DVB/MPEG-2 & GRAPHIC CONTROLLER PRODUCTS · DVB/MPEG-2 & GRAPHIC CONTROLLER PRODUCTS ... MPEG-2 Encoder ... capacitance and inductive elements. This means that the only

Contents

T H E P O S S I B I L I T I E S A R E I N F I N I T E

Contents

▲

Home Products Contacts

MULTIMEDIA SOLUTIONS

DVB/MPEG-2 & GRAPHICCONTROLLER PRODUCTS

PRODUCT OVERVIEW

http://www.fme.fujitsu.com

http://www.fme.fujitsu.com/products/index.html


Forward

▲▲Back


�Introducing Business Unit Multimedia

�Business Unit Multimedia at FujitsuMicroelectronics

�Front-End for Digital Satellite Television

�MPEG-2 Decoder for Digital Television

�MPEG-2 Encoder

�Introduction to Graphic Display Controllers

�MB86290A ‘Cremson’

�MB86291 ‘Scarlet’

�MB86292 ‘Orchid’

�MB87P2020 ‘Jasmine’

�MB86293 ‘Coral Q’

�MB86294 ‘Coral B’

�MB86295 ‘Coral P’ & MB86296 ‘Coral PA’

�MB862xx ‘Lime’

�Product Roadmap

�Evaluation Boards

�Graphic Controller Comparison Tables




Forward

▲▲Back


Contents

INTRODUCING BUSINESS UNIT MULTIMEDIAFujitsu Microelectronics Europe’sBusiness Unit Multimedia, based atthe company’s headquarters inFrankfurt, Germany, offerscustomers advanced multimediaproducts for digital TV and set-topboxes as well as graphic displaycontrollers for such applications ascar navigation, mobile terminalsand industrial applications.In addition to the range of productsoffered by the Business UnitMultimedia, an experiencedsupport & development team is inplace to work closely withcustomers on their multimediasystems projects.

Fujitsu Microelectronics Europeis a major supplier ofsemiconductor products to theEuropean and global market. Thecompany’s main business focus ison providing systems solutions to

the networking/telecommunications,mobile communications, automotiveand multimedia markets.

Fujitsu offers a broad range ofsemiconductor devices, includingtelecommunications ICs, RF devices,MPEG encoders & decoders,microcontrollers, graphic displaycontrollers, microprocessors andFCRAMTM. The company is also aleader in colour plasma display andLCD panels.

Fujitsu Microelectronics Europe’s headquarters inDreieich-Buchschlag near Frankfurt, Germany. The company has offices in Munich, Paris, Milanand Maidenhead

MaidenheadRegional Office & Mixed Signal Division

LevalloisRegional Office & FRAM Design Centre

MünchenRegional Office & ASIC Design Centre

MilanRegional Office

Dreieich-BuchschlagFujitsu Microelectronics EuropeHeadquarters - ASIC, MCU, RF andMultimedia Design Centres




Forward

▲▲Back


Contents

BUSINESS UNIT MULTIMEDIA AT FMEAt the heart of Fujitsu’s BusinessUnit Multimedia is its developmentcentre in Frankfurt, which designsand supports semiconductormultimedia solutions, calling on theskills and expertise located in otherFujitsu design centres in Europe. The MPEG-2 decoder for digitaltelevision, SmartMPEG, wasdesigned here, a complete APIlibrary was created, referencedesigns are available andcustomers are using it successfully in their digital TV products, such asset-top boxes. The SmartMPEG isthe third generation MPEG-2decoder for set-top boxapplications and is especiallydesigned to reduce system cost ofthe end-product.

A Fujitsu API software library isavailable, which enables thecustomers a fast and easy

implementation of the SmartMPEGinto their products. The Centre has aset of resources on call, for bothhardware and software development.

The support group assistscustomers to design-in multimediacomponents into their end-products.

The following components areoffered from the Business UnitMultimedia:

● Single-package front-end solutions for digital satellite television

● MPEG-2 decoders for set-top boxapplications

● Single-chip MPEG-2 encoders including audio encoders, video encoders & system multiplexers

● Graphic display controllers for embedded solutions

A car infotainment system using Fujitsu Multimedia components

For complex components, theBusiness Unit Multimedia can alsosupply development kits tocustomers. These kits include anevaluation board, software anddocumentation.




Continued

▲▲Back


Contents

FRONT-END FOR DIGITAL SATELLITE TELEVISION

Fujitsu Microelectronics Europecontinues the success story with one of the most advanced, highlyintegrated single-chip solutions fordigital satellite broadcasting, whichcombines a tuner, a QPSKdemodulator and a Forward ErrorCorrection Unit into one 120-pinpackage.

Many set-top box manufacturersaround the world already use thewell known MB86A15. It offers aseries of benefits over previous-generation discrete QPSK NIMs,

including much smaller size,significantly reduced powerconsumption and lower cost.

The chip integrates a Zero IFTuner, a QPSK Demodulator andForward Error Correction (FEC)circuitry, making it ideal for DVB-Sand DSS transmissions, withoutthe use of tuning-diodes, expensivecapacitance and inductiveelements.

This means that the onlyexternal components needed todesign and build a completeworking front-end for a set-top boxare the F-connector, a 4MHzcrystal, and some resistors andsimple capacitors.

In addition, the MB86A15internally generates the controlsignal for DiSEqC 1.x, the standardfor interfacing between the satellitedish and receiver, which makes it

QPSK silicon tuner (MB86A15) evaluation board

QPSKDemodulator

Zero IFTuner

FowardError

Correction

SCL, SDA& ADR(2:0)

Parallel andSerial TransportStream Output

LNB Control:14/18V and 22kHz

DiSEqC 1.X

(950 to 2150MHz)

DiSEqC

RF Input TS Output

Lock Signal

I2CQPSK Silicon Tuner (MB86A15)

QPSK silicon tuner (MB86A15) block diagram

SmartMPEGAudioDAC

SDRAM64Mbit

XTAL

IR

I2C

SM1 UPI

DAC 1-5

VideoRGB& YC

L

R

S/P-DIF

Flash8Mbit

QPSKSilicon Tuner

I2S

IR Rx

TS2

XTAL

From Satellite Dish(950 to 2150MHz)

Typical configuration using the QPSK silicon tuner (MB86A15): Simple set-top box for satellite reception




Continued

▲▲Back


Contents

Monitor software for PC for the QPSK silicon tuner (MB86A15)

possible to switch between anarray of dishes. The DiSEqC 1.xstandard requires a protocolinvolving very strict timing, andthis is supported by the new chipdirectly in hardware, optimisingperformance and reducing theamount of software needed.

Much lower powerconsumption is an attractivefeature of the MB86A15, whichoperates from supply voltages ofjust 2.5, 3.3 and 5V. This contrastswith previous generation designs inwhich the tuning diode required a30V supply.

Maximum power dissipation ofthe new device is 1.5W (at45Mbaud), and thanks to this it isavailable in a compact LQFP 120-pin package.

zThe low power consumptionwill help to further reduce costsand make design andimplementation easier.

Key Features

● Multi-Chip-Package (MCP), using Fujitsu’s advanced MCP technology

● For logic module: CMOS 0.25µmtechnology

● For RF module: BiCMOS technology

● Includes Zero IF Tuner, QPSK Demodulator and Forward Error Correction

● DVB-S (SCPC, MCPC)) and DSS compatible

● No external inductors or variablecapacitance diodes required

● Supply voltages: +5, +3.3 and +2.5V, (30V for tuning is not required)

● Input frequency range: 950 to 2150MHz

● Input signal level per channel: typ. -75 to -10dBm

● Symbol rates: 1 to 45Mbaud● Carrier capture range: ±5MHz

● Automatic IQ detection● Automatic detection of Viterbi

code rates (DVB: 1/2, 2/3, 3/4, 5/6, 7/8)

● I2C® bus interface● DiSEqC® 1.x compatible● Built-in carrier frequency offset

monitor (via I2C bus interface)● C/N Monitoring function

(via I2C bus interface)

● Total power consumption: less than 1.5W (at 45Mbaud, decreases at lower baud rates)

● Package: 120-pin plastic LQFP (FPT-120P-M21)

● Ambient temperature: 0 to 70°C




Forward

▲▲Back


Contents

Development Kit available whichincludes:

● Evaluation Board with RF input and transport stream output

● Application Programming Interface software (API) in source code will be provided byFujitsu

● Evaluation board including monitor software for PC is available. This software offers graphical BER display, bar graphs for signal strength/ quality and transponder administration including DiSEqC control.

