EazyDeck Alu - B+M Steel · psubstrate to EN ISO 6272 / ASTM D2794 • Bend test - on 5mm mandrel to ensure adhesion after bending to EN ISO 1519 • Machu Test (accelerated corrosion

B+M Architectural Specialists in architectural glass systems

EazyDeck AluDecking for safe + modern architecture

USES INCLUDE:Balconies • Walkways

Bridges • Steps Commercial dining areas

Temporary platforms

2

(COVER PHOTO) EASYDECK IS IDEAL FOR HIGH RISE FLATS THAT EXCEED 18 METRES

Product Selector 5-7Balcony Board MAX 10-11Balcony Board LITE 12-13Balcony Board Drainage Channel 14-15Triple Bolt Channel 16The Super Joist 18The Low Joist 20Spanning Capabilities 21Interlocking Board 22Slip Resistant Deck Board 23Adjustable Pedestal 24Nosing Profile 25Fire Testing 26

Products include: PageIntroducing the world’s first, Patent pending, Slip Resistant, Non Combustible, Fire Resistant Decking system from EazyDeck.

This brand new all-encompassing deck system has been designed with speed of installation, aesthetics, durability and longevity in mind.

EAZYDECK ALUSYSTEM

An introduction to the

EASYDECK MAX-R BALCONY BOARD

EASYDECK LITE-R BALCONY BOARD

EASYDECK INTERLOCKING BOARD

EAZYDECK SLIP RESISTANT BOARD

THE UK’S NO. 1 FULLY COMPLIANT ALUMINIUM FIRE RESISTANT DECKING SOLUTION

3

4

WHICHEAZYDECK ALU?Balcony Board LITE-R

3.6m, 4m & 6m Length

Article Length Colour

1022036-SG 3.6 Silver/Grey



1022036-SD 3.6 Sand

1022040-SD 4.0 Sand

1022060-SD 6.0 Sand

495mm Span on 4kN load 1mm expansion gap every 3m

Balcony Board LITE-F

6m Length

Article Colour

1052060-SG Silver/Grey

1052060-SD Sand


Balcony Board MAX-R

3.6m, 4m & 6m Length

Article Colour




1023036-SD 3.6 Sand

1023040-SD 4.0 Sand

1023060-SD 6.0 Sand


End Covers

Article Profile Colour

10420-SG LITE Silver/Grey

10420-SD LITE Sand

10430-SG MAX Silver/Grey

10430-SD MAX Sand

Balcony Board MAX-F

6m Length

Article Colour


1053060-SD Sand


END COVER PLATE

STAINLESS STEEL MACHINE SCREWS

TOP FIX IN COVER

‘RAISED’GRIP SURFACE

120mm

20mm

120mm

30mm

Dimensions

Construction

Maintenance

Warranty

120mm

20mm

TEXTURED SAND

TEXTURED SILVER GREY

The Ali-Deck Aluminium decking boards are 50% quicker to install compared to other decking systems on the market. These boards are fixed from the top down so required no fancy, fiddly fixings. It can also span 495mm between joists on a 4KN loading. Specific loading specifications are available on request. Full installation videos and installation guides are available on www.alideck.co.uk.

The boards are constructed completely from 100% aluminium (6063 T6 grade), up to 30% of which has been recycled to make these boards eco-friendly and much better for the environment.

Due to the fact that Ali-Deck is aluminium and finished using the 5 stage Qualicoat system, little or no maintenance is required. General grime can be removed simply with a damp, lint free cloth or mop with warm soapy water.

The decking is supplied with a 10 year warranty against splitting, cracking, warping, splintering, rotting, twisting and material or manufacturing defects. It has a minimum 50 year life expectancy.

INDIVIDUAL BOARDS:Length: 6 metresWidth: 120mmDepth: 20mm

The boards can be cut to size along both the length and width

Maximum Overall Decking Area: UnlimitedAllowable Span: 495mm on 4kN load

Colour Options

The decking boards are available in two colours as shown to the right; textured silver grey and textured sand. Other colours are available on request.

The boards can be supplied without a powder coated finish to achieve the A1 fire rating and would therefore be a natural aluminium colour and appearance.

