Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
GET THE SOLUTION FOR YOUR JOBFollow our easy guide to ensure you are selecting the right product for your application.
nzsafetyblackwoods.co.nzSHOP ONLINE NOW
UTILITIES AND INFRASTRUCTURE
LOGISTICS AND WAREHOUSING
DESCENT AND RESCUE
MANUFACTURING, ENGINEERING AND WELDING
CONSTRUCTION AND MAINTENANCE
FALL PROTECTION
EASY GUIDE
WORKING AT HEIGHT IS A RISK THAT IMPACTS MANY WORKPLACES - NOT ONLY ABOVE GROUND LEVEL BUT THOSE WORKING BELOW THE GROUNDIt is a priority to keep all staff, visitors and contractors safe in the workplace, based on best practices, compliance to standards, PPE equipment, training, testing (understand expiry dates) and fostering self-ownership.
Investigations by the Ministry of Business, Innovation and Employment into "falls while working at height" show that more than 50% of falls are from less than three metres and approximately 70% of falls are from ladders and roofs.
Contributing factors to injury or death when working at height include:
• Lack of adequate planning and hazard assessment
• Inadequate supervision
• Insufficient training for the task being carried out
• Incorrect protection and equipment choices
• Incorrect use or set-up of equipment including personal protective equipment
• Unwillingness to change the way a task is carried out when a safer alternate is identified
• Suitable equipment being unavailable.**Sourced from the Worksafe website and subsequently referenced in the Best Practice Guide for Working at Height in NZ.
Anchorage is a secure point of attachment (structure) for a fall arrest system. Devices can be temporary or permanent
A full body harness provides a connection point on the worker for the personal fall arrest system. There are many types, aimed at protecting the worker against harm
Connectors are devices used to connect the worker’s full body harness to the anchorage system eg: lanyard, SRL, etc.
Rescue & retrieval of a fallen worker is a required component of any fall arrest system eg: rescue kit, tripod, etc.
A - ANCHORAGE B - BODY HARNESS
C - CONNECTOR D - DESCENT/RESCUE
ALL HEIGHT SAFETY SYSTEMS SHOULD INCORPORATE THE 4 BASIC ELEMENTS OF SAFETY WHEN WORKING AT HEIGHT
nzsafetyblackwoods.co.nz0800 660 6602
CONSTRUCTION AND MAINTENANCE
A - ANCHORAGE
B - BODY HARNESS
C - CONNECTOR
PROTECTA PRO-LINE TEMPORARY HORIZONTAL LIFELINE KIT• 18m temporary static lifeline and 50mm wide webbing• Built-in shock absorber reduces anchorage loading
to preserve the structure• Rated for two people
CODE 407789
GRIP ANCHORAGE FALL ARREST
CODE 428089
SHARP EDGE ANCHORAGE LINES
CODE 407294 - 15M 407295 - 30M
P50 CONSTRUCTION HARNESS • Side work positioning D-ring• Tongue buckle chest and leg connectors• Parachute torso adjusters
CODE 420146
EXOFIT NEX™ RIGGERS HARNESS • Confined space retrieval attachment points
for raising and lowering• Large rear rated spring loaded stand up D-ring
CODE 405962
P200 RIGGERS HARNESS W/PADDING• Quick connect buckles• Auto reset lanyard keepers• Comfort padding
CODE 425897
P50 ROOF WORKERS KIT• Industrial rigger harness• 15m rope lifeline 1.0m integral shock
absorbing lanyard• 1.5m round anchor strap, 15kN
CODE 401720
FALL ARREST HARNESS• Visible polyester webbing• Large rear D-ring
CODE 428090
AIRCORE™ CONSTRUCTION HARNESS• Quick connect• Confined space web loops
CODE 410456
NANO LOK TWIN LEG 1.8M
CODE 407989
2M TURBOLITE EDGE TYPE FALL ARRESTOR• Twin webbing with steel scaffold hooks
CODE 428093
2M TURBOLITE EDGE TYPE FALL ARRESTOR• Webbing single snap hook
CODE 428094
P50 ADJUSTABLE WEB LANYARD 2M
CODE 420149
PROTECTA SHOCK ABSORB ELASTICATED LANYARD
CODE 436647
Applications: Construction, building, scaffolding, painting, maintenance, waterblasting, roof installation etc.
