Upload
mervin-page
View
231
Download
7
Embed Size (px)
Citation preview
easyDATA ProfessionaleasyDATA Professional
Data Capture and Analysis
Reads data from coin mechanisms and vending machine control units
Laser scanner for inventory management Tailored to the needs of the vending industry Continuously adapted to the requirements and
specific features of leading manufacturers Infrared and IrDA standards RS232, TTL and analog interfaces all in one Internal extension slot
easyDATA Professional
easyDATA Professional
Easy to operate, evenwithout training
Absolutely safe andsecure data storage
Simple and trouble-free
Bar-code extension enablesinventory management
Easy Operation
Data export procedure:
Either:connect device
Or:Point easyDATA at the data interface and press “ON“
Red LED remains lit while data is being exported
Wait until light goes off
Done.
Special Features:
Automatic Interface Control (AIC)
Ensures data-interface compatibility with almost all devices on the market
Provides for future extensions
Adapted to state-of-the-art technologies
“Future-proof“ and expandable hardware still supports the requirements of older vending machines (not often the case with data export devices)
Bar code laser scanner available
easyDATA Professionaland Bar Codes
Supports complete inventory management
Quality laser scannerintegrated into the device, thus enabling distance readings
Exceeds the quality of conventional CCD bar code readers by far using a laser scanner
Descriptions of scanned products stocked in machines can be shown on the display
Simple and trouble-free
Bar Codes:An Efficient Concept
1. A bar code sticker showing the machine‘s unique ID is placed in each vending machine
2. The route person logs on to the vending machine
3. If necessary, data is read out from the coin mechanism (vending machine control unit)
4. Stocked products are then read
5. Problems and malfunctions can be captured if required
6. The route person then logs off the specific vending machine
Data entry errors can be reversed easily using correction bar codes
Bar Codes:An Efficient Concept
Advantages Exact entry of merchandise stocked/removed
Assignment of products to each vending machine (location)
The route driven by the route person can be traced precisely using the bar codes captured
The easyDATA clock provides easy and reliable time records.easyDATA records the exact login/logoff time at each vending machine
The time spent at each machine and travel time are thus also recorded
Recurring malfunctions can be detected easily using evaluation software
Functions & Features
Handling designed to minimize training requirements and ensure error-free operation even by untrained users
Real-time clock can not be changed by user
Integrated, high-quality bar-code laser scanner for merchandise management
Various interfaces
Crucial data is stored safely and securely in FLASH memory
Functions & FeaturesInterfaces / Protocols:
9-pin D-Sub for RS232 printer output
NRI printer emulation
NRI G26 Höfer mode using plug-in connection or IR
G46 DDCMP using plug-in connection or IR
Mars Cashflow DDCMP using plug-in connection or IR
DEX/UCS using adapter cable (IR available)
Standard infrared DDCMP (Eva-Dts, Vidts) supporting a wide variety of coin mechanisms and vending-machine control units
IRDA infrared DDCMP (Eva-Dts 5.0)
Functions & FeaturesInterfaces / Protocols:
FAGE protocol using infrared
Flexible programming of D-Sub plug, capable of simulating virtually all common interfaces
Various custom settings, e.g. export of data from Rhea vending machine control units
Transfer of completed coin settings/vending machine settings with Eva-Dts, Höfer and DEX/UCS - considerable time savings
Bar codes (laser scanner for distance readings)
Inventory management possible using bar codes
Supports Quick payment modules
Examples
Printer emulation: Mars Electronics Mars 1900, CF 560, CF 690, NRI G26 and G46, Azkoyen, Wittenborg Junior and Mariner, FAS, Wurlitzer, etc.
Höfer protocol: Vendo, AHT, NRI G26, etc.
Eva-Dts Ddcmp: Mars Electronics CF560, CF690, NRI G46, Silaff, FAS, FAGE, Vendo, Wittenborg, etc.
Dex/Ucs: Vendo, CoinCo, etc.
Eva-Dts IrDA: Rhea, FAS, etc.
Printer emulation via IrDA: Vendo BB01-4
Special protocols: Rhea XS, Sagoma, Dex via IrDA, etc.
Audit module required
Software Features Convergence of various
data formats in a standardized form
Re-conversion into Eva-Dts, thus allowing printout and Höfer to be output to Eva-Dts
Freely definable output fields
Standard import function for Excel and Access
Customer-specific adaptation possible
Inventory management possible using bar codes
Software -Special adaptations
Software can be adapted to customer‘s specific needs
Enables special merchandise management processes
Supports extensions such as GSM data transfer
Summary easyDATA Professional:
Merchandise management / Bar codes supported
Interfaces: IrDA, IR, RS232, TTL-RS232, analog interface, Automatic Interface Control (AIC)
IR (ASK 34kHz) and IrDA
TTL – RS232
Auto-detection of baud rate (110–1200 baud) for NRI
Facilitates hardware extensions
Tried and tested in the vending industry
Developed specifically for the requirements of the vending industry and continuously adapted to market-leading manufacturers and specific features
Thank you for your attention
interTronic Innovations GmbHSchiller Strasse 661
A-3571 Gars am Kamp, Austria
Sales: