Easylamp Osram Vip Projector Lamp

P-VIP Replacement Lamps,Subject to alteration Page: 1

DO DIS

P-VIP Replacement Lamps

pohl

EasyLamp GmbH

pohl

einfach schneller heller

http://www.reseller.easylamp.eu

P-VIP Replacement Lamps,Subject to alteration

EASYLAMP

Supreme efficiency P-VIP® and VIP® lamps

Highest quality meeting the strict quality demands of

the CE and IT industries

From leading player in the market

P-VIP Replacement Lamps Advantages

http://www.easylamp.de


EASYLAMP

Technology Discharge lamps with Mercury-halogen gas

Lamp power 100 – 250 W AC

Lumen yield > 60 lm / W

Pressure cold lamp: 100 mbar

hot lamp: up to 250 bar

Burner temperature operating: up to 1200 °C

typical cool down < 5 min.

Pre-materials

Burner Glass: ultra pure quartz glass

Electrodes: Tungsten

Reflector Glass, coated with dichroic mirror

a) Valid for P-VIP and VIP R lamps

P-VIP® Technical Aspects



EASYLAMP

P-VIP 150/1.3 E21.5ha

‘ProfessionalVideo Projection’ –high performance discharge lamp

Lamp power

Electrode gapReflector shapeElliptical or P arabolic

Reflector size

Extra Infoh: 15 kV ignition

Aftermarket

P-VIP® Lamp Naming



EASYLAMP

VIP R 150 / P16a

Video Projection’ –high performance discharge lamp

Lamp power Reflector shapeand size

After market

Reflector

P-VIP® Lamp Naming

http://www.beamerlampen.biz


EASYLAMP

Lamp P-VIP 100-120/1.0 E19.8

� Category RP� Reflector E19.8 – elliptic� Arc gap 1.0 mm� Rated power 100 – 120 W� Ignition 15-18 kV� Light output typ.a 4,200 lm @ 120 W� Average Life timeb > 6,000 h @ 120 W� Environmental Complies RoHS

a) observed in working distance through Ø 10mm round aperture

b) when operated on OSRAM lamp driver PT VIP 2AC/380 O1



EASYLAMP

Lamp P-VIP 100-120/1.0 E19.8

dimensions in mm

04:30 o‘clocklocation contact 2a

central at baselocation contact 1a

burner extends overreflector rim

air inletsborosilicateReflector glass

nofront glass109.9 mmworking distance

Lamp designE19.8 – ellipticContour

< 63.0

F2

109.957.0

57.0

rear view

top



EASYLAMP

Lamp P-VIP 250/1.3 P22a

� Category FP� Reflector P22 – parabolic� Arc gap 1.3 mm� Power range 250 W� Ignition 5 kV� Light output typ.a 7300 lm @ 250 W� Average Life timeb > 1,500 h @ 250 W� Environmental Complies RoHS

a) observed in 2400 mm distance through ∅ 160 mm aperture

b) when operated on OSRAM lamp driver PT VIP 4AC O1 (250W)


EASYLAMP

Lamp P-VIP 250/1.3 P22a

dimensions in mm


a) viewed from front


4x, on all four sidesair inletscrystallizedReflector glassyesfront glassinfiniteworking distance

Lamp designP22 – parabolicContour

< 77.070.0

65.0 front view

top


EASYLAMP

Lamp P-VIP 200/1.3 P22.5a

� Category FP� Reflector P22.5 – parabolic� Arc gap 1.3 mm� Power range 200 W� Ignition 5 kV� Light output typ.a 8000 lm @ 200 W� Average Life timeb >1,500 h @ 200 W� Environmental Complies RoHS




EASYLAMP


dimensions in mm




4x, on all four sidesair inletscrystallizedReflector glassyesfront glassinfiniteworking distance

Lamp designP22.5 – parabolicContour

< 84.080.0

80.0 front view

top


EASYLAMP

Lamp P-VIP 120-132/1.0 E22ha

� Category MD TV� Reflector E22 – elliptic� Arc gap 1.0 mm� Power range 120 – 132 W� Ignition 15 – 18 kV� Light output typ.a 5,900 lm @ 132 W� Average Life timeb > 6,000 h @ 132 W� Environmental Complies RoHS

a) observed in working distance through ∅ 6 mm aperture

b) when operated on OSRAM lamp driver PT VIP 01 RP


EASYLAMP

Lamp P-VIP 120-132/1.0 E22ha



tooled air gapsair inletsborosilicateReflector glassyesfront glass34.0 mmworking distance