Installation

Protective Finish

• Fire resistant: A2 - s1, d0 when coated• Slip resistance in the dry – 59 PTV• Slip resistant in the wet – 39.5 PTV• The weight of the standard balcony board including the clip in cover is 1.58 kg per linear M• Coating thickness - 60-80 microns • Impact test - with an energy of 2.5Km to ensure that the coating adheres to the substrate to EN ISO 6272 / ASTM D2794• Bend test - on 5mm mandrel to ensure adhesion after bending to EN ISO 1519• Machu Test (accelerated corrosion test) - in a solution made up of sodium chloride acetic acid and hydrogen peroxide at 37degreees C Duration 48 hours• Qualicoat 2.4.1. - cross hatch cuts are made at 2mm spacings with one being at 90 degrees to the other cut, tape is the applied left for 2 minutes and removed to check for adhesion of paint (EN ISO 2409 2013) • Qualicoat 2.18 - sawing and drilling test to ensure no flaking after cutting (using sharp tools) • Acid salt spray test - ISO 9227• EN ISO 3231 - Resistance to humid atmospheres containing Sulphur Dioxide• EN ISO 11341 - Accelerated weathering test• EN ISO 20810 - Natural weathering test (Florida Test) (Carried out on Powder Type)• EN ISO 12206-1 - Resistance to mortar (Carried out on powder type)• EN ISO 6270 – 2 - Constant climate condensation water test.• Choice of colour - Available in two colours; Textured Silver Grey & Textured Sand as shown opposite. Other colours are available on request.

The planks are coloured using the Qualicoat powder coating finish. Qualicoat is a quality label organisation committed to maintaining and promoting the quality of coating on aluminium and its alloys for architectural applications.

ALL ALUMINIUM

HEAT RESISTANT

DURABLETEXTURED FINISH

LOWMAINTENANCE

RECYCLABLE STABLE IN ALL WEATHER

CONDITIONS

A2 FIRE RATED

ProductSpecification

Aluminium Decking

Rochester Airport Trading Estate27 Laker RoadRochesterKent ME1 3QX

Tel: 01622 235 672Email: [email protected]

Dimensions

Construction

Maintenance

Warranty

120mm

30mm

TEXTURED SAND


The Ali-Deck aluminium decking boards are 50% quicker to install compared to other decking systems on the market. This is because you only need to install the Ali-Deck Supa Joists or support system up to every 1.2 metres on a 4kN loading, whereas most other decking systems require joists every 400mm. Full installation videos and installation guides are available on www.alideck.co.uk.







Colour Options



Installation

Protective Finish



ALL ALUMINIUM

HEAT RESISTANT


LOWMAINTENANCE


CONDITIONS

A2 FIRE RATED


Aluminium Decking



SENIOR BALCONY FLAT BOARD

Ali-Deck

balconies, the Ali-Deck Senior Balcony Flat board has been designed with 4 main features in mind.

Specification Datasheet

1 FIRE RESISTANCE

3 DRAINAGE

2 INSTALLATION

4 AESTHETICS

The boards are manufactured completely from

combustible to A2 - s1, d0 when coated.

They can also be spaced to allow for varying drainage requirements (unlike any other system).

Speed and ease of installation are key to any project, so we have designed a board that has a unique invisible (structural) top clip system which can be installed from the top down. The board can also be trimmed down the length to match any projection of balcony and still be structurally stable across the whole plank.

designed to look like decking but not to feel like aluminium.

Specification Datasheet

1 FIRE RESISTANCE

3 DRAINAGE

2 INSTALLATION

4 AESTHETICS

The boards are manufactured completely from

combustible to A2 - s1, d0 when coated.

They can also be spaced to allow for varying drainage requirements (unlike any other system).

Speed and ease of installation are key to any project, so we have designed a board that has a unique invisible (structural) top clip system which can be installed from the top down. The board can also be trimmed down the length to match any projection of balcony and still be structurally stable across the whole plank.

designed to look like decking but not to feel like aluminium.

JUNIOR BALCONY FLAT BOARD

Ali-Deck

balconies, the Ali-Deck Junior Balcony Flat board has been designed with 4 main features in mind.

‘FLAT’ SURFACE

SEE PAGE12

FOR DETAILS SEE PAGE10

FOR DETAILS

SEE PAGE12

FOR DETAILS

SEE PAGE10

FOR DETAILS

5

FITS TO THE SUPER JOIST AND BALCONY BOARD

TEXTURED SURFACE

BALCONY BOARD

DRAINAGE CHANNEL

Specification DatasheetBALCONY

BOARD DRAINAGE CHANNEL

Ali-Deck

from the top surface of balconies, decking platforms and walkways.

This discrete extrusion is installed between the balcony boards to aid with drainage and

Drainage Channel

6m Length

Article Fitment Depth mm

107260-SG LITE Silver/Grey

107260-SD LITE Sand

1072060-SG MAX Silver/Grey

1073060-SD MAX Sand

32mm

28mm

32mm

18mm

Designed to aid in drainage from the top surface of balconies, decking platforms and walkways.

Aspecificdrainagechannelhelpstocarrywaterawayfromthedeckingtoaspecificarearatherthaneithersittingonthesurface or draining underneath causing structural damage.