Can also be purchased as a kit CODE: 420153 with anchor, industrial harness and connectors included
3
UTILITIES AND INFRASTRUCTURE
A - ANCHORAGE
B - BODY HARNESS
C - CONNECTOR
DBI-SALA 1.5M TIE-OFF ADAPTER• Lightweight and high strength rated to
22.2kN for personal use• Extra heavy duty - wide integral wear pad
provides abrasion resistance and extends product life
CODE 500597
P200 Y-BACK UTILITY HARNESS • Adjustable padded seat• Shoulder strap to reduce load on worker, enabling better
range of movement
CODE 436650
DBI-SALA SINGLE POINT ANCHOR • Suited to steel or concrete fixing• Stainless steel construction• Rated to 15kN - 1 person
CODE 429087
P200 ALL PURPOSE HARNESS WITH PADDING • Quick connect buckles• Auto-resetting lanyard keepers• Softer and more durable hip padding
CODE 425898
AIRCORE™ CONSTRUCTION HARNESS• Quick connect• Confined space web loops • DuraClean coating repels water, oil and dirt
CODE 410456
2.75M TURBOLITE SCAFF HOOK• Single wire snap hook
CODE 428095
2M TURBOLITE EDGE TYPE FALL ARRESTOR• Webbing twin steel scaff hooks
CODE 428093
TOWER WORKER HARNESS• Loops for attaching to spreader bar• Back and lumbar padding -
Quick release buckles
CODE 407828
2M TURBOLITE EDGE TYPE FALL ARRESTOR• Webbing single snap hook
CODE 428094
DBI-SALA ADJUSTABLE ROPE POLE STRAP• 2.5m adjustable• Double action alloy snap hook and double action steel karabiner• 11mm diameter static kernmantle rope,
high visibility yellow and black fleck
CODE 410650
DBI-SALA WEBBING POLE STRAPS• Protective heavy duty integral wear sleeve • Alloy double action snap hooks
CODE 404126
NEW
Applications: Utilities maintenance and repair, roading, shipping, towers, lineswork, wind turbine, silos, cranes and arborist, etc.
nzsafetyblackwoods.co.nz0800 660 6604
MANUFACTURING, ENGINEERING AND WELDING
DBI-SALA 1.5M TIE-OFF ADAPTER• Lightweight and high strength rated to 22.2kN
for personal use• Extra heavy duty - wide integral wear pad
provides abrasion resistance and extends product life
CODE 500597
DBI-SALA FIXED ANCHOR• Suitable for steel or concrete fixing• Stainless steel• Rated to 21kN - 2 persons
CODE 429086
P200 WELDERS HARNESS• Quick connect buckles• Rear fall arrest D-ring• Adjustable chest strap
CODE 425900
FALL ARREST HARNESS• Large rear D-ring• Vest style for easy donning and adjustability• Lightweight for all day use
CODE 428090
WELDERS HARNESS• Flame retardant kelvar webbing• Adjustable leg and shoulder straps• Front & rear attachments
CODE 428091
PROTECTA PRO 2M WELD LANYARD• Shock absorbing• Kevlar fire webbing• Single tail with snap hook
and scaffold hook on tail
CODE 411345
PROTECTA PRO 2M LANYARD• Shock absorbing• Adjustable from 0.75-2.0m• Single tail with snap hooks
CODE 402993
PROTECTA PRO 2M ADJUSTABLE LANYARD• Shock Absorbing• Adjustable from 0.75-2.0m• Single tail with snap hooks to harness and
scaffold hook to anchor
CODE 422108
DBI-SALA EXOFIT NEX RIGGER HARNESS• With front and rear Tech-Lite aluminium D-rings• Duo-Lok quick connect bucklers• Revolver vertical torso adjusters• Confined space loops• Impact Indicator
CODE 405962
Applications: Food processing, air conditioning and ventilation, workshops, plumbing, high walkways or industry specific like boat building, fabricators, installers and more
2M TURBOLITE EDGE TYPE FALL ARRESTOR• Twin webbing with steel scaffold hooks
CODE 428093
2M TURBOLITE EDGE TYPE FALL ARRESTOR• Webbing single snap hook
CODE 428094
A - ANCHORAGE
B - BODY HARNESS
C - CONNECTOR
5
LOGISTICS AND WAREHOUSINGMANUFACTURING, ENGINEERING AND WELDING
DBI-SALA 1.5M TIE-OFF ADAPTER• Lightweight and high strength rated to
22.2kN for personal use• Extra heavy duty
CODE 500597
PROTECTA FIRST ANCHOR STRAP 2M• Round webbing• Rated 15kN
CODE 420151
P50 INDUSTRIAL HARNESS• Fall forces are distributed over the upper thighs,
pelvis, chest and shoulders• Attachment point included• Front and rear fall arrest rated D-ring• Adjustable leg, chest and pelvic straps
