1
DUCATI MULTISTRADA 1200 ‘17 KIT TOP D0ML17ST DESIGNED IN BARCELONA Do not fully tighten the screws until it is ensured that the KIT is correctly attached and aligned. No apretar los tornillos del todo hasta asegurarse que el KIT está correctamente colocado y alineado. Ziehen Sie die Schrauben nicht ganz fest, bevor Sie sich nicht vergewissert haben, daß der Bausatz korrekt eingestellt und ausgerichtet ist. Non stringere del tutto le viti fin tanto non si è sicuri che il kit è collocato correttamente e allineato. Ne pas serrer les vis avant d’être sûr que le KIT est correctement monté et ajusté. WARNING!

DUCATI MULTISTRADA 1200 ‘17 - Cases and … MULTISTRADA 1200 ‘17 KIT TOP D0ML17ST DESIGNED IN BARCELONA Do not fully tighten the screws until it is ensured that the KIT is correctly

  • Upload
    buibao

  • View
    227

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DUCATI MULTISTRADA 1200 ‘17 - Cases and … MULTISTRADA 1200 ‘17 KIT TOP D0ML17ST DESIGNED IN BARCELONA Do not fully tighten the screws until it is ensured that the KIT is correctly

DUCATI MULTISTRADA 1200 ‘17KIT TOP D0ML17ST

DESIGNED INBARCELONA

Do not fully tightenthe screws until it isensured that the KITis correctly attachedand aligned.

No apretar los tornillosdel todo hasta asegurarseque el KIT estácorrectamente colocado yalineado.

Ziehen Sie die Schrauben nichtganz fest, bevor Sie sich nichtvergewissert haben, daß derBausatz korrekt eingestellt undausgerichtet ist.

Non stringere del tuttole viti fin tanto non si èsicuri che il kit ècollocato correttamentee allineato.

Ne pas serrer les visavant d’être sûr quele KIT estcorrectement montéet ajusté.

WARNING!