Embed Size (px)
Citation preview
Syllabus of the Module T T-I
For the trade
DRAUGHTSMAN MECHANICAL
UNDER
CRAFT INSTRUCTOR TRAINING SCHEME
TRADE TECHNOLOGY-I
(T T-I)
Duration:- 3 Months
Revised in - 2012
Government of India
Ministry of Labour & Employment
Directorate General of Employment & Training
CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
EN-81, Sector-V, Salt Lake City, Kolkata-700091
List of members attended in the “WORKSHOP” for revision of syllabi for various modules under
Craft Instructor Training Scheme (CITS) held at Central Staff Training & Research Institute
(CSTARI), Kolkata on dated 02.08.12
Sl. No. NAME & DESIGNATION
S/Shri./Smt.
ORGANISATION REMARKS
1. R.N. BANDYOPADHYAY,
DIRECTOR
CSTARI, KOLKATA Chairman
2. K.L. KULI, JDT CSTARI, KOLKATA Member
3. ABHINOY NANDI, DDT ATI, MUMBAI Member
4. JAYAN JOHN, VICE
PRICIPAL
DIRECTORATE OF
TRAINING KERALA
Member
5. A.V. BALACHANDRAN
ACHARY, VICE PRICIPAL
DIRECTORATE OF
TRAINING KERALA
Member
6. A.K. DUTTA, ADT ATI, KOLKATA Member
7. T.K. GHOSH, TO CSTARI, KOLKATA Member
8. C.S. MURTHY, DDT ATI-EPI ,HYDERABAD Member
9. M.S. EKAMBARAM, DDT ATI-EPI, HYDERABAD Member
10. MRINMAY SAMANTA,
PRINCIPAL
DIT, WEST BENGAL Member
11. SHRIKANT SONAVANE, T.O. ATI, MUMBAI Member
12. A.K. MANDAL, ADT ATI, KOLKATA Member
13. D.K. CHATTOPADHYA, TO ATI, KOLKATA Member
14. AMRIT PAL SINGH, DDT DGET (HQ),NEW DELHI Member
15. ASHIS CHAKRABORTY CSTARI, KOLKATA. Member
16. PRONAB PARUI TIT DEPT., W. BENGAL Member
17. SUBRATA GHOSH TIT DEPT., W. BENGAL Member
18. HARDHAN DAS, TO CSTARI, KOLKATA. Member
19. TAPAN KR. HALDAR ATI, KOLKATA Member
20. L.K. MUKHERJEE, DDT CSTARI, KOLKATA Member
21. NIRMALYA NATH, ADT CSTARI, KOLKATA Member
22. K.N. HALDER, DDT CSTARI, KOLKATA. Member
23. R.N. MANNA, TO CSTARI, KOLKATA Member
24. MOHAN SINGH, TO CSTARI, KOLKATA Member
25. P. BISWAS, D/MAN CSTARI, KOLKATA Member
26. HEMANT KUJUR, D/MAN CSTARI, KOLKATA Member
GENERAL INFORMATION
1. Name of the Trade : Draughtsman Mechanical
2. N. C. O. Code No. :
3. Name of the Module : Trade Technology – I
4. Duration : 03 Months
5. Entry Qualification: (a) National Trade Certificate in the relevant trade OR
(b) National Apprenticeship Certificate in the Relevant trade
OR
(c) Diploma in the relevant branch of Engineering
6. Batch Size : 20 Trainees
7. Space Norms : (a) Class Room : 30 Sq. Mt.
(b) Drawing Hall : 100 sq. meter.
8. Power Norms : (a) Class Room : 1 kw (6000 lumen)
(b) Drawing Hall : 5.5 kw (25000 lumen) (The electrical equipment of class room should conform to minimum 3 star Building energy rating as per Bureau of Energy Efficiency (B.E.E.)
9. Trainer’s Qualification: (a) Academic Qualification :- 10th
class pass or equivalent.
(b) Technical Qualification : Degree in appropriate branch of
engineering from recognized University
OR
Three year Diploma in appropriate branch of engineering
from recognized Board / Institution. In case of two units,
one trainer must be Degree in Engineering.
(c) Passed National Craft Instructor Training course in same
or relevant trade.
(d) Experience : Two years for Degree holder and Five
years for Diploma holder and NCIT as an Instructor.