CODE 420145
DBI-SALA EXOFIT NEX RIGGER HARNESS• With front and rear Tech-Lite aluminium D-Rings• Duo-Lok quick connect bucklers• Revolver vertical torso adjusters• Confined space loops• Impact Indicator
CODE 405962
AIRCORE™ CONSTRUCTION HARNESS• Quick connect• Confined space web loops
CODE 410456
FALL ARREST HARNESS• Visible polyester webbing• Lightweight
CODE 428090
DURAFLEX MAINTENANCE HARNESS• Easy fit with adjustable straps• Extended dorsal D-ring
CODE 403798
PROTECTA REBEL PERSONAL SRL• 25mm polyester web with steel snap hook,
swiveling anchorage and Karabiner• Self-locking steel snap hook on lifeline• Tough and impact resistant thermoplastic housing• Quick activating speed sensing brake system
CODE 415291 - 6.0M 415290 - 3.3M
2M TURBOLITE EDGE TYPE FALL ARRESTOR• Webbing twin steel scaff hooks
CODE 428093
NANO-LOK™ SELF RETRACTING LIFELINES• Ergonomically designed for ease-of-use• Available in 1.8m working length• Quick-connect anchorage connector (single or twin
leg) for direct connection to the harness without the requirement for a separate karabiner
CODE 407987
2M TURBOLITE EDGE TYPE FALL ARRESTOR• Webbing single snap hook
CODE 428094
Applications: Workers on scissor lifts, pallet lifts, forklifts, working off the back of trucks, installing racking and much more
A - ANCHORAGE
B - BODY HARNESS
C - CONNECTOR
nzsafetyblackwoods.co.nz0800 660 6606
DESCENT AND RESCUE
SHARP EDGE ANCHORAGE LINES• 12mm sharp edge kernmantal rope• With karabiner and snap hook
CODE 407294 - 15M 407295 - 30M
EXOFIT NEX™ CONFINED SPACE HARNESS • Non-slip hybrid comfort padding on shoulders,
back, legs and hip• Large rear fall arrest rated stand-up Tech-Lite™
aluminum D-ring• Waist belt with
large side Tech-Lite™ aluminium D-rings
CODE 405961
TRIPOD OPTIONAL PULLEY• Split pulley anchorage device• Use in conjunction with Miller Tripod
CODE 500600
DELTA™ RIGGERS HARNESS• Ideal for use in rigging, confined space,
ladder acess and general height safety• Front fall arrest D-ring, quick connect
buckles, confined space loops, REPEL technology webbing
CODE 407784
MILLER CONFINED SPACE HARNESS• Included loops for spread bar• Rear D-ring and 300mm
extension with soft-eye-D
CODE 817562
DBI-SALA EMERGENCY RETRIEVAL SEALED BLOK SRLCODE 415132 - 15M 03184652 - 25M
DBI-SALA ROLLGLISS R550 RESCUE KIT WITH POLE CODE 410667 - 20M 410668 - 40M 410669 - 60M
DBI-SALA SALALIFT II WINCH• With 18m of 6mm galvanised cable• 6-1 gear ratio
CODE 500605
DBI-SALA ULTRA-LOK RSQ SRL• Built in rescue capability• 15m of 5mm
stainless steel cable
CODE 405973
FALCON™ SELF RETRACTING LIFELINE• 6m cable, available in other lengths
CODE 402117
SAFESCAPE™ ELITE RESCUE DESCENDER• 80m• Descents up to 500m• Rated for 2 persons
CODE 405615
Applications: Retrieving a worker after a fall, whether through a gap or weak surface, over an edge, trip or slip down a slope or within a confined space like a silo or drains
A - ANCHORAGE
B - BODY HARNESS
C - CONNECTOR
7
DESCENT AND RESCUE
DBI-SALA DAVIT SYSTEM 5PC SHORT REACH
• Manhole and confined space entry retrieval applications• Lower base adjusts to fit most standard entries• Made from lightweight materials including
high strength aluminium
CODE 423490
DBI-SALA DAVIT SYSTEM 5PC LONG REACH
• Manhole and confined space entry/retrieval applications• Lower base adjusts to fit most standard entries• Made from lightweight materials including
high strength aluminium
CODE 423491
TRIPOD 2.92M• Strong aluminium tripod• Provides 22kN anchor, vertical pull• Available 2.26m
CODE 894915 - 7FT TRIPOD - 2.26M 896284 - 9FT TRIPOD - 2.92M
RESCUE MASTER KIT• Pulley system• 11mm kernmantle
CODE 500083
New Zealand conforms to the Australian Standard for Personal Protective Equipment (PPE) for working from height. The last update was 28th August 2020. The changes are assigned three sections.
