Eaton UPS for communication room equipment€¦ · Last day of question submittal . October 23 2020; 2 p.m. local time : Final Addendum Issued . October 27 2020 : Submittals Due

1 | P a g e

REQUESTED BY: Becky George

DATE ISSUED: October 12, 2020

DUE: October 30, 2020 2pm EDT

Request for Proposal – Communication Room UPS Replacement

PLEASE QUOTE YOUR LOWEST NET PRICE F.O.B., ELYRIA, OHIO FOR PRODUCTS REQUIRED FOR A COMPLETE AND SATISFACTORY INSTALLATION. NO CHARGE WILL BE ALLOWED FOR PACKING OR CARTAGE. THE RIGHT IS RESERVED TO ACCEPT OR REJECT ALL OR PART OF THIS SUBMITTAL. DO NOT FAIL TO SIGN YOUR SUBMITTAL.

LORAIN COUNTY COMMUNITY COLLEGE IS EXEMPT FROM STATE AND FEDERAL TAX. CERTIFICATE AVAILABLE UPON REQUEST. Eaton UPS for communication room equipment

REQUEST FOR PROPOSALS Electronic proposals will be received at the Lorain County Community College (LCCC) Purchasing Office, Rm 209 PC Campana Building, 1005 North Abbe Road, Elyria, Ohio (44035), by email to [email protected], until 2:00 pm on Friday, October 30, 2020 for supplying the specified components, providing installation, testing/verification NOTICE! In order to receive any addenda or supplemental information, you MUST register with the LCCC Purchasing Office, either by mail at 1005 Abbe Road North, Elyria, Ohio 44035-1691; by telephone at 440-366-4633; by fax at 440-366-4648; or by email to Becky George at [email protected]. The following information is required:

Name of Firm Contact Name Street Address City, State Zip Telephone Fax Phone (optional) Email address

Purchasing Department Room 209 PC Campana Building 1005 North Abbe Road Elyria, OH 44035 PHONE: 440-366-4633 FAX: 440-366-4648 Email: [email protected]

mailto:[email protected]

2 | P a g e

Submittal Requirements

1) Inquiries and information requests Prior to submission

The LCCC Purchasing office will act as the clearinghouse for all inquiries and information requests. All requests must be submitted electronically to Becky George, Manager, Procurement and Distribution Services: [email protected].

All answers to requests will be provided to all registered parties by the LCCC Purchasing Office via electronic distribution. Addendums will also be posted on the college website with the original RFP specifications. Any other responses to questions not via the Purchasing Office are considered casual and not binding.

All current COVID-19 safe practices will be followed for on-site review of project site(s). This includes, but not limited to: face covering, hand sanitizing/washing, social distancing when possible.

2) Timeline:

The tentative schedule for evaluation, selection and award is as follows:

Issuance of RFP – First Ad October 12 2020

Second Ad October 19 2020

Project Walk-thru; Start: PC 101* October 20 2020; 9 a.m. local time

Last day of question submittal October 23 2020; 2 p.m. local time

Final Addendum Issued October 27 2020

Submittals Due October 30 2020; 2pm EST

Submittal of Preferred Supplier to Controlling Board November 12 2020

Anticipated Award by Controlling Board December 14 2020

Issuance of Purchase Order to Supplier December 30 2020

Key dates may be altered by the College; registered parties will be updated via Addendum should any alteration occur.

Project Walk-thru will be at multiple locations; starting location is The Patsie C. and Dolores Jenee Campana Center for Ideation and Invention.

1. Elyria Campus 2. University Partnership Ridge Campus, 32121 Lorain Rd. North Ridgeville, OH 3. Wellington Outreach Center, 151 Commerce Dr. Wellington, OH 4. Lorain Learning Center at City Center, 201 West Erie Ave. Lorain, OH


3 | P a g e

3) Proposal Instructions:

Proposals are to be submitted on the forms provided by Lorain County Community College, and are to be inclusive of all components, delivery and installation, testing/verification, and removal and disposal of Old UPS equipment. If you wish to submit more than one solution, please complete a separate response form for each. The awarded Vendor shall give all notices, pay all fees, and comply with all laws, ordinances, rules, and regulations bearing on the work. The Purchase Order will be awarded to the vendor providing the best value, which includes cost, capacity, schedule and experience. LCCC will make the sole evaluation of all proposals submitted, and reserves the right to reject any and all proposals or parts thereof or items therein and to waive any informality and determine it is in the best interest of LCCC to accept it.

4) Complete Submittals: Respondents shall electronically submit their proposal containing all the requested information to the Lorain County Community College Purchasing Office attention to Becky George at [email protected] by October 30, 2020; 2:00 p.m. local time

• All quotes and pricing is to be held for sixty (60) days from date of submittal due date, October

30, 2020.

• Funding for this project is based on approval and availability of funds from the State of Ohio

Controlling Board. Failure of the Controlling Board to approve or award funding for this project

will significantly impact this project and may result in NO AWARD being made.

• Late responses may be deemed unresponsive. At its sole discretion, the College reserves the right

to reject any proposal not deemed satisfactory and to waive any and all irregularities in the

procedure deemed to not have a significant impact on the proposal process. Omission,

inaccuracy, or misstatement may be sufficient cause for a proposal to be deemed unresponsive

and/or irresponsible.

