Duo-Vac Oven Ultra Clean Oven - Cole-Parmer · • Ultra Clean® ovens, with or without HEPA filters—meet the strict requirements of semiconductor, electronic component, and clean

Ovens—Imperial V Ovens . . . . . . . . . . . . . . . . . . . . .111–115High Temperature Bench Ovens . . . . . . . . . 1 1 6L-C Ovens . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 7Ultra Clean “100” Ovens . . . . . . . . . . . . .118–119Class 100 Cabinet Ovens . . . . . . . . . . . . . . . 1 2 0

Vacuum Ovens . . . . . . . . . . . . . . . . . . . . . . . 1 2 1Duo-Vac Ovens . . . . . . . . . . . . . . . . . . . . . . . 1 2 2Moisture Determination Ovens . . . . . . . . . . 1 2 3Hi-Temp “Squaroid” Vacuum Ovens . . . . . . 1 2 4Sterilizer/Dryer . . . . . . . . . . . . . . . . . . . . 1 2 5Vertical Air Flow Cabinet Ovens . . . . . . . . . 1 2 6Horizontal Air Flow Cabinet Ovens . . . . . . . 1 2 7

Lab-Line ovens combine quality components withdurable construction to provide dependableoperation. Our exclusive air flow system speeds recovery time and ensuresexcellent temperature uniformity.

We offer a wide variety of products and model lines, including:

• Imperial V laboratory ovens—featuring hydraulic or microprocessor controland gravity or mechanical convection;

• Economical L-C ovens—built with the budget-conscious laboratory in mind;

• Ultra Clean ® ovens, with or without HEPA filters—meet the strictrequirements of semiconductor, electronic component, and clean room

L-C Oven with LED Display

Duo-Vac Oven Ultra Clean Oven

Squaroid Vacuum Oven

OV

EN

S

• Nine models available

• Hydraulic thermostat ormicroprocessor temperaturecontrol

• Gravity or mechanicalconvection

• Operating temperatures to300°C on microprocessor-controlled units

• Built-in over-temperatureprotection of samples

• Corrosion-resistant, easy-to-clean stainless steel interiors

• Sturdy enameled steel exteriorconstruction

• UL listed and CSA certified

Hydraulic Thermostat GravityConvection Ovens

♦ Dual independent hydraulic thermostat control

♦ User set over-temperature protection in case ofprimary control failure

♦ Indicator lights show which thermostat is controllingtemperature

♦ Oven temperature can be monitored with a mercurythermometer in the top of oven (not included)

Hydraulic Thermostat MechanicalConvection Ovens




♦ Convenient LED temperature display

♦ Lab-Line’s exclusive convection air flow system

P.I.D. Microprocessor-ControlledMechanical Convection Ovens

♦ Most accurate and reproducible temperature control

♦ Independent, adjustable hydraulic thermostat backup in case of microprocessor failure

♦ Simultaneous display of set temperature and actualmeasured temperature


The Lab-Line Exclusive Air Flow System

♦ Constant speed induction motor drivesblower to circulate air throughoutchamber

♦ Heated air is forced up sides of ovenchamber to openings in sidewallplenums

♦ Heated air is then drawn down throughcenter of oven chamber, reheated, andrecirculated

OV

EN

S

ORDERING INFORMATION

Chamber Dimensions Exterior Dimensions Volume Net Wt. Ship Wt.W" x D" x H" W" x D" x H" cu. ft. lbs. lbs.

Model Volts* Amps Watts (cm) (cm) (<) (kg) (kg)

3471 120 10 15 x 171⁄8 x 191⁄2 215⁄8 x 251⁄4 x 351⁄2 2.9 130 150

3471-1 240 51200 (38 x 43 x 50) (55 x 64 x 90) (82.1) (59) (68)

3476 120 15 20 x 171⁄8 x 191⁄2 265⁄8 x 251⁄4 x 351⁄2 3.8 140 155

3476-1 240 7.5 (51 x 43 x 50) (68 x 64 x 90) (107.6) (64) (70)

3478 120 151800

25 x 171⁄8 x 191⁄2 315⁄8 x 251⁄4 x 351⁄2 4.8 160 180

3478-1 240 7.5 (64 x 43 x 50) (80 x 64 x 90) (135.9) (73) (82)

*All models are 50/60 Hz

ADDITIONAL SHELVES

Model Shelf

3471, 3471-1 3471-8

3476, 3476-1 3476-8

3478, 3478-1 3478-8

(Brackets included)

• Designed for general laboratory usewhen precise temperature controland uniformity are not criticalconsiderations

• Dual independent hydraulicthermostats

• Safety backup thermostat providesover-temperature protection

• 24 month warranty

Imperial V Gravity Convection Ovens

♦ Vents in oven top and floor enhance naturalconvection



♦ Oven temperature can be monitored with a mercurythermometer in the top of oven (not included)

♦ Temperature range to 270°C

♦ Plug-style door construction guards against heat lossfrom work chamber

♦ Stainless steel plenums designed for optimal air flow and uniformity

♦ Drawer-style recessed control panel is protectedfrom spills, slides out for easy maintenance

♦ Interior walls constructed of corrosion-resistant,

easy-to-clean stainless steel

♦ Two adjustable chrome-plated wire shelves includedstandard

♦ Shelves, supports, and plenums remove quickly andeasily for cleaning

♦ Heavy-duty cold-rolled steel exterior is reinforcedat stress points

Model 3471




3471M 120 10.8 13 x 171⁄8 x 191⁄2 215⁄8 x 251⁄4 x 351⁄2 2.5 130 150

3471M-1 240 5.41300 (33 x 43 x 50) (55 x 64 x 90) (70.8) (59) (68)

