DRIVEN and STATIC TOOLING DOOSAN BMT55 · driven and static tooling for doosan bmt55 10139 bergin rd. howell, mi 48843 phone : 877-91-tools ( 810-632-4446 ) fax: 877-92-tools ( 810-632-4467

DRIVEN and STATIC TOOLING

For

DOOSAN BMT55

10139 BERGIN RD. HOWELL, MI 48843 PHONE : 877-91-TOOLS ( 810-632-4446 ) FAX: 877-92-TOOLS ( 810-632-4467 ) EMAIL: [email protected] WEBSITE: www.mdtooling.com June 2013

mailto:[email protected]

http://www.mdtooling.com/

Live Tooling M. T. Marchetti, a major live tool manufacturer in northern Italy, is a leader in live tool technology. The formula is simple. Use only the best angular contact high-speed bearings available. Add to this an exacting tolerances for all ground shafts, gears and bearing pocket features. Next, develop a sealed system that will not allow any contamination from chips or coolant. Top this all off with a superior design and you end up with a live tool that is more rigid, faster and will last longer. We back this up with a 2-Year factory warranty.

Our Live Tool Warranty Our tooling will give years of service in the most demanding applications. The superior design and rugged construction has proven this over the last 12 years. The reliability of our tools allows us to provide a 2-year factory warranty. MD TOOLING will repair any defective tool holders for a period of 2 years from the date of purchase.

Product Range We have the largest range of live tooling available for most major machine tool manufactures. Our available products include an extensive line of standard live tooling as well as specialty toolholders such as 0-90 and 0-180 adjustable angle tool holders, gear hobbers, and even worm gear generators. Our product range includes geared up holders to 60,000 RPM and are engineered for 1,000 PSI coolant through. We are an industry leader in providing complete tooling solutions with hundreds of static tool options as well.

Technical Support Here at MD Tooling we have a full technical support department with over 25 years of CNC experience. Our highly qualified staff can help with part processing, tooling up a job from a blue print and even assist with part programming. Applications Engineers are always available by phone to answer any questions you may have about our tooling or any other CNC related issue.

Stock and Replenishment MD Tooling maintains an extensive inventory of tooling in our warehouse in Michigan. Our current “fi ll” rate on orders is 93% from our stock in Michigan for same day shipping. Should you require a non-stock item, our manufacturer, M.T. Marchetti also maintains a large inventory in Italy. Tooling can be obtained in as little as 3-5 business days.

Shipping MD Tooling realizes that when you need tooling, often you can’t wait until the next day. We process orders and ship from available stock right up until 5PM EST to make certain we get your tooling solutions to you as quickly as possible. We regularly ship throughout the day via DHL, UPS, FedEx or any other carrier that a customer requests.

10139 Bergin Road Howell, MI 48843 Phone: 810 632-4446 Fax: 810 632-4467 Email: [email protected] Web: www.mdtooling.com

Fast, Friendly, Reliable Service!

Quality tooling at highly competitive pricing.

2-Year Warranty on all live tools.

Extensive inventory. We currently ship over 93% of all orders same day.

In-house repair services available.

If a warranty tool needs to be returned for inspection, service or repair, loaner tools are available to keep you up and running.

More specialty tool holders than any other manufacturer.

Custom tool holders available.

All available tooling may not be shown in this catalog. If you can’t find the holder you’re looking for, please contact this office for assistance.

BMT 45LYNX 220 LM

BMT 55PUMA 230 / PUMA 240 (M - MS) / PUMA 280 LM

PUMA 1500-2000-2500 (M-MS-Y-SY) / LINX 300 M

PUMA 2100 SERIES / PUMA TT1500 - 1800 (MS-SY)

PUMA TL2000/2500 (M) / MX1600ST - MX2100ST

PUMA GT2100 M

BMT 65PUMA 300/MS - V400M - TT2000SY - TT2500SY - TT2500MS

PUMA 2600 / 3100 SERIES - MX2000ST - MX2500LT / ST / LST

MX2600T - ST - VT 450M / TM - PUMA INVERTURN 3000 M

BMT 75PUMA 400 - PUMA 480M / LM / XLM

VT 750 / TM

BMT 85VT900M / TM - VT1100M

PUMA 600M / LM - PUMA 700M / LM - PUMA 800M / LM

BMT - Machine Model Cross Reference List

Note: The BMT sizes above list the machines with that model of turret. Please be aware all tools offered in each BMT may not fit every machine model listed.

BMT55 1DRIVEN 1

RADIAL DRIVEN TOOL 1RADIAL DRIVEN TOOL RE-DIRECTED IN Z BY 36mm DRIVEN TOOL 1GEARED-DOWN RADIAL RE-DIRECTED DRIVEN TOOL 2GEARED-UP RADIAL RE-DIRECTED DRIVEN TOOL 2RADIAL GEARED-UP DRIVEN TOOL I=1:5625 3RADIAL SINGLE-SIDE TWIN HEAD DRIVEN TOOL IN Y-AXIS 3AXIAL DRIVEN TOOL H=60mm 4AXIAL DRIVEN TOOL H=70mm 5AXIAL DRIVEN TOOL H=85mm 6AXIAL REAR-SET DRIVEN TOOL 6AXIAL GEARED-UP DRIVEN TOOL I=1:2 7AXIAL GEARED-UP DRIVEN TOOL I=1:5.625 8AXIAL DRIVEN TOOL FOR INTERNAL POLYGON MAKING 9AXIAL OPPOSITE FACE DRIVEN TOOL 10AXIAL OPPOSITE FACE DRIVEN TOOL REAR SET 10AXIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL 11AXIAL GEARED-UP 1:2 SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y 110-90 ADJUSTABLE ANGLE DRIVEN TOOL 120-180 ADJUSTABLE ANGLE DRIVEN TOOL 120-180 ADJUSTABLE ANGLE DRIVEN TOOL H=83 130-180 ADJUSTABLE ANGLE GEARED-UP DRIVEN TOOL H=47.5mm 130-180 ADJUSTABLE ANGLE GEARED-UP DRIVEN TOOL H=83 14GEAR HOBBER 14GEAR HOBBER - RADIAL DRIVEN 15BROACHING/SLOTTING TOOL 15DRIVEN TOOLHOLDER FOR STEADY REST - SIZE 1 15