AS/NZS 1891.1:2020 Personal equipment for work at height – Full body combination and lower body harnesses
AS/NZS 1891.1: 2007 Industrial Fall-Arrest Systems and Devices - Harnesses and ancillary equipment *
AS/NZS 1891.2:2001 Industrial fall-arrest systems and devices – Horizontal lifeline and rail systems
AS/NZS 1891.3:2020 Personal equipment for work at height – Fall-arrest devices
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices – Selection, Use and Maintenance
AS 1891.5:2020 Personal equipment for work at height – Lanyard assemblies and pole straps
AS/NZS 5532:2013 Manufacturing requirements for single-point anchor device used for harness-based work at height.
* Note: AS/NZS 1891.1: 2007 will run alongside AS/NZS 1891.1:2020 and AS 1891.5:2020 for the foreseeable future until the transition is completed there is no timeline on this. All currently AS/NZS 1891.1: 2007 Can be used for the 10-year life as per the date of manufacture providing it is still serviceable and passes regular inspections out lined in the standards and best practice guidelines.
STANDARD 2020/2021
SIZE CHART Whether you wear a harness for 4 hours a day or 14 hours a day, proper fit is essential. The harness needs to feel good and fit right for optimum comfort, safety and productivity. 3MTM manufactures harnesses that are designed to fit most body sizes or shapes (S – XL) under the brands of DBI-SALA® and Protecta®.Weight limit:160kg.
Wai
st in
Cen
tim
etre
s
Weight in Kilograms
Extra Large
Large
Medium
Small
150
145
140
135
130
125
120
115
110
105
100
95
90
85
80
75
70
65
60
55
50
40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135
D - DESCENT/RESCUE
SIZE CHART
nzsafetyblackwoods.co.nz 0800 660 660
Call now to book a course
0800 967 572
ASSESS, TRAIN & EQUIPWe provide NZQA accredited courses to equip workers with the necessary knowledge to ensure they maintain a safe and compliant workplace under the Health and Safety at Work (Hazardous Substances) Regulations 2017.
Training is essential for work in confined spaces
Our practical training courses include:• Plan a Confined Space Entry
• Confined Space Hazards
• Atmospheric Testing
• Perform Gas Tests for Energy and Chemical Plants
HARNESSES & LANYARDS SHOULD BE INSPECTED & LOGGED EVERY SIX MONTHS*We provide inspections and servicing to meet your equipment requirements.
• Fall protection• Confined space access• Gas detection
*As per AS/NZS 1891.4
Call 0800 832 732
WE INVEST TIME & EXPERTISEOur approach goes far beyond simply supplying safety
products. We invest time and expertise so we can share
our broad depth of knowledge with our customers. We
want to equip you with the knowledge in our shared aim;
that every employee, contractor and visitor returns home
healthy and injury free.
It’s what we refer to as our ‘assess, train, equip'’ model.
At each stage of the process, we collaborate with clients
to ensure they get the right product, technical knowledge,
and training, at the right time.
ASSESS
We work with customers to understand the specific hazards
they face. Drawing on the knowledge of our technical team,
we share the expertise needed to review, test and manage
safe work practices. Where stock is critical and time is limited,
we can provide streamlined solutions using smart technology
to help you better manage inventory, reduce cost, free-up
capital and improve productivity.
TRAIN
NZ Safety Blackwoods Worksafe Training is registered by
the New Zealand Qualifications Authority (NZQA) as a private
training establishment and has been delivering specialist training
focused on health, safety and the environment since 1993.
We deliver cost-effective courses suitable for all employees
– front line workers, supervisors, managers and company
owners – from structured NZQA Unit Standard courses to
customised on-site training.
Our dedicated training venues in Auckland, Tauranga,
Wellington and Christchurch are well equipped with
classrooms and purpose-built facilities to provide technical
training where workplace conditions can be replicated in a
safe, controlled environment.
EQUIP
Our global sourcing expertise and capability coupled with
longstanding relationships with market leading manufacturers
throughout the world, ensures our customers are provided with any
best-practice developments and innovations in the safety space.
With fit-for-purpose product selection guidance, sourcing, delivery
and post purchase support in line with applicable standards, we
have everything you need to get the job done safely, and if we don’t
have it, we can get it.