DuraTape ES Indoor - Duralamp · 0.375” 0.20” PRDE Aluminum channel with dual lens for dual tape runs illuminating in opposite directions. PRDSAP Aluminum channel with curved

Details

DURATAPETM ESIP20 INDOOR & IP65 DAMP

05.30.15 - Page 1 of 7

MODEL(S)

PROJECT TYPE

Duratape™

Ordering GuideLED COLORWATTAGE

30 = 3.0 W/ft39 = 3.9 W/ft44 = 4.4W/ft

VOLTAGE

24 = 24 VDC22 = 2200°K24 = 2400°K27 = 2700°K30 = 3000°K35 = 3500°K

IP RATING

I = Indoor IP20

D=Damp IP65 Sleeve

SEE PAGE 4 FOR POWER SUPPLIES

MODEL INTENSITY

ES = Extra Narrow Spacing

Dimensional Drawings

LED DataModel Wattage Viewing Angle Lifespan at 90% drive

Standard 3.0W/ft 0.08W per LED 120° 60,000hrs

High Output 3.9W/ft 0.10W per LED 50,000hrs

Ultra Output 4.4W/ft 0.12W per LED 40,000hrs

* LEDs operating at 90% of LED manufacturers maximum current rating.

Fixture DataModelIndoor 3000°K LED color

Efficacy* Lm/Wt Lm/Ft Wt/Ft Wt/LED

Standard 3.0W/ft 60.00* 180 3.0 0.08

High output 3.9W/ft 76.41* 298 3.9 0.10

Ultra output 4.4W/ft 81.27* 357 4.4 0.12

* Meets Title 24 High efficacy rating.

Duralamp - Duratape ES (XS) Static Indoor

Duralamp - Duratape Static Indoor. With option PVC sleeve

0.40"

0.33" O.C.

Key Features• Energy efficient LED flexible linear light strip for

continuous consistant color in linear applications• Ideal for IP20 interior or IP65 (with optional sleeve)

location applications such as cove, under-counter/cabinet, and lighting accents

• Sold per foot and manufactured to specified lengths with factory attached end preps

• All Duratape features 2-circuit substrate for optimum heat dissipation, minimizing voltage drop while increasing run lengths per power feed, standardizing electrical flow over entire length of the strip for maximum product reliability

• All Duratape features double sided solder points for maximum conductivity and durability

• Pre-assembled to specific lengths with various connector options for project requirements and efficient power configuration

• Max continuous length: up to 19’ per run (3.9W/ft) up to 22’ per run (3.0W/ft) up to 15’ per run (4.4W/ft)

• Multiple dimming options available

Spacing 0.33” OC LED Spacing

LEDs 36 LEDs per foot

Color Temp Available in 2200°K, 2400°K, 2700°K, 3000°K and 3500°KAdvanced LED binning with +/- 2-step MacAdams ellipse

End Preps Factory prepped end preps available (See Page 2)

Field Cuts See page 2 for cut zones

Mounting Includes installation-ready 3M tape adhesive for simplified installation directly to mounting channel or application surface

Lens Options Optional lens covers with choice of clear, frosted 10% for indirect use, frosted 30% for direct view or frosted 60% for full diffusion

Installation Optional mounting channels and clips, protective lens covers, thermal channels and heat transfer tape for optimal maintainance. Field trimmable every 4”

Power Supply Listed Class II 24 VDC power supply required

Listing cULus / CE listed

Compliance ROHS compliant

Warranty 3 year warranty

Narrow spacing ES TapelightEnergy Efficient LED flexible linear light strip for continuous

consistent color in linear applications. Extremely flexible and adjustable lengths for varied architectural applications.

DL ES 24



0.48"

IP20 Indoor

5/16”O.C.

13/32”

Duralamp - Duratape Static Indoor


0.08"

IP65 Damp

5/16”O.C.

13/32”



5/16”O.C.

13/32”



0.16"

5/16”O.C.

13/32”



Copyright © 2015 Duralamp USA – A Targetti Group Company - 3184-C Airway Ave. Costa Mesa, CA 92626 - Phone (714) 513-1991 - Email: [email protected] - www.duralampusa.com

DURATAPETM ES IP20 INDOOR & IP65 DAMP

ASingle lead wire prep. 24” Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end.

BDouble ended lead wire prep. 24” lead wire at both ends.One end can be used for power connectivity while the other end can be used for a jumper cable to run to an additional length of Duratape. Caution: Pay attention to max run lengths and voltage drops from total lead/jumper wire lengths.

CJumper cable (specified length)Jumper cables can be factory attached to Duratape to meet your specified installation requirements. Jumper lengths available as 1”, 2”, 3”, 4”, 6”, 12”. Add length number to end of part number. Caution: Pay attention to max run lengths and voltage drops from total lead/jumper wire lengths.