STATIC 16RADIAL REVERSIBLE SINGLE SIDE TWIN STATIC TOOL 16RADIAL DOUBLE SIDE TWIN STATIC TOOL 16RADIAL BLADE HOLDER - WITH BLADES 16AXIAL STATIC TOOL 17AXIAL SINGLE BORING BAR HOLDER 50mm/2" H=100mm 17AXIAL SINGLE BORING BAR HOLDER 17AXIAL SINGLE BORING BAR HOLDER 100mm INTERAXIS 18AXIAL 2 + 2 POSITION BORING BAR HOLDER 18AXIAL 4 + 4 POSITION BORING BAR HOLDER 19TAILSTOCK FOR SUBSPINDLE 19

ACCESSORIES 20DRIVEN 20

POLYGON MAKING MILL HEAD (2 INSERTS) 20POLYGON MAKING MILL HEAD (3 INSERTS) 20

Table of ContentsCategorized Listing

BMT55 DRIVENRADIAL DRIVEN TOOL

Part Number Description Spindle I RPM Coolant Thru ExtCoolant

A A1 D LDWO 0900325 Radial ERA25 BMT55 ERA25 1:1 6000 X 42.50272232 Radial ER32 BMT55 ER32 1:1 6000 X 85.060270225 Radial ER25 BMT55 Coolant Thru* ER25 1:1 6000 X X 86.060271025 Radial ERA25 BMT55 Coolant Thru* ERA25 1:1 6000 X X 63.030272332 Radial ER32 BMT55 Coolant Thru* ER32 1:1 6000 X X 85.160271617 Milling Head D=16mm, L=17mm 16x17 1:1 6000 X 70 16 170272219 Milling Head D=22mm, L=19mm 22x19 1:1 6000 X 70 22 19

RADIAL DRIVEN TOOL RE-DIRECTED IN Z BY 36mm DRIVEN TOOL

Part Number Description Reversible Spindle I RPM ExtCoolant

A A1 D L0720025 ER25 Redirected X ER25 1:1 6000 X 106.860720032 Radial ER32 Redirected X ER32 1:1 6000 X 120.560720016 Milling Head D=16mm, L=17mm

RedirectedX 16x17 1:1 6000 X 88.5 16 17

0720022 Milling Head D=22mm, L=19mmRedirected

X 22x19 1:1 6000 X 90.5 22 190720027 Milling Head D=27mm, L=21mm

RedirectedX 27x21 1:1 6000 X 92.5 27 21

All prices are subject to change without notice and we reserve the right to correct misprints.

June 2013 : www.mdtooling.com Phone: 810-632-4446 : Fax: 810-632-4467 1

BMT55 DRIVENGEARED-DOWN RADIAL RE-DIRECTED DRIVEN TOOL


A A1 D L0722132 Geared-Down 2:1 ER32 Redirected X ER32 2:1 3000 X 120.560722116 Geared-Down Milling Head D=16mm,

L=17mm RedirectedX 16x17 2:1 3000 X 88.5 16 17

0722122 Geared-Down Milling Head D=22mm,L=19mm Redirected

X 22x19 2:1 3000 X 90.5 22 190722127 Geared-Down Milling Head D=27mm,

L=21mm RedirectedX 27x21 2:1 3000 X 92.5 27 21

GEARED-UP RADIAL RE-DIRECTED DRIVEN TOOL

Part Number Description Reversible Spindle I RPM Ext Coolant A0721225 Geared-Up 1:2 ER25 Redirected X ER25 1:2 12000 X 108.56



BMT55 DRIVENRADIAL GEARED-UP DRIVEN TOOL I=1:5625

Part Number Description Spindle I RPM Coolant Thru Ext Coolant ADWO 0600116 Geared-Up 1:5.625 ER16 ER16 1:5.625 22500 X 95.25DWO 0600111 Geared-Up 1:5.625 ER11 ER11 1:5.625 22500 X X 107.45

RADIAL SINGLE-SIDE TWIN HEAD DRIVEN TOOL IN Y-AXIS

Part Number Description Spindle I RPM Ext Coolant A0730016X2 Y AXIS Double Outlet ER16 ER16 1:1 6000 X 84.50730025X2 Y AXIS Double Outlet ER25 ER25 1:1 6000 X 85



BMT55 DRIVENAXIAL DRIVEN TOOL H=60mm

Part Number Description DoosanRef.

Reversible Spindle RPM CoolantThru

ExtCoolant

A A1 A2 B D L0310825 Axial ER25 H=60mm R78684 X ER25 6000 X 80.16 480311025 Axial ER25 Coolant Thru* H=60mm R78777A X ER25 6000 X X 80.66 71.50311432 Axial ER32 H=60mm X ER32 6000 X 97.66 480311032 Axial ER32 Coolant Thru* H=60mm X ER32 6000 X X 98.16 71.50310022 Weldon 20 H=60mm X Weldon

206000 X 100 48

0311617 Milling Head D=16mm, L=17mmH=60mm

X 16x17 6000 X 61 48 16 170312219 Milling Head D=22mm, L=19mm

H=60mmX 22x19 6000 X 62 48 22 19



H=60mmX 27x21 6000 X 64 48 27 21



H=60mmX 27x50 6000 X 62.5 48 27 50




Part Number Description Reversible Spindle RPM CoolantThru

ExtCoolant

A A1 A2 B D LDWO 0240125 ER25 Standard H=70mm X ER25 6000 X 80.16 48DWO 0240225 ER25 H=70mm Coolant Thru* X ER25 6000 X X 80.66 71.5DWO 0240132 ER32 Standard H=70mm X ER32 6000 X 97.66 48DWO 0240232 ER32 H=70mm Coolant Thru* X ER32 6000 X X 98.16 71.5DWO 0240022 Weldon 20 H=70mm X Weldon 20 6000 X 100 48DWO 0241617 Milling Head D=16mm, L=17mm

H=70mmX 16x17 6000 X 61 48 16 17

DWO 0242219 Milling Head D=22mm, L=19mmH=70mm

X 22X19 6000 X 62 48 22 19DWO 0242240 Milling Head D=22mm, L=40mm

H=70mmX 22X40 6000 X 62 48 22 40


X 27X21 6000 X 64 48 27 21DWO 0242733 Milling Head D=27mm, L=33mm

H=70mmX 27X33 6000 X 61 48 27 33


X 27X50 6000 X 62.5 48 27 50




Part Number Description Reversible Spindle CoolantThru

ExtCoolant

A A1 A2 B D LDWO 0020125 Axial ER25 H=85mm X ER25 X 82.36 48DWO 0020225 Axial ER25 H=85mm Coolant Thru* X ER25 X X 81.76 71.5DWO 0020132 Axial ER32 H=85mm X ER32 X 98.16 48DWO 0020232 Axial ER32 H=85mm Coolant Thru* X ER32 X X 97.56 71.5DWO 0020022 Weldon 20 H=85mm X Weldon 20 X 100 48DWO 0021617 Milling Head D=16mm, L=17mm H=85mm X 16x17 X 61 48 16 17DWO 0022219 Milling Head D=22mm, L=19mm H=85mm X 22X19 X 62 48 22 19DWO 0022240 Milling Head D=22mm, L=40mm H=85mm X 22X40 X 62 48 22 40DWO 0022721 Milling Head D=27mm, L=21mm H=85mm X 27X21 X 64 48 27 21DWO 0022733 Milling Head D=27mm, L=33mm H=85mm X 27X33 X 61 48 27 33DWO 0022750 Milling Head D=27mm, L=50mm H=85mm X 27X50 X 62.5 48 27 50