Nosing Profile

6m Length

Article Colour


10980060-SD Sand

80m

m40mm

CURVED NOSING

The EazyDeck Alu Nosing Extrusion has been designed to work in conjunction with all other EazyDeck Alu extrusions. When used with two of our deck boards it is commercially compliant for treadspecification.(280mm)

Triple Bolt Channel 6m Length

Article Length

103486-MF 6m

CHANNEL

M8 STAINLESS STEEL BOLTS

48.5mm

10mm

SEE PAGE14

FOR DETAILS

SEE PAGE16

FOR DETAILS

SEE PAGE25

FOR DETAILS

6

Adjustable Pedestal

Variable heights

Article H mm

1107090 70 - 90

11090120 90 - 120

110120165 120 - 165

110165235 165 - 235

110235300 235 - 300

Height(H)ismeasuredfromthefloorto the under side of the joist.

Low Joist

6m Length

Article Length


1115060-SD Sand

Super Joist

6m Length

Article Length


11210560-SD Sand

EASY FIX BASE SUPPORT

THREAD HEIGHT ADJUSTER

REMOVABLE ADJUSTER TOOL

EASY FIX SUPPORT HEAD

LOW JOIST (50mm - 80mm)

H

10.8mm

120mm

50mm

80mm

105mm

80mm

120mm

30mm

END COVER PLATE


SLIP RESISTANT INSERTS

Slip Resistant Board

6m Length

Article Colour


1133060-SD Sand

Interlocking Board

6m Length

Article Colour


1083060-SD Sand

120mm

30mm

END COVER PLATE

TEXTURED FINISH

SEE PAGE24

FOR DETAILS

SEE PAGE20

FOR DETAILS

SEE PAGE18

FOR DETAILS

SEE PAGE22

FOR DETAILS

SEE PAGE23

FOR DETAILS

7

EAZYDECK INTERLOCKING DECK BOARD

What makes this a quick fit option?We do not use fiddly brackets with fancy fixings to screw the boards into place!

Because EazyDeck is aluminium you do not have to worry about troublesome expansion of wooden or plastic deck boards…We simply fix through theEazyDeck Interlocking board to give a much quicker fixing through to the substrate and at the same time avoid hidden costs of brackets and difficult to use fixings. We do not use bang on end caps that fall off when they expand or contract in the sun, we only use mechanically fixed aluminium end caps that last!

EAZYDECK SLIP RESISTANT BOARD

This patented decking is Slip Resistant and has a durable rubber/composite insert to prevent you or the public from unnecessary slips. The inbuilt anti slip insert means this is perfect for any commercial or domestic application.Use the full system and realise the potential of super fast installation and safety benefits of this patented system!When you combine the EazyDeck SuperJoist with the EazyDeck Slip Resistant Deck Board you will not believe how fast you can install a complete long lasting revolutionary decking system that is built to last!

The benefits of Aluminium speak for themselves, these engineered solutions have been specifically designed for platforms and balconies of all kinds. By choosing the EazyDeck range of products you will be able to install decking platforms that last and in record time…This is mainly due to the spanning capabilities of aluminium when designed specifically for these applications. And also due to the 50 years of experience we have in extrusion design…. With traditional decking solutions, you would typically require a joist at 400mm centres, one of the benefits of the all new EazyDeck System when combined with the EazyDeck Super Joist is that you would only require a joist at every 1200mm to 1900mm apart (depending on loadings required), that’s a 50% time saving on the underside before you even get to the important part!

These engineered solutions have been designed to cut down the length and still be structurally stable for point load, they create a free draining platform with spaces between the boards and have a unique top down fixing clip which makes them super fast to install.

EAZYDECK ALU?Why

The Balcony MAX and Balcony LITE Boards

8

The EazyDeck system uses a powdercoatprocess called QUALICOAT: Qualicoat isa quality label organisation committed tomaintaining and promoting the quality ofcoating on aluminium and its alloys forarchitectural applications.

BS 6496:1984: Specification for powderorganic coatings for application andstoving to aluminium alloy extrusions,sheet and preformed sections forexternal architectural purposes, and forthe finish on aluminium alloy extrusions.

EazyDeck extrusions are finished using thefollowing EN standards:

EN 12206-1:2004: Paints and varnishes.Coating of aluminium and aluminiumalloys for architectural purposes. Coatingsprepared from coating powder

EN ISO 2409:2013: Paints and Varnishes,Cross Cut Test.

Our quality department also perform thefollowing tests on our powder coatedprofiles.