Field Cut DetailsDuratape can be field cut to accomodate most installations, by cutting at the indicated field cut sections.

Caution! Field cutting should only be done before connection power.

D12” Additional lead wire Purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length.



4"

07UI1CBL1

07UI1CBL2

07UI1JMPCBL-XX

07UI1ADDCBL

EAdditional connectors. Lead wire connectors 2/ea per connection.

07UI1ADDCON

F

24” Additionallead wire

lead wire using the newlockable interconnect

A DC

H G

F F

FRemovable/lockable interconnect lead wire. 24” lead wire with locking and unlocking lead connector.

07UI1LICON

G

GDuratape segment. Wire fold 1” 18ga wire factory attached between specified lengths of segments (4” intervals only).

DL-ES-FOLD-I-1



A DC

H G

F F

Wiring Options

A B C



A DC

H G

F F

D E



A DC

H G

F F24” Additional

lead wirelead wire using the new

lockable interconnect

A DC

H G

F F



A DC

H G

F F24” Additional

lead wirelead wire using the new

lockable interconnect

A DC

H G

F F

5/16”O.C.

13/32”



Duratape features solder points for maximum continuity for long lifespan.

0.08"

IP20 Indoor IP65 Damp

5/16”O.C.

13/32”



5/16”O.C.

13/32”



0.16"

5/16”O.C.

13/32”



05.30.15 - Page 2 of 7Copyright © 2015 Duralamp USA – A Targetti Group Company - 3184-C Airway Ave. Costa Mesa, CA 92626 - Phone (714) 513-1991 - Email: [email protected] - www.duralampusa.com


Mounting Accessories

DL-HT-TAPE1/2” wide thermally conductive mounting tape. Factory attached and sold per foot.

DL-HS-TAPE2” wide aluminum foil tape, used to create a flexible thermal sink. Sold in 100’ rolls.

DL-ES-FOLD-I-1Wire fold 1” 18ga wire factory attached between specified lengths of segments (in 4” intervals). For curved applications that require lateral bends for upward illumination.

DL-ES-FOLD-I-XSpecified lengths of 18ga wire fold.

DL-1-LICDuratape lockable interconnect. Can be unlocked for easy replacement or maintenance.

DL-1-LIC-90Duratape 90º lockable interconnect. Can be unlocked for easy replacement or maintenance.

DL-ALUM-U-4Low profile aluminum U-Channel for linear run lengths, available in 4’ lengths.1/2” ID, 5/8” OD, 1/4” H

DL-ALUM-L-4Low profile aluminum 1/2” x 1/2” L-Channel for linear run lengths. Duratape can be mounted at either 0º or 90º mounting positions. Available in 4’ lengths.

DL-I-MCHAN-8Mounting channel, sold in 8 foot lengths. Can be used with Duratape (no PVC sleeve) and outdoor Duratape (with PVC sleeve) for linear applications.

DL-I-45-MCH-445° mounting base, sold in 4 foot lengths. Used with Duratape (no PVC sleeve) for 45° mounted linear applications.

DL-I-45-CVR-4-C (Clear)DL-I-45-CVR-4-F/10/F30/F60 (Frosted)45° mounting base cover, sold in 4 foot lengths.

DL-I-2PC-C (Clear)DL-I-2PC-F10/F30/F60 (Frosted)Two-piece mounting tube; base (clear) with cover, sold in 8 foot lengths. Used with Duratape (no PVC sleeve) for linear applications. Clear or frosted at 3 diffusion levels, 10%, 30% or 60%.

0.69”

0.63”

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

0.20”

0.66”

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

0.20”

0.375”

0.66”

0.62”

DL-1-LIC-FOLD-1Duratape lockable interconnect with flexible 1” 18ga wire fold.

DL-1-LIC-FOLD-XDuratape lockable interconnect with flexible (specified lengths) 18ga wire fold.

DL-EC-20 Silicone end cap for termination of IP20 tape.

DL-EC-65 Silicone end cap for termination of IP65 tape.

DL-SLEEVE-CLP-65 Sleeve mounting clips. Package of 10 each for 5 ft section.



17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

17mm

19.2mm

22mm24.8mm

0.66”

0.20”

0.66”

0.62”

0.375”

0.20”

PRDEAluminum channel with dual lens for dual tape runs illuminating in opposite directions.

PRDSAPAluminum channel with curved lens for dual tape runs for unique lighting effects.

PRDSANAluminum channel with curved lens for 45º angled dual tape run illumination.

0.63”

0.75”0.50”0.47” 0.76”

0.63” 0.63”1.00”

2.00” 2.00”

2.00”2.00”

3.75”

1.38”

PRAN2045º aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. Available in 4’ lengths.