AXIAL REAR-SET DRIVEN TOOL

Part Number Description DoosanReference

Reversible Spindle I RPM Ext Coolant0630025 ER25 Standard Rear-Set H=78mm R78685 X ER25 1:1 6000 X



BMT55 DRIVENAXIAL GEARED-UP DRIVEN TOOL I=1:2

Part Number Description Reversible Spindle I RPM CoolantThru

ExtCoolant

H B0891225 Geared-Up 1:2 ER25 H=60mm X ER25 1:2 12000 X 60 52.50891325 Geared-Up 1:2 ER25 H=60mm Coolant

Thru*X ER25 1:2 12000 X X 60 79

0893725 Geared-Up 1:2 ER25 H=70mm CoolantThru*

X ER25 1:2 12000 X X 70 790892425 Geared-Up 1:2 ER25 H=85mm X ER25 1:2 12000 X 85 52.50893625 Geared-Up 1:2 ER25 H=70mm X ER25 1:2 12000 X 700892525 Geared-Up 1:2 ER25 H=85mm Coolant

Thru*X ER25 1:2 12000 X X 85 79



BMT55 DRIVENAXIAL GEARED-UP DRIVEN TOOL I=1:5.625

Part Number Description Reversible Spindle I RPM CoolantThru

ExtCoolant

A HDWO 0190116 Geared-Up 1:5.8 ER16 H=60mm X ER16 1:5.625 22500 X 121.8 60DWO 0190111 Geared-Up 1:5.8 ER11 Coolant Thru*

H=60mm X ER11 1:5.625 22500 X 134 60

DWO 0190316 Geared-Up 1:5.8 ER16 H=70mm X ER16 1:5.625 22500 X 121.8 70DWO 0190311 Geared-Up 1:5.8 ER11 Coolant Thru*

H=70mm X ER11 1:5.625 22500 X 134 70

DWO 0190216 Geared-Up 1:5.8 ER16 H=85mm X ER16 1:5.625 22500 X 121.8 85DWO 0190211 Geared-Up 1:5.8 ER11 Coolant Thru*

H=85mmX ER11 1:5.625 22500 X 134 85



BMT55 DRIVENAXIAL DRIVEN TOOL FOR INTERNAL POLYGON MAKINGSee Accessories for Polygon Making Mill Heads


A A1 B H0319125 Internal Polygon-Making ER25

H=60mmX ER25 1:1 6000 X 82.35 89 60

0319108 Internal Polygon-Making Weldon 8H=60mm

X Weldon 8 1:1 6000 X 76.5 89 600319110 Internal Polygon-Making Weldon 10

H=60mmX Weldon 10 1:1 6000 X 76.5 89 60

0319112 Internal Polygon-Making Weldon 12H=60mm

X Weldon 12 1:1 6000 X 76.5 89 600319116 Internal Polygon-Making Weldon 16

H=60mmX Weldon 16 1:1 6000 X 73.5 89 60

DWO 0249125 Internal Polygon-Making ER25H=70mm

X ER25 1:1 6000 X 82.35 99 70DWO 0249108 Internal Polygon-Making Weldon 8

H=70mmX Weldon 8 1:1 6000 X 76.5 99 70

DWO 0249110 Internal Polygon-Making Weldon 10H=70mm

X Weldon 10 1:1 6000 X 76.5 99 70DWO 0249112 Internal Polygon-Making Weldon 12

H=70mmX Weldon 12 1:1 6000 X 76.5 99 70


X Weldon 16 1:1 6000 X 76.5 99 70DWO 0029125 Internal Polygon-Making ER25

H=85mmX ER25 1:1 6000 X 82.35 114 85



H=85mmX Weldon 10 1:1 6000 X 76.5 114 85



H=85mmX Weldon 16 1:1 6000 X 73.5 114 85



BMT55 DRIVENAXIAL OPPOSITE FACE DRIVEN TOOL

Part Number Description Reversible Spindle RPM Ext Coolant A B H H1DWO 0080132 Double Outlet ER32/ER32 H=60mm X ER32+ER32 6000 X 100.56 78.96 60 34DWO 0080332 Double Outlet ER32/ER32 H=70mm X ER32+ER32 6000 X 100.56 78.96 70 34DWO 0080232 Double Outlet ER32/ER32 H=85mm X ER32+ER32 6000 X 100.56 78.96 85 34DWO 0080125 Double Outlet ER25/ER25 H=60mm X ER25+ER25 6000 X 93.36 73.46 60 34DWO 0080325 Double Outlet ER25/ER25 H=70mm X ER25+ER25 6000 X 93.36 73.46 70 34DWO 0080225 Double Outlet ER25/ER25 H=85mm X ER25+ER25 6000 X 93.36 73.46 85 340311625 Double Outlet ER25/ER16 H=60mm X ER25+ER16 6000 X 81.86 66 60 29DWO 0242516 Double Outlet ER25/ER16 H=70mm X ER25+ER16 6000 X 81.86 66 70 29DWO 0022516 Double Outlet ER25/ER16 H=85mm X ER25+ER16 6000 X 81.86 66 85 290311616 Double Outlet ER16/ER16 H=60mm X ER16+ER16 6000 X 81.2 66 60 29DWO 0241616 Double Outlet ER16/ER16 H=70mm X ER16+ER16 6000 X 81.2 66 70 29DWO 0021616 Double Outlet ER16/ER16 H=85mm X ER16+ER16 6000 X 81.2 66 85 29

AXIAL OPPOSITE FACE DRIVEN TOOL REAR SET

Part Number Description Reversible Spindle I RPM Ext Coolant0632525 Off-Set Double Outlet ERA25/ERA25 H=70mm X ER25A+ER25A 1:1 6000 X