Key Applications

● Digital set-top boxes for satellite reception

● Television Set incorporating a digital satellite reception (IDTV)

● Network Interface Module (NIM) for Satellite reception

● PC Cards, which use the DVB-SStandard for Data Broadcasting

● Head-end stations




Continued

▲▲Back


Contents

MPEG-2 DECODER FOR DIGITAL TELEVISION

The third generation MPEG-2decoder called SmartMPEG(MB86H2x) is ideally suited formedium and low-end set-top boxapplications. The SmartMPEGincludes nearly all of the requiredfeatures for these set-top boxapplications, requiring only a singleSDRAM and a FLASH memory foroperation.

The SmartMPEG is the firstFujitsu MPEG device to use a sharedmemory architecture. In this shared

architecture, a single SDRAM isused for MPEG decoding, OSDgraphic generation and the systemprocessor. Performance of theembedded ARC Tangent-A4 CPUrunning with 130MHz is very highand after initialisation it iscompletely available for other taskslike OSD processing or SI dataanalysis. This high performanceincrease is achieved through anincreased clock frequency, additionalinstructions, a 2kB data cache, a 4kBinstruction cache and a fastermemory system.

The specialised SDRAM interfaceis capable of connecting to both 16and 32 bit SDRAM devices, allowingselection of the optimal componentsfor each application. A 32 bit deviceneed only be used when extremelyhigh OSD-graphic performance isrequired.

SmartMPEG evaluation board

SmartMPEGThe on-chip digital PLL (instead ofexternal VXCO), the 7-segmentcontroller and the option to use thevideo DACs for audio output, allowcustomers to reduce the cost forlow-end applications to an absoluteminimum. This high level ofintegration will enable customers toachieve one of the most efficientsolutions for medium- and low-endset-top boxes available on themarket today.

There are derivatives availablefrom the SmartMPEG, which includefeatures for special applications. Forexample an NDS ICAM, whichallows the SmartMPEG to be used ina network, where the NDSscrambling algorithm is used. TheSmartMPEG for extendedtemperature makes it ideally suitedfor automotive applications. Forcertain PayTV Networks a

Macrovision version is alsoavailable.

Fujitsu’s Application Interfacesoftware (FAPI) enables customersan easy start for their owndevelopment. The FAPI includesmany low level driver and middlelevel examples. The block diagramabove shows the FH_LIB (FujitsuHardware Library) offering a directaccess to each register in the device.The FD_LIB (Fujitsu Driver Library)includes the driver set, like I2C, IC-Card and Video Driver. In addition,the middleware and the applicationare running.

The basic FAPI runs with orwithout an operating system.

Some interactive API’s are portedto the SmartMPEG. This allowscustomer to build set-top boxes orIDTV’s incorporation OpenTV,MHEG-5 or NDS Middleware.




Continued

▲▲Back


Contents

SmartMPEG block diagramKey Features

● CMOS 0.18µm technology● MPEG2 video ISO/IEC 13818-2

([email protected]@ML)● MPEG audio layer 1/2● 32 bit RISC CPU (ARC Tangent

A4 @ 130MHz) with extensions● 4k I-cache / 2k D-cache● Three timers / watchdog / power-

down mode● Shared memory interface

(SDRAM, 16/32 bit data), 64Mbit...1Gbit

● Universal processor interface (IDE, NAND/NOR FLASH, Common Interface)

● Two transport stream decoders (decoding/recording) including DVB descrambler

● Flexible MPEG video resizing (factor 1/16 to 2)

● Display controller with up to four true-colour graphic or CLUT layers




Continued

▲▲Back


Contents

● Teletext / WSS / CC / VBID insertion

● PAL/NTSC/SECAM digital encoder

● RGB De-matrix (RGB or YCrCb output)

● Control of brightness, contrast and colour saturation of RGB and YCrCb output

● 5 video DACs @ 10 bit● ITU-R 656 video input/output● S/P DIF output for

PCM/AC3/MPEG● UART/2 x Smart Card

IF/I2C/GPIO● 7-segment LED controller for

5 digits● Infra Red receiver/transmitter● PWM Output● On-chip DPLL, requiring only

27MHz crystal

Application

AdditionalCustomerSoftware

FM – LibraryFujitsu Middleware API

FD – LibraryFujitsu Driver APIOS Kernel

FH – LibraryFujitsu Hardware API

MPEG Decoder Hardware

Adap

tatio

n La

yerRTOS API

Application programming interface (API) of SmartMPEG using an RTOS

● Typical power consumption: typ. 700mW (1.8V device with 3.3V I/O)

● Typical power consumption in Standby mode: typ. 100mW (1.8V device with 3.3V I/O)

● Low Profile QFP208 Package orBGA256 Package

● Ambient Temperature Range: 0 to 70°C (-40 to +85°C for MB86H22)

Derivatives of SmartMPEG

● MB86H20 – SmartMPEG Standard Version in QFP208 Package

● MB86H21 – SmartMPEG with NDS ICAM in QFP208 Package

● MB86H22 – SmartMPEG for ext. temperature range -40 to +85°C in QFP208 Package

● MB86H23 – SmartMPEG with Macrovision support (Ver 7.1.L1) in BGA256 Package

● MB86H24 – SmartMPEG with NDS ICAM in BGA256 Package




Forward

▲▲Back


Contents

SmartMPEGAudioDAC

SDRAM64Mbit

SmartCard

XTAL

QPSKSilicon Tuner

SegmentDisplay IR

HDD

I2C

SmartCard IF

SMI UPI

DAC 1-5

VideoRGB& YC

L

R

7-Seg-CTRL

S/P-DIF

XTAL

Flash8Mbit

QPSKSilicon Tuner

I2S

IR Rx

TS2

TS1

Typical configuration using the MPEG-2 decoder SmartMPEG – digital video recorder using two front-ends and ahard disk drive

Development Kit available which includes:● Evaluation Board with transport

stream input and analogue video output, single 12V supply,USB for debug

● Application programming interface software (FAPI) will beprovided by Fujitsu

● Software example in Flash

Key Applications

● Digital set-top boxes for satellite, cable and terrestrial reception

● Free-to-Air and PayTV Applications

● Television Set incorporating a digital reception unit (IDTV)

● Personal / digital video recorderapplications

● Automotive/mobile/handheld applications

● Head-end stations




Continued

▲▲Back


Contents

MPEG-2 ENCODER

Host/SDRAMI/F Controller

Serial I/FController

Controller(32bit RISCProcessor)

BootROM

VideoEncoder

AudioEncoder

TBC

PLL

SystemEncoder

27MHz

54MHz

Clock Input(27MHz)

AudioInput I/F

SDRAM I/F

VideoInput I/F

Host/SDRAM I/F

Serial I/F

Bit StreamOutput Port

MB86391

MPEG-2 encoder (MB86391) block diagram

MPEG-2 encoder (MB86391) evaluation board

The MB86391 is a full MP@MLcompliant MPEG-2 encoder thatintegrates video, audio and systemencoders on a single chip. TheMPEG-2 encoder takes advantage ofthe high-performance MPEG-2compression algorithm developedby Fujitsu. This device is acombination of hardware andsoftware processed by an internalSPARClite CPU. It is expected to bea key component for realising higherperformance and more compact

digital audio-visual equipment, suchas disk recorders, camcorders, videocommunication, etc.

