Upload
vuongthu
View
229
Download
0
Embed Size (px)
Citation preview
DS-S-EN(HM)
Simple and user friendly sliding door operatorfor everybody
Sliding door operator
1. Excellent durability and compact design is realized by hypoid gear with brushless motor.
2. Ease of installation is realized by simple wiring and reduced number of components.
3. Three operator models are available depending on door weight.
4. Suitable for diverse applications, such as hospitals, airports, malls, offices, etc.
Features
Sliding door operatorDS-S-EN(HM) Simple and user friendly slidingdoor operator for everybody
Five selectable operation modes
Improved visibility with a color LCD screen
Multiple languages adaptability for operation mode
Easy identification of malfunctioning parts and operation history
Auto NightOne Way ManualHold Open
DimensionSpecification(common spec)
User-friendly Advanced Program Switch
Optional Devices
Two models: EL-03U (Unlock at power off) / EL-03L (Lock at power off)
Easy locking by end-user, simply select "One Way" or "Night" mode
Advanced usability with "APS-N20" program switch
Electric Lock
Applicable Door Mass×Door Qty (kg)
Applicable Door Area DW×DH (m2)
Applicable Door Width DW (mm)
Ratio of Door Height / Width (DW/DH)
Operator Box Height×Width H×W (mm)
Power Supply
Power Consumption (W)
Opening Speed (cm/s)
Closing Speed (cm/s)
Hold Open Time (s)
Maximum Endurance Wind Speed (m/s)
75
2.2
60×2
1.8
Single Bi parting
DS-60
100
2.8
85×2
2.6
Single Bi parting
DS-75
650~1250
4.0
100×150
230VAC+6/-10% 50/60Hz
10~70
10~70
0~50
15
120
3.3
120×2
3.0
Single Bi parting
DS-150
Max. 170 [W] Max. 270 [W] Max. 270 [W]
Door Operator Type
Specification
CAN BUS (NET System)
Signal Output
12V Output for External Accessory
Door Status Output
Output of Error with Description
Interlocking System
Output for Electric Lock
Manual Lock Release Mechanism
Connection for Safety Sensors
(two)
(700mA)
Adjustment of Door Open/CloseControl via Advanced Program Switchwith Full Color Display
(mm)
Accessibility Innovations Company
http://nabco.nabtesco.com/en/
For further details, contact:
All specifications herein are subject to change without noticeCAT.No. D660 0201 1408 02SE
Address : JA Kyosai Bldg., 7-9,Hirakawacho 2-chome,Chiyoda-ku, Tokyo,102-0093, Japan
Phone : +81(0)3-5213-1157Fax : +81(0)3-5213-1173
ISO9001 / ISO14001 Certified
505Dt=405
82 2530
18
150
9~
14D
HH
100
User-friendly advanced program switch forautomatic sliding door
1. Color LCD offers excellent visibility for switching the automatic door mode and changing the parameter set values.
2. Two types of access codes are programmable to provide different levels of pass to different users.
3. Installer can check information related to malfunctioning parts and operation history, which makes maintenance and troubleshooting easier.
Features
APS-N20Program Switch
Program Switch User-friendly advanced program switch forautomatic sliding doorAPS-N20
Dimension
Accessibility Innovations Company
http://nabco.nabtesco.com/en/All specifications herein are subject to change without notice
Address : JA Kyosai Bldg., 7-9,Hirakawacho 2-chome,Chiyoda-ku, Tokyo,102-0093, Japan
Phone : +81(0)3-5213-1157Fax : +81(0)3-5213-1173
Operation Mode
Parameter Change
These functions allow the installer to check information such as malfunctioning parts in case of error and operation history such as opening and closing cycles.
Error and Operation History
35
28
88
88 16.5
(mm)
ISO9001 / ISO14001 Certified
Several modes of automatic door operation can be selected by the end-users; Auto, Night, One Way, and etc. Furthermore, the position of the door opening can be configured at two levels: Full Open and Partial Open.
This function allows the installer to change parameters such as Door Opening/Closing Speed and Hold Open Time.
For further details, contact:
CAT.No. D661 0201 1408 02SE
1. Active infrared transom mount sensor for automatic sliding door combines both safety and activation.
2. Sensor covers are available in three colors: silver, white, and black.
3. The large detection area provides fast detection for any traffic including trolleys approaching from any angle.
4. Easy adjustment: Installation time can be reduced to a minimum by using easily set switch.
Features
Active Infrared activation and safety with test input forautomatic sliding doors
OA-220CN TTransom mount sensor
DimensionSpecification
Specification
Transom mount sensorOA-220CN T
ABCDEFGHI
2.200.140.420.821.351.901.332.052.78
2.500.160.480.931.542.171.512.323.15
2.700.180.521.001.662.341.632.513.40
3.000.200.581.101.852.601.812.793.79
[m]Detection area size (reference value)
1st row
2nd row3rd row
4th row
5th row
A
BC
DE
F
GG
HI
Motion / Presencedetection
Motion detection
※The actual detection area may differ according to the size/material/entry speed of the object and the installation environment.
Active Infrared Reflection
Motion / Presence
Max. 3.0m
less than 2.5W(mm)
Detection Method
Detection Object
Mounting Height
Detection Area
Current Consumption
W 2.78m×D 1.9m(at mounting height 2.2m)
: Emitting spots
: Detection area
: Emitting spots (Can be eliminated)
Accessibility Innovations Company
http://nabco.nabtesco.com/en/
For further details, contact:
All specifications herein are subject to change without noticeCAT.No. D662 0201 1408 02SE
Address : JA Kyosai Bldg., 7-9,Hirakawacho 2-chome,Chiyoda-ku, Tokyo,102-0093, Japan
Phone : +81(0)3-5213-1157Fax : +81(0)3-5213-1173
ISO9001 / ISO14001 Certified
Active Infrared activation and safety withtest input for automatic sliding doors
12536 43
12
267
617.
5 45