predestined forthe automotive and general industry, refinishing, wood and glass painting,but is also equally suitable for almost any other paint coating purposes.

5 of 99

6 of 99

Full Size Pressure Feed EcoGun 249

Description

This ultra-light, perfectly balanced air spray gun with pressure paintfeeding is particularly suitable for final coatings in the automotive industry,the refinishing market as well as in machining and wood working sectors.Special nozzle kits for abrasive materials such as enamel and glazesmake this EcoGun also the ideal choice for the ceramic industry. With itsaluminum body and nickel-coated surface the EcoGun 249 is robust,resistant to all mediums and ideal for daily use.

EcoGun2 AS AUTO

Description

The EcoGun2 AS AUTO is an automatic air spray gun designed for theautomotive industry, especially for coatings that require reproductive spraypatterns. It is suitable for water and solvent based media and can beinstalled on robots. As the atomizer part of the EcoGun2 AS AUTO iseasily detachable from the body the maintenance time can be significantlyreduced resulting in almost no production downtime.

7 of 99

8 of 99

EcoGun AS AUTO

Description

The Eco Gun AS AUTO is a fully automatic airspray gun that has beendesigned for first class quality coating of liquid paints such as clear andbase coats in the automotive, wood working, machining and constructionindustry. It is equipped with an internal air regulation and therefore onlyrequires an „on-off“ impulse via a control valve. Remote control of spraypattern is possible by simply substituting the manual adjustment by astandard push-in air connection.

EcoGun AS AUTO EcoGun AS AUTO MiniFS

Description

The EcoGun AS AUTO Mini FS is the answer to painting small areas, fordot marking and gluing. It is equipped with an internal air regulation andtherefore only requires an „on-off“-impulse via a control valve. Thisenables easy integration into automated systems. An optionally availableadapter enables remote control of spray pattern. During the developmentof the EcoGun AS AUTO Mini FS the aim was to keep it easy to clean andmaintain at all times.

9 of 99

10 of 99

EcoGun AS AUTO EcoGun AS AUTO MiniRS

Description

The EcoGun AS AUTO Mini RS is the answer to painting small areas, fordot marking and gluing. The spray pattern is exclusively round spray. TheEcoGun AS AUTO Mini RS is equipped with an internal air regulation andtherefore only requires an „on-off“- impulse via a control valve. Thisenables easy integration into automated systems. During the developmentof the EcoGun AS AUTO Mini RS the aim was to keep it easy to clean andto maintain at all times.

EcoGun AA MAN EcoGun 256

Description

With an operating pressure of up to 250bar, the EcoGun 256 is the perfectsolution for air assisted paint application and is equally suitable for solventand water-based coating materials, mainly used in machining and woodworking sectors. Beneficial highlights are a material path manufacturedcompletely of stainless steel, sealings in contact with applied materials ofmodified plastics, such as PTFE, PE-UHMW, POM, and the availability ofa closing valve (valve ball and seat) in tungsten carbide version. TheEcoGun 256 offers a wide range of high-pressure spray nozzles withthree optional material inlets.

11 of 99

12 of 99

EcoGun AA MAN EcoGun 2100

Description

The EcoGun 2100 perfectly suits air assisted paint application withpressures up to 250bar and can be used for water and solvent-bornecoating materials. It has been designed especially for paint application inthe machining and wood working industry. The EcoGun 2100 offers awide range of high-pressure spray tips. The complete material path ismade of stainless steel and there are two options for material filtration withthree different mesh sizes.

EcoGun AL MAN 300

Description

With an operating pressure of up to 300bar, the EcoGun AL MAN 300 isthe perfect solution for airless paint applications and is equally suitable forsolvent and water-based coating materials, mainly used in machining,construction and wood working sectors. Beneficial highlights are amaterial path manufactured completely of stainless steel, sealings incontact with applied materials of modified plastics, such as PTFE, PE-UHMW, POM, and the availability of a closing valve (valve ball and seat)in tungsten carbide version. The EcoGun AL MAN 300 offers a widerange of high-pressure spray nozzles with three optional material inlets.To facilitate application of areas difficult to access e.g. ceilings, roofs,inner surfaces of pipes, the EcoGun AL MAN 300 has numerous optionalaccessories as extensions and dedicated hoses.

13 of 99

14 of 99

EcoGun AL AUTO

Description

With an operating pressure of up to 300bar, the EcoGun AL AUTO is anoutstanding solution for airless paint applications and is equally suitablefor solvent and water-based coating materials, mainly used in automatedmachining, construction and wood working sectors. Beneficial highlightsare a material path manufactured completely of stainless steel, sealings incontact with applied materials of modified plastics, such as PTFE, PE-UHMW, POM, and the availability of a closing valve (valve ball and seat)in tungsten carbide version. The EcoGun AL AUTO offers a wide range ofhigh-pressure spray nozzles. During the development of this spray gun theaim was to keep it easy to clean and maintain at all times.