QUALICOAT 2.1: Visual inspection at3 metres for internal and 5 metres forexternal extrusions (Our Inspectorsvisually inspect at 1 metre as standard)

QUALICOAT 2.2: Gloss level check towithin 5% +/- of the manufacturer’sstated level. [EN ISO 2813]

QUALICOAT 2.4.1: Cross Hatch cuts aremade at 2mm spacing with one being at90° to the other cut, tape is then applied,left for 2 minutes and removed to checkfor adhesion of paint. [EN ISO 2409 2013]

QUALICOAT 2.3: Thickness checks to seethat the material is coated with at least60 microns of powder, average. [EN ISO2360]

QUALICOAT 2.6: Cupping test is carriedout to check for adhesion with thesubstrate [EN ISO 1520]

QUALICOAT 2.8: Impact test with anenergy of 2.5Nm to ensure that thecoating adheres to the substrate [EN ISO6272 / ASTM D2794]

QUALICOAT 2.7: Bend test on a 5mmMandrel to ensure adhesion after bending[EN ISO 1519]

QUALICOAT 2.11: Machu test (Acceleratedcorrosion test) in a solution made upof Sodium Chloride, Acetic Acid andHydrogen Peroxide at 37°C. Duration 48hours

QUALICOAT 2.14: Polymerisation test(Wipe with MEK for 30 seconds)

QUALICOAT 2.16: Resistance to boilingwater in a pressure cooker. Duration 1hour 100Kpa

QUALICOAT 2.18: Sawing and drillingto ensure that there is no flaking aftercutting (using sharp tools)

Curing Oven temperatures are checkedand recorded on a daily basis Externalchecks carried out by the powdersuppliers and our Laboratory in Belgiumon random samples of extrusion:

ISO9227: Acetic Acid Salt Spray Test

EN ISO 3231: Resistance to humidatmospheres containing Sulphur Dioxide

EN ISO 11341: Accelerated weathering test

EN ISO 2810: Natural weathering test(Florida Test). (Carried out on Powdertype)

EN ISO 12206-1: Resistance to mortar(Carried out on Powder type)

EN ISO 6270-2: Constant ClimateCondensation Water test

Our aluminium is sent through a varietyof pre-treatment chemical baths thatremove a very fine layer off the surfacebefore powder coating.

The decking is supplied with a 10 year warranty against splitting, cracking, warping, splintering, rotting, twisting and material or manufacturing defects. It has a minimum 50 year life expectancy

EazyDeck Alu uses Qualicoat

TEXTURED SAND


If you are interested in receiving an EazyDeck sample box please contact us on 0114 254 3226 or email: [email protected]

The decking boards are available in two colours as shown above; textured silver grey and textured sand. Other colours are available on request. Minimum quantities might apply.

9

M8 BOLTS

TRIPLE BOLT CHANNEL

TOP FIX IN COVER

TOP FIX ALI DECK BALCONY BOARD

5MM GAP

10

BALCONY BOARDMAX

The EazyDeck Alu

FIRE RESISTANT BALCONY SOLUTION

The EazyDeck MAX Balcony board is an engineered solution specifically for balcony installations, it is 120mm wide and 30mm deep it has the following features:

• The ability to cut it to the correct width

• It is fire resistant to A2, s1, d0

• You can install 90% of the deck board prior to the installation of the balcony if required, once the balcony is installed you can then install the remaining boards

• The ability to be installed on to existing sub frame sections without having to drill additional holes

• Drainage between the boards

• 1200mm Span on 4kN load

Balcony Board MAX is designed specifically for installation on balconies. Strong aluminium construction and durable Qualicoat finish ensures a low maintenance surface which is quick and easy to install. Fire resistance, these deck boards are manufactured from structural gradeT6 (6063) aluminium, and combined with a special textured slip resistant coating they achieve a fire rating of A2, s1, d0 and have been independently tested to EN 13501, EN 13823 and EN ISO 1716.


Capping strips ensure any securing bolts are well concealed. The addition of the specifically designed Balcony Board Drainage Channel redistributes any unwanted standing water away from the decked area.

Available in two modern colours Textured Silver /Grey or Textured Sand. The Balcony Board system will suit any balcony area.

Also manufactured in two surface options: The attractive and slip resistant ‘raised’ (R) surface, and the more comfortable ‘Flat’ (F) grip surface ideal for sun terraces.

Available in 3.6, 4 and 6m lengths1mm expansion gap every 3m

120mm 120mm

30mm 30mm

Dimensions

Benefits include:ALL ALUMINIUM

LOW THERMAL CONDUCTIVITY


LOWMAINTENANCE

RECYCLABLE

STABLE IN ALL WEATHER CONDITIONS

A2 FIRE RATED

QUICK AND EASYTO INSTALL

Dimensions

Construction

Maintenance

Warranty

120mm

30mm

TEXTURED SAND


The Ali-Deck aluminium decking boards are 50% quicker to install compared to other decking systems on the market. This is because you only need to install the Ali-Deck Supa Joists or support system up to every 1.2 metres on a 4kN loading, whereas most other decking systems require joists every 400mm. Full installation videos and installation guides are available on www.alideck.co.uk.