BMT55 DRIVENAXIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL

Part Number Description Reversible Spindle I RPM Ext Coolant A HDWO 0100216 Y AXIS Double Outlet ER16 H=60mm X ER16 1:1 6000 X 115.15 60DWO 0100225 Y AXIS Double Outlet ER25 H=60mm X ER25 1:1 6000 X 115.61 60DWO 0102216 Y AXIS Double Outlet ER16 H=70mm X ER16 1:1 6000 X 115.15 70DWO 0102225 Y AXIS Double Outlet ER25 H=70mm X ER25 1:1 6000 X 115.61 70DWO 0101216 Y AXIS Double Outlet ER16 H=85mm X ER16 1:1 6000 X 115.15 85DWO 0101225 Y AXIS Double Outlet ER25 H=85mm X ER25 1:1 6000 X 115.61 85

AXIAL GEARED-UP 1:2 SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y


A HDWO 0950216 Geared-Up 1:2 ER16 H=60 Single Side Twin

Head in YX ER16 1:2 12000 X 115 60

DWO 0950225 Geared-Up 1:2 ER25 H=60 Single Side TwinHead in Y

X ER25 1:2 12000 X 115.96 60DWO 0951216 Geared-Up 1:2 ER16 H=70 Single Side Twin

Head in YX ER16 1:2 12000 X 115 70


X ER25 1:2 12000 X 115.96 70DWO 0952216 Geared-Up 1:2 ER16 H=85 Single Side Twin

Head in YX ER16 1:2 12000 X 115 85


X ER25 1:2 12000 X 115.96 85



BMT55 DRIVEN0-90 ADJUSTABLE ANGLE DRIVEN TOOL


A A1 D L0360020 0-90 Adj Angle ER20 Driven Tool X ER20 1:1 6000 X 84.160360025 0-90 Adj Angle ER25 Driven Tool X ER25 1:1 6000 X 85.660361617 0-90 Adj Angle Milling Head D=16mm

L=17mm X 16x17 1:1 6000 X 65 16 17

0362219 0-90 Adj Angle Milling Head D=22mmL=19mm

X 22x19 1:1 6000 X 66 22 190361905 0-90 Adj Angle Milling Head D=3/4"

L=3/4"X 3/4"x3/4" 1:1 6000 X 65 3/4" 3/4"

0-180 ADJUSTABLE ANGLE DRIVEN TOOL

Part Number Description Spindle I RPM Coolant Thru Ext CoolantDWO 0660120 0-180 Adj.Angle ERA20 H=47.5mm ERA20 1:1 6000 XDWO 0660220 0-180 Adj.Angle ERA20 H=47.5mm, Coolant Thru* ERA20 1:1 6000 X X



BMT55 DRIVEN0-180 ADJUSTABLE ANGLE DRIVEN TOOL H=83

Part Number Description Spindle I RPM Coolant Thru Ext CoolantDWO 0661120 0-180 Adj.Angle ERA20 H=83mm ERA20 1:1 6000 XDWO 0661220 0-180 Adj.Angle ERA20 H=83mm, Coolant Thru* ERA20 1:1 6000 X X

0-180 ADJUSTABLE ANGLE GEARED-UP DRIVEN TOOL H=47.5mm

Part Number Description Spindle I RPM Coolant Thru Ext CoolantDWO 0660316 0-180 Adj.Angle Geared-Up 1:2 H=47.5mm ERA16 1:2 12000 XDWO 0660416 0-180 Adj.Angle Geared-Up 1:2 H=47.5mm,

Coolant Thru*ERA16 1:2 12000 X X



BMT55 DRIVEN0-180 ADJUSTABLE ANGLE GEARED-UP DRIVEN TOOL H=83

Part Number Description Spindle I RPM Coolant Thru Ext CoolantDWO 0661316 0-180 Adj.Angle Geared-Up 1:2 H=83mm ERA16 1:2 12000 XDWO 0661416 0-180 Adj.Angle Geared-Up 1:2 H=83mm, Coolant

Thru*ERA16 1:2 12000 X X

GEAR HOBBER

Part Number Description Reversible I RPM Ext Coolant D mm D Inch0621100 Gear Hobber 1:1 X 1:1 6000 X 16-22-27-32 3/4"-1"-1 1/4"0622100 Geared-Down Gear Hobber 2:1 X 2:1 3000 X 16-22-27-32 3/4"-1"-1 1/4"



BMT55 DRIVENGEAR HOBBER - RADIAL DRIVEN

Part Number Description I RPM Ext Coolant D mmDWO 0051108 Radial Gear Hobber 1:1 D=8mm 1:1 6000 X 8DWO 0051110 Radial Gear Hobber 1:1 D=10mm 1:1 6000 X 10DWO 0051113 Radial Gear Hobber 1:1 D=13mm 1:1 6000 X 13DWO 0051116 Radial Gear Hobber 1:1 D=16mm 1:1 6000 X 16

BROACHING/SLOTTING TOOL

Part Number Description I RPM Reversible Ext. CoolantDWO 1030100 Broaching/Slotting Tool 4:1 2000 X X

DRIVEN TOOLHOLDER FOR STEADY REST - SIZE 1

Part Number Description I RPM Ext CoolantDWO 0930300 Driven Toolholder for Sliding Steady Rest Size 1 1:1 6000 XDWO 0930300A Driven Toolholder for Sliding Steady Rest Size 1 with BlueTooth 1:1 6000 X



BMT55 STATICRADIAL REVERSIBLE SINGLE SIDE TWIN STATIC TOOL

Part Number Description # of Tools Reversible Dimensions H K1 K2 D1 D20772540 Y AXIS Radial Double Rev. Single-Side

Tool: 1"2 X Inch 1" 3/8" 3/8" 1 3/8" 1 3/8"

0772500 Y AXIS Radial Double Rev. Single-SideTool: 25mm

2 X mm 25 10 10 35 35

RADIAL DOUBLE SIDE TWIN STATIC TOOL

Part Number Description # of Tools Reversible Dimensions H K1 K2 D1 D20762540 Y AXIS Radial Double Rev. Double-Side

Tool: 1"4 X Inch 1" 3/8" 3/8" 1 3/8" 1 3/8"

0762500 Y AXIS Radial Double Rev. Double-SideTool: 25mm

4 X mm 25 10 10 35 35

RADIAL BLADE HOLDER - WITH BLADES

Part Number Description # of Tools Reversible Ext CoolantDWO 0730132 Radial Blade Holder 1 X XBLADEKIT Blade Kit: 1 Blade, 10 Inserts for Tool 0730132