COURSE STRUCTURE
Module :- TRADE TECHNOLOGY- I
(TT-I)
Sl.
No. Components Units
Allotted
Time/week
Allotted
Time/module
1. Trade Technology a) Theory 14 hrs/wk 14x13=182hrs
b) Practical 25hrs/wk 25x13=325hrs
2. Library C) Library 1hr/wk 1x13=13hrs
40hrs. / wk 520 hrs. / module
Duration: 3 Months.
REVISED SYLLABUS OF
TRADE:- DRAUGHTSMAN MECHANICAL
MODULE :- TRADE TECHNOLOGY –I (TT-I)
UNDER CRAFT INSTRUCTOR TRAINING SCHEME
WEEK
NO THEORY PRACTICAL
01 Importance of trade in the development
of industry. Environmental occupational
and safety hazards specific to the trade
like electrical, computer and related shop
floor hazards. Role of B.I.S and
International Standards like B.I.S, B.S,
DIN, JIS, ASTM, AAR. etc. their uses.
Indian standards and awareness of other
International Standards.
Construction of different types of scales&
their uses, scale R.F.
Definition of development & its need in
industry. Different methods of surface
development.
Conventional representation and
different rule as per B.I.S and other
International Standards and there
equivalent i.e B.I.S,
Use the I.S. code of Practical following
SP-46 : 2002 / latest
Practice on geometrical const.,
Scales: plain, diagonal. comparative,
vernier
Isometric and scale of chords.
Development of surfaces.
02 General principles of dimensioning on
engineering drawing.
General principle of projection and its
classification.
Methods of Development. Sections of
solids, Intersection of solids.
Dimension techniques and its
application.
03
Importance of sectional views, types of
sectional views and there uses. Types of
fasteners and there uses.
Orthographic projection. of machine
parts & vice-versa.
.
Practice on sections and conventions
04 Screw threads term and nomenclature.
Types of rivets and riveted joint.
Description of welding joints and their
representation (actual and symbolic)
Indication of welding symbols on
drawing as per I.S.
Screw thread and their representation
in drawing.
Practice on different types of riveted
and welded joints.
05 Classification of bearing, difference
between Frictional and anti-frictional
bearing and its Advantages &
Disadvantages.
Details & assembly drawing of solid
/bushed bearing, footstep bearing,
plumber block etc.
06 Brief description of different types pipes
and tubes, purpose of pipe fitting,
pressure ratings, joints and their fittings.
Pipe material and specification. Boiler
Different types of pipe layout, pipe
joints, pipe fittings, flange, union etc.
Different piping drawing i.e developed
drawing diametric drawing &
mountings and accessories. Different
parts of I.C engine and there purposes.
Working principle of 2-stroke and 4-
stroke engine. Different types of cam and
followers used in industry, kinds of
motion displacement diagram.
orthographic projection.
Drawing of cams and followers with
different motion.
07 Brief description and function of
centrifugal and reciprocating pump.
Different types of valves and their
function.
Brief description working principles and
function of screw jack.
Assembly drawing of different types of
pumps (centrifugal & reciprocating),
valves and safety valves.
Assembly and details drawing of screw
jack.
08 Different types of jig and fixture. Section
of standard bush. Different locating
methods and clamping devices. Function
of gauges, different types of gauges and
there uses. Use of template in industry.
Press tool. compound and progressive
die.
Detail drawing of a milling fixture.
Design and drawing of drilling jig.
Sketching of different types of gauges
such as plug, snap, thread, taper etc.
Drawing of different types of press
tool
09 ALLIED TRADE: OVERVIEW
M.M.V
Brief description of I.C engine and its
parts such as cylinder block, piston,
connecting rod, cam shaft, carburettor,
spark plug, Fuel Injection pump, etc.
ALLIED TRADE: OVERVIEW
SHEET METAL WORKER
Names and description of common
equipments. Different types and uses of
joint employed in sheet metal work.
ALLIED TRADE: OVERVIEW
WELDER (G & E)
Different types of welding and welding
joints and symbols as per BIS. Surface
and edge preparation required for
welding.
Familiarisation and identification of
different parts of I.C engine. Both
spark ignition and compression
ignition: 2-stroke & 4-stroke engines.
Familiarisation with arc welding and
gas welding, welding torch, electrodes,
filler wires, tools used in the trade.