Colour Options



Installation

Protective Finish



ALL ALUMINIUM

HEAT RESISTANT


LOWMAINTENANCE


CONDITIONS

A2 FIRE RATED


Aluminium Decking



BALCONY BOARD MAX-R BALCONY BOARD MAX-F

11

The EazyDeck LITE Balcony board is an engineered solution specifically for balcony installations, it is 120mm wide and 20mm deep it has the following features:

BALCONY BOARDLITE

The EazyDeck Alu

• The ability to cut it to the correct width



• The ability to be installed on to existing sub frame sections without having to drill additional holes

• Drainage between the boards

• 495mm Span on 4kN load

Like the Balcony Board MAX the LITE rance is designed specifically for installation on balconies. Strong aluminium construction and durable Qualicoat finish ensures a low maintenance surface which is quick and easy to install. With the benefit of being only 20mm thick, it’s the ideal solution for where installations space is at a premium. Fire resistance, these deck boards are manufactured from structural gradeT6 (6063) aluminium, and combined with a special textured slip resistant coating they achieve a fire rating of A2, s1, d0 and have been independently tested to EN 13501, EN 13823 and EN ISO 1716.


Capping strips ensure any securing bolts are well concealed. The addition of the specifically designed Balcony Board Drainage Channel redistributes any unwanted standing water away from the decked area.

Available in two modern colours Textured Silver /Grey or Textured Sand. The Balcony Board system will suit any balcony area.

Also manufactured in two surface options: The attractive and slip resistant ‘raised’ (R) surface, and the more comfortable ‘Flat’ (F) grip surface ideal for sun terraces.

Available in 3.6, 4 and 6m lengths1mm expansion gap every 3m

Dimensions




LOWMAINTENANCE

RECYCLABLE


A2 FIRE RATED

120mm

20mm

120mm

20mm


Dimensions

Construction

Maintenance

Warranty

120mm

20mm

TEXTURED SAND


The Ali-Deck Aluminium decking boards are 50% quicker to install compared to other decking systems on the market. These boards are fixed from the top down so required no fancy, fiddly fixings. It can also span 495mm between joists on a 4KN loading. Specific loading specifications are available on request. Full installation videos and installation guides are available on www.alideck.co.uk.







Colour Options



Installation

Protective Finish



ALL ALUMINIUM

HEAT RESISTANT


LOWMAINTENANCE


CONDITIONS

A2 FIRE RATED


Aluminium Decking



BALCONY BOARD LITE-R BALCONY BOARD LITE-F

12

END COVER PLATE


TOP FIX IN COVER

FIRE RATED A2, s1, d0

WHEN COATED

13

BALCONY BOARD

DRAINAGE CHANNEL

Specification DatasheetBALCONY

BOARD DRAINAGE CHANNEL

Ali-Deck

from the top surface of balconies, decking platforms and walkways.

This discrete extrusion is installed between the balcony boards to aid with drainage and

14

Specifically designed to aid in drainage from the top surface of balconies, decking platforms and walkways. Available for both the Balcony Board MAX and the Balcony Board LITE.

BALCONY BOARDDRAINAGE CHANNEL

The EazyDeck Alu

• Enables effective moisture management, draining water away from the surface of the decking

• Prevents damp soaking under decking



• Easy to cut to desired length

This discrete extrusion is installed between the balcony boards to aid with drainage and reduce the flow of water between the boards, available for the 20mm (LITE) & 30mm (MAX) balcony boards, it may reduce the need for expensive soffit claddings on balconies.

We have designed this system to have the ability to cut down the length and still be structurally stable under point load.

The deck channel is manufactured from structural grade T6 (6063) aluminium, and combined with a special textured slip resistant coating they achieve a fire rating of A2, s1, d0 and have been independently tested to EN 13501, EN 13823 and EN ISO 1716.

The Drainage Channels are available in two colours as shown to the right; textured silver grey and textured sand. Other colours are available on request.The Channels can be supplied without a powder coated be a natural aluminium colour and appearance.

The channels are coloured using the Qualicoat powder coated finish. Qualicoat is a quality label organisation committed to maintaining and promoting the quality of coating on aluminium and its alloys for architectural applications. • Assembling 90% of the deck boards

prior to the installation of the balcony means you would spend less time on site. The board is designed to be installed from the top, with a “Slotted” machined centre section, this is designed to enable us to pick up on at least one of the bolt channels in the 3 way bolt channel to remove the need for on-site drilling. You can then drop the deck board into place once the balcony is installed using the bolt channels and the threads facing up and simply apply the nuts and tighten up.

Drainage Channels are supplied with a 10 year warranty against splitting, cracking, warping, splintering, rotting, twisting and material or manufacturing defects. It has a minimum 50 year life expectancy.

Dimensions



LOWMAINTENANCE

PREVENTS SURFACE WATER AND SLIP HAZARDS

RECYCLABLE


A2 FIRE RATED


32mm

28mm

32mm

18mm

CHANNEL TO FITBALCONY BOARD MAX

CHANNEL TO FITBALCONY BOARD LITE

15

The Triple Bolt channel has been designed to be used in conjunction with our MAX Balcony or LITE Balcony deck boards to give you the ability to install deck platforms in record time, without the need for drilling the steel balcony every time you install a deck board. Meaning super fast installation time.