EcoMCC3 20 2C C PM

Description

The EcoMCC3 20 Color Changer has been designed for rapid colorchanges in atomizer color supply. During construction great emphasiswas laid on an optimal feed to realize an overall concept for the minimumof loss of color and maximum maintenance friendliness. This color changeand valve generation can be used with all the conventional filters for wateror solvent borne primer paints, top coating, and 1K clear varnishes in theautomotive supply industry. Rails and control valves are supplied insynthetic material to enable weight optimization. The EcoMCC3 20 can beutilized alone or in combination with EcoBell or EcoGun product package

EcoMCC3 20 2C D PM

Description


EcoMCC3 20 4C C PM

Description

The EcoMCC3 20 Color Changer has been designed for rapid colorchanges in atomizer color supply. During construction great emphasis

15 of 99

was laid on an optimal feed to realize an overall concept for the minimumof loss of color and maximum maintenance friendliness. This color changeand valve generation can be used with all the conventional filters for wateror solvent borne primer paints, top coating, and 1K clear varnishes in theautomotive supply industry. Rails and control valves are supplied insynthetic material to enable weight optimization. The EcoMCC3 20 can beutilized alone or in combination with EcoBell or EcoGun product package

EcoMCC3 20 4C D PM

Description


EcoMCC3 20 6C C PM

Description


EcoMCC3 20 6C D PM

Description


EcoMCC3 20 8C C PM

Description

The EcoMCC3 20 Color Changer has been designed for rapid colorchanges in atomizer color supply. During construction great emphasis

16 of 99

was laid on an optimal feed to realize an overall concept for the minimumof loss of color and maximum maintenance friendliness. This color changeand valve generation can be used with all the conventional filters for wateror solvent borne primer paints, top coating, and 1K clear varnishes in theautomotive supply industry. Rails and control valves are supplied insynthetic material to enable weight optimization. The EcoMCC3 20 can beutilized alone or in combination with EcoBell or EcoGun product package

EcoMCC3 20 8C D PM

Description


EcoMCC3 20 10C C PM

Description


EcoMCC3 20 10C D PM

Description


EcoMCC 200 2C D SST

Description

The EcoMCC 200 is a color changer solution for airless or air-mixvarnishing of water and solvent based paint. Due to its short switching

17 of 99

times the EcoMCC 200 is also suitable as a dosing valve in 2Kapplication. The color change is effected quickly thanks to short flushingand low dead space. An additional chamber is distinguished to allow aplasticizer that prevents both, hardening of the media on the valve needle,and higher wear and tear.

EcoMCC 200 4C D SST

Description

The EcoMCC 200 is a color changer solution for airless or air-mixvarnishing of water and solvent based paint. Due to its short switchingtimes the EcoMCC 200 is also suitable as a dosing valve in 2Kapplication. The color change is effected quickly thanks to short flushingand low dead space. An additional chamber is distinguished to allow aplasticizer that prevents both, hardening of the media on the valve needle,and higher wear and tear.

EcoMCC 200 6C D SST

Description


EcoMCC 200 8C D SST

Description


EcoMCC 200 10C D SST

Description

The EcoMCC 200 is a color changer solution for airless or air-mixvarnishing of water and solvent based paint. Due to its short switchingtimes the EcoMCC 200 is also suitable as a dosing valve in 2K

18 of 99

application. The color change is effected quickly thanks to short flushingand low dead space. An additional chamber is distinguished to allow aplasticizer that prevents both, hardening of the media on the valve needle,and higher wear and tear.

Agitator A MAN R PR 75 330


19 of 99

20 of 99



21 of 99

22 of 99



23 of 99

24 of 99



25 of 99

26 of 99

Agitator A FIX R PR 185 580

Description

The Agitator A FIX R PR 185 580 has been designed for preparation ofpaint before application or to prevent paint settling during spraying. It issuitable for 60 liter barrels. Various stainless steel propellers are availableand revolution speed regulation enables easy operation. A pneumaticdrive allows safe use in a paint shop environment.

Customer Benefits:

-Suitable for paint shops-Different propellers available-Revolution speed regulation-Stainless steel shaft and propeller-Easy operation

Agitator A FIX R PR 185 860

Description

The Agitator A FIX R PR 185 860 has been designed for preparation ofpaint before application or to prevent paint settling during spraying. It issuitable for 200 liter barrels. Various stainless steel propellers areavailable and revolution speed regulation enables easy operation. Apneumatic drive allows safe use in a paint shop environment.

Customer Benefits:

-Suitable for paint shops-Different propellers available-Two propellers in line-Revolution speed regulation-Stainless steel shaft and propeller-Easy operation-ATEX Ex II 2G X

27 of 99

Pressure Pot 10

Description

The Pressure Pot 10 has a volume of 9,9 liters and is suitable for all fluidsand solvents supplying either manual or automatic spray guns. ThePressure Pot 10 is made of aluminum alloy and can be optionallyequipped with an inner stainless steel pot. All material contacting parts aremade of stainless steel and aluminium. The pressure pot

Pressure Pot 10A

Description

The Pressure Pot 10 A has a volume of 7,5 liters and is suitable for allfluids and solvents supplying either manual or automatic spray guns. Ithas an integrated pneumatic agitator for continuous stirring of materialduring the application. The Pressure Pot 10 A is made of aluminum alloyand is equipped with an inner stainless steel pot. All material contactingparts are made of stainless steel and aluminium. The pressure pot can bemounted on a trolley for easier handling.

