Embed Size (px)
Citation preview
INNOVATIVE DRILLING & TOOL SOLUTIONS
Drilling The most comprehensive choice forInnovative drilling solutions
Hi-Speed Masonry Core Drills for speed and accuracy
Rebar Cutter the solution to drilling Rebar
HSS Split Point for enhanced drilling
Wood Beaver - Next generation wood drill
SDS Plus Cross Head for smoother drilling action
www.armeg.co.uk
TM TM TM
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 2
INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
Introducing the Drilling Solutions Range from Armeg.
A comprehensive range of drilling products that covers hammer,
rotary and percussion drill bits.
Products incorporate innovative
head designs that maximise speed, performance,
strength and therefore long tool life.
DrillingInnovative Drilling Solutions
Masonry / Wood / Metal
2
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 3
4-16Masonry
SDS Plus QFDS Hammer Drills, SDS Plus Cross Heads,
a-line SDS Plus Hammer Drills, Rebar Cutters,
SDS Max Hammer Drills, Professional Masonry Drills,
Standard Masonrys, Threaded Shank Masonry Drills,
Hi-Speed Masonry Core Drills, Professional Masonry Core Drills,
Dry Diamond Core Drills, Points and Chisels, A & K Taper,
Drill Holders, Adaptors & SDS Plus Accessories
3
19-2317-19Wood
Wood Beaver next generation Wood Drill,
Super Wood Drill for large diameters,
Hexagon & SDS Plus Wood Augers, Brad Points
& Flat Wood Drills
Metal
LDX Metal Cutters, Screw Extractors,
HSS Split Points, HSS Twist Drills,
Blacksmith Drills, Holesaws & Step Drills
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 4
Size and Description Part No.
15.0 x 150mm SDS Plus Hammer Drill S15.0X150
16.0 x 150mm SDS Plus Hammer Drill S16.0X150
14.0 x 200mm SDS Plus Hammer Drill S14.0X200
16.0 x 200mm SDS Plus Hammer Drill S16.0X200
18.0 x 200mm SDS Plus Hammer Drill S18.0X200
20.0 x 200mm SDS Plus Hammer Drill S20.0X200
5.0 x 210mm SDS Plus Hammer Drill S05.0X210
5.5 x 210mm SDS Plus Hammer Drill S05.5X210
6.0 x 210mm SDS Plus Hammer Drill S06.0X210
6.5 x 210mm SDS Plus Hammer Drill S06.5X210
7.0 x 210mm SDS Plus Hammer Drill S07.0X210
8.0 x 210mm SDS Plus Hammer Drill S08.0X210
9.0 x 210mm SDS Plus Hammer Drill S09.0X210
10.0 x 210mm SDS Plus Hammer Drill S10.0X210
12.0 x 210mm SDS Plus Hammer Drill S12.0X210
6.5 x 250mm SDS Plus Hammer Drill S6.5X250
12.0 x 250mm SDS Plus Hammer Drill S12.0X250
13.0 x 250mm SDS Plus Hammer Drill S13.0X250
14.0 x 250mm SDS Plus Hammer Drill S14.0X250
15.0 x 250mm SDS Plus Hammer Drill S15.0X250
16.0 x 250mm SDS Plus Hammer Drill S16.0X250
18.0 x 250mm SDS Plus Hammer Drill S18.0X250
20.0 x 250mm SDS Plus Hammer Drill S20.0X250
22.0 x 250mm SDS Plus Hammer Drill S22.0X250
24.0 x 250mm SDS Plus Hammer Drill S24.0X250
25.0 x 250mm SDS Plus Hammer Drill S25.0X250
26.0 x 250mm SDS Plus Hammer Drill S26.0X250
5.5 x 260mm SDS Plus Hammer Drill S05.5X260
6.0 x 260mm SDS Plus Hammer Drill S06.0X260
8.0 x 260mm SDS Plus Hammer Drill S08.0X260
10.0 x 260mm SDS Plus Hammer Drill S10.0X260
11.0 x 260mm SDS Plus Hammer Drill S11.0X260
12.0 x 300mm SDS Plus Hammer Drill S12.0X300
13.0 x 300mm SDS Plus Hammer Drill S13.0X300
14.0 x 300mm SDS Plus Hammer Drill S14.0X300
Size and Description Part No.
Size and Description Part No.
4.0 x 110mm SDS Plus Hammer Drill S04.0X110
5.0 x 110mm SDS Plus Hammer Drill S05.0X110
5.5 x 110mm SDS Plus Hammer Drill S05.5X110
6.0 x 110mm SDS Plus Hammer Drill S06.0X110
6.5 x 110mm SDS Plus Hammer Drill S06.5X110
7.0 x 110mm SDS Plus Hammer Drill S07.0X110
8.0 x 110mm SDS Plus Hammer Drill S08.0X110
10.0 x 110mm SDS Plus Hammer Drill S10.0X110
4.0 x 160mm SDS Plus Hammer Drill S04.0X160
5.0 x 160mm SDS Plus Hammer Drill S05.0X160
5.5 x 160mm SDS Plus Hammer Drill S05.5X160
6.0 x 160mm SDS Plus Hammer Drill S06.0X160
6.5 x 160mm SDS Plus Hammer Drill S06.5X160
7.0 x 160mm SDS Plus Hammer Drill S07.0X160
8.0 x 160mm SDS Plus Hammer Drill S08.0X160
9.0 x 160mm SDS Plus Hammer Drill S09.0X160
10.0 x 160mm SDS Plus Hammer Drill S10.0X160
11.0 x 160mm SDS Plus Hammer Drill S11.0X160
12.0 x 160mm SDS Plus Hammer Drill S12.0X160
13.0 x 150mm SDS Plus Hammer Drill S13.0X150
14.0 x 150mm SDS Plus Hammer Drill S14.0X150
SDS Plus Premium-Line SDS Plus Hammer Drill Bits
4INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
The Evolution of SDS Plus Hammer Drilling
• Latest carbide tip technology - increased penetration and efficiency of cut.
• Ideal for cordless drills with increased number of holes per battery charge.
• Grade of carbide ensures extended tool life and number of holes drilled.
• Clean and accurate holes in multiple material types.
• Proven flute geometries enable maximum spoil removal.
• Combination of flute and tip geometry produces truer and rounder holes.
• Copper brazed with optimum tip support.
• High impact point of sale units available.
Armeg’s Premium-Line QFDS Hammer Drills with Evo tip technology are theonly UK manufactured SDS Plus Hammer Drill Bits available on the market.
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 5
Size and Description Part No.
10 X 5.0 x 160mm SDS Plus Hammer Drill STP05.0X160
10 X 5.5 x 160mm SDS Plus Hammer Drill STP05.5X160
10 X 6.0 x 160mm SDS Plus Hammer Drill STP06.0X160
10 X 6.5 x 160mm SDS Plus Hammer Drill STP06.5X160
10 X 7.0 x 160mm SDS Plus Hammer Drill STP07.0X160
10 X 8.0 x 160mm SDS Plus Hammer Drill STP08.0X160
10 X 10.0 x 160mm SDS Plus Hammer Drill STP10.0X160
Size and Description Part No.
1 X 5.0, 5.5, 6.0 x 110mm
1 X 5.5, 6.0, 7.0, 8.0 x 160mm SMP7MET
1 X 5.0, 5.5, 6.0 x 110mm
1 X 6.0, 6.5, 7.0, 8.0, 10.0 x 160mm SMP8WAL
1 X 5.0, 5.5, 6.0, 6.5, 7.0, 8.0, 10.0 x 160mm SMP7DAD
1 X 5.5, 6.0, 7.0, 8.0, 10.0 x 160mm SMP160
Size and Description Part No.
16.0 x 250mm SDS Plus Cross Head 9SX16.0X250
18.0 x 250mm SDS Plus Cross Head 9SX18.0X250
20.0 x 250mm SDS Plus Cross Head 9SX20.0X250
22.0 x 250mm SDS Plus Cross Head 9SX22.0X250
24.0 x 250mm SDS Plus Cross Head 9SX24.0X250
25.0 x 250mm SDS Plus Cross Head 9SX25.0X250
28.0 x 250mm SDS Plus Cross Head 9SX28.0X250
16.0 x 450mm SDS Plus Cross Head 9SX16.0X450
18.0 x 450mm SDS Plus Cross Head 9SX18.0X450
20.0 x 450mm SDS Plus Cross Head 9SX20.0X450
22.0 x 450mm SDS Plus Cross Head 9SX22.0X450
24.0 x 450mm SDS Plus Cross Head 9SX24.0X450
25.0 x 450mm SDS Plus Cross Head 9SX25.0X450
28.0 x 450mm SDS Plus Cross Head 9SX28.0X450
Size and Description Part No.