10
to
12
PRACTICAL RELATED THEORY
Introduction to computer. Introduction to CAD, graphical area setting (drawing
setting), familiarisation about different co-ordinate system, and commands (use
of different menus and different tool bar). Preparation of 2D drawing using
Auto-CAD commands. Editing of drawing using different options under modify
menu. Creating dimensions of drawing with the help of dimension menu tool
bar. Creating Layer management, (application of different layers for and
creating drawing).. Familiarization with adding text to drawing. Creating
sectional drawing using different patterns. Editing objects through properties
bar. Layout management (model space environment for creating and editing of
drawing/paper space environment).
Industrial cum study tour in different industries (at least two) having drawing &
design office with required facilities.
Project work and Industrial Visit related to the trade (2 days).
13 Revision &
FINAL EXAMINATION
NOTE : For allied trades (Week No. 9 ) Training / Industrial visit may be arranged in the relevant
industries, if the allied trade facilities are not available in the institute.
LIST OF TOOLS & EQUIPMENT FOR A BATCH OF 20 TRAINEES
Trade: DRAUGHTSMAN MECHANICAL
Module : TT-I
SL.NO. DESCRIPTION QUANTITY
Trainees Kit
1 Drawing Instrument Box with accessories. 20+1 sets
2 Set square celluloid 45 (250x1.5mm) 20+1 sets
3 Set square celluloid 60 (250x1.5mm) 20+1 sets
4 French-curves (set of 20 celluloid) 20+1 sets
5 Drawing Board (700 x 500) IS:1444 20+1 sets
6 Tee-Square (700 mm blade) IS:1360 20+1 sets
7 Mini Drafter 20+1 sets
General Outfit
1A) Computer 3GHz or latest with 1GB or higher RAM with
compatible motherboard DVD combo drive with latest x
version, hard disk with 500 GB or above, 19″ TFT
Monitor,1 GB AGP card, 10/100 Ethernet card, Internal
modem, UPS with 800 VA / Latest Version
11 nos.
B) Software: MS-Office, OS-XP or latest version of operating
software, Auto-CAD with latest version.
11 users
licensed
C) Printer Latest model –A3 Print, Copy and Scan
1200x1200dpi, 16MB
1 no.
D) UPS-10KVA 1 no.
2 Chest of drawers (8 drawers) 2 nos.
3 Trainees Locker (8 drawers ) 3 nos.
4 Book Self 2 nos.
5 Steel tape 2 meters (Pull type) 1 nos.
6 Drawing table for A1 sheet 20+1 nos.
7 Stools (revolving type) adjustable height up to 2Ꞌ 20+1 nos.
8 Print Trimmer 1050 mm cutting edge 1 no.
9 T.O’s Table 6ftX4ft 1 no.
10 T.O’s Chair Armed chair - Revolving 1 no.
11 Almirah Steel 6ft. height or higher 2 nos.
12 Computer table 11 nos.
13 Computer chairs - Revolving 21 nos.
14 Table for printers 1 no.
15 D.L.P Projector 2000 LUMEN OR HIGHER 1 no.
16 Motorised Screen for Projection 1 no.
17 White board 6FT. x 4FT. 1 no.
18 Fire Fighting Equipments As required
19 First Aid Box 1 no.
Syllabus of the Module – TT-II
For the trade
DRAUGHTSMAN MECHANICAL
UNDER
CRAFT INSTRUCTOR TRAINING SCHEME
TRADE TECHNOLOGY-II
(T T-II)
Duration:- 3 Months
Designed in - 2012
Government of India
Ministry of Labour & Employment
Directorate General of Employment & Training
CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
EN-81, Sector-V, Salt Lake City, Kolkata-700091
List of members attended in the “WORKSHOP” for revision of syllabi for various modules under
Craft Instructor Training Scheme (CITS) held at Central Staff Training & Research Institute
(CSTARI), Kolkata on dated 02.08.12
Sl. No. NAME & DESIGNATION
S/Shri./Smt.