Key Features

● Single chip encoder● Video encoder

• MPEG-1 (ISO/IEC11172-2)• MPEG-2 MP@ML encoding

function (ISO/IEC13818-2)• NTSC and PAL video formats• Maximum bit-rate is 15Mbps• Video input interface:

ITU-R 656● Audio encoder

• MPEG-1 Audio layer-1/2 encoding function (ISO/IEC11172-3)

• Maximum bit-rate is 448kbps• Audio Input Interface: I2S

● System multiplex• Output format is selection of

PS, TS and MPEG-1 System

• Constant or variable bit rate (CBR / VBR)

• Maximum bit-rate is 20Mbps● External memory: SDRAM:

4x(1Mx16 bit) or 2x(2M x 32 bit)● Time base corrector (TBC)● Internal 32 bit RISC processor

● Simple control of encoding parameters via serial port

● Power consumption: typ. 550mW● Package: HQFP-208● Operating temperature:

-20 to +85°C




Forward

▲▲Back


Contents

SmartMPEG

AudioDAC

Flash8Mbit

SDRAM64Mbit

SDRAM64Mbit

SDRAM64Mbit

MPEGEncoder

VideoADC

AudioADC

XTAL

QPSKSilicon Tuner

XTAL

PLL

SegmentDisplay IP Rx IP Tx

HDD

TS1

I2C

TS2

GPIO(CTRL)

SMI UPI

DAC 1-5

VideoRGB& YC

I2SL

R

IR TxIR Rx7-Seg-CTRL

VideoYC &CVBS

L

R

S/P-DIF

Typical configuration using the MPEG-2 encoder (MB86391) – personal video recorder using one satellite front-end, MPEG-2 decoder and MPEG-2 encoder

Key Applications

● Video distribution systems● Car entertainment systems● Video conference systems● Digital video recorder● D-VHS recorder● D-STB, Personal Video Recorder

(PVR)● Video disk recorder● MPEG-2 PC encoder card● Surveillance systems● Head-end stations




Forward

▲▲Back


Contents

INTRODUCTION TO GRAPHIC DISPLAY CONTROLLERSFujitsu’s new family of graphicdisplay controllers will optimisesolutions for embedded graphicapplications such as car navigationand mobile information terminals.The products in this family havenumerous functions which arestate-of-the-art to graphiccontrollers today, but have beenspecially optimised for the area ofembedded systems. This meansthat, in addition to many 2D and 3Drendering functions, there is aflexible layer concept, support forscreen resolution of up to XGA(1024 x 768) and further featureswhich are of particular interest in

In-car navigation is a key target application for the ‘Cremson’ graphic display controller

the area of navigation, such asalpha-blending and anti-aliasing. Allderivatives have a CPU interface toenable direct connection ofembedded CPUs and MCUs. Fujitsuoffers a range of graphic displaycontrollers with different levels ofintegration for various applications.




Continued

▲▲Back


Contents

An important feature of ‘Cremson’ and all subsequent members of the family is that graphical informationcan be displayed on four overlapping, independent layers

C (Console) layer– 8, 16 bit/pixel– Applied to show switches and panel displays

M (Middle) layer– 8, 16 bit/pixel– Supplement for Base, can be divided into two

zones

W (Window) layer– 16 bit/pixel (Y:U:V = 2:1:1)*– Applied to overlay input video image

B (Base) layer– 8, 16 bit/pixel– Fundamental map display layer, can be divided

into two zones* To be supplied by 2nd generation product withembedded DRAM. This layer can be adopted as a3rd graphics layer as well.

MB86290A ‘CREMSON’MB86290A ‘Cremson’ is a 2D/3Dgraphics controller, optimised forapplications in car navigationsystems and mobile informationprocessing terminals. Adoptingvarious sophisticated functions,such as flat or Gouraud shading,bi-linear texture mapping, and Z-buffering, ‘Cremson’ offers a high-speed, superior-performance 3Dgraphics functionality.

Moreover, anti-aliasing,concaved polygon rendering andfast line draw features are alsoincluded, allowing smooth andsophisticated-quality rendering. Asa result, ‘Cremson’ performs high-quality rendering operations, withsimilar quality to leading-edge PCgraphics, but with lower powerconsumption. ‘Cremson’ supportsa 64 bit-wide external memoryinterface. This interface is driven at

the same 100MHz frequency as itsinternal operation, to support the large-memory bus bandwidth that is needed to perform the high-performance graphicsoperations described above. Also,in order to support various kinds ofsystem configurations, ‘Cremson’offers a configurable host interfacefor four types of CPUs (FujitsuFR30, Hitachi SH3/4, and NECV832) without external glue logic.

To address the especiallycomplex Window configurations ofcar navigation systems, ‘Cremson’offers 4 layers of overlay planes.These layers are (from top tobottom): C (console) layer, W(window) layer, M (middle) layerand B (base) layer. All layers can berendered in 16 bit/pixel colour(65,536 colours displayed at a

time) or rendered in 8 bit indirectcolour mode (256 selected out of262,144 colours). The colour palette can be defined separately to the C layer and B and M layers.

A transparent colour option isused to blend the layers directly.




Continued

▲▲Back


Contents

The new GDC’s support for 3D graphics makes possible features such as ‘bird-view’ perspectives

Layer Concept

For screen separation in wide-screen displays, the M and B layerscan be split into two separatesegments (left and right). Thisfeature is useful when two differentreduced map scales are displayedside by side. Of course, all theselayers and segments can bescrolled independently. In addition,two hardware cursors aresupported.

An ‘alpha-flag’ per pixel issupported for the C-layer. Thisfeature is useful for blending the C layer colour with all the layercontents below, providing avariable transparent colour effect(‘alpha-blending’).

‘Cremson’ consists of 4 blockmodules: host interface block,external memory interface block,display control block, and 2D/3Drendering block. An internal 64 bitbus called Pixel bus connects thesemodules. Also, the host interfaceblock is connected to each of theother 3 blocks independently toavoid display and/or renderingoperations when the host CPUattempts to access these modules.




Forward

▲▲Back


Contents

2D/3DRendering

Engine

DisplayController

DAC

H/V syncColourkeyExternal

Bus ofFR CPU

D(0:31)

A(2:25)

MD(0:63)

MA(0:13)

HostInterface

ExternalMemory

Controller

64MbitSDRAM

or16MbitSGRAM

Pixe

l Bus

MB86290A ‘Cremson’ uses an internal 64 bit-wide pixel bus to connect the main hardware blocks: Host interface, memory controller, display controller and rendering engine

Key Features

● CMOS 0.25µm technology● Display resolutions up to

1024 x 768● 4 layers of overlay display

(bottom 2 layers are both split into separate segments)

● RGB analogue output (high speed DAC)

● Includes various kinds of 2D/3D graphic acceleration functions

● Built-in alpha blending, anti-aliasing and chroma-keying

● Up to 32MB external graphic memory (SDRAM) 64 bit wide@ 100MHz

● Configurable CPU-interface for FR30, SH3, SH4, V83x CPUs

● Supply voltage 3.3V (I/O), 2.5V (Internal)

● QFP-240 Package● Temperature range -40 to +85°C




Continued

▲▲Back


Contents

HostInterface

External VideoInterface Controller

2D/3DRendering

Engine

DisplayController DAC

Pixe

l BusExternal

Bus ofFR CPU

MemoryInterfaceController Geometry

Engine

D(0:31)

A(2:25)

YUV or RGB

Digital RGB

Embedded SDRAM16Mbit

MB86291A ‘Scarlet’ adds 16Mbit embedded SDRAM, video input functions and a geometry processor

MB86291A ‘SCARLET’MB86291A ‘Scarlet’ is an enhancedversion of MB86290A ‘Cremson’which adds 16Mbit embeddedSDRAM, video input functions and ageometry processor. The concept ofdisplay layers, 2D/3D renderingfunctions and the display controllerfeatures are taken from ‘Cremson’MB86290A.