• There will be NO public opening; submittals may be viewed by appointment with the Purchasing

Office.

• COVID-19: The College works closely with local and state departments of health with regards to

best practices for management and mitigation of COVID-19 and related issues. Awarded supplier

and all sub-contractors will be required to follow all regulations in place at time of project

commencement.


4 | P a g e

Disclaimers and Disclosures In its sole discretion, the College may withdraw the Request for Proposal (RFP) either before or after receiving submissions, may accept or reject submissions, and may accept submissions which deviate from the RFP as it deems appropriate and in the College’s best interest. In its sole discretion, the College may determine the qualifications and acceptability of any party or parties submitting in response to this RFP. Following submission of a RFP, the respondent agrees to deliver such further details, information and assurances, including financial and disclosure data, relating to the response and/or the respondent, including the respondent’s affiliates, officers, directors, shareholders, partners and employees, as requested by the College in its discretion. The College and its advisors shall have no obligation or liability with respect to this RFP, the selection and award process contemplated hereunder, or whether any award or recommendation will be made. All costs incurred by a respondent in preparing and responding to this RFP are the sole responsibility of the respondent. Any recipient of this RFP who responds hereto, fully acknowledges all the provisions of this disclosure and disclaimer and agrees to be bound by the terms hereof. Any response submitted pursuant to this RFP is at the sole risk and responsibility of the party submitting such response. The College reserves the right to waive any and all irregularities in the best interest of the College. The College is governed by the Ohio “Open Records Law” and all responses and supporting data shall be subject to disclosure as required by the law.

The supplier in submitting a response to the RFP and/or filling a Purchase Order agrees not to discriminate against any employee or applicant for employment, with respect to hire, tenure, terms, conditions, or privileges of employment, or any matter directly or indirectly related to employment, because of sex, race, color, religion, national origin, ancestry, handicap, or age. All Terms and Conditions of the College will apply to this project, as are standard with the issuance of a College Purchase Order, and are not modifiable. To review, go to: LCCC Purchasing, and click on Terms & Conditions. Please be aware, that as a public institution receiving State of Ohio funds, the clauses that are immutable concern indemnification and jurisdiction of Law. Make sure your legal department is aware prior to submitting a response.

Thank you for your interest in Lorain County Community College.

https://www.lorainccc.edu/About+Us/Purchasing/

5 | P a g e

Project Overview LCCC maintains a minimum of one communication room per building. These communication rooms need to maintain a minimum 28 minute Uninterruptable Power Supply (UPS) to all of the equipment within the communication room. Each communication room already has an Eaton UPS system that will need to be removed and properly disposed of as a new Eaton UPS system in installed. There may be some electrical work that will need to be completed to support the new Eaton UPS system. There is a second optional project to provide the Eaton UPS for the college data center. Communication rooms must pass to pass an electrical inspection prior to the completion of the work. Project Objectives

• Supply the bill of materials as identified in this RFP. No substitutions • All work must meet National Electrical Code requirements and any additional manufacturer

or vendor grounding specifications (Eaton, NEC Phone Switch, By-pass switches, etc.) • Delivery and placement of the new replacement UPS units at the appropriate installation

locations. • Coordination with owner regarding any power outages required for the UPS protected

Communication Racks/Cabinets. o Some of the required power outages may be required to be performed during LCCC

non-business hours. • Electrical disconnect of existing UPS units and connectivity of new replaced units, including

any required changes to the existing electrical panels, sub-panels, electrical feeds, circuit breakers, etc.

• Installation of new UPS units and associated equipment within the communication room. • Coordination with Eaton with the initial power up of ALL new UPS unit installations. This is

an Eaton requirement for their warranty and support contracts. • Reconnection of the existing power distribution devices, electrical outlets, and associated

electrical cabling for the existing Communication Racks/Cabinets being protected by the UPS units.

• Site removal and disposal of the old UPS units. • 1 year of 24/7 onsite parts and labor. • (Optional Bid) – The same above requirements for the Data Center.

Communication Room UPS Replacement – System Specifications

6 | P a g e

Overview of the UPS replacement in Communication Closets; product specifications follow.

• There are 42 communication rooms on the LCCC main campus:

Building and Room Number


AT116FF LC010 BU120 (BU113) LC187 CC015 LC246 CC105 LD113 CC239A LS114 CH127 MS100 CU123 MS103 EC003 PC102 EIC113A PC106 EIC210 PE203 EIC220 PP106 EIC240 PP118 EIC240 PS206 EIC310 SC133 EIC320 SC181A EIC340 SM134 EIC350 SM314 EIC360 SP004 ILoft005 SP120A iLoft111G UC326 iLoft222 UC227

• There are 6 communication rooms in the Outreach Centers



LHS215 RC223 RC204 RC305 RC211 WC109

• (Optional) Data Center

Campus map available: LCCC Campus Maps

https://www.lorainccc.edu/about/wp-content/uploads/sites/64/2020/02/Campus-Map-2-a.pdf

Communication Room UPS Replacement – System Specifications

7 | P a g e

General Specification Information:

• All responses must meet or exceed the specifications provided. • All equipment must be new.