3476M 120 15.8 18 x 171⁄8 x 191⁄2 265⁄8 x 251⁄4 x 351⁄2 3.5 142 170

3476M-1 240 7.9 (46 x 43 x 50) (68 x 64 x 90) (99.1) (64) (77)

3478M 120 15.81900

23 x 171⁄8 x 191⁄2 315⁄8 x 251⁄4 x 351⁄2 4.4 165 185

3478M-1 240 7.9 (58 x 43 x 50) (80 x 64 x 90) (124.6) (75) (84)


ADDITIONAL SHELVES

Model Shelf

3471M, 3471M-1 3471M-8

3476M, 3476M-1 3476M-8

3478M, 3478M-1 3478M-8

(Brackets included)

OPERATING SPECIFICATIONS

Rise Time Maximum Control Uniformity Control UniformityModel (Ambient to 200°C) Temp. @ 100°C @ 100°C @ 200°C @ 200°C

3471M3471M-1

3476M3476M-1

60 minutes 270°C ±1.0°C ±1.5°C ±1.0°C ±2.0°C

3478M3478M-1

• Dependable hydraulic thermostattemperature control plus mechanicalconvection for improved performance

• Convenient digital temperaturedisplay

• Backup thermostat protects samples in case of primary control failure


Imperial V Mechanical Convection Ovens







♦ Interior walls constructed of corrosion-resistant, easy-to-clean stainless steel

♦ Two adjustable chrome-plated wire shelves includedstandard


♦ 3" fiberglass insulation helps retain heat in workchamber

♦ Heavy-duty cold-rolled steel exterior is reinforcedat stress points

♦ One piece silicone gasket and positive locking doorlatch prevent heat loss


®Model 3478M

OV

EN

S

OV

EN

S




3481M 120 10.8 13 x 171⁄8 x 191⁄2 215⁄8 x 251⁄4 x 351⁄2 2.5 125 150

3481M-1 240 5.41300 (33 x 43 x 50) (55 x 64 x 90) (70.8) (57) (68)

3486M 120 15.8 18 x 171⁄8 x 191⁄2 265⁄8 x 251⁄4 x 351⁄2 3.5 155 170

3486M-1 240 8.0 (46 x 43 x 50) (47 x 34 x 57) (99.1) (70) (77)

3488M 120 15.81900

23 x 171⁄8 x 191⁄2 315⁄8 x 251⁄4 x 351⁄2 4.4 165 180

3488M-1 240 8.0 (58 x 43 x 50) (80 x 64 x 90) (124.6) (75) (82)


• P.I.D. microprocessor temperaturecontrol for greatest accuracy,precision, and convenience

• Digitally set temperature for bestrepeatability

• Mechanical convection for improveduniformity, faster rise/recoverytimes


Imperial V Microprocessor-Controlled MechanicalConvection Ovens

♦ Simultaneously shows both programmed and actualtemperatures on easy-to-read LED display.

♦ Platinum RTD temperature sensor reacts instantly tochanges in oven environment for true reading ofchamber temperature

♦ Independent hydraulic thermostat provides excesstemperature backup in the event of controller failure

♦ Panel light indicates whether backup thermostat iscontrolling oven


Model 3486M

ADDITIONAL SHELVES

Model Shelf

3481M, 3481M-1 3471M-8

3486M, 3486M-1 3476M-8

3488M, 3488M-1 3478M-8

(Brackets included)


Rise Time Maximum Control Uniformity Control UniformityModel (Ambient to 200°C) Temp. @ 100°C @ 100°C @ 200°C @ 200°C

3481M3481M-1

3486M3486M-1

40 minutes 300°C ±0.1°C ±1.0°C ±0.2°C ±2.0°C

3488M3488M-1



♦ Two adjustable chrome-plated wire shelves included


♦ 3" fiberglass insulation helps retain heat in workchamber

OV

EN

S

OPTIONS

Model* Description

B Single program controller with 1 program, 2 ramps and 2 dwells. Timer allows you to ramp in minutes and dwell in minutes.

C Four program controller with 4 programs; each program has 8 ramps and 8 dwells. Timer allows you to ramp in minutes and dwell in hours.

D Four program controller with 4 programs; each program has 8 ramps and 8 dwells. Timer allows you to ramp in minutes and dwell in minutes.

T 24 hour timer (not for use with B, C or D options) for use with single setpoint controller (120V/60Hz only).

H 24 hour timer (not for use with B, C or D options) for use with single setpoint controller (240V/50Hz only).

I 24 hour timer (not for use with B, C or D options) for use with single setpoint controller (240V/60Hz only).

*A model 3488M with a single program controller which ramps in minutes and dwells in minutes would be ordered as 3488MB.

Single Setpoint Controller

♦ Simultaneous display of set temperature and actualmeasured temperature

♦ Adjustable high limit safety thermostat maintainstemperature a few degrees above setpoint in the event of primary control failure

Single Program Controller

♦ Programmable—one program with two ramps and twodwells

♦ Ramp adjustable from as low as 0.01°C per minute

♦ Dwell from 0 to 9999 minutes

♦ Adjustable high limit safety thermostat maintainstemperature a few degrees above setpoint in the event

Single Setpoint Controller withOptional Timer

♦ Same features as single setpoint controller withadditional 24 hour timer

♦ Useful for timed heating cycles

♦ Timer can be set for 24 hours in 15 minute

Four Program Controller

♦ Programmable—four programs, each with eightramps and eight dwells

♦ Option “C”—ramp from as low as 1°C per minute,dwell from 0 to 999.9 hours

♦ Option “D”—ramp from as low as 1°C per minute,dwell from 0 to 999.9 minutes

♦ Adjustable high limit safety thermostat maintainstemperature a few degrees above setpoint in the event

Stacking Racks

♦ Allows two ovens the same size to be stacked andoperated safely. Fan removes heat generated bybottom unit, preventing damage to top oven


Imperial V Oven Stacking RackModel No. Model No.

