Upload
lycong
View
233
Download
1
Embed Size (px)
Citation preview
Dry Ice Blasting Technologies
www.meccrios.com
CATALOGUE
METODOLOGIEECOLOGICHECRIOGENICHE
www.meccrios.com
METODOLOGIEECOLOGICHECRIOGENICHE
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 1
M.E.C. Srl
Viale Italia, 19 – 28010 Caltignaga (NO) Italia Tel. +39 0321 653800 Fax. + 39 0321653007
e-mail: [email protected]
Web: www.meccrios.com – www.ghiacciosecco.net
The M.E.C. srl, was founded in 1991. The company is based in Caltignaga (NO) Italy at 30km from Milan Malpensa Airport, The M.E.C. Company produces dry ice blasting machines and equipments for technical cleaning (with the dry ice blasting system) of machines for industrial production and equipments. We are the first Dry Ice Blasting machines manufactures in Italy and all our range of products are Made in Italy. M.E.C. Company produces also some prototypes for using at very low temperatures. Furthermore we are able to give a lot of different services, in order to always find the best solution at any customers' problem.
TTHHEE CCOOMMPPAANNYY
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 2
TTHHEE DDRRYY IICCEE BBLLAASSTTIINNGG TTEECCHHNNOOLLOOGGYY How it works
The dry ice blasting uses small pellets of dry ice sprayed through a jet nozzle with compressed air to remove paints, oil, grease, dirt, ink, adhesives and other materials you want to remove. The frigid temperature of the dry ice against the dirty surface causes adhesion to shrink and loosen from the surface. On immediate impact, the dry ice evaporates into environmentally safe and innocuous CO2 gas.
The kinetic energy ( E = ½ mv2)
The energy associated to the mass and to the speed is transferred to the surface to be cleaned / coating removal. This is the fundamental way to work either with this dry ice method or with sand / water etc. Thermal differential
When the dry ice pellets cold touch the surface, a small thermic difference occurs between the coating material, the contaminant and the substrate. This provokes cracks and the detaching facilitating the removal process.
Micro – Explosion
When the dry ice touches the surface and it transforms into innocuous CO2 gas, this tends to invade the cracks and the pores penetrating into the coating / contaminant. Then it warms up and it expands rapidly and it makes the coating / contaminant detaching from the substrate, favouring still further the coating removal or the cleaning process. Sublimation
With an inferior pressure at 5.2 bar, the solid CO2
transforms directly in gaseous state without turning into the Liquid state. But if the blasting pressure is superior at 5.2 bar ( 5.2 x 14.7 = 76.44 psi ), the CO2 in the sublimation state will show some characteristics of the Liquid CO2 while the same reaches its "triple point". Has been proved that the Liquid CO2 is a strong organic solvent so it is reasonable to suppose that this solvent action can be present when the blasting pressure is superior at 5.2 bar.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 3
DDRRYY IICCEE
What is dry ice? The blasting agent which consists of dry ice is the solid form of CO2 ( carbon dioxide) at a temperature of - 78.5°C. CO2 is a natural medium, which has an inherent thermal energy ready to be tapped. At atmospheric pressure, solid CO2 sublimates directly to vapour without a liquid phase. This unique property means that the dry ice blast medium simply disappears, leaving only the original contaminant to be disposed of. In addition, cleaning in water sensitive areas (e.g. in the proximity of electrical cabinets) is now possible. The grade of carbon dioxide used in blasting is the same as that used in the food and beverage industry and has been specifically approved by the FDA, the EPA and the USDA. The carbon dioxide is an odourless, non-toxic gas which is used in the drinks industry as an additive in beer and mineral water. It is also used in the food industry for cooling meat and sausage etc. Carbon dioxide is a non-poisonous, liquefied gas that is both inexpensive and easily stored at work sites. Of equal importance, it is nonconductive and non-flammable. CO2 is a natural by-product of several industrial manufacturing processes such as fermentation and petrochemical refining. The CO2 given off by the above production processes is captured and stored without losses until needed. When the CO2 is returned to the atmosphere during the blasting process, no new CO2 is produced. Instead, only the original CO2 by-product is released.
How is dry ice produced? A regular supply of Liquid Carbon dioxide from a storage tank is expanded at low pressure and form the dry ice snow (at a temperature of –78,.5°C ) which is then pressed through a die by a single acting horizontal piston producing dry ice pellets in different dimension. For the successful operation of the dry ice machine it is essential to use moisture – free Liquid CO2.
TANK CO2 L
M.E.C. PELLETTIZER
CRYOBOX
For the storage of dry ice
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 4
DDRRYY IICCEE BBLLAASSTTIINNGG CCLLEEAANNIINNGG
The advantages of dry ice cleaning
- Save costs – increase returns - No damage to the parts being cleaned - Avoidance of cleaning chemicals - Abrasion – free use - No solvents - Short cleaning times - Thorough cleaning - Reduction of downtimes - Simultaneous disinfections - Clean treatment - Environmentally friendly - Decreased down- time - Safe for all equipment - Sanitary and clean
It does not produce CO2 or add CO2 to the atmosphere and therefore does not contribute to the greenhouse effect!
Dry ice blasting is truly, and completely, environmentally friendly!
Cleaning method comparison
Pressure Blast Cleaning Technique
Waste for Disposal
Abrasive Health Hazard Electrically Conductive
Performance Comparison
Dry ice CO2 NO NO NO NO Excellent
Hot Water Yes No No Yes Poor
Steam No No No Yes Poor
Water / Solvent Yes No Yes Yes Limited
Aluminum Oxide Yes Yes Silicosis No Too aggressive
Metal Shot Yes Yes No No Too aggressive
Glass Beads Yes Yes Irrespirable dust No Too aggressive
Sodium Bicarbonate Yes Yes Irrespirable dust No Loss of patina
Pumice Yes Yes Silicosis No Good
Sponge Blast Yes Yes Silicosis No Loss of patina
Plastic Beads Yes Yes Irrespirable dust No Good
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 5
SSEECCTTOORRSS WWHHEERREE TTOO UUSSEE DDRRYY IICCEE BBLLAASSTTIINNGG
Aeronautic Delicate mechanical components cleaning for aeronautics
Automation Mounting machines, transfer, belt conveyors ( different types), carrier carts,
Automotive Moulds for car parabola headlights, cleaning of cars, motor, gears, combustion chambers. Cast iron and aluminium dies ( mono-block, heads, circles)
Chemistry Silos, containers, stocking reservoirs, chemical reactors,
Electric Electric transformers maintenance, inside electric board cleaning,
Environment Removing graffiti from walls, monuments conservative cleaning, removing “chewing-gum” from pavements, “dry-clean” of office chairs and armchairs, prefabricated industrial workshop inside cleaning,
Food Industry Food containers, stocking reservoirs, food belt conveyors, food moulds ( wafer, chocolates, cakes, etc.), metal strips for ovens ( biscuits, crackers), food packaging machine ( coffee, sauce, etc.), PET bottle moulds cleaning
Foundry Foundry “ shells” cleaning, foundry “core box” cleaning,
Hi - tech Cabin for anti-wearing layer application, gold-plating removing of quartz bell for epitaxial machines
Household article Moulds and lines for expanded insulator injection ( refrigerators)
Internal transport “dry-clean” of elevator carts
Maintenance Paint removing of signs and irremovable parts
Mechanic Tool machines, working centres, big fans
Motorcycle Moulds for fibreglass articles production ( safety helmet)
Naval Ship kitchen ventilation pipes cleaning
Marine Removing anti-vegetative paint from boats
Painting Airplane transporters, conveyors, liquid painting cabin, inside oven of plaint polymerisation, phosphorous- degreasing tunnel, manufactures paint-removing,
Petrol chemistry Decontamination of titanium coated reactors
Plastic Plastic extruder screws and filters , moulds for plastic articles,
Printing Printing press ( rotogravure and flexography), rollers for printing off set,
Railway Inside railway carriage cleaning, maintenance of train electrical driving system,
Rubber Tire moulds, moulds for robber articles production ( gaskets, sleeves, belts, silent block)
Transportation “dry-clean” of inside trucks and motor vehicles, containers cleaning
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 6
Material Surface Equipment Adhesives Glass, metals, painted surfaces, plastics Applicators, coating machines, labelling machines
Animal feed Metals, plastics, rubbers Bagging machines, extruders
Asbestos Brick, concrete, metals, piping Boilers, buildings, heaters Biscuit Conveyors, moulds Baking ovens
Bitumen Concrete, glass, metals, plastics Construction equipment Boiler scale Boiler internal Manifolds, valves
Bread Baking tins, conveyors Baking ovens Carbon deposits Commutators, electric and electronic
components, metals Electric motor windings, engine cylinder heads, generators, printed circuit boards (PCB’s)
Chewing gum Street paving Process and packaging equipment Chocolate Conveyors, moulds Process and coating equipment Combustion residues Boiler membrane walls, fire tubes, flues Burners, combustors, exhaust systems, reaction
chambers
Crude oil Holding vessel, piping Drilling equipment, valves Die coatings Aluminium, steel, GRP Casting and hot forming moulds
Fermentation residues
Vats Distillery and brewing equipment, fermentation vessels
Fish residue Working surfaces Cutting and slicing equipment
Flavourings Glass, plastics, rubber, stainless steel Mixing and applicator equipment Flour Millstones, plastics, rubber, stainless steel Milling and process equipment Fluxes Printed circuit board PCB contact probes, PCB test equipment, welded
surfaces Foam residues Cables, ducting, hydraulic hoses, mould vents EPS and EPU processing equipment Grease Practically all Acts as a degreasing process Logos Glass, metals, painted surfaces, plastics, rubber Screen and tampon printed components
Mastics Glass, metals, plastics, painted surfaces Applicators, sealed components Meat residues Bones, hides, metals, plastics Animal by-products, cutting and processing equipment Milk scale Glass, stainless steel, plastics Processing equipment
Mineral oils Practically all especially as degreasing process Electrical and mechanical components, surfaces to be coated
Mould release agents Low MP, alloys, aluminium, composite tooling, GRP, tool and stainless etc.