DL-AL-CHAN-20-LENSFrosted lens, available in 4’ lengths.

DL-AL-CHAN-20-45EC-145º end cap with hole for interconnectivity.

DL-AL-CHAN-20-45EC-245º end cap with no hole for run length termination.

DL-AL-CH-45-C-IMounting clip for indoor aluminum channel.

PRIN20Flush mount aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. Available in 4’ lengths.


DL-AL-CHAN-20-EC-1End cap with hole for interconnectivity.

DL-AL-CHAN-20-EC-2End cap with no hole for run length termination.

DL-AL-CH-WOC-IMounting clip for indoor aluminum channel.

PRAP20Surface mount aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover. Suitable for IP65 and IP66 installation applications. Available in 4’ lengths.


DL-AL-CHAN-20-EC-1End cap with hole for interconnectivity.

DL-AL-CHAN-20-EC-2End cap with no hole for run length termination.

DL-AL-CH-WOC-IMounting clip for indoor aluminum channel.

PRINTCRecessed aluminum channel for walk-over inground applications, includes frosted polycarbonate cover. Suitable for IP65 and IP66 installation applications. Available in 4’ lengths.

DL-AL-CHAN-WOEC-1End cap with hole for interconnectivity.

DL-AL-CHAN-WOEC-2End cap with no hole for run length termination.

DL-AL-CH-WOCMounting clip for indoor aluminum channel.

0.50”

0.50”

Profiles

50,5

5 m

m 12,4 mm

12,5 mm

47,4 mm

50 mm

49,7

mm

50 mm

12,42 mm

85 mm

47,4 mm

35 m

m

33 m

m

we changed the color fo the back slide because this is aluminum as the rest of the channel, while we colored bluish the polycarb screens, psl note

19,4

mm

16 mm

25 mm

8 m

m



54 LINES OF LIGHT FOR GENERAL LIGHTING

DURAPROFILE PLUS DOUBLE EMISSION ARCHITECTURAL PROFILE

DURAPROFILE PLUS - ALUMINIUM DOUBLE EMISSION PROFILE *

Code Description L Barcode80119058

new PRDESO Double emission aluminium profile 1220 39970 1new PRDESO-SL Rear support for surface mount 1220 39987 1new PRDESO-FL Front screen in flat opal polycarbonate plate 1220 39994 1new PRDESO-FLR Couple of opal polycarbonate rear screen 1220 40020 1new KTPRDESO-FL Set of two side caps flat screen - 40068 1new KTPRDESO Suspension kit - 40051 1

* Available upon request.

Linear architectural pro�le con�gurable in direct, indirect emission or both, for high levels of light emission . The direct emission is con�gurable with the use of 1 to 4 strips; indirect emission foresees two strips . Mounting: on ceiling for unidirectional or suspended for unidirectional or double emission. The aluminium pro�le is completed, depending on the application chosen, with screens (�at front and rear pair of screens for indirect emission), side closure caps and suspension kit .

For ceiling mounting the rear support is required, code PRDESO-SL, on which the pro�le can be attached . Compartment inside the pro�le suitable for the insertion of the power supply and dimmer . Possibility of on/o� switching and dimming separate for direct and indirect lighting.

SUSPENDED MOUNTING WITH TWO STRIPS FOR INDIRECT LIGHTING AND 4 FOR DIRECT LIGHT

CEILING MOUNTING WITH 4 STRIPS FOR DIRECT LIGHT

CEILING MOUNTING WITH 3 STRIPS FOR DIRECT LIGHT

PRDESODouble emission aluminum channel. Available in 4’ lengths.

PRDESO-SLRear support for surface mount. Available in 4’ lengths.

PRDESO-FLFront lens in flat opal polycarbonate plate. Available in 4’ lengths.

PRDESO-FLRCouple of opal polycarbonate rear lens. Available in 4’ lengths.

KTPRDESO-FLSet of two caps flat lens.

KTPRDESOSuspension kit.

Duraprofile Plus - Aluminum Double Emission Profile• Linear architectural profile configurable in direct,

indirect emission or both, for high levels of light emission

• The direct emission is configurable with the use of 1 to 4 Duratape strips; Indirect emission uses two strips

• Mounting: On ceiling for unidirectional or suspended for unidirectional or double emission (direct & indirect)

• Manufactured according to specification, with lens (flat front and rear pair of lens’ for indirect emisison), side closure caps and suspension kit

• Rear support required for ceiling mounting, code PRDESO-SL

• Profile features internal compartment suitable for integral power supply and dimming module (Consult Factory)

• Possibility of on/off switching and dimming separate for direct and indirect lighting



Power Supplies

Electronic Driver Magnetic Transformer

DuraLamp S.p.A.- A brand of Targetti Poulsen Industries •P.IVA • E-mail:[email protected]

Ver. 1.1 06-2014foegaP

LineVoltage

Input

Duratape

UL listedJ-box

by others

Wiring fromtransformer to

J-box must be toClass II standard.