• General performance specifications are noted

o It is the responsibility of the supplier to assure all additional components that may

be required for proper functionality are included.

o Specifications are utilizing a brand-name, model numbers, or other designations that identify the specific products required as defined by the College.

o Brand must remain Eaton, any other models substantially better to those named will be considered for award, with the College reserving the final right to determine equivalency.

• Delivery, installation, removal services

• Any sub-contractor being engaged on behalf of the respondent has to be pre-approved by

the college. The college reserves the right to reject any sub-contractor being suggested. It is highly recommended to include any sub-contractor information with your proposal at time of submittal.

• Any alterations or updates to communication rooms (i.e. electrical updates) are required to be completed by a licensed will be subject to Prevailing Wage Rates in place at time of commencement.

PROPOSAL RESPONSE FORM DUE: Friday, October 30, 2020; 2:00pm EST

PF | 1

Company information and signature required: Company Name: _____________________________________________ By (typed or printed): _____________________________________________ Authorized Signature : _____________________________________________ Title: _____________________________________________ Address: _____________________________________________ _____________________________________________ (City, State, Zip) Telephone: _____________________________________________ Fax: _____________________________________________ Email: _____________________________________________ Federal Tax I.D. or TIN: _____________________________________________ Date: _____________________________________________

AT116FF Qty Description Part #

116750224-001 1 Environmental Monitoring Probe

• Environmental Monitoring Probe (EMP). Monitors temperature and humidity. Requires ConnectUPS Web/SNMP device(use with ConnectUPS-X, -BD, -E).

• Weight: 0.65

4 FLEX: NEXT DAY RSP, 7X24 CVG ONLY W2FLN7NXXX-0010

• Onsite 7x24 UPS parts and labor coverage.• Pricing is per year, for years 2-5. Adjust qty for desired coverage. (Note: Customer must purchase an additional PM for

years 4 and 5 to be valid)• Weight: 1.00

1 UPS PREVENTIVE MAINTENANCE, AFTER HOURS (7X24) W20005NXXX-0010

• Weight: 1.00

1 9155 MODEL 8 64 BATTERY K40812000000000

• On-line topology; ABM technology; (2) X-slot communication bays; REPO contact; Tower form factor (2 high or 3 highdepending on model); requires input neutral. Includes on-site 5x8 startup.

• Power: 8000VA / 7200W• Input Voltage: 120/208-240V• Output Voltage: 120/208-240V• Input Connection: Hardwired• Output Connection: Hardwired• Runtime (Full Load/Half Load): 29 min/67 min• Dimensions (H x W x D): 47.80 x 12.00 x 33.70• Weight: 640.00• Onsite 5x8 start up service included. Start-up required to validate warranty.

BU120 (BU113)

1 Power Xpert Gateway Card Part #

PXGXUPS • Modbus TCP/IP and SNMP v1 and v3 support offers open

communication protocol and facilitates integration of yourEaton Powerware UPSs with standard building managementsystems and network management systems.

• Remote alarm and event email notification: individual emailsor collective notification.

• Card is hot-swappable so it can be installed without turning offpower to the unit or disconnecting the load.

• Supports Eaton Environment Monitor Probe.• Dimensions (H x W x D): 4.70 x 4.50 x 1.50• Weight: 0.91

1 FLEX:NEXT DAY RSP, 7X24 CVG ONLY Part #

W1FLN7NXXX-0010 • Onsite 7x24 UPS parts and labor coverage.• Pricing for first year only.• Weight: 1.00

Qty Description

1 9355 20 KVA 208V WITH INTERNAL BATTERY (SINGLE/DUALFEED) Part #

KB2013100000010 • On-line topology; ABM technology; (2) X-slot communicationbays; REPO contact; Includes internal maintenance bypassswitch; Tower form factor; Requires input neutral. Includes on-site 5x8 startup.

• Power: 20000VA / 18000W• Input Voltage: 208Y/120V• Output Voltage: 208Y/120V• Input Connection: Hardwired• Output Connection: Hardwired• Runtime (Full Load/Half Load): 18 min/42 min• Dimensions (H x W x D): 66.00 x 20.00 x 34.10• Weight: 1190.00










W2FLN7NXXX-0030 • Onsite 7x24 UPS parts and labor coverage.• Pricing is per year, for years 2-5. Adjust qty for desired

coverage. (Note: Customer must purchase an additional PM foryears 4 and 5 to be valid)

• Weight: 1.00

1 UPS PREVENTIVE MAINTENANCE, AFTER HOURS (7X24) Part #

W20005NXXX-0020 • Weight: 1.00

CC015

CC105

1 Environmental Monitoring Probe Part #

116750224-001 • Environmental Monitoring Probe (EMP). Monitors temperature

and humidity. Requires ConnectUPS Web/SNMP device (usewith ConnectUPS-X, -BD, -E).

• Weight: 0.65

Qty Description




W2FLN7NXXX-0010 • Onsite 7x24 UPS parts and labor coverage.• Pricing is per year, for years 2-5. Adjust qty for desired


• Weight: 1.00


W20005NXXX-0010 • Weight: 1.00

1 PW9155 8 kVA 32 Battery (2-high), With Web-Card & PDM Part #

K4081103BBJJ000 • Weight: 640.00• Onsite 5x8 start up service included. Start up required to

validate warranty.







