EATON Hose and Fitting Presentationuvenk.com/files/from_site/HydraulicStc.pdf · 2017. 6. 26. · • What is Eaton Aeroquip’s Triple Crown Advantage? • Higher Pressure • Higher

© 2012 Eaton Corporation. All rights reserved.

EATON Hose and Fitting Presentation

Ulrich Ammer

Product Marketing Manager

Hose and Fittings, EMEA

2© 2012 Eaton Corporation. All rights reserved.

Eaton Fluid Conveyance product portfolio Overview EMEA

Flu

id C

on

ve

ya

nce

Hose & Fittings

Tube assemblies

Flexmaster

Adapters

STC®

PTFE

Couplings incl. HansenTM

and GromelleTM


New products innovations

GH850

500bar hose


Eaton Hose Material

A well proven quick connections System


Low – medium pressure„Braided“

1& 2 wire braided:

-4: 448 / 255 bar, -32: 41 / 110 bar

Textile braid:40 – 100 bar

Eaton Fluid Conveyance product groups

High / Super high pressure „Spiral“

4 spiral wire layers SP/SH- 6: 490bar-16: 280 bar/420 bar6 wire spiral layers:

350 - 420 bar

Air Conditioning

„A/C“

Polyamid / Barrier hosesWorking pressure up to

~ 35 bar

Special hoses

•AQP® (blue colour): High temperature

•Bruiser

•Suction hose SAE 100R4

•ICE: Low temperature

•PTFE: Aggressive medium, high temperature

•Synflex: Thermoplastic hoses/tubing

Connectors

•Crimp/ socketless Fittings

•100R5 Reusable Fittings

•Walterscheid Tube connectors

•Adapters

•Flexmaster

•Hydraulic/ Pneumatic/ A/C Couplings

•STC: Snap to Connect


The Triple Crown Advantage

• What is Eaton Aeroquip’s Triple Crown Advantage?

• Higher Pressure

• Higher Temperature

• Better Abrasion Resistance

• New DURA-TUFF™ cover

Overall – Eaton Aeroquip hose is higher in pressure by an average of 18%

compared to competitive products identified

GH663 – 1SN

GH793 – 2SN

GH781 – 2SC

GH120 MatchMate Ice

New MatchMate ® Global


The solution - GH100 ESP

• GH100 hose developed for use with up to 100% BioFuel in

under the hood applications use for trucks, Bus, AG,

Construction and Mobile Off- Highway

Specifications and fittings Part number HOSE I.D HOSE O.D. MAX. OPER.

Pressure MIN. BURST Pressure

MIN. Bend radius

(mm) mm) (bar) (bar) (mm)

GH100-4 6,4 13,3 28 112 31,8

GH100-6 9.5 15.9 28 112 38.1

GH100-8 12.7 19.1 28 112 50.8

GH100-10 15.9 23.1 24 96 63.5

GH100-12 19.1 27.9 24 96 76.2

Fitting design and qualification

• Global SAE Crimp and STC®; OTC fittings

• Custom Tube applications/Hose assemblies, D023B

Steel fittings for


Centaur hose EC100/EC200

“Centaur“ development

Unique technology of two combined production processes

Development of following types:

• EN857 1SC (EC100) /2SC (EC200) in sizes -4; -5; -6; -8

• Benefits

• Technical High-engineered Elastomer inner tube

• Standardized product globally

• Common design

• Same product supplied from each region worldwide

• Synthetic cover

• Wrapped cover – same cover from each plant (all wrapped)

• Compact design

• Small bend radius - Performance according to 1SC/2SC Norm DIN857

• DIN857 1SC/2SC performance dictates small bend radius• Easy installation

• “Made in Germany“

9© 2012 Eaton Corporation. All rights reserved.9

AQP (high temperature +150°C)

Hose pressure range Characteristics

FC510 (Hi-pac,1wire) -04: 345bar / -20: 112bar used with TTC, skive fittings Exceeds the SAE100 R2

GH194 (AQP) -4: 225bar / -20: 60bar used with TTC, skive fittingsExceeds the SAE100 R1AT MatchMate Blue

GH195 (AQP) -4: 400bar / -32: 100bar used with TTC, skive fittingsExceeds the SAE100 R2AT MatchMate Blue

Features:

� feasable for high temperatures up to +150°C

1 & 2 wire braid

Blue coloured cover for AQP

*Rubber covered hose styles for use with gases above 17.5 bar

(250psi) have to be perforated.


Low – medium pressure „Braided“

1& 2 wire braided:

-4: 448 / 255 bar, -32: 41 / 110 bar



High / Super high pressure„Spiral“


350 - 420 bar

Air Conditioning

„A/C“


~ 35 bar

Special hoses


•Bruiser





Connectors




•Adapters

•Flexmaster




Spiral Hose Aeroquip

Eaton as „Full-Liner“ offers...