ORGANISATION REMARKS
1. R.N. BANDYOPADHYAY,
DIRECTOR
CSTARI, KOLKATA Chairman
2. K.L. KULI, JDT CSTARI, KOLKATA Member
3. ABHINOY NANDI, DDT ATI, MUMBAI Member
4. JAYAN JOHN, VICE
PRICIPAL
DIRECTORATE OF
TRAINING KERALA
Member
5. A.V. BALACHANDRAN
ACHARY, VICE PRICIPAL
DIRECTORATE OF
TRAINING KERALA
Member
6. A.K. DUTTA, ADT ATI, KOLKATA Member
7. T.K. GHOSH, TO CSTARI, KOLKATA Member
8. C.S. MURTHY, DDT ATI-EPI ,HYDERABAD Member
9. M.S. EKAMBARAM, DDT ATI-EPI, HYDERABAD Member
10. MRINMAY SAMANTA,
PRINCIPAL
DIT, WEST BENGAL Member
11. SHRIKANT SONAVANE ATI, MUMBAI Member
12. A.K. MANDAL, ADT ATI, KOLKATA Member
13. D.K. CHATTOPADHYA, TO ATI, KOLKATA Member
14. AMRIT PAL SINGH, DDT DGET (HQ), NEW DELHI Member
15. ASHIS CHAKRABORTY CSTARI, KOLKATA. Member
16. PRONAB PARUI TIT DEPT., W. BENGAL Member
17. SUBRATA GHOSH TIT DEPT., W. BENGAL Member
18. HARDHAN DAS, TO CSTARI, KOLKATA. Member
19. TAPAN KR. HALDAR ATI, KOLKATA Member
20. L.K. MUKHERJEE, DDT CSTARI, KOLKATA Member
21. NIRMALYA NATH, ADT CSTARI, KOLKATA Member
22. K.N. HALDER, DDT CSTARI, KOLKATA. Member
23. R.N. MANNA, TO CSTARI, KOLKATA Member
24. MOHAN SINGH, TO CSTARI, KOLKATA Member
25. P. BISWAS, D/MAN CSTARI, KOLKATA Member
26. HEMANT KUJUR, D/MAN CSTARI, KOLKATA Member
GENERAL INFORMATION
1. Name of the Trade: Draughtsman Mechanical
2. N. C. O. Code No. :
3. Name of the Module : Trade Technology – II
4. Duration : 03 Months
5. Entry Qualification : (a) same as trade Technology – I and
(b) completed training in TT-I module of
the relevant trade of modular pattern
of craft Instructor’s Training Scheme
(CITS)
6. Batch Size : 20 Trainees
7. Space Norms : (a) Class Room : 30 Sq. Mt.
(b) Drawing Hall : 100 sq. meter.
8. Power Norms : (a) Class Room : 1 kw (6000 lumen)
(b) Drawing Hall : 5.5 kw (25000 lumen) (The electrical equipment of class room should conform to minimum 3 star Building energy rating as per Bureau of Energy Efficiency (B.E.E.)
9. Trainer’s Qualification: (a) Academic Qualification :- 10th
class pass or equivalent.
(b) Technical Qualification : Degree in appropriate branch of
engineering recognized University
OR
Three year Diploma in appropriate branch of engineering
from recognized Board / Institution. In case of two units,
one trainer must be Degree in Engineering.
(c) Passed National Craft Instructor Training course in same
or relevant trade.
(d) Experience : Two years for Degree holder and Five years
For Diploma holder and NCIT as an Instructor.
COURSE STRUCTURE
Module :- TRADE TECHNOLOGY- II
(TT-II)
Sl.
No. Components Units
Allotted
Time/week
Allotted
Time/module
1. Trade Technology a) Theory 14 hrs/wk 14x13=182hrs
b) Practical 25hrs/wk 25x13=325hrs
2. Library C) Library 1hr/wk 1x13=13hrs
40hrs. / wk 520 hrs. / module
Duration: 3 Months
REVISED SYLLABUS OF
TRADE:- DRAUGHTSMAN MECHANICAL
MODULE :- TRADE TECHNOLOGY –II (TT-II)
UNDER CRAFT INSTRUCTOR TRAINING SCHEME
WEEK
NO THEORY PRACTICAL
01 Types of assembly drawings, preparing
& planning of assembly drawings.
Elements of production drawing.
Practice of detailed & assembly drawings
of the components of different machine and
machine parts.
02
Interchangeability - its terms as per IS
and applications. Limits, fits, tolerances
(including geometrical), allowance,
deviation. Method of indicating surface
texture on technical drawing.