Lamp designE22 – ellipticContour

< 85.0

F2

34.0

70

Top

65

A

A

A = reference edgeDimensions in mm

View from Rear

Glass air guidesnot to scale

30°


EASYLAMP

Lamp P-VIP 100-120/1.3 E23a





EASYLAMP

Lamp P-VIP 100-120/1.3 E23a

dimensions in mm




no, lamp closedair inletsborosilicateReflector glassyesfront glass52.0 mmworking distance


< 88.0

front view

95.0 F2

52.0

top


EASYLAMP

Lamp P-VIP 132-150/1.0 E22ha

� Category MD TV� Reflector E22 – elliptic� Arc gap 1.0 mm� Power range 132 – 150 W� Ignition 15 – 18 kV� Light output typ.a 6,500 lm @ 150 W� Average Life timeb 6,000 h @ 150 W� Environmental Complies RoHS




EASYLAMP





< 85.0

F2

34.0

70

Top

65

A

A


View from Rear


30°

Lamp P-VIP 132-150/1.0 E22ha


EASYLAMP

Lamp P-VIP 132-150/1.0 E23ha

� Category MD TV� Reflector E23 – elliptic� Arc gap 1.0 mm� Power range 132 – 150 W� Ignition 15 – 18 kV� Light output typ.a 6,500 lm @ 150 W� Average Life timeb 6,000 h @ 150 W� Environmental Complies RoHS


b) when operated on OSRAM lamp driver PT VIP O1RP


EASYLAMP

Lamp P-VIP 100-120/1.0 E23ha

dimensions in mm






< 88.0

front view

95.0 F2

52.0

top


EASYLAMP

Lamp P-VIP 100-120/1.3 P23a

� Category MD TV� Reflector P23 – parabolic� Arc gap 1.3 mm� Power range 100 – 120 W� Ignition 15 – 18 kV� Light output typ.a 4,400 lm @ 120 W� Average Life timeb 6,000 h @ 120 W� Environmental Complies RoHS




EASYLAMP

Lamp P-VIP 100-120/1.3 P23a

dimensions in mm




noair inletsborosilicateReflector glassyesfront glassinfiniteworking distance


< 82.0

top

front view

Max

. 96.

0

< 92.0


EASYLAMP

Lamp P-VIP 200/1.0 E17.5a

� Category FP� Reflector E17.5 – elliptic� Arc gap 1.0 mm� Rated power 200 W� Ignition 16 kV� Light output typ.a 6,300 lm @ 200 W� Average Life timeb 2,000 h @ 200 W� Environmental Complies RoHS

a) observed in working distance through 5.0 x 3.8 mm2 rectangularaperture

b) when operated on OSRAM lamp driver PT VIP 3 AC/380 O3


EASYLAMP

dimensions in mm



Side at baselocation contact 1a

noair inletsaborosilicateReflector glassnofront glass39.15 mmworking distance


< 52,0

F2

48.0

43.0

front view

top


39,15


EASYLAMP


� Category FP� Reflector E21.8 – elliptical� Arc gap 1.3 mm� Rated power 250 W� Ignition 5 kV� Light output typ.a 8.600 lm @ 250 W� Average Life timeb > 2,000 h @ 250 W� Environmental Complies RoHS

a) observed in working distance through 5.0 x 3.8 mm2 rectangular aperture



EASYLAMP



central at baselocation contact 1a67 mmLamp lenght

air gapsair inletsCristalizedReflector glassyesfront glass36.0 mmworking distance

Lamp designE21.82 – ellipticalContour

61 6


EASYLAMP

Lamp P-VIP 100-120/1.0 E23ha





EASYLAMP

Lamp P-VIP 100-120/1.0 E23ha

dimensions in mm






< 88.0

front view

95.0 F2

52.0

top


EASYLAMP

Lamp P-VIP 100-120/1.0 E22ha





EASYLAMP

Lamp P-VIP 100-120/1.0 E22ha





< 85.0

F2

34.0

70

Top

65

A

A


View from Rear


30°


EASYLAMP


� Category FP� Reflector P21.5 – parabolic� Arc gap 1.0 mm� Power range 150 W� Ignition 5 kV� Light output typ.a 5,300 lm @ 150 W� Average Life timeb 1,500 h @ 150 W� Environmental Complies RoHS