28 of 99

29 of 99

Pressure Pot 20

Description

The Pressure Pot 20 has a volume of 20 liters and is suitable for solventborne materials supplying either manual or automatic spray guns. Thepressure pot and its material path are made of high-grade steel with aPTFE coating ensuring easy maintenance and durability. Its inner steelpot is made of stainless steel. Thanks to four integrated wheels thepressure pot can be moved easily.

Pressure Pot 20A

Description

The Pressure Pot 20 A has a volume of 20 liters and is suitable for solventborne materials supplying either manual or automatic spray guns. It isequipped with an agitator for manual preparation of paint beforeapplication. The pressure pot and its material path are made of high-gradesteel with a PTFE coating ensuring easy maintenance and durability. Itsinner steel pot is made of stainless steel. Thanks to four integrated wheelsthe pressure pot can be moved easily.

30 of 99

31 of 99

Pressure Pot 40

Description


Pressure Pot 40A

Description


32 of 99

33 of 99

Pressure Pot 60

Description


Pressure Pot 60A

Description


34 of 99

35 of 99

EcoFlow LPF P 7 2,5 G1/8″ SST

Description

The EcoFlow LPF is a low pressure flow regulator that has been designedto maintain downstream pressure in application supply systems. Bycontrolling the fluid pressure to the required working pressure,subsequently connected applicators are protected against pressure surgeand pulsation from the material supply, whilst perfect flow characteristicsfor the application process are ensured. Typically handled materials arewater and solvent borne paints, varnishes, enamels and lacquers.

EcoFlow LPF

Description

The EcoFlow LPF is a low pressure flow regulator that has been designedto maintain downstream pressure in application supply systems. Bycontrolling the fluid pressure to the required working pressure,subsequently connected applicators are protected against pressure surgeand pulsation from the material supply, whilst perfect flow characteristicsfor the application process are ensured. Typically handled materials arewater and solvent borne paints, varnishes, enamels and lacquers.

36 of 99

37 of 99

EcoFlow HPF P 310 5 G3/4″ A

Description

The EcoFlow HPF is a high pressure flow regulator that has beendesigned to maintain downstream pressure in application supply systems.By controlling the media pressure to the required working pressure,subsequently connected applicators are protected against pressure surgeand pulsation from the material supply, whilst ensuring perfect pressureand flow characteristics for the application process. Typically handledmaterials are highly viscose media such as mastics, sealers, pastes,adhesives or glues.

EcoFlow HPR P 310 20 G3/4″ ALU

Description

The EcoFlow HPR is a high pressure return regulator that has beendesigned to maintain consistent back pressure in application supplysystems. By controlling the fluid pressure to the required workingpressure, applicators are protected against pressure surge and pulsationfrom the material supply, whilst perfect flow characteristics for theapplication process are ensured. The EcoFlow HPR is easy to maintainwith a 100% tight sealing function and compact dimensions. Typicallyhandled materials are highly viscose media such as mastics, sealers,pastes, adhesives or glues.

38 of 99

39 of 99

EcoFlow LPR P 16 15 DN25 SST

Description

The EcoFlow LPR is a low pressure return regulator that has beendesigned to maintain consistent back pressure in application supplysystems. By controlling the fluid pressure to the required workingpressure, applicators are protected against pressure surge and pulsationfrom the material supply, whilst perfect flow characteristics for theapplication process are ensured. EcoFlow LPR is easy to maintain with a100% tight sealing function and compact dimensions. Typically handledmaterials are water and solvent-borne paints, varnishes, enamels andlacquers.

EcoFlow LPR P 16 25 DN25 SST

Description


40 of 99

41 of 99

EcoFlow LPR P 16 30 G3~4 SST

Description


EcoFlow LPR M14 G3~4 SST

Description


42 of 99

43 of 99

Pressure Relief Valve 16bar DN25 SST

Description

As an enhancement to the Eco Pump HPE the Pressure Relief Valveprevents possible damages caused by unpredictable excess pressure. Itis simply connected directly to the outlet of the pump. Protection againstpressure peaks and improper use- e.g. closing ball valves is guaranteed.By using the optionally available sensor in the relevant port, the pressurerelief valve is the perfect interface to allow full closed-loop functionality.Typical fluids include water and solvent borne paints, varnishes, enamelsand lacquers.

