Are you working with a Fully Certified HEPA vacuum? Only a Full Unit Certified HEPA dust extractor meets the EPA RRP guidelines. Read on to see if you’re covered.

Fa s te r. E a s i e r. S m a r te r.

Dust Extractors

Certified full unit

This extractor has been tested and certified in accordance with IES RP-CC-002 and following guidelines within reference standard IES-RP-CC-0034.1 for HEPA Vacuums to filter and exhaust air particles to 0.3 microns with at least 99.97% efficiency

with no bypass leakage (as required by EPA RRP).

Certified full unit

Magenta = Trim

to learn how festool can help protect you and your business, visit www.rrphepavac.com

Photos are for illustration purposes only and do not constitute or convey proper practices as they pertain to EPA RRP Guidelines.

For all the details, visit www.rrphepavac.com

as of october 2011, all Ct dust extractors shipping from festool have been tested and certified as full unit HePA dust extractors.

So why is that important? If your current vacuum includes a HEPA filter, but lacks Full Unit HEPA Certification, then you are at risk of being cited for noncompliance with EPA RRP regulations.

When it comes to the EPa’s renovation, repair and Paint (RRP) regulations, lead dust is no simple matter. To protect your health from harmful particles and your business from stiff penalties, use a dust extractor tested and certified to meet the highest standards.

While there are numerous manufacturers offering a vac that features a HEPA filter, this falls short of the actual requirements, which specifically call for a perfect seal between the filter and the vac in which it is installed. For full RRP compliance, the unit must meet the requirement for “no bypass leakage,” a critical hurdle on the path to Full Unit HEPA Certification.

Festool has just now completed extensive independent testing, resulting in Full unit HEPa certification for its entire line of CT Dust Extractors. This means that the entire unit is HEPA certified… not just the filter. Each Festool CT Dust Extractor will include a printed certificate in the box as well as labeling on the dust extractor documenting its Full Unit HEPA Certification.

Full Unit Certification on any Festool CT Dust Extractor (CT MINI, CT MIDI, CT 26, CT 36, CT 48) is contingent on the installation of the new Festool branded HEPA filter and the possession of a Festool-issued certificate, in addition to regular service and replacement thereof. To find out if your unit is already compliant, or to learn how to make it so, please visit www.rrphepavac.com

CT MINI CT MIDI CT 26 CT 36 CT 48

Find a retailer at festoolusa.com/dealers | 1-888-337-8600 (8am - 5pm EST)

GiveawayNovember 2011A

$1,611 value!

Festool is not responsible for typographical errors. Prices are subject to change and are only valid for sales shipped within the United States.

1+2 limited Warranty – Festool warrants that the specified tool will be free from defects in materials and workmanship for a term of 3 years from the date of purchase. And we’ll even cover shipping for the first full year.

30 day Money Back Guarantee – If you are not completely satisfied, return your tool to the selling dealer within 30 days and you will receive a refund of either your purchase price or the lowest retail price at which the same item has been offered since your date of purchase. Freight charges are not refundable.

Dust Extractor CT 26 HEPA $550.00

Circular Saw TS 55 EQ $525.00

Tradesmen Cleaning Set $211.00

Guide Rail Accessory Kit FS-SYS/2 $184.00

Turbo Suction Brush $110.00

Self-Cleaning Filter Bags 5x $31.00

a new giveaway

every month!

register to win each month at www.festoolsweepstakes.com

Scan to go straight to our entry page!

festool System SweepstakesThe Ultimate Remodelers Set

See website for complete contest details, including rules and restrictions.

CT MIDI

CT 26

CT 36

CT 48

CT MINI

Dust Extractors

Certified full unit

Ct 48Ct Mini• HEPA• 2.6 gallon• 137 CFM• 19.2 lbs

Ct Midi• HEPA• 3.96 gallon• 137 CFM• 19.8 lbs

Ct 26• HEPA• 6.9 gallon• 137 CFM• 28.7 lbs

Ct 36• HEPA• 9.5 gallon• 137 CFM• 29.8 lbs

• HEPA• 12.7 gallon• 137 CFM• 35.9 lbs

$385.00583 360

$435.00583 376

$550.00583 492

$600.00583 493

$650.00584 084

$472.50$525.00

ffor a full listing of related tools and accessories, visit or a full listing of related tools and accessories, visit www.rrphepavac.com

|571 810

|570 789

$261.00$290.00

The ultimate solution for rapid stock removal, the RAS has the torque and speed to power through the toughest surfaces with ease. Integrated dust extraction, paired with a rotating dust shroud saves tremendous time on cleanup while extending abrasive life.