EASYLAMP


dimensions in mm




4 x, on all four sidesair inletscrystallizedReflector glassyesfront glassinfiniteworking distance


< 73.056.0

52.0 front view

top


EASYLAMP

Lamp P-VIP 100-120/1.3 E23ha





EASYLAMP

Lamp P-VIP 100-120/1.3 E23ha

dimensions in mm






< 88.0

front view

95.0 F2

52.0

top


EASYLAMP

Lamp P-VIP 100-120/1.0 P22ha

� Category MD TV� Reflector P22 – parabolic� Arc gap 1.0 mm� Power range 100 – 120 W� Ignition 15 – 18 kV� Light output typ.a 3,800 lm @ 120 W� Average Life timeb > 6,000 h @ 120 W� Environmental Complies RoHS




EASYLAMP

Lamp P-VIP 100-120/1.0 P22ha

dimensions in mm




no, lamp closedair inletsborosilicateReflector glassyesfront glassinfiniteworking distance


< 82.070.0

65.0 front view

top


EASYLAMP

Lamp P-VIP 120-132/1.0 P22ha

� Category MD TV� Reflector P22 – parabolic� Arc gap 1.0 mm� Power range 120 – 132 W� Ignition 15 – 18 kV� Light output typ.a 4,500 lm @ 132 W� Average Life timeb > 6,000 h @ 132 W� Environmental Complies RoHS


b) when operated on OSRAM lamp driver PT VIP O1 RP 132


EASYLAMP

Lamp P-VIP 120-132/1.0 P22ha

dimensions in mm




1 x TOP, 1 x BOTTOMair inletsborosilicateReflector glassyesfront glassinfiniteworking distance


< 82.070.0

65.0 front view

top


EASYLAMP

Lamp VIP R 120/P12a

� Category FP� Reflector E18 – elliptic� Arc gap 1.0 mm� Rated power 120 – 132 W� Ignition 5 kV� Light output typ.a 4,900 lm @ 132 W� Average Life timeb > 3,000 h @ 132 W� Environmental Complies RoHS


b) when operated on OSRAM lamp driver PT VIP 120AC/100-240 Q1


EASYLAMP

Lamp VIP R 120/P12a

dimensions in mm





air inletsborosilicateReflector glass

nofront glass26.6 mmworking distance


< 45.0

F2

26.6

< 3.5

48.0

43.7

front view

top


EASYLAMP

Lamp VIP R 120/P16a

� Category FP� Reflector P16 – elliptic� Arc gap 1.0 mm� Rated power 120 W� Ignition 20 kV� Light output typ.a 4,400 lm @ 120 W� Average Life timeb >1,500 h @ 120 W� Environmental Complies RoHS


b) when operated on OSRAM lamp driver PT VIP 120AC/100-240 H


EASYLAMP

Lamp VIP R 120/P16a

dimensions in mm

SMK 101CCT-92-01 maleHV plug

70/100 mm leads with plugattached to lamp

HV contacting1 x left, 1 x rightair inletsborosilicateReflector glassfront cap incl. front glassfront glass26.0 mmworking distance

Lamp designP16 – ellipticContour

< 70.0

F2

26.0

front view

top

47.8

49.7


EASYLAMP

Lamp VIP R 150/P16a

� Category FP� Reflector P16 – elliptic� Arc gap 1.3 mm� Rated power 150 W� Ignition 20 kV� Light output typ.a 5,200 lm @ 150 W� Aaverage Life timeb >3,000 h @ 150 W� Environmental Complies RoHS


b) when operated on OSRAM lamp driver PT VIP 150AC/100-240 H2


EASYLAMP

Lamp VIP R 150/P16a

dimensions in mm


70/100 mm leads with plugattached to lamp

HV contacting1 x left, 1 x rightair inletsborosillicateReflector glassfront cap incl. front glassfront glass26.0 mmworking distance

Lamp designP16 – ellipticContour

< 70.0

F2

26.0

front view

top

47.8

49.7


EASYLAMP


� Category FP� Reflector E21.5 – elliptic� Arc gap 1.3 mm� Rated power 150 W� Ignition 16 kV� Light output typ.a 5,500 lm @ 150 W� Average Life timeb > 2,500 h @ 150 W� Environmental Complies RoHS




EASYLAMP


dimensions in mm




slot on left sideair inletsaborosilicateReflector glassyesfront glass17.3 mmworking distance


