Upload
others
View
4
Download
1
Embed Size (px)
Citation preview
Pumps for:
including:
Drainage
Sewerage
Treatment
Valves
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Sump Pumps
Samson Auto / Goliath Auto
14 m
12
10
8
6
4
2
0l/min
0 40 80 120 160 200 240 280 320 360
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com2
Automatic Sump Pumps, with compact size requiring asmall floor sump or pit. Stainless steel motor casings andengineering plastics provide corrosion resistance androbust construction. Goliath Super and Samson have ashrouded float switch allowing installation within a250mm square sump.PU and Goliath Super both feature excellent 35mmsolids-handling, with recessed impellers giving goodcapacity to handle fibrous material.Mechanical shaft seals on each pump type.Samson also available as non-auto.PU models also available with auto-coupling.Applications: PU:• Cellars • Silage effluents• Lift-shafts • Fish farms• Areas where nuisance • Industrial processes
water collects • Marine
Drainage
DRE
Economy Drainage Pumps
DRE Cut-away 400V
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE-No. PASSAGE mm 230V 400V length m kgs STANDING
1Ph 3Ph
Cast Iron230V 1PhDRE50/2/G32V 1 11/4" 10x20 0.4 2.8 10 11 PZ/0001.007DRE75/2/G32V 2 11/4" 10x20 0.6 3.8 10 13 PZ/0003.007DRE100/2/G50V 3 2" 10x20 0.9 6.5 10 19 PZ/0007.007DRE150/2/G50V 4 2" 10x20 1.1 8.2 10 20 PZ/0011.004DRE200/2/G50V 5 2" 10x20 1.5 9.3 10 21 PZ/0015.005400V 3PhDRE50/2/G32V 1 11/4" 10x20 0.4 0.9 10 11 PZ/0002.004DRE75/2/G32V 2 11/4" 10x20 0.6 1.3 10 13 PZ/0004.004DRE100/2/G50V 3 2" 10x20 0.9 2.0 10 19 PZ/0008.005DRE150/2/G50V 4 2" 10x20 1.1 2.5 10 20 PZ/0012.004DRE200/2/G50V 5 2" 10x20 1.5 3.6 10 21 PZ/0016.006
Automatic drainage pumps, for domestic and smallindustrial applications.Robust construction, with major components incast iron for long life. Mechanical seal fitted.Applications:• Cellar drainage• Subways• Industrial processes• Final effluent transfer
(Not suitable for ponds or water features)Free-standing only.We recommend that electrical overloadprotection is incorporated into the power supply. l/sec
0 2 4 6 8 10 12 14
20 m
18
16
14
12
10
8
6
4
2
0
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. mm PASSAGE mm 110V 230V 400V length m kgs STANDING COUPLING
1Ph 1Ph 3Ph
Stainless SteelSubmersible110V 1PhGoliath Super Auto 2 50 35 0.15 2.7 10 6.3 PT/GOLSUP/2 -230V 1PhGoliath Super Auto 2 50 35 0.15 1.4 10 6.3 PT/GOLSUP/1 -Samson 1 32 3 0.15 1.6 10 5.5 PX/SAMSON/1 -Samson Auto 1 32 3 0.15 1.6 10 5.8 PX/SAMSON/1A -
230V 1Ph50PU2.4 3 50 35 0.4 3 10 8.4 PT/50PU2.4/1 PT/50PU2.4/1/AC50PUA2.4 Auto 3 50 35 0.4 3 10 8.9 PT/50PUA2.4/1 PT/50PUA2.4/1/AC400V 3Ph50PU2.4 3 50 35 0.4 1.2 10 7.9 PT/50PU2.4/3 PT/50PU2.4/3/AC50PUA2.4 Auto 3 50 35 0.4 1.2 10 8.4 PT/50PUA2.4/3 PT/50PUA2.4/3/AC50PU2.75 4 50 35 0.8 1.8 10 9.6 PT/50PU2.75/3 PT/50PU2.75/3/AC50PUA2.75 Auto 4 50 35 0.8 1.8 10 10.1 PT/50PUA2.75/3 PT/50PUA2.75/3AC
PU AutoPU Auto-coupling
1 2 3 4
1 2 3 4 5
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
DRO
Small Drainage
DRO Impeller
20 m
18
16
14
12
10
8
6
4
2
0l/sec
0 2 4 6 8 10 12 14
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. PASSAGE mm 230V 400V length m kgs STANDING COUPLING
1Ph 3Ph
Cast Iron230V 1Ph Starter & Float includedDRO50/2/G32V 1 11/4" 10x20 0.4 2.9 10 15 PZ/DRO50/2/1 -DRO75/2/G32V 2 11/4" 10x20 0.6 3.9 10 15.5 PZ/DRO75/2/1 -DRO100/2/G50V 3 2" 10x20 0.9 6.5 10 19.5 PZ/DRO100/2/1 -DRO150/2/G50V 4 2" 10x20 1.1 8.2 10 20.5 PZ/DRO150/2/1 -DRO200/2/G50V 5 2" 10x20 1.5 9.3 10 21.5 PZ/DRO200/2/1 -DRO150/4/G50H 6 2" 10x20 0.9 6.3 10 25 PZ/DRO150/4/1 PZ/DRO150/4/1AC400V 3Ph Starter extraDRO50/2/G32V 1 11/4" 10x20 0.4 0.9 10 15 PZ/DRO50/2/3 -DRO75/2/G32V 2 11/4" 10x20 0.6 1.4 10 15.5 PZ/DRO75/2/3 -DRO100/2/G50V 3 2" 10x20 0.9 2 10 19.5 PZ/DRO100/2/3 -DRO150/2/G50V 4 2" 10x20 1.1 2.5 10 20.5 PZ/DRO150/2/3 -DRO200/2/G50V 5 2" 10x20 1.5 3.6 10 21.5 PZ/DRO200/2/3 -DRO150/4/G50H 6 2" 10x20 0.9 2.2 10 25 PZ/DRO150/4/3 PZ/DRO150/4/3AC
Stainless Steel230V 1Ph Starter & Float includedDRX50/2/G32V 1 11/4" 10x20 0.4 2.9 10 17 PZ/0045.003 -DRX75/2/G32V 2 11/4" 10x20 0.6 3.9 10 17 PZ/0047.003 -DRX100/2/G50V 3 2" 10x20 0.9 6.5 10 21 PZ/0049.003 -DRX150/2/G50V 4 2" 10x20 1.1 8.2 10 23 PZ/0051.003 -DRX200/2/G50V 5 2" 10x20 1.5 9.3 10 23 PZ/0053.003 -400V 3Ph Starter extraDRX50/2/G32V 1 11/4" 10x20 0.4 0.9 10 17 PZ/0046.001 -DRX75/2/G32V 2 11/4" 10x20 0.6 1.4 10 17 PZ/0048.001 -DRX100/2/G50V 3 2" 10x20 0.9 2 10 21 PZ/0050.001 -DRX150/2/G50V 4 2" 10x20 1.1 2.5 10 23 PZ/0052.001 -DRX200/2/G50V 5 2" 10x20 1.5 3.6 10 23 PZ/0054.001