16.0 x 300mm SDS Plus Hammer Drill S16.0X300
18.0 x 300mm SDS Plus Hammer Drill S18.0X300
20.0 x 300mm SDS Plus Hammer Drill S20.0X300
5.0 x 310mm SDS Plus Hammer Drill S05.0X310
10.0 x 310mm SDS Plus Hammer Drill S10.0X310
11.0 x 310mm SDS Plus Hammer Drill S11.0X310
10.0 x 360mm SDS Plus Hammer Drill S10.0X360
6.5 x 400mm SDS Plus Hammer Drill S06.5X400
5.5 x 450mm SDS Plus Hammer Drill S05.5X450
6.0 x 450mm SDS Plus Hammer Drill S06.0X450
8.0 x 450mm SDS Plus Hammer Drill S08.0X450
10.0 x 450mm SDS Plus Hammer Drill S10.0X450
12.0 x 450mm SDS Plus Hammer Drill S12.0X450
13.0 x 450mm SDS Plus Hammer Drill S13.0X450
14.0 x 450mm SDS Plus Hammer Drill S14.0X450
15.0 x 450mm SDS Plus Hammer Drill S15.0X450
16.0 x 450mm SDS Plus Hammer Drill S16.0X450
18.0 x 450mm SDS Plus Hammer Drill S18.0X450
20.0 x 450mm SDS Plus Hammer Drill S20.0X450
22.0 x 450mm SDS Plus Hammer Drill S22.0X450
24.0 x 450mm SDS Plus Hammer Drill S24.0X450
25.0 x 450mm SDS Plus Hammer Drill S25.0X450
26.0 x 450mm SDS Plus Hammer Drill S26.0X450
28.0 x 450mm SDS Plus Hammer Drill S28.0X450
30.0 x 450mm SDS Plus Hammer Drill S30.0X450
8.0 x 600mm SDS Plus Hammer Drill S08.0X600
10.0 x 600mm SDS Plus Hammer Drill S10.0X600
12.0 x 600mm SDS Plus Hammer Drill S12.0X600
14.0 x 600mm SDS Plus Hammer Drill S14.0X600
16.0 x 600mm SDS Plus Hammer Drill S16.0X600
18.0 x 600mm SDS Plus Hammer Drill S18.0X600
20.0 x 600mm SDS Plus Hammer Drill S20.0X600
22.0 x 600mm SDS Plus Hammer Drill S22.0X600
25.0 x 600mm SDS Plus Hammer Drill S25.0X600
16.0 x 800mm SDS Plus Hammer Drill S16.0X800
10.0 x 1000mm SDS Plus Hammer Drill S10.0X1000
12.0 x 1000mm SDS Plus Hammer Drill S12.0X1000
14.0 x 1000mm SDS Plus Hammer Drill S14.0X1000
16.0 x 1000mm SDS Plus Hammer Drill S16.0X1000
18.0 x 1000mm SDS Plus Hammer Drill S18.0X1000
20.0 x 1000mm SDS Plus Hammer Drill S20.0X1000
22.0 x 1000mm SDS Plus Hammer Drill S22.0X1000
25.0 x 1000mm SDS Plus Hammer Drill S25.0X1000
5
SDS PLUS TEN PACKS
SDS PLUS SETS
SDS Plus Cross HeadSDS Plus Cross Head Hammer Drill Bits
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 6
Size and Description Part No.
18.0 x 260mm SDS Plus Hammer Drill ALS18.0X260
20.0 x 260mm SDS Plus Hammer Drill ALS20.0X260
10.0 x 310mm SDS Plus Hammer Drill ALS10.0X310
11.0 x 310mm SDS Plus Hammer Drill ALS11.0X310
12.0 x 310mm SDS Plus Hammer Drill ALS12.0X310
14.0 x 310mm SDS Plus Hammer Drill ALS14.0X310
16.0 x 310mm SDS Plus Hammer Drill ALS16.0X310
18.0 x 310mm SDS Plus Hammer Drill ALS18.0X310
20.0 x 310mm SDS Plus Hammer Drill ALS20.0X310
8.0 x 450mm SDS Plus Hammer Drill ALS08.0X450
10.0 x 450mm SDS Plus Hammer Drill ALS10.0X450
12.0 x 450mm SDS Plus Hammer Drill ALS12.0X450
14.0 x 450mm SDS Plus Hammer Drill ALS14.0X450
16.0 x 450mm SDS Plus Hammer Drill ALS16.0X450
18.0 x 450mm SDS Plus Hammer Drill ALS18.0X450
20.0 x 450mm SDS Plus Hammer Drill ALS20.0X450
25.0 x 450mm SDS Plus Hammer Drill ALS25.0X450
Size and Description Part No.
5.0 x 110mm SDS Plus Hammer Drill ALS05.0X110
5.5 x 110mm SDS Plus Hammer Drill ALS05.5X110
6.0 x 110mm SDS Plus Hammer Drill ALS06.0X110
6.5 x 110mm SDS Plus Hammer Drill ALS06.5X110
7.0 x 110mm SDS Plus Hammer Drill ALS07.0X110
8.0 x 110mm SDS Plus Hammer Drill ALS08.0X110
10.0 x 110mm SDS Plus Hammer Drill ALS10.0X110
5.0 x 160mm SDS Plus Hammer Drill ALS05.0X160
5.5 x 160mm SDS Plus Hammer Drill ALS05.5X160
6.0 x 160mm SDS Plus Hammer Drill ALS06.0X160
6.5 x 160mm SDS Plus Hammer Drill ALS06.5X160
7.0 x 160mm SDS Plus Hammer Drill ALS07.0X160
8.0 x 160mm SDS Plus Hammer Drill ALS08.0X160
10.0 x 160mm SDS Plus Hammer Drill ALS10.0X160
12.0 x 160mm SDS Plus Hammer Drill ALS12.0X160
5.0 x 210mm SDS Plus Hammer Drill ALS05.0X210
5.5 x 210mm SDS Plus Hammer Drill ALS05.5X210
6.0 x 210mm SDS Plus Hammer Drill ALS06.0X210
6.5 x 210mm SDS Plus Hammer Drill ALS06.5X210
7.0 x 210mm SDS Plus Hammer Drill ALS07.0X210
8.0 x 210mm SDS Plus Hammer Drill ALS08.0X210
10.0 x 210mm SDS Plus Hammer Drill ALS10.0X210
12.0 x 210mm SDS Plus Hammer Drill ALS12.0X210
14.0 x 210mm SDS Plus Hammer Drill ALS14.0X210
16.0 x 210mm SDS Plus Hammer Drill ALS16.0X210
18.0 x 210mm SDS Plus Hammer Drill ALS18.0X210
20.0 x 210mm SDS Plus Hammer Drill ALS20.0X210
5.5 x 260mm SDS Plus Hammer Drill ALS05.5X260
6.0 x 260mm SDS Plus Hammer Drill ALS06.0X260
6.5 x 260mm SDS Plus Hammer Drill ALS06.5X260
8.0 x 260mm SDS Plus Hammer Drill ALS08.0X260
10.0 x 260mm SDS Plus Hammer Drill ALS10.0X260
12.0 x 260mm SDS Plus Hammer Drill ALS12.0X260
14.0 x 260mm SDS Plus Hammer Drill ALS14.0X260
16.0 x 260mm SDS Plus Hammer Drill ALS16.0X260
SDS Plus SDS Plus Hammer Drill Bits
INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
6
Armeg’s secondary line, price alternative SDS Plus Hammer Drill Bit Range.
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 7
Size and Description Part No.
Hard Material Chisel EBS.BSC.HM
Size and Description Part No.
250mm Long SDS Plus Chisel - 20mm wide G250B4C
250mm Long SDS Plus Point G250B4P
250mm Long SDS Plus Scaling Chisel
- 40mm wide G250B4SC
Size and Description Part No.
SDS Plus Internal Hexagon Chuck Adaptor HB4CHTIH
SDS Plus Internal Thread Chuck Adaptor HB4CHTSC
SDS Plus 1/2” Socket Driver HB4SOC
SDS Plus 3/8” Socket Driver HB4SOC3/8X090
Size and Description Part No.
SDS Plus Mortar Raking Chisel G175B4MRC6
Size and Description Part No.
SDS Plus Brick Removing Chisel G230B4BC
Size and Description Part No.
Tile Removing Chisel G80SDSTR
7
SDS Plus drive system for machines with roto-stop facility.
SDS Plus Points & Innovation Chisels
Brick Removing Chisel• Carbide tipped steel chisel for rapid removal of complete
bricks enabling insertion of vents and cavity access.• 6mm wide cutting edge. • Minimises chance of brick damage
Mortar Rake Chisel• Formed steel chisel for rapid removal of mortar lines. • Tungsten carbide tips. • 6mm wide cutting edge.• Minimises chance of brick damage.• Specifically designed shape enables chiselling into
corners and also vertical chiselling.
Hard Material Chisel• 80mm wide chisel for chiselling in hard masonry materials.• Designed for chiselling out electrical back boxes.
Tile Removing Chisel• Formed steel chisel for rapid removal of tiles,
tile adhesive & plaster.
G250B4P
G250B4C
SDS Plus Chuck Adaptors& Socket Drivers
HB4CHTIH HB4CHTSC HB4SOC HB4SOC3/8X090
SDS Plus Points & Chisels
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 8
Size
and
Size and Description Part No.
16.0 x 390mm SDS Max Cross Head MX16.0X390
16.0 x 540mm SDS Max Cross Head MX16.0X540
16.0 x 920mm SDS Max Cross Head MX16.0X920
18.0 x 390mm SDS Max Cross Head MX18.0X390
18.0 x 540mm SDS Max Cross Head MX18.0X540
19.0 x 390mm SDS Max Cross Head MX19.0X390
19.0 x 540mm SDS Max Cross Head MX19.0X540
20.0 x 370mm SDS Max Cross Head MX20.0X370
20.0 x 520mm SDS Max Cross Head MX20.0X520
20.0 x 920mm SDS Max Cross Head MX20.0X920
22.0 x 370mm SDS Max Cross Head MX22.0X370
22.0 x 520mm SDS Max Cross Head MX22.0X520
22.0 x 920mm SDS Max Cross Head MX22.0X920
24.0 x 370mm SDS Max Cross Head MX24.0X370
24.0 x 520mm SDS Max Cross Head MX24.0X520
Size and Description Part N
Size and Description Part No.
20.0 x 285mm SDS Max Single Tip MX20.0X285S
22.0 x 285mm SDS Max Single Tip MX22.0X285S
25.0 x 285mm SDS Max Single Tip MX25.0X285S
12.0 x 305mm SDS Max Single Tip MX12.0X305S
14.0 x 305mm SDS Max Single Tip MX14.0X305S
16.0 x 305mm SDS Max Single Tip MX16.0X305S
18.0 x 305mm SDS Max Single Tip MX18.0X305S
12.0 x 390mm SDS Max Single Tip MX12.0X390
13.0 x 390mm SDS Max Single Tip MX13.0X390
14.0 x 390mm SDS Max Single Tip MX14.0X390
15.0 x 390mm SDS Max Single Tip MX15.0X390
20.0 x 430mm SDS Max Single Tip MX20.0X430
22.0 x 430mm SDS Max Single Tip MX22.0X430
25.0 x 430mm SDS Max Single Tip MX25.0X430
16.0 x 450mm SDS Max Single Tip MX16.0X450
18.0 x 450mm SDS Max Single Tip MX18.0X450
12.0 x 540mm SDS Max Single Tip MX12.0X540
13.0 x 540mm SDS Max Single Tip MX13.0X540
14.0 x 540mm SDS Max Single Tip MX14.0X540
15.0 x 540mm SDS Max Single Tip MX15.0X540
Single Tip and Cross Head designs give our SDS Max
longer life, rapid penetration, smoother drilling and result in
outstanding performance for users.
