TOUGHER > FASTER > SIMPLER

DRILL MORE HOLES

WATSONUSA.COM800-927-8486

4300138,000 ft-lb, 187 kNm

SPIN OFF 100 rpm

LINEPULL 40,000 lb, 178 kN

WEIGHT 107,000 lbs, 48 mT

MAX DEPTH 160 ft, 56 m

a company

MODEL 4300

150-6/18 © 2018 Watson, Inc.

4015 South FreewayFort Worth, Texas 76110

Fax 817-927-8716sales@watsonusa.com

DEFINING FEATURES

Tri-Drive Rotary achieves max torque and max spinoff without clutches or gear shifting

Dual Rotary Positioning Cylinders provide 25’ of rotary clearance and easy setup

Full Travel Top Crowd drills straighter holes in less time with no outer bar locks

Big Tool Clearance 9’ (2.7m) tool diameter around the tracks with 60” (1.5m) dia up the mast

Interchangable Heavy Duty Kellys, swap square & round kellys to match drilling conditions

Controlled freefall with single layer grooved drum for faster cycle times & less rope wear

One Piece Load & Zero Setup enhances mobility with kellys on board and no specialty permits

Swing Out Operator’s Cab increases safety with optimal view of hole, winches and offside

Pilot Controls replace all electronics to provide superior controls and fewer headaches

STANDARD OPTIONS

Two mast heights and multiple kelly bar options available to meet specific drill depth needs

Bluetooth speakers | USB charging ports | 120V Power outlets | PA system | Camera system

Reaction jack installation (Crawler Only) | Quick detach mast

Sectional casing drive adapter | Integrated air bars | CFA conversion available upon request

PERFORMANCEPOWER . . . . . . . . . . . . . . . . . .250 hp

186 kW

TORQUE . . . . . . . . . . . . . . . . .138,000 ft-lb

187 kNm

SPIN OFF . . . . . . . . . . . . . . . . .100 rpm

KELLY WINCH . . . . . . . . . . . .40,000 lbs

With FREEFALL 178 kN

SERVICE WINCH . . . . . . . . . . .18,000 lbs

80 kN

CROWD FORCE . . . . . . . . . . . .50,000 lbs

222 kN

CONFIGURATIONTRUCK BASE . . . . . . . . . . . . . .10X4 Carrier

TRUCK WEIGHT . . . . . . . . . .100,000 lbs

45,360 kgs

CRAWLER WEIGHT . . . . . . . .107,000 lbs

48,534 kgs

DRILLING DEPTH 160 ft

(4-ELEMENT) 56 m

CROWD STROKE . . . . . . . . . .40 ft

12.1 m

SIDE TILT . . . . . . . . . . . . . . . .7º left/right