DRYWALL SCREWS

PHILLIPS BUGLE HEAD LAMINATING DRYWALL SCREW

For temporary fastening of gypsum board to gypsum in laminated drywall constructionUses No. 2 phillips bitGenerally not heat treatedLength 1 ½"

LAMINATORS®

PHILLIPS BUGLE HEAD COARSE THREAD DRYWALL SCREW

Standard drywall screws for attaching gypsum board to wood studs Maintains superior holding power and ease of penetrationUses No. 2 phillips bitLengths 1" to 6"

HIGH-TOPPERS®

PHILLIPS BUGLE HEAD, SHARP POINT, FINE THREAD DRYWALL SCREWS

Standard drywall screws for attaching gypsum board to 20-25ga. commercial quality metal or wood studsUses No. 2 phillips bitPoint designed for fast penetrationKnown in the “Trades” as the “Multi Purpose Screw”Lengths 1" to 6"

TOPPERS®

PHILLIPS BUGLE HEAD, SHARP POINT, ALTERNATING HIGH/LOW THREAD DRYWALL SCREW

Standard drywall screws for attaching gypsum board to 20-25 ga. commercial quality metal or wood studsUses No. 2 phillips bitMultiple applications, has varied usesLengths 1-1/4" to 3”

DUAL THREAD

869 South Rohlwing Rd, Unit G Addison, IL 60101

TEL 630-766-1273 FAX 630-766-1275

1-800-262-9680

DRYWALL SCREWS

SELF-DRILLING DRYWALL SCREWS

PHILLIPS BUGLE HEAD SELF-DRILLING DRYWALL SCREW

Attaches gypsum board, insulated board and other low density material to 14-20 ga. metalUses No. 2 phillips bitLengths 1" to 3"

DRILLERS®

SELF-DRILLING PHILLIPS PAN HEAD FRAMERS

Attaches 14-20 ga. metal members

Uses No. 2 phillips bitLengths 7/16"

FRAMING DRILLERS®

SELF-DRILLING PHILLIPS PAN HEAD ZINC PLATED FRAMERS

Attaches 14-20 ga. metal. members

Maintains a commercial zinc coating offering low corrosion protection NO CORROSION WARRANTYUses No. 2 phillips bitLengths 7/16"

FRAMING Z-DRILLERS®

PHILLIPS BUGLE HEAD SELF-DRILLING ZINC PLATED DRYWALL SCREW

Attaches gypsum board, insulated board and other low density material to 14-20 ga. metalMaintains a commercial zinc coating offering low corrosion protection NO CORROSION WARRANTYUses No. 2 phillips bitLengths 1" to 3"

Z-DRILLERS®

MODIFIED TRUSS-WAFER HEAD, PHILLIPS DRIVE SHARP POINT, FINE THREAD K-LATH SCREW

Attaches metal lath to 20-25 ga. commercial quality metal studsSubstitutes as framing screwLengths 9/16" to 3"

WAFER HEAD®

SHARP POINT, FINE THREAD PHILLIPS PAN HEAD FRAMER

Attaches 20-25 ga. commercial quality metal membersLength 7/16"

FRAMERS®

SHARP POINT, SQUARE DRIVE FINISHING SCREW

Attaches base or trim over single or double layer of gypsum board to 20-25 ga. metal or wood studsUses No. 1 square bit Lengths 1-5/8", 2-1/4”, 3"

TRIM HEAD®

TOLL FREE1-800-262-9680

SELF-DRILLING ZINC K-LATH SCREWS

Attaches metal lath to 14-20 ga. steel studs Substitutes as a framing screw

Maintains a commercial zinc coating offering low corrosion protection NO CORROSION WARRANTY Uses No. 2 phillips bit

Lengths 9/16” to 3”

WAFER HEAD DRILLERS®

SELF-DRILLING SQUARE DRIVE DRYWALL SCREW

Uses No. 1 square drive bitLengths 1-5/8", 2-1/4", 3"

TRIM HEAD DRILLERS®

TOLL FREE1-800-262-9680

Flex Lite is light weight, easy to use and great for building curved walls, ceilings and soffits. Use it where lateral loads are not an issue and where the higher quality of Flex-C Trac is not needed.

Flex-C Lite

The 3-Legged Dog™ deflection clip eliminates fumbling or drop-ping clips.