34713471-13471M 3470-2

3471M-1

34763476-13476M 3475-2

3476M-1

3481M3481M-1 3480-2

3486M3486M-1 3485-2

Model 3475-2

OV

EN

S


Chamber Dimensions Exterior Dimensions Volume Ship Wt.W" x D" x H" W" x D" x H" cu. ft. lbs.

Model Volts* Watts (cm) (cm) (<) (kg)

3890A 115 26 x 22 x 13 391⁄2 x 34 x 30 4.3 310

3892A 115 (66 x 56 x 33) (100 x 86 x 76) (122) (140)

3894A 115 2400

26 x 22 x 13 411⁄2 x 35 x 31 4.3 335

3896A 115 (66 x 56 x 13) (105 x 89 x 79) (122) (152)

*Model A-1 is 208V; Model A-2 is 230V. For information about accessories and other voltage options, contact Lab-Line.

a maximum of six shelves

♦ Pilot light indicates when heater is in operation

♦ Models 3890A and 3892A operate from slightlyabove ambient to 427°C (800°F); Model 3892Aincludes recirculating blower for increasedtemperature uniformity and reduced heat-up time

♦ Models 3894A and 3896A operate from slightlyabove ambient to 538°C (1000°F); Model 3896A

• Analog dial temperaturecontroller comes standard—microprocessor-based digitalcontrollers available

• Stainless steel interiorconstruction

• Durable welded steel exteriorhas attractive baked enamelfinish

• Incoloy-sheathed tubular heating

High Temperature Bench Ovens

The economical Lab-Line High Temperature BenchOvens are designed for medium and high temperatureapplications such as tempering, relieving hydrogenembrittlement from plated parts, preheating prior towelding, or stress relief of steel springs and stampings.

♦ Adjustable, resettable over-temperature controllerprotects samples in the event of primary controlsystem failure

♦ High temperature, resilient door gasket withstainless steel spring insert for minimal heat loss

♦ Double doors allow easy loading of large parts orbaskets

♦ Two removable shelves included standard; units hold

See page 35 forFurnaces

Model 3896A

OV

EN

S




GRAVITY CONVECTION

3510 120 4.2 10 x 111/2 x 111/4 121/2 x 131/2 x 18 0.7 28 35

3510-1 240 2.1500 (25 x 29 x 29) (32 x 34 x 46) (19.8) (13) (16)

3511 120 6.7 16 x 111/2 x 161/8 181/2 x 131/2 x 221/2 1.7 45 57

3511-1 240 3.3800 (41 x 29 x 41) (47 x 34 x 57) (48.2) (20) (26)

3512 120 6.7 18 x 131/2 x 22 201/2 x 153/4 x 281/2 3.1 65 80

3512-1 240 3.3800 (46 x 34 x 56) (52 x 40 x 72) (87.8) (30) (36)

3513 120 13.3 28 x 18 x 22 311/8 x 205/8 x 287/8 5.7 115 140

3513-1 240 6.71600 (71 x 46 x 56) (79 x 52 x 73) (161.4) (52) (64)

MECHANICAL CONVECTION

3515M 120 10.0 16 x 111/2 x 16 187/16 x 159/16 x 25 1.7 65 80

3515M-1 240 5.01200

(41 x 29 x 41) (47 x 40 x 64) (48.1) (30) (36)

3516M 120 10.0 18 x 131/2 x 22 207/16 x 1711/16 x 31 3.1 90 1053516M-1 240 5.0

1200(46 x 34 x 56) (52 x 45 x 78) (87.8) (41) (48)


ADDITIONAL SHELVES

Model Shelf

3510, 3510-1 3510-8

3511, 3511-1,3515M, 3515M-1

3511-8

3512, 3512-1,3516M, 3516M-1

3512-8

3513, 3513-1 3513-8


Rise Time Maximum Control UniformityModel (Ambient to 100°C) Temperature @ 100°C @ 100°C

MECHANICAL CONVECTION

3515M

3515M-1

3516M30 minutes 210°C ±4.0°C ±7.0°C

3516M-1

• Compact size conserves valuable bench top space

• Economical—designed for the budget-conscious laboratory

• Available in gravity or mechanicalconvection models


L-C Ovens

♦ Gravity convection models feature—aluminum interiorbimetallic thermostat temperature controlmercury thermometer (not included) temperature

display

♦ Mechanical convection models feature—stainless steel interiorhydraulic thermostat temperature controlLED temperature display

♦ Model 3513 is a two door unit, comes with two fixedand two adjustable shelves

♦ Models 3510, 3511, 3512, and 3513 are UL listed

♦ Temperature range to 210°C

♦ Double wall interior with 1" (25mm) silica-basedinsulation

♦ Durable enamel-finished cold-rolled steel exterior

♦ Pre-set high limit safety thermostat comes standard

♦ One fixed, two adjustable chrome-plated wireshelves are included

®

Model 3515M

OV

EN

S

OPERATING SPECIFICATIONS: UNITS WITHOUT HEPA FILTERS

Single Program Four Program Rise Time Load Temp. Rise Maximum Control UniformityController Controller (Ambient to 200°C) Time*@150°C Temperature @100°C @200°C @100°C @200°C

3490M 3492M3490M-1 3492M-1 22 minutes 8 minutes ±0.1 ±0.2 ±1.0 ±1.53490M-3 3492M-3