Pressure Relief Valve 21bar DN25 SST

Description


44 of 99

45 of 99

Pressure Relief Valve Sensor 21bar DN25

Description

As an enhancement to the EcoPump HPE the Pressure Relief Valveprevents possible damages caused by unpredictable excess pressure. Itis simply connected directly to the outlet of the pump. Protection againstpressure peaks and improper use- e.g. closing ball valves is guaranteed.By using the optionally available sensor in the relevant port, the pressurerelief valve is the perfect interface to allow full closed-loop functionality.Typical fluids include water and solvent borne paints, varnishes, enamelsand lacquers.

Pressure Relief Valve Sensor 16bar DN25

Description


46 of 99

47 of 99

EcoPump VP 250 360

Description

The EcoPump VP is a pneumatically driven vertical piston pump formedium and high-pressure applications. Proven design and long termdurability make these pumps a perfect choice for small and middleapplications of paint, mastics and adhesives to furniture, steel structuresor walls, car bodies and other objects. The EcoPump VP is suitable forairless or air-assisted application and is available in numerousconfigurations with various air inlet modules, pressure relief valves,trolleys and adjacent devices.

EcoPump VP 1000 90

Description


48 of 99

49 of 99

EcoPump VP 110 225

Description


EcoPump VP 90 280

Description


50 of 99

51 of 99

EcoPump VP 55 445

Description


EcoPump VP 55 310

Description


52 of 99

53 of 99

EcoPump VP 55 200

Description


EcoPump HP 400 21

Description

The EcoPump HP is an air-driven horizontal piston pump. It has beenmanufactured and tested according to Dürr’s well-proven qualitystandards. Performance and durability are further distinguishingcharacteristics in order to meet the highest of demands. With a concealedshaft seal this EcoPump HP is primarily designed for paint circulationsystems as well as fluid transfer and supply. A horizontal two pistondesign guarantees equal thrust on both strokes and a rapid pump change-over with a quick release valve for reduced surge. Its modular designenables easy maintenance and an extensive range of accessories arealso available. Typically handled fluids are water and solvent borne paints,varnishes, enamels and lacquers.

54 of 99

55 of 99

EcoPump HP 800 21

Description

The EcoPump HP is an air-driven horizontal piston pump. It has beenmanufactured and tested according to Dürr’s well-proven qualitystandards. Performance and durability are further distinguishingcharacteristics in order to meet the highest of demands. With a concealedshaft seal this EcoPump HP is primarily designed for paint circulationsystems as well as fluid transfer and supply. A horizontal two pistondesign guarantees equal thrust on both strokes and a rapid pump change-over with a quick release valve for reduced surge. Its modular designenables easy maintenance and an extensive range of accessories arealso available. Typically handled fluids are water and solvent borne paints,varnishes, enamels and lacquers.

EcoPump AD 72 8,3 ACE PTFE 1~4

Description

A wide choice of manufacturing materials for the pump housing makes theEcoPump AD the best solution for different kinds of fluid handling such asabrasive and particle containing fluids. The typical field of application ofthe EcoPump AD is to handle oil and water, viscos and waste liquids withand without solid particle debris, water and solvent borne paints,varnishes, enamels and lacquers, operating in circulation or direct fluiddelivery. The simple design of the EcoPump AD allows easy maintenanceand service.

56 of 99

57 of 99


Description



Description


58 of 99

59 of 99

EcoPump AD 150 6,9 ALU PTFE 1~2

Description


EcoPump AD 150 6,9 SST PTFE 1~2

Description


60 of 99

61 of 99

EcoPump AD 600 8,3 ALU PTFE 1

Description


EcoPump AD 600 8,3 SST PTFE

Description


62 of 99

63 of 99

EcoPump AD 2420 8,3 SST PTFE 1 1~2

Description


EcoPump9 GW 20 0,45

Description

The EcoPump9 GW is a highly efficient gearwheel pump, cavity-free whenexecuted in compact configuration, achieving a perfect color change witha very low purging time. It has been manufactured and tested according toDürr’s well-proven quality standards. Performance and long life are furtheroutstanding features that meet highest requirements. Based on decadesof experience in the area of paint application, the EcoPump9 GW hasemerged as the perfect device for 1K and 2K dosing of water and solventbased paint.

64 of 99

65 of 99

EcoPump9 GW 20 1.0

Description


EcoPump9 GW 20 3.0 Bypass SHV

Description


66 of 99

67 of 99

EcoPump9 GW 20 2.0

Description


EcoPump9 GW 20 4.5 Bypass SHV

Description


68 of 99

69 of 99

EcoPump9 GW 20 4.5 SHV

Description


EcoDose 2K

Description

The EcoDose 2K is an electronic dosing system suitable for high and lowpressure applications. It can be used in manual and automatic processes.

Optimized for quick color changes and easy flushing, it enhancesresource utilization and contributes to higher application efficiency. Fluidsare measured consistently and precisely, even media with differentviscosities.

Typical fluids handled are 1 or 2K materials, water- and solventbornepaints, varnishes, lacquers and monolayer paints.