SDS MaxThe Ultimate SDS Max range
8INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
SDS Max Single Tip
• Armeg’s proven single tip design, combined with twin flutes,provides rapid penetration and a very cost effective method ofproducing larger diameter holes.
• Reduced flute lengths on select diameters are ideal for fixingsapplications where machine power is transmitted in the mostefficient manner to maximise drilling performance.
SDS Max Crosshead
• Crosshead design hammer drills provide a combination of smoother drilling and prolonged life to give usersoutstanding performance.
• Design features, such as co-planer faceting and deep clearways,maximise spoil removal.
• Four carbide cutting edges rapidly penetrate the hardest ofmasonry materials with a smoother action and a prolonged lifeexpectancy with high penetration rates.
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 9
Size and Description Part No.
12mm Re-bar Cutter - 85mm long CR12
14mm Re-bar Cutter - 85mm long CR14
16mm Re-bar Cutter - 100mm long CR16
18mm Re-bar Cutter - 100mm long CR18
20mm Re-bar Cutter - 100mm long CR20
25mm Re-bar Cutter - 100mm long CR25
Extension Rod for Drive Adaptor* CREXT
SDS Plus Drive Adaptor for Rebar Cutters CRSDSAD
Thread Convertor (12 & 14mm Cutters Only)* CRTHCON
Water Feed Pressure Pump PTCWFKIT
12mm Rebar Drilling Super Set** CR12SSET
14mm Rebar Drilling Super Set** CR14SSET
16mm Rebar Drilling Super Set** CR16SSET
18mm Rebar Drilling Super Set** CR18SSET
20mm Rebar Drilling Super Set** CR20SSET
25mm Rebar Drilling Super Set** CR25SSET
Size and Description Part No.
25.0 x 370mm SDS Max Cross HeadMX25.0X370
25.0 x 520mm SDS Max Cross Head MX25.0X520
25.0 x 920mm SDS Max Cross Head MX25.0X920
26.0 x 370mm SDS Max Cross HeadMX26.0X370
26.0 x 520mm SDS Max Cross Head MX26.0X520
28.0 x 370mm SDS Max Cross HeadMX28.0X370
28.0 x 570mm SDS Max Cross Head MX28.0X570
30.0 x 370mm SDS Max Cross HeadMX30.0X370
30.0 x 570mm SDS Max Cross Head MX30.0X570
32.0 x 370mm SDS Plus Cross HeadMX32.0X370
32.0 x 570mm SDS Plus Cross Head MX32.0X570
32.0 x 920mm SDS Plus Cross Head MX32.0X920
35.0 x 570mm SDS Plus Cross HeadMX35.0X570
38.0 x 570mm SDS Plus Cross HeadMX38.0X570
40.0 x 570mm SDS Plus Cross HeadMX40.0X570
Size and Description Part No.
300mm Scutch Comb Holder G300MXSCH
360mm Long Chisel - 25mm Wide G360MXC
360mm Long Point G360MXP
500mm Long Chisel - 25mm Wide G500MXC
500mm Long Point G500MXP
50mm Wide Chisel - 400mm Long G50MXSC
80mm Wide Chisel - 300mm Long G80MXSC
Brick Removing Chisel Un-Tipped Blade
- 280mm O/A length G280MXBC30/3
Brick Removing Chisel Carbide Tipped Blade
- 280mm O/A length G280MXBC
9
• Crosshead design that now incorporates increasedsize of carbide side tips enabling smoother and more effectivedrilling action.
• New side tips are now integral to the cutting action. • All Armeg SDS Max drills produce a truer/rounder hole enabling
a stronger bond between fixing and sub-strate.
* 210mm Working length
**Re-Bar Super Set Contents• Re-Bar cutter in the diameter stated.• The equivalent SDS Plus hammer drill bit.• SDS Rebar drive adaptor, common in all sizes.• Thread convertor / extension piece for added depth.• Water feed pipe to connect to water pressure pump;
Water pump part no. PTCWFKIT
5
43
1
2
1 CRTHCON: Thread Convertor
2 12 to 14mm Rebar Cutter
3 18 to 25mm Rebar Cutter
4 CRSDSAD: SDS Plus Drive Adaptor
5 CREXT: Extension Rod
Re-bar Connection Diagram
SDS Max Points & Chisels
The Solution to Drillng RebarA series of highly efficient cutters in a range of diameters to match the most popular anchor sizes. Driven by unique, dedicated water feed adaptors and extensions.
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 10
Size and Description Part No.
5.0 x 150mm Professional Masonry Drill P05.0X150
5.5 x 150mm Professional Masonry Drill P05.5X150
6.0 x 150mm Professional Masonry Drill P06.0X150
6.5 x 150mm Professional Masonry Drill P06.5X150
7.0 x 150mm Professional Masonry Drill P07.0X150
7.0 x 300mm Professional Masonry Drill P07.0X300
8.0 x 150mm Professional Masonry Drill P08.0X150
8.0 x 200mm Professional Masonry Drill P08.0X200
8.0 x 400mm Professional Masonry Drill P08.0X400
10.0 x 150mm Professional Masonry Drill P10.0X150
10.0 x 200mm Professional Masonry Drill P10.0X200
10.0 x 300mm Professional Masonry Drill P10.0X300
10.0 x 400mm Professional Masonry Drill P10.0X400
10.0 x 600mm Professional Masonry Drill P10.0X600
12.0 x 150mm Professional Masonry Drill P12.0X150
12.0 x 200mm Professional Masonry Drill P12.0X200
12.0 x 400mm Professional Masonry Drill P12.0X400
13.0 x 150mm Professional Masonry Drill P13.0X150
13.0 x 400mm Professional Masonry Drill P13.0X400
14.0 x 150mm Professional Masonry Drill P14.0X150
14.0 x 400mm Professional Masonry Drill P14.0X400
16.0 x 150mm Professional Masonry Drill P16.0X150
16.0 x 400mm Professional Masonry Drill P16.0X400
20.0 x 160mm Professional Masonry Drill P20.0X160
20.0 x 400mm Professional Masonry Drill P20.0X400
22.0 x 400mm Professional Masonry Drill P22.0X400
25.0 x 400mm Professional Masonry Drill P25.0X400
Professional MasonrySDS Plus Drilling Technology for3 Jaw Chuck Machines• Milled fluted, designed for cordless power tool drilling.
• Consistently rounder, more accurate holes.
• Tip technology increases average hole per charge.
• Copper brazed.
Size and Size and Description Part No.
6.0mm Diamond Blade - a-line DXB06.0
6.5mm Mortar Rake DXMR06.5
8.0mm Mortar Rake DXMR08.0
10.0mm Mortar Rake DXMR10.0
SDS Plus Mortar Rake Drive Adaptor DXB4MRDEA
SDS Plus Mortar Rake Set - 4 Piece DXB4MRSET1
(3 Mortar Rakes & 1 Adaptor)
SDS Plus Mortar Rake Set - 5 Piece DXB4MRSET2
(3 Mortar Rakes, 1 Adaptor & 1 Chisel)
SDS Plus Mortar Rake Chisel G175B4MRC6
INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
10
Mortar Raking• The complete solution to mortar raking & re-pointing
• Hollow mortar rake is best used in conjunction with SDS Plusmortar rake adaptor and masonry dust extraction unit to give dust free result.
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 11
Size and Description Part No.
22.0 x 400mm Standard Masonry Drill PZ22.0X400
16 Piece Masonry Drill Set (Wallet) PZSET16
4, 5, 5.5, 6, 6.5 x100mm; 7, 8, 10, 12, 13 x150mm; 7, 8, 10, 13, 16, 22 x400mm
5 Piece Masonry Drill Set (Case) PZSET5
4, 5, 5.5, 6.5, 7mm
7 Piece Masonry Drill Set (Case) PZSET7
5, 5.5, 6, 6.5, 7, 8, 10mm
15 Piece Variety Drill Bit Set (Case) VARSET15
Masonry 4, 5.5, 6.5, 8, 10mm; Wood 4, 5, 6, 8, 10mm; HSS 4, 5, 6, 8, 10mm
Size and Description Part No.
14-18mm Extension Rod* PZ14-18EX
20-25mm Extension Rod* PZ20-25EX
14-18mm SDS Plus Extension Rod* PZ14-18EXSDS
20-25mm SDS Plus Extension Rod* PZ20-25EXSDS
14.0 x 300mm Threaded Shank Masonry Drill PZ14.0X300TH
16.0 x 300mm Threaded Shank Masonry Drill PZ16.0X300TH
18.0 x 300mm Threaded Shank Masonry Drill PZ18.0X300TH
20.0 x 300mm Threaded Shank Masonry Drill PZ20.0X300TH
22.0 x 300mm Threaded Shank Masonry Drill PZ22.0X300TH
25.0 x 300mm Threaded Shank Masonry Drill PZ25.0X300TH
* 250mm Working length
Size and Description Part No.