Types of geometrical & dimensional
tolerance.
tolerance in hole basis and shaft basis
system. Terminology for surface
roughness system & selection of fit.
Representation of tolerances on drawing.
Drawing of Keys, Cotters, Flanges.
Drawing practice for method of indicating
surface texture on technical drawing.
Representation of surface roughness on
drawing.
03 Transmission of power by belt, gear,
pulleys, chain and couplings.
Calculation for gear data for spar,
helical, bevel gears, and worm & worm
wheel.
Drawing of different types of pulleys.
Working drawing of coupling and knuckle
joint. drawing of gears (spur, helical &
bevel) worm and worm wheel.
04 Symbolic representation of welds on
structural work.
Detailed drawing of different types of
welded joints used in industries.
05 Engineering Inspection & inspection
techniques. Calculation of least count
and measurement practice using
micrometer, vernier calliper, and bevel
protector.
Draw component drawing (sample
component) as per actual dimension using
different precision measuring instruments
& gauges.
06 Difference between Conventional &
CNC machining system.
Working principles of CNC machines.
Demonstrations on CNC machines.
07
&
08
ALLIED TRADE: OVERVIEW
FITTER:
Description and application of simple
hand tools, cutting tools and measuring
instruments etc.
Familiarisation with fitter related skills.
Different types of hand tools, cutting tools
and measuring instruments used in
marking, preparing & fitting.
.
ALLIED TRADE: OVERVIEW
TURNER
Lathe – its types, parts, accessories,
tools, tool materials and different
operations.
ALLIED TRADE: OVERVIEW
MACHINIST:
Description of shaping, planning &
milling machines, their parts,
accessories and different mechanism
and operations.
.
Familiarisation with plain, step, boring and
taper turning, thread cutting.
Familiarisation with simple operations on
milling and shaping machine.
09
to
11
Analyzing the drawing using inquiry option. Creating isometric drawing from
orthographic views. 3D modelling concept in Auto-CAD. Understanding about
viewpoint and UCS. Wire frame modelling, solid modelling & editing. Mesh
modelling and editing. Create and managed 2D views from 3D models. Concept about
import and export.
Project work and Industrial Visit related to the trade (2 days).
12 Overview of programming & operation of CNC.
Concept on CAD-CAM.
13 Revision &
FINAL EXAMINATION
LIST OF TOOLS & EQUIPMENT FOR A BATCH OF 20 TRAINEES
Trade: DRAUGHTSMAN MECHANICAL
Module : TT-II
SL.NO. DESCRIPTION QUANTITY
Trainees Kit
1 Drawing Instrument Box with accessories. 20+1 sets
2 Set square celluloid 45 (250x1.5mm) 20+1 sets
3 Set square celluloid 60 (250x1.5mm) 20+1 sets
4 French-curves (set of 20 celluloid) 20+1 sets
5 Drawing Board (700 x 500) IS:1444 20+1 sets
6 Tee-Square (700 mm blade) IS:1360 20+1 sets
7 Mini Drafter 20+1 sets
General Outfit
1A) Computer 3GHz or latest with 1GB or Higher RAM with
compatible motherboard DVD combo drive with latest x
version, hard disk with 500 GB or above, 19″ sq. TFT
Monitor,1 GB AGP card, 10/100 Ethernet card, Internal
modem, UPS with 800 VA or Latest version
11 nos.
B) Software: MS-Office, OS- XP or latest version of
operating system, Auto-CAD or latest version.
11 users licenced
C) Printer Latest model (Print, Copy and Scan)
1200x1200dpi, 16MB – A3 size
1 no.
D) UPS-10KVA 1 no.