Moulding tools and adjacent press equipment
Oil, grease and dirt Cables, ducting, drive shafts, gears, hoses, switchgear, machine
All machines and engines especially when refurbishing
Organic growth Ceramics, metals, stoneware, plastics Holding tanks, water storage and purification equipment
Over spray Glass, metals, painted surfaces plastics, rubber Spraying equipment, Jigs, tools, etc. Paint Glass, metals, plastics, rubber Conveyors, strayed components, jigs, pre-painted
panels Paper residues Metals, plastics, painted surfaces, rubber Drying rollers and evacuation hoods, printing presses Powder build up Metals, plastics, painted surfaces, rubber Food and power processing machinery Printing inks Metals, plastics, painted surfaces, rubber Printing presses
Process spillage Machinery surfaces Process machinery
Protective coating Metals, plastics, painted panels Stored tools and equipment Radioactive contamination
Practically all Generally tools and equipment that need to be removed from active areas
Resin Metals PCB curing ovens, dies, tools and moulds used to extrude or form resin containing materials e.g. boards
Rubber Composites, metals Moulding press tools and press ancillaries Sugar and syrups Glass, metals, plastics, rubber Processing and transport vessels and equipment Tar Glass, metals, plastics, rubber Construction and processing equipment Vegetable oils Glass, metals, plastics, rubber Food processing and frying equipment
Wood pulp Glass, metals, plastics, rubber Paper making machinery
DDRRYY IICCEE BBLLAASSTTIINNGG AAPPPPLLIICCAATTIIOONNSS
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 7
EELLEECCTTRRIICCAALL AAPPPPLLIICCAATTIIOONNSS
The M.E.C. Microblast machines are units for cleaning equipments, machineries, plants, surfaces and so on by using pellets of solid CO2 (dry ice), blasted with an appropriate gun made on this purpose. The user’s and maintenance guide supplied with the machine reports the technical data and all the using precaution; furthermore it gives to the users different examples about “what to clean”. Especially the guide explains that the machine can also be used on electrical boxes under tension, but it specifies the right limits for this use, that means that it's possible to work on electrical boxes under tension until 1000 Volt (light tension) but not over. During the cleaning of boxes with electrical tension, the operator, with all the necessary protections and instructions, will not touch the electrical components and the CO2 isn’t absolutely an element of electrical transmission, and so for evident practical reasons the working’s distances place the operator in a very safe area. The Italian CEI rules, according to the European rules for the safety of the electrical plants, permit to work on electrical box with light tension, as for CEI 11/37 and 11/47 procedures, but even if they don't specify the cleaning of electrical box and in particular the CO2 using, without requesting any particular certification on the machines employed, or on the operators, but only requesting the necessary good sense and the use of individual protections. The laws and the Italian rules forbid works on and near machines and parts with tension over 1000 Volt. The European CE plate on the Microblast machine and the conformity declaration on the user’s and maintenance guide grant that the machines follow the requisitions of DPR 459/96, 89/392 CEE; 91/368 CEE, 93/68 CEE. These rules regulate the constructions of machines, the maintenance, the purpose for which they are on the market, so that the safety and the health of the operators are granted, respecting the limits and for the purposes he can work.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 8
BLASTER Double Hose Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Double Hose 2,5 - 8,5 3,1 - 4,2 0.5 - 1
Mod. 6 bar MB/AL Prneumatic
Types Dimension Weight Features od dry ice (mm) (kg) Pellets 3 mm 300 x 420 x h 800 35 Standard model Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Double Hose 2,5 - 10 3.1 - 5 0.5 - 1
Mod. 10 bar MB/AL - PS Pneumatic accessoriato Types Dimension Weight Features
od dry ice (mm) (kg) Pellets 3 mm 300 x 470 x h 800 40 Model accessories Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Mod. Double Hose 2,5 - 8,5 3.3 - 4.4 0.5 - 1
MB/AL - BIK 8 bar 0,03 - 0,07 BIK Bicarbonate Pneumatic
mixing Types Dimension Weight Features od dry ice (mm) (kg)
Pellets 3 mm 300 x 470 x h 800 40 More stronger Dual using Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Double Hose 2,5 - 8,5 2.05 0.5 - 1 12 bar
Mod. Pneumatic MB/AL - CRH Types Dimension Weight Features with crusher od dry ice (mm) (kg)
Pellets 3 mm 300 x 470 x h 800 53 All type of dry ice Cylinder 16mm tiles blocks
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 9
BLASTER Single Hose Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Pressurized 2,5 - 8,5 4,5 0.5 - 1,2
Mod. Single Hose system 6 bar MB/MONO
Types Dimension Weight Features od dry ice (mm) (kg) Pellets 3 mm 300 x 420 x h 800 47 standard model Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Single Hose system 2,5 - 8,5 4 0.5 - 1,2
Mod. Electro-peumatic 6 bar MB/MONO - ELT
Types Dimension Weight Features od dry ice (mm) (kg) Pellets 3 mm 300 x 420 x h 800 47 Accessories Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Pressurized 2,5 - 8,5 4,5 0.5 - 1,2
Mod. Single Hose system 6 bar MB/MONO - CRH
with crusher Types Dimension Weight Features od dry ice (mm) (kg) Pellets 3 mm 300 x 420 x h 800 47 Usa tutti i tipi cylinder 16mm di ghiaccio secco tiles blocks
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 10
MICRO - BLASTER Alice
Operating Working Pressure Air Consumption Dry ice consumption system (bar) (mc/min) kg/min
Pressurized 2 - 8,5 0.8 - 1.2 0.1 - 0.6
Mod. Single Hose system max 10 ALICE / NCJ Electro-pneumatic
Types Dimension Weight Features od dry ice (mm) (kg) Pellets 3 mm 550 x 440 x 980 mm 74 Precision Blasting system with micropellets Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Pressurized 1 - 6,5 0,80 0.1 - 0.6
Mod. Single Hose system 5 bar ALICE / B Electro-pneumatic
Types Dimension Weight Features od dry ice (mm) (kg) Pellets 3 mm 600 x 370 x 530 mm 58 Precision Blasting system with micropellets Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Pressurized 1 - 8.5 0,80 0.1 - 0.6
Mod. Single Hose system 5 bar ALICE / CC Electro-pneumatic
anti - condensa Types Dimension Weight Features od dry ice (mm) (kg) Pellets 3 mm 600 x 370 x 530 mm 58 Precision Blasting system with micropellets Operating Working Pressure Air Consumption Dry ice consumption
system (bar) (mc/min) kg/min Pressurized 1 - 8.5 1,00 0.1 - 0.6
Mod. Double Hose system 5 bar ALICE / BIK
con miscelatore Types Dimension Weight Features di polveri od dry ice (mm) (kg)
(bicarbonato) Pellets 3 mm 600 x 370 x 530 mm 58 Precision Blasting system with micropellets
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 11
MMIICCRROOBBLLAASSTT -- BBllaasstteerr
The dual-hose system uses the flu dynamic principle named "Venturi system". The dried compressed air
flows inside a hose and it reaches the gun: inside this gun a "Venturi" nozzle, creates before, through a
constriction, an increase of the air speed, to leave it expand after. This expansion creates a vacuum and
through the second hose dry ice pellets are sucked.
Pellets and compressed air are mixed and accelerated by the blasting barrel against the object to clean.
With the double-hose system the proportion between the nozzle (of the Venturi system) and the blasting
barrel is very precise and with a very low variance to get an optimal flu dynamic performance.
In particular the counter pressures which can be generated inside the barrel, for different construction
reasons or of compressed air supply, can reduce or cancel the Venturi effect and in this way not
aspirating pellets anymore or blasting them at lower speeds.
The dual – hose system can be used for 80% of all applications.