Scarlet is optimised forapplications in car navigationsystems, which require video-inputfeatures, consumer informationprocessing systems and arcadegame applications.

Scarlet has 16Mbit of embeddedSDRAM with high bandwidth(100MHz). No external SDRAMdevices are required for graphicmemory. The external video inputcan be used to capture video signalsaccording to the standard RBT-ITU656 YUV4:2:2 format.

Picture-in-picture functions aresupported to display the videoimage (the W-layer is dedicated forthat purpose). To adjust thedimensions of the video-inputformat, a flexible video scaler isintegrated.

A geometry processor, capableof performing numeric calculationsfor graphical operations isincluded. Supported functions areAffin-conversions, model-viewprojections, 3D-clipping operationsand others.

All drawing functions, display list-formats and software functionsare compatible to the ‘Cremson’MB86290A.

An additional RGB digitalinterface offers flexible displayconnections.




Forward

▲▲Back


Contents

‘Scarlet’ offers some of the most advanced functionality yet developed for use in automotive navigation andmultimedia information terminals

Key Features

● CMOS 0.25µm technology● Display resolutions up to

1024 x 768● 4 layers of overlay display


● Digital video input● Video scaler● I2C interface● Geometry processor● RGB analogue output (high

speed DAC)● RGB digital output (8 bit x 3)● Includes various kinds of 2D/3D

graphic acceleration functions


● Embedded 16Mbit SDRAM graphic memory



● QFP-208 Package● Temperature range -30 to +85°C




Continued

▲▲Back


Contents

MB86292 ‘ORCHID’

HostInterface


2D/3DRendering

Engine

DisplayController

Pixe

l BusExternal

Bus ofFR CPU

GeometryEngine

D(0:31)

A(2:25)

YUV

MD(0:63)

MA(0:13)

ExternalMemory

Controller

Digital RGB

32MByteSDRAM

orFCRAM

MB86292 ‘Orchid’ offers all the functions of ‘Scarlet’ but allows SDRAM or FCRAM™ memory up to 32MB

‘Orchid’ is optimised for applications in carnavigation systems.

MB86292 ‘Orchid’ is anotherversion of MB86291 ‘Scarlet’,which has external video memoryconnection up to 32MB for thoseapplications where the 2MBembedded SDRAM of MB86291‘Scarlet’ is not sufficient. Allfunctions of ‘Scarlet’ includingvideo input, scaler and a geometryprocessor are also available on‘Orchid’. The concept of displaylayers, 2D/3D rendering functionsand the display controller featuresare taken from ‘Cremson’ and

‘Scarlet’. ‘Orchid’ is optimised forapplications in car navigationsystems that require video inputfeatures, consumer informationprocessing and arcade gamefunctions. The external memoryinterface can be connected toFujitsu FCRAMTM or SDRAM-typememory devices. The externalvideo input can be used to capturevideo signals according to thestandard RBT-ITU656 YUV4:2:2format. Picture-in-picture functionsare supported to display the videoimage (the W-layer is dedicated forthat purpose). To adjust thedimensions of the video inputformat, a flexible video scaler isintegrated. A geometry processor,capable of performing numericcalculations for graphicaloperations, in included. Supportedfunctions are Affin-conversions,

model-view projections, 3D-clippingoperations and others. ‘Orchid’ hasonly RGB digital outputs for displayconnections. All drawing functions,display list-formats, and softwarefunctions are compatible to the‘Cremson’ MB86290A and ‘Scarlet’MB86291.




Forward

▲▲Back


Contents

Key Features

● CMOS 0.25µm technology ● Display resolutions up to

1024 x 768 ● 4 layers of overlay display


● Digital video input ● Video scaler ● I2C interface ● Geometry processor ● RGB digital output (8 bit x 3) ● Includes various kinds of 2D/3D

graphic acceleration functions


● External SDRAM or FCRAMTM

interface for up to 32MB graphicmemory



● QFP-256 Package ● Temperature range -40 to +85°C




Continued

▲▲Back


Contents

MB87P2020A ‘JASMINE’MB87P2020A ‘Jasmine’ is anenhanced version of MB87J2120‘Lavender’ which adds 8Mbitembedded SDRAM, and somemore improved features. Thedevice is fully compatible to the‘Lavender’ chip and uses the sameinternal architecture, the samelayer and interface concept. Noexternal memory devices arerequired for graphic memorybecause of the 8Mbit embeddedSDRAM. As a consequence, thepackage could be reduced toQFP208. Therefore, ‘Jasmine’ isoptimised for compact automotiveor consumer applications where ahigh integration of functions isrequired. Like ‘Lavender’, the‘Jasmine’ is optimised to work as acompanion chip for the Fujitsu 32bit RISC devices MB91F36x.

As a successive product to‘Lavender’, the new device has anumber of enhancements that allowthere to be more flexibility in theapplication area. First of all, a newvideo input interface was developedwhich allows acceptance of moreformats (including YUV) and whichis compatible to a wider range ofvideo decoder chips. A newprogrammable converter matrix(YUV to RGB) allows writing ofthese YUV formats to layers and toconvert back to RGB for scanning.

In addition, a gamma correctiontable was added to allowadjustment of the picturecharacteristics according to theconnected display requirementsand the colour look-up table thatcan now hold up to 512 entries.

FR HostInterface

DAC

Pixe

l Bus

ExternalBus of

FR CPU

MemoryInterfaceController

D(0:31)

A(2:25)

RGB/YUV

Digital RGB

H/VsyncBacklight

Video InterfaceController

Pixel Processor(2D)

Display,Sync,

BacklightController

ULB

PP

V/C

Embedded SDRAM8Mbit

GPU

MB87P2020A ‘Jasmine’ is fully compatible with the MB87J2120 ‘Lavender’ and uses the same internal architecture.No external memory devices are required for graphic memory because of the 8Mbit embedded SDRAM




Forward

▲▲Back


Contents

Key Features

● CMOS 0.25µm technology ● Flexible display controller for

almost all standard LCD panels ● 4 layers of overlay display (out of

16 logical layers) ● RGB analogue output (DAC) ● RGB digital output ● Includes 2D graphic acceleration

functions

● Gamma correction embedded ● Embedded SDRAM graphic

memory 8Mbit (1MByte) ● Digital video input (RGB and YUV

formats) ● CPU-interface for FR30 ● Supply voltage 3.3V (I/O), 2.5V

(Internal) ● QFP208 Package ● Temperature range -40 to +85°C




Continued

▲▲Back


Contents

MB86293 ‘CORAL Q’

2D/3DRendering

Engine

DisplayController

DAC

Digital RGB

ExternalBus of

FR CPU

D(0:31)

A(2:25)

MD(0:63)

MA(0:13)

HostInterface

ExternalMemory

Controller

Pixe

l Bus

GeometryEngine64MByte

SDRAMor

FCRAM

MB86293 ‘Coral Q’ has a 6-layer structure and a geometry processor that perform co-ordinate conversionsat 166MHz

The new ‘Coral’ device family offersan increased internal operatingfrequency of 166MHz, a 64 bitmemory bus, support for sixindependant layers, advancedalpha-blending features andenhanced video input facilities. Thehigher internal frequency of166MHz (400MHz for display dotclocks) enables the renderingengine of the devices to achieve afactor 10 improvement in texturemapping and drawing image qualitycompared to the previous graphiccontroller devices.

The enhanced bandwidth allowsa much greater rate of access forgraphics elements, and deliversimproved scanning functions athigher display resolutions. The‘Coral Q’ and ‘Coral B’ devices arecompatible with host CPU busesincluding Fujitsu FR, Hitachi SH3

and SH4 and NEC V83 withoutexternal glue logic. All devices arebinary compatible with previousgeneration graphic displaycontrollers, like the ‘Cremson’,‘Orchid’ and ‘Scarlet’ devices. Thishelps to speed-up developmentsand save costs because existingsoftware modules (e.g. maprenderer) and drivers can be usedwithout any modifications.