2 Chest of drawers (8 drawers) 2 nos.
3 Trainees Locker (8 drawers ) 3 nos.
4 Book Shelf 2 nos.
5 Steel tape 2 meters (Pull type) 1 nos.
6 Drawing table (A1 sheet) 20+1 nos.
7 Stools(Revolving and adjustable HEIGHT 2ʹtype) 20+1 nos.
8 Print Trimmer 1050 mm cutting edge 1 no.
9 T.O’s Table 6ft. X 4ft. 1 no.
10 T.O’s Chair – revolving type with Arm 1 no.
11 Almeria Steel 6 ft. 2 nos.
12 Computer table 11 nos.
13 Computer chairs (Revolving type) 21 nos.
14 CAD- cam software latest version 10 user license
15 Table for printers 1 no.
16 D.L.P Projector – 2000 LUMEN OR HIGHER 1 no.
17 Motorised screen for projector 1 no.
18 White board 6ft. X 4ft. 1 no.
19 Fire Fighting Equipments As required
20 First Aid Box 1 no.
FURNITURE, ACCESSORIES AND AUDIO VISUAL AIDS FOR
THE MODULES TT-I AND TT-II (COMMON FOR ALL ENGG. TRADES)
01 Class Room Chairs (armless) / Dual desk may also be allowed 20 /10
02 Class Room Tables ( 3ft X 2ft) / Dual desk may also be allowed 20 /10
03 Chair for Trainer (armed) movable 01
04 Table for Trainer (4 ½ ft X 2 ½ ft) with Drawer and cupboard 01
05 Projector 01
06 LATEST Multimedia Computer System with all accessories with
UPS (.5 KVA) 01 set
07 Computer Table 01
08 White Board (6ft X 4 ft.) 01 no.
09 DLP Projector Screen
10 Air Conditioner 1.5Ton (OPTIONAL) 02
11 Wall Clock 01 no.
12 Wall charts, Transparencies and DVDs related to the trade As required
13. Laser Printer with scanner 01
14. Steel Cupboard with 8 pigeon lockers 3
15. Work bench for fitters with two vices of 100mm 2
16. Steel cupboard 180x90x45cm 2
17. Steel cupboard 120x60x45cm 2
18. Multi drawer tool rack trolley with minimum 4 drawers and 20 tool capacity 04
19. First aid box. 1
LIST OF FURNITURE, ACCESSORIES AND AUDIO VISUAL AIDS FOR
AUDIO VISUAL LAB (COMMON FOR ALL ENGG. TRADES)
01 Class Room Chairs (armless) / Dual desk may also be allowed 30 /15
02 Class Room Tables ( 3ft X 2ft) / Dual desk may also be allowed 30 /15
03 Chair for Trainer (armed) movable 01
04 Table for Trainer (4 ½ ft X 2 ½ ft) with Drawer and cupboard 01
05 LCD Projector 01
06 Multimedia Computer System with all accessories with UPS (.5
KVA) 01 set
07 Computer Table 01
08 White Board (6ft X 4 ft.) 01 no.
09 LCD Projector Screen
10 Air Conditioner 1.5Ton (OPTIONAL) 02
11 Wall Clock 01 no.
12 Wall charts, Transparencies and DVDs related to the trade As required
13 Document Camera / Visualiser 01
14 Smart Board / Inter Active Board 01
15 Over Head Projector 01
16 Video Camera with stand 01
17 Printer cum Scanner 01
Guidelines for setting up of paper under CITS (TT-I & TT-II) Total Marks: 75
DEPTH OF QUESTIONS
Sl. No. Content % to be followed Marks breakup
1 BASICS 20 15
2 CORE 60 45
3 ADVANCED 20 15
BREAKUP OF QUESTION AS PER THE CONTENT
TYPE-I
15QX1M=15M
TYPE-II
15QX2M=30M
TYPE-III
6QX5M=30M
BASICS 3QX1M=3M 3QX2M=6M 1QX5M=5M
CORE 9QX1M=9M 9QX2M=18M 4QX5M=20M
ADVANCED 3QX1M=3M 3QX2M=6M 1QX5M=5M
QUESTION PATTERN
TYPE PATTERN
MARK
DISTRIBUTION TOTAL MARKS
TYPE-I TRUE/FALSE 5QX1M=5M
15M MULTIPLE CHOICE 10QX1M=10M
TYPE-
II
SHORT ANSWER QUESTION 15QX2M=30M 30M
TYPE-
III LONG ANSWER QUESTION 6QX5M=30M 30M
CHOICE FOR ANSWERING
TYPE TOTAL QUESTIONS No. OF CHOICE MARKS
TYPE-I 15 NO CHOICE 15
TYPE-II 15 20 30
TYPE-III 6 9 30
TIME ALLOTMENT(in minutes)
TIME ALLOTED FOR TIME(in minutes)
GENERAL READING 10
TYPE-I 30
TYPE-II 60
TYPE-III 70
REVISION 10
TOTAL TIME 180