$382.50$425.00

|571 782

Powerful and compact, the RO 125 excels at the full range of sanding applications, from stripping tough surfaces to fine finishing. Excellent for tackling difficult finishes on smaller work surfaces such as windows and door frames.

Aggressive rotary action strips stubborn materials with ease, while finish mode helps you achieve the smoothest of surfaces. Cover large areas faster and more efficiently with a 6” pad. Industry-leading dust extraction captures up to 99% of dust, leaving both a clean surface and jobsite.

$337.50$375.00

The RO 90 pairs the dual mode capability of a Rotex sander with detail sanding functionality, so you can use a single tool for all your sanding tasks. Switch from a round to triangular pad in seconds for finishing narrow strips like casing, window frames, doors and other trim.

|571 823

There’s a reason Festool leads the industry in Dust Extraction solutions. Ask anyone and they’ll tell you that we take dust control very seriously, helping you capture potentially harmful dust from the point of creation all the way to disposal. It’s this system approach to the finest details that will get you in and out of jobsites cleanly and efficiently, so the only thing you leave behind is a satisfied client.

Sanding

Cleaning

Why spend time and money cleaning up after the fact when you can capture up to 99% of dust at the source? Festool sanders are designed to contain particles before they escape into the air, helping you maintain a cleaner, safer jobsite from start to finish. Now through November 30, 2011 save an additional 10% on these sanders plus select accessories. Visit promo.festoolusa.com for details.

learn how you can save even more with package pricing, visit www.rrphepavac.com

systEm tools anD accEssoriEs

497 700

$211.00

Heavy-duty stainless steel cleaning set is built for durability, ideal for keeping your shop or jobsite clean. Supplied with 36mm anti-static hose, floor nozzle, upholstery brush, crevice nozzle, round brush, and stainless steel tubes in a Systainer SYS 5.

450 644

$110.00

Helping you meet EPA RRP requirements for jobsite cleaning tasks, a suction-activated beater bar extracts fine dust from most any surface, especially carpets.

CT MINI

This extractor has been tested and certified in accordance with IES RP-CC-002 and following guidelines within reference standard IES-RP-CC-0034.1 for HEPA Vacuums to filter and exhaust air particles to 0.3 microns with at least 99.97% efficiency

with no bypass leakage (as required by EPA RRP).

Certified full unit

Magenta = Trim

Sander Promotion terms and conditions: This limited time promotion applies only to select round pad sanders, abrasives, and accessories. Does not apply to purchases made before October 1, or after November 30, 2011. Festool reserves the right to change or end this campaign at its discretion. Not valid for TTS employee purchases or dealer employee purchases. Offer good only at participating dealers.

Self-Cleaning Filter Bags eliminate dust cake, so you reach near 100% capacity before switching to a new bag, saving you time on changeover as well as replacement costs. Plus, you’ll greatly extend the life of both your CT and its HEPA filter by pre-filtering fine dust particles. (5 pieces)

498 410 $22.00

498 411 $28.00

496 187 $31.00

496 186 $35.50

497 539 $40.00

Festool’s all-new Granat is an incredibly durable, ultra-versatile abrasive for sanding a wide range of materials, including stubborn paints, bare wood, plastics and solid surface.

See catalog or website for full range of grits and sander compatibility.

www.festoolusa.com

40 1500

GrIT rANGE

“As a contractor, consultant and EPA RRP instructor I’m very excited to know that I can use my CT Dust Extractor to comply with the EPA regulations regarding containment, collection and cleaning of lead dust particles.”