4.0 x 75mm Standard Masonry Drill PZ04.0X075
5.0 x 85mm Standard Masonry Drill PZ05.0X085
5.0 x 150mm Standard Masonry Drill PZ05.0X150
5.5 x 85mm Standard Masonry Drill PZ05.5X085
5.5 x 150mm Standard Masonry Drill PZ05.5X150
6.0 x 100mm Standard Masonry Drill PZ06.0X100
6.0 x 150mm Standard Masonry Drill PZ06.0X150
6.0 x 200mm Standard Masonry Drill PZ06.0X200
6.5 x 100mm Standard Masonry Drill PZ06.5X100
6.5 x 150mm Standard Masonry Drill PZ06.5X150
6.5 x 400mm Standard Masonry Drill PZ06.5X400
7.0 x 100mm Standard Masonry Drill PZ07.0X100
7.0 x 150mm Standard Masonry Drill PZ07.0X150
7.0 x 400mm Standard Masonry Drill PZ07.0X400
8.0 x 120mm Standard Masonry Drill PZ08.0X120
8.0 x 150mm Standard Masonry Drill PZ08.0X150
8.0 x 200mm Standard Masonry Drill PZ08.0X200
8.0 x 400mm Standard Masonry Drill PZ08.0X400
10.0 x 120mm Standard Masonry Drill PZ10.0X120
10.0 x 150mm Standard Masonry Drill PZ10.0X150
10.0 x 200mm Standard Masonry Drill PZ10.0X200
10.0 x 400mm Standard Masonry Drill PZ10.0X400
12.0 x 150mm Standard Masonry Drill PZ12.0X150
12.0 x 200mm Standard Masonry Drill PZ12.0X200
12.0 x 400mm Standard Masonry Drill PZ12.0X400
13.0 x 150mm Standard Masonry Drill PZ13.0X150
13.0 x 400mm Standard Masonry Drill PZ13.0X400
14.0 x 150mm Standard Masonry Drill PZ14.0X150
14.0 x 400mm Standard Masonry Drill PZ14.0X400
16.0 x 150mm Standard Masonry Drill PZ16.0X150
16.0 x 400mm Standard Masonry Drill PZ16.0X400
18.0 x 160mm Standard Masonry Drill PZ18.0X160
18.0 x 400mm Standard Masonry Drill PZ18.0X400
20.0 x 160mm Standard Masonry Drill PZ20.0X160
20.0 x 400mm Standard Masonry Drill PZ20.0X400
Standard MasonryRoll Forged, Straight Shank• A straight shank masonry bit for use in 3 jaw chuck machines.
• Ideal for general purpose drilling in most masonry materials.
• Rolled flutes and percussion grade carbide tips.
Threaded ShankThreaded Shank Professional Masonry Drills & Extension Rods• Ideal for use when drilling through cavities and extra deep
holes.
• Interchangeable extension rods.
• SDS Plus shanked extension rods available.
11
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 12
Size and Description Part No.
7.0 x 150mm A Taper Drill A07.0X150
8.0 x 150mm A Taper Drill A08.0X150
10.0 x 150mm A Taper Drill A10.0X150QS
10.0 x 225mm A Taper Drill A10.0X225QS
10.0 x 300mm A Taper Drill A10.0X300QS
10.0 x 400mm A Taper Drill A10.0X400QS
11.0 x 225mm A Taper Drill A11.0X225
13.0 x 250mm A Taper Drill A13.0X250
Size and Description Part No.
Bush Hammer Head - Coarse BHHDCO
Bush Hammer Head - Fine BHHDFI
SDS Max Drive Shank for Bush Hammer Heads BHSHMX
280mm Long J1 Chisel - 22m wide G280J1C
300mm Long B2 Chisel - 25mm wide G300B2C
300mm Long K1 Chisel - 25mm wide G300K1C
300mm Long K1 Point G300K1P
380mm Long B2 Chisel - 25mm wide G380B2C
380mm Long B2 Point G380B2P
380mm Long K1 Chisel - 25mm wide G380K1C
380mm Long K1 Point G380K1P
450mm Long BB Chisel - 30mm wide G450BBC
450mm Long BB Point G450BBP
Size and Description Part No.
12.0 x 200mm K Taper Drill K12.0X200
12.0 x 400mm K Taper Drill K12.0X400
13.0 x 200mm K Taper Drill K13.0X200
13.0 x 400mm K Taper Drill K13.0X400
14.0 x 200mm K Taper Drill K14.0X200
14.0 x 400mm K Taper Drill K14.0X400
16.0 x 250mm K Taper Drill K16.0X250
16.0 x 400mm K Taper Drill K16.0X400
18.0 x 250mm K Taper Drill K18.0X250
18.0 x 400mm K Taper Drill K18.0X400
18.0 x 600mm K Taper Drill K18.0X600
20.0 x 250mm K Taper Drill K20.0X250
20.0 x 400mm K Taper Drill K20.0X400
22.0 x 250mm K Taper Drill K22.0X250
22.0 x 400mm K Taper Drill K22.0X400
24.0 x 400mm K Taper Drill K24.0X400
25.0 x 250mm K Taper Drill K25.0X250
25.0 x 400mm K Taper Drill K25.0X400
25.0 x 600mm K Taper Drill K25.0X600
25.0 x 900mm K Taper Drill K25.0X900
26.0 x 400mm K Taper Drill K26.0X400
28.0 x 400mm K Taper Drill K28.0X400
30.0 x 400mm K Taper Drill K30.0X400
32.0 x 400mm K Taper Drill K32.0X400
35.0 x 400mm K Taper Drill K35.0X400
38.0 x 400mm K Taper Drill K38.0X400
40.0 x 400mm K Taper Drill K40.0X400
44.0 x 400mm K Taper Drill K44.0X400
50.0 x 400mm K Taper Drill K50.0X400
INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
A Taper DrillsIdeal for use as pilot drills for Professional, Extra Long HighSpeed Masonry & Dry Diamond Core Drills.
SDS Max Points & Chisels
A B C D E F
• A. Point, B. Chisel, C. Wide Chisel, D. Brick Removing Chisel,E. Clay Spade, F. Tarmac Cutter
• SDS Plus and SDS Max points & chisels can be found on relevant product pages.
• Quality forgings and precision machining combine to provide adurable steel with proven performance standards. A broad rangeis available to cater for most machine types currently available.Ideal for many applications including demolition, breakthroughwork, chiselling, stripping plaster, channelling and mortar chasing.Can be used in most masonry materials such as concrete, brickwork, mortar, re-inforced concrete etc.
12
K Taper Drills• Flexible and cost effective method of drilling in most masonry
materials and concrete.
• When combined with a broad range of drill holders, (see page 14) the K taper system becomes extremely versatile and can be used in any electro-pneumatic drilling machine, from SDS Max to Spline, Kango and Wacker.
_Drilling brochure new_Layout 1 07/09/2011 12:34 Page 13
Size and Description Part No.
66mm Hi-Speed Masonry Core Drill CL66S
80mm Hi-Speed Masonry Core Drill CL80S
110mm Hi-Speed Masonry Core Drill CL110S
7mm Pilot Drill CLPDS
200mm Tommy Bar CLTB
100mm SDS Plus Drive Adaptor DL100B4S
100mm Hexagon Shank Drive Adaptor DL100X13S
300mm SDS Plus Drive Adaptor DL300B4S
300mm Hexagon Shank Drive Adaptor DL300X13S
Plumbers Hi-Speed Masonry Core Drill Set CL3SETP
Set Contains: 1 x CL30S, CL50S & CL66S, 1 x DL100B4S &
DL300B4S, 2 x CLPDS, 1 x CLTB & 1 x 5.5, 6.0, 7.0, 8.0 &
10.0mm x 160mm SDS Plus Hammer Drill.
Size and Description Part No.
30mm Professional Masonry Core Drill CO30
35mm Professional Masonry Core Drill CO35
40mm Professional Masonry Core Drill CO40
45mm Professional Masonry Core Drill CO45
50mm Professional Masonry Core Drill CO50
55mm Professional Masonry Core Drill CO55
60mm Professional Masonry Core Drill CO60
65mm Professional Masonry Core Drill CO65
75mm Professional Masonry Core Drill CO75
80mm Professional Masonry Core Drill CO80
90mm Professional Masonry Core Drill CO90
Size and Description Part No.
450mm Long K1 Chisel - 25mm wide G450K1C
450mm Long K1 Point G450K1P
450mm Long KB Chisel - 30mm wide G450KBC
450mm Long KB Point G450KBP
50mm Wide B2 Scaling Chisel - 300mm long G50B2SC
50mm Wide J1 Chisel - 280mm long G50J1SC
50mm Wide K1 Chisel - 300mm long G50K1SC
75mm Wide B2 Scaling Chisel - 300mm long G75B2SC
75mm Wide J1 Chisel - 300mm long G75J1SC
75mm Wide K1 Chisel - 300mm long G75K1SC
Size and Description Part No.
25mm Hi-Speed Masonry Core Drill CL25S
30mm Hi-Speed Masonry Core Drill CL30S
40mm Hi-Speed Masonry Core Drill CL40S
45mm Hi-Speed Masonry Core Drill CL45S
50mm Hi-Speed Masonry Core Drill CL50S
Machine to Shank Type• K1 - Kango 928, 900K, 950K, 1400
Hitachi H55SA, DH50SAMakita HR3850K, HM1200K
• B2 - Bosch 11205, 11206, 11208, 11209, 11214.7, 11306AEG PH240D, PH350, PH38Black & Decker P8022, 8032, 8038, Metabo 11285, 11315, 11295
• BB - Bosch 11304• KB - Kango 2500 1.1/4” x 6.1/4” (32x160mm) fittings• J1 - Makita 8035NB, HR3510, HR3520, HM0810
13
Hi-Speed MasonryCore Drill - 65mm throat• Gives versatility of core drilling from 25 to 110mm diameter• Speeds of up to 35% faster and with minimal breakthrough
not normally associated with core drilling. • Lightweight, thin wall design, weighing 50% less than
traditional core drills, meets less resistance.• More accurate holes can be drilled faster and break through
minimised by drilling on rotation only mode in softer materials.• Innovative self locking mechanism,
for securing the pilot drill, eliminates the need for awkward grub screws.
• Ideal for SDS Plus hammer machines drilling brick and block.