Bronze230V 1Ph Starter & Float includedDRB50/2/G32V 1 11/4" 10x20 0.4 2.9 10 17 PZ/DRB50/2/1 -DRB75/2/G32V 2 11/4" 10x20 0.6 3.9 10 17 PZ/DRB75/2/1 -DRB100/2/G50V 3 2" 10x20 0.9 6.5 10 21 PZ/DRB100/2/1 -DRB150/2/G50V 4 2" 10x20 1.1 8.2 10 23 PZ/DRB150/2/1 -DRB200/2/G50V 5 2" 10x20 1.5 9.3 10 23 PZ/DRB200/2/1 -400V 3Ph Starter extraDRB50/2/G32V 1 11/4" 10x20 0.4 0.9 10 17 PZ/DRB50/2/3 -DRB75/2/G32V 2 11/4" 10x20 0.6 1.4 10 17 PZ/DRB75/2/3 -DRB100/2/G50V 3 2" 10x20 0.9 2 10 21 PZ/DRB100/2/3 -DRB150/2/G50V 4 2" 10x20 1.1 2.5 10 23 PZ/DRB150/2/3 -DRB200/2/G50V 5 2" 10x20 1.5 3.6 10 23 PZ/DRB200/2/3 -
Cast Iron Explosion-Proof230V 1Ph DRF75/2/G32V-EX 7 11/4" 10x20 0.6 4 10 28 PZ/DRF75/2/1 -DRF150/2/G50H-EX 9 2" 10x20 1.1 7.2 10 29 PZ/DRF150/2/1 -400V 3PhDRF75/2/G32V-EX 7 11/4" 10x20 0.6 1.5 10 28 PZ/DRF75/2/3 -DRF100/2/G50H-EX 8 2" 10x20 0.7 1.9 10 29 PZ/DRF100/2/3 -DRF200/2/G50H-EX 10 2" 10x20 1.5 3.8 10 30 PZ/DRF200/2/3 -Control Panel for Ex pumps available230V 1Ph400V 3PhNote: FLO-1 x 2 Float Switches will be required for Ex applications
The Small Drainage range is for heavy-duty use,with the pumps featuring cast construction,heavy-duty bearings and silicon carbidemechanical shaft seal. A choice of materials isavailable for a variety of liquids:Cast-iron: Subway, Industrial, Final effluentStainless Steel: Industrial, Processing, ChemicalBronze: Marine, IndustrialTwin mechanical seals installed.DRF-type, in cast-iron, has explosion-proof motorfor use in flammable liquids and potentiallyexplosive atmospheres.Free-standing; selected models only inauto-coupling.
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com3
Drainage
EExd
1 2 3
4
65
78 9 10
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Large Drainage Pumps
DRP Free-standing(discharge bend not shown)
Heavy-duty with open twin-channel impellers.Three mechanical seals and oil-filled motor.Specifically for professional / Industrial use,these pumps incorporate heavy-duty motorsand construction generally.Cast-iron and cast stainless steel versions.Free-standing and auto-coupling available.Applications:• Drainage schemes• Subways• Water features
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com4
Drainage
l/sec0 10 20 30 40 50 60 70 80
55 m
50
45
40
35
30
25
20
15
10
5
0
PLEASE NOTE:
OUR SALES DEPARTMENT WILL BE PLEASED TO ADVISE ON THE
MOST APPROPRIATE PUMP AND EQUIPMENT FOR YOUR APPLICATION.
DRP Impeller
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. mm PASSAGE mm 400V length m kgs STANDING COUPLING
3Ph
Cast Iron400V 3PhDRP300/2/80 1 80 56 2.7 6 10 52 PZ/0063.003 PZ/0063.003/ACDRP550/2/80 3 80 56 4.9 10 10 67 PZ/0067.004 PZ/0067.004/ACDRP750/2/80 4 80 63 7.2 15 10 100 PZ/0068.002 PZ/0068.002/ACDRP1000/2/80 5 80 65 10 20 10 105 PZ/0069.002 PZ/0069.002/ACDRP1500/2/80 6 80 60 15 28 10 128 PZ/DRP1500/80 PZ/DRP1500/80/ACDRP2000/2/80 7 80 54 19 36 10 158 PZ/0073.003 PZ/0073.003/ACDRP1000/2/100 8 100 80 10 20 10 108 PZ/0070.002 PZ/0070.002/ACDRP1500/2/100 9 100 80 15 28 10 130 PZ/DRP1500/100 PZ/DRP1500/100AC
Stainless Steel400V 3PhDRY300/2/80 1 80 56 2.7 6 10 51 PZ/0101.001 PZ/0101.001/ACDRY400/2/80 2 80 56 3.6 8 10 65 PZ/0103.001 PZ/0103.001/ACDRY550/2/80 3 80 56 4.9 10 10 72 PZ/0104.001 PZ/0104.001/ACDRY750/2/80 4 80 63 7.2 15 10 104 PZ/0105.001 PZ/0105.001/ACDRY1000/2/80 5 80 65 10 20 10 110 PZ/0106.001 PZ/0106.001/ACDRY1000/2/100 8 100 80 10 20 10 115 PZ/0107.001 PZ/0107.001/ACDRY1500/2/80 6 80 60 15 28 10 130 PZ/0108.001 PZ/0108.001/ACDRY1500/2/100 9 100 80 15 28 10 144 PZ/DRY1500/100 PZ/DRY1500/100AC
213 4 5
6
7
8 9
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
High Head Drainage
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com5
Drainage
AP Free-standing(discharge bend not shown)
l/sec0 2 4 6 8 10 12 14 16
60 m
55
50
45
40
35
30
25
20
15
10
5
0
A series of submersible pumps withhigh-head open multi-channel impellersfor clean water, rainwater and seepagewater and for sandy/muddy watercontaining small particles in suspension.APS and APE are for light duty and arefitted with single mechanical seal.APN with two mechanical seals, and APPwith three seals, are designed forheavy-duty professional use.The APF and APN-EX models have anEExd explosion-proof motor for potentiallyexplosive atmospheres.Free-standing and Auto-coupling versions.Applications:• Final effluent discharge• Industrial processes• Irrigation
Impeller
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. PASSAGE mm 230V 400V length m kgs STANDING COUPLING
1Ph 3Ph