3-Legged dog

First, Slide the 3-Legged Dog onto the end of the stud

Second,

and snap into place

Third,

conventional fasteners

Light Gauge framing for use in joint systems. See UL Fire Resistance Directory

(Control No. 6CA8, File No. R20831)

Flex-C Trac *with new Hammer-LockTM feature is designed to make life easier for the builder needing to construct curved walls, barrel vaults and more.

Flex-C Trac w/ Hammer-Lock

" " "

", 8", 10"

", 4", 6", 8", 10"

", 3 5/8" "

This sturdy, well-built product can be easily shaped by hand and installed in a fraction of the time required for traditional methods. It is also well suited for framing curved soffits and light coves as well as acoustical clouds.

Flex-C Arch

" and 6"

" and 4"

' and 8'

Using the Flex-C Trac system technology, the Flex-C Header is pre-assembled, easy to install and load bearing.

Flex-C Header

“Positive Placement” type nailers

" and 6"

Caution: Always use proper eye protection and safety measures when using power tools and air nailers.

Flex-C Angle *with Hammer-Lock™ feature is ideal for use in the construction of deep curved soffits and furr downs or other applications where the second leg of the track would interfere with perpendicular framing components.

Flex-C Anglew/ Hammer-Lock

shape of the angle.

" "

"

TOLL FREE1-800-262-9680

TOLL FREE1-800-262-9680

SCAFFOLD MOVING DEVICE

Crawler 4Piece Package

' or 6' length Item #SP-104-4P 4'

Item #SP-106-4P 6'

Item #SP-204-4P 4'

Item #SP-206-4P 6'

TOLL FREE1-800-262-9680

patent pending truss system

Item # S-204 - 4' 200 Series

Item # S-206 - 6' 200 Series

Item # S-104 - 4' 100 Series

Item # S-104 - 4' 100 Series

Crawler Scaffold

' length

"

either the 100 or 200 Series Scaffold

Item # SP-206-GRP 200 Series

Item # SP-106-GRP 100 Series

Crawler GuardRail Package

soon as the throttle

is released

"

Telescopes to 118" allowing comfortable operation at 7'

platform height

C3 TRAK-IT FUEL CELL

C4 TRAK-IT FUEL CELL

STANDARD PINS (SMOOTH SHANK WITH ROLLED POINT)Designed for use in Concrete and Masonry. All pins are zinc

plated for a minimum level of corrosion resistance.

55022 3/4"

55024 1"

55026 1 1/4"

55028 1 1/2"

TRACK-IT C4 PINS AND WASHEREach box of pins comes packaged with one fuel cell. The 2 9/16"

Sill Plate Pins also come packaged with STICK-E Washers.

55130 3/4" Pin 800 4000

55132 1" Pin 800 4000

55134 1 1/4"

55136 1 1/2"

55145 2 9/16" Sill Plate Pin 800 4000

Fuel Cells are designed to be used with the

-

Ten fasteners are collated on each patented,

plastic top hat-style strip. Use for light duty static ap-

with its unique right angle metering valve, contains enough gas

fasteners and 1 fuel cell.

Trak-It® C3Drywall Track to Steel and Concrete

Trak-It® C4

Everything-In-Between Nailer

This powerful, lightweight tool is the

line of gas powered tools. The only gas

plates to concrete foundation and

footing no problem.

Washer

TOLL FREE1-800-262-9680

ACOUSTICAL EYE LAG SHARP FLUTE, SELF-DRILLING ZINC PLATED FASTENERLAG SCREW

ZINC ACOUSTICAL TOGGLE

Designed for hanging acoustical ceilingsLarge washer assures that toggle will not pull through drywall

ACOUSTICAL TOGGLE

ACOUSTICAL EYE LAG SHARP POINT SELF-TAPPING PLAIN LAG SCREW

Attaches drop ceiling tie wires to wood base material

LAG SCREW

ACOUSTICAL THREADED T

IE-W

IRE

AC

OU

ST

ICA

L T

OG

GLE

TIE

-WIR

E W

ED

GE

AN

CH

OR

TIE

-WIR

E H

AM

ME

R A

NC

HO

RLA

DD

CE

ILIN

G C

LIP

AS

SE

MB

LY

CE

ILIN

G C

LIP

ON

LYS

TA

ND

AR

D C

EIL

ING

CLIP

PO

WE

R P

IN C

EIL

ING

CLIP

PRE-WRAPPEDAll pre-wraps are available in 4’, 6’, 8’, 10’ and

TOLL FREE1-800-262-9680