Professional MasonryCore Drill - 78mm throat• Made from solid steel stock• Tough enough for drilling large diameter holes up to 6” in
concrete and other masonry materials.• Versatility is available with ‘K’ taper adaptors.• Can be used in a wide range of machines using drill holders.• Extension rods, pilot drills, extractor drifts,
and adaptors all support the ability to switch machines, core diameters, length etc. to exactly match userrequirements.
• Ideal for SDS Max hammer machines drilling concrete.
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 14
Size and Description Part
Drill Holders and Quick Fit adaptors
Size and Description Part No.
Spline to K Taper Drill Holder HB2K
SDS Plus to K Taper Drill Holder HB4K
C2 Shank to K Taper Drill Holder HC2K
K1 Shank to K Taper Drill Holder HK1K
K2 Shank to K Taper Drill Holder HK2K
SDS Max to K Taper Drill Holder HMXK
V2 Shank to K Taper Drill Holder HV2K
W1 Shank to K Taper Drill Holder HW1K
Spline to SDS Plus Quick Fit Adaptor QFB2
SDS Max to SDS Plus Quick Fit Adaptor QFMX
Size and Description Part No.
22 x 300mm Dry Diamond Core Drill CDD022LS
28 x 300mm Dry Diamond Core Drill CDD028LS
38 x 150mm Dry Diamond Core Drill CDD038
48 x 150mm Dry Diamond Core Drill CDD048
52 x 150mm Dry Diamond Core Drill CDD052
65 x 150mm Dry Diamond Core Drill CDD065
78 x 150mm Dry Diamond Dore Drill CDD078
107 x 150mm Dry Diamond Core Drill CDD107
117 x 150mm Dry Diamond Core Drill CDD117
127 x 150mm Dry Diamond Core Drill CDD127
152 x 150mm Dry Diamond Core Drill CDD152
5 Piece Dry Diamond Core Drill Set CDD5PCSET
14
Size and Description Part No.
100mm Professional Masonry Core Drill C100
115mm Professional Masonry Core Drill C115
125mm Professional Masonry Core Drill C125
152.4mm Professional Masonry Core Drill C152.4
Professional Masonry Core Drill Accessories
250mm SDS Max Adaptor D250MX
470mm SDS Max Adaptor D470MX
175mm SDS Plus Adaptor D175B4
300mm SDS Plus Adaptor 9D300B4
100mm K Taper Adaptor D100K
250mm K Taper Adaptor D250K
400mm K Taper Adaptor D400K
100mm K Taper Heavy Duty Adaptor D100KHD
250mm K Taper Heavy Duty Adaptor D250KHD
400mm K Taper Heavy Duty Adaptor D400KHD
SDS Plus Drill Holder HB4K
SDS Max Drill Holder HMXK
Kango 950 Drill Holder HK1K
250mm K Taper Extension Rod E250K
400mm K Taper Extension Rod E400K
550mm K Taper Extension Rod E550K
A Taper Pilot Drill - 11.0 X 130mm CPD
Extractor Drift DDR
INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
Pilot Drill (CPD)
Professional MasonryCore Drill
Drill Holder
K TaperExtension
RodIntegral
SDS MaxAdaptor
IntegralSDS PlusAdaptor
Suitable Chuck eg. 3 Jaw or Direct Drive
TAPER DRIVE OPTION
Hi-SpeedMasonry Core
Drill
Pilot Drill (CLPDS)
HexagonAdaptor
SDS PlusAdaptor
DIRECT DRIVE OPTION
Dry DiamondCore Drill - 130mm throat• Combination of superior design and high quality manufacture.• Ideally suited to lightweight building materials, ordinary facing
brickwork and blockwork up to 10n/mm2.• Range is designed to give rapid, clean service entries with
virtually no making good required.• Virtually no ‘break out’ damage.• Power tools of over 900W with a
slipping clutch are required.• Rotary action only. Can be SDS
Plus or Hex driven• Full range of accessories available.• 1/2” BSP thread system.
K Taper Adaptor
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 15
1/2” BSP AccessoriesSize and Description Part No.
1/2” BSP to Hex Drive Adaptor - 70mm D070HEXBSP1/2
1/2” BSP to SDS Plus Drive Adaptor - 115mm D115B4BSP1/2
1/2” BSP to SDS Plus Drive Adaptor - 250mm D250SDSBSP1/2
1/2” BSP to 1/2” BSP Adaptor - 200mm D2001/2BSPEXT
Hex Shank Extension Rod - 275mm D275HEXEXT
Extractor Drift Pin DDR
3 Piece Hex Drive Adaptor Pack DHEXAP
Contains: D070HEXBSP1/2, A10.0X225QS & DDR
3 Piece SDS Plus Drive Adaptor Pack DSDSAP
Contains: D115B4BSP1/2, A10.0X225QS & DDR
10.0 X 225mm Guide Rod 9A10.0X225GR
10.0 X 225mm A Taper Drill A10.0X225QS
10.0 X 300mm A Taper Drill A10.0X300QS
10.0 X 400mm A Taper Drill A10.0X400QS
Dry Diamond Accessory Set DDD.APAC.1
1/2” BSP Core Drill Dust Extraction Unit DDHDEXT
Size and Description Part No.
34mm Extra Long HSM Core Drill CT034X150
40mm Extra Long HSM Core Drill CT040X150
52mm Extra Long HSM Core Drill CT052X150
65mm Extra Long HSM Core Drill CT065X150
78mm Extra Long HSM Core Drill CT078X150
103mm Extra Long HSM Core Drill CT103X150
117mm Extra Long HSM Core Drill CT117X150
Vent Sinking Set CLSETVENT
15
5 Piece Dry DiamondCore Drill Set
• Set Contains: 1 x 127, 117, 65, 52 & 42mm Dry Diamond Core Drill. SDS Plus & Hexagon Adaptor & 200mm Extension.400mm Pilot Drill. 200mm Guide Rod. Drift Pin.
Extra Long High SpeedMasonry Core Drill- 120mm throat• Product length allows user to drill in one continuous action
with no need to stop and break out the core.• Can be used with hammer action while utilising the same
accessories as used in Dry Diamond drilling.• Thinner, lightweight design allows both hammer action and
rotary only to be utilised. • Faster drilling saves time and money.• Product design and hammer action of SDS
plus machines contribute to rapid andprogressive penetration in masonry.
• Dust extraction available. • 1/2” BSP thread system.
Vent Fixing Set• Set Contains: 1 x 117mm Extra Long HSM Core Drill.
1 x A Taper Pilot Drill 10 X 225mm.1 x Hexagon Drive Adaptor.1 x 200mm Extension Bar. 1 x Drift Pin.
Dust Extraction Unit• Uniquely designed core drill accessory that
enables both dust extraction and water injection.
• Adaptor incorporates both male and female 1/2” BSP threads enabling the direct fixing of a core and drive adaptor unit.
Dry DiamondAccessory Set
• Set Contains: Drift Pin. 1 x Guide Rod. 1 x 10 X 225 mmPilot Drill. 1 X 70mm Long Hex Adaptor to 1/2” BSP.1 x 200mm 1/2” BSP Extension, 1 x 115mm SDS Adaptorto 1/2” BSP.
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 16
INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
16
Extra Long High Speed Masonry & Dry Diamond Core Drill Connection Diagram
SDS PLUS DRIVE OPTIONS HEXAGON DRIVE OPTIONS
HB4CHTSC
D115B4BSP1/2
D250SDSBSP1/2
D2001/2BSPEXT
D070HEXBSP1/2
D275HEXEXT
D2001/2UN1/2BSP
_Drilling brochure new_Layout 1 07/09/2011 12:35 Page 17
Size and Description Part No.
35.0mm Flat Wood Bit WF35.0X160
38.0mm Flat Wood Bit WF38.0X160
300mm Flat Wood Bit Extension Rod WHE300
80mm SDS Plus Flat Wood Bit Adaptor WSE080
300mm SDS Plus Flat Wood Bit Extension Rod WSE300
6 Piece Flat Wood Bit Set WF6SET
Size and Description Part No.
6.0 x 205 SDS Plus Wood Auger Drill WS06.0X205
8.0 x 205 SDS Plus Wood Auger Drill WS08.0X205
10.0 x 205 SDS Plus Wood Auger Drill WS10.0X205
10.0 x 400 SDS Plus Wood Auger Drill WS10.0X400
12.0 x 205 SDS Plus Wood Auger Drill WS12.0X205
12.0 x 400 SDS Plus Wood Auger Drill WS12.0X400
13.0 x 205 SDS Plus Wood Auger Drill WS13.0X205
16.0 x 205 SDS Plus Wood Auger Drill WS16.0X205
16.0 x 400 SDS Plus Wood Auger Drill WS16.0X400
18.0 x 400 SDS Plus Wood Auger Drill WS18.0X400
19.0 x 205 SDS Plus Wood Auger Drill WS19.0X205
20.0 x 205 SDS Plus Wood Auger Drill WS20.0X205
20.0 x 400 SDS Plus Wood Auger Drill WS20.0X400
22.0 x 205 SDS Plus Wood Auger Drill WS22.0X205
22.0 x 400 SDS Plus Wood Auger Drill WS22.0X400
24.0 x 400 SDS Plus Wood Auger Drill WS24.0X400
Size and Description Part No.
3.0mm Brad Point WBP0300
4.0mm Brad Point WBP0400
5.0mm Brad Point WBP0500
6.0mm Brad Point WBP0600
7.0mm Brad Point WBP0700
8.0mm Brad Point WBP0800
10.0mm Brad Point WBP1000
Size and Description Part No.
