Drive-On Benches CRS4600-DO Bench The UnoLiner CRS4600-DO Bench is a perfect blend between the smaller CRS4000-DO and larger CRS5500-DO. This drive-on straightening bench boasts a frame bench length of 4.6 meters and is suitable for the L30 and L36 lift, oﬀering its user a choice between a lifting capacity of 3000 kg and 3600kg. It is ideal for repairing and restoring cars of all sizes, crossovers, MPVs, SUVs, pickup trucks, all-terrain vehicles, and light commercial vehicles. The CRS4600- DO is an excellent straightening, alignment, and collision repair bench, which can also be used as a multifunctional vehicle maintenance and general repair worksite. Features Low base height of 14 cm Mechanical and hydraulic safety systems 60 or 100 cm drive-on ramps 3 or 3.6 ton lifting capacity Multiple-angle 10-ton pulling ability Interchangeable UnoLiner accessories Technical data Bench Frame length 4610 mm Bench Frame width 1060-1160 mm Min. bench height 140 mm Max. bench height 1300 mm Max. load weight 3000-3600 kg Total length 5170 mm Total width including DO Ramps 1876 mm 4 - www.unoliner.com

Drive-On Benches CRS4600-DO Bench · Mechanical and hydraulic safety systems 60 or 100 cm drive-on ramps 3 or 3.6 ton lifting capacity Multiple-angle 10-ton pulling ability Interchangeable

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

Drive-On Benches

CRS4600-DO Bench

The UnoLiner CRS4600-DO Bench is a perfect blend between the smaller CRS4000-DO and larger CRS5500-DO. Thisdrive-on straightening bench boasts a frame bench length of 4.6 meters and is suitable for the L30 and L36 lift,offering its user a choice between a lifting capacity of 3000 kg and 3600kg. It is ideal for repairing and restoring carsof all sizes, crossovers, MPVs, SUVs, pickup trucks, all-terrain vehicles, and light commercial vehicles. The CRS4600-DO is an excellent straightening, alignment, and collision repair bench, which can also be used as a multifunctionalvehicle maintenance and general repair worksite.

Features

Low base height of 14 cm Mechanical and hydraulic safety systems 60 or 100 cm drive-on ramps 3 or 3.6 ton lifting capacity Multiple-angle 10-ton pulling ability Interchangeable UnoLiner accessories

Technical data

Bench Frame length 4610 mmBench Frame width 1060-1160 mmMin. bench height 140 mmMax. bench height 1300 mmMax. load weight 3000-3600 kgTotal length 5170 mmTotal width including DO Ramps 1876 mm

4 - www.unoliner.com