An enhancement to 2D-drawingfunctions is the integration of a linedepth display facility, which clearlydefines the correct respective levelof intersecting map lines. Enhancedhardware design also providesimprovements in pattern lineperformance.

All ‘Coral’ devices address up to64MB of external SDRAM orFCRAMTM memory @ 133MHz andare capable of adjusting picture

sizes to optimise the availablememory space. All layers can havea colour depth of 8, 16 or 24bits/pixel and can be changed inposition, size and priority. Themaximum logical layer size hasbeen increased to 4096 x 4096pixels.




Forward

▲▲Back


Contents

L0 Layer

L1 Layer

L2 Layer

L3 Layer

L4 Layer

Background Colour

Alpha PlaneAxL1 + (1-A)xL2

‘Coral’ family layer structure

Key Features



(Windows) ● Alpha Plane● Geometry processor ● RGB digital output (8 bit x 3) ● RGB analogue output● Includes various kinds of 2D/3D

graphic acceleration functions ● Built-in alpha blending,

anti-aliasing and chroma-keying ● External SDRAM or FCRAMTM

interface @ 133MHz for up to 64MB graphic memory



● QFP-256 Package ● Temperature range -40 to +85°C




Continued

▲▲Back


Contents

MB86294 ‘CORAL B’‘Coral B’ adds video input to thefeatures of ‘Coral Q’ and isavailable in a BGA package. Thevideo input is capable of acceptingTV tuner, DVD player or camerasignals in PAL or NTSC videoformats (ITU656 format). Videopictures of diverse resolution andframe frequency rate, in eitherprogressive or interlaced modes,can be grabbed, scaled anddisplayed picture-in-picture.

The latest automotive andconsumer appliance screens areincreasing resolution to achievebetter readability. They demandimproved picture quality to match,for example DVD quality. In orderto meet these demands, ‘Coral’integrates a new video input up-scaling facility, which allows a full-screen mode of multimedia

pictures at large resolutions to bedisplayed. Both up-scaling anddown-scaling can be setindependently in horizontal andvertical directions in pixel or lineresolutions.

Using the Alpha-map featuresof the ‘Coral’ architecture, a videopicture can be blended smoothlytogether with rendered graphics.The alpha map can be freelyassigned to any of the six layersand allows the assignment of 8 bitsper pixel, enabling each pixel to bemixed to control transparency to avery high degree of accuracy. Inaddition, all layers can be blendedat a fixed ratio of 256 levels. To enhance bit BLT (Bit BlockTransfers) operations, this featurecan now be combined withalpha-mapping. With this function,

2D/3DRendering

Engine

DisplayController

DAC

Digital RGB

ExternalBus of

Host CPU

D(0:31)

A(2:25)

MD(0:32)

MA(0:13)

HostInterface

ExternalMemory

Controller

Pixe

l Bus

GeometryEngine


Analogue RGB

YUV

32MByteSDRAM

orFCRAM

MB86294 ‘Coral B’ offers video input with upscaling, in addition to the new ‘Coral’ family features

any bitmap can be copied from anysource location (CPU- orVideo-memory) and can be copiedonto a layer with an independentalpha-map. Software routines thatmake use of this function cangreatly improve image quality (forexample anti-aliasing over amoving background).




Forward

▲▲Back


Contents

Key Features



(Windows) ● Alpha Plane● Digital Video input ● Video Scaler (up/down scaling)● I2C interface● Geometry processor ● RGB digital output (8 bit x 3) ● RGB analogue output

● Includes various kinds of 2D/3D graphic acceleration functions



interface @ 133MHz for up to 64MB graphic memory



● BGA-256 Package ● Temperature range -40 to +85°C




Continued

▲▲Back


Contents

MB86295 ‘CORAL P’ & MB86296 ‘CORAL PA’‘Coral P’ is an enhanced version of ‘Coral B’ with a PCI host interfaceand a new video input controller. AnyCPU with a 32-bit PCI V2.1-compliant host interface can bedirectly connected to ‘Coral P’. Thedevice includes both master andslave functions and an internal DMAcontroller for multi-burst transfers oflarge quantities of data between allcombinations of PCI data space and‘Coral’ internal areas.

Additional functions provided bythe host interface are generalpurpose I/O pins and a serialinterface. The external video input of‘Coral P’ accepts data conforming tothe standards RBT-ITU656, RBT-ITU601, RGB666 and RGB888. Thisallows video signals of varioussources to be displayed together

with generated graphics. The videoinput is capable of accepting TV tuner,DVD player or camera signals in PALor NTSC video formats. In addition,rendered graphics from any otherdisplay controller can be used as videoinput source.

The video stream is read, modifiedand written to a video buffer memorycompletely independent of the displayscanning process. Video pictures ofdiverse resolution and framefrequency rate, in either progressive orinterlaced modes, are able to begrabbed, scaled and displayed picture-in-picture. As ‘Coral B’, ‘Coral P’integrates a new video input up-scaling facility, which now allows afull-screen mode of multimediapictures at large resolutions to bedisplayed. Both up-scaling and down-

scaling can be set independently inhorizontal and vertical directions inpixel or line resolutions.

A set of general I/O pins and aserial interface are also included forsimple external resource control.

2D/3DRendering

Engine

DisplayController

DAC

Digital RGB

PCIBUS

INTERFACE

D(0:31)

A(2:25)

MD(0:32)

MA(0:13)

HostInterface

ExternalMemory

Controller

Pixe

l Bus

GeometryEngine


Analogue RGB

RGB

YUV

SIO GPIO I2C

64MByteSDRAM

orFCRAM

MB86295 ‘Coral P’ block diagram




Forward

▲▲Back


Contents

Key Features



(Windows) ● Alpha Plane● Digital Video input (various

formats)● Video Scaler (up/down-scaling)● I2C interface● Geometry processor ● RGB digital output (8 bit x 3) ● RGB analogue output● Includes various kinds of 2D/3D

graphic acceleration functions ● Built-in alpha blending,

anti-aliasing and chroma-keying ● External SDRAM or FCRAMTM

interface @ 133MHz for up to 64Mb graphic memory

● PCI 32 bit V2.1 host interface● GPIO inputs/outputs

● Serial interface● Supply voltage 3.3V (I/O),

1.8V (Internal) ● BGA-256 Package ● Temperature range -40 to +85°C

The new MB86296 ‘Coral PA’ is aredesigned and feature expandedversion of ‘Coral P’. This chip hasthe following additional features:● Direct RGB666 and RGB888

video input without conversion toYUV422

● Dual display feature (independantcontents on two connected screens)

● Colour-Space conversion methodselectable as programmable option

● Brightness, Contrast, Saturation control for video input

● PCI bandwidth will increase to approx. 70Mb/s

● New ROM for Geometry Engine (enhanced functions)

● Pixel-clock delay of display output is programmable

● PCI busclock can be used as clock input

● Video texture mapping (RGB555 mode)

● Simultanous up- and down-scaling

● Enhanced pixel clock output ● 100% Pin and Function

compatible to ‘Coral P’




Forward

▲▲Back


Contents

MB862XX ‘LIME’

2DRendering

Engine

DisplayController

Digital RGB

PCI ORHOST BUS

INTERFACE

MD(0:32)

MA(0:13)

PCI/HostInterface

ExternalMemory

Controller

Pixe

l Bus Video input

and scaler

Analogue RGB

YUV/RGB

32MByteSDRAM

orFCRAM

MB862XX ‘Lime' block diagram

The new graphic controller ‘Lime’ is the perfectchoice for 2D-optimised graphic systems basedon the ‘Coral’ family

‘Lime’ will be a new extention tothe Fujitsu Graphic ControllerFamily for 2D applications. Thischip is based on the Coral familycore functions and will beoptimized for 2D rendering.