6.0mm Flat Wood Bit WF06.0X160
8.0mm Flat Wood Bit WF08.0X160
10.0mm Flat Wood Bit WF10.0X160
12.0mm Flat Wood Bit WF12.0X160
13.0mm Flat Wood Bit WF13.0X160
14.0mm Flat Wood Bit WF14.0X160
16.0mm Flat Wood Bit WF16.0X160
18.0mm Flat Wood Bit WF18.0X160
19.0mm Flat Wood Bit WF19.0X160
20.0mm Flat Wood Bit WF20.0X160
22.0mm Flat Wood Bit WF22.0X160
25.0mm Flat Wood Bit WF25.0X160
26.0mm Flat Wood Bit WF26.0X160
28.0mm Flat Wood Bit WF28.0X160
30.0mm Flat Wood Bit WF30.0X160
32.0mm Flat Wood Bit WF32.0X160
17
Brad Point-Lip & Spur Drill• HSS, chrome vanadium manufactured drill bit.• Ideal for the production of fast, clean and accurate holes in
hardwood, plywood, chipboard, natural hard and soft woods.• Integral centre point and twin cutting spurs enable self
centering, quick start and accurate drilling.
Flat Wood Bit • Integral centre point and twin cutting edges enhance speed
and rapid removal• Used with special adaptors, Armeg Flat Wood Bits can be
used in SDS Plus machines with hammer stop facility.
Flat WoodBit Set• A handy 6 piece walleted set
containing the most popular flat bit sizes.
• Contains 1 x 13.0, 16.0, 20.0, 22.0, 25.0, 32.0mm
SDS Plus Wood Auger• SDS Wood augers incorporate ground and sharpened
combination cutting edges.• Produce fast, clean and accurate holes.• Optimum scroll size allows perfect progression and minimised
damaging breakout.• Hardened and sharpened cutting edges enable the number of
holes per charge achieved in cordless machines to be substantially increased.
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 18
Size and Description Part No.
10.0mm Wood Beaver Drill Bit WWB10.0T
12.0mm Wood Beaver Drill Bit WWB12.0T
13.0mm Wood Beaver Drill Bit WWB13.0T
16.0mm Wood Beaver Drill Bit WWB16.0T
18.0mm Wood Beaver Drill Bit WWB18.0T
19.0mm Wood Beaver Drill Bit WWB19.0T
20.0mm Wood Beaver Drill Bit WWB20.0T
22.0mm Wood Beaver Drill Bit WWB22.0T
25.0mm Wood Beaver Drill Bit WWB25.0T
32.0mm Wood Beaver Drill Bit WWB32.0T
Wood Beaver 3 Piece “Stubby Set” Set WWB3PCSET120
Wood Beaver 4 Piece Set - 16, 20, 25, 32mm WWB4PCSET
1/4” Wood Beaver SDS Plus Drive Adaptor
(Fits 10 to 25mm) SDS1/4WB055
7/16” Wood Beaver SDS Plus Drive Adaptor
(Fits 32mm) SDS7/16WB090
1/4” Wood Beaver Extension Rod - 250mm Long
(Fits 10 to 25mm) WWB1/4HEX250
Size and Description Part No.
25.0 x 205mm SDS Plus Wood Auger Drill WS25.0X205
26.0 x 205mm SDS Plus Wood Auger Drill WS26.0X205
32.0 x 205mm SDS Plus Wood Auger Drill WS32.0X205
Size and Description Part No.
6.0 x 235mm Hex Shank Wood Auger Drill WH06.0X235
8.0 x 235mm Hex Shank Wood Auger Drill WH08.0X235
8.0 x 450mm Hex Shank Wood Auger Drill WH08.0X450
10.0 x 235mm Hex Shank Wood Auger Drill WH10.0X235
10.0 x 450mm Hex Shank Wood Auger Drill WH10.0X450
12.0 x 235mm Hex Shank Wood Auger Drill WH12.0X235
12.0 x 450mm Hex Shank Wood Auger Drill WH12.0X450
13.0 x 235mm Hex Shank Wood Auger Drill WH13.0X235
13.0 x 450mm Hex Shank Wood Auger Drill WH13.0X450
16.0 x 100mm Hex Shank Wood Auger Drill WH16.0X100
16.0 x 155mm Hex Shank Wood Auger Drill WH16.0X155
16.0 x 235mm Hex Shank Wood Auger Drill WH16.0X235
16.0 x 450mm Hex Shank Wood Auger Drill WH16.0X450
18.0 x 235mm Hex Shank Wood Auger Drill WH18.0X235
19.0 x 235mm Hex Shank Wood Auger Drill WH19.0X235
19.0 x 450mm Hex Shank Wood Auger Drill WH19.0X450
20.0 x 100mm Hex Shank Wood Auger Drill WH20.0X100
20.0 x 155mm Hex Shank Wood Auger Drill WH20.0X155
20.0 x 235mm Hex Shank Wood Auger Drill WH20.0X235
20.0 x 450mm Hex Shank Wood Auger Drill WH20.0X450
22.0 x 155mm Hex Shank Wood Auger Drill WH22.0X155
22.0 x 235mm Hex Shank Wood Auger Drill WH22.0X235
22.0 x 450mm Hex Shank Wood Auger Drill WH22.0X450
25.0 x 100mm Hex Shank Wood Auger Drill WH25.0X100
25.0 x 155mm Hex Shank Wood Auger Drill WH25.0X155
25.0 x 235mm Hex Shank Wood Auger Drill WH25.0X235
25.0 x 450mm Hex Shank Wood Auger Drill WH25.0X450
32.0 x 100mm Hex Shank Wood Auger Drill WH32.0X100
32.0 x 155mm Hex Shank Wood Auger Drill WH32.0X155
32.0 x 235mm Hex Shank Wood Auger Drill WH32.0X235
32.0 x 450mm Hex Shank Wood Auger Drill WH32.0X450
INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
18
Hexagon Shank Wood Auger• Made to the same exacting professional standards as the
SDS Plus shank option.• Hexagon shank for use in rotary machines with 3 jaw chuck
holding system.
• The Wood Beaver’s quad-flute and quad-cuttinghead design sets it apart from other wood drill bits on the market and gives a drilling performance you can’t beat.
ULTRA CLEAN BREAK THROUGHEXTREME DRILLING COMFORT & BALANCEFASTER DRILLING SPEED MAXIMUM HOLES PER CHARGERAPID DIAMETER TOOL CHANGE
• Wood Beaver the all round drill bit, a must havefor all tradesmen.
the next generation wood drill
Wood BeaverStubby Set• 120mm length design ideal for
inter-joist drilling. • Contains 1 x 16, 20 & 25mm
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 19
Size and Description Part No.
35mm Super Wood Drill Cutter WC035X055
55mm Super Wood Drill Cutter WC055X055
60mm Super Wood Drill Cutter WC060X055
80mm Super Wood Drill Cutter WC080X055
Size and Description Part No.
IMPERIAL
1/16” HSS Drill (Bulk Qty 10) YB0010L
1/16” HSS Drill (Walleted Qty 1) YB0010W
5/64” HSS Drill (Bulk Qty 10) YB0020L
5/64” HSS Drill (W) YB0020W
3/32” HSS Drill (Bulk Qty 10) YB0030L
3/32” HSS Drill (W) YB0030W
7/64” HSS Drill (Bulk Qty 10) YB0040L
7/64” HSS Drill (W) YB0040W
1/8” HSS Drill (Bulk Qty 10) YB0050L
1/8” HSS Drill (W) YB0050W
9/64” HSS Drill (Bulk Qty 10) YB0060L
9/64” HSS Drill (W) YB0060W
5/32” HSS Drill (Bulk Qty 10) YB0070L
Size and Description Part No.
5/32” HSS Drill (W) YB0070W
11/64” HSS Drill (Bulk Qty 10) YB0080L
11/64” HSS Drill (W) YB0080W
3/16” HSS Drill (Bulk Qty 10) YB0090L
3/16” HSS Drill (W) YB0090W
13/64” HSS Drill (Bulk Qty 10) YB0100L
13/64” HSS Drill (W) YB0100W
7/32” HSS Drill (Bulk Qty 10) YB0110L
7/32” HSS Drill (W) YB0110W
15/64” HSS Drill (Bulk Qty 10) YB0120L
15/64” HSS Drill (W) YB0120W
1/4” HSS Drill (Bulk Qty 10) YB0130L
1/4” HSS Drill (W) YB0130W
17/64” HSS Drill (Bulk Qty 10) YB0140L
17/64” HSS Drill (W) YB0140W
9/32” HSS Drill (Bulk Qty 10) YB0150L
9/32” HSS Drill (W) YB0150W
19/64” HSS Drill (Bulk Qty 10) YB0160L
19/64” HSS Drill (W) YB0160W
5/16” HSS Drill (Bulk Qty 10) YB0170L
5/16” HSS Drill (W) YB0170W
21/64” HSS Drill (Bulk Qty 10) YB0180L
21/64” HSS Drill (W) YB0180W
11/32” HSS Drill (Bulk Qty 10) YB0190L
11/32” HSS Drill (W) YB0190W
23/64” HSS Drill (Bulk Qty 5) YB0200L
23/64” HSS Drill (W) YB0200W
3/8” HSS Drill (Bulk Qty 5) YB0210L
3/8” HSS Drill (W) YB0210W
25/64” HSS Drill (Bulk Qty 5) YB0220L
25/64” HSS Drill (W) YB0220W
13/32” HSS Drill (Bulk Qty 5) YB0230L
13/32” HSS Drill (W) YB0230W
27/64” HSS Drill (Bulk Qty 5) YB0240L
27/64” HSS Drill (W) YB0240W
7/16” HSS Drill (Bulk Qty 5) YB0250L
7/16” HSS Drill (W) YB0250W
29/64” HSS Drill (Bulk Qty 5) YB0260L
29/64” HSS Drill (W) YB0260W
15/32” HSS Drill (Bulk Qty 5) YB0270L
15/32” HSS Drill (W) YB0270W
31/64” HSS Drill (Bulk Qty 5) YB0280L
31/64” HSS Drill (W) YB0280W
1/2” HSS Drill (Bulk Qty 5) YB0290L
1/2” HSS Drill (W) YB0290W
19High Speed Steel Drill• Armeg roll forge HSS drill bits possess properties and
capabilities close to that of flute ground drill bits.• High grade steel and optimal flute geometry.• Flute ground manufacturing tolerances (DIN338)• Optimal performance in steel and cast materials to 580H/mm2
• Optimal grinding processes ensure drill balance, reliableperformance and hole tolerance.
