Drum Pump Range - Global Pumps Australia | … · Techniflo drum pumps are lightweight, handy and extremely powerful ... TP - 700 DRE TP - 700 DRA Pump Type Pump Tube Type Flow Rate

Drum Pump Range

S40701

2 or to request a quoteT(+61 8) 8275 8000F(+61 8) 8275 8099

[email protected]

For more information 12 Selgar AvenueClovelly Park SA 5042

Contents

3

Electric Powered

Electric Powered

Electric Powered

Electric Powered

Electric Powered

Electric Powered

Electric Powered

Electric Powered

Air Powered

Electric powered

Electric Powered

Electric Powered

TP - 160

TP - 180

TP - 280

TP - 360

TP - 380

TP - 400Ex, ATEX Approved

TP - 500SM, Three Phase

TP - Air 1, 2, 3

TP - 700SR, High Viscosity

TP - 700DRE

TP - DRA

Accessories

5

5

5

6

6

6

7

7

8

9

9

9

10

Introduction

Examples of Liquids

TP - 125, 128, 132

4

4

Electric Powered

Introduction

Examples of liquids

Techniflo drum pumps are lightweight, handy and extremely powerful devices suitable for transferring thin to low viscous, neutral or corrosive liquids. Designed for portable and static use, the pumps are particularly suitable for intermittent operation. The combination of both electric powered and compressed air powered state-of-the-art motors are simple — yet have a high technical design which will assure sound and reliable operation. Because of their modular concept, every motor can be combined with every pump tube. The delivery rate can be regulated in accordance with your needs. An electronic power regulator is available for this purpose.

Pumps fitted with compressed air motors and stainless steel pump tubes provide a particularly high level of safety when pumping lightly flammable liquids of various danger classes from one container to another.

Hydrochloric acid, soda lye, formic acid, sal ammoniac, photo developer, lime potash, fixing baths, acetic acid, phosphoric acid, fruit acids, nitric acid, hydrofluoroc acid, bleaching solution, water, lactic acid, boric acid, chromic acid, alcohols, food additives, soap solutions and a wide range of other liquids.

For flammable liquids and for use in explosive surroundings, explosion-proof drum pumps with necessary accessor ies can be suppl ied.

Motor and pump tube require ATEX approval for flammable liquids.

4

Electric Powered

TP - 125, 128, 132

TP - 160

TP - 180

Pump Type

Pump Tube Type

Flow Rate (l/min)

Head Rotor/Impeller (m)

Max Viscosity (MPas)

Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)

Motor Voltage (V/Hz)

Weight (kg)

TP-125, 128, 132

PP/SS 316Ti

22/30/40

4

200

25/28/32/PP28/32SS

500/700/1000/1200

sealless

250 (universal motor)

240/50

2-4

TP-160

PP/PVDF/SS 316Ti/Al

80

6/12

300

41

700/1000/1200/1500+

sealless (SS with mech seal)


240/50

7-10

Pump Type

Pump Tube Type

Flow Rate (l/min)



Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)


Weight (kg)

TP-180

PP/PVDF/SS 316Ti/Al

150

8/21

500

41

700/1000/1200/1500+



240/50

7-10

Pump Type

Pump Tube Type

Flow Rate (l/min)



Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)


Weight (kg)

Laboratory pump. Suitable for drums and containers with a narrow neck.

Pump tube can be combined with an air motor or any other TECHNIFLO motor.

Double insulated, category II, Splash proofing, to IP24.

O n / o f f s w i t c h T h e r m o -protection.

Suitable for liquids with specific gravity up to 1.35.

With electronic speed control available as an option.


On/off switch with low voltage release as standard.

Overload protection switch.

Suitable for pumping fluid acids and bases, neutral, aggressive and non-flammable liquids.


With electronic speed control available as an option.