-Exact volume controlled dosing of both components-High and constant mix accuracy-Automatic color change controlled by volume-Independent flushing circuits for both components

70 of 99

IRB 360

Description

ABB’s IRB 360 family of robots, more commonly known as the FlexPicker,can handle payloads of between 1 kg and 8 kg. Each of the family’svariants is capable of the fastest picking applications and have beenoptimized for packing applications. The robot has outstanding motionperformance with the shortest cycle times, precision accuracy and highpayloads.

IRB 120

Description

The IRB 120 robot is the latest addition to ABB¡¯s new fourth-generationof robotic technology and ABB¡¯s smallest robot ever produced. Ideal formaterial handling and assembly applications, the new IRB 120 robotprovides an agile, compact and lightweight solution with superior controland path accuracy.

71 of 99

IRB 140

Description

Compact, powerful IRB 140 industrial robot. Six axis multipurpose robotthat handles payload of 6 kg, with long reach (810 mm). The IRB 140 canbe floor mounted, inverted or on the wall in any angle. Available asStandard, Foundry Plus 2, Clean Room and Wash versions, allmechanical arms completely IP67 protected, making IRB 140 easy tointegrate in and suitable for a variety of applications. Uniquely extendedradius of working area due to bend-back mechanism of upper arm, axis 1rotation of 360 degrees even as wall mounted.

The compact, robust design with integrated cabling adds to overallflexibility. The Collision Detection option with full path retraction makesrobot reliable and safe.

IRB 260

Description

The IRB 260 is based on IRB 2400, the world’s most popular industrialrobot with a total of 14,000 installations. Designed for easy integration intopackaging lines, the new machine has the ability to work close to base inorder to minimize floor space. Low on weight and height, the IRB 260 fitseasily into compact production cells. Speed, moreover, has beenoptimized for an 800x800x800 mm working envelope, making the newrobot ideal for packing applications. Running on 4-axes, it’s not onlydedicated to packing applications, but also ensures high throughput andflexible packing concepts. Like all ABB robots, IRB 260 can be combinedwith PickMaster – ABB’s vision guided packaging software – and our newIRC5 controller.

72 of 99

IRB 460

Description

The IRB 460 is a compact palletizing robot perfect for end-of-linepalletizing and bag palletizing applications. The 4-axis robot is the fastestof its kind and its small footprint makes it ideal for fitting into existingpacking lines.

IRB 660

Description

The IRB 660 is a dedicated palletizer that blends speed, reach andpayload like no other robot on the market. This is an exceptionally fast 4-axis machine that combines a 3.15 meter reach with a 250 kg payload,making it ideal for palletizing bags, boxes, crates, bottles and more.

IRB 910SC SCARE

Description

In designing its Selective Compliance Articulated Robot Arm (SCARA), orIRB 910SC, ABB has delivered a single arm robot capable of operating ina confined footprint. ABB’s SCARA is ideal for the Small Parts Assembly,Material Handling and parts inspection.

IRB 760

Description

The IRB 760 is a palletizing robot perfect for full-layer palletizing. The 4-axis robot can move and rotate large and heavy products at high speeds,

73 of 99

and with the utmost care. It’s compact design makes it ideal for fitting intoexisting packing lines.

IRB 1200

Description

As a family of r obots, the IRB 1200 comes in two variants which canhandle a wide range of applications and ar e cost effective due tocommonality of parts. The 700 mm r each variant can carry a payload ofup to 7 kg, while the longer reach 900 mm variant can carry up to 5 kg ofpayload. The IRB 1200 excels in situations that r equire a compactpackage without sacrificing working range or functionality . Short throwdistances between operations make for faster cycle times in as small acell as possible, meaning you can do mor e with less. The IRB 1200—better by design and best in class.

IRB 1410

Description

The IRB 1410 gives you fast and reliable work cycles that boostproductivity. The robot is proven in arc welding applications and providesoutstanding performance and value, ensuring short payback times.

IRB 1410 is known for its stiff and robust construction. This translates intolow noise levels, long intervals between routine maintenance and longservice life. The robot has a large working area and long reach. Thecompact design, very slim wrist and high performance operation even indifficult and restricted locations.

74 of 99

IRB 1520ID

Description

With IRB 1520ID (Integrated Dressing), the hose package is totallyintegrated into the upper arm and through the base of the robot. Thismeans, all media necessary for arc welding, including power, weldingwire, shielding gas and pressurized air is routed for maximizedperformance and energy efficiency. The IRB 1520ID delivers stablewelding, excellent path accuracy, short cycle times and extended lifeexpectancy of the hose package. Thanks to the integrated dressing,welding around cylindrical objects can be carried out without any stops andnarrow spaces are more easily accessed.

IRB 1600

Description

The IRB 1600 has up to 50 percent shorter cycle times than competingrobots in material handling, machine tending and process applications. Itspeeds up and slows down faster than other robots, saving time whilemoving between tasks. This is possible due to ABB’s patented secondgeneration QuickMove motion control, combined with the robot’s strongmotors and low friction losses in the spur gears.

IRB 1600ID

Description

In IRB 1600ID (Integrated Dressing), all cables and hoses are routedinside the upper arm, making the robot perfectly suitable for arc welding.The dress pack carries all the media necessary for arc welding, includingpower, welding wire, shielding gas and pressurized air.