The display controller,rendering engine and video inputunit will be taken from thesuccessful ‘Coral P’ family but thefloating point co-processor and all3D-functions will be taken out.Also, the CPU interface will be

optimised for more CPUconnections and the device willhave some new functions tosupport small footprint graphicapplications. This chip will replacethe ‘Lavender’ on the long term.‘Lime’ will be 100% binary-compatible to the ‘Cremson’ and‘Coral’ family.

Key Features



(Windows) ● Alpha Plane● Digital Video input (various

formats)● Video Scaler (up/down scaling)● I2C interface● RGB digital output (8 bit x 3)

● Includes various kinds of 2D graphic acceleration functions



interface @ 133MHz for up to 64Mb graphic memory

● Standard host interface● GPIO inputs/outputs● Serial interface


● BGA-256 Package ● Temperature range -40 to +85°C




Continued

▲▲Back


Contents

PRODUCT ROADMAPNew enhanced graphics displaycontrollers (GDCs) for variouskinds of digital audio/videoapplications, in which multimediafunctions will be integratedtogether are planned as successiveproducts. In addition, we plan tointegrate a CPU core and variousI/O functions and define a single-chip solution for car navigationapplications. As Fujitsu's primaryGDC product line, the carnavigation family will be extendedfurther.

Roadmap of graphic controller devices Under development

100MHz, 4 Layers2D/3D

80MHz, 4 Layers2D

166MHz, 6 Layers2D/3D

600MHz, 8 Layers2D/3D, Media Engine

Premium Navigation

Navigation Systems

Mobile & PDA

Cremson Family

Coral Family

Dashboard / Consumer

Low End GDC Family

Carmine FamilyHigh End Infotainment

2000 2001 2002 2003 2004 2005 2006

Coral QCoral B

Coral P

Carmine

OrchidScarlet

Cremson

JasmineOlive

Lime

MMP1MMP2

Coral PA

tbd

Carmine 1Carmine 2




Continued

▲▲Back


Contents

EVALUATION BOARDSFor application developmentsupport and functional evaluation,a number of evaluation boards areavailable from Fujitsu:PCI adaptor cards with all graphics controllers from the ‘Cremson’ and‘Coral’ families are available,which enable the evaluation of thedevice features directly from aWindows PC. For this, a Windows98/NT/Windows 2000 driver and amap driver are bundled with thisadaptor card in order to get started,enabling easy programming of thedevices from a Windows-baseddevelopment environment. Also,the source code of variousapplication examples is included.Although the main purpose issoftware development it can bemounted directly to an embeddedsystem.

MB86290A-EB01 ‘Cremson’ evaluation board

‘Cremson’ Starterkit Series

The ‘Cremson’ Starterkit is amodular evaluation board, whichprovides a stand-alone embeddedenvironment. The kit hardwareconsists of two parts, a CPUmodule, which carries a Fujitsu 32bit RISC MCU MB91F36X and a setof sub-boards for the graphiccontrollers ‘Cremson’, ‘Scarlet’,‘Lavender’ and ‘Jasmine’. In orderto facilitate the appropriateconfiguration for the applicationrequirements, the system allowseasy interchange of the CPU typeor the graphic controller.

The interconnection betweenboth module boards is the host-CPU bus interface. All functions ofthe graphic devices and the CPUare present on pin headers,




Forward

▲▲Back


Contents

jumpers or switches, which allowthe addition of hardwareextensions.

The new CPU Board, equippedwith MB91F369, allows creationand full debugging of applicationsunder Softune Workbench directly!This CPU-module has additionally2MB debugging RAM on board,which is required for the monitordebugger. In combination with thePCI adapter MB8629XEB01, thesoftware modules developed underWindows can then also be useddirectly in the stand-aloneenvironment.

A starterkit is available for the GDCs, enabling designers to build up specific embedded applications with thetargeted processor and GDC together




Continued

▲▲Back


Contents

GRAPHIC CONTROLLER COMPARISON TABLESDevice Name Chip 2D 3D Texture Number Alpha RGB RGB Video Video Video Other Video Geometry CPU Package

frequency mapping of layers blending digital analogue input formats scaler I/F memory processor interface

MB87P2020 Jasmine 64MHz x - - 4 - x x x YUV/ - - embedded - FR QFP208 RGB (1MByte)

MB86290A Cremson 100MHz x x 256 x256 4 4 bit/ - x - - - - external - FR,SH3/4, QFP240 layer (up to V850

32MByte)

MB86291A Scarlet 100MHz x x 256 x 256 4 4 bit/ x x x YUV down 12C embedded Version 1 FR,SH3/4, QFP208layer scaling (2MByte) V850

MB86292 Orchid 100MHz x x 256 x 256 4 4 bit/ x - x YUV down 12C external Version 1 FR,SH3/4, QFP256layer scaling (up to V850

32MByte)

MB86293 Coral Q 166MHz x x 4096 X 4096 6 8 bit x - - - - - external Version 2 FR,SH3/4, QFP256alpha-plane (up to V850

64MByte)

MB86294 Coral B 166MHz x x 4096 x 4096 6 8 bit x x x YUV up + 12C external Version 2 FR,SH3/4, QFP or alpha-plane down (up to V850 BGA256

scaling 64MByte)

MB86295 Coral P 166MHz x x 4096 x 4096 6 8 bit x x x YUV/ up + 12C external Version 2 PCI BGA256alpha-plane RGB down SIO (up to

scaling GPIO 64MByte)

MB86296 Coral PA 166MHz x x 4096 x 4096 6 8 bit x x x YUV/ up + 12C external Version 3 PCI BGA256alpha-plane RGB down SIO (up to (high b/w)

(native) scaling GPIO 64MByte)

MB862xx Lime 133MHz x - 4096 x 4096 6 8 bit x - x YUV/ up + 12C external - PCI + BGA256alpha-plane RGB down SIO (up to various

(native) scaling GPIO 32MByte) host




Forward

▲▲Back


Contents

Evaluation Board Description Device

MB86290EB01 PCI board for PCs (WinNT/2000) MB86290A Cremson

MB86291EB01 PCI board for PCs (WinNT/2000) MB86291A Scarlet

MB86292EB01 PCI board for PCs (WinNT/2000) MB86292 Orchid

MB8629XEB01+MB86293EB01* PCI board combination for PCs (WinNT/2000)* MB86293 Coral Q

MB8629XEB01+MB86294EB01* PCI board combination for PCs (WinNT/2000)* MB86293 Coral B

MB86295EB01 PCI board for PCs (WinNT/2000) MB86295 Coral P

MB86296EB01 PCI board for PCs (WinNT/2000) MB86296 Coral PA

CREMSON-STARTERKIT-CPU CPU module for the ‘Cremson Modular Starterkit’ MB91F362 as host CPU

CREMSON-STARTERKITCPU369 CPU module for the ‘Cremson Modular Starterkit’ MB91F369 as host CPU + Debug RAM

CREMSON-STARTERKIT-CRM Subboard for Modular Starterkit MB86290A Cremson

CREMSON-STARTERKIT-ROSE Subboard for Modular Starterkit MB86291A Scarlet

CREMSON-STARTERKIT-JAS Subboard for Modular Starterkit MB87P2020A Jasmine

* Combination of motherboard (MB8629XEB01) and daughterboard (MB86293EB01 or MB86294EB01) – both items have to be ordered separately Order information : Please specify the item according to the ‘Device’ or ‘Evaluation board’ column




Continued

▲▲Back


Contents

EUROPEAN DISTRIBUTORS, REPRESENTATIVES & SALES OFFICES EUROPEEUROPEAN DISTRIBUTORS

AustriaEBV Elektronik GmbHA-1150 Wien, Diefenbachgasse 35/1Tel: +43 (0)1 891 52 0Fax: +43 (0)1 891 52 30