Overload protection switch.5

Electric Powered

TP - 280

TP - 360

TP - 380

Pump Type

Pump Tube Type

Flow Rate (l/min)



Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)


Weight (kg)

TP-280

PP/PVDF/SS 316Ti/Al

200

14/28

1000

41

700/1000/1200/1500+



240/50

7-10

TP-360

PP/PVDF/SS 316Ti/Al

93

74

11/26 max

600

41

700/1000/1200/1500+


650

240/50

7-10

Pump Type

Pump Tube Type

Flow Rate Rotor (l/min)

Flow Rate Impeller (l/min)



Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)


Weight (kg)

TP-380

PP/PVDF/SS 316Ti/Al

112

74

16/37 max

1000

41

700/1000/1200/1500+


825

240/50

7-10

Pump Type

Pump Tube Type

Flow Rate Rotor (l/min)

Flow Rate Impeller (l/min)



Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (kW)


Weight (kg)

Industrial grade.

Suitable for liquids with specific gravity greater than 1.5.

With electronic speed controlavailable as an option.




Suitable for pumping fluid acids and bases, neutral, aggressive and non-flammable liquids.


With electronic speed control and soft start.

Double insulated, category II, rated to IP55.



Suitable for pumping fluid acids and bases, neutral, aggressive and non-flammable liquids

Suitable for liquids with specific gravity up to 1.9

With electronic speed control and soft start

Double insulated, category II, rated to IP55

On/off switch with low voltage release as standard

Overload protection switch6

Electric Powered

TP - 400EX, ATEX Approved TP-400Ex

PP/PVDF/SS 316Ti/Al

100

8/20

600

41

700/1000/1200/1500+


550 Ex

240/50

12-15

Pump Type

Pump Tube Type

Flow Rate (l/min)



Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)


Weight (kg)

EX protected pump, suitable for flammable liquids.

EC Type Examination.

Cert No. DEMKO 03 ATEX 135563X.

EEx de IIA T6.

Splash proofing to IP54.

On/off and overload protection switch.

7

Air Powered

TP - AIR 1

TP - AIR 2

TP - AIR 3

Pump Type

Pump Tube Type

Flow Rate (l/min)



Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)

Weight (kg)

TP-AIR 1

PP/PVDF/SS 316 Ti/Al

90

10/24

400

41

700/1000/1200/1500+


300W at max 6 bar

operating pressure

3-5

TP-AIR 2

PP/PVDF/SS 316Ti/Al

120

10/27

600

41

700/1000/1200/1500+


700W at max 6 Bar

operating pressure

3-5

Pump Type

Pump Tube Type

Flow Rate (l/min)



Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)

Weight (kg)

TP-AIR 3

PP/PVDF/SS 316Ti/Al

120

10/27

600

41

700/1000/1200/1500+


400W at max 6 Bar

operating pressure

4-5

Pump Type

Pump Tube Type

Flow Rate (l/min)



Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)

Weight (kg)

Compressed air motor withball valve for compressed aircontrol. This regulates the motor speed and varies thepumping capacity.


Cert No IBEx U05 ATEX B007 X

Compressed air motor withstarting button on the handle.The pump starts transferringliquids when the button ispressed.

An ATEX version with 600Wis also available.

8

C o m p r e s s e d a i r m o t o r , Stainless Steel housing, with plug valve at air intake for compressed air control. This regulates the motor speed and varies the pumping capacity.


Cert No IBEx U05 ATEX B007 X

Electric Powered - High Viscosity

TP - 700 SR

TP - 700 DRE

TP - 700 DRA

Pump Type

Pump Tube Type

Flow Rate (l/min)

Delivery Head (m)


Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (W)

Stator Material

Weight (kg)

TP-700 SR

SS 316Ti

12/25/50

60 single stage/120 double stage

20,000

54

700/1000/1200-2000

Mechanical seal or gland

825W

NBR, NBR light, Hypalon,

Viton, EPDM and PTFE

6-14

Universal, solidly built, handyand powerful pump. For lightand viscous liquids such aspaint, varnish, oil, soap, washingliquids, fruit juice, jam, etc.

Driven by universal motor,TP-280 or compressed airmotors TP-AIR 2 and TP-AIR 3.

Pump tube with planetary gear(15:1).

Powerful, high-viscosity pumpfor permanent operation. Forp u m p i n g h i g h l y v i s c o u s substances such as latex basedpaint, glue, cream, paste, gel,chocolate mass, honey, etc.

D r i v e n b y 3 - p h a s e w i t h 0.37/0.55/0.75 or 1.1kW at700rpm or 900 rpm. Withpump hanger, flexible or rigidcoupling.