3495M-1 3494M-1 18 minutes 4 minutes 250°C ±0.1 ±0.2 ±1.0 ±1.53495M-3 3494M-3

3499M-1 3498M-1 20 minutes 7 minutes ±0.1 ±0.2 ±1.0 ±1.53499M-3 3498M-3

OPERATING SPECIFICATIONS: UNITS WITH HEPA FILTERS

Single Program Four Program Rise Time Recovery Time Maximum Control UniformityController Controller (Ambient to 90°C) @90°C Temperature @90°C @90°C

3497M-1 3496M-13497M-3 3496M-3 11 minutes 22 seconds 250°C ±0.2 ±1.5

NOTE: Performance specifications were measured under controlled laboratory conditions.Your oven’s performance may be slightly different, depending onthe application. Load temperature rise time was determined as follows: After oven temperature stabilized at 150 °C, the oven was loaded with nine 4" waferboats. Boats were evenly distributed in the work chamber. A thermocouple measured the wafer temperature in the center boat. Rise time values representthe time it took for the wafer temperature to reach 90% of setpoint. Recovery time was measured after door was opened 90°C for 1 minute.

• Rapid rise and recovery times plusexcellent uniformity and precisetemperature control

• Choose from models with or withoutHEPA filter

• Meets Class 100 air standards


Ultra Clean ® “100” Ovens

The Lab-Line Ultra Clean “100” Ovens are designed tomeet the strict requirements of semiconductor andelectronic component manufacturing as well as otherclean room industries.

♦ User-friendly PID microprocessor temperaturecontrol

♦ Platinum RTD sensor accurately measures actualchamber temperature

♦ Digitally set temperature for greater repeatability

♦ Adjustable high limit safety thermostat maintainstemperature a few degrees above setpoint in the eventof primary control failure, prevents temperatureovershoot

♦ Drawer-style control panel is protected from spills,easily pulls out for access to internal parts

♦ Features Lab-Line’s exclusive mechanical convectionair flow system

♦ Single program controller comes standard—tworamps and two dwells, ramp adjustable from as lowas 0.01°C per minute, dwell from 0 to 9999 minutes

♦ Four program controller offers eight ramps and eight

dwells, ramp from as low as 1°C per minute, dwellfrom 0 to 999.9 minutes

♦ Corrosion-resistant stainless steel interiorconstruction

♦ Attractive, durable exterior construction of cold-rolled steel finished in white baked enamel

♦ 3" (76 mm) of silica-based insulation between workchamber and exterior walls minimizes heat radiationto surrounding environment

♦ Rigid backing prevents insulation from settling inthe walls

♦ Four adjustable perforated stainless steel shelvescome standard

Model 3496M

OV

EN

S


Single Four Chamber Dimensions Exterior Dimensions Volume Net Wt. Ship Wt.Program Program W" x D" x H" W" x D" x H" cu. ft. lbs. lbs.

Controller Controller Volts* Amps Watts (cm) (cm) (<) (kg) (kg)

3490M 3492M 120 15.8

3490M-1 3492M-1 240 7.91900 13 x 18 x 191⁄2 215⁄8 x 241⁄4 x 35 2.6 180 205

3490M-3 3492M-3 208 10.1 2100(33 x 46 x 50) (55 x 62 x 89) (73.6) (82) (93)

3495M-1 3494M-1 240 12.9 18 x 18 x 191⁄2 265⁄8 x 241⁄4 x 35 3.6 220 2403495M-3 3494M-3 208 14.9 3100 (46 x 46 x 50) (68 x 62 x 89) (101.9) (100) (109)

3497M-1 3496M-1 240 12.9 14 x 18 x 191⁄2 265⁄8 x 241⁄4 x 35 2.8 202 2353497M-3 3496M-3 208 14.9 3100 (36 x 46 x 50) (68 x 62 x 89) (79.2) (92) (107)

3497 3497 Replacement HEPA filter for Models 17 x 31⁄4 x 17—

14 203496M-1, 3496M-3, 3497M-1 and 3497M-3 (43 x 8 x 43) (6) (9)

3499M-1 3498M-1 240 12.9 23 x 18 x 191⁄2 315⁄8 x 241⁄4 x 35 4.6 234 2643499M-3 3498M-3 208 14.9 3100 (58 x 46 x 50) (80 x 62 x 89) (130.2) (106) (120)


ADDITIONAL SHELVES

Model Shelf

3490M, 3490M-1,3490M-3, 3492M, 3490M-83492M-1, 3492M-3

3495M-1, 3495M-3,3494M-1, 3494M-3

3495M-8

3499M-1, 3499M-3,3498M-1, 3498M-3

3499M-8

3497M-1, 3497M-3,3496M-1, 3496M-3

3497M-8

(Brackets included)


Ultra Clean “100” Stacking RackModel No. Model No.

3490M3490M-13490M-33492M 3480-23492M-13492M-3

3495M-13495M-33494M-1 3485-23494M-3

Model 3491

Stacking Racks

♦ Allows two ovens the same size to be stacked for safeoperation

♦ Fan removes heat generated by bottom oven,preventing damage to top unit

♦ Available only for models 3490M, 3492M, 3494M-1, and 3495M-1 series

♦ 120V, 50/60 Hz operation

Additional Features

♦ Adjustable 2" (50 mm) diameter exhaust port

♦ 1 ⁄ 8" (3 mm) N.P.T. fitting for introducing inert gasor house air into the oven chamber

♦ Fused electrical overload safeguards

♦ Flowmeter and 0.3 micron filter for purging withnitrogen only available on units with HEPA filters

Optional Features

♦ Model 3491 —2" (50 mm)diameter stainless steelexhaust vent with adjustableair control

♦ Recorder output—type Kthermocouple with sub-miniature connector on back ofoven

OV

EN

S

• Microprocessor-baseddigital temperature control

• Operating temperatures up to 260°C (500°F)