< 76.5

F2

17.356.0

52.0 front view

top


EASYLAMP

Lamp VIP R 150/P22a

� Category FP� Reflector P22 – parabolic� Arc gap 1.3 mm� Power range 150 W� Ignition 16 kV� Light output typ.a 3800 lm @ 150 W� Average Life timeb 1000 h @ 150 W� Environmental Complies RoHS




EASYLAMP

Lamp VIP R 150/P22a

dimensions in mm




no, lamp closedair inletsborosilicateReflector glassyesfront glassinfiniteworking distance


< 82.070.0

65.0 front view

top


EASYLAMP

Lamp P-VIP 180/1.0 E20a

� Category FP� Reflector E20 – elliptic� Arc gap 1.0 mm� Rated power 180 W; Dimm: 156 W� Ignition 5 kV� Light output typ.a 6,800 lm @ 180 W� Average Life timeb >3,000 h @ 180 W� Environmental Complies RoHS




EASYLAMP


dimensions in mm


100/100 mm leads withplug attached to lamp

HV contacting1 x left, 1 x rightair inletsborosilicateReflector glassfront cap incl. front glassfront glass26.0working distance


< 70.0

F2

26.0

front view

top

47.8

49.7


EASYLAMP


� Category FP� Reflector P21.5 – parabolic� Arc gap 1.0 mm� Power range 200 W, Dimm: 160W� Ignition 5 kV� Light output typ.a 8,000 lm @ 200 W� Average Life timeb 1,500 h @ 200 W� Environmental Complies RoHS




EASYLAMP


dimensions in mm




4 x, on all four sidesair inletscrystallizedReflector glassyesfront glassinfiniteworking distance


< 73.056.0

52.0 front view

top


EASYLAMP


� Category FP� Reflector E19 – elliptic� Arc gap 1.0 mm� Power range 200 W� Ignition 2.5 – 5 kV� Light output typ.a 8,200 lm @ 200 W� Average Life timeb 2,500 h @ 200 W� Environmental Complies RoHS


b) when operated on OSRAM lamp driver PT VIP O3 MID 200


EASYLAMP


dimensions in mm





air inletscrystallizedReflector glassnofront glass37.7 mmworking distance


< 42.546.0

46.0

F2

37.7

< 13.5

rear view

top


EASYLAMP


� Category FP� Reflector E21.8 – elliptical� Arc gap 1.3 mm� Rated power 300 W� Ignition 5 kV� Light output typ.a 10000 lm @ 300 W� Average Life timeb > 2,000 h @ 300 W� Environmental Complies RoHS




EASYLAMP



01:30 o‘clocklocation contact 1a69 mmLamp lenght

air gapsair inletsCristalizedReflektor glassnofront glass36.0 mmworking distance

Lamp designE21.8 – ellipticalContour

63 6


EASYLAMP

P-VIP Instruction for Use

For lamp replacement

� switch off power,

� disconnect mains supply,

� disconnect power cord,

allow lamp to reach room temperature.

This P-VIP lamp

operates at high pressure and at high temperature a nd may

unexpectedly shatter.

generates ultraviolet radiation which may cause ski n and

eye irritation with prolonged exposure.

must be operated only in suitably designed, enclose d fixtures which

prevent direct observation of the arc and will pre vent lamp fragments

from exiting, in the unlikely event of a lamp ruptu re.


EASYLAMP


Do not touch the lamp with bare hands.

If necessary, lamp can be cleaned with lint free to wel

before operation.

Protect lamp environment against high ignition puls es

Front projection max. 8 kV and rear projection max. 23 kV

Avoid direct contact of objects to reflector cover glass.

This lamp must not be operated with a broken, crack ed

or loose reflector or cover glass.

Fast on-off-cycles will reduce lamp life ( 10 min o n/off)

Operate lamp only in accordance with UL 1950 regula tions.

Avoid back-reflection of light into burner.


EASYLAMP


Disposal

For disposal of spent lamps, always consult federal , state, local and

provincial hazardous waste disposal rules and regul ations to ensure

proper disposal.

Caution

This lamp emits ultra violet (UV) radiation and ope rates at high pressure.

This lamp may only be used in enclosed fixtures tha t comply with

UL1572. Due to the high luminous efficacy, the UV r adiation which the

lamp emits and the high pressure within the lamp, P -VIP lamps may

only be operated within enclosed, purpose-built hou sings.

Documents

Easylamp Osram Vip Projector Lamp