- Simple machine
- Reliable machine
- Maintenance almost non-existent
- Machine easy to use
- Extremely regular pellets supply
- Lower pellets consumption compared with the single hose because the pellets are conveyed through the separate pellets hose to the gun without being destroyed.
- Usable on all the materials, also on the sensible ones
DDUUAALL HHOOSSEE BBLLAASSTTIINNGG SSYYSSTTEEMM
BBeenneeffiittss
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 12
DDUUAALL –– HHOOSSEE BBLLAASSTTEERR
Microblast MB/AL - Venturi system Specification The MB/AL , dual - hose blasting unit is a very reliable machine, which doesn't need any maintenance. Its reliability has been proven in numerous tests and demonstrations , including field tests and endurance tests. It has been designed to be technically very simple in order to be suitable for any users with extensive cleaning requirements. It is small, compact to handle even in narrow spaces. It can be used on all the materials, also on the sensible ones. The MB/AL is supplied complete with the "Coax" gun with 3.5mt hose and cylindrical barrel. The dry ice tank has a capacity of 40 kg allowing the machine to be used for 45-60 minutes before refilling. With an operating pressure of up to 7 bar, the MB/AL provides extremely effective cleaning. The machine is made of Inox 304 It weights 40kg that's why it is very handily and its compact size allows to be fitted even in narrow spaces. The MB/AL dual – hose unit uses dry ice pellets with a diameter of 3mm.
Part: MB/AL
Technical data
Operating pressure Dry ice capacity Dry ice consumption Dimensions Weight Air connection Compressed air consumption* Dual hose Pneumatic functioning Venturi system Noise
= 2.5 8 bar = 40 kg = 30 60 kg/h = 300 x 420 x h 800mm = 35kg (31 + 4 pipes) = 1" BSP = 3.1 4.2 mc/min at 6 bar 90 dB(A) –120 dB(A) depend on the type of nozzle
* The compressed air must be kept clean and free of oil, foreign bodies and water.
Supply
Blaster Microblast MB/AL “Coax” blasting gun with 3.5 mt hose Cylindrical nozzle Lubrification oil Handbook
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 13
DDUUAALL –– HHOOSSEE BBLLAASSTTEERR Microblast MB/AL – PS with accessories
Specification The MB/AL - PS , dual - hose blasting unit is completed with all accessories, suitable for exigent users. The machine is made of Inox 304 and has a well-arranged , user-friendly control panel with all accessories making it simple to operate. The MB/AL-PS is supplied complete with the "Coax" gun with 3.5mt hose and cylindrical barrel. The dry ice tank has a capacity of 40 kg allowing the machine to be used for 45-60 minutes before refilling. With an operating pressure of up to 8 bar, the MB/AL- PS provides extremely effective cleaning and high performance. The machine weights 45kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The MB/AL-PS dual – hose unit uses dry ice pellets with a diameter of 3mm.
Part: MB/AL-PS
Technical data
Operating pressure Dry ice capacity Dry ice consumption Dimensions Weight Air connection Compressed air consumption Dual hose Pneumatic functioning Venturi system Noise
= 2.5 10 bar = 40 kg = 30 70 kg/h = 300 x 420 x h 800mm = 45kg (31 + 4 pipes) = 1" BSP = 3.1 5 mc/min at 10 bar 90 dB(A) –120 dB(A) depend on the type of nozzle
* The compressed air must be kept clean and free of oil, foreign bodies and water.
Accessories Turbine vibrating Earthing Air pressure adapter Rapid unlock of nozzles
Not intrusion in the coverlet Plate barrel Gun hose 5mt
Supply
Blaster Microblast MB/AL - PS “Coax” blasting gun with 5 mt hose Cylindrical nozzle Lubrification oil Handbook
On demand the functioning can be made all electric.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 14
DDUUAALL –– HHOOSSEE BBLLAASSTTEERR Microblast MB/AL - BIK with powder mixer
Specification The MB/AL - BIK, dual - hose blasting unit is complete with a powder mixer (bicarbonate). This machine is suitable for specific application where is necessary to mix at the dry ice a very low quantity of powder like the bicarbonate. This makes stronger the action of the dry ice. The MB/AL - BIK unit is suitable for the removal of graffiti, chewing –gum, inch, in the environment and building sector . The machine is made of Inox 304 and has powder mixer. The MB/AL – BIK is supplied complete with the "Coax" gun with 3.5mt hose and cylindrical barrel. The dry ice tank has a capacity of 40 kg allowing the machine to be used for 45-60 minutes before refilling. With an operating pressure of up to 7 bar, the MB/AL - BIK provides extremely effective cleaning in short time. The machine weights 40kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The MB/AL - BIK dual – hose unit uses dry ice pellets with a diameter of 3mm.
Part: MB/AL - BIK
Technical data
Operating pressure Dry ice capacity Dry ice consumption Dimensions Weight Air connection Bicarbonate consumption Compressed air consumption* Dual hose Pneumatic functioning Venturi system Powder mixer Noise
= 2.5 8.5 bar = 40 kg = 30 60 kg/h = 300 x 480 x h 800mm = 40 kg (36 + 4 pipes) = 1" BSP = 2 4 kg/h = 3.3 4.4 mc/min at 7 bar 90 dB(A) –120 dB(A) depend on the type of nozzle
* The compressed air must be kept clean and free of oil, foreign bodies and water.
Accessories
Turbine vibrating Earthing Air pressure adapter Rapid unlock of nozzles
Not intrusion in the coverlet Plate barrel Gun hose 5mt
Supply
Blaster MB/AL – BIK Bicarbonate feeder “Coax” blasting gun with 3.5 mt hose Cylindrical nozzle Lubrification oil Handbook
On demand the functioning can be made all electric.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 15
DDUUAALL –– HHOOSSEE BBLLAASSTTEERR Microblast MB/AL - CRH with crusher
Specification The MB/AL – CRH , dual - hose blasting unit is complete with a pneumatic crusher device which grinds all shape of dry ice (pellets, nuggets, tiles etc. ) in order to make micro pellets. The machine is made of Inox 304 and is supplied with a 3.5mt hose , standard gun , cylindrical barrel and a pneumatic crusher. The dry ice tank has a capacity of 18kg and the dry ice consumption goes from 30 to 50kg/h depends on the way you work. This machine weights 53 kg. It is compact in size and very useful for its crusher device which allows to use the machine anytime.
Part: MB/AL - CRH
Technical data
Operating pressure Dry ice capacity Dry ice consumption Dimensions Weight Air connection Compressed air consumption* Dry ice shape Crusher device Dual hose Pneumatic functioning Venturi system Noise
= 2.5 10 bar = 18 kg = 30 50 kg/h = 300 x 420 x h 800mm = 53 kg (49 + 4 pipes) = 1" BSP = 4,5mc/min at 6 bar = all shape (pellets, nuggets, tiles etc) 90 dB(A) –120 dB(A) depend on the type of nozzle
* The compressed air must be kept clean and free of oil, foreign bodies and water. Accessories
Turbine vibrating Earthing Air pressure adapter Rapid unlock of nozzles
Not intrusion in the coverlet Plate barrel Gun hose 5mt
Supply
Blaster MB/AL – CRH Pneumatic revolver device “Coax” blasting gun with 5 mt hose Cylindrical nozzle Pneumatic crusher Lubrification oil
On demand the functioning can be made all electric.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 16
Our range of accessories is characterised by several blasting guns, hoses and nozzles to suit various cleaning requirements. For any specific request we are able to provide prototypes an to design any special accessories in order to satisfy all customers needs. Cod. : MB/AL – 002
Model "Standard COAX" Material
Inox 304
Cod. : MB/AL – 102
Model "TIX"
Material
Titanium gun and carbonic fiber Extra- light
Cod. : MB/AL -A013bis
Model "Stampi 90°" Material
Inox 304
Uso High accessibility for moulds with anti
rebund
Cod. : MB/BIK-100
Model "S/A – Pistola Antiabrasione"
Material Inox 304 Uso To be use with some abrasive
Cod. DBS - 02
Model "Robot 2 -Pistola automatica"
Material Inox 304
Uso Automatic systems
DDuuaall hhoossee GGuunn GGUUNNSS-- DDoouubbllee HHoossee
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 17
Cod. : MB/AL – A049
Model "Standard "
Material Tufnol (resin fenolic) Lenght
250 ÷ 750 mm
Use
More applications
Cod. : MB/AL – A012
Model "Becco di Papera "Ugello piatto "
Material Aluminum Lenght
350 mm
Use
Large surface
Cod. : MB/AL – A011
Model
"Curvo 30° cilindrico"
Material Inox 304 / Aluminum Lenght
from 150 to 350 mm
Use
Hard entry
Cod. : MB/AL – 048
Model "Ugello Venturi Interno (L- M- H)"
Material Aluminum / inox
Capacity L – 2200 lt/min M – 3100 lt/min H - 4200 lt/min
Cod. : MB/AL - 055
Model "Boccola porta canotto antiusura "
Material Stainless crome
NNoozzzzllee –– DDoouubbllee HHoossee
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 18
Cod. : MB/BIK - 088
Model "AGA ugello cilindrico"
Material Use
Rubber/ Inox Abrasive mixing with dry ice
Cod. : MB/MO – A017
Model "Frantumatore"
Material Inox/ Aluminum
Use To change pellets in powder of dry ice.