Cast Iron230V 1PhAPS100/2/G40H 1 11/2” 10x20 0.9 6.6 10 20 PZ/0305.003 PZ/0305.003/ACAPE200/2/G50H 2 2” 10x20 1.7 11 10 26 PZ/0307.003 PZ/0307.003/ACAPN250/2/G50H 3 2” 10x20 1.8 13 10 56 PZ/0310.002 PZ/0310.002/AC400V 3PhAPS100/2/G40H 1 11/2” 10x20 0.9 2.1 10 20 PZ/0306.004 PZ/0306.004/ACAPE200/2/G50H 2 2” 10x20 1.7 3.8 10 26 PZ/0308.006 PZ/0308.006/ACAPN250/2/G50H 3 2” 10x20 1.8 3.9 10 56 PZ/0311.002 PZ/0311.002/ACAPN300/2/G50H 4 2” 10x20 2.2 5.1 10 57 PZ/0301.002 PZ/0301.002/ACAPN400/2/G50H 5 2” 10x20 3 6.7 10 80 PZ/0315.002 PZ/0315.002/ACAPN550/2/G50H 6 2” 10x20 4.1 8.7 10 84 PZ/0317.002 PZ/0317.002/ACAPP750/2/G50H 7 2” 10x20 7.2 15 10 90 PZ/0323.002 PZ/0323.002/ACAPP1000/2/G50H 8 2” 10x20 10 20 10 96 PZ/0324.002 PZ/0324.002/AC
AP Explosion-Proof400V 3PhAPF200/2/G50H-EX 2 2” 10x20 1.5 3.8 10 32 PZ/APF200/2/3 PZ/APF200/2/3 ACAPN250/2/G50H-EX 3 2” 10x20 1.8 3.9 10 56 PZ/0312.001 PZ/0312.001/ACAPN300/2/G50H-EX 4 2” 10x20 2.2 5.1 10 57 PZ/0314.001 PZ/0314.001/ACAPN400/2/G50H-EX 5 2” 10x20 3 6.7 10 80 PZ/0316.001 PZ/0316.001/ACAPN550/2/G50H-EX 6 2” 10x20 4.1 8.7 10 84 PZ/0318.001 PZ/0318.001/AC
EExd
High Head Contractors Pumps are detailed in our brochure:-‘Pumps for Contractors / Construction / Professional Hire’Please ask our sales staff for assistance.
21 3 4 5
6
78
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Economy Sewage Pumps
DGE
l/sec0 2 4 6 8 10 12
16 m
14
12
10
8
6
4
2
0
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com6
Automatic with built-in adjustable float switch.A vortex-type impeller allows excellent solidsthrough-passage of 35mm or 38mm and permitsfibrous materials to be pumped.Sturdy construction with major components incast-iron ensure long life and the pumps arefully repairable. Mechanical Seal fitted.Applications: • Domestic effluent removal• Small commercial installation*We recommend that electrical overloadprotection is incorporated into the power supply.Free-standing; selected models with auto-coupling.
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-
Sewerage
HOSE & COUPLINGS ARE AVAILABLE TO SUIT YOUR
INSTALLATION. PLEASE ASK OUR SALES STAFF.
No. PASSAGE mm 230V 400V length m kgs STANDING COUPLING1Ph 3Ph
Cast Iron230V 1Ph Float includedDGE50/2/G50 1 2” 35 0.4 2.9 10 12 PZ/DGE50/2/1 -DGE75/2/G50 2 2” 35 0.6 3.9 10 14 PZ/DGE75/2/1 -DGE100/2/G50 3 2” 38 0.9 6.5 10 19 PZ/DGE100/2/1 PZ/DGE100/2/1ACDGE150/2/G50 4 2” 38 1.1 8.2 10 20 PZ/DGE150/2/1 PZ/DGE150/2/1ACDGE200/2/G50 5 2” 38 1.5 9.3 10 21 PZ/DGE200/2/1 PZ/DGE200/2/1AC400V 3Ph Float includedDGE50/2/G50 1 2” 35 0.4 0.9 10 12 PZ/DGE50/2/3 -DGE75/2/G50 2 2” 35 0.6 1.4 10 14 PZ/DGE75/2/3 -DGE100/2/G50 3 2” 38 0.9 2 10 19 PZ/DGE100/2/3 PZ/DGE100/2/3ACDGE150/2/G50 4 2” 38 1.1 2.5 10 20 PZ/DGE150/2/3 PZ/DGE150/2/3ACDGE200/2/G50 5 2” 38 1.5 3.6 10 21 PZ/DGE200/2/3 PZ/DGE200/2/3AC
1 2 35
4
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Small Sewage Pumps
Heavy-duty cast-iron submersibles,fitted with vortex impeller to allow freepassage and suitable for heavily pollutedliquids, sewage and liquids containingfibrous material.Two mechanical shaft seals installed.DGF models use explosion-proof motor,enabling installation in potentially explosiveatmospheres. Solids passage ranges from20mm to 60mm depending on model.Applications: • Sewage works• Effluent disposal
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com7
Sewerage
DGO 150 Free-standing
DGO 50
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. mm PASSAGE mm 230V 400V length m kgs STANDING COUPLING
1Ph 3Ph
Cast Iron with Starter & Float230V 1PhDGO50/2/G50 1 2” 38 0.4 2.9 5 16.5 PZ/DGO50/2/1 -DGO75/2/G50 2 2” 38 0.6 3.9 5 16.5 PZ/DGO75/2/1 -DGO100/2/G50 3 2” 38 0.9 6.5 5 19.5 PZ/DGO100/2/1 -DGO150/2/G50 4 2” 38 1.1 8.2 5 20.5 PZ/DGO150/2/1 -DGO200/2/G50 5 2” 38 1.5 9.3 5 21.5 PZ/DGO200/2/1 -DGO100/4/G50 6 2” 20 0.6 4.5 5 19 PZ/DGO100/4/1 -DGO150/4/80 7 80 60 0.9 6.3 5 27 PZ/DGO150/4/1 PZ/DGO150/4/1ACDGO200/2/80 9 80 60 1.5 9.3 5 28 PZ/DGO200/80/1 PZ/DGO200/80/1AC400V 3PhDGO50/2/G50 1 2” 38 0.4 0.9 5 16.5 PZ/DGO50/2/3 -DGO75/2/G50 2 2” 38 0.6 1.4 5 16.5 PZ/DGO75/2/3 -DGO100/2/G50 3 2” 38 0.9 2 5 19.5 PZ/DGO100/2/3 -DGO150/2/G50 4 2” 38 1.1 2.5 5 20.5 PZ/DGO150/2/3 -DGO200/2/G50 5 2” 38 1.5 3.6 5 21.5 PZ/DGO200/2/3 -DGO100/4/G50 6 2” 20 0.6 1.9 5 19 PZ/DGO100/4/3 -DGO150/4/80 7 80 60 0.9 2.2 5 27 PZ/DGO150/4/3 PZ/DGO150/4/3ACDGO200/2/80 9 80 60 1.5 3.6 5 28 PZ/DGO200/80/3 PZ/DGO200/80/3AC
Explosion-Proof230V 1PhDGF150/2/G50-EX 4 2" 38 1.1 7.2 10 29 PZ/DGF150/2/1 PZ/DGF150/2/1/AC400V 3PhDGF100/2/G50-EX 3 2" 38 0.7 1.9 10 28 PZ/DGF100/2/3 PZ/DGF100/2/3/ACDGF200/2/G50-EX 5 2" 38 1.5 3.8 10 29 PZ/DGF200/2/3 PZ/DGF200/2/3/ACDGF100/4/80-EX 8 80 56 0.7 2.3 10 38.5 PZ/DGF100/4/3 PZ/DGF100/4/3/ACDGF200/2/80-EX 9 80 60 1.5 3.8 10 37.5 PZ/DGF200/4/3 PZ/DGF200/4/3/AC
FLOAT SWITCHES. FOR YOUR LEVEL CONTROL NEEDS
ASK OUR SALES DEPARTMENT FOR DETAILS OF OUR
FLO RANGE OF FLOAT SWITCHES.