1 Environmental Monitoring Probe Part #

116750224-001 • Environmental Monitoring Probe (EMP). Monitors temperature

and humidity. Requires ConnectUPS Web/SNMP device (usewith ConnectUPS-X, -BD, -E).

• Weight: 0.65

Part #

9SW5Y-6000UC

Qty Description

1 EXT WARRANTY-5YR UPS ADV EXCHG, NEW PRODUCT

• Warranty-5: 5-year-total warranty (UPS) for new productpurchase.

• For use with all 9 Series UPS Models

CC239A

1 Environmental Monitoring Probe Generation 2 Part #

EMPDT1H1C2 • Environmental Monitoring Probe (EMP) Generation 2. Monitors

temperature, humidity, and two dry-contact status datapoints. Requires NETWORK-M2 card. Up to 3 EMP Gen 2 can bedaisy chained together.

• Weight: 0.65

1 KIT: (9PX5K+9PXTFMR5) Part #

9PX5KTF5 • Graphical LCD screen enables you to customize UPS settings,

diagnose UPS alarms and view load and power consumption• Includes Eaton's ABM Technology for 50% longer battery life• Includes connectivity card• 93% efficiency rating in normal mode• 4-post rail kit included (2-post rail kit optional)• Warranty (US and Canada): Two-year limited warranty,

$250,000 load protection guarantee• Power: 5000VA / 4500W• Input Voltage: 208-240V• Output Voltage: 120/240V• Input Connection: Terminal block with 6' L6-30P cord• Output Connection: Hardwire(1) L6-30R(2) L6-20R(18) 5-20R• Runtime (Full Load/Half Load): 3 min/8 min• Dimensions (H x W x D): 10.20 x 17.30 x 28.40• Weight: 246.00

Qty Description


W20005NXXX-0080 • Weight: 1.00

1 Environmental Monitoring Probe

• Environmental Monitoring Probe (EMP). Monitors temperatureand humidity. Requires ConnectUPS Web/SNMP device (usewith ConnectUPS-X, -BD, -E).

• Weight: 0.65

Part #

116750224-001

1 Eaton 93PM UPS

• Includes 7x24 Startup• 1 year on-site parts and labor coverage• Includes 1 year PredictPulse monitoring• System Voltage: 208V or 220V 4 wire in, 208 or 220V 3 or 4

wire out• UPS Frame Capacity: 60kW• Quantity of 20kW Power Modules: 2• UPS kW Rating: 30• Internal Redundant Configuration: No• Interal Battery Configuration: No Internal Batteries• Input Feed: Single Feed• ESS Included: Yes• Communication: Power Xpert Gateway Card, Industrial Relay

Card, and EMP• Accessories: None• Side Car: 3 Breaker Sidecar MBS• Side Car Breaker Rating: Standard, MBS & BIB Montiored• Exhaust Configration: Top Air Exhaust• Internal Runtime: No Internal Batteries• UPS Dimensions (H" x W" x D"): 74 x 34.5 x 42• UPS Weight (lbs): 639

Part #

9GC206A029E20R0

1 Battery Cabinet

• Battery Cabinet: IBC-SW• kW for Runtime Calculation: 30• Runtime (min): 28• # of Cabintes/Strings: 1/1 Battery Manufacturer: Eaton• Battery Installation: Line and Match• OSHPD Rated: No• DC Voltage: 480• Battery Cabinet Weight (lbs): 2159

Part #

9PZWGBE20010000

CH127

1 WALL-MOUNT REPO SWITCH

• Remote Emergency Power Off Switch• Configurable as Normally Open or Normally Closed• Dimensions (H x W x D): 3.75 x 3.75 x 3.50• Weight: 5.00

Part #

103006244

1 93PM Certified Test Data Part #

CTD93PM

4 FLEX:8 HR RSP, 7X24 CVG ONLY

• Onsite 7x24 UPS parts and labor coverage.• Pricing is per year, for years 2-5. Adjust qty for desired


• Weight: 1.00

Part #

W2FL87NXXX-0050

Qty Description

1 UPS PREVENTIVE MAINTENANCE, AFTER HOURS (7X24)

• Weight: 1.00

Part #

W20005NXXX-0010

1 Power Xpert Gateway Card

• Modbus TCP/IP and SNMP v1 and v3 support offers opencommunication protocol and facilitates integration of yourEaton Powerware UPSs with standard building managementsystems and network management systems.




Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

1 Eaton 9155 UPS w/ receptacles Part #

K4101200BGGX000

1 FLEX:NEXT DAY RSP, 7X24 CVG ONLY

• Onsite 7x24 UPS parts and labor coverage.• Pricing for first year only.• Weight: 1.00

Part #

W1FLN7NXXX-0010




• Weight: 1.00

Part #

W2FLN7NXXX-0010

CU123

EC003

Qty Description

1 9155 MODEL 8 64 BATTERY

• On-line topology; ABM technology; (2) X-slot communicationbays; REPO contact; Tower form factor (2 high or 3 highdepending on model); requires input neutral. Includes on-site5x8 startup.

