Upload
jasio-wiesio
View
228
Download
27
Tags:
Embed Size (px)
Citation preview
Full Size Rig Floor Drilling and Well Control
Simulator
Configurator
2010
Document Name: DrillSIM_5000_Classic_Configurator_Apr_2010_v10.DOC
Issue: 10: Revision: 1.0
Date: 23rd April 2010
Drilling Systems (UK) Ltd Hurn View House, 5 Aviation Park West, Bournemouth International Airport, Dorset, BH23 6EW, UK
Tel : +44 1202 582255 Fax : +44 1202 582288 Email : [email protected] Web : www.drillingsystems.com
CONFIDENTIAL
This Document is confidential to Drilling Systems and the Customer. Neither the whole nor any part of this document may be disclosed to any third party without the prior written consent of Drilling Systems, Hurn View House, 5 Aviation Park West, Bournemouth International Airport, Dorset, BH23 6EW United Kingdom. The copyright of this document is vested in Drilling Systems. All rights reserved. Neither the whole nor part of this document may be reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the copyright owner.
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Please complete the following information about your Company and Contact details, then review the checklist below, selecting the options required. Once complete, please sign and fax back to the Sales and Marketing Department on +44 1202 582288.
Company Information
Company Name
Company Address
Country
Telephone Number
Fax Number
Website
Contact Name
Position/Job Title
Direct Tel Number
Email Address
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Ref Tech Prop
Description Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
A Base Supply
A1 3.1 Drilling Controls Console √
A2 3.2
Drilling Gauges Console with VDU Data Logger Select Scale below,
√
A2a Weight on Bit Scale: 8 Lines
A2b Weight on Bit Scale: 10 Lines
A3 3.3 Remote (Swaco) Choke Console √
A4 Surface BOP Console Select one from options below
√
A4a 3.4 Surface BOP Console (Air) (Koomey)
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Ref Tech Prop
Description Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
A4b Surface BOP Console (Electric) (Shaffer)
A4c Surface BOP Console (Electric) (Koomey)
A5 3.5 Full Size, Steel, Standpipe Manifold (Vertical)
√
A6 3.6 Full Size, Steel, Choke Manifold (Vertical)
√
A7 Graphics Packages – Select one option √
A7a
A single 40” LCD mounted on top of the drilling gauges. Not capable of running new multi-channel advanced 3D graphics
A7bi
A triple 40” LCD framework, that supports the new advanced 3D graphics software. Also includes the Driller’s Support Station.
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Ref Tech Prop
Description Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
A7c
Driller’s Support Station (via 19” LCD) Provided with the advanced 3D Graphics option (A7b)
A7d
3D Surface Graphics Provided as standard with the advanced 3D Graphics Hardware option (A7b)
A7e 3D Downhole Graphics
A8 Computer Equipment √
A9 DrillSIM Software √
B Additional Equipment for Top Drive Operations
B1 3.1 Top Drive Console for Drilling Controls Console
C Additional Equipment for Offshore Operations
C1 4.1.3 Motion Compensator.
C2b 4.1.1 Subsea BOP (Deepwater)
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Ref Tech Prop
Description Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
C3a 4.1.2 Subsea Diverter (Design #1)
C3b 4.1.2 Subsea Diverter (Design #2)
C4 Kill Line Pressure Gauge (8PA) (on stand)
Ref Tech Prop
Description Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
D Additional Equipment for Land Operations
D1 4.2.1 Surface Diverter (Land/Platform/Jackup Operations)
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Ref Tech Prop
Description Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
E Additional Equipment for Cementing Operations
E1 4.4 Full Size 9-5/8” Cement Head complete with plugs
E2A 4.4 Standard Cement Pumpers Console
E2B
Advanced Cement Pumpers Console (Based on a Schlumberger 361* Skid Unit) * Mark of Schlumberger
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Ref Tech Prop
Description Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
F Additional Full Size
Equipment for Workover Operations
F1A 4.3.2 Y-Block Well Head
F1B 4.3.2 Dual Completion Well Head
F1C 4.3.2 Single Completion Well Head
F2A 4.3.3
Horizontal Workover Manifold (typical for Onshore Operations)
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Ref Tech Prop
Description Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
F2B 4.3.3 Vertical Workover Manifold (Typical for Offshore Operations)
F3 4.3.4 Workover Pumpers Console
F4 4.3.1 Well Services BOP
Ref Tech Prop
Description Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
G Additional Mimic
Equipment for Workover Operations
G1
Workover Mimic Panel Note: Where space is limited, this Mimic panel represents the basic workover controls.
Ref Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
P Power Requirements
P1 240 V 220-240v, 32 Amps, 50 Hz
P2 110 v 110-120v, 60 Amps, 60 Hz
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Ref Description
Customer Selection
Please Tick (√)
Drilling Systems
(Use Only)
S Scale Information
S1A
Pressure Gauge Scales
Dual: psi and kPa (Standard)
S1B Dual: psi and kg/cm2
S1C Dual: psi and bar
S2A Torque Gauge Scales
Dual: ft-Lbs and Nm (Standard)
S2B Dual: ft-Lbs and Kg/m
S3A Weight Gauge Scales
Dual: Lbs and Kgs (Standard)
S3B Dual Lbs and daN
S4A Volume Gauge Scales Dual: Bbls and m3 √
S5A Temperature Gauge Scales Dual: Deg C and Deg F √
Ref Question Customers Response
Drilling Systems
(Use Only)
X Access
Please be aware of the size and weight of the simulator components (see Appendix 1 of this document) and answer the following questions
X1 Please confirm the suitability of access into the building
X2 Please confirm the suitability of access through the building
X3 Please confirm the suitability of access into the simulator room
X4
Our Installation Engineers often work outside of standard office hours, ie into the evenings and at weekends. Please confirm if this level of access is available.
X5
Does the Installation Site adopt any special procedures for third-party contractors, i.e. Permit to Work, Security Clearances, Photo ID etc?
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Y Room Aspects
Y1 Please confirm the suitability of the room floor to take the weight of the units selected.
Y2 Please confirm the suitability of the room floor to take the height of the units selected.
Y3
Please provide the dimensions of the simulator room (with digital photographs if available). On receipt, we will confirm the space requirement and provide a provisional layout for the components selected that will meet industry certification standards. If possible, please provide a quick sketch of the room identifying any features which may obstruct or be concealed by the simulator installation, for example doors and windows, emergency exits & equipment, power points, ventilation controls etc.
Z Room Provisions
To provide a high level of remote support and future upgrades, Drilling Systems requires either of the following, so please confirm their availability:-
Z1 VPN (Virtual Private Network)
Z2 Direct Dial Modem Line (i.e. not through a central switchboard)
Additional Comments by the Customer
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
Configuration on behalf of the Customer. Company Name
Name
Position
Signed Date
Accepted on behalf of Drilling Systems (UK) Limited: (Manufacturing) Name
Position
Signed
Date
Notes by Drilling Systems
DrillSIM-5000 Classic Configurator To: Sales & MarketingFax: +44 (0) 1202 582288
DrillSIM-5000 Classic Configurator © 2010 Drilling Systems Ltd
APPENDIX 1 – Weights and Dimensions of Simulator Components