EExd
l/sec0 2 4 6 8 10 12 14 16
16 m
14
12
10
8
6
4
2
0 12 3
5
46 8
97
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
CE Free-standing
Sewage Cutter Pumps
TT505 impeller& suction cover
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com8
Tough construction combined with highperformance make this range the choice forsewage and industrial pumping applicationswhere solids need to be reduced.T-T305 and T-T505 models employ hardenedimpellers acting on grooved suction covers tocreate a shredding effect.CE models have impellers with hardenedcutting tips rotating against serrated suctioncovers to cut solids before pumping.All models are fitted with mechanical shaftseal (CE: Silicon Carbide; T-T: TungstenCarbide) and have cast-iron construction formajor parts.
TT505
Sewerage
FOR COMPLETE SEWAGE PUMPING SYSTEMS SEE OUR
PLANET® RANGE PACKAGE PUMPING STATIONS ON
PAGES 18-19.
18 m
16
14
12
10
8
6
4
2
0l/sec
0 2 4 6 8 10 12 14 16
1 2 3
l/sec0 5 10 15 20 25 30 35 40 45
28 m
26
24
22
20
18
16
14
12
10
8
6
4
2
0
4 5 6 7 8 9
10
11
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. mm PASSAGE mm 230V 400V length m kgs STANDING COUPLING
1Ph 3Ph
Cast Iron230V 1Ph Float includedT-T305 with Control S1.5M 1 80 15 0.9 9 10 55 PE/TT305/1/FS PE/TT305/1/ACT-T505 with Control S1.5M 2 80 15 1.3 9.6 10 55 PE/TT505/1/FS PE/TT505/1/AC400V 3Ph8 CE2 4 50 21 0.8 2.1 10 24 PT/8CE2/3 PT/8CE2/3/AC15CE2 5 80 37 1.5 3.9 10 38 PT/15CE2/3 PT/15CE2/3/ACT-T505 2 80 15 1.3 2.6 10 55 PE/TT505/3/FS PE/TT505/3/ACT-T510 3 80 15 1.8 3.5 10 55 PE/TT510/3/FS PE/TT510/3/AC22CE4 6 80/100 44 2.2 5 10 68 PT/22CE4/3 PT/22CE4/3/AC37CE4 7 80/100 60 3.7 7.9 10 84 PT/37CE4/3 PT/37CE4/3/AC55CE4 8 80/100 40 5.5 12.0 10 128 PT/55CE4/3 PT/55CE4/3/AC75CE4 9 80/100 40 7.5 17.0 10 145 PT/75CE4/3 PT/75CE4/3/AC100C411 10 80/100 50 11.0 26.4 10 178 PT/100C411/3 PT/100C411/3/AC100C415 11 100 45x40 15 30.0 10 320 PT/100C415/3 PT/100C415/3/AC
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
BE with Auto-coupling
Medium Single-ChannelImpeller Sewage Pumps
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com9
20 m
18
16
14
12
10
8
6
4
2
0l/sec
0 5 10 15 20 25 30 35
20 m
15
10
5
0l/sec
0 10 20 30 40 50
High efficiency and excellent pumping performanceare features of this range. Cast-iron construction andmechanical seals on all models offer durability.Larger models have particularly good solid passage.
Applications: • Sewage Pumping Stations• Treatment Works• Industrial processes• Agriculture
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. mm PASSAGE mm 400V length m kgs STANDING COUPLING
3Ph
Cast Iron400V 3Ph4BE2 3 50 19 0.4 1.1 10 25 PT/4BE2/3 PT/4BE2/3/AC8BE2 4 50 20 0.8 2.1 10 25 PT/8BE2/3 PT/8BE2/3/AC15BE2 5 80 40 1.5 3.9 10 38 PT/15BE2/3 PT/15BE2/3/AC22BE4 6 80/100 45 2.2 5 10 68 PT/22BE4/3 PT/22BE4/3/AC37BE4 7 80/100 53 3.7 7.9 10 84 PT/37BE4/3 PT/37BE4/3/AC37BEH4 8 80/100 35 3.7 7.9 10 81 PT/37BEH4/3 PT/37BEH4/3/AC
T-T1008 1 100 100 4 8.2 8 140 PE/TT1008/3 PE/TT1008/3/ACT-T1409 2 100 100 5.5 11 8 140 PE/TT1409/3 PE/TT1409/3/AC
Sewerage
We have an extensive range of pump control panels designed and manufactured in-house, by our controlsdivision T-T Controls. Many standard control panels are available off-the-shelf for ex-stock delivery forsingle and dual operation.Control Panels can be designed and manufactured to meet clients’ specifications.Please ask our Sales Department for advice.