• Power: 8000VA / 7200W• Input Voltage: 120/208-240V• Output Voltage: 120/208-240V• Input Connection: Hardwired• Output Connection: Hardwired• Runtime (Full Load/Half Load): 29 min/67 min• Dimensions (H x W x D): 47.80 x 12.00 x 33.70• Weight: 640.00• Onsite 5x8 start up service included. Start up required to

validate warranty.• Customer to verify output receptacles needed***

Part #

K40812000000000



Part #

W1FLN7NXXX-0015




• Weight: 1.00

Part #

W2FLN7NXXX-0015



• Weight: 0.65

Part #

116750224-001






Part #

PXGXUPS

Qty Description



• For use with all 9 Series UPS Models• Weight: 1.00

Part #

9SW5Y-2200UC

EIC113A

1 Environmental Monitoring Probe Generation 2

• Environmental Monitoring Probe (EMP) Generation 2. Monitorstemperature, humidity, and two dry-contact status datapoints. Requires NETWORK-M2 card. Up to 3 EMP Gen 2 can bedaisy chained together.

• Weight: 0.65

Part #

EMPDT1H1C2

1 KIT: (9PX2000RT+NETWORK-M2)

• Graphical LCD screen enables you to customize UPS settings,diagnose UPS alarms and view load and power consumption

• Includes Eaton's ABM Technology for 50% longer battery life• Includes connectivity card (Network-M2)• Up to 94% efficiency rating in normal mode• 4-post rail kit included (2-post rail kit optional)• Warranty (US and Canada): Two-year limited warranty,

$250,000 load protection guarantee• Power: 2000VA / 1800W• Input Voltage: 120V• Output Voltage: 120V• Input Connection: 5-20P• Output Connection: (6) 5-20R, (1) L5-20R• Runtime (Full Load/Half Load): 8 min/20 min• Dimensions (H x W x D): 3.40 x 17.30 x 23.80• Weight: 76.40

Part #

9PX2000RTN

Qty Description

1 PW9155 MODEL 8 32 BATTERY



validate warranty.

Part #

K40811000000000

1 PW9155 EBM 64

• 9155/9355 EBM• Dimensions (H x W x D): 32.20 x 12.00 x 30.20• Weight: 538.00

Part #

103004192-5501



Part #

W1FLN7NXXX-0010




• Weight: 1.00

Part #

W2FLN7NXXX-0010


• Weight: 1.00

Part #

W20005NXXX-0010

EIC210, EIC220, EIC240, EIC240

EIC310-360






Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

Qty Description



• Weight: 0.65

Part #

EMPDT1H1C2




Part #

9SW5Y-2200UC





Part #

9PX2000RTN

Qty Description

ILoft005



• Weight: 0.65

Part #

EMPDT1H1C2




Part #

9SW5Y-2200UC





Part #

9PX2000RTN

Qty Description





Part #

9PX2000RTN




Part #

9SW5Y-2200UC



• Weight: 0.65

Part #

EMPDT1H1C2

LC010

Qty Description

1 9355 20 KVA 208V WITH INTERNAL BATTERY (SINGLE/DUALFEED)

• On-line topology; ABM technology; (2) X-slot communicationbays; REPO contact; Includes internal maintenance bypassswitch; Tower form factor; Requires input neutral. Includes on-site 5x8 startup.


Part #

KB2013100000010






Part #

PXGXUPS

1 9355-20/30 3-BKR MBP

• 3-breaker wall mount MBP. 225A Bus, 225A Neutral, 125A MBP,110A MIB and 110A MIS.

• Input Voltage: 208Y/120V• Output Voltage: 208Y/120V• Input Connection: Hardwired• Output Connection: Hardwired• Dimensions (H x W x D): 48.00 x 20.00 x 5.80• Weight: 200.00

Part #

124100028-001



Part #

W1FLN7NXXX-0020


• Weight: 1.00

Part #

W20005NXXX-0020




• Weight: 1.00

Part #

W2FLN7NXXX-0020



• Weight: 0.65

Part #

116750224-001

LC187

LC246

Qty Description




validate warranty.

Part #

K41511000000000

1 PW9155 EBM 64


Part #

103004192-5501



Part #

W1FLN7NXXX-0015


• Weight: 1.00

Part #

W20005NXXX-0015




• Weight: 1.00

Part #

W2FLN7NXXX-0015






Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

LD113




validate warranty.

Part #

K41511000000000

1 PW9155 EBM 64


Part #

103004192-5501



Part #

W1FLN7NXXX-0015




• Weight: 1.00

Part #

W2FLN7NXXX-0015


• Weight: 1.00

Part #

W20005NXXX-0015






Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

Qty Description




Part #

9SW5Y-2200UC

LHS215

LS114

2 9PX 2-POST RAIL KIT

• 2-post rack mounting rail kit• Weight: 3.00

Part #

RK2PC



• Weight: 0.65

Part #

EMPDT1H1C2





Part #

9PX2000RTN

Qty Description





Part #

9PX2000RTN



Part #

RK2PC




Part #

9SW5Y-3000UC

MS100




validate warranty.

