Refer to the Dreal™ system Instructions for Use (IFU) fordetailed instructions on motor and irrigation setup

drea ™

drea ™

OR Setup Guide

50ccor larger

IV bag

Motorhandpiece(foot operated)

Refer to Model SelectionGuide for advice on theproper tip con�guration.

Must be sterilizedprior to use.

StandardSterile tubing

Luerlock

Roller-clamp

Should be placed in the sterile �eld, within the surgeon’s reach; Dripping rate of ~1drop/sec provides enough irrigation to keep the tip from heating and allows debris to wash away.Length should allow the

surgeon to work conveniently or an extension may be used.

The Dreal™ is intended to cut bone in neurosurgical and spinal applications. Prior to use, the surgeon should refer to the product Instructions for Use (IFU)

for complete indications, warnings, precautions and contraindications.

The Dreal™ system can be powered by electric or pneumatic motors compatible with an ISO 3964 (‘micro’) connection or using appropriate adaptors. The motor system is not included and not part of the device.Refer to the IFU for instructions on motor preparation and setup.

Compatible driving systems cleared for Neuro and Spine surgery in the US include:Stryker CORE/TPS with Micro Drill or Rem B handpiecesMedtronic® Midas REX Legend™ with Carevature AdaptorDePuy Synthes Anspach™ Xmax, MicroMax Plus, eMax 2/eMax 2 Plus with Carevature AdaptorAesculap microspeed with GD678/679 handpiece

MKT

028

01

Driving the Dreal™

Carevature® and Dreal™ are Registered Trademarks of Carevature Medical Ltd.

Carevature Medical, Inc. | 190 Industrial Road, Suite 2, Wrentham, MA 02093 U.S.www.carevature.com | Customer Services: 1-855-201-5770 | customer_service@carevature.com