BMT55 STATICAXIAL STATIC TOOL

Part Number Description # of Tools Reversible Dimensions B HDWO 0422540 Axial Static Tool 1" x 1" 1 X Inch 1" 1"DWO 0422500 Axial Static Tool 25mm x 25mm 1 X mm 25 25

AXIAL SINGLE BORING BAR HOLDER 50mm/2" H=100mm

Part Number Description # of Tools Reversible Coolant Thru Ext. Coolant Dimensions DDWO 1115080 Single Boring Bar Holder 2" H=100mm 1 X X X Inch 2"DWO 1115000 Single Boring Bar Holder 50mm H=100mm 1 X X X mm 50KIT 1000002 Plug for 50mm or 2" BBH

AXIAL SINGLE BORING BAR HOLDER

Part Number Description # of Tools Coolant Thru Ext Coolant Dimensions D0813810 Axial Single Boring Bar Holder 1 1/2" 1 X X Inch 1 1/2"0814000 Axial Single Boring Bar Holder 40mm 1 X X mm 40KIT 1003004 Plug & Seal Kit for 1 1/2" BBHKIT 1003003 Plug & Seal Kit for 40mm BBH



BMT55 STATICAXIAL SINGLE BORING BAR HOLDER 100mm INTERAXIS

Part Number Description # of Tools Reversible Coolant Thru Ext Coolant Dimensions DDWO 0393810 Axial Single Boring Bar Holder 1 1/2"

100mm Interaxis1 X X X Inch 1 1/2"

DWO 0394000 Axial Single Boring Bar Holder 40mm100mm Interaxis

1 X X X mm 40KIT 1000004 Plug for 1-1/2" BBHKIT 1000003 Plug for 40mm BBH

AXIAL 2 + 2 POSITION BORING BAR HOLDER

Part Number Description # of Tools Reversible Coolant Thru Ext Coolant Dimensions DDWO 0092540 Axial 2+2 Boring Bar Holder 1" 2 X X X Inch 1"DWO 0093175 Axial 2+2 Boring Bar Holder 1 1/4" 2 X X X Inch 1 1/4"DWO 0092500 Axial 2+2 Boring Bar Holder 25mm 2 X X X mm 25DWO 0093200 Axial 2+2 Boring Bar Holder 32mm 2 X X X mm 32KIT 1000006 Plug for 25mm or 1" BBHKIT 1000001 Plug for 32mm or 1 1/4" BBH



BMT55 STATICAXIAL 4 + 4 POSITION BORING BAR HOLDER

Part Number Description # of Tools Reversible Ext Coolant Dimensions D H0781905 Y AXIS 4+4 Position Boring Bar Holder

3/4"mm4 + 4 X X Inch 3/4" 1 7/8"

0782000 Y AXIS 4+4 Position Boring Bar Holder20mm

4 + 4 X X mm 20 48

TAILSTOCK FOR SUBSPINDLE

Part Number Description # of Tools D L0820100 Tailstock for Sub Spindle 38mm 1 38 1250820100L Tailstock for Sub Spindle 2" 1 2" 131.4



ACCESSORIESDRIVENPOLYGON MAKING MILL HEAD (2 INSERTS)

Part Number DescriptionP01Z20A100 2-Insert Polygon Making Head (with Inserts)TPGN220408 10 Inserts for Polygon Making Heads

POLYGON MAKING MILL HEAD (3 INSERTS)

Part Number DescriptionP01Z30A100 2-Insert Polygon Making Head (with Inserts)TPGN220408 10 Inserts for Polygon Making Heads



ER

COLL

ETS

: SET

S A

ND

IND

IVID

UA

L .