Bill robinson New Orleans, LA

CT MIDI

CT 26

CT 36

CT 48

CT MINI

Dust Extractors

Certified full unit

• HEPA• 2.6 gallon• 137 CFM• 19.2 lbs

• HEPA• 3.96 gallon• 137 CFM• 19.8 lbs

• HEPA• 6.9 gallon• 137 CFM• 28.7 lbs

• HEPA• 9.5 gallon• 137 CFM• 29.8 lbs

• HEPA• 12.7 gallon• 137 CFM• 35.9 lbs

$385.00583 360

$435.00583 376

$550.00583 492

$600.00583 493

$650.00584 084

$472.50$525.00

www.rrphepavac.com

rotex rO 150 | 6” Sander571 810

rAS 115 | 4-1/2” Sander570 789

$261.00$290.00

The ultimate solution for rapid stock removal, the RAS has the torque and speed to power through the toughest surfaces with ease. Integrated dust extraction, paired with a rotating dust shroud saves tremendous time on cleanup while extending abrasive life.

$382.50$425.00

rotex rO 125 | 5” Sander571 782

Powerful and compact, the RO 125 excels at the full range of sanding applications, from stripping tough surfaces to fine finishing. Excellent for tackling difficult finishes on smaller work surfaces such as windows and door frames.

Aggressive rotary action strips stubborn materials with ease, while finish mode helps you achieve the smoothest of surfaces. Cover large areas faster and more efficiently with a 6” pad. Industry-leading dust extraction captures up to 99% of dust, leaving both a clean surface and jobsite.

$337.50$375.00

The RO 90 pairs the dual mode capability of a Rotex sander with detail sanding functionality, so you can use a single tool for all your sanding tasks. Switch from a round to triangular pad in seconds for finishing narrow strips like casing, window frames, doors and other trim.

rotex rO 90 | 3-1/2” Sander571 823

There’s a reason Festool leads the industry in Dust Extraction solutions. Ask anyone and they’ll tell you that we take dust control very seriously, helping you capture potentially harmful dust from the point of creation all the way to disposal. It’s this system approach to the finest details that will get you in and out of jobsites cleanly and efficiently, so the only thing you leave behind is a satisfied client.

Sanding

Cleaning

Why spend time and money cleaning up after the fact when you can capture up to 99% of dust at the source? Festool sanders are designed to contain particles before they escape into the air, helping you maintain a cleaner, safer jobsite from start to finish. Now through November 30, 2011 save an additional 10% on these sanders plus select accessories. Visit promo.festoolusa.com for details.

www.rrphepavac.com

systEm tools anD accEssoriEs

tradesperson Cleaning Set497 700

$211.00

Heavy-duty stainless steel cleaning set is built for durability, ideal for keeping your shop or jobsite clean. Supplied with 36mm anti-static hose, floor nozzle, upholstery brush, crevice nozzle, round brush, and stainless steel tubes in a Systainer SYS 5.

turbo Suction Brush (Beater Bar)450 644

$110.00

Helping you meet EPA RRP requirements for jobsite cleaning tasks, a suction-activated beater bar extracts fine dust from most any surface, especially carpets.

This extractor has been tested and certified in accordance with IES RP-CC-002 and following guidelines within reference standard IES-RP-CC-0034.1 for HEPA Vacuums to filter and exhaust air particles to 0.3 microns with at least 99.97% efficiency

with no bypass leakage (as required by EPA RRP).

Certified full unit

Magenta = Trim

Sander Promotion terms and conditions: This limited time promotion applies only to select round pad sanders, abrasives, and accessories. Does not apply to purchases made before October 1, or after November 30, 2011. Festool reserves the right to change or end this campaign at its discretion. Not valid for TTS employee purchases or dealer employee purchases. Offer good only at participating dealers.

Self-Cleaning filter BagsSelf-Cleaning Filter Bags eliminate dust cake, so you reach near 100% capacity before switching to a new bag, saving you time on changeover as well as replacement costs. Plus, you’ll greatly extend the life of both your CT and its HEPA filter by pre-filtering fine dust particles. (5 pieces)

Ct Mini 498 410 $22.00

Ct Midi 498 411 $28.00

Ct 26 496 187 $31.00

Ct 36 496 186 $35.50

Ct 48 497 539 $40.00

Granat AbrasiveGranat AbrasiveFestool’s all-new Granat is an incredibly durable, ultra-versatile abrasive for sanding a wide range of materials, including stubborn paints, bare wood, plastics and solid surface.

See catalog or website for full range of grits and sander compatibility.

www.festoolusa.com

40 1500

GrIT rANGE

r571 810

Sanding

s

Bill robinson New Orleans, LA