Versat i le , sol idly bui l t andpower fu l eccent r ic sc rew pump for highly viscous media such as sediment, pastes, soap, shampoo, honey, syrup,jam, ketchup, etc.

Dr iven by compressed a i rmotors TP-AIR 4 (0.5kW),6 (1.0kW), 8 (1.5kW).

With pump hanger, f lexibleor rigid coupling.

Pump Type

Pump Tube Type

Flow Rate (l/min)

Delivery Head (m)


Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (kW)

Stator Material

Weight (kg)

TP-700 DRE

SS 316Ti

12/25/50


20,000

54

700/1000/1200-2000


0.37-2.2kW



15-30

Pump Type

Pump Tube Type

Flow Rate (l/min)

Delivery Head (m)


Tube Diameter (mm)

Tube Length (mm)

Construction

Motor Power (kW)

Stator Material

Weight (kg)

TP-700 DRA

SS 316Ti

12/25/50


100,000

54

700/1000/1200-2000


0.5-1.5kW



15-25

9

ACCESSORIES

Nozzle: Brass Nickel Plated, Teflon seal, rotating jointIdeally suited for filling and transferring liquids also in the food and pharmaceutical industry.

Hose connection: 25mm or 32mmWorking pressure: max. 4 barViscosity: 750 MPasFlow rate: 80 l/mmLiquid temperature: max. 80°CWeight: 1.4 kg

Strainer: Polypropylene Strainer,Stainless SteelRecommended when pumping dirty or contaminated liquidswith abrasive particles.

Nozzle: PolypropyleneHousing and internal pieces in black polypropylene PP, valve seats and O-rings are in Viton(FPM), spring in Titanium.

Hose connection: 19mm or 25mmWorking pressure: max. 2 barViscosity: 750 MPasFlow rate: 100 l/mmLiquid temperature: max. 50°CWeight: 0.26 kg

Barrel adaptors, PP• Ø41 mm• Ø32 mm

Barrel adaptors, Stainless Steel• Ø41 mm• Ø32 mm

Emission proof drum adaptor• PP• Brass• SS 316Ti

The adaptor prevents emission of harmful gases and vapours out of the drum.

Electronic FlowmeterPolypropylene housing. Other materials: POM, PVDF or Stainless Steel.Option: Volume pre-set, I/P & O/P for further data processing.

Mixing Pump Tube -Double Function

For pumping and mixing, sealless pump tubes made of PP with tube Ø50mm and lengths of 1m

for 200 litre drums and 1.2m for containers available. SS mixing pump tube is certified to conform to ATEX.

PP PVDF

SS316Ti AL

For different applications depending on the liquids, pump tubes are available in PP, PVDF, SS 316Ti and Aluminium. The pump tubes are connected to the motor via hand-wheel and can be fitted and removed with a few rotations fast and easy without the need of any special tools.• Pump tubes with axial-flow rotor are to be used for high

delivery rate and low head.• Pump tubes with radial-flow impeller are the right

choice for low delivery rate and high head.

10

or to request a quoteT(+61 8) 8275 8000F(+61 8) 8275 8099

[email protected]

For more information 12 Selgar AvenueClovelly Park SA 5042

Drum Pump Range

Stock Availability

• A comprehensive range of pumps & spares are held in stock to meet immediate requirements.

Expertise

• Trained and experienced product specialists with expertise in handling the complete range of Techniflo products.

Technical Support

• Full technical information covering all aspects of pump performance including compatibility with materials and systems design...................

Advice

• Reliable advice regarding pump unit assembly, installation, operation, preventative maintenance programming and spare parts inventory..................

Service Support

• Full repair and service capabilities including scheduled servicings.....................................................

Quality Control

• Techniflo pumps are manufactured strictly in accordance with the requirements of ISO 9001:2008 to ensure the highest levels of product quality.

or to request a quoteT(+61 8) 8275 8000F(+61 8) 8275 8099

[email protected]

For more information

12 Selgar Avenue

Clovelly Park SA 5042

S:\In

dust

rial\D

RA

WIN

GS

\Spec

Sheets

\S40701

Documents

Drum Pump Range - Global Pumps Australia | … · Techniflo drum pumps are lightweight, handy and extremely powerful ... TP - 700 DRE TP - 700 DRA Pump Type Pump Tube Type Flow Rate