0002

" A

CCU

RACY

INCH

SIZE

SER

16St

anda

rdER

16Co

olan

tER

20St

anda

rdER

20Co

olan

tER

25St

anda

rdER

25Co

olan

tER

32St

anda

rdER

32Co

olan

tER

40St

anda

rdER

40Co

olan

t

3/6

4ER

16-0

01ER

20-0

01ER

25-0

01ER

32-0

01ER

40-0

01 1

/16

ER16

-002

ER20

-002

ER25

-002

ER32

-002

ER40

-002

5/6

4ER

16-0

03ER

20-0

03ER

25-0

03ER

32-0

03ER

40-0

03 3

/32

ER16

-004

ER20

-004

ER25

-004

ER32

-004

ER40

-004

7/6

4ER

16-0

05ER

20-0

05ER

25-0

05ER

32-0

05ER

40-0

05 1

/8ER

16-0

06ER

X16-

001

ER20

-006

ER20

X-00

1ER

25-0

06ER

25X-

001

ER32

-006

ER32

X-00

1ER

40-0

06 9

/64

ER16

-007

ERX1

6-00

2ER

20-0

07ER

25-0

07ER

32-0

07ER

40-0

07 5

/32

ER16

-008

ERX1

6-00

3ER

20-0

08ER

20X-

002

ER25

-008

ER25

X-00

2ER

32-0

08ER

32X-

002

ER40

-008

ERX4

0-00

1 1

1/64

ER16

-009

ERX1

6-00

4ER

20-0

09ER

25-0

09ER

32-0

09ER

40-0

09 3

/16

ER16

-010

ERX1

6-00

5ER

20-0

10ER

20X-

003

ER25

-010

ER25

X-00

3ER

32-0

10ER

32X-

003

ER40

-010

ERX4

0-00

2 1

3/64

ER16

-011

ERX1

6-00

6ER

20-0

11ER

25-0

11ER

32-0

11ER

40-0

11 7

/32

ER16

-012

ERX1

6-00

7ER

20-0

12ER

20X-

004

ER25

-012

ER25

X-00

4ER

32-0

12ER

32X-

004

ER40

-012

ERX4

0-00

3 1

5/64

ER16

-013

ERX1

6-00

8ER

20-0

13ER

25-0

13ER

32-0

13ER

40-0

13 1

/4ER

16-0

14ER

X16-

009

ER20

-014

ER20

X-00

5ER

25-0

14ER

25X-

005

ER32

-014

ER32

X-00

5ER

40-0

14ER

X40-

004

17/

64ER

16-0

15ER

X16-

010

ER20

-015

ER25

-015

ER32

-015

ER40

-015

9/3

2ER

16-0

16ER

X16-

011

ER20

-016

ER20

X-00

6ER

25-0

16ER

25X-

006

ER32

-016

ER32

X-00

6ER

40-0

16ER

X40-

005

19/

64ER

16-0

17ER

X16-

012

ER20

-017

ER25

-017

ER32

-017

ER40

-017

5/1

6ER

16-0

18ER

X16-

013

ER20

-018

ER20

X-00

7ER

25-0

18ER

25X-

007

ER32

-018

ER32

X-00

7ER

40-0

18ER

X40-

006

21/

64ER

16-0

19ER

X16-

014

ER20

-019

ER25

-019

ER32

-019

ER40

-019

11/

32ER

16-0

20ER

X16-

015

ER20

-020

ER20

-008

ER25

-020

ER25

X-00

8ER

32-0

20ER

32X-

008

ER40

-020

ERX4

0-00

7 2

3/64

ER16

-021

ERX1

6-01

6ER

20-0

21ER

25-0

21ER

32-0

21ER

40-0

21 3

/8ER

16-0

22ER

X16-

017

ER20

-022

ER20

-009

ER25

-022

ER25

X-00

9ER

32-0

22ER

32X-

009

ER40

-022

ERX4

0-00

8 2

5/64

ER16

-023

ERX1

6-01

8ER

20-0

23ER

25-0

23ER

32-0

23ER

40-0

23 1

3/32

ER20

-024

ER20

X-01

0ER

25-0

24ER

25X-

010

ER32

-024

ER32

X-01

0ER

40-0

24ER

X40-

009

27/

64ER

20-0

25ER

25-0

25ER

32-0

25ER

40-0

25 7

/16

ER20

-026

ER20

X-01

1ER

25-0

26ER

25X-

011

ER32

-026

ER32

X-01

1ER

40-0

26ER

X40-

010

29/

64ER

20-0

27ER

25-0

27ER

32-0

27ER

40-0

27 1

5/32

ER20

-028

ER20

X-01

2ER

25-0

28ER

25X-

012

ER32

-028

ER32

X-01

2ER

40-0

28ER

X40-

011

31/

64ER

20-0

29ER

25-0

29ER

32-0

29ER

40-0

29 1

/2ER

20-0

30ER

20X-

013

ER25

-030

ER25

X-01

3ER

32-0

30ER

32X-

013

ER40

-030

ERX4

0-01

2 3

3/64

ER25

-031

ER32

-031

ER40

-031

INCH

SIZE

SER

16St

anda

rdER

16Co

olan

tER

20St

anda

rdER

20Co

olan

tER

25St

anda

rdER

25Co

olan

tER

32St

anda

rdER

32Co

olan

tER

40St

anda

rdER

40Co

olan

t

17/

32ER

25-0

32ER

25X-

014

ER32

-032

ER32

X-01

4ER

40-0

32ER

X40-

013

35/

64ER

25-0

33ER

32-0

33ER

40-0

33 9

/16

ER25

-034

ER25

X-01

5ER

32-0

34ER

32X-

015

ER40

-034

ERX4

0-01

4 3

7/64

ER25

-035

ER32

-035

ER40

-035

19/

32ER

25-0

36ER

25X-

016

ER32

-036

ER32

X-01

6ER

40-0

36ER

X40-

015

39/

64ER

25-0

37ER

32-0

37ER

40-0

37 5

/8ER

25-0

38ER

25X-

017

ER32

-038

ER32

X-01

7ER

40-0

38ER

X40-

016

41/

64ER

32-0

39ER

40-0

39 2

1/32

ER32

-040

ER32

X-01

8ER

40-0

40ER

X40-

017

43/

64ER

32-0

41ER

40-0

41 1

1/16

ER32

-042

ER32

X-01

9ER

40-0

42ER

X40-

018

45/

64ER

32-0

43ER

40-0

43 2

3/32

ER32

-044

ER32

X-02

0ER

40-0

44ER

X40-

019

47/

64ER

32-0

45ER

40-0

45 3

/4ER

32-0

46ER

32X-

021

ER40

-046

ERX4

0-02

0 4

9/64

ER32

-047

ER40

-047

25/

32ER

32-0

48ER

32X-

022

ER40

-048

ERX4

0-02

1 5

1/64

ER32

-049

ER40

-049

13/

16ER

32-0

50ER

40-0

50ER

X40-

022

53/

64ER

40-0

51 2

7/32

ER40

-052

ERX4

0-02

3 5

5/64

ER40

-053

7/8

ER40

-054

ERX4

0-02

4 5

7/64

ER40

-055

29/

32ER

40-0

56ER

X40-

025

59/

64ER

40-0

57 1

5/16

ER40

-058

ERX4

0-02

6 6

1/64

ER40

-059

31/

32ER

40-0

60ER

X40-

027

63/

64ER

40-0

61 1

"ER

40-0

62ER

X40-

028

1-1

/64

ER40

-063

SET

ER16

-SET

ERX1

6-SE

TER

20-S

ETER

X20-

SET

ER25

-SET

ERX2

5-SE

TER

32-S

ETER

X32-

SET

ER40

-SET

ERX4

0-SE

T

ER COLLETS

ER COLLET NUMBER DESCRIPTION MD LIST PRICE

ER16-001 thru ER16-023 ER16 Collet 15.00$ ER16-SET ER16 Collet Set (11 Collets) 150.00$

ERX16-001 thru ERX16-018 ER16 Sealed Collet 25.00$ ERX16-SET ER16 Sealed Collet Set (9 Collets) 220.00$









LIVE TOOL WRENCHES

ER COLLET NUMBER DESCRIPTION MD LIST PRICE

From Catalog Above ER Collet Wrench (Identify Holder) 22.00$

From Catalog AboveSpindle Locking Wrench

(Identify Holder) 22.00$

010270225 Radial ER25 BMT55 Coolant Thru*10271025 Radial ERA25 BMT55 Coolant Thru*10271617 Milling Head D=16mm, L=17mm10272219 Milling Head D=22mm, L=19mm10272232 Radial ER32 BMT5510272332 Radial ER32 BMT55 Coolant Thru*40310022 Weldon 20 H=60mm40310825 Axial ER25 H=60mm40311025 Axial ER25 Coolant Thru* H=60mm40311032 Axial ER32 Coolant Thru* H=60mm40311432 Axial ER32 H=60mm

100311616 Double Outlet ER16/ER16 H=60mm40311617 Milling Head D=16mm, L=17mm H=60mm

100311625 Double Outlet ER25/ER16 H=60mm40312219 Milling Head D=22mm, L=19mm H=60mm40312240 Milling Head D=22mm, L=40mm H=60mm40312721 Milling Head D=27mm, L=21mm H=60mm40312733 Milling Head D=27mm, L=33mm H=60mm40312750 Milling Head D=27mm, L=50mm H=60mm90319108 Internal Polygon-Making Weldon 8 H=60mm90319110 Internal Polygon-Making Weldon 10 H=60mm90319112 Internal Polygon-Making Weldon 12 H=60mm90319116 Internal Polygon-Making Weldon 16 H=60mm90319125 Internal Polygon-Making ER25 H=60mm