Cod. : MB/AL – 027
Model "CCC – cilindrico"
Material
Lenght
Carbonic Fiber Ultra-light 100 – 250 mm
Cod. : MB/AL – A044
Model "Radiale 360°C – Ø 80 mm" Materiale
Aluminum
Use Internal pipe
NNOOZZZZLLEE –– DDoouubbllee HHoossee
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 19
Cod. : MB/AL – A019 - 35 Cod. : MB/AL – A019 - 50
Model: Silicone hose hight flessibility Hight pression elastomer hose for compressed air with aluminium fittings Lenght 3.5mt or 5mt untila 12mt
Cod. : MB/AL - A030
Model: fire protection heat Dimension: diam. 60mm
Cod. : MB/AL -A002
Model:
Air compressed hose 1"x10mt
PPIIPPEESS-- DDoouubbllee HHoossee
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 20
MMIICCRROOBBLLAASSTT -- BBllaasstteerr
The single hose system uses a mechanical mixer, like a niches or holes dispenser. Pellets come in from
the upper part of the distributor and this one, by turning, takes them to its lower part where the
compressed air which will take them out to the blasting gun is injected. During this course, pellets and
compressed air are mixed together inside the single-hose, and then they are accelerated inside the
blasting barrel against the object to clean.
In the single hose system, since it is a pressure pushing system for the pellets, the flu dynamic
nozzle/barrel balance is very stable and also the work efficiency will take advantage, since any possible
counter pressures created inside different blasting barrels don't modify the blasting speed and for this
reason, with the single hose system it is possible to use all kind of barrels, also the most particular and
special ones and also with higher pressures of compressed air supply.
- All kind of nozzles can be used independently from the pressure of the air supply
- Length of the gun hose until 35-40 m.
- Possibility of vertical cleaning almost without aggression reduction
- Hard soiling, incrustation and paint can be removed more easily due to the high discharge speed
SSIINNGGLLEE HHOOSSEE BBLLAASSTTIINNGG SSYYSSTTEEMM
BBeenneeffiittss
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 21
SSIINNGGLLEE –– HHOOSSEE BBLLAASSTTEERR MMiiccrroobbllaasstt MMBB//MMOONNOO--PPrreessssuurriisseedd ssyysstteemm
Specification The MB/Mono single - hose blasting unit is pressurized system useful for professional users with extensive and particular cleaning requirements. The machine is made of Inox 304 and it requires a minimum of maintenance The MB/MONO is supplied complete with the "Coax" gun with 5mt hose and cylindrical barrel. The dry ice tank has a capacity of 40 kg allowing the machine to be used for 45-60 minutes before refilling. With an operating pressure of up to 8 bar, the MB/MONO-10 provides extremely effective cleaning in short time. The machine weights 40kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The MB/MONO single – hose unit uses dry ice pellets with a diameter of 3mm.
Part : MB/MONO
Technical data
Operating pressure Dry ice capacity Dry ice consumption Dimensions Weight Air connection Compressed air consumption The compressed air must be kept clean and
free of oil, foreign bodies and water Single hose Pneumatic functioning Pressurised system Noise
= 2.5 10 bar = 40 kg = 30 70 kg/h = 300 x 470 x h 800mm = 47kg (43 + 4 pipes) = 1" BSP = 4.5 mc/min at 6 bar 90 dB(A) –120 dB(A) depend on the type of nozzle
Supply
Blaster MB/MONO Pneumatic revolver device “Coax” blasting gun with 5 mt hose Cylindrical nozzle Pneumatic crusher Lubrification oil
On demand the functioning can be made all electric.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 22
SSIINNGGLLEE –– HHOOSSEE BBLLAASSTTEERR
MMiiccrroobbllaasstt MMBB//MMOONNOO EELLTT ((eelleeccttrroo ppnneeuummaattiicc)) Description The MB/MONO - ELT single - hose blasting unit is An electrical power system useful for professional users with extensive and particular cleaning requirements. The machine is made of Inox 304 and it requires a minimum of maintenance. The MB/MONO ELT is supplied complete with the "Coax" gun with 7.5mt hose and cylindrical nozzle. The dry ice tank has a capacity of 40 kg allowing the machine to be used for 45-60 minutes before refilling. With an operating pressure of up to 8 bar, the MB/MONO-SP provides extremely effective cleaning in short time. The machine weights 47kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The MB/MONO-ELT single – hose unit uses dry ice pellets with a diameter of 3mm.
Part: MB/MONO ELT
Technical data
Operating pressure Dry ice capacity Dry ice consumption Dimensions Weight Air connection Compressed air consumption The compressed air must be kept clean and
free of oil, foreign bodies and water Single hose Pneumatic functioning Pressurised system Noise
= 2.5 10 bar = 40 kg = 30 70 kg/h = 300 x 470 x h 800mm = 45kg (41 + 4 pipes) = 1" BSP = 4.5 mc/min at 6 bar 90 dB(A) –120 dB(A) depend on the type of nozzle
Accessories
Turbine vibrating Earthing Air pressure adapter Rapid unlock of nozzles
Not intrusion in the coverlet Plate barrel Gun hose 7,5mt
Supply
Blaster MB/MONO-PS Pneumatic revolver device “Coax” blasting gun with 7,5 mt hose Cylindrical nozzle Lubrification oil Handbook
On demand the functioning can be made all electric.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 23
SSIINNGGLLEE –– HHOOSSEE BBLLAASSTTEERR MMiiccrroobbllaasstt MMBB//MMOONNOO-- CCRRHH ((wwiitthh ccrruusshheerr))
Description The MB/MONO – CRUSH single – is a pressurized single hose system complete with dry ice grinding. All type of dry ice can be used ( pellets, nuggets, tiles etc). The grinding system allows to grind all type of dry ice producing micro pellets. The machine is made of Inox 304 and it requires a minimum of maintenance. The MB/MONO – CRUSH is supplied complete with the "Coax" gun with 5mt hose and cylindrical barrel, pneumatic revolver device and pneumatic grinding. The dry ice tank has a capacity of 18 kg. With an operating pressure of 6 bar, the MB/MONO-CRUSH provides extremely effective cleaning in short time. The machine weights 40kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The MB/MONO –CRUSH single – hose unit uses Micro pellets of dry ice
Part : MB/MONO - CRH
Technical data
Operating pressure Dry ice capacity Dry ice consumption Quality dry ice Dimensions Weight Air connection Compressed air consumption The compressed air must be kept clean and
free of oil, foreign bodies and water Single hose Pneumatic functioning Pressurised system Noise
= 2.5 10 bar = 18 kg = 30 50 kg/h = all types (pellets, nuggets, tiles etc.) = 300 x 420 x h 800mm = 50kg (46 + 4 pipes) = 1" BSP = 4.5 mc/min at 6 bar 90 dB(A) –120 dB(A) depend on the type of nozzle
Supply
Blaster MB/MONO – CRH Pneumatic revolver device “Coax” blasting gun with 5 mt hose Cylindrical nozzle Pneumatic crusher Lubrification oil Handbook
The functioning can be made all electric.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 24
Our range of accessories is characterised by several blasting guns, hoses and nozzles to suit various cleaning requirements. For any specific request we are able to provide prototypes an to design any special accessories in order to satisfy all customers needs. Cod. : MB/RE - 019
Model "OR - Orizzontale" Material Inox 304/ aluminum
Cod.: MB/RE - 020 Model "VR gun – Verticale"
Material Inox 304
Cod. : MB/RE - 021 bis Model "90° AR"
Use Moulds
Material Inox 304
Cod. : MB/RE - 023 Model "TIX "
Material Titanium and cabonic
fiber Ultra-light
Cod. : DBS - 01 Model " Robot 1 -Automatico "
Material Stainless
Single hose - Gun
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 25
NNOOZZZZLLEE --SSiinnggllee HHoossee
Cod. : MB/MO – A001 Model "Standard 250"
Material lenght Use
Aluminum / inox 304 100- 750mm standard applications
Cod. : MB/MO – A004
Model "Uncino – PET J " Material Use
Inox 304 - copper Moulds PET for bottle
Cod. : MB/MO – A006 Model "Flessibile "
Material Lenght Use
Silicone 12 mt Heat and air condition Pipes
Cod. : MB/MO – A013 Model "Bifido"
Material lenght
Aluminum 320 mm Low Noise 93 dB(A) a 6 bar
Cod. : MB/MO – A017 Model "Frantumatore "
Material Lenght Use
Inox 304/aluminum 100 mm Soft use
Micropellets da 0.5 – 2 mm
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 26
NNOOZZZZLLEE --SSiinnggllee HHoossee Cod. : MB/MO – A030/3 Model "Frantumatore
classificatore" Lenght 120mm Dimension Micropellets
Ø 0.3 mm Ø 0.5 mm Ø 0.8 mm Ø 1 mm
Materiale Aluminum Cod. : MB/MO – A020 Model "AB II "
Material Lenght
Aluminum 400 mm Very low noise 89 d B (A) a 6 bar
Cod. : MB/MO – A050
Model "M2 Supersonic" Material Pellets/speed
Aluminum Ca. 500 m/sec
Use Hard surface
Cod. : MB/MO – A005 Model "Radiale 360° - Ø 120mm"
Material Diam. Use
Aluminum 80-120 mm Internal pipes
Cod. : MB/MO – A018 Model "Modellante 100 – 500mm"
Material Diam. Lenght Use
Copper 4-12 mm 100+1000 mm difficult entry
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 27
PPIIPPEESS –– SSiinnggllee HHoossee Cod. : MB/MO – A021 -50 Model Single Hose pipes