• Exterior constructionminimizes particlegeneration




24 x 24 x 15 49 x 35 x 48 5 7603860A 208 800

(61 x 61 x 38) (124 x 89 x 122) (142) (345)

24 x 36 x 27 49 x 47 x 60 13.5 11003861A 208 1000

(61 x 91 x 69) (124 x 119 x 152) (382) (490)

36 x 36 x 27 61 x 47 x 60 20.3 13703862A 208 1500

(91 x 91 x 69) (155 x 119 x 152) (575) (621)

36 x 36 x 39 61 x 47 x 72 29.3 16503863A 208 2000

(91 x 91 x 99) (155 x 119 x 183) (830) (748)

36 x 36 x 51 61 x 47 x 84 38.3 19403864A 208 3000

(91 x 91 x 130) (155 x 119 x 213) (1085) (880)

Some applications, such as those involving flammable solvents or hazardous locations, require additional safety devices.*Model A-2 is 230V; Model A-3 is 460V. For information about accessories and other voltage options, contact Lab-Line.

• 24 month warrantyClass 100 Cabinet Ovens

The Lab-Line Class 100 Cabinet Ovens are designed forapplications which require the elimination of particlecontamination, such as sterilization, depyrogenation,curing, and drying. These heavy-duty units provide aClass 100 interior atmosphere equally suitable forpharmaceutical or industrial use.

♦ Meets requirements of National Fire ProtectionAssociation Standard 86, Industrial Risk Insurers,Factory Mutual, and OSHA standards

♦ Solid-state heating element relay

♦ Adjustable, resettable over-temperature controllerprotects samples in the event of primary controlsystem failure

♦ HEPA recirculation filter is 99.7% efficient at 0.3micron particle size

♦ Direct-driven stainless steel recirculating blowerhas air flow safety switch

♦ Stainless steel interior construction

♦ Interior duct work removes easily for thoroughcleaning

♦ Positive-latching door has silicone rubber seal

♦ Oven interior has continuous back-welded seams (optional front-welded seams available)

♦ Aluminized steel exterior has white epoxy enamel finish (optional stainless steel finish available)

Model 3863A

OV

EN

S


Chamber ExteriorDimensions Dimensions Volume Net Wt. Ship. Wt.

Temperature W" x D" x H" W" x D" x H" cu. ft. lbs. lbs.Model Volts* Amps Watts Display (cm) (cm) (<) (kg) (kg)

HYDRAULIC THERMOSTAT CONTROL

3606 120 5.0 8 x 12 x 8 17 x 16 x 173/8 0.44 57 1103606-1 240 2.5 Dial

(20 x 30 x 20) (43 x 41 x 44) (12.5) (26) (50)

3608 120 5.0600

Thermometer

3608-1 240 2.5 10 x 12 x 10 197/8 x 16 x 161/4 0.7 83 1303608-5 120 5.0

LED(25 x 30 x 25) (50 x 40 x 41) (19.8) (38) (59)

3608-6 240 2.5

3618 120 13.3 Dial3618-1 240 6.7 Thermometer 14 x 20 x 14 25 x 25 x 22 2.3 150 2953618-5 120 13.3

1600

LED(36 x 51 x 36) (64 x 64 x 56) (65.1) (68) (134)

3618-6 240 6.7

PROGRAMMABLE MICROPROCESSOR TEMPERATURE CONTROL

3618P 120 13.3 14 x 20 x 14 25 x 25 x 22 2.3 120 3003618P-1 240 6.7

1600 LED (36 x 51 x 36) (64 x 64 x 56) (65.1) (54) (136)

*All models 50/60 Hz

Vacuum Ovens

♦ Radiant warm wall heating provides uniformity,preserves working chamber space

♦ Silicone door gasket and positive latch door maintainseal at all vacuum levels

♦ Exclusive polycarbonate safety shield protects doorglass

♦ Two removable aluminum shelves included standardwith all models

♦ 3" (76 mm) glass wool insulation prevents heat lossfrom working chamber

OPTIONAL VACUUM READOUTS—MODELS 3618P, 3618P-1

Model Description

DM Digital Units in Microns

DT Digital Units in Torr

Note: If ordering 3618P or 3618P-1 with a digital readout in microns, pleaseorder 3618PDM or 3618PDM-1

♦ Easy-to-clean stainless steel chamber interior

♦ Enamel-finished heavy gauge steel exteriorconstruction

♦ Models 3618P and 3618P-1 feature—Programmable microprocessor-based PIDtemperature control: run at a single setpoint or 24-step program of ramps and dwells

Digital temperature set and user-friendlycalibration

Independent, adjustable high limit backup hydraulicthermostat in case of primary control failure

Independent vacuum and purge needle valves

Optional factory-installed digital vacuum readout inmicrons or torr

♦ Models 3606–3618-6 feature hydraulic thermostattemperature control with built-in over-temperature protection

♦ Models 3606 and 3606-1 have top-mountedindependent evacuation and venting vacuum fittings;all other models feature front-mounted three-wayvalve for evacuation, venting, and purging of inertgases with vacuum fittings on front of unit

Model 3608

• Maximum temperature 220°C

• All controls conveniently located onside mounted panel

• Available in three sizes, two controlconfigurations, two display options



Max. Chamber Dimensions Exterior Dimensions Volume Net Wt. Ship Wt.Temp. Diameter x D (in) W" x D" x H" cu. ft. lbs. lbs.