IRB 2400

75 of 99

Description

IRB 2400 comprises a complete family of application optimized robots thatmaximize the efficiency of your arc welding, process and tendingapplications. The IRB 2400 is a real hard worker. It can take additionally35 kg load on axis 1 and up to 12 kg additional load on the upper arm –still keeping 100 % duty cycle. Other models offer handling capacity of upto 20 kg, excellent motion control, large load offset and unlimited motion inaxis 6.

IRB 2600

Description

The IRB 2600 is the second model in the sharp generation range withenhanced and new capabilities. It is a compact robot with a high payloadcapacity. The design has been optimized for targeted applications like arcwelding, material handling and machine tending. The IRB 2600 isavailable in three variants, with options for floor, wall, shelf, tilted orinverted mounting configurations.

IRB 2600ID

Description

The IRB 2600ID robot range features a unique combination of highpayload capacity, large working range and Integrated Dressing (ID), whichroutes all cables and hoses inside the robot’s upper arm and wrist. Theserobots can reduce cycle times by up to 15%, significantly increasingproduction output in applications like arc welding, materials handling andmachine tending.

76 of 99

IRB 4400

Description

An extremely fast, compact robot for medium to heavy handling.Exceptional all-round capabilities make it suitable for a variety ofmanufacturing applications. The load capacity of 60 kg at very highspeeds usually permits handling of two parts at a time. A rigid, well-balanced design and patented TrueMoveTM function provide smooth andfast movement throughout the entire working range. This ensures veryhigh quality in applications such as cutting. Rapid maneuverability makesthe IRB 4400 perfectly matched for applications where speed andflexibility are important. The compact design and protected versionsenables use in situations where conventional robots cannot work, such asfoundry and spraying applications. The foundry plus version is IP 67protected and can be washed with high pressure steam, which makes itideal for use in harsh environments.

IRB 4600

Description

The IRB 4600 is a pioneer of the sharp robot generation; with enhancedfea – tures and new capabilities. The design has been optimized to makeit superior for the targeted applications. The IRB 4600 enables morecompact manufacturing cells with increased production output and higherquality – and that means improved productivity.

IRB 6620

Description

The new lightweight IRB 6620 is easier to install, has a lower investmentcost and a wide working range. The working range for the robot below itsbase is an interesting approach for a re-design of spot welding workingcells (semi-shelf). This means you can have a second level of robots onthe line, where 50 % of the robot line can weld upside down. This savesspace and gives more efficient integration of the robots in the working cell.More robots in the same area increases the productivity.

IRB 6620LX

77 of 99

Description

ABB’s IRB 6620LX has the combined advantages of both linear axis andarticulated robots, resulting in a 6-axis robot with a 150-kg capacity, largescalable work envelope and the inherent flexibility of ABB’s articulatedrobots. It is designed with high performance and reliability in mindresulting in high productivity and utilization.

IRB 6640

Description

The IRB 6640 / IRB 6640ID is available in different arm lengths andmatching handling capacities. It is based on proven components fromearlier generations, to ensure ease of maintenance and exchangeabilityas well as high up time.

IRB 6650S

Description

The IRB 6650 Shelf r obot offers a unique working envelope. The IRB6650S is capable of a full vertical and horizontal stroke motion, as well asan incr eased reach forward and down. This combination offers newpossibilities to r obot functions in numerous application areas.

78 of 99

IRB 6660FX

Description

The IRB 6660FX raises the bar in Press Automation to provide customerswith more flexibility at greater speeds while saving precious press-shopfloor space.

IRB 6700

Description

The IRB 6700 family of robots is a natural evolution following 40 years oflarge robot heritage at ABB. This 7th generation of large ABB robotsfeatures a multitude of next generation improvements derived fromintimate customer relationships and exhaustive engineering studies.

IRB 7600

Description

The IRB 7600 is ideal for heavy applications, regardless of industry.Typical uses include the handling of heavy fixtures and parts, turning carbodies, lifting engines, in foundries or forges, loading and unloading ofmachine cells. It can also be used to lift large, heavy pallet layers.

IRB 8700

79 of 99

Description

In designing the IRB 8700 the focus was on delivering a very reliable robotwith a low total cost of ownership. Through a combination of robustdesign elements, including simpler parts configurations where possible,ABB Robotics applied decades of engineering experience to combine thehigh performance customers require with low overall maintenance needs.

IRB for 6660 Pre-Machining

Description

High productivity in cleaning and pre-machining applications requires astiff and robust robot. The IRB 6660 has a parallel arm structure, and ingeneral, a very compact and sturdy mechanical design. Its special dualbearing design and powerful gears and motors provide additional supportfor handling fluctuating process forces common within applications suchas milling, deburring and grinding.