Lenght Material
From 5 to 50 mt Silicone
Cod. : MB/AL – A002
Model "Pipes"
Air compressed 1" x 10 mt
Cod. : MB/MO – A030 Model
Fire protection heat Diam - Ø 60 mm
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 28
MMIICCRROO -- BBLLAASSTTEERR // AALLIICCEE -- pprroodduuccttiioonn aanndd llaauunncchh ooff mmiiccrroo ––ppeelllleettss AALLIICCEE //NNCCJJ ssiinnggllee hhoossee
The ALICE/NCJ is a precision blasting machine for the production and launching of micro – pellets with pressurized single hose. It uses all type of dry ice, blocks, nuggets, tiles etc. The ALICE/NCJ is a PATENTED machine ideal for the micro - mechanic and for all industries where a special and precise cleaning application is required. This machine uses small quantity of compressed air. It is not noisy and it is easy handly. The machine is made of Inox 304 The Alice NCJ is supplied complete with the "Ice Mono " gun with 3mt hose and cylindrical nozzle. With an operating pressure of 6 bar, the ALICE/NCJ provides extremely effective cleaning in short time. The machine weights 74kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The dry ice capacity is 12kg
Part. ALICE/NCJ
Part : ALICE/NCJ
Technical data
Operating pressure Feeding pressure Electric consumption Dry ice capacity Dry ice consumption Quality dry ice Dimensions Weight Air connection Compressed air consumption Noise level The compressed air must be kept clean and
free of oil, foreign bodies and water Single hose
= 2 8,5bar = max 10bar = 220 V 50Hz 1KW monofase = 12 kg = 0,1 0,6 kg/min = all types (pellets, nuggets, tiles etc.) = 550 x 440 x h 980mm = 74kg = ½ " gas = 0,8 mc/min at 5 bar = 82 db(A) at 4 bar
Supply
Blaster ALICE/NCJ “ice-mono” blasting gun with 3mt hose Cylindrical nozzle Handbook
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 29
MMIICCRROO -- BBLLAASSTTEERR//AALLIICCEE -- pprroodduuccttiioonn aanndd llaauunncchh ooff mmiiccrroo ––ppeelllleettss AALLIICCEE//BB ssiinnggllee hhoossee
Description The ALICE/B is a single hose precision blasting machine for the production and launching of micro – pellets. It uses dry ice blocks The ALICE/B is a machine ideal for the micro - mechanic and for all industries where a special and precise cleaning application is required. The machine is made of Inox 304 The ALICE/B is supplied complete with the "Ice Mono " gun with 3mt hose and cylindrical nozzle. With an operating pressure of 6 bar, the ALICE/B provides extremely effective cleaning in short time. The machine weights 58kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The dry ice capacity is 12kg
Part: ALICE/B
Technical data
Operating pressure Feeding pressure Electric consumption Dry ice blocks capacity Dry ice consumption Quality dry ice Dimensions Weight Air connection Compressed air consumption Noise level The compressed air must be kept clean and
free of oil, foreign bodies and water Single hose
= 1 6,5bar = max 10bar = 220 V 50Hz 0,37KW monofase = 12 kg = 0,1 0,6 kg/min = Pellets 3mm = 600 x 370 x h 530mm = 58kg = ½ " gas = 0,8 mc/min at 5 bar = 82 db(A) at 4 bar
Supply
Blaster ALICE/B “ice-mono” blasting gun with 3mt hose Cylindrical nozzle Handbook
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 30
MMIICCRROO -- BBLLAASSTTEERR // AALLIICCEE –– pprroodduuccttiioonn aanndd llaauunncchh ooff mmiiccrroo ––ppeelllleettss AALLIICCEE //CCCC ssiinnggllee hhoossee
Description The ALICE/CC is a single hose precision blasting machine for the production and launching of micro – pellets. It uses dry ice blocks The ALICE/CC is a machine ideal for the micro - mechanic and for all industries where a special and precise cleaning application is required. The machine is made of Inox 304 The ALICE/CC is supplied complete with the "Ice Mono " gun with 3mt hose and cylindrical nozzle. With an operating pressure of 6 bar, the ALICE/CC provides extremely effective cleaning in short time. The machine weights 58kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The dry ice capacity is 12kg
Part : ALICE/CC
Technical data
Operating pressure Feeding pressure Electric consumption Dry ice blocks capacity Dry ice consumption Quality dry ice Dimensions Weight Air connection Compressed air consumption Noise level The compressed air must be kept clean and
free of oil, foreign bodies and water Single hose
= 1 8,5bar = max 10bar = 220 V 50Hz 0,37KW monofase = 12 kg = 0,1 0,6 kg/min = pellets 3mm = 600 x 370 x h 530mm = 58kg = ½ " gas = 0,8 mc/min at 5 bar = 82 db(A) at 4 bar
Supply
Blaster ALICE/CC “ice-mono” blasting gun with 3mt hose Cylindrical nozzle Handbook
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 31
MMIICCRROO -- BBLLAASSTTEERR//AALLIICCEE -- pprroodduuccttiioonn aanndd llaauunncchh ooff mmiiccrroo ––ppeelllleettss AALLIICCEE//BBIIKK dduuaall hhoossee
Description The ALICE/BIK is a dual hose precision blasting machine for the production and launching of micro – pellets mixed with bicarbonate. The ALICE/BIK is a machine ideal for the micro - mechanic and for all industries where a special and precise cleaning application is required. The machine is made of Inox 304 The ALICE/BIK is supplied complete with the "Ice Mono " gun with 3mt hose and cylindrical nozzle. With an operating pressure of 6 bar, the ALICE/BIK provides extremely effective cleaning in short time. The machine weights 49kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The dry ice capacity is 12kg
Part : ALICE/BIK
Technical data
Operating pressure Feeding pressure Electric consumption Dry ice blocks capacity Dry ice consumption Quality dry ice Dimensions Weight Air connection Compressed air consumption Noise level The compressed air must be kept clean and
free of oil, foreign bodies and water Single hose
= 1 8,5bar = max 10bar = 220 V 50Hz 0,37KW monofase = 12 kg = 0,1 0,6 kg/min = pellets 3mm = 600 x 370 x h 530mm = 49kg = ½ " gas = 0,8 mc/min at 5 bar = 82 db(A) at 4 bar
Supply
Blaster ALICE/BIK “ice-mono” blasting gun with 3mt hose Cylindrical nozzle Handbook
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 32
Our range of accessories is characterised by several blasting guns, hoses and nozzles to suit various cleaning requirements. For any specific request we are able to provide prototypes an to design any special accessories in order to satisfy all customers needs. Cod. : ALI 100
Model "Ice Mono" cilindrico Material Use
Polietilene / Nylon / Tuflon Multi purpose
Cod. : ALI 101
Model "Duck beak" - piatto Material Use
Polietilene / Nylon/ Aluminum Large surface
Alice Gun
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 33
Cod. : ALI 081
Lenght 120 mm Diam. 4-7mm
Model "Standard " Material Tufnol
Cod. : ALI – OP006
Section 2x20mm
Model "Paperino" Piatto
Material Aluminum
Cod: ALI/OP007/3 Cod. : ALIOP007/5 Cod. : ALI / OP – 007/8 Cod.: ALI / OP – 007/10
Material Aluminum Use soft surface
Model "Frantumatore/ classificatore" 0,3 mm, micro – pellets
0,5 mm, micro – pellets 0,8 mm, micro – pellets
1 mm, micro – pellets
Cod. : ALI / 090
Use Difficult entry
Model "Modellabile Ø 4 mm
Material Copper
Alice Nozzle
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 34
Alice Pipes Cod. : ALI 084 – 3
Material Silicone
Modell Single Hose Lenght from 3 to 10 mt
Cod. : ALI – OP005
Model "Tubazione " air compressed ½ " x 10 mt
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 35
Cod. : MB/AL – A005
Safety Kit: Cryogenic gloves, ear plugs, eye and ear protector, suit
Cod. : MB/AL – A008
Light for the gun
Cod.: MB/AL – A016
Earthing for guns and blasters
Cod.: MB/AL – A017 Air pressure adapter
AACCCCEESSSSOORRIIEESS FFOORR BBLLAASSTTEERR
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 36
AACCCCEESSSSOORRIIEESS FFOORR BBLLAASSTTEERR
Cod. ALI – OP001 Trolley for easy transport of ALICE
Cod. ALI – OP003 Air compresse heat Capacity: 1 mc/min Temperature aria: 20-120° C Power : 1.5 kw, 230V 50Hz Air Connection: ½ "
Cod.: MB/AL –A 018 Crusher Unit for produce the micro pellets, made from grinding of several types of dry ice (nuggest, tiles, blocks, pellets,ecc)
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 37
CCOOMMPPRREESSSSEEDD AAIIRR TTRREEAATTMMEENNTT
MMTTAA 4422 AAiirr ddrryyeerr
Compressed air quality In order to obtain the best efficiency of the M.E.C. dry ice blasting machines the quality of the compressed air is very important. The supply compressed air must be clean, oil – free, dry and free of foreign bodies. If the compressed air does not meet with the requirements, we recommend to use the M.E.C. appropriate compressed air treatment unit to clean the compressed air. Air Rate Most industrial facility have a compressed air supply which guarantee pressure of approximately 6-8bar and air rate 5-7m2 /min, sufficient for most applications. The air dryer group MTA 42 is used when the motor – compressor is in use or where the compressed air of the establishment is not purified by H2O and by oil. This is a complete unit composed of separator, dryer, freezing, cooling.