Part #

K41511000000000

1 BPM 125 HW

• Bypass Power Module• Hardwired Input/Output• Dimensions (inches): 5.1(3U) x17.3 x25.6• Weight: 35 lbs• Weight: 2.00

Part #

BPM125HW



Part #

W1FLN7NXXX-0015




• Weight: 1.00

Part #

W2FLN7NXXX-0015


• Weight: 1.00

Part #

W20005NXXX-0015






Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

Qty Description

MS103

PC102




$250,000 load protection guarantee• Power: 3000VA / 2700W• Input Voltage: 120V• Output Voltage: 120V• Input Connection: L5-30P• Output Connection: (6) 5-20R, (1) L5-30R• Runtime (Full Load/Half Load): 4 min/12 min• Dimensions (H x W x D): 3.40 x 17.30 x 23.80• Weight: 76.40

Part #

9PX3000RTN




Part #

9SW5Y-3000UC

1 9PX EBM 72V RT

• Use with 9PX 2-3K 2U UPS (excludes 9PX3K3UN Models)• Dimensions (H x W x D): 5.10 x 17.30 x 23.80• Weight: 100.31

Part #

9PXEBM72RT

Qty Description





Part #

9PX2000RTN



• Weight: 0.65

Part #

EMPDT1H1C2




Part #

9SW5Y-2200UC

PC106

PE203



• Weight: 0.65

Part #

EMPDT1H1C2




Part #

9SW5Y-1500UC




$250,000 load protection guarantee• Power: 1500VA / 1350W• Input Connection: 5-15P• Output Connection: (8) 5-15R• Dimensions (H x W x D): 3.40 x 17.30 x 17.70• Weight: 54.89

Part #

9PX1500RTN

Qty Description



• Weight: 0.65

Part #

EMPDT1H1C2




Part #

9SW5Y-3000UC





Part #

9PX3000RTN

Qty Description

PP106

PP118

1 9PX BATTERY INTEGRATION SYSTEM

• Kit includes all hardware required to tie together (1) UPSmodule, (1) PPDM or transformer module, (1) "internal batterymodule", and (5) external batt

• Dimensions (H x W x D): 7.90 x 20.50 x 31.50• Weight: 59.52

Part #

BINTSYS




Part #

9SW5Y-11000UC



• Weight: 0.65

Part #

EMPDT1H1C2

1 9PX 8/11kVA EBM 240V

• Increase your backup time for critical loads with up to (5)external battery modules

• Dimensions (H x W x D): 5.10 x 17.30 x 25.40• Weight: 163.50

Part #

9PXEBM240RT

1 KIT: (9PX11KPM+9PXEBM240RT+9PXTFMR11+MBP11K208)

• Bundle includes: (1) 11KVA UPS module, (1) 8-11kVA EBM, (1)8-11kVA MBP, and (1) 10kW transformer


• Includes Eaton's ABM Technology for 50% longer battery life• Includes connectivity card• 94% efficiency rating in normal mode• 4-post rail kit included (2-post rail kit optional)• Warranty (US and Canada): Two-year limited warranty,

$150,000 load protection guarantee• Power: 11000VA / 10000W• Input Voltage: 208-240V• Output Voltage: 120/240V• Input Connection: Hardwired• Output Connection: Hardwired + (2) L14-30R(8) 5-20R• Runtime (Full Load/Half Load): 3 min/10 min• Dimensions (H x W x D): 15.30 x 17.30 x 27.60• Weight: 454.00

Part #

9PX11KTF11M

Qty Description




Part #

9SW5Y-1500UC



• Weight: 0.65

Part #

EMPDT1H1C2

PS206




Part #

9SW5Y-1500UC



• Weight: 0.65

Part #

EMPDT1H1C2




$250,000 load protection guarantee• Power: 1500VA / 1350W• Input Connection: 5-15P• Output Connection: (8) 5-15R• Dimensions (H x W x D): 3.40 x 17.30 x 17.70• Weight: 54.89

Part #

9PX1500RTN

Qty Description


• Weight: 1.00

Part #

W20005NXXX-0030



• Weight: 0.65

Part #

116750224-001




Part #

KB2013100000010

1 PW9355 Battery Cabinet with 36 batteries 2-Str, line and mat

• Extended Battery, with 36 batteries (2-Strings), line and match• Dimensions (H x W x D): 66.00 x 20.00 x 34.10• Weight: 1100.00

Part #

103005183

RC204

RC211






Part #

PXGXUPS



Part #

W1FLN7NXXX-0030




• Weight: 1.00

Part #

W2FLN7NXXX-0030

Qty Description



• Weight: 0.65

Part #

EMPDT1H1C2




Part #

9SW5Y-3000UC





Part #

9PX3000RTN

Qty Description

RC223




Part #

9SW5Y-3000UC



• Weight: 0.65

Part #

EMPDT1H1C2





Part #

9PX3000RTN

Qty Description

1 PW9355 208V WITH INTERNAL BATTERY (SINGLE OR DUAL FEED)

• Input Voltage:• AC 208 V• Output Voltage:• AC 208 V• Input Connector:• Hardwire• Output Connector:• Hardwire• Power Provided:• 30000 VA• Battery:• Lead acid 9 Ah• Interfaces:• 1 x management - RS-232 - 9 pin D-Sub (DB-9)• Expansion Slots Total (Free):• 2 ( 2 ) x X-Slot• Weight: 1190.00

Part #

KB3013130000010



Part #

103005183

1 9355-20/30 3-BKR MBP



Part #

124100028-001

RC305



Part #

W1FLN7NXXX-0030




• Weight: 1.00

Part #

W2FLN7NXXX-0030


• Weight: 1.00

Part #

W20005NXXX-0030






Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

Qty Description



Part #

RK2PC



• Weight: 0.65

Part #

EMPDT1H1C2




Part #

9SW5Y-3000UC

SC133





Part #

9PX3000RTN

Qty Description




validate warranty.