Refer to NECand local coderequirements.

PowerSupply

LineVoltage

Input

Duratape

UL listedJ-box

by others




PowerSupply

LineVoltage

Input

Duratape

UL listedJ-box

by others




PowerSupply

Electronic Driverin Enclosure

LineVoltage

Input

Duratape

UL listedJ-box

by others




PowerSupply

Cat No Type Voltage Wattage Listing Dimensions Dimmable

DEL-I-120-1-4-24 Electronic 90-305V AC / 24V DC 96W / 1X4A** cULus 10”W X 10”L 4”D* No

DEL-I-240-2-4-24 90-305V AC / 24V DC 192W / 2X4A** cULus 10”W X 10”L 4”D*

DEL-I-320-3-4-24 90-305V AC / 24V DC 288W / 3x4A** cULus 10”W X 10”L 4”D*

DEL-120-1-4-24 90-305V AC / 24V DC 96W / 1X4A** UL/CE 2.67”W X 9.66”L 1.53”D

DEL-I-120-1-4-24-D 90-305V AC / 24V DC 96W / 1X4A** cULus 10”W X 10”L 4”D* Integral 0-10V dimming interface

DEL-I-240-2-4-24-D 90-305V AC / 24V DC 192W / 2X4A** cULus 10”W X 10”L 4”D*

DEL-I-320-3-4-24-D 90-305V AC / 24V DC 288W / 3x4A** cULus 10”W X 10”L 4”D*

DMG-40-1-1.6-24 Magnetic 120V AC / 24V DC 40W / 1X1.6A** cETLus 2.00”W X 5.06”L 2.14”D YesTriac/MLVDMG-60-1-2.4-24 120V AC / 24V DC 60W / 1X2.4A** cETLus 2.25”W X 6.55”L 2.55”D

DMG-120-1-4-24 120V AC / 24V DC 96W / 1X4A** cETLus 3.00”W X 9.80”L 3.00”D

DMG-192-2-4-24 120V AC / 24V DC 192W / 2X4A** cETLus 3.00”W X 9.80”L 3.00”D

* Dimensions include enclosure with mounting bracket** 4A maximum current protection for each seconday circuit*** Constant voltage drivers 50HZ , voltage regulated with short circuit protection. operating temperature -40 C- 80° C

Electronic Driver Magnetic Transformer

Electronic DriversFor use with 0-10V interface (DLD-1-10) for secondary side dimming control. Generally used for programmable dimming levels for changing scenarios.

Magnetic TransformersFor use with primary side dimming with an MLV forward phase dimming system (supplied by others). Generally used for a pre-set dimming level.



DimmersCat No Type Voltage Max Load Dimensions

D-MG-600 Magnetic 120VAC/120VAC 450W Single Gang Box - Recessed

D-MG-600H 277VAC/277VAC 450W Single Gang Box - Recessed

D-MG-1000 120VAC/120VAC 800W Dual Gang Box - Recessed

D-MG-1000H 277VAC/277VAC 800W Dual Gang Box - Recessed

DLD-1-10 Electronic SEL V: 10-24VControl: 0-10V (< 0.6 mA)

96W 1.5”W X 7”L X 0.75”DSingle Gang

Dimmer

V+ V- N L

System Layout Example Diagram

DLD-1-10Dimming Module

-DIM

1 LED Output 2+ - +

t 24V DC Input+ - +

Osram-DIM

1 LED Output 2- + - +

- + - +

-DIM

LED Output 1 LED Output 2- + - +

0-10V Input 24V DC Input- + - +

OT 1OT 2OT 3

-DIM

1 LED Output 2+ - +

t 24V DC Input+ - +

Osram-DIM


- + - +

-DIM



OT 1OT 2OT 3

-DIM

1 LED Output 2+ - +

t 24V DC Input+ - +

Osram-DIM


- + - +



Standard Dimmable Power Supplies

DEL-I-120-1-4-24DEL-I-240-2-4-24DEL-I-320-3-4-24

Integral Dimming(0-10V)

Power SuppliesDEL-I-120-1-4-24-DDEL-I-240-2-4-24-DDEL-I-320-3-4-24-D

Positive

Negative

Hot

NeutralGround

positivenegative

positivenegative

positivenegative


Documents

DuraTape ES Indoor - Duralamp · 0.375” 0.20” PRDE Aluminum channel with dual lens for dual tape runs illuminating in opposite directions. PRDSAP Aluminum channel with curved