TRIPLE BOLTCHANNEL

The EazyDeck Alu

Benefits include:

ALL ALUMINIUM



LOWMAINTENANCE

RECYCLABLE


A2 FIRE RATED

6063 T6 STRUCTURAL GRADE ALUMINIUM

CHANNEL

M8 STAINLESS STEEL BOLTS


WHEN COATED

50mm

10mm

Dimensions

16

17

The EazyDeck Super-Joist is an integral part of the EazyDeck System! This clever extrusion is designed to act as both a support post and big span joist. The connection plates allow for super fast installation and can be adjusted to suit most applications and conditions. It has also been designed to be connected together to give additional strength for applications where larger spans are required.

SUPER JOISTThe EazyDeck Alu

Benefits include: DimensionsINCREASED SPAN CAPABILITIES

AGAINST TIMBER OR COMPOSITE OPTIONS BY OVER 300%

ALL ALUMINIUM


COLOUR MATCHEDTO THE DECK BOARDS

LOWMAINTENANCE

RECYCLABLE


Decking Joist Spans

105mm

80mm

DOMESTIC Joist Component Disposition

STANDARD SPECIFICATION 1/350 FIRM SPECIFICATION 1/480 LOAD 1.5kN SQM 600 1000 1200 1500 2000 JOIST SPANS - BETWEEN SUPPORTS

SINGLE JOIST STANDARD specification: 3600 3100 3000 2700 2500 SINGLE JOIST FIRM specification: 3200 2800 2700 2500 2300

DOUBLE JOIST STANDARD specification: 5000 4200 4000 3800 3400 DOUBLE JOIST FIRM specification: 4500 3800 3600 3400 3100

CENTRE LINE OF JOIST

COMMERCIAL Joist Component Disposition

STANDARD SPECIFICATION 1/350 FIRM SPECIFICATION 1/480 LOAD 4.0kN SQM 600 1000 1200 1500 2000 JOIST SPANS - BETWEEN SUPPORTS

SINGLE JOIST STANDARD specification: 2600 2300 2200 2000 1800 SINGLE JOIST FIRM specification: 2400 2100 2000 1800 1700 DOUBLE JOIST STANDARD specification: 3600 3100 3000 2800 2500 DOUBLE JOIST FIRM specification: 3300 2800 2700 2500 2300


END COVER PLATE

STAINLESS STEEL MACHINE

SCREWS

SUPER JOIST

FIRE RATED

A2, s1, d0

18

19

DOMESTIC Joist Component Disposition

STANDARD SPECIFICATION 1/350 FIRM SPECIFIC ATION 1/480 LOAD 1.5kN SQM 600 1000 1200 JOIST SPANS - BETWEEN SUPPORTS

STANDARD specification: 1640 1385 1304FIRM specification: 1480 1247 1174


COMMERCIAL Joist Component Disposition

STANDARD SPECIFICATION 1/350 FIRM SPECIFICATION 1/480 LOAD 5.0kN SQM 600 1000 1200 JOIST SPANS - BETWEEN SUPPORTS

STANDARD specification: 1100 928 873FIRM specification: 990 835 785


The EazyDeck Low Joist is an integral part of the EazyDeck System! This extrusion is designed to act a support and joist for the LITE and big span balcony board specifically on concrete balconies and terrace areas that require adjustable heights. This joist in designed to work in conjunction with the EazyDeck adjustable pedestal and the rest of the EazyDeck deck board range.

LOW JOISTThe EazyDeck Alu

Benefits include: DimensionsINCREASED SPAN CAPABILITIES

AGAINST TIMBER OR COMPOSITE OPTIONS BY OVER 300%

ALL ALUMINIUM


COLOUR MATCHEDTO THE DECK BOARDS

LOWMAINTENANCE

RECYCLABLE


Decking Joist Spans

50mm

80mm


END COVER PLATE

LOW JOIST

FIRE RATED

A2, s1, d0

20

SPANNINGCAPABILITIESand technical informationDOMESTIC APPLICATION

The Interlocking EazyDeck board issuitable for everyday use. It will spanbetween the EazyDeck Super Joist up toa maximum span of 1900 mm (based1/350 deflection criteria and a loadingof 1.5 kN/m2).

If a firm specification is required youcan span a maximum of 1700 mmbetween the EazyDeck Super Joist (based1/480 deflection criteria and a loadingof 1.5 kN/m2).

The EazyDeck Super Joist Spans usingthe 8.0 mm L brackets:

The EazyDeck Super Joist is capable ofspanning a maximum span of 3000mm between upright ground supports(based 1/350 deflection criteria and aloading of 1.5 kN/m2).

If a firm specification is required the EazyDeck Super Joist will span 2700 (based1/480 deflection criteria and a loadingof 1.5 kN/m2).