Control Panels
1 2
3 4 5 6
8
7
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Grinder Pumps
GRN 550 Free-standing
All models feature multi-channel open impellers and separaterotating cutter blades operating at the pump intake. Well-suitedfor use with liquids containing long fibres or solids which requireto be cut prior to being pumped, minimising the risk of blockingand providing efficiency and economy.GRS models are for lighter duty, in smaller or domesticinstallations; single mechanical seal fitted.The GRN with twin mechanical seals and the GRP, fitted withtriple mechanical seals and oil-filled motor, are for moredemanding applications.GRT, supplied with 4-pole motor, is intended for especiallyrigorous duties. Available in standard or Ex-motor specifications,GRT uses twin mechanical seals and offers discharge sizes of80mm or 100mm.GRF explosion-proof completes the Grinder series.All units are constructed in cast-iron for strength and durability,with special hardened steel cutters. Free-standing with selectedmodels in auto-coupling.Applications:• Sewage Pumping Stations• Sewage Works• Industrial• Agricultural• Ex-for potentially explosive atmospheres
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com10
55 m
50
45
40
35
30
25
20
15
10
5
0l/sec
0 2 4 6 8 10
9 m
8
7
6
5
4
3
2
1
0l/sec
0 5 10 15 20 25 30
Sewerage
EExd
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. mm PASSAGE mm 230V 400V length m kgs STANDING COUPLING
1Ph 3Ph
Cast Iron230V 1Ph Float includedGRS100/2/G40HControl S1.5M 1 11/2" 7 0.9 6.6 10 21 PZ/GRS100M/IP PZ/GRS100M/1ACGRI200/2/G50HControl S3.0M 2 2" 7 1.7 11 10 32 PZ/GRI200M/IP PZ/GRI200M/1ACGRN250/2/G50HControl S3.0M 3 2" 7 1.8 13 10 56 PZ/GRN250M/IP PZ/GRN250M/1AC
400V 3PhGRS100/2/G40H 1 11/2" 7 0.9 2.1 10 21 PZ/GRS100T/3 PZ/GRS100T/3ACGRI200/2/G50H 2 2" 7 1.7 3.8 10 32 PZ/GRI200T/3 PZ/GRI200T/3ACGRN250/2/G50H 3 2" 7 1.8 3.9 10 56 PZ/GRN250T/3 PZ/GRN250T/3ACGRN300/2/G50H 4 2" 7 2.2 5.1 10 57 PZ/GRN300T/3 PZ/GRN300T/3ACGRN400/2/G50H 5 2" 8 3 6.7 10 80 PZ/GRN400T/3 PZ/GRN400T/3ACGRN550/2/G50H 6 2" 8 4.1 8.7 10 84 PZ/GRN550T/3 PZ/GRN550T/3ACGRP750/2/G50H 7 2" 10 7.2 15 10 91 PZ/GRP750T/3 PZ/GRP750T/3AC
Explosion-Proof400V 3PhGRF200/2/G50H-EX 2 2" 7 1.5 3.8 10 32 PZ/GRF200T/2/3 PZ/GRF200T/2/3AC
4-pole motor400V 3PhGRT 400/4/80 8 80 30 3 7.3 10 97 PZ/0287.001 PZ/0287.001/ACGRT 400/4/100 9 100 30 3 7.3 10 106 PZ/0298.001 PZ/0298.001/AC
Explosion-Proof400V 3PhGRT 400/4/80-EX 8 80 30 3 7.3 10 97 PZ/0288.001 PZ/0288.001/ACGRT 400/4/100-EX 9 100 30 3 7.3 10 106 PZ/0290.001 PZ/0290.001/AC
Grinder 4-polecutter blade,
impeller &suction cover
Grinder 2-polecutter blade
& plate
1 2 3 4
5
6
7
8 9
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
MAT Free-standing
Solids-Handling, Anti Clog
MA impeller
MA suction cover/base
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. mm PASSAGE mm 230V 400V length m kgs STANDING COUPLING
1Ph 3Ph
Cast Iron230V 1PhMAI100/4/80 1 80 58x70 0.7 5.5 10 42 PZ/0325.006 PZ/0325.006/AC(With Control & Float Switch)
400V 3PhMAI100/4/80 1 80 58x70 0.7 2.3 10 42 PZ/0326.005 PZ/0326.005/AC
Explosion-Proof400V 3Ph4-poleMAF100/4/80-EX 1 80 58x70 0.7 2.3 10 40.5 PZ/MAF100/4/3 PZ/MAF100/4/3/AC
2-poleMAT300/2/80-EX 8 80 45x60 2.2 5.1 10 55.5 PZ/MAT300/2/3 PZ/MAT300/2/3ACMAT400/2/80-EX 9 80 48x60 3 6.7 10 79 PZ/MAT400/80/3 PZ/MAT400/80/3ACMAT400/2/100-EX 10 100 53x70 3 6.7 10 88 PZ/MAT400/100/3 PZ/MAT400100/3ACMAT550/2/80-EX 11 80 53x70 4.1 8.7 10 83 PZ/MAT550/80/3 PZ/MAT550/80/3ACMAT550/2/100-EX 12 100 53x70 4.1 8.7 10 93 PZ/MAT550/100/3 PZ/MAT550100/3AC
4-poleMAT200/4/80-EX 2 80 80 1.5 4.1 10 72 PZ/MAT200/80/3 PZ/MAT200/80/3ACMAT200/4/100-EX 3 100 80x100 1.5 4.1 10 72 PZ/MAT200/100/3 PZ/MAT200/100/3ACMAT300/4/80-EX 4 80 80 2.2 5.8 10 85 PZ/MAT300/80/3 PZ/MAT300/80/3ACMAT300/4/100-EX 5 100 80x100 2.2 5.8 10 96 PZ/MAT300/100/3 PZ/MAT300/100/3ACMAT400/4/80-EX 6 80 80 3 7.3 10 93 PZ/MAT400/80/4/3 PZ/MAT400804/3ACMAT400/4/100-EX 7 100 80x100 3 7.3 10 98 PZ/MAT400100/4/3 PZ/MAT4001004/AC
The selection for applications requiring maximumability to cope with solids in liquids, combined withbest possible efficiency in pumping performance.This series uses a specially shaped opensingle-channel impeller rotating within a taperedsuction cover, a combination providing superioranti-clog characteristics for trouble free operation.MAT model has sturdy cast-iron construction withtwin-seals, while providing a compact portable pump.MAF and MAT-EX types are supplied with EExdmotors, permitting installation in potentiallyhazardous explosive atmospheres.Solids passage up to 80mm x 100mm on largermodels in this series.Free-standing and auto-coupling.Applications:• Pumping Stations• Municipal• Waste Water• Effluent Processing• Industrial
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com11
l/sec0 5 10 15 20 25 30 35 40
30 m
25
20
15
10
5
0
l/sec0 5 10 15 20 25 30 35 40 45
16 m
14
12
10
8
6
4
2
0
Sewerage
2
13 5
4
6 7
98 1012
11
EExd
EExd
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
DGT
Vortex Pumps
DG Cut-away
DGP Auto-coupling
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-
No. mm PASSAGE mm 400V length m kgs STANDING COUPLING
3Ph
Cast Iron
Explosion-proof
400V 3Ph
DGT300/2/80-EX 1 80 80 2.2 5.1 10 53 PZ/0218.001 PZ/0218.001/AC
DGT400/2/80-EX 2 80 80 3 6.7 10 77 PZ/0220.001 PZ/0220.001/AC
DGT550/2/80-EX 3 80 80 4.1 8.7 10 81 PZ/0222.001 PZ/0222.001/AC