IRB for 6660 Press Tending

80 of 99

Description

High productivity in cleaning and pre-machining applications requires astiff and robust robot. The IRB 6660 has a parallel arm structure, and ingeneral, a very compact and sturdy mechanical design. Its special dualbearing design and powerful gears and motors provide additional supportfor handling fluctuating process forces common within applications suchas milling, deburring and grinding.

IRB 1400 YuMi

Description

YuMi is the first truly collaborative dual armed robot, designed for a worldin which humans and robots work together. Intentionally designed toresemble its human counterparts to be friendly and non-threatening with acompact, dual-arm body which requires no more space than a humanworkstation.

IRB 580

Description

IRB 580 combines the advanced functions of the IRB 5400 series with acompact design. The result is a highly flexible, costeffective and accuratepaint robot system.

81 of 99

IRB 52

Description

The IRB 52 is designed for painting – fully prepared for integrated paintprocess equipment. It utilizes the powerful and well proven IntegratedProcess System (IPS) for high speed process control – synchronized withthe superior IRC5P motion system.

IRB 5350

Description

The IRB 5350 door opener robot is a compact and pr ecise robot assistantfor automotive interior painting, both for stop-and-go and moving-linesolutions. A specially designed door opener tool with integrated sensorsfor search and force feedback makes this an efficient and important part ofthe inte – rior paint zone.

IRB 5400

Description

The IRB 5400 uses the IRC5P paint robot control system. It is specificallydesigned for the paint shop with its user friendly Ex FlexPaint Pendant andRobView 5 – our paint cell software for supervision, control anddiagnostics, and our powerful software tools for off-line programming andprocess tuning.

IRB 5500-22

Description

82 of 99

The IRB 5500 FlexPainter takes painting closer to perfection byintegrating the paint application equipment. Combined with its large workarea and high acceleration and painting speed, the result is the mostefficient and flexible paint robot solution for basically any application.

IRB 5500-25

Description

The Elevated Rail for the IRB 5500 system is one of the most advancedpaint solutions available on the market. Ideally suited for both interior andexterior automotive painting as well as other paint applications, thesystem expands the fl exibility of the IRB 5500 FlexPainter, which is themost versatile working envelope of any paint robot.

Bag grippers

Description

Handling of limp, non-rigid objects such as bags, shrink-wraps or anyproduct that fully covers the suction chamberOn board vacuum generation via high performance ejectors for optimumsuction powerDust-resistant designSealing foam with optimum adjustment to product surface – easy toreplaceOptional side channel blower for handling very porous goods

Connection elements gripper – robot

Description

Example A: Installation of grippers on robots without removal of the plateExample B: For vertical movements between robot and gripperExample C: For 3-axis movements between robot and gripperExample D: For connection of multiple or longer gripper systems, 3-axismovement

Sealing foam for vacuum grippers

Description

83 of 99

Firm grip on the gripper bottomQuick, residue-free replacement without pre-handling or toolsDifferent foams for a broad range of applications

Pick-up and release system

Description

Combination of gripper box mounted on foam gripper and blower boxOne pneumatically powered cylinder each ensures a high value for therated flow and proactive vacuum controlThis enables short gripping times and minimizes blower powerconsumptionIn addition to reducing power consumption, automatic venting afterrelease also ensures long service life as blower is not continouslyexposed to vacuum

Low-leak suction plates – SPLT

Description

Combination of 4×4 or 6×6 bellows suction cups with 2.5 bellows in oilresistant NBRSuction plate suspended using a spring plunger with internal vacuumchannel (25 mm stroke)Off-center vacuum connection possibleReliable suction with variable product geometries

84 of 99

Vacuum grippers with closing valves

Description

Automated handling of individual products or product layers withoutgripper changeSuitable for rigid products with an even or uneven surfaceIntegrated valves seal unused suction openings without loss of grippingforceLarge valve openings reduce sensitivity to dirt and ensure maximumsuction powerFast and uniform vacuum distribution ensures short cycle times and highacceleration ratesSeparate compressed air connection for blow-off function for fast productreleaseSealing foam for gentle product contact and optimum vacuum sealing –can be quickly replaced without tools and without leaving any residue

Vacuum grippers with reduced leakage

Description

Automated handling of individual products or product layers withoutgripper changeSuitable for rigid products with an even or uneven surfaceFast and uniform vacuum distribution ensures short cycle times and highacceleration ratesSeparate compressed air connection for blow-off function for fast productreleaseSealing foam for gentle product contact and optimum vacuum sealing –can be quickly replaced without tools and without leaving any residue

Inline pressure regulators with pressuregauge

Description

Defined reduction in operating pressure for ejectors, limitation of holdingforce of grippersEasy installation thanks to vertical and horizontal cross-holesPressure adjustment by means of knurled screw, pressure monitoring bymeans of gauges (readout in MPa)Integrated overpressure protection

Inline pressure regulators

Description

Defined reduction in operating pressure for ejectors, limitation of holdingforce of grippersPressure adjustment by means of knurled screwIntegrated overpressure protection

85 of 99

Inline pressure regulators

Description

Defined reduction in operating pressure for ejectors, limitation of holdingforce of grippersPressure adjustment by means of knurled screwIntegrated overpressure protection