• 420 bar working pressure at all sizes up to -32

• Abbreviation resistant outer skin „BRUISER“

for all sizes for 4SP, 4SH and 6SP hose

• Outer Layer depended on application

selectable

• „ICE HOSE“ for extreme cold temperatures

down to –55°C and working pressure up to

420 bar

• „AQP“ for high temperature applications up to

+150°C (blue outer skin)


Spiral Schlauch 4SP

Hose # Pressure Range Special Remarks

2755 -6 490bar/-16 320bar Use with Crimp- and Reusable Fittings

2755B -6 490bar/-16 320bar Abbreviation outer BRUISER

GH275 -6 490 bar/-16 320bar improved abbreviation and fluid

resistant

GH755 -6 490bar/-16 320bar Reduced Hose Cover,

use of TTC

GH435 -6 490bar/ -16 320bar verwendbar für aggressive Medien wie

Phosphat Ester

FC 323/324/325 -12 350bar/ -16 350bar AQP for high Temperature;

–40°C to +150°C


Spiral Hose 4SH

GH506 -12 420bar/-32 250bar High Performance 4SH Hose

GH200 -12 420bar / -16 420bar Standardperformance

GH355 -8/ 1000bar WATERBLAST Hose

Hose Type Size / Pressure Special Remark


Spiral Hose 6SP

GH466 -20 / 420bar 420 bar for all sizes

-24 / 420 bar

-32 / 420 bar

-40 /350bar

Komatus Mining PC8000Komatus Mining, Duesseldorf


GH466 – 32, 6SP

420 bar working pressure

size –32 [DN51]Temperatur Range –40°C to +120°C

EN856/100R15

Leakage Class 0

2 Millionen Flex -

Impuls Cyclen

New Fitting and

Nippel design

6 Wire layers

Safety Factor 4:1Application: Excavators, Agricultural Machines,

Mining, Plastic injection Machines, Presses,...


„ICE Hose“ GH810

Application:• High pressure for Mineral Oil

application for extreme cold

working conditions

sizes -4 up to -32,

working pressure 420 bar,

working temperature -55°C up to

+100°C

Design improvements :

• special hose cover for cold environmental temperatures

• Improved reliability usage time at

cold temperatures

• Improved hose internal hose

design



1& 2 wire braided:

-4: 448 / 255 bar, -32: 41 / 110 bar





350 - 420 bar

Air Conditioning

„A/C“


~ 35 bar

Special hoses


•Bruiser





Connectors




•Adapters

•Flexmaster




GH134 A/C Standard Hose

• Temperature Range: -40°to +125°C

• R134a Effusions rate at 80°C: 2,44 kg/cm²/year

• Moisture ingression: 0,0122g/cm²/year

• Fittings: Double O-Ring, Crimp fittings, E-Z-Clip


GH134 A/C

• Exceeding the requirements of SAE J2064 Type E

• Approval and used at several car manufacturer applications

• Polyamide inner tube: R134a Effusion rate 75% less then required within

SAE J2064

• Butyl rubber backing layer: moisture ingression values 70% lower than

required by SAE J2064

• Polyester Braided –Reinforcement allows excellent Flexibility

• Compatible with the following fluids:

• PAG, ester, mineral oil, alkyl benzene and the following refrigerants:

R22, R134a and R404a (further fluid on request).



1& 2 wire braided:

-4: 448 / 255 bar, -32: 41 / 110 bar





350 - 420 bar

Air Conditioning

„A/C“


~ 35 bar

Special hoses


•Bruiser





Connectors




•Adapters

•Flexmaster




Synflex - Product Program -thermoplastic hoses and tubing

• Hose Monowall and multilayer core tubesTextile and wire braidedSizes up to –32 (50 mm)

• Tubing Monowall and multilayer capabilitiesReinforced and non-reinforced

• Bundles PlasticMetal (for instance Synflex 1300)HosesInsulated and non-insulated

• Couplings one-piece fittings/two piece fittings


Fluid Power market

• Areal lifts/access platforms

• Lift trucks

• Rescue tools

• Automatic storage

• Marine

Offshore market

• Directional boring equipment

• Subsea control bundles

• Oil and gas pipe

rehabilitation

• De-ballasting systems

Speciality market

• Lubrication lines

• Compressed Natural Gas

dispensing

• Specialist hose for

conveying paint and coatings

spray

Truck Market

• Air brake tubes

• Multilayer core tubes

Markets


Basic Hose Construction

CORE TUBE

JACKET / SHEATH / COVER

FIBER

REINFORCEMENT

Polyvinyl Chloride (PVC)