Model Volts* Amps Watts (°C) (cm) (cm) (<) (kg) (kg)

3620 120 6.2

3620-1 240 3.1200

11 x 12 141⁄2 x 151⁄2 x 191⁄2 0.7 50 90

3620ST 120 6.2750

(28 x 30) (37 x 39 x 50) (19.8) (23) (41)

3520ST-1 240 3.1260


• Available in twotemperature ranges

• Stainless steel interiorconstruction

• Radiant warm wall heatingpermits greater chambercapacity


Duo-Vac ® Ovens

♦ Hydraulic thermostat provides primary temperature control

♦ Adjustable safety thermostat backup for sample protection

♦ Two solid aluminum shelves—11"D × 10 3⁄ 4"W (279 mm × 273 mm) and11"D × 8 1⁄ 2"W (279 mm × 216 mm)—included standard

♦ Stainless steel cylindrical chamber

♦ Tempered glass door for convenient viewing of chamber contents

♦ Dial thermometer in chamber displays actual temperature

♦ Positive locking door latch for tight seal at any vacuum level

♦ 3" (76 mm) fiberglass insulation minimizes heat loss from working chamber

♦ Sturdy cold-rolled steel exterior with baked enamel finish

♦ Vacuum control and relief valves and line fittings located on top of unit

Model 3620ST

OV

EN

S

• PID microprocessor temperaturecontroller provides ±0.75°C accuracy

• Specially designed radiant warmwall heating system delivers ±1.75°Cuniformity

• Temperature range from slightlyabove ambient to 150°C


Moisture Determination Ovens

♦ Digital temperature set for improved reproducibility

♦ Convenient LED temperature display of set point andactual temperature

♦ Adjustable backup thermostat protects samples incase of primary system failure

♦ Proportional control provides rapid temperaturerecovery with minimal overshoot

♦ Standard thermocouple under center chamber shelfmonitors actual chamber temperature

♦ Digital thermometer can be connected to oven viaType K thermocouple junction

♦ Front-mounted three-way flow pump control valve,vacuum control valve, and air inlet valves

♦ Vacuum gauge monitors chamber vacuum levels to30" Hg

♦ Corrosion-resistant stainless steel chamberconstruction

♦ Durable heavy gauge steel cabinet with attractivebaked enamel finish

♦ Solid, insulated door with silicone chamber gasketminimizes heat loss


Chamber Dimensions Exterior Dimensions Volume Net Wt. Ship. Wt.W" x D" x H" W" x D" x H" cu. ft. lbs. lbs.

Model Volt* Amps Watts (cm) (cm) (<) (kg) (kg)

3623 120 5.0 12 x 131⁄2 x 12 20 x 18 x 27 1.1 160 2303623-1 240 2.5

600 (30 x 34 x 30) (51 x 46 x 69) (31.1) (73) (104)

3624 120 5.0 12 x 20 x 12 20 x 26 x 27 1.7 200 2703624-1 240 2.5

600 (30 x 51 x 30) (51 x 66 x 69) (48.1) (91) (122)


OPTIONAL TYPE K THERMOCOUPLES

Model Suffix Description

A Flexible

B Rigid (Upper Shelf)

C Rigid (Lower Shelf)

When ordering, oven model number should precede thermocouplemodel—e.g., 3623A

Model 3624-1

OV

EN

S

♦ Three removable perforated aluminum shelvesincluded standard

Available options:

OV

EN

S




3625 120 10.0 12 x 131⁄2 x 12 20 x 18 x 27 1.1 150 2003625-1 240 5.0

1200 (30 x 34 x 30) (51 x 46 x 69) (31.1) (68) (91)

3628 120 12.0 12 x 20 x 12 20 x 26 x 27 1.7 210 2703628-1 240 6.0

1400 (30 x 51 x 30) (51 x 66 x 69) (48.1) (95) (122)


• Maximum temperature 300°C

• Convenient top-mountedcontrol panel puts allcontrols at eye level

• Uniform radiant warm wallheating saves chamberworking space


Hi-Temp “Squaroid” Vacuum Ovens

♦ Hydraulic thermostat temperature control

♦ Adjustable safety thermostat for over-temperatureprotection

♦ Individual pilot lights show which thermostat iscontrolling temperature

♦ Heaters mounted outside of chamber to conserveworking space and eliminate the hazards of open wireheaters

♦ Tempered glass window in door allows viewing ofsamples

♦ Dial thermometer in working chamber displaysactual temperature

♦ Precise vacuum control to 30" Hg displayed on analog

gauge

♦ All internal vacuum lines are stainless steel

♦ Compression fittings on rear wall of oven accept 1 ⁄ 4"(6 mm) O.D. hard tubing for pump and air

♦ Vacuum control and relief valves conveniently locatedon front of unit

♦ Corrosion-resistant stainless steel interior

♦ Sturdy enamel-finished heavy gauge steel exterior

♦ 3" (76 mm) glass wool insulation minimizes heatloss from chamber

♦ Secure door latch and continuous gaskets on vacuumchamber provide a tight seal

Model 3625

OV

EN

S

ACCESSORIES

Model No./Suffix* Description

A Thru-Wall Port (factory installed)

B10" (254 mm) DiameterTemperature Chart Recorder(factory installed) (240V/60 Hz)

C 24 Hour Timer (factory installed)(240V/60 Hz)

D Forced Draft Exhaust (factoryinstalled; additional 100 Watts)

23805-6 Shelf for 23805

23807-8 Shelf for Model 23807

*A Model 23805 with a Chart Recorder and Timer wouldbe ordered as 23805BC


Chamber Dimensions Exterior Dimensions** Volume Net Wt. Ship Wt.W" x D" x H" W" x D" x H" cu. ft. lbs. lbs.


30 x 20 x 72 36 x 26 x 87 25 505 71523805 240 12.5 3000 (76 x 51 x 183) (91 x 66 x 221) (708.0) (229) (324)

36 x 24 x 72 42 x 31 x 87 36 530 92023807 240 12.5 3000 (91 x 61 x 183) (107 x 79 x 221) (1019.5) (240) (417)

**All models are 50/60 Hz. 208V units available upon request.**Forced air exhaust extends beyond given dimensions. Call LAB-LINE for details.