• Ideal for small workshops, automotive maintenance and lightengineering, as well as electrical and plumbing applications.
Super Wood Drill• Large slots for easy removal of material after drilling. • Rapid penetration in wood. • Use standard holesaw adaptors.
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 20
Size and Description Part No.
HIGH SPEED STEEL DRILL - METRIC
11.0mm HSS Drill (Bulk Qty 5) YM1100L
11.0mm HSS Drill (W) YM1100W
11.5mm HSS Drill (Bulk Qty 5) YM1150L
11.5mm HSS Drill (W) YM1150W
12.0mm HSS Drill (Bulk Qty 5) YM1200L
12.0mm HSS Drill (W) YM1200W
12.5mm HSS Drill (Bulk Qty 5) YM1250L
12.5mm HSS Drill (W) YM1250W
13.0mm HSS Drill (Bulk Qty 5) YM1300L
13.0mm HSS Drill (W) YM1300W
13 Piece Metric HSS Set (Plastic Case) YMSET13
19 Piece Metric HSS Set (Metal Case) YMSET19
25 Piece Metric HSS Set (Metal Case) YMSET25
7 Piece Metric HSS Set (Plastic Case) YMSET7
Size and Description Part No.
1.0mm HSS Split Point Drill (Bulk Qty 10) YMSP0100L
1.0mm HSS Split Point Drill (Walleted Qty 1) YMSP0100W
1.5mm HSS Split Point Drill (Bulk Qty 10) YMSP0150L
1.5mm HSS Split Point Drill (W) YMSP0150W
2.0mm HSS Split Point Drill (Bulk Qty 10) YMSP0200L
2.0mm HSS Split Point Drill (W) YMSP0200W
2.5mm HSS Split Point Drill (Bulk Qty 10) YMSP0250L
2.5mm HSS Split Point Drill (W) YMSP0250W
3.0mm HSS Split Point Drill (Bulk Qty 10) YMSP0300L
3.0mm HSS Split Point Drill (W) YMSP0300W
3.3mm HSS Split Point Drill (Bulk Qty 10) YMSP0330L
3.3mm HSS Split Point Drill (W) YMSP0330W
3.5mm HSS Split Point Drill (Bulk Qty 10) YMSP0350L
3.5mm HSS Split Point Drill (W) YMSP0350W
4.0mm HSS Split Point Drill (Bulk Qty 10) YMSP0400L
4.0mm HSS Split Point Drill (W) YMSP0400W
Size and Description Part No.
HIGH SPEED STEEL DRILL - METRIC
1.0mm HSS Drill (Bulk Qty 10) YM0100L
1.0mm HSS Drill (Walleted Qty 1) YM0100W
1.5mm HSS Drill (Bulk Qty 10) YM0150L
1.5mm HSS Drill (W) YM0150W
2.0mm HSS Drill (Bulk Qty 10) YM0200L
2.0mm HSS Drill (W) YM0220W
2.5mm HSS Drill (Bulk Qty 10) YM0250L
2.5mm HSS Drill (W) YM0250W
3.0mm HSS Drill (Bulk Qty 10) YM0300L
3.0mm HSS Drill (W) YM0300W
3.3mm HSS Drill (Bulk Qty 10) YM0330L
3.3mm HSS Drill (W) YM0330W
3.5mm HSS Drill (Bulk Qty 10) YM0350L
3.5mm HSS Drill (W) YM0350W
4.0mm HSS Drill (Bulk Qty 10) YM0400L
4.0mm HSS Drill (W) YM0400W
4.2mm HSS Drill (Bulk Qty 10) YM0420L
4.2mm HSS Drill (W) YM0420W
4.5mm HSS Drill (Bulk Qty 10) YM0450L
4.5mm HSS Drill (W) YM0450W
5.0mm HSS Drill (Bulk Qty 10) YM0500L
5.0mm HSS Drill (W) YM0500W
5.5mm HSS Drill (Bulk Qty 10) YM0550L
5.5mm HSS Drill (W) YM0550W
6.0mm HSS Drill (Bulk Qty 10) YM0600L
6.0mm HSS Drill (W) YM0600W
6.5mm HSS Drill (Bulk Qty 10) YM0650L
6.5mm HSS Drill (W) YM0650W
7.0mm HSS Drill (Bulk Qty 10) YM0700L
7.0mm HSS Drill (W) YM0700W
7.5mm HSS Drill (Bulk Qty 10) YM0750L
7.5mm HSS Drill (W) YM0750W
8.0mm HSS Drill (Bulk Qty 10) YM0800L
8.0mm HSS Drill (W) YM0800W
8.5mm HSS Drill (Bulk Qty 10) YM0850L
8.5mm HSS Drill (W) YM0850W
9.0mm HSS Drill (Bulk Qty 10) YM0900L
9.0mm HSS Drill (W) YM0900W
9.5mm HSS Drill (Bulk Qty 10) YM0950L
9.5mm HSS Drill (W) YM0950W
10.0mm HSS Drill (Bulk Qty 5) YM1000L
10.0mm HSS Drill (W) YM1000W
10.5mm HSS Drill (Bulk Qty 5) YM1050L
10.5mm HSS Drill (W) YM1050W
INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
20
HSS 135º Flute GroundSplit Point Drill• Flute ground for greater accuracy.• Split point gives better starting and less wander.• Tempered for greater durability.• Greater penetration rates.• Shallow angle, better for sheet materials.
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 21
Size and Description Part No.
Size and Description Part No.
2.5mm HSS Drill - Long Series - 95mm long YM0250LLS
3.0mm HSS Drill - Long Series - 100mm long YM0300LLS
3.2mm HSS Drill - Long Series - 105mm long YM0320LLS
3.5mm HSS Drill - Long Series - 110mm long YM0350LLS
4.0mm HSS Drill - Long Series - 120mm long YM0400LLS
4.2mm HSS Drill - Long Series - 120mm long YM0420LLS
4.5mm HSS Drill - Long Series - 125mm long YM0450LLS
4.8mm HSS Drill - Long Series - 125mm long YM0480LLS
5.0mm HSS Drill - Long Series - 132mm long YM0500LLS
6.0mm HSS Drill - Long Series - 140mm long YM0600LLS
6.5mm HSS Drill - Long Series - 148mm long YM0650LLS
7.0mm HSS Drill - Long Series - 153mm long YM0700LLS
8.0mm HSS Drill - Long Series - 165mm long YM0800LLS
10.0mm HSS Drill - Long Series - 183mm long YM1000LLS
Size and Description Part No.
14.0mm Blacksmith Drill YBS1400X156
15.0mm Blacksmith Drill YBS1500X156
16.0mm Blacksmith Drill YBS1600X156
17.0mm Blacksmith Drill YBS1700X156
18.0mm Blacksmith Drill YBS1800X156
19.0mm Blacksmith Drill YBS1900X156
20.0mm Blacksmith Drill YBS2000X156
22.0mm Blacksmith Drill YBS2200X156
25.0mm Blacksmith Drill YBS2500X156
Size and Description Part No.
4.2mm HSS Split Point Drill (Bulk Qty 10) YMSP0420L
4.2mm HSS Split Point Drill (W) YMSP0420W
4.5mm HSS Split Point Drill (Bulk Qty 10) YMSP0450L
4.5mm HSS Split Point Drill (W) YMSP0450W
5.0mm HSS Split Point Drill (Bulk Qty 10) YMSP0500L
5.0mm HSS Split Point Drill (W) YMSP0500W
5.5mm HSS Split Point Drill (Bulk Qty 10) YMSP0550L
5.5mm HSS Split Point Drill (W) YMSP0550W
6.0mm HSS Split Point Drill (Bulk Qty 10) YMSP0600L
6.0mm HSS Split Point Drill (W) YMSP0600W
6.5mm HSS Split Point Drill (Bulk Qty 10) YMSP0650L
6.5mm HSS Split Point Drill (W) YMSP0650W
7.0mm HSS Split Point Drill (Bulk Qty 10) YMSP0700L
7.0mm HSS Split Point Drill (W) YMSP0700W
7.5mm HSS Split Point Drill (Bulk Qty 10) YMSP0750L
7.5mm HSS Split Point Drill (W) YMSP0750W
8.0mm HSS Split Point Drill (Bulk Qty 10) YMSP0800L
8.0mm HSS Split Point Drill (W) YMSP0800W
8.5mm HSS Split Point Drill (Bulk Qty 10) YMSP0850L
8.5mm HSS Split Point Drill (W) YMSP0850W
9.0mm HSS Split Point Drill (Bulk Qty 10) YMSP0900L
9.0mm HSS Split Point Drill (W) YMSP0900W
9.5mm HSS Split Point Drill (Bulk Qty 10) YMSP0950L
9.5mm HSS Split Point Drill (W) YMSP0950W
10.0mm HSS Split Point Drill (Bulk Qty 5) YMSP1000L
10.0mm HSS Split Point Drill (W) YMSP1000W
10.5mm HSS Split Point Drill (Bulk Qty 5) YMSP1050L
10.5mm HSS Split Point Drill (W) YMSP1050W
11.0mm HSS Split Point Drill (Bulk Qty 5) YMSP1100L
11.0mm HSS Split Point Drill (W) YMSP1100W
11.5mm HSS Split Point Drill (Bulk Qty 5) YMSP1150L
11.5mm HSS Split Point Drill (W) YMSP1150W
12.0mm HSS Split Point Drill (Bulk Qty 5) YMSP1200L
12.0mm HSS Split Point Drill (W) YMSP1200W
12.5mm HSS Split Point Drill (Bulk Qty 5) YMSP1250L
12.5mm HSS Split Point Drill (W) YMSP1250W
13.0mm HSS Split Point Drill (Bulk Qty 5) YMSP1300L
13.0mm HSS Split Point Drill (W) YMSP1300W
21
Long Series HSS
Blacksmith Drills• 118º point.• Reduced 1/2” shank.• Useful for hand held power tools.• Steam tempered finish.