Part #

K40811000000000

2 PW9155 EBM 64

• 9155/9355 EBM• Dimensions (H x W x D): 32.20 x 12.00 x 30.20• Weight: 538.00• Qty 1 EBM: 16 min at 6500W• Qty 2 EBM: 63 min at 6500W

Part #

103004192-5501



Part #

W1FLN7NXXX-0010




• Weight: 1.00

Part #

W2FLN7NXXX-0010


• Weight: 1.00

Part #

W20005NXXX-0010

SC181A






Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

Qty Description




validate warranty.

Part #

K41212000000000



Part #

W1FLN7NXXX-0015




• Weight: 1.00

Part #

W2FLN7NXXX-0015


• Weight: 1.00

Part #

W20005NXXX-0015






Part #

PXGXUPS

SM134



• Weight: 0.65

Part #

116750224-001

Qty Description




validate warranty.

Part #

K41212000000000

2 PW9155 EBM 96


Part #

103004193-5501



Part #

W1FLN7NXXX-0015




• Weight: 1.00

Part #

W2FLN7NXXX-0015


• Weight: 1.00

Part #

W20005NXXX-0015






Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

SM314

SP004

Qty Description




validate warranty.

Part #

K41212000000000

1 PW9155 EBM 96


Part #

103004193-5501



Part #

W1FLN7NXXX-0015




• Weight: 1.00

Part #

W2FLN7NXXX-0015


• Weight: 1.00

Part #

W20005NXXX-0015






Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

SP120A



• Weight: 0.65

Part #

EMPDT1H1C2




Part #

9SW5Y-2200UC





Part #

9PX2000RTN

Qty Description




Part #

KB2013100000010



Part #

W1FLN7NXXX-0020




• Weight: 1.00

Part #

W2FLN7NXXX-0020


• Weight: 1.00

Part #

W20005NXXX-0020

UC326 & UC227






Part #

PXGXUPS



• Weight: 0.65

Part #

116750224-001

Qty Description




Part #

KB3013100000010



Part #

103005183

1 9355-20/30 3-BKR MBP



Part #

124100028-001



Part #

W1FLN7NXXX-0030




• Weight: 1.00

Part #

W2FLN7NXXX-0030

WC109


• Weight: 1.00

Part #

W20005NXXX-0030


• Modbus TCP/IP and SNMP v1 and v3 support offers openPcommunication protocol and facilitates integration of your

Eaton Powerware UPSs with standard building managementsystems and network management systems.




Part #

XGXUPS

Qty Description




validate warranty.

Part #

K41012000000000



Part #

W1FLN7NXXX-0010




• Weight: 1.00

Part #

W2FLN7NXXX-0010


• Weight: 1.00

Part #

W20005NXXX-0010


• Modbus TCP/IP and SNMP v1 and v3 support offers openPcommunication protocol and facilitates integration of your

Eaton Powerware UPSs with standard building managementsystems and network management systems.




Part #

XGXUPS

iLoft111G

iLoft222



• Weight: 0.65

Part #

116750224-001

Qty Description




validate warranty.

Part #

K41511000000000



Part #

W1FLN7NXXX-0015




• Weight: 1.00

Part #

W2FLN7NXXX-0015



• Weight: 0.65

Part #

116750224-001






Part #

PXGXUPS


• Weight: 1.00

Part #

W20005NXXX-0015




validate warranty.