• Maximum operating temperature180°C

• Spacious working chamber easilyhandles large batches of glassware


Sterilizer/Dryers

The Lab-Line Sterilizer/Dryers are designed forconvenient drying of glassware and other laboratoryapparatus as well as dry heat sterilization.

♦ Dual independent hydraulic thermostat system fordependable control plus over-temperature protection

♦ Moisture-proof stainless steel heating elements

♦ Door-mounted dial thermometer provides accuratetemperature display

♦ Double-wall construction

♦ Corrosion-resistant stainless steel chamber interior

♦ 3" (76 mm) of high-density, non-hygroscopicinsulation retains heat in working chamber

♦ Durable cold-rolled steel exterior has baked enamelcoating

♦ Heavy duty chrome-plated door latches and siliconegasket form positive seal

♦ Recessed control panel protected by spill-proofplexiglass cover

♦ Five adjustable perforated stainless steel shelves areincluded with unit, provide up to 30 sq. ft. (2.8 sq.m) of usable space

♦ Intake port and 4" (102 mm) exhaust vent withadjustable damper provide efficient air exchange

♦ When chart recorder or timer are ordered asaccessories, units are provided as 240 volts, 60 Hz

Model 23805

OV

EN

S


Chamber Dimensions Exterior Dimensions** Volume Ship Wt.W" x D" x H" W" x D" x H" cu. ft. lbs.


26 x 26 x 38 34 x 51 x 64 14.9 12003830A 208 660 (66 x 66 x 97) (86 x 130 x 163) (422) (544)

26 x 38 x 50 34 x 63 x 76 28.6 17003840A 208 900 (66 x 97 x 127) (86 x 160 x 193) (809) (771)

Some applications, such as those involving flammable solvents or hazardous locations, require additional safety devices.**Model A-2 is 230V; Model A-3 is 460V. For information about accessories and other voltage options, contact Lab-Line.**Forced air exhaust extends beyond given dimensions. Call Lab-Line for details.

• Available in two chamber sizes, and gas or electric configurations

• Microprocessor-based digitaltemperature controller on electric units

• Electronic flame safeguard protectionon gas units


Vertical Air Flow Cabinet Ovens

The Lab-Line Vertical Air Flow Cabinet Ovens arespecifically designed for applications which requireheated air to pass both around the outside and throughthe middle of parts such as open-ended cylinders, orwhere the least restriction to free air passage is in thevertical direction.


♦ Patented adjustable louvers on supply and returnduct work

♦ Built-in baffles prevent radiant heating

♦ Temperature control from slightly above ambient to260°C (500°F)

♦ Stainless steel interior

♦ Enamel-finished aluminized steel exterior with allwelded construction

♦ Heavy-duty door and door frame with explosion-venting latches

♦ High pressure recirculating blower with adjustablefresh air intake and exhaust dampers

♦ Two nickel-plated wire shelves included standard: Model 3830A holds up to 12 shelves; Model 3840Aholds up to 16 shelves

Model 3840A

OV

EN

S




20 x 20 x 20 36 x 32 x 54 4.6 6803801A 208 600 (51 x 51 x 51) (91 x 81 x 137) (130) (308)

38 x 20 x 26 54 x 32 x 60 11.4 12003810A 208 660 (97 x 51 x 66) (137 x 81 x 152) (323) (544)

38 x 26 x 38 54 x 38 x 72 21.7 13703820A 208 900 (97 x 66 x 97) (137 x 97 x 183) (614) (621)

38 x 38 x 38 54 x 50 x 72 31.8 15203880A 208 1200 (97 x 97 x 97) (137 x 127 x 183) (900) (689)

50 x 50 x 50 70 x 62 x 86 72.3 31003870A 208 3000 (127 x 127 x 127) (178 x 157 x 218) (2047) (1406)


protects samples in the event of primary controlsystem failure

♦ Patented adjustable louvers on supply and returnduct work

♦ Built-in baffles prevent radiant heating

♦ Aluminized steel exterior with durable enamel finish

♦ Heavy duty doors and door frame feature explosion-venting latches

♦ Channel-style shelf supports prevent tipping

♦ Two nickel-plated wire shelves included standard;Model 3801A holds up to 6 shelves, Models 3810Aand 3870A hold up to 8 shelves, Models 3820A and

Model 3870A

• Available in five chamber sizes, and gas or electricconfigurations

• Microprocessor-based digitaltemperature controller onelectric units

• Electronic flame safeguardprotection on gas units

Horizontal Air Flow Cabinet Ovens

The Lab-Line Horizontal Air Flow Cabinet Ovensprovide full horizontal air flow for shelf processing attemperatures up to 454°C (850°F). They are designedfor use in applications where work is shelf-loaded andthe least restriction to free air passage is in thehorizontal direction.



♦ Adjustable, resettable over-temperature controller

OV

EN

S




24 x 24 x 24 38 x 48 x 341⁄2 8 9503850A 208 900 (61 x 61 x 61) (97 x 122 x 88) (227) (431)

24 x 36 x 24 38 x 60 x 341⁄2 12 11703852A 208 1200 (61 x 91 x 61) (97 x 152 x 88) (340) (531)

36 x 36 x 36 50 x 58 x 461⁄2 27 15003854A 208 900 (91 x 91 x 91) (127 x 147 x 118) (765) (680)

36 x 48 x 36 50 x 70 x 461⁄2 36 19503856A 208 1200 (91 x 122 x 91) (127 x 178 x 118) (1019) (885)


Inert Atmosphere Ovens

Lab-Line’s Inert Atmosphere Ovens are designed for usewith non-flammable inert gases such as nitrogen,argon, or carbon dioxide to protect parts from oxidationduring heating.