Part : MTA 42
Technical data
Working pressure = 16 bar max Air flow = 4200 l/min. – 252 mc/h Max entry aria temperature = 120 °C. Dewy point = + 3 ° C. Electric power = 1 KW a 230 V 50 Hz Dimensions = 1250 x 650 x h 1100 mm Weight = 120 kg. Air entry pipe = 1”1/4 Air exit pipe = 1” Filtration grade = 0,01 mm Residual oil = 0,01 mg/mc
Supply - Final cooler - Refrigerator drier - Pre – filter (oil and water) - Condensation separator
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 38
AACCCCEESSSSOORRIIEESS ffoorr ccoommpprreessssee aaiirr
Cod. : MTA 10 Cyclone moisture separator
6 m³/ min - 16 bar Inlet 1" Filtration 1 micron
Cod. : MTA 21
Fridge dryer 4,2 m³/ min 16 bar max Dew point + 3° C Power 1 kw 230 V 50 Hz Weight 120 kg connection I= 1 ¼" U=1"
Cod.: MB/AL – A007 Air Filter for air compress
4 m³/ min 16 bar Filtration 0.01 micron Oli 0.01 mg/mc
Cod.: MB/RIS - 17 Electrical heater compressed air of 1.5 Kw
To reduce humidity Capacity: 1 mc/min Temperature air: 20-120° C Power : 1.5 kw, 230V 50Hz Connection air : ½ "
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 39
DDRRYY IICCEE PPRROODDUUCCTTIIOONN -- PPeelllleettiizzeerrss M.E.C. Pelletizers are cryogenic machine for the production of ø 3mm standard blasting pellet. Our Pelletizers are known for the Excellent Technical Quality, the Reliability and the Great Productivity, they are designed for the continuous use. The dry ice pellets produced by our pelletizers are visibly more compact than standard ones and more resistant, ideal for various applications. To the M.E.C. Pelletizer you can adapt interchangeable die – plates in order to produce dry ice in different shapes and dimensions. Having your own Pelletizer means producing high density dry ice wherever and whenever you want!
Features and benefits Benefits obtained with the use of the High – density dry ice pellets made with the M.E.C. Pelletizers
- Better transportability due to the High – density of the dry ice pellets which are more resistant than standard ones , more compact and they don't break like regular dry ice.
- Longer shelf life, they don't sublimate quickly because of the higher concentration of dry ice particles which determine the high – density grade.
Benefits of the dry ice production in – house - Use of the dry ice "fresh" just made: manufacture and use. - Better control of the quality of the dry ice - Eliminate transport costs - Eliminate sublimation losses during transport - Production of the quantity needed , when you need it - Pelletizers are simple to install and use
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 40
PPEELLLLEETTTTIIZZEERR mmaakkeerr ooff ddrryy iiccee ppeelllleettss PP4400 MMCC
The P40 MC Pelletizer is designed in particular to produce small quantity of dry ice pellets with an High Density from the Liquid Carbon Dioxide at a very low temperature. In order to produce the snow and the gas you need a regular supply of Liquid CO2 from a storage tank which is fed at a very low pressure. The snow is then compressed through an extrusion plate from an interactive single horizontal piston , mechanically lead. The gas transferred outside the machine is then release in the atmosphere. The M.E.C. P40 MC is a unit which works without using any oil. It is made with special light alloy lead by an electric engine. All parts are designed in particular to work on a laboratory table. This mechanic system is suitable for using with interchangeable die –plate in order to produce different dry ice shapes. In order to obtain an excellent functioning, it is advisable to use the Liquid CO2 without moisture. The Carbon dioxide is a melted and non – toxic gas easy to store in working spaces. It is electrically non – conductive and it is non –inflammable. The necessary equipments for this kind of plants are generally the following: a Liquid CO2 refrigerated tank A pelletizer and a Liquid CO2 line for the connection.
Part P40 MC
Advantages:
- Compact - Easy to use - Low cost investment - Capacity up to 30kg/hr - Cuts dry ice storage and transport losses - Ideal for laboratories, hospitals, food distributors, Industries, caterers etc.
Technical data
Pellets dimensions = ø 3mm cylindric Pellets length = 5 10mm Productivity = 35 kg/h Electric power = 1,1 Kw Electric supply = 400 V - 50Hz Dimensions = 1000 x 360 x 530mm Weight = 75 kg Liquid CO2 entry pressure = 20 bar Liquid CO2 purity = max 20 ppm of H2O Liquid CO2 feeding pipe = ø ½ " insulated CO2 exhaust pipe = ø 1 ¼"
Supply
- P40 MC Pelletizer - Die plate 3 mm. - Maintenance kit - User’s guide
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 41
PPEELLLLEETTTTIIZZEERR mmaakkeerr ooff ddrryy iiccee ppeelllleettss PP110000EE
The pelletizer P100 and produces dry ice pellets with high quality. The production of dry ice pellets occurs with the transformation of 'liquid carbon dioxide (CO2 L) in the solid. A regular supply of liquid CO2 from a storage tank is fed at low pressure to produce dry ice and gas. The snow is then compressed through an extruder die by a single horizontal piston mechanically driven. This fully automated system is a 'unit is ideal for producing large quantities of dry ice pellets of about 100 kg / h. The return gas transferred out of the car is released into the atmosphere or recovered. P100 of MEC unit is functioning completely dry (no oil needed). This mechanical system can adapt interchangeable dies to produce large quantities of dry ice of different dimensions . To Reach optimum operation of the machine is recommended that the 'use of liquid CO2 without moisture. Carbon dioxide is a non-toxic liquefied gas that is cheap and easy to store in places of works. Is a device easy to handle and install, requires only electricity and supply of liquid CO2. Functioning: mechanic
Part P100E
Technical data
Pellets diameter = 3 mm. cylindrical for blasting Pellets length = 5 10 mm. Productivity = 100 kg/h (adjustable) Electric power = 3 KW with 6 poles Electric supply = 400 V 50 Hz Dimensions = 1400 x 550 x 1330 mm Weight = 540 kg. Liquid CO2 entry pressure = 12 21 bar Liquid CO2 purity = max 20 ppm of H2O Liquid CO2 feeding pipe = ¾” insulated CO2 exhaust pipe = 2”
Supply
- P100E Pelletizer - Die plate 3 mm. - Maintenance kit - User’s guide
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 42
PPEELLLLEETTTTIIZZEERR mmaakkeerr ooff ddrryy iiccee ppeelllleettss PP115500EE
The pelletizer P150 and produces dry ice pellets with high quality. The production of dry ice pellets occurs with the transformation of 'liquid carbon dioxide (CO2 L) in the solid. A regular supply of liquid CO2 from a storage tank is fed at low pressure to produce dry ice and gas. The snow is then compressed through an extruder die by a single horizontal piston mechanically driven. This fully automated system is a 'unit is ideal for producing large quantities of dry ice pellets of about 150 kg / h. The return gas transferred out of the car is released into the atmosphere or recovered. P150 of MEC unit is functioning completely dry (no oil needed). This mechanical system can adapt interchangeable dies to produce large quantities of dry ice of different dimensions . To Reach optimum operation of the machine is recommended that the 'use of liquid CO2 without moisture. Carbon dioxide is a non-toxic liquefied gas that is cheap and easy to store in places of works. Is a device easy to handle and install, requires only electricity and supply of liquid CO2. Functioning: mechanic
Part P150E
Technical data