The EazyDeck Super Joist Spans usingthe flat T and L brackets (both sides):


If a firm specification is required the EazyDeck Super Joist will span 2500 (based 1/480 deflection criteria and a loading of 1.5 kN/m2).

COMMERCIAL APPLICATION

EazyDeck boards are suitable forcommercial use. It will span betweenthe EazyDeck Super Joist up to amaximum allowable span of 1350 mm(based 1/350 deflection criteria and aloading of 5.0 kN/m2).

If a firm specification is required youcan span a maximum of 1200mmbetween the EazyDeck Super Joist (based1/480 deflection criteria and a loadingof 5.0 kN/m2).

The EazyDeck Super Joist Spans usingthe 8.0 mm L brackets:


If a firm specification is required the EazyDeck Super Joist will span 2000 (based1/480 deflection criteria and a loadingof 5.0 kN/m2).

Due to the fact that the EazyDeck system is aluminium and is coated using the 5 stage Qualicoat system, little or no maintenance is required. All you need to do is remove any excess dirt or grime and with a brush and mop clean.

MAINTENANCE

21

The Interlocking EazyDeck is a quick-to-install all aluminium decking system that can be installed 50% quicker than other decking systems on the market. As this product is made entirely from aluminium, so you do not need to treat it every so often with harsh chemicals as you would with timber decking because it will not rot over time. It is also made from 30% recycled aluminium, and it is 100% recyclable again and again, making it extremely environmentally friendly.

INTERLOCKING BOARD

The EazyDeck Alu

Benefits include:

ALL ALUMINIUM



LOWMAINTENANCE

RECYCLABLE


NO GAPS BETWEEN BOARDS

A2 FIRE RATED

Dimensions120mm

30mm

The aluminium construction makes this a fully fire resistant deck-ing solution. The untreated boards have an A1 rating which is the best fire rating possible. Boards that are treated with a durable powder coating to colour the boards, are rated A2, s1, d0 which is the second best possible fire rating, both options have no contri-bution to fire.

Interlocking EazyDeck aluminium decking is supplied with a 10 year warranty and a 50 year life expectancy for peace of mind that your new decking system will last for many years to come.

CITYSCAPE BALCONY USING EAZYDECK BALCONY BOARD IN TEXTURED SILVER / GREY

END COVER PLATE


TEXTURED FINISH


WHEN COATED

22

This revolutionary Slip Resistant Deck board has been designed to provide a safe and durable solutionto both commercial and domestic applications. Traditionally this market is flooded with bothcomposite and timber offerings, both of which have been known to cause accidents and injuriesmainly due to lack of maintenance. The Slip Resistant Deck board has been designed to be installed inconjunction with the EazyDeck Super Joist (see page 18) which makes the system far quicker to installand gives longevity.

SLIP RESISTANT BOARDThe EazyDeck Alu

Benefits include:

SLIP RESISTANT

ALL ALUMINIUM



LOWMAINTENANCE

RECYCLABLE


NO GAPS BETWEEN BOARDS

CLASS B FIRE RATED

LEFT IMAGE: MODERN DECKING AREA USING EAZYDECK SLIP RESISTANT BOARD IN TEXTURED SAND

This is the only Aluminium Slip Resistant system on the market. EazyDeck does not need an expansion gap between boards due to the fact that aluminium is far more stable than other decking

solutions, it’s perfect for dining areas in both commercial and domestic applications, there is no possibility of food or debris getting between the boards, which can attract unwanted vermin.

120mm

30mm

Dimensions

END COVER PLATE


SLIP RESISTANT INSERTS

FIRE RATED

CLASS B

23

The EazyDeck adjustable pedestal is a solution driven product, specifically designed for installations where it is key that non-combustible products are installed, this A1 fire rated product is manufactured from 3 aluminium extrusions, which makes it cost effective and quick to install. It works seamlessly with all of the products in our range and gives you the adjustment that is required.

ADJUSTABLEPEDESTAL

The EazyDeck Alu

Dimensions

WIDE SUPPORT BASE WITH HOLES ALLOWING FOR SURFACE FIXING IF REQUIRED

EASY FIX BASE SUPPORT

THREAD HEIGHT ADJUSTER

REMOVEABLE ADJUSTER TOOL

EASY FIX SUPPORT HEAD

LOW JOIST (50mm - 80mm)

235m

m

165m

m

120m

m

90m

m

70m

m

235 TO 300mmFrom floor to underside of joist





JOIST

50mm10.8mm

80mm

120mm

FIRE RATED

CLASS A1

Additional Bespoke Sizes Available On Request

Code: ADP 235-300 Code: ADP 165-235 Code: ADP 120-165 Code: ADP 90-120 Code: ADP 70-90

24

The EazyDeck Nosing Extrusion has been designed to work in conjunction with all other EazyDeck extrusions. When used with two of our deck boards it is commercially compliant for tread specification. (280mm)

NOSING PROFILEThe EazyDeck Alu

Benefits include:

Dimensions

ALL ALUMINIUM



LOWMAINTENANCE

RECYCLABLE


A1 FIRE RATED

80m

m

40mm

FITS TO THE SUPER JOIST AND BALCONY BOARDCURVED NOSING

TEXTURED SURFACE

DECK BOARD

NOSING

SUPER JOISTANGLE BRACKETS

The Nosing Profiles are modular and work with the EazyDeck Interlocking Board, Slip Resistant Board, MAX Balcony Board, LITE Balcony Board and Super & Low Joists.