DGT200/4/80-EX 4 80 80 1.5 4.1 10 69 PZ/0224.001 PZ/0224.001/AC
DGT300/4/80-EX 5 80 80 2.2 5.8 10 82 PZ/0228.001 PZ/0228.001/AC
DGT400/4/80-EX 6 80 80 3 7.3 10 90 PZ/0232.001 PZ/0232.001/AC
DGT200/4/100-EX 7 100 100 1.5 4.1 10 75 PZ/0226.001 PZ/0226.001/AC
DGT300/4/100-EX 8 100 100 2.2 5.8 10 96 PZ/0230.001 PZ/0230.001/AC
DGT400/4/100-EX 9 100 100 3 7.3 10 98 PZ/0234.001 PZ/0234.001/AC
Larger Vortex Pumps
DGP550/4/80-E 10 80 60 4.6 10 10 81 PZ/0266.003 PZ/0266.003/AC
DGP750/4/80-E 11 80 68 6.5 15 10 122 PZ/0268.002 PZ/0268.002/AC
DGP1000/4/80-E 12 80 70 8.9 20 10 130 PZ/0270.002 PZ/0270.002/AC
DGP550/4/100-E 13 100 70 4.6 10 10 84 PZ/0267.004 PZ/0267.004/AC
DGP750/4/100-E 14 100 85 6.5 15 10 115 PZ/0269.002 PZ/0269.002/AC
DGP1000/4/100-E 15 100 85 8.9 20 10 125 PZ/0271.002 PZ/0271.002/AC
DGP1500/4/100-E 16 100 80 13.6 28 10 165 PZ/0273.002 PZ/0273.002/AC
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com12
18 m
16
14
12
10
8
6
4
2
0
l/sec0 5 10 15 20 25 30 35
18 m
16
14
12
10
8
6
4
2
0
Pumps fitted with multi-vane vortex impellersfor good solids handling up to 100mm dia,and free passage of fibrous materials.These models are intended for rigorousapplications requiring heavy duty cast-ironconstruction and multiple mechanical sealmotor protection to achieve long life.DGT offers models in 2-pole and 4-poledry motor specification with twinmechanical seals.DGP has 4-pole oil-filled motors and a triplemechanical seal arrangement.Free-standing or auto-coupling.Applications:• Municipal• Housing• Sewage Treatment• Effluent Processing• Food Waste
Sewerage
EExd
l/sec0 10 20 30 40 50 60 70
21
3
5
6
7
89
4
11
10
12
14 15
16
13
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice
e-mail: [email protected] DATA 140: 10/2001
V-flow 100 impeller
Explosion Proof Sewage PumpsE-flow & V-flow Series
V-flow 100 Auto-coupling
E-flow 100 Free-standing
E-flow 100 / E-flow 150Auto-coupling
(guide rails not shown)
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com13
A comprehensive series of submersible sewage pumps featuring EExd IIB T4explosion-proof motors on all models, for use in Zone 1 hazardous gas areas.Materials and design are selected for tough construction, reliability andresistance to wear, with pump casing, motor casing and impeller in cast-iron.All models have Silicon Carbide mechanical seal and oil chamber for effectivesealing of the motor from the pumped liquid. Maintenance is straightforward,with easy replacement of wearing parts.Free-standing or auto-coupling installation mounting are available on all modelsin the series. E-series is in 100mm and 150mm discharge, with 76/105mmsolids-passing from single-channel closed impellers for high efficiency.The V-series has vortex impellers as standard, and provides 100mm dischargecombined with excellent 100mm solids-handling.Applications:• Sewage Pumping Stations• Sewage Works• Effluent Processing• Industrial
20 m
15
10
5
0l/sec
0 5 10 15 20 25 30 35
30 m
25
20
15
10
5
0l/sec
0 20 40 60 80 100 120
l/sec0 10 20 30 40 45
25 m
20
15
10
5
0
Sewerage
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE- AUTO-No. mm PASSAGE mm 400V length m kgs STANDING COUPLING
3Ph
Cast IronE-flow Range - Channel ImpellerE-flow E100-2.2-1 E1 100 76 2.2 5.3 10 112 PB/E100-2.2-1 PB/E100-2.2-1/ACE-flow E100-2.2-2 E2 100 76 2.2 5.3 10 112 PB/E100-2.2-2 PB/E100-2.2-2/ACE-flow E100-4.0-3 ASD E3 100 76 4 9 10 139 PB/E100-4.0-3 PB/E100-4.0-3/ACE-flow E100-4.0-4 ASD E4 100 76 4 9 10 139 PB/E100-4.0-4 PB/E100-4.0-4/ACE-flow E100-4.0-5 ASD E5 100 76 4 9 10 139 PB/E100-4.0-5 PB/E100-4.0-5/ACE-flow E100-5.5-5 ASD E6 100 76 5.5 12 10 141 PB/E100-5.5-5 PB/E100-5.5-5/ACE-flow E100-5.5-6 ASD E7 100 76 5.5 12 10 141 PB/E100-5.5-6 PB/E100-5.5-6/ACE-flow E150-7.5-2 ASD E8 150 105 7.5 17 10 192 PB/E150-7.5-2 PB/E150-7.5-2/ACE-flow E150-11-3 ASD E9 150 105 11 23 10 263 PB/E150-11-3 PB/E150-11-3/ACE-flow E150-15-4 ASD E10 150 105 15 31 10 307 PB/E150-15-4 PB/E150-15-4/ACE-flow E150-18-5 ASD E11 150 105 18 37 10 320 PB/E150-18-5 PB/E150-18-5/AC
V-flow Range - Vortex ImpellerV-flow V100-1.5-0 V1 100 100 1.5 4 10 113 PB/V100-1.5-0 PB/V100-1.5-0/ACV-flow V100-2.2-1 V2 100 100 2.2 5.3 10 116 PB/V100-2.2-1 PB/V100-2.2-1/ACV-flow V100-2.2-2 V3 100 100 2.2 5.3 10 116 PB/V100-2.2-2 PB/V100-2.2-2/ACV-flow V100-4.0-3 ASD V4 100 100 4 9 10 142 PB/V100-4.0-3 PB/V100-4.0-3/ACV-flow V100-4.0-4 ASD V5 100 100 4 9 10 142 PB/V100-4.0-4 PB/V100-4.0-4/ACV-flow V100-5.5-4 ASD V6 100 100 5.5 12 10 144 PB/V100-5.5-4 PB/V100-5.5-4/ACV-flow V100-5.5-5 ASD V7 100 100 5.5 12 10 144 PB/V100-5.5-5 PB/V100-5.5-5/ACV-flow V100-7.5-5 ASD V8 100 100 7.5 17 10 165 PB/V100-7.5-5 PB/V100-7.5-5/AC
EExd IIBT4
E1
E2
E3
E6
E7
E5
E-flow 100
E4
E8 E9 E10 E11
E-flow 150
V5
V1 V2
V3
V6
V7
V4
V8
V-flow 100
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Large Sewage Pumps
B-type
SMP B-type impeller M-type impeller
At the upper end of our range we can supply submersiblepumps selected and in some cases manufacturedspecially for particular schemes.Pumps in discharge sizes up to 800mm are available invarious impeller and pump designs to enable selectionfor highest efficiency, maximum flow., best solids passageor combinations of these key requirements.A feature specified for many applications is the fitting ofan explosion proof motor to enable installation onpotentially explosive atmospheres; most of the pumpsin our larger range, as for those in smaller sizes, haveoptions including Ex-rated motors.