Pellets diameter = 3 mm. cylindrical for blasting Pellets length = 5 10 mm. Productivity = 150 kg/h (adjustable) Electric power = 3 KW with 6 poles Electric supply = 400 V 50 Hz Dimensions = 1400 x 550 x 1330 mm Weight = 580 kg. Liquid CO2 entry pressure = 12 21 bar Liquid CO2 purity = max 66 ppm of H2O Liquid CO2 feeding pipe = ¾” insulated CO2 exhaust pipe = 2”
Supply
- P100E Pelletizer - Die plate 3 mm. - Maintenance kit - User’s guide
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 43
PPEELLLLEETTTTIIZZEERR mmaakkeerr ooff ddrryy iiccee ppeelllleettss PP330000EE
The pelletizer P300 and produces dry ice pellets with high quality. The production of dry ice pellets occurs with the transformation of 'liquid carbon dioxide (CO2 L) in the solid. A regular supply of liquid CO2 from a storage tank is fed at low pressure to produce dry ice and gas. The snow is then compressed through an extruder die by a single horizontal piston mechanically driven. This fully automated system is a 'unit is ideal for producing large quantities of dry ice pellets of about 300 kg / h. The return gas transferred out of the car is released into the atmosphere or recovered. P300 of MEC unit is functioning completely dry (no oil needed). This mechanical system can adapt interchangeable dies to produce large quantities of dry ice of different dimensions . To Reach optimum operation of the machine is recommended that the 'use of liquid CO2 without moisture. Carbon dioxide is a non-toxic liquefied gas that is cheap and easy to store in places of works. Is a device easy to handle and install, requires only electricity and supply of liquid CO2. Functioning: mechanic
Part P300E
Technical data
Pellets diameter = 3 mm. cylindrical for blasting Pellets length = 5 10 mm. Productivity = 300 kg/h (adjustable) Electric power = 3 KW with 6 poles Electric supply = 400 V 50 Hz Dimensions = 1400 x 550 x 1330 mm Weight = 890 kg. Liquid CO2 entry pressure = 12 21 bar Liquid CO2 purity = max 66 ppm of H2O Liquid CO2 feeding pipe = ¾” insulated CO2 exhaust pipe = 2”
Supply
- P100E Pelletizer - Die plate 3 mm. - Maintenance kit - User’s guide
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 44
PPEELLLLEETTTTIIZZEERR ffoorr tthhee pprroodduuccttiioonn ooff ddrryy iiccee ppoowwddeerr ffrroomm ddrryy iiccee bblloocckkss GGRR BBLLOOCCKK
The GR – BLOCK is a dry ice powder producer from dry ice blocks. This equipment is a 'good solution for countries where supplies are available only to blocks of dry ice. The GR - BLOCK has a very compact, easy to use and hold in a little spaces. Produttivity: 50 - 100 kg / h This units can be combined with both the MB / AL Double Venturi tube launcher with the MB / MONO pressurized Monotube cleaning technique. Functioning: electro – pneumatic
Part GR – BLOCK
Technical data Operating production = 50 100 kg/h Compressed air consumption = 20 lt/min at 2 bar Electrical supply = 0,5 Kw ad 220 V Dry ice box dimensions = 230 x 460 x 200 h mm. Dimensions = 1150 x 550 x h 1200 mm. Weight = 86 kg. Construction = all in stainless steel type Aisi 304 Supply
- GR- Block - Blades set to 4 mm. - Frame - Lubrication kit - User’s guide
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 45
Cod. : P – 40 - 9 Plate for Pelletizer P 40 MC
Cod. : P- 40 - 16
Plate Ø 3 mm for Pelletizer P 100E
Cod. : P – 100 – 16 Plate Ø 16 mm for Pelletizer P 100 E
Cod. : P – 100 -1,7 Plate Ø 9 mm for pelletizer P 100 E
AAcccceessssoorriieess ffoorr PPeelllleettiizzeerrss
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 46
DDRRYY IICCEE BBLLOOCCKKSS PPRROODDUUCCEERR
BB//IICCEE 775500 The Dry Ice Blocks a small and compact machine which produces in few minutes dry ice blocks ( 500gr or 750gr). This is an easy solution for customers who likes to produce the dry ice in small quantity and when they need it. The functioning is very simple: the dry ice blocks producer has to be connected to the Liquid CO2 tank.
Weight Block gr 750 Dimension block mm 70 x 70 x 200 Production No 10 blocks 30 kg of CO2 Net weight of the machine Kg 3 Dimension machine mm 120 x 120 x h240
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 47
CCRRYYOOBBOOXX –– iinnssuullaatteedd ccoonnttaaiinneerrss ffoorr tthhee ssttoorraaggee ooff ddrryy iiccee
- Optimum preservation of the pellets freshness and density - Easy to transport and handle - Robust and durable
- Insulated for optimum preservation - Temperature resistant to –80°C (-112°F) - Fork lift accessible
Technical specification: P: ALI – OP002 Cryobox 60M
Material : Internal dimensions : 350x780xh280 mm External dimensions : 400x850xh380 mm Pellets capacity kg. : 60 Tare : 12 Sublimation loss kg/h : 0,42
P : MB/AL – A009 Cryobox 125M
Material: Internal dimensions : 430x530xh650 mm External dimensions : 570x725xh840 mm Pellets capacity kg. : 125 Tare : 40 Sublimation loss kg/h : 0,42
P: MB/AL – A040 Cryobox 250 T
Material Internal dimensions : 960 x 500 x h 720 mm External dimensions: 1150 x 700 x h920 mm Pellets capacity kg. : 250 Tare: 145 Sublimation loss kg/h: 0,43
P: MB/AL – A031 Cryobox 300A
Material : Internal dimensions: 800 x 800 x h 610 mm External dimensions: 1000 x 800 x h 930 mm Pellets capacity kg: 300 Tare: 60 Sublimation loss kg/h: 0,49:
Accessories P : MB/AL – A029 Frame with wheels for cryobox 125 M
P : MB/AL – A032
Follower pellets from cryobox and / or the blaster
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 48
DDRRYY IICCEE NNOONN –– RREETTUURRNNAABBLLEE BBOOXX -- IInnssuullaatteedd bbooxx
Technical specification:
P : SC/ICE - 10 Insulated polystyrene /carton non – returnable box the dry ice storage – Capacity: 10kg
P: SC/ICE - 20
Insulated polystyrene /carton non – returnable box for the dry ice storage – Capacity: 20kg
P: SC/ICE - 50
Insulated polystyrene /carton non – returnable box for the dry ice storage – Capacity: 50 kg
P: SC/ICE - 80
Insulated polystyrene /carton non – returnable box for the dry ice storage – Capacity: 80kg
P: SC/ICE - 160
Insulated polystyrene /carton non – returnable box for the dry ice storage – Capacity: 160kg
P: SC/ICE - 250
Insulated polystyrene /carton non – returnable box for the dry ice storage – Capacity: 250kg
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 49
ENGINEERED SYSTEMS
BLAST ROOM The Blast Room is a cabin for manual operation of Dry Ice Blasting completed with automatic dust remover. This blast room has been designed for dry ice cleaning applications that require continuous and uninterrupted operations. This room is a quiet, soundproof enclosure with advances system to collect the contaminant being removed.
Supply - Cabin completed with automatic dust remover - Sequencer for filter cleaning - Illumination system - User’s guide
Part CA/CR-T
Technical data
Useful dimensions = 4200 x 5000 x h 3500 mm. Doors opening = 2500 x h 2500 mm Air flow of dust remover = 7000 mc/h Dust filtration grade = < 5 mg/mc Noise reduction = > 40 dB(A) Installed power = 7,5 KW Electric power = 400 V 50 Hz
All systems are custom configured based on the application.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 50
ENGINEERED SYSTEMS SILENT BOX
Description The Silent Box is a sound – proof cabin for dry ice blasting with containment of dangerous residues. This silent box can be used with all types of M.E.C. blaster Microblast. Supply
- Sound – proof cabin - Rotating platform for cleaning work - Air aspiration and filtration system - User' s guide
The Silent Box can also be supplied without the air aspiration and filtration system.