FIRE RATED

CLASS A1

25

Aluminium in Building:In December 2018 the government introduced new legislation in England and Wales to ban combus-tible materials in the cladding and balcony elements of new builds over 18 metres high. Balconies are, for the first time, counted as part of the external wall; classified as a “specified attachment”.

The EazyDeck System has been independently tested to EN 13823, EN 13501 and EN ISO 1716 and achieves A2, s1, d0 which makes the EazyDeck systems fully compliant.

FIRE TESTINGfor the EazyDeck Alu System

Qualicoat Powder Coat Process 1. BS476

London Underground Approval

Fire Data Sheet For the EazyDeck Insert

British Standard 476 refers to fire tests on building materials and structures. The parts of this standard that are of most relevance to powder coatings are Parts 6 and 7.

Part 6 - Fire PropagationThe result of this test is a fire propagation index. It is a measure of the contribution to fire growth made by an essentially flat surface. The results of the test are specific to the test specimen i.e. the product onthat particular substrate in the form in which it was tested. Therefore it cannot be used as a method for assessing the product in all situations.

Part 7 - Surface Spread of FlameThis is a method of measuring flame spread along the surface of a specimen. Again the results of the test are specific to the test specimen i.e. the product on that particular substrate in the form in which it was tested. Therefore it cannot be used as a method for assessing the product in all situations.

As defined in the UK Building Regulations 2000 - Fire Safety Approved Document B, the highest product performance classification for wall or ceiling linings is Class 0. This is achieved if a material;

(a) Achieves a class 1 rating in BS476 Part 7,

and (b) Achieves a fire propagation index of not more than 12 and sub-index of not more than 6 in BS476 Part 6.

Test ResultsInterpon D1000 series and D2000 Series have been tested to BS476 Parts 6 and 7 and have met the criteria for Class 0 building regulation approval.

• Smoke Emission• Toxic Fume Emission• Qualitative analysis (what is emitted)• Quantitative analysis (how much is emitted)• Flammability• Fire propagation• Surface spread of flame

EazyDeck Slip Resistant Inserts are made from PVC Polymers, they are generally referred to as “Self-Extinguishing” which means that they will burn whilst a high enough heat source of flame is applied to them but once removed they stop burning.

26

Our Recycled Aluminium Decking products will naturally bemore environmentally friendly than other decking productslike timber and composite.

EazyDeck Alu will last a lot longer thantimber or composite.

ENVIRONMENT

FAQ’S

The

EazyDeck will last a lot longer thantimber or composite, reducing theneed to be replaced as often, thereis also no need to maintain the surfaceof EazyDeck, unlike Wooden Decking forexample.

Wooden decking is often treated withenvironmentally harmful chemicalsthat are used as a preservative, or as amethod of applying an anti-slip coating.

Some people of course do not use anychemicals to preserve their woodendecking, but in those cases it is oftenseen that the decking surface andsubframe is often replaced more oftendue to natural weathering, which willnot be the case for EazyDeck.

Composite decking has becomepopular in the past, but is not generallyrecyclable due its composite make upof wood, plastic and additives.

1. Does EazyDeck warp? No, it’s completely made from Aluminium and so does not expand or contract anywhere near the same as composite or timber decking.

2. Is it quick to install? Yes, with the Super Joist it is 50% quicker to install than any other deck.

3. Does it require maintenance like timber decking? No, it is powder-coated and is not porous and does not expand or contracts like timber so the coating lasts for a minimum of 5 years in high traffic areas and 10 years in normal areas…expected life 25 years.

4. Can I recycle it? Yes, it is 100% recyclable.

5. Does it get hot in direct sunlight? As the system is aluminium it dissipates heat quicker than timber and composite decking.

6. Can you cut the Decking? Yes, Aluminium decking can easily be cut to the shape or length required.

27

Spans further thanany other deckingproduct, meaningquicker installation.

B+M Architectural 293 Coleford Road Darnall Sheffield S9 5NF

0114 254 3226 [email protected]

bmarchitectural.com

Documents

EazyDeck Alu - B+M Steel · psubstrate to EN ISO 6272 / ASTM D2794 • Bend test - on 5mm mandrel to ensure adhesion after bending to EN ISO 1519 • Machu Test (accelerated corrosion