Part #

K41511000000000

1 PW9155 EBM 64


Part #

103004192-5501



Part #

W1FLN7NXXX-0015




• Weight: 1.00

Part #

W2FLN7NXXX-0015


• Weight: 1.00

Part #

W20005NXXX-0015



• Weight: 0.65

Part #

116750224-001






Part #

PXGXUPS

Condensed Bill of Materials

Quantity

1

1

1

4

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

1

4

1

4

1

4

1

4

Part Number

116750224-001

K41511000000000

9PX2000RTN

W2FLN7NXXX-0010

W20005NXXX-0010

K40812000000000

PXGXUPS

W1FLN7NXXX-0010

K41511000000000

K41511000000000

K41511000000000

K41511000000000

103004192-5501

103004192-5501

103004192-5501

K40811000000000

103004192-5501

K41212000000000

K41212000000000

103004193-5501

K41212000000000

103004193-5501

BPM125HW

KB3013130000010

103005183

124100028-001

K40811000000000

103004192-5501

BINTSYS

KB2013100000010

W1FLN7NXXX-0010

K41012000000000

W1FLN7NXXX-0015

W2FLN7NXXX-0015

W1FLN7NXXX-0015

W2FLN7NXXX-0015

W1FLN7NXXX-0015

W2FLN7NXXX-0015

W1FLN7NXXX-0015

W2FLN7NXXX-0015

Qty. Description Part # 1 Eaton 93PM UPS 9PG08D0029E20R2

• System Voltage: 480V in, 480V out (3 wire) • UPS Frame Capacity: 100kW • Quantity of 50kW Power Modules: 2 • UPS kW Rating: 80 • Internal Redundant Configuration: No • Interal Battery Configuration: None • Input Feed: Single Feed • ESS Included: Yes • Communication: Power Xpert Gateway Card, Industrial Relay Card, and EMP • Accessories: Sidecar Bypass Cabinet • Side Car: 3 Breaker MBS, Left Mount Side Car • Breaker Rating: 35kAIC MBS w/ Aux contact • Exhaust Configration: Top Air Exhaust • Internal Runtime: None • UPS Dimensions (H" x W" x D"): 74 x 30 x 42 • UPS Weight (lbs): 1107

1 Battery Cabinet 9PZTBBE39010000

• 93PM Battery Cabinet • 9PZTBBE39010000 Battery Cabinet: IBC-LW • DC Voltage: 480 • kW for Runtime Calculation: 80 • Runtime (min): 30 • # of Cabinets/Strings: 1/1 • Battery Manufacturer: Eaton • Battery Installation: None • OSHPD Rated: No • Battery Cabinet Weight (lbs): 4048 • Battery Cabinet Dims (in): 34.2" W x 74" H x 42" D

1 WALL-MOUNT REPO SWITCH 103006244

• Remote Emergency Power Off Switch • Configurable as Normally Open or Normally Closed • Dimensions (H x W x D): 3.75 x 3.75 x 3.50 • Weight: 5.00

1 93PM Certified Test Data CTD93PM

4 FLEX: 8 HR RSP, 7X24 CVG ONLY W2FL87NXXX-0160

• Onsite 7x24 UPS parts and labor coverage. • Pricing is per year, for years 2-5. Adjust qty for desired

Coverage. (Note: Customer must purchase and additional PM for Years 4 and 5 to be valid)

• Weight: 1.00


• Weight: 1.00 W20005NXXX-0160

CONDENSED BILL OF MATERIALS

Quantity Part Number 1 9PG08D0029E20R2 1 9PZTBBE39010000 1 103006244

1 CTD93PM

4 W2FL87NXXX-0160

1 W20005NXXX-0160

Qty Description

1 Eaton 93PM UPS

• System Voltage: 480V in, 480V out (3 wire)• UPS Frame Capacity: 100kW• Quantity of 50kW Power Modules: 2• UPS kW Rating: 80• Internal Redundant Configuration: No• Interal Battery Configuration: None• Input Feed: Single Feed• ESS Included: Yes• Communication: Power Xpert Gateway Card, Industrial Relay

Card, and EMP• Accessories: Sidecar Bypass Cabinet• Side Car: 3 Breaker MBS, Left Mount Side Car• Breaker Rating: 35kAIC MBS w/ Aux contact• Exhaust Configration: Top Air Exhaust• Internal Runtime: None• UPS Dimensions (H" x W" x D"): 74 x 30 x 42• UPS Weight (lbs): 1107

9P

Part #

G08D0029E20R2

1 Battery Cabinet

• 93PM Battery Cabinet• 9PZTBBE39010000 Battery Cabinet: IBC-LW• DC Voltage: 480• kW for Runtime Calculation: 80• Runtime (min): 30• # of Cabinets/Strings: 1/1• Battery Manufacturer: Eaton• Battery Installation: None• OSHPD Rated: No• Battery Cabinet Weight (lbs): 4048• Battery Cabinet Dims (in): 34.2" W x 74" H x 42" D

Part #

9PZTBBE39010000

1 WALL-MOUNT REPO SWITCH

• Remote Emergency Power Off Switch• Configurable as Normally Open or Normally Closed• Dimensions (H x W x D): 3.75 x 3.75 x 3.50• Weight: 5.00

Part #

103006244

1 93PM Certified Test Data Part #

CTD93PM

ALTERNATE BID: DATA CENTER BILL OF MATERIALS

4 FLEX:8 HR RSP, 7X24 CVG ONLY



• Weight: 1.00

Part #

W2FL87NXXX-0160


• Weight: 1.00

Part #

W20005NXXX-0160

Condensed Bill of Materials

Notes

Washington state requires a certified electrician to be present for onsite work performedon UPS one year after startup. Additional fees may apply after first year. Part numberWASTELFEE $250 net per onsite visit should be added to any service quotes landing inWA state.

Quantity

1

1

1

1

4

1

Part Number

9PG08D0029E20R2

9PZTBBE39010000

103006244

CTD93PM

W2FL87NXXX-0160

W20005NXXX-0160

Eaton Corporation Terms and Conditions of Sale Revised 04/20 SP161002EN

Documents

Eaton UPS for communication room equipment€¦ · Last day of question submittal . October 23 2020; 2 p.m. local time : Final Addendum Issued . October 27 2020 : Submittals Due