♦ All interior seams are welded gas-tight

♦ All wall penetrations are welded on inside, fitted withcompression fittings on outside of oven

Model 3856A

♦ Inner oven walls are extended to seal directly againstsilicone rubber door seal

♦ Adjustable offset door hinges to ensure tight closure

♦ Air jacket on inner oven for cooling

♦ Stainless steel interior; enameled aluminized steelexterior

• Microprocessor-based digitaltemperature controller

• Available in four chamber sizesand two temperature options

• Front-to-back horizontal air flowcompletely surrounds work


OV

EN

S

MATERIALS AND DRYING TIMES

MinutesDrying In

Material Water Wt. Temp. Drying

Sawdust 21% 100g 25°C 21

Asbestos 58.5% 500g 120°C 30

Tea 33.3% 100g 60°C 18

Sephadex® (molecular sieve) 75% 500g 55°C 15

Dyestuff 5 micron particle size 95% 1Kg 100°C 40

CuSO45H2O to CuSO4H2O 211g 110°C 18

Chenodeoxy-Cholic Acid 80% 200g 40°C 55

Germinated Barley 38% 780g 80°C 70

Sand 22% 1Kg 100°C 7

Diakon® Acrylic Polymer 10% 500g 90°C 10

Hydrophilic Polymer 86% IPA 311g 34°C 13

Granular Polymer 75% H2O 542g 40°C 3

Hydrophilic Polymer 78% 218g 60°C 11

• Fast, economical drying of hundreds ofcompounds

• Same principle as industrial-sizeddryers, in a size perfect for laboratoryuse or scale-up studies

• Dries powders, crystals, granules, orpaste

♦ Material to be dried is placed in a drying tub fitted with a filter bag

♦ Ambient air drawn through stainless steel filter passes over heater bank, is warmed and filtered twice

♦ Warm air fluidizes the moist material, exposing greater surface area

♦ Result is faster drying at lower temperatures than withtraditional drying ovens

PERFORMANCE SUITABILITY CHART

Material Max. Dry Max. Wet ChemicalComposition Temp. °C Temp. °C Tolerance

Terylene 150 Approx. 80 Good arid vapors

Nylon 115 115 Good alkali vapors

Polypropylene 100 100 All

Nomex 240 240 Good alkali

Fluorocarbon 240 240 All

Model 23852

Model 23856

Model 23866

Model 23854Model 23860

OV

EN

S

• Maximum operating temperature150°C

• Temperature control ±1°C

• Maximum air flow 2.4 cu. m per min.


♦ Solid state blower speed control

♦ Electrical safety interlock prohibits heater operation when blower is off

♦ Built-in 6 hour timer with alarm

♦ Manual or automatic operation

♦ Drying tubs available in stainless steel or glass

♦ Four types of filter bags available for use withdifferent materials, solvents, and temperatures—seetable below to choose the best filter bag for each application

FILTER BAG MATERIAL CHARACTERISTICS

Material Dacron Nylon Polypropylene Nomex

Filter Part 23859 for 2 & 5 L Tubs 23860 for 2 & 5 Liter Tubs 23861 for 2 & 5 Liter Tubs 23871 for 2 & 5 Liter TubsNumbers 23862 for Multi-Tub 23863 for Multi-Tub 23864 for Multi-Tub 23872 for Multi Tub

Acid Resistance Excellent Poor Excellent Poor

Alkali Resistance Fair Excellent Excellent Good

Dry Heat (Max.) Excellent (150°C) Good (125°C) Good (125°C) Good (200°C)

Wet Heat (Max.) Good (125°C) Good (125°C) Poor (100°C) Good (200°C)

Abrasion Good Excellent Good Good/Excellent

ACCESSORIES

Model Description

23853 2 Liter Stainless Steel Tub

23854 2 Liter Glass Tub

23856 5 Liter Stainless Steel Tub

23857 5 Liter Glass Tub

23858 Stainless Steel Multi-Tub

23859 Dacron Filter Bag—For 2 and 5 Liter Tubs

23860 Nylon Filter Bag—For 2 and 5 Liter Tubs

23861 Polypropylene Filter Bag—For 2 and 5 Liter Tubs

23862 Dacron Filter Bag for Multi-Tub

23863 Nylon Filter Bag for Multi-Tub

23864 Polypropylene Filter Bag for Multi-Tub

23865 Stainless Steel Support Filter (60 Mesh)

23866 Stainless Steel Support Filter (250 Mesh)

23867 Nylon Support Filter (250 Mesh)

23871 Nomex Bag—For 2 and 5 Liter Tub

23872 Nomex Bag—For Multi-Tub


Dimensions Net Wt. Ship Wt.W" x D" x H" lbs. lbs.

Model* Volts Hz Amps Watts (cm) (kg) (kg)

23852 120 60 20 18 x 121⁄2 x 10 25 54

23852-1 240 50** 102400

(46 x 32 x 25) (11) (24)

**Does not include filter bag or drying tub.**60 Hz available by special request

PERFORMANCE SUITABILITY CHART

Material Max. Dry Max. Wet ChemicalComposition Temp. °C Temp. °C Tolerance

Terylene 150 Approx. 80 Good arid vapors

Nylon 115 115 Good alkali vapors

Polypropylene 100 100 All

Nomex 240 240 Good alkali

Fluorocarbon 240 240 All

Documents

Duo-Vac Oven Ultra Clean Oven - Cole-Parmer · • Ultra Clean® ovens, with or without HEPA filters—meet the strict requirements of semiconductor, electronic component, and clean