Construction is typically cast-iron, with special materialsfor particular specifications and with wear-resistantmechanical seals in most cases. Most models in therange have installation mounting options ranging fromwet-well auto-coupling, wet-well free-standing, anddepending on motor specification, dry-wellpedestal-mounting.
Duties range up to 100 metres discharge head and up to1000 litres per second and beyond, enabling pumps tobe selected for the largest sewage, drainage andindustrial pumping schemes.
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com14
Sewerage
l/sec0 10 100 200 300 400 1000
100 m
50
40
30
20
10
2
0
PLEASE NOTE:
OUR SALES DEPARTMENT WILL BE PLEASED TO ADVISE ON THE
MOST APPROPRIATE PUMP AND EQUIPMENT FOR YOUR APPLICATION.
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Ejectors
Ejector
TRN2
Aerators
Oxygen submersible ejectors.The Oxygen Series of ejectors is the new advancedrange of ejectors which give excellent oxygen transferand which can accommodate many applications.A choice of mounting options of free-standing orauto-coupling is available as standard.Options for multi-ejectors and larger pumps giveunlimited capability.These are sample performance curves; to obtainthe optimum ejector selection, our Technical SalesStaff will be pleased to advise on the choice of themost efficient and economical equipment.Applications:• Effluent Treatment Plant• Fisheries• Emergency treatment of rivers and lakes.
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com15
High efficiency oxygen saturation is achieved as a result of fine air-molecules produced, giving an excellent oxygen transfer.The submersible aerators are ideal for improving the oxygen supply in liquids, and treatment processes where the biologicaland chemical oxygen demand is high. The aerators are supplied complete with a silencer and valve set, although the air-feedpipe is not included, but can be supplied as an extra to suit your application. The arrangement of discharge outlets providesa regular pattern of oxygen transfer around the aerator.Aerators can be used singly or in a combination of multiple units to cover a variety of tank formats and sizes.For selection please contact our Sales Department who will be happy to advise on the appropriate equipment for your application.Application:• Effluent Treatment• Maintaining Liquid Oxygen level• Reducing Odours• Revitalising Lakes and still waterGreater capacities can be achieved with a combination of blowers to improve oxygenation at greater depth.Please consult with our sales staff.
kg/hr 02
0 20 40 60 80 100 120 140
0 m
1
2
3
4
5
6
7
Depth
Treatment
Ejector (pump not shown)*
PRODUCT CURVE OUTLET kW Rated Current Amps Cable Weight FREE- AUTO-No. mm 400V length m kgs STANDING COUPLING
3Ph
400V 3PhOxygen 50 1 50 1.1 2.5 10 33 PB/OXYGEN50 PB/OXYGEN50ACOxygen 80/55 2 80 8.9 20.0 10 160 PB/OXYGEN80/55 PB/OXYGEN80/55ACOxygen 150/80 3 150 8.9 20.0 10 195 PB/OXYGEN150/80 PB/OXYGEN15080ACOxygen 150/95 4 150 16.4 36.0 10 277 PB/OXYGEN150/95 PB/OXYGEN15095AC
PRODUCT CURVE kW Rated Current Amps Cable Weight FREE-No. 400V length m kgs STANDING
3Ph
Cast Iron8 TRN2 1 0.8 1.8 10 60 PT/8-TRN2/315 TRN2 2 1.5 0.4 10 70 PT/15-TRN2/322 TRN2 3 2.2 5 10 170 PT/22-TRN2/337 TRN2 4 3.7 8.6 10 180 PT/37-TRN2/355 TRN2 5 5.5 13 10 220 PT/55-TRN2/355 TRN2 ASD 5 5.5 13 10 220 PT/55-TRN2/3ASD75 TRN2 6 7.5 17 10 240 PT/75-TRN2/375 TRN2 ASD 6 7.5 17 10 240 PT/75-TRN2/3ASD110 TR2 7 11 24 10 280 PT/110-TR2150 TR2 8 15 30 10 290 PT/150-TR2190 TR 9 19 39 8 520 PT/190-TR2220 TR 10 22 46 8 530 PT/220-TR2
Depth
1 2 3 4
kg/hr 02
0 0.5 1 5 10 50
1.5 m
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
1
3
2
4 5
6
7
8, 9, 10
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Mixer
Mixers
Scum skimmer
Scum Skimmer
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com16
T-T offer a vast range of Submersible Mixers, for many applications in homogenizing,suspensions, aeration and flow generation.
With high efficiency motors ranging from fractional kilowatts up to 16 kW combinedwith a wide range of propeller arrangements which are driven through planetary gears,resulting in optimum slow speeds for precise mixing; allows T-T to select the best Mixerfor the applications.
Our range of Mixers are designed for low maintenance and long-life, having a superiorsealing arrangement, giving long-term savings on running costs. This combined with theaccessories which are available for installing and maintaining mixers, ensures that weselect the most appropriate equipment for your application.
Our Sales staff will be pleased to assist in the best selection of equipment for your application.
Ideal for ejecting and decanting floating matter at treatment works and industrial processes.The Scum Skimmer is supplied complete with adjustable buoyancy floats and 6 m of mooringrope. Available in 230 volt or 400 volt.
Applications:
• Effluent Treatment
• Industrial Processes
• Marinas and Water Systems
Treatment
PRODUCT kW Rated Current Amps Cable Weight230V 400V length m kgs1Ph 3Ph
230V 1PhSkimmer 50 1.25 9.6 10 - A1/10715400V 3PhSkimmer 50 1.25 2.6 10 - A1/10719
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Polyurethane-lined Pumps
VLP
VLP impeller Section through VLP casingshowing lining
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com17
Submersible VULCO Pumps have a partlyrecessed impeller. The impeller and internalpump casing are coated in a thick layer ofabrasion-resistant polyurethane.VULCO is ideal for transfer of ceramic glaze, slipand enamel and other dense, abrasive liquids.3 mechanical seals fitted.Applications:• Ceramics• Grit transfer• Abrasives manufacture
35 m
30
25
20
15
10
5
0l/sec
0 10 20 30 40 50
SpecialisedProducts
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable Weight FREE-No. mm PASSAGE mm 400V length m kgs STANDING
3Ph
Polyurethane-lined Cast Ironpumps for abrasive liquidsVulco, submersible400V 3PhVLP200/4/50 1 50 28 1.5 4.1 10 26 PZ/VLP200/3VLP400/2/50 2 50 25 3.6 8.0 10 48 PZ/VLP400/3VLP550/2/50 3 50 21 4.9 10.1 10 67 PZ/VLP550/3VLP750/4/80 ASD 4 80 45 6.5 14.9 10 80 PZ/VLP750/3ASDVLP1000/4/80 ASD 5 80 45 8.9 20.0 10 81 PZ/VLP1000/3ASDVLP1500/4/80 ASD 6 80 54 14 28.2 10 152 PZ/VLP1500/3ASDVLP2000/4/80 ASD 7 80 54 16 36.0 10 190 PZ/VLP2000/3ASD
1 2
34
5 6 7
These are vertically arranged water pumps withexternal motor and submerged pump section,connected by shaft.Pump casing, impeller and motor support are incast-iron with the drive-shaft in stainless steel.Typical application in tank drainage of slightly dirtywater and non-aggressive liquids.Motor protection rating IP44.
