Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
DoP: 1001-CPR-2015/06/02 - Page 1 of 4
EC Declaration of Performance (DoP)
Kooltherm® FM Pipe Insulation Formatted in accordance with EN 14314:2009+A1:2013 and Regulation (EU) No 305/2011 - Article 7
Regulated Information
1. Unique identification code of the product-type
Kooltherm® FM Pipe Insulation (nominal 37 kg /m 3 density) - This DoP comprises all faced products manufactured and supplied by Kingspan. - This DoP comprises all shapes within in the scope of EN 14314:2009+A1:2013
2. Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11(4)
Order number
3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer
Rigid phenolic (PF) insulation, intended to be used as thermal insulation product for building equipment or industrial installations.
4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required pursuant to Article 11(5)
Kingspan Industrial Insulation Ltd Tel: Glossop Brook Road, Glossop SK13 8GP Fax: United Kingdom E-mail: [email protected]
5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2)
Not applicable
6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V
AVCP System 3
7. In case of the declaration of performance concerning a construction product covered by a harmonised standard
Notified testing laboratories No. 0751 and 0833 determined the production type under system AVCP System 3.
Forschungsinstitut fiir Warmeschutz Exova Warrington Fire Lochhamer Schlag 4 Holmesfield Road, Warrington 82166 Grafelfing WA1 2DS, United Kingdom Tel I Tel [ Fax I Notified Body number: 0751 Notified Body number: 0833
8. In case of the declaration of performance concerning a construction product for which a European Technical Assessment has been issued
Not applicable
© Kingspan, Kooltherm and the Lion Device are Registered T rademarks of Kingspan Group pic in the UK, Ireland and other countr ies. All rights reserved. Kingspan reserves the right to amend product speci f icat ions without prior not ice. All informat ion, technical detai ls and f ix ing instruct ions etc. included in this l i terature are given in good fa i th be veri f ied as to the suitability and compl iance with actual requirements, specif icat ions and any appl icable laws and regulat ions. For other appl icat ions or condi t ions of use, Kingspan opi[f sought for uses of Kingspan products that are not specif ically descr ibed herein. Please check that your copy o f t h e l i terature is current by contact ing the Market ing Department. Publ ished May 2015
uses descr ibed. R e c o m m s i d a t i o n s f o r use should nical Advisory Service the al lv ice of which should be
KIN00000543 0001 KIN00000543/1
DoP: 1001-CPR-2015/06/02 - Page 2 of 4
EC Declaration of Performance (DoP)
Kooltherm® FM Pipe Insulation Formatted in accordance with EN 14314:2009+A1:2013 and Regulation (EU) No 305/2011 - Article 7
9. Declared performance
Essential characteristics Performance Harmonised
technical
Remark Declaration specification
Reaction to fire Faced product B L - s l , d 0
Thermal resistance - Thermal conductivity - Thickness - Closed cell content
See X(T)-curve Thickness as specified on the label CV
Compressive strength CS(10/Y) 100 P O
o Water permeability NPD P O
o
Water vapour permeability - Water vapour transmission NPD I9
+A1:
Continuous glowing combustion NPD o
Release of corrosive substances NPD P O
Release of dangerous substances to the indoor environment
No harmonized test method available N/A LU
Durability of reaction to fire against heat, weathering, ageing / degradation
Reaction to fire does not change with time N/A
Durability of thermal resistance against ageing/degradation
- Maximum service temperature - Minimum service temperature
ST(+)+110 ST(-)-50
Remarks
The purpose of this document is compliance of the product declarations with the relevant European product standard EN 14314. Products within the scope of this product standard bear the CE mark as shown aside. The acronym 'NPD' (No Performance Determined) indicates that no performance is declared. For more elaborate technical details, the technical data sheets remain the primary source of information. This document is intended to complement, not replace the official Kingspan Technical Data Sheets.
Conformity
The performance of the product identified by the Product Description, is in conformity with the declared performance
Signed for and on behalf of the Manufacturer by:
Glossop, United Kingdom 02/06/2015
Philip J. Heath Business Unit Director, Kingspan Industrial Insulation Ltd
AP/25/[ ] 2
KIN00000543 0002 KIN00000543/2
DoP: 1001-CPR-2015/06/02 - Page 3 of 4
EC Declaration of Performance (DoP)
Kooltherm® FM Pipe Insulation Formatted in accordance with EN 14314:2009+A1:2013 and Regulation (EU) No 305/2011 - Article 7
Contacts
UK, Ireland & Gibraltar - Kingspan Industrial Insulation Ltd Pembridge, Leominster, Herefordshire, HR6 9LA, United Kingdom
Tel: | T e l ~ |
The rest of Europe (excluding Turkey, Malta & Cyprus) and Russia
Kingspan Insulation N.V. Visbeekstraat 24 B - 2300 Turnhout, Belgium Tel: |
Australasia, Oceania and SE Asia as far west and north as, and including, Myanmar, China, Mongolia and Japan
Kingspan Insulation Pty Ltd 266 Beringarra Ave, Malaga, WA 6090, Australia Tel: • Tel: •
Everywhere else excluding Canada, USA, Mexico, Bermuda, the Cayman Islands, Puerto Rico & St Pierre and Miquelon
PAL Middle East P IR LLC P.O. Box 113826, Dubai Investment Park 2, Dubai, U.A.E. Tel:
AP/25/[ ] 3
KIN00000543 0003 KIN00000543/3
DoP: 1001-CPR-2015/06/02 - Page 4 of 4
EC Declaration of Performance (DoP)
Kooltherm® FM Pipe Insulation Formatted in accordance with EN 14314:2009+A1:2013 and Regulation (EU) No 305/2011 - Article 7
Kingspan
0.045 -i
Thermal Conductivity Curve: Kooltherm® HVAC Declared Thermal Conductivity (Ad) in accordance with EN 14314
0.04
0.035
t 0.03
0.025
5 0.02 O
0.015
0.01
0.005
-50 -40 -30 -20 -10 0 10 20 30 40
Mean Insulation Temperature [°C] —>
50 60 70 80 90 100
AP/25/[ ] 4
KIN
00000543/4