GLYN ÖsterreichWaidhausenstr. 13/2/9, A-1140 Wien,ÖsterreichTel: +43 (0)1 419 07 14 0 Fax: +43 (0)1 419 07 14 50

Ineltek Ges.m.b.H.Wagramer Strasse 126/21, A-1220 WienTel: +43 (0)1 204 98 38 0Fax: +43 (0)1 204 90 38

BelgiumEBV Elektronik GmbHB-1831 Diegem, Kouterveldstraat 20Tel: +32 (0)2 716 00 10Fax: +32 (0)2 720 81 52

GLYN BeneluxWaalreseweg 17, NL-5554 HA ValkenswaardNiederlandeTel: +32 (0)1 402 04 97 00Fax: +32 (0)1 402 04 97 84

Czech RepublicEBV Elektronik GmbHCZ-170 00 Praha 7, Argentinska 38 / 286Tel: +420 234 09 10 11Fax: +420 234 09 10 10

DenmarkEBV Elektronik GmbHDK-2860 Søborg, Rosenkæret 11 CTel: +45 39 69 05 11Fax: +45 39 69 05 04

EBV Elektronik GmbHDK-8230 Aabyhøj, Ved Lunden 9Tel: +45 86 25 04 66Fax: +45 86 25 06 60

FinlandEBV Elektronik GmbHFIN-02240 Espoo, Pihatörmä 1 aTel: +358 (0)9 27 05 27 90Fax: +358 (0)9 27 09 54 98

EBV Elektronik GmbHFIN-90100 Oulu, Nahkatehtaankatu 2Tel: +358 (0)8 562 49 10Fax: +358 (0)8 562 49 15

FranceEBV Elektronik GmbHF-13854 Aix-en-Provence Cedex 3115, Rue Nicolas LedouxImmeuble Hemiris, Bàtiment ATel: +33 (0)4 42 39 65 40Fax: +33 (0)4 42 39 65 50

EBV Elektronik GmbHF-31313 Labège Cedex (Toulouse)Actys Bâtiment 2, Voie 3, BP 348Tel: +33 (0)5 61 00 84 61Fax: +33 (0)5 61 00 84 74

EBV Elektronik GmbHF-35510 Cesson Sévigné (Rennes)29, Avenue des PeupliersTel: +33 (0)2 99 83 00 50Fax: +33 (0)2 99 83 00 60

EBV Elektronik GmbHF-69693 Venissieux Cedex (Lyon)Parc Club du Moulin á Vent,33, Av. du Dr. Georges LévyTel: +33 (0)4 72 78 02 78Fax: +33 (0)4 78 00 80 81

EBV Elektronik GmbHF-92184 Antony Cedex (Paris)3, Rue de la RenaissanceTel: +33 (0)1 40 96 30 00Fax: +33 (0)1 40 96 30 30

PN Electronics142-176 avenue de StalingradParc Technologique des Corvettes BP 53F-92703 Colombes CedexTel: +33 (0)1 47 80 67 85Fax: +33 (0)1 47 85 95 12

PN ElectronicsRue Jean Bart Immeuble Calliope, F-31317 LabegeTel: +33 (0)5 62 88 23 23Fax: +33 (0)5 62 88 23 29

PN Electronics13, impasse des Cerisiers, F-67580 LaubachTel: +33 (0)3 88 90 43 48Fax: +33 (0)3 88 90 37 11

PN Electronics334 Rue des vingt toises-Le Magistere IIF-38950 Saint Martin le VinouxTel: +33 (0)4 38 02 02 03Fax: +33 (0)4 38 02 21 00

GermanyEBV Elektronik GmbHD-07806 Neustadt / Orla, Zum Mühlenberg9Tel: +49 (0)36481 244-0Fax: +49 (0)36481 244-99

EBV Elektronik GmbHD-12277 Berlin-Mariendorf, Kitzingstr. 15-19Tel: +49 (0)30 74 70 05-0Fax: +49 (0)30 74 70 05-55

D-30938 BurgwedelIn der Meineworth 21Tel: +49 (0)5139 80 87-0Fax: +49 (0)5139 80 87-70

EBV Elektronik GmbHD-41564 Kaarst, An der Guempgesbruecke7Tel: +49 (0)2131 96 77-0Fax: +49 (0)2131 96 77-30

EBV Elektronik GmbHD-65205 Wiesbaden, Borsigstr. 7Tel: +49 (0)6122 80 88-0Fax: +49 (0)6122 80 88 99

EBV Elektronik GmbHD-71229 Leonberg, Neue Ramtelstrasse 4Tel: +49 (0)7152 30 09-0Fax: +49 (0)7152 75 95 8

EBV Elektronik GmbHD-85586 PoingIm Technologiepark 2-8Tel: +49 (0)8121 77 4-0Fax: +49 (0)8121 77 4-4 22

Glyn GmbH & Co. KGAm Wörtzgarten 8,D-65510 Idstein/Ts.Tel: +49 (0)6126 59 02 22Fax: +49 (0)6126 59 01 11

Glyn GmbH & Co.KGRingstrasse 88, D-41334 Nettetal Tel: +49 (0)2157 12 42 25Fax: +49 (0)2157 12 42 11

Ineltek GmbH (Headquarters)Hauptstraße 45, D-89522 HeidenheimTel: +49 (0)7321 93 85 0Fax: +49 (0)7321 93 85 95




Continued

▲▲Back


Contents

Ineltek Nord GmbHLindenallee 84, D-22869 SchenefeldTel: +49 (0)4083 96 04 0Fax: +49 (0)4083 96 04 33

Ineltek Mitte GmbHHauptstr. 13, D-63834 SulzbachTel: +49 (0)6028 99 38 0Fax: +49 (0)6028 99 38 38

Ineltek GmbH SüdAm Fügsee 21, D-82418 MurnauTel: +49 (0)8841 47 77 5Fax: +49 (0)8841 26 60

Ineltek GmbH ErfurtGeraerstr. 33, D-99099 Erfurt Tel: +49 (0)361 34 64 28 0Fax: +49 (0)361 34 64 28 1

GreeceGR-17778 Tavros (Athens)1, Anaxagora Str.Tel: +30 210 34 14 300Fax: +30 210 34 14 304

HungaryH-1037 BudapestMontevideo u. 2/BTel: +36 1 436 72 29Fax: +36 1 436 72 20

Ineltek Hungary Kft.Madach ter 4, H-1071 BudapestTel: +36 1 327 84 07Fax: +36 1 327 84 43

IrelandEBV Elektronik GmbHBallymount Trading Estate Ballymount Road, Walkinstown, Dublin 12Tel: +353 (0)1 4 56 40 34Fax: +353 (0)1 4 56 40 35

IsraelEBV ElektronicIL - 40600 Tel MondDrorrim South Commercial Center (Avnet building), P.O. Box 149Tel: +972 (0)9 778 02 60Fax: +972 (0)9 68 80

Toyo Ram Electronics Ltd1 Hamasger St, Raanana 43653Tel: +972 (0)9 760 36 50Fax: +972 (0)9 744 30 50

ItalyEBV Elektronik s.r.l.I-00155 Roma, Viale Palmiro Togliatti 1639Tel: +39 06 40 63 66 5/789Fax: +39 06 40 63 77 7

EBV Elektronik s.r.l.I-10156 Torino, Corso Vercelli, 348Tel: +39 011 2 62 56 90Fax: +39 011 2 62 56 91

EBV Elektronik s.r.l.I-20092 Cinisello - Balsamo (MI)Via C. Frova, 34Tel: +39 02 66 09 62 90Fax: +39 02 66 01 70 20

EBV Elektronik s.r.l.I-35100 Padova, Via IX Strada, 23/C int. 2Zona IndustrialeTel: +39 049 7 92 36 17Fax: +39 049 8 07 48 74

EBV Elektronik s.r.l.I-41010 Cognento (MO)Via Campagna, 12Tel: +39 059 29 24 / 21 1Fax: +39 059 29 29 /48 6

