www.joskin.com/advantage

ADVANTAGE SERIES

WPM12018V-01

MODULO2

3 MODULO2 12,000-l slurry tanker

3 Monocoque structure made of special steel, galvanized inside and outside

3 ADR 100/130 axles with 400 x 80 mm brakes

3 Rear free steering axle

3 Wheels 600/55R26.5 (ALLIANCE) A885 165 D (Ø 1,346 x 611 mm, 7,000 kg per wheel at 40 km/h and 4 bar)

3 Air brakes in proportion to the load

3 Sprung drawbar (cross leaves) for maximum driving comfort and stability

3 2 LED working lights at the back (with control box in the cabin), end outline marker lamps (4 pieces) and LED side marker lights

3 JUROP PN 106 pump (11,000 l/min at atmospheric pressure - 10,000 l/min at 60% vacuum) - 540 rpm speed-increasing gear-box

3 Self-cleaning syphon (30 l)

3 Level float gauge and two oblong indicators (300 x 80 mm)

3 Pre-equipment for not built-in front-JUMBO filling arm, hydrau-lic mixer and 500 x 600 mm hydraulic top hatch (available as an option)

3 Rear buttresses (pre-equipment for rear implement)

Modulo2

Trans-CAP

Drakkar

Tornado3

Volumetra

Trans-KTP

Trans-SPACE

www.joskin.com/en/advantage

With the “Advantage” concept, JOSKIN wanted to prove that it was possible to reduce the price of agricultural machines without having an impact on quality. To get rid of this budget constraint, JOSKIN bet everything on a “mass” production that was until then not used in the agricultural trailer sector. The concerned models are indeed assembled on dedicated assembly lines so as to produce identical series of machines. Producing a large quantity of a model implies more advantageous prices for the raw materials, a more profitable distribution of the workforce and a higher efficiency of the automated industrial machines. The resulting savings have then

a direct impact on the sale price and allow to deliver a high-tech product at the price of a standard one.

Benefit from the attractive prices of our series production!