Vacuum regulators 2

Description

Vacuum adjustment of consumer loads, such as suction cups in handlingsystemsIntegration of a vacuum gauge recommendedBlow-off is possible if vacuum gauge is not connectedAny installation position

86 of 99

Vacuum regulators with external leakage

Description

Setting a constant vacuum level when handling workpieces with varyingporosities or leakageSuitable as safety valve if dry-running rotary vane pumps are to runcontinuously at maximum vacuumControl of vacuum through automatic venting when a preset vacuum levelis reachedManual adjustment via fine thread, mechanical opening via spring load

Lifting cylinders – operated by compressedair

Description

Stacking and destacking of workpiecesVacuum generation by compressed air using an integrated ejectorLifting cylinder extended during idle stateCycle time independent of stroke and weight

Vacuum lifting cylinders – operated bycompressed air

Description

For flat suction picking, e.g. for suction cup series SFU-F Ø 4 – 15 mm


Vacuum lifting cylinders – operated bycompressed air 2

87 of 99

Description

For high suction picking, e.g. for series SFU-F Ø 20 – 40 mm


Angle arm – spring-loaded, rotatable,torsionally rigid

Description

Components for mounting grippers or gripper fingers via clampingelements to extrusionsTorsionally rigid spring-load compensates stroke when product is ejectedfrom sprue moldSecure clamping of gripper elements even under heavy load

Foam Vacuum Gripper

Description

Concept:

Pick up bags or other shrink wrapped productsCan be used for other type of single products covering the full gripperThick foam rim compensates with shape of products

88 of 99

Bag Handler

Description

Concept

-Pick up bags or other shrink wrapped products-Can be used for other type of single products covering the full gripper-Thick foam rim compensates with shape of products

Benefits

-Ready to use (vacuum source included)-Foam rim easy to change-Multi-zone operated automatically via check valves (optionnal if differentsizes need to be handled)

FlexiGrip

Description

Concept

-Foam vacuum cups to pick up all type of products without adjustment-Modular technologies for easy adjustment to your needs-Easy to retrofit existing equipment

Benefits

-Powered by internal vacuum cartridge or external blower-Can be connected together to save power and lower the cost-Rough, porous, twisted, uneven surfaces and bag can be picked up

Lumber Gripper

Description

Concept

-Unique design-Worldwide leader in the wood industry-Foam pattern to fit your application-Uneven surfaces-Gripping power remains constant with single parts or entire layers

Benefits

-Saving up to 50% of energy with the Wave System™ (internal checkvalves)-Easy and quick foam change-Low maintenance-Not sensitive to dust-No filter required

Palletizer Pro

Description

Concept

-Pick up all products (open top, shrink, wrap, etc…)

89 of 99

-Gripping power remains constant whether single parts or entire layers-Same tool for all products (slip sheets and pallets as well)-Different foam patterns to fit your applications-Uneven surfaces

Benefits

-Saving up to 50% of energy with the Wave System™ (internal checkvalves)-Low maintenance-Not sensitive to dust-No filter required-Adjustable internal components

Oval Suction Cups

Oval Suction Bumps Bellow

90 of 99

Tube Lifter FIPALIFT Basic

Tube Lifter FIPALIFT Expert

VarioFlex Suction Cups

Bag Handling Gripper

91 of 99

Plug & Pick

Description

Concept

-Gripping power remains constant whether single part or entire layer-Switch from products, to slip sheets, to pallets without any adjustment-Rugged and not affected by dust

Benefits

-Flush edge design for “carton in box” applications-Custom designs available for specific applications-Units are self contained

Palletizing Gripper

Description

92 of 99

Concept

Twisted and uneven products

Very economical compared with other tools

Vacuum source included (ejectors)

80% minimum coverage

Benefits

Ready to install (self-contained)Quick pick and releaseSimple to useLow maintenance

EcoPump AD

Portable Paint Equipment

93 of 99

TZ 10M

EcoDose 2 Electronic Dosing System 2k

94 of 99

Paints

Eco Gun ASO Auto Mini RSC Dsams

EcoGun AL Auto (651)

95 of 99

EcoPump HP

Agitator A Fix R PR 185 580

96 of 99

EcoPump VP

EcoGun AA 2100

97 of 99

EcoGun 249

EcoGun 910

Tel 03-5880 5277Fax 1700 810 291Mobile Phone 012-3230 637E-Mail [email protected] www.centricorp.com.my

Centricorp (M) Sdn. Bhd.

No. 20, Jalan MJ 15, Taman Industri Meranti Jaya, 47120, Puchong, Selangor,Malaysia

Facebookhttps://www.facebook.com/Centricorp-M-Sdn-Bhd-

498767586895977/

98 of 99

99 of 99

Documents

EcoBell2 SL Direct Charge - Amazon Web Services...EcoBell2 SL External Charge Description The high-speed rotating atomizer EcoBell2 SL EC is suitable for the electrostatic application