EBV Elektronik s.r.l.I-50127 Firenze, Via Panciatichi, 40Palazzo 11Tel: +39 055 43 69 30 7Fax: +39 055 42 65 24 0

Malpassi s.r.l.Via Baravelli 1, I-40012 Calderara di Reno BolognaTel: +39 051 72 72 52Fax: +39 051 72 73 78

Melchioni Electronica S.p.A.Divisione IndustriaVia Pietro Colletta 37, I-20135 MilanoTel: +39 025 79 43 54Fax: +39 025 41 34 001

NetherlandsEBV Elektronik GmbHNL-3606 AK Maarssenbroek, Planetenbaan116Tel: +31 (0)346 58 30 10Fax: +31 (0)346 58 30 25

NorwayEBV Elektronik GmbHN-0612 Oslo, Ryensvingen 3 B PO Box 101ManglerudTel: +47 22 67 17 80Fax: +47 22 67 17 89

PolandEBV Elektronik GmbHPL-50-062 Wroclaw, Plac Solny 16Tel: +48 (0)71 34 229 44Fax: +48 (0)71 34 229 10

EBV Elektronik GmbHPL-02-672 Warszawaul. Domaniewska 39ATel: +48 (0) 22 640 23 55 Fax: +48 (0) 22 640 23 56

RussiaEBV Elektronik GmbH RUS-127486 Moscow, KorovinskoyeChausse 10Build 2, Off. 28 Tel: +7 (0)95 937 87 07Fax: +7 (0)95 937 87 06

Ineltek RussiaKutusovsky Prospect 14, Building 1, Office30121248 Moscow, RussiaTel. +7 (0)95 101 89 70Fax. +7 (0)95 326 69 50

SloveniaEBV ElektronikSI-1511 Ljubljana, Dunajska c. 22Tel: +386 (0)1 300 03 73Fax: +386 (0)1 433 04 57

South AfricaEBV ElectrolinkZA - 2157 Woodmead, JohannesburgWoodlands Office Park141 Western Service RoadBuilding 14-2nd FloorTel: +27 (0) 11 236 19 00Fax: +27 (0) 11 236 19 13

EBV ElectrolinkZA - 8001 Foreshore, Capetown Fleetway House 5th floorMartin Hammerschlag WayTel: +27 (0) 21 421 53 50Fax: +27 (0) 21 419 62 56

EBV ElectrolinkZA - Glenmore, Durban 4001236 Queen Mary AveTel: +27 (0)31 205 12 05Fax: +27 (0)31 205 22 65




▲Back


Contents

SpainEBV Elektronik GmbHE-08950 Esplugues de Llobregat (Barcelona)Anton Fortuny, 14-16 Esc C 3o 2aTel: +34 93 473 32 00Fax: +34 93 473 63 89

EBV Elektronik GmbHE-28760 Tres Cantos / MadridC/Ronda de Poniente, 4Centro Empresarial EuronovaTel: +34 91 804 32 56Fax: +34 91 804 41 03

SagitronC/ Montón de Trigo 2,esq. avda. de la Industria28760 Tres Cantos MadridTel: +34 91 8 06 38 00Fax: +34 91 8 06 38 05

SwedenEBV Elektronik GmbHS-19272 Sollentuna, Sjöängsvägen 7Tel: +46 (0)8 59 47 02 30Fax: +46 (0)8 59 47 02 31

EBV Elektronik GmbHS-21235 Malmö, Derbyvägen 20Tel: +46 (0)40 59 21 00Fax: +46 (0)40 59 21 01

SwitzerlandANATEC AG Sumpfstrasse 7, CH-6300 ZugTel: +41 (0)4 748 32 32Fax: +41 (0)4 748 32 31

EBV Elektronik GmbHCH-1010 Lausanne, Av. des Boveresses 52Tel: +41 (0)21 654 01 01Fax: +41 (0)21 654 01 00

EBV Elektronik GmbHCH-8953 Dietikon, Bernstrasse 394Tel: +41 (0)1 745 61 61Fax: +41 (0)1 745 61 00

TurkeyEBV Elektronik GmbHTR-34742 IstanbulBayar Caddesi, Gülbahar Sok. No:17Perdemsaç Plaza, 13th Floor, D:134Kozyatagi,Tel: +90 (0)216 463 13 52Fax: +90 (0)216 463 13 55

United KingdomEBV ElektronikEBV House, 7 Frascati WayMaidenhead, Berkshire, SL6 4UYTel: +44 (0)1628 783 688Fax: +44 (0)1628 783 811

EBV Elektronik144 West George Street Glasgow, G2 2HGTel: +44 (0)141 352 20 50Fax: +44 (0)141 352 20 59

EBV ElektronikManchester International OfficeCentre Suite 5B, Styal RoadManchester, M22 5WBTel: +44 (0)161 499 34 34Fax: +44 (0)161 499 34 74

EBV Elektronik12 Interface Business ParkBincknoll Lane, Wootton BassettWiltshire, SN4 8SYTel: +44 (0)1793 849 933Fax: +44 (0)1793 859 555

GD Technik Limited Tudor House, 24 High Street , Twyford Berkshire RG10 9AGTel: +44 (0)1189 34 22 77 Fax: +44 (0)1189 34 28 96

EUROPEAN REPRESENTATIVES

DenmarkFujitsu Microelectronics EuropeDalvej 25, 2820 GentofteTel: +45 39 40 11 15 Fax: +45 39 40 11 45

IsraelToyo Ram Electronics Ltd.1 Hamasger Street, Raanana 43653 Tel: +972 (0)9 744 30 50Fax: +972 (0)9 760 36 50

Web SitesANATEC AG:

www.anatec.ch EBV Elektronik GmbH:

www.ebv.comGlyn GmbH & Co. KG:

www.glyn.deGD Technik Limited

www.GD-Technik.com Ineltek GmbH:

www.ineltek.deMalpassi srl:

www.malpassi.itMelchioni Electronica SpA:

www.melchioni.itPN Electronics:

www.pne.frSagitron:

www.sagitron.esToyo Ram Electronics Ltd:

www.toyoram.co.il

SALES OFFICES EUROPE

FranceFujitsu Microelectronics Europe GmbH105 rue Jules GuesdeF-92300 Levallois PerretTel: +33 (0)1 55 21 00 40Fax: +33 (0)1 55 21 00 41

GermanyFujitsu Microelectronics Europe GmbHAm Siebenstein 6-10D-63303 Dreieich-BuchschlagTel: +49 (0)61 03 69 00 Fax: +49 (0)61 03 69 01 22

Fujitsu Microelectronics Europe GmbHFrankfurter Ring 211D-80807 MünchenTel: +49 (0)89 32 37 80Fax: +49 (0)89 32 37 81 00

ItalyFujitsu Microelectronics Europe GmbHPalazzo Pitagora - Milano 3 CityVia Ludovico il Moro 4BI-20080 Basiglio, Milano Tel: +39 02 90 45 02 1 Fax: +39 02 90 75 00 87

United KingdomFujitsu Microelectronics Europe GmbHNetwork House, Norreys DriveMaidenhead, Berkshire SL6 4FJTel: +44 (0)1628 50 46 00 Fax: +44 (0)1628 50 46 66

Direct contact to Fujitsu’s Business Unit Multimedia: [email protected]

http://www.ebv.com

http://www.glyn.de

http://www.GD-Technik.com

http://www.inelek.de

http://www.melchioni.it

http://www.malpassi.it

http://www.pne.fr

http://www.toyoram.co.il



http://www.anatec.ch

http://www.sagitron.es

Documents

DVB/MPEG-2 & GRAPHIC CONTROLLER PRODUCTS · DVB/MPEG-2 & GRAPHIC CONTROLLER PRODUCTS ... MPEG-2 Encoder ... capacitance and inductive elements. This means that the only