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 22
Size and Description Part No.
98mm HSS Holesaw CH098
100mm HSS Holesaw CH100
102mm HSS Holesaw CH102
105mm HSS Holesaw CH105
108mm HSS Holesaw CH108
111mm HSS Holesaw CH111
114mm HSS Holesaw CH114
121mm HSS Holesaw CH121
127mm HSS Holesaw CH127
146mm HSS Holesaw CH146
152mm HSS Holesaw CH152
Electricians Holesaw Kit CH6SETELHEX
Plumbers Holesaw Kit CH6SETPLHEX
9.5mm Hexagon Shank Arbour CHD16-29HEX
SDS Plus Shank Arbour - Small CHD16-29SDS
13mm Hexagon Shank Arbour CHD32-64HEX
SDS Plus Shank Arbour - Large CHD32-64SDS
Holesaw Pilot Drill CHPD
Size and Description Part No.
4-22mm Step Drill EMWSD04-22
5-35mm Step Drill EMWSD05-35
Size and Description Part No.
14mm HSS Holesaw CH014
16mm HSS Holesaw CH016
19mm HSS Holesaw CH019
20mm HSS Holesaw CH020
22mm HSS Holesaw CH022
25mm HSS Holesaw CH025
29mm HSS Holesaw CH029
32mm HSS Holesaw CH032
35mm HSS Holesaw CH035
38mm HSS Holesaw CH038
40mm HSS Holesaw CH040
41mm HSS Holesaw CH041
44mm HSS Holesaw CH044
45mm HSS Holesaw CH045
46mm HSS Holesaw CH046
50mm HSS Holesaw CH050
51mm HSS Holesaw CH051
52mm HSS Holesaw CH052
54mm HSS Holesaw CH054
57mm HSS Holesaw CH057
60mm HSS Holesaw CH060
64mm HSS Holesaw CH064
65mm HSS Holesaw CH065
67mm HSS Holesaw CH067
70mm HSS Holesaw CH070
73mm HSS Holesaw CH073
76mm HSS Holesaw CH076
79mm HSS Holesaw CH079
83mm HSS Holesaw CH083
86mm HSS Holesaw CH086
89mm HSS Holesaw CH089
92mm HSS Holesaw CH092
95mm HSS Holesaw CH095
INNOVATIVE DRILLING & TOOL SOLUTIONS
www.armeg.co.uk
22
Holesaws• Bi-Metal holesaws feature bonded construction
• Provides greater efficiency and uninterrupted cutting of a wide range of machinable materials.
• Including wood, plastics, cast ironstainless steel, brass, bronze and aluminium.
• Ideal for production and maintenanceapplications in the electrical and building trades.
• Specifically for producing installationholes through floors and partitions.
Holesaw Set• ELECTRICIANS SET
16.0, 20.0, 25.0, 32.0, 40.0, 51.0mm 16mm to 29mm & 32mm to 64mmHexagon Shank Arbour.
• PLUMBERS SET19.0, 22.0, 29.0, 38.0, 44.0, 54.0mm. 16mm to 29mm & 32mm to 64mm Hexagon Shank Arbour.
CH6SETPLHEX
Step Drills• Produces round, burr-free holes in materials up to 5mm thick.• Up to 13 conventional drill sizes on one tool.• Holes deburred by same operation.• Chatter free, controlled drilling. • Easily enlarges existing holes.• Non-slip point, no need for pilot. • Shank will not slip in chuck.• Stronger more rigid - no flexing of drill whilst drilling.• Drills diameters from 5 mm to 35mm
_Drilling brochure new_Layout 1 06/09/2011 11:41 Page 23
Size and Description Part No.
60mm LDX Carbide Holesaw - Long Series LDXM060LS
65mm LDX Carbide Holesaw - Long Series LDXM065LS
75mm LDX Carbide Holesaw - Long Series LDXM075LS
Pilot Drill for LDX Metal - Short Series LDXMPILSS
Pilot Drill for LDX Metal - Long Series LDXMPILLS
Spring for LDX Metal - Short Series LDXMSPRSS
Spring for LDX Metal - Long Series LDXMSPRLS
Grub Screw for LDX Metal Holesaws LDXMGS
Size and Description Part No.
No. 1 Screw Extractor No.1 SCREW
No. 2 Screw Extractor No.2 SCREW
No. 3 Screw Extractor No.3 SCREW
No. 4 Screw Extractor No.4 SCREW
No. 5 Screw Extractor No.5 SCREW
No. 6 Screw Extractor No.6 SCREW
No. 7 Screw Extractor No.7 SCREW
No. 8 Screw Extractor No.8 SCREW
No. 9 Screw Extractor No.9 SCREW
Screw Extractor Set 1 to 5 Set A
Screw Extractor Set 1 to 6 Set B
Screw Extractor Set 7 to 9 Set E
Size and Description
Size and Description Part No.
14mm LDX Carbide Holesaw - Short Series LDXM014SS
16mm LDX Carbide Holesaw - Short Seres LDXM016SS
20mm LDX Carbide Holesaw - Short Series LDXM020SS
22mm LDX Carbide Holesaw - Short Series LDXM022SS
25mm LDX Carbide Holesaw - Short Series LDXM025SS
32mm LDX Carbide Holesaw - Short Series LDXM032SS
14mm LDX Carbide Holesaw - Long Series LDXM014LS
16mm LDX Carbide Holesaw - Long Series LDXM016LS
18mm LDX Carbide Holesaw - Long Series LDXM018LS
19mm LDX Carbide Holesaw - Long Series LDXM019LS
20mm LDX Carbide Holesaw - Long Series LDXM020LS
22mm LDX Carbide Holesaw - Long Series LDXM022LS
25mm LDX Carbide Holesaw - Long Series LDXM025LS
28mm LDX Carbide Holesaw - Long Series LDXM028LS
30mm LDX Carbide Holesaw - Long Series LDXM030LS
32mm LDX Carbide Holesaw - Long Series LDXM032LS
33mm LDX Carbide Holesaw - Long Series LDXM033LS
35mm LDX Carbide Holesaw - Long Series LDXM035LS
38mm LDX Carbide Holesaw - Long Series LDXM038LS
40mm LDX Carbide Holesaw - Long Series LDXM040LS
41mm LDX Carbide Holesaw - Long Series LDXM041LS
45mm LDX Carbide Holesaw - Long Series LDXM045LS
50mm LDX Carbide Holesaw - Long Series LDXM050LS
51mm LDX Carbide Holesaw - Long Series LDXM051LS
54mm LDX Carbide Holesaw - Long Series LDXM054LS
55mm LDX Carbide Holesaw - Long Series LDXM055LS
23
Screw Extractors• For extracting broken screws or studs by inserting the
extractor into a pre-drilled hole and turning anti-clockwise
Screw Extractor Set
Set A
The Ultimate Solution to Drilling Thick & Thin Metal
• Special tungsten carbide teeth, excellent wear and heatresistance.
• One piece construction, no assembly required.
• Short SeriesFor cutting steel plate, iron, aluminium, copper, cast iron, stainless, FRP (ie, fibreglass)and plastics up to 4.75mm thick.
• Long SeriesFor cutting pipe, thick steel, steel plate, iron, aluminium, copper, cast iron andstainless steel up to 25mm thick.
_Drilling brochure new_Layout 1 06/09/2011 11:42 Page 24
PlumbingJaw Dropper - Access wrench for tightening taps without isolating the water supply.
PHI Wrench Set - Plumbing and HeatingInstallation set for isolator valve installation, complete radiator dressing &boiler installation.
PIPE CHAMFERING TOOL
Grip Fast - One handed water pumppliers.
Pipe Chamfering Tool -For chamfering waste and soil pipes in seconds.
LOCK JAW - Self adjusting locking pliers,automatically lock to any size.
DrillingCore Drilling - Hi-speed masonry, Professional masonry, Dry diamond &Extra long high speed masonry core drills.Full range of accessories available.
Wood Drilling - Wood Beaver next generation wood drill. Flat wood bit, SDSPlus and Hexagon wood augers.
Metal Drilling - LDX metal the ultimatesolution to drilling thick and thin metal.HSS flute ground split point, HSS longseries, Blacksmith Drills & Holesaws.
ElectricalAdjustable Hole Cutter
Electrical Box Sinker - The original EBS square hole drilling system now including a dust collectionunit.
Channelling Chisels - Run accurate channels in seconds.
SDS Plus Scutch Comb Chisel
Solid Board Cutter - Carbide - Drill easy fix access holes in solid boardsin under a minute
Cable Guide - The multi-functionalcable routing tool.
Cable Guide Drill - For cavity walls.The one tool solution to cable guiding.
TilingPTC Soft Tile - Softer tile drilling.
PTC Diamond Grit - Diamond basedtile drills for fixing sizes.
PTC Carbide - The solution to non-slipinstant start-up. Now with bullet designto increase life.
PTC Diamond - The solution to durability& extended life.
PTC Water Delivery - The solution towater delivery when drilling porcelain.
Tile Removing Chisel
PTC Diamond Blades - The solution to cutting porcelain & softer tiles.
ARMEG Limited, Callywhite Lane, Dronfield, S18 2XJ, England.Telephone: +44 (0)1246 411081 Fax: +44 (0)1246 411882 Email: [email protected] www.armeg.co.uk
Specials Manufacturing ServiceItems made to your specifications. Contact us for more details.
SDS Plus Hammer Drill Bits - Premium and standard range.
SDS Max Hammer Drill Bits -Single tip & cross head design.
SDS Plus Points & Chisels -Mortar rake chisel, Brick removing chisel,Tile removing chisel, Hard material chisel.
R1-Rebar - The solution to drilling rebar.
Professional and Standard MasonryDrill Bits
_Drilling brochure new_Layout 1 06/09/2011 11:40 Page 1