Part : CA/SI – 1.0
Technical data
Internal useful dimensions = 1100 x 1100 x h 1100 mm. Operating platform dimensions = 1000 mm. Dust filtration grade = < 5 mg/mc Sound level for the operator = 80/85 dB(A) Noise attenuation = around 30 dB(A) a 7 bar Operating platform capacity = 400 kg Air aspiration = up to 1000 mc/h Installed power = 1 ,5 Kw Electric supply = 380 V 50 Hz
Part : CA/SI – 1,0
Silent Box 1,0 sound – proof
Part : CA/SI – 1,2
Silent box 1,2 sound – proof
Part : CA/SI – 1,5
Silent box 1,5 sound – proof
Accessories
Operating platform with electrical mechanic rotation CO2 Level detector in the working area
All systems are custom configured based on the application.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 51
AAUUTTOOMMAATTIICC PPLLAANNTTSS BBLLAASSTTIINNGG SSYYSSTTEEMM
Description The Dry Ice Blasting system is a completed system for the automatic operation of dry ice blasting, in cabin, through reciprocator, rotating/inclinable platform and with auto-production of solid CO2 pellets. With the Dry Ice Blasting system is possible to use all models of M.E.C. blasters and all types of barrels and nozzles on the robot gun.
Part : AU/BL – SY
Supply - Cabin completed with automatic dust remover - Sequencer for filter cleaning - Illumination system - Cartesian reciprocator Rotating/inclinable platform - Visual control system - Commanding pulpit - CO2 gas detector - Pelletizer P100E - Die plate 3 mm. - Maintenance kit - Flexible connection P100E – MB - Automatic control system of pellets quality - Microblast / AL - “Coax” gun with con gun tubes of 15 m and cylindrical nozzle - Timed pneumatic agitator - Greasing kit - User' s guide
Technical data
All systems are custom configured based on the application.
- Room useful dimensions - Doors opening - Air flow of dust remover - Dust filtration grade - Noise reduction - Installed power - Electric power - Software - Cartesian reciprocator axles - Useful courses of axle X - Useful courses of axle Y - Useful courses of axle Z . - Reciprocator inclination - Vertical wrist translation - Horizontal wrist translation - Translating weight
- - Max power of the nozzle
= 4200 x 5000 x =h3500mm = 2500 x h 2500 mm = 7000 mc/h = < 5 mg/mc = > 40 dB(A) = 14 KW = 380 V 50 Hz = PLC Allen-Bradlel = 6 grades of liberty = 2000 mm. = 1800 mm = 500 mm = 0°45° = 30° = 30° = 10 kg. = 400 N
- X &Y axles translation speed - Z axles translation speed
- - Rotating platform capacity - - Platform inclination - - Platform rotation
- Visual control system - CO2 detector - Pellets diameter - Pellets length - Productivity - Electric power - Electrical supply - Dimensions - Weight - Liquid CO2 entry pressure - Liquid CO2 purity - Liquid CO2 feeding pipe - CO2 exhaust pipe
= 3 m/min = 1 m/min = 8000 kg
- = 0°45° = 0°180° =high solution coloured video camera = alarm at 1500 ppm = 3 mm. cylindrical for blasting = 5 10 mm. 3 = 30 80 kg/h (adjustable) = 3 KW at 6 poles = 380 V 50 Hz = 1750 x 550 x h 1350mm = 290 kg. = 12 21 bar = max 66 ppm of H2O = ¾” insulated
= 2”
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 52
AAUUTTOOMMAATTIICC PPLLAANNTTSS
MB/FXX - fully automatic system for the dry ice cleaning on the production line The MB/FXX is an autonomous distribution system which can be integrated on a robotic production line. It can be controlled directly from a field bus (Profibus ...) or using pre-programmed recipes. Benefits P: MB/FXX - Uninterrupted operation 24h/24h - No contact with dry ice pellets - The only manual operation is the replacement of container which serves as a pellet hopper system - Pellets capacity from 20 to 80kg/h - System monitored and managed continuously on all
physical parameters and functionality - No contact of pellets with the humidity of the air - Double hose blasting technology of launching of dry ice pellets
Technology advantages - Fully automatic machine driven by an automation - Manual or controlled by a program operation - Weighing and continuous setting of the CO2 pellets flow (20 to 80 kg / h) - Continuous operation. A 100 kg tank had an average autonomy of 2 hours at a rate of 45 kg/h - Interchangeable tank - Measurement of the substrate temperature - Integration and external control possible: digital inputs, Profibus, on demand - Shelf life of CO2 pellets in the tank up to 48 hours.
Applications - Cleaning and degreasing of surfaces before treatment - Cooling system integrated in the process - Products cleaning after treatment: dusting, decaling. - Co – treatment: - Integrated operation of cleaning / degreasing - Integrated cooling system
TANK CO2 L
M.E.C.
PELLETTIZER For the dry ice
production
CRYOBOX
For the storage of dry ice
MB / FXX
Example of the Automatic plant integrated on a production line
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 53
SERVICES AND SOLUTIONS OFFERED BY M.E.C. In order to satisfy all customer needs, M.E.C. offers different services and dry ice blasting solutions. Dry Ice production M.E.C. produces and delivers dry ice high density in different shapes:
- Micro – pellets Ø 1,7mm - Pellets da ø 3mm - Cylinders ø 16mm - Tiles 120 x 120 sp 10 – 60 - Tiles 150 x 210 sp 10 – 60
- Blocks 500gr and 750gr
Dry Ice supply M.E.C. provides delivery of the Dry Ice within 24h also during Christmas time and mid – August holiday. M.E.C. does not effectuate holiday closure. Furthermore M.E.C. coordinates delivery schedules in order to satisfy any customer needs. CO2 Service The CO2 cleaning service with dry ice offered by M.E.C. is handled either at the customer ' s site or in our cleaning facility . All onsite cleaning services are handled including after hours and weekends by factory – trained technicians able to handle any customer requests and any applications. Furthermore M.E.C. offers an In – house CO2 cleaning service at our facility fully equipped to handle a range of cleaning and stripping applications. Rental M.E.C. offers a rentals services, providing the customer with the right quantity of dry ice necessary for the use of M.E.C. Blasters. For the quotation contact M.E.C. Assistance M.E.C. puts at the customer's disposal the ability of its professionals for maintenance works on M.E.C. plants and cryogenic machines. M.E.C. professionals are able to:
- Handle complex installations in order to maximise the performance of the machines. - Manage regularly scheduled maintenance programs to keep your machine working at maximum efficiency - Answer questions and provide support when customer need it - Provide maintenance and replacements when needed - Provide temporary replacement machines while your system is being repaired at our factory.
Training M.E.C. offers a Training useful for the correct use of the machines. The training can be handle in - house or to the customer. Maintenance Programs M.E.C. offers to the customers a regularly scheduled maintenance programs. If during the maintenance it would be necessary to replace a parts , M.E.C. guarantees the replacement as soon as possible at an additional cost. Spare parts and accessories M.E.C. warehouse is complete with all accessories and spare parts in order to guarantee the delivery of them, with express courier in 24 – 48h. Abroad, in some Countries as for example the Middle East the delivery is guaranteed in 72h. M.E.C. professionals are able to handle the installation of spare parts when requested by the customer.
M.E.C. srl Tel. +39 0321 653800 – Fax. +39 0321 653007 – [email protected] - www.meccrios.com 54
WARRANTY INFORMATION The warranty lasts for twelve months for M.E.C. manufactured equipments and it commences on the Date of shipment of them. The warranty gives the possibility to change all the parts with manufacturing or material defects without any additional cost, but it doesn’t give the possibility to have a refund for any work breakages or for any other damages. From the warranty are excluded all the travelling expenses necessary to repair the machine at the customer’s workshop or the transport expenses necessary to send the machine to the manufacturer's workshop and to send it back. The warranty finishes if the customer makes some changes without the manufacturer's permission and if the customer does not respect the terms of payment. Any variation of the terms of payment must be authorized in written by M.E.C. . Any claim must be made in writing to M.E.C. within 7 days after the defect is discovered. If the claim is not made within that period, this warranty will be deemed or released therefore. This warranty shall not apply and M.E.C. shall neither be responsible nor liable for:
a. Consequential, collateral or special losses, damages or the non – suitability of the equipments for the purpose intended
b. Equipment conditions caused by abnormal conditions of use, accident, neglect of the equipment, improver storage or damages resulting during shipment.
c. Deviation from the equipment' s prescribed maintenance programs, replacement parts d. Labour charges, loss or damage resulting from improper operation, maintenance or repairs made by person
(s) other than MEC authorized service representative. e. Improper application of the product
M.E.C. does not assume the responsibility for any event arising from breach of this warranty .
Warranty extension M.E.C. offers the Warranty Extension Service of additional one or two years. For the quotation contact M.E.C. AFTER SALES SUPPORT M.E.C. Srl provides after sales support to our customers by qualified technically trained staff able to handle any kind of maintenance of our Dry Ice Blasting products. At our factory based in Caltignaga (NO) Italy, we provide also the training for the correct usage of our machines anytime the customer needs and for free.
www.meccrios.com
METODOLOGIEECOLOGICHECRIOGENICHE
M.E.C. srlViale Italia, 1928010 Caltignaga (NO) ItaliaTel. +39 0321 653800Fax. +39 0321 653007E-mail: [email protected] Web: www.meccrios.com
www.meccrios.com
METODOLOGIEECOLOGICHECRIOGENICHE