Upload
banmallik
View
217
Download
0
Embed Size (px)
Citation preview
8/2/2019 Dynamic Demand Devices
1/10
DYNAMIC DEMAND DEVICES
BY
B.A.N.Mallikharjun(08331A0220)EEE(4/4)
UNDER ESTEEMEDGUIDENCE OF :
Sri N.Tejeswa RaoSri M.Venumadav
8/2/2019 Dynamic Demand Devices
2/10
DYNAMIC DEMAND
Dynamic demand is a technology thatcan be incorporated into electrical
appliances and light industrial plant whichenables them to provide important servicesto the power grid such as peak loadmanagement and second-to-second
balancing of supply and demand.
8/2/2019 Dynamic Demand Devices
3/10
NECESSITY
Generally the peak load on the grid ocuurs in between
6pm everyday. there are continuous smaller fluctuations whichare essentially random. And there is also always the possibilitythat a sudden large fluctuation could occur at any time if apower line or generating station fails.
For these reasons, the National Grid pays for reservewhich involves certain power plants running at reduced outputso they are able to inject extra power into the grid as it isneeded. The National Grid also has to pay for some of thesegenerators to go into a special "response" mode whereby they
continually change their power output to respond to randomchanges in demand.
These so called "ancillary services" are expensive.Response alone costs in excess of 80m per year and is likelyto increase in price.
8/2/2019 Dynamic Demand Devices
4/10
TECHNOLOGY
The process may involve turning down or off certain appliance forthis a grid frequency measuring device is connected to the appliance
Almost it costs about 5.
For example, heating may be turned down or air conditioning orrefrigeration may be turned up (turning up to a higher temperature usesless electricity), delaying slightly the draw until a peak in usage haspassed
It was recently announced that electric refrigerators will be sold inthe UK fitted with a frequency sensing device which will delay or advancethe cooling cycle based on monitoring grid frequency
8/2/2019 Dynamic Demand Devices
5/10
A clothes dryer using a demand response switch to reduce peakdemand
http://en.wikipedia.org/wiki/File:Dryer_with_smart_load_control_switch.jpg8/2/2019 Dynamic Demand Devices
6/10
BENEFITS
If dynamic demand control is successful, the benefitscould be considerable:A more efficient power grid.A more stable power grid.
The creation of new sustainable businesses.Significantly reduced carbon-dioxide emissions
from power generation.Removal of some of the barriers to a higher
proportion of renewable energy.A reduction in the cost of renewable energy.
8/2/2019 Dynamic Demand Devices
7/10
BUT IT IS CHALLENGE?
Although in theory the technology could earn money fromthe services it provides to power system operators, inpractice this money is not yet accessible
current regulations and institutional policies of Government
are geared towards the traditional ways of providingancillary services, namely through large generators.
Lake of publicity and knowledge over the technology
8/2/2019 Dynamic Demand Devices
8/10
CONCLUSION
8/2/2019 Dynamic Demand Devices
9/10
REFERANCES
http://www.dynamicdemand.co.uk/
http://en.wikipedia.org/wiki/Demand_response
http://www.dynamicdemand.co.uk/http://en.wikipedia.org/wiki/Demand_responsehttp://en.wikipedia.org/wiki/Demand_responsehttp://www.dynamicdemand.co.uk/8/2/2019 Dynamic Demand Devices
10/10
Name: B.A.N Mallikharjun