120360020 0-90 Adj Angle ER20 Driven Tool120360025 0-90 Adj Angle ER25 Driven Tool120361617 0-90 Adj Angle Milling Head D=16mm L=17mm120361905 0-90 Adj Angle Milling Head D=3/4" L=3/4"120362219 0-90 Adj Angle Milling Head D=22mm L=19mm140621100 Gear Hobber 1:1140622100 Geared-Down Gear Hobber 2:1

60630025 ER25 Standard Rear-Set H=78mm100632525 Off-Set Double Outlet ERA25/ERA25 H=70mm

10720016 Milling Head D=16mm, L=17mm Redirected10720022 Milling Head D=22mm, L=19mm Redirected10720025 ER25 Redirected10720027 Milling Head D=27mm, L=21mm Redirected10720032 Radial ER32 Redirected20721225 Geared-Up 1:2 ER25 Redirected20722116 Geared-Down Milling Head D=16mm, L=17mm

Redirected20722122 Geared-Down Milling Head D=22mm, L=19mm

Redirected20722127 Geared-Down Milling Head D=27mm, L=21mm

Redirected20722132 Geared-Down 2:1 ER32 Redirected30730016X2 Y AXIS Double Outlet ER1630730025X2 Y AXIS Double Outlet ER25

160762500 Y AXIS Radial Double Rev. Double-Side Tool:25mm

160762540 Y AXIS Radial Double Rev. Double-Side Tool:1"

160772500 Y AXIS Radial Double Rev. Single-Side Tool:25mm

160772540 Y AXIS Radial Double Rev. Single-Side Tool:1"

190781905 Y AXIS 4+4 Position Boring Bar Holder 3/4"mm190782000 Y AXIS 4+4 Position Boring Bar Holder 20mm170813810 Axial Single Boring Bar Holder 1 1/2"170814000 Axial Single Boring Bar Holder 40mm190820100 Tailstock for Sub Spindle 38mm190820100L Tailstock for Sub Spindle 2"

70891225 Geared-Up 1:2 ER25 H=60mm70891325 Geared-Up 1:2 ER25 H=60mm Coolant Thru*70892425 Geared-Up 1:2 ER25 H=85mm70892525 Geared-Up 1:2 ER25 H=85mm Coolant Thru*70893625 Geared-Up 1:2 ER25 H=70mm70893725 Geared-Up 1:2 ER25 H=70mm Coolant Thru*

B16BLADEKIT Blade Kit: 1 Blade, 10 Inserts for Tool 0730132

D

D6DWO 0020022 Weldon 20 H=85mm6DWO 0020125 Axial ER25 H=85mm6DWO 0020132 Axial ER32 H=85mm6DWO 0020225 Axial ER25 H=85mm Coolant Thru*6DWO 0020232 Axial ER32 H=85mm Coolant Thru*

10DWO 0021616 Double Outlet ER16/ER16 H=85mm6DWO 0021617 Milling Head D=16mm, L=17mm H=85mm6DWO 0022219 Milling Head D=22mm, L=19mm H=85mm6DWO 0022240 Milling Head D=22mm, L=40mm H=85mm

10DWO 0022516 Double Outlet ER25/ER16 H=85mm6DWO 0022721 Milling Head D=27mm, L=21mm H=85mm6DWO 0022733 Milling Head D=27mm, L=33mm H=85mm6DWO 0022750 Milling Head D=27mm, L=50mm H=85mm9DWO 0029108 Internal Polygon-Making Weldon 8 H=85mm9DWO 0029110 Internal Polygon-Making Weldon 10 H=85mm9DWO 0029112 Internal Polygon-Making Weldon 12 H=85mm9DWO 0029116 Internal Polygon-Making Weldon 16 H=85mm9DWO 0029125 Internal Polygon-Making ER25 H=85mm

15DWO 0051108 Radial Gear Hobber 1:1 D=8mm15DWO 0051110 Radial Gear Hobber 1:1 D=10mm15DWO 0051113 Radial Gear Hobber 1:1 D=13mm15DWO 0051116 Radial Gear Hobber 1:1 D=16mm10DWO 0080125 Double Outlet ER25/ER25 H=60mm10DWO 0080132 Double Outlet ER32/ER32 H=60mm10DWO 0080225 Double Outlet ER25/ER25 H=85mm10DWO 0080232 Double Outlet ER32/ER32 H=85mm10DWO 0080325 Double Outlet ER25/ER25 H=70mm10DWO 0080332 Double Outlet ER32/ER32 H=70mm18DWO 0092500 Axial 2+2 Boring Bar Holder 25mm18DWO 0092540 Axial 2+2 Boring Bar Holder 1"18DWO 0093175 Axial 2+2 Boring Bar Holder 1 1/4"18DWO 0093200 Axial 2+2 Boring Bar Holder 32mm11DWO 0100216 Y AXIS Double Outlet ER16 H=60mm11DWO 0100225 Y AXIS Double Outlet ER25 H=60mm11DWO 0101216 Y AXIS Double Outlet ER16 H=85mm11DWO 0101225 Y AXIS Double Outlet ER25 H=85mm11DWO 0102216 Y AXIS Double Outlet ER16 H=70mm11DWO 0102225 Y AXIS Double Outlet ER25 H=70mm

8DWO 0190111 Geared-Up 1:5.8 ER11 Coolant Thru*H=60mm

8DWO 0190116 Geared-Up 1:5.8 ER16 H=60mm8DWO 0190211 Geared-Up 1:5.8 ER11 Coolant Thru*

H=85mm8DWO 0190216 Geared-Up 1:5.8 ER16 H=85mm8DWO 0190311 Geared-Up 1:5.8 ER11 Coolant Thru*

H=70mm 8DWO 0190316 Geared-Up 1:5.8 ER16 H=70mm5DWO 0240022 Weldon 20 H=70mm5DWO 0240125 ER25 Standard H=70mm5DWO 0240132 ER32 Standard H=70mm5DWO 0240225 ER25 H=70mm Coolant Thru*5DWO 0240232 ER32 H=70mm Coolant Thru*

10DWO 0241616 Double Outlet ER16/ER16 H=70mm5DWO 0241617 Milling Head D=16mm, L=17mm H=70mm5DWO 0242219 Milling Head D=22mm, L=19mm H=70mm5DWO 0242240 Milling Head D=22mm, L=40mm H=70mm