Polyamide (Nylon 6, 6-6, 6-12, 11, 12)

Polyurethane

Co - Polyester Elastomer

Polyolefins

(Polyethylene, E.V.A., LLDPE, HDPE)

Thermoplastic Elastomer (TPE – TPR)

F.E.P. (Teflon)

Polyester Fiber

Nylon Fiber

Polyamide Fiber (Kevlar)

Polyvinyl Alcohol (PVA)

Rayon Fiber

Brass Plated Steel Wire

Stainless Steel Wire


Reinforcement

• Lapped / Served (Spiral) Product• Fibers tight or loosely grouped

• Fibers on the same layer have same orientation

• One layer applied on top of the other

• Not interwoven

• Layers paired and wrapped in opposite directions

• Braided Product

• Fibers tightly grouped

• Grouped fibers are interwoven


Off Shore Market

�Offshore Applications:

�Seismic – hose in towed arrays

�Directional boring equipment

�BOP pod bundles

�Hot Lines

�Jumper bundles

�Hydraulic flying lead systems

�IWOC and other sub-sea control bundles

�Other

�Jacking systems

�Oil and gas pipe repair

�De-ballasting systems



1& 2 wire braided:

-4: 448 / 255 bar, -32: 41 / 110 bar





350 - 420 bar

Air Conditioning

„A/C“


~ 35 bar

Special hoses


•Bruiser





Connectors




•Adapters

•Flexmaster




Fitting Styles

Socketless

Reuseable

Pressarmaturen (OTC/TTC)

ISC Fitting

TTC Fitting

„Super Gem“ Fitting

In Stahl und Edelstahl verfügbar


STC Snap to Connect

A well proven quick connections System


STC®

Male STCConnector

Latch Ring

O-Ring

Back-Up Ring

Female STCConnector

ReleaseSleeve

Leak Free Connections...in a Snap

With Over 30 Million Connections in Service Today


Features

• STC ® is tested and approved to the demanding high pressure

DIN 2ST (global) performance standard.

• While other quick-connect fittings are available for low pressure

service (less than 300psi), the robust design of STC ® provides

operating pressure capability up to 6,000 psi when STC adapters

are used.


STC® Availability

The STC ® connection is available in sizes -4 up to -16

A size -20 nipple can be combined with a -16 male

STC end


Proper Installation of STC ®

• Installation of the male STC ® connector must be

made straight into the adapter and not at an angle

• Do not use the rubber sleeve as leverage to push

the male half onto the female half

• After the STC ® connection is made, pull on the

connection to make sure the male and female are

properly connected

• Correct way to test an elbow


Actually in qualification

EC850 DYNAMAX®Multi spiral hose for 500bar working pressuer


New Hose program developmentHose EC850 -10 up to -20

Developed hose sizes with the appropriate working pressure w/ industry specs.:

size -10 [DN16] 500bar [7,250psi] DIN EN856/4SP 4 layers

size -12 [DN19] 500bar [7,250psi] DIN EN856/4SH 4 layers

size -16 [DN25] 500bar [7,250psi] SAE100R15 4 layers

size -20 [DN31] 500bar [7,250psi] SAE100R15 6 layers

considering pressure peaks and a four times safety factor.

EC850 DYNAMAX is flexible, light in weight and keep the high performance of 500bar

[7,250psi]

The new multi spiral wire layer hose EC850 will be produced in the euorpean hose

manufacturing plant in Hann.-Muenden, Germany.


New Hose program developmentFitting EC850 -10 up to -20

SAE Code 62 DKO-S ORS

future

requirement

Wire nutPull-over nut

Size -10 (20S)

Size -12 (25S)

Size -16 (30S)

Size -20 (38S)

Size -10 (20S)

Size -12 (25S)

Size -16 (30S)

Size -20 (38S)

Size -12

Size -16

Size -20

Size -24

Connection side

design for 500 bar


Market Situation & Requirements

The current development shows that the new generation of various vehicles for

different applications will have a working pressure over 420bar [6,000psi], meaning

ending up at 500bar [7,250psi].

The reasons are:

• the machines become bigger and bigger

• the space to route becomes smaller / stays the same compared to the big

machine

• the flow rates become higher

Some of the component manufacturers e.g. Bosch Rexroth and Linde have picked up

this new requirement and have developed the appropriate pumps feasible for 500bar

[7,250psi].

Also Eaton will be prepared for this new hose generation.

Documents

EATON Hose and Fitting Presentationuvenk.com/files/from_site/HydraulicStc.pdf · 2017. 6. 26. · • What is Eaton Aeroquip’s Triple Crown Advantage? • Higher Pressure • Higher