10DWO 0242516 Double Outlet ER25/ER16 H=70mm5DWO 0242721 Milling Head D=27mm, L=21mm H=70mm5DWO 0242733 Milling Head D=27mm, L=33mm H=70mm5DWO 0242750 Milling Head D=27mm, L=50mm H=70mm9DWO 0249108 Internal Polygon-Making Weldon 8 H=70mm9DWO 0249110 Internal Polygon-Making Weldon 10 H=70mm9DWO 0249112 Internal Polygon-Making Weldon 12 H=70mm9DWO 0249116 Internal Polygon-Making Weldon 16 H=70mm9DWO 0249125 Internal Polygon-Making ER25 H=70mm

18DWO 0393810 Axial Single Boring Bar Holder 1 1/2" 100mmInteraxis

18DWO 0394000 Axial Single Boring Bar Holder 40mm 100mmInteraxis

17DWO 0422500 Axial Static Tool 25mm x 25mm17DWO 0422540 Axial Static Tool 1" x 1"

3DWO 0600111 Geared-Up 1:5.625 ER113DWO 0600116 Geared-Up 1:5.625 ER16

Table of ContentsPart Number Index

3DWO 0600116 Geared-Up 1:5.625 ER1612DWO 0660120 0-180 Adj.Angle ERA20 H=47.5mm12DWO 0660220 0-180 Adj.Angle ERA20 H=47.5mm, Coolant

Thru*13DWO 0660316 0-180 Adj.Angle Geared-Up 1:2 H=47.5mm13DWO 0660416 0-180 Adj.Angle Geared-Up 1:2 H=47.5mm,

Coolant Thru*13DWO 0661120 0-180 Adj.Angle ERA20 H=83mm13DWO 0661220 0-180 Adj.Angle ERA20 H=83mm, Coolant

Thru*14DWO 0661316 0-180 Adj.Angle Geared-Up 1:2 H=83mm14DWO 0661416 0-180 Adj.Angle Geared-Up 1:2 H=83mm,

Coolant Thru*16DWO 0730132 Radial Blade Holder

1DWO 0900325 Radial ERA25 BMT5515DWO 0930300 Driven Toolholder for Sliding Steady Rest Size

115DWO 0930300A Driven Toolholder for Sliding Steady Rest Size

1 with BlueTooth11DWO 0950216 Geared-Up 1:2 ER16 H=60 Single Side Twin

Head in Y11DWO 0950225 Geared-Up 1:2 ER25 H=60 Single Side Twin





Head in Y15DWO 1030100 Broaching/Slotting Tool17DWO 1115000 Single Boring Bar Holder 50mm H=100mm17DWO 1115080 Single Boring Bar Holder 2" H=100mm

K18KIT 1000001 Plug for 32mm or 1 1/4" BBH17KIT 1000002 Plug for 50mm or 2" BBH18KIT 1000003 Plug for 40mm BBH 18KIT 1000004 Plug for 1-1/2" BBH18KIT 1000006 Plug for 25mm or 1" BBH17KIT 1003003 Plug & Seal Kit for 40mm BBH17KIT 1003004 Plug & Seal Kit for 1 1/2" BBH

P20P01Z20A100 2-Insert Polygon Making Head (with Inserts)20P01Z30A100 2-Insert Polygon Making Head (with Inserts)

T20TPGN220408 10 Inserts for Polygon Making Heads20TPGN220408 10 Inserts for Polygon Making Heads

Table of ContentsPart Number Index

00-180 ADJUSTABLE ANGLE DRIVEN TOOL 120-180 ADJUSTABLE ANGLE DRIVEN TOOL H=83 130-180 ADJUSTABLE ANGLE GEARED-UP DRIVEN TOOL H=47.5mm 130-180 ADJUSTABLE ANGLE GEARED-UP DRIVEN TOOL H=83 140-90 ADJUSTABLE ANGLE DRIVEN TOOL 12

AACCESSORIES 20AXIAL 2 + 2 POSITION BORING BAR HOLDER 18AXIAL 4 + 4 POSITION BORING BAR HOLDER 19AXIAL DRIVEN TOOL FOR INTERNAL POLYGON MAKING 9AXIAL DRIVEN TOOL H=60mm 4AXIAL DRIVEN TOOL H=70mm 5AXIAL DRIVEN TOOL H=85mm 6AXIAL GEARED-UP 1:2 SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y 11AXIAL GEARED-UP DRIVEN TOOL I=1:2 7AXIAL GEARED-UP DRIVEN TOOL I=1:5.625 8AXIAL OPPOSITE FACE DRIVEN TOOL 10AXIAL OPPOSITE FACE DRIVEN TOOL REAR SET 10AXIAL REAR-SET DRIVEN TOOL 6AXIAL SINGLE BORING BAR HOLDER 17AXIAL SINGLE BORING BAR HOLDER 100mm INTERAXIS 18AXIAL SINGLE BORING BAR HOLDER 50mm/2" H=100mm 17AXIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL 11AXIAL STATIC TOOL 17

BBMT55 1-19BROACHING/SLOTTING TOOL 15

DDRIVEN 1-15, 20DRIVEN TOOLHOLDER FOR STEADY REST - SIZE 1 15

GGEAR HOBBER 14GEAR HOBBER - RADIAL DRIVEN 15GEARED-DOWN RADIAL RE-DIRECTED DRIVEN TOOL 2GEARED-UP RADIAL RE-DIRECTED DRIVEN TOOL 2

PPOLYGON MAKING MILL HEAD (2 INSERTS) 20POLYGON MAKING MILL HEAD (3 INSERTS) 20

RRADIAL BLADE HOLDER - WITH BLADES 16RADIAL DOUBLE SIDE TWIN STATIC TOOL 16RADIAL DRIVEN TOOL 1RADIAL DRIVEN TOOL RE-DIRECTED IN Z BY 36mm DRIVEN TOOL 1RADIAL GEARED-UP DRIVEN TOOL I=1:5625 3RADIAL REVERSIBLE SINGLE SIDE TWIN STATIC TOOL 16RADIAL SINGLE-SIDE TWIN HEAD DRIVEN TOOL IN Y-AXIS 3

SSee Accessories for Polygon Making Mill Heads 9STATIC 16-19

TTAILSTOCK FOR SUBSPINDLE 19

Table of ContentsAlphabetized Listing

Documents

DRIVEN and STATIC TOOLING DOOSAN BMT55 · driven and static tooling for doosan bmt55 10139 bergin rd. howell, mi 48843 phone : 877-91-tools ( 810-632-4446 ) fax: 877-92-tools ( 810-632-4467