PRODUCT CURVE OUTLET FREE kW Rated Current Amps Cable WeightNo. PASSAGE mm 230V 400V length m kgs
1Ph 3Ph
Shaft-driven Pumps230V 1PhGFM100 1 2" 25 1.1 8.2 None 37 PS/GFM100/1GFM150 1 2" 25 1.1 8.2 None 44 PS/GFM150/1NGM100 2 11/4" 15 0.55 2 None 23 PS/NGM100/1400V 3PhGF100 1 2" 25 1.1 3.5 None 37 PS/GF100/3GF150 1 2" 25 1.1 3.5 None 44 PS/GF150/3NG100 2 11/4" 15 0.55 3.9 None 23 PS/NG100/3
Shaft-driven pumps
Shaft-driven Pumps
l/sec0 1 2 3 4 5
10 m
8
6
4
2
0
1
2
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Planet® Range
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com18
Package PumpingStations
Typical Dual-Pump Package Pumping StationGalvanised access cover
2-cable duct inlets
High-level alarm float-switch
Optional externalinlet pipeworkaccepts 160mm O/DPipe (or 110mm O/Dwith adaptor)
Level control float-switches
3-standard inlet socketsaccept 160mm O/D Pipe(or 110mm O/D with adaptor)
Cover slab by client
Isolating gate valve
Outlet for connection torising main
2 Non-return valves
Pipework50mm
80mm100mm150mm
Concrete surround by client
2-submersible pumpson auto couplings
T-T Pumps Planet® Range of Package Pumping Stations provide an efficient and economical way ofinstalling a sewage/drainage pumping station and are available on short lead-times to fit in with tightconstruction schedules.
Pump chambers are well engineered and manufactured in strong impact resistant polyethylene, andstandard units can be adapted to suit individual requirements at manufacturing stage. The smoothinternal walls aid the hygienic disposal of effluents, for the avoidance of smells and septicity.
Your package will come complete with pipework pre-assembled in the polyethylene chamber, ready forinstallation into the ground, after which the pumps and control equipment are added. All PackagePumping Stations are supplied with controls for fully automatic operation, and with high-level alarmindication. A comprehensive instruction manual helps you to get the package working in the shortestpossible time. You are responsible for all installation and commissioning, unless arranged otherwise.
A wide range of submersible pumps can be used for the Package Stations, including the Grinder seriesof high-head macerator pumps for difficult applications.We are able to select from T-T Pumps complete range, in order to match your requirements.
To ensure continued maintenance of
your pumping system, we strongly
recommend that you enter into a
Service Contract, which will provide
periodic service visits, and repairs
if necessary.
Full service and repair facilities,
on-site and works-based are available,
with spares stock-holding.
Both electrical and mechanical work
is undertaken.
All Package Pumping Stations include high-level alarm indicator via float switch in pump chamber. Automatic level control operation is provided,with float-switches separately suspended. Alternative level systems, such as non-contact ultrasonic sensors, are provided to special order.
Depending on the exact requirements for each site, our controls division can design and manufacture control panels to your specification together withisolators, switch-fuses and electrical equipment as necessary. Kiosk housings, for control panels and electricity meter installation, are available for siteswhere no suitable building exists.
Control panels/starters
Service
Package Pumping Stations
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
A Depth from ground level to inlet invert mm
B Difference in level between inlet level and discharge metresinto outfall chamber(if any point of rising main is higher than the dischargeinto the outfall chamber, please state difference in levels)
C Total distance from pump chamber to outfall chamber metres
D Rising main internal diameter mm
E Rising main material
F Fluid to be pumped:
Sewage Drainage Other (please specify)
G Pumping capacity required(or number/type of property/max. number of occupants)
H Electrical power supply available: 230V 1Ph or 400V 3Ph
J Will the pumping station be adopted? Yes No
K If 'Yes', who is the adopting authority?
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com19
Package Pumping Stations
Mercury® - Single Pump Venus® - Single Pump
Saturn® - Dual Pump Jupiter® - Dual Pump
The Venus® chamber, for a single pump, is the most popularsize for use in a single dwelling, toilet block, or small officeserving up to 10 people.
Compatible pumps are:
Cutter - 80mm
Grinder - 50mm
Vortex - 50mm
This chamber, for a single pump is ideal for small flows from a singledwelling and where excavation depth is limited.
Compatible pumps are:
Cutter - 80mm
Grinder - 50mm
Vortex - 50mm
The Saturn® chamber for two pumps, is suitable for small housingand industrial/commercial developments, restaurants, smallhotels/nursing homes, caravan sites.Larger capacities are available to special order.
Compatible pumps are:
Cutter - 80mm/100mm
Grinder - 50mm/80mm/100mm
Vortex - 50mm/80mm/100mm
Channel - 50mm/80mm/100mm
The 2-pump Jupiter® pump station is the selection for larger developments, hotels,hospitals, sewage works.The basic unit is capable of special build modification to provide capacities up to15,000 litre, and can be incorporated into schemes where, for example Sewers forAdoption specification is required.
Compatible pumps are:
Cutter - 80mm/100mm
Grinder - 50mm/80mm/100mm
Vortex - 50mm/80mm/100mm
Channel - 50mm/80mm/100mm
Pump Chamber Ground Level
OutfallChamber
Rising Main
C
B
Questionnaire
Dimensions
A
B
To enable us to select the correct equipment for your scheme, please completethis short questionnaire, and send to us. We will send our quotation by return.
Site/Scheme Name
Your Site Data
Company
Name Job Title
Address
Postcode E-mail
Tel Fax
Your Contact Details
A
A B
Mercury® 1016mm 1224mmVenus® 1112mm 2310mmSaturn® 1624mm 2015mmJupiter® 2246mm 2520mm
External dimensions for standard-size pump chambers.Refer to us for dimension check.
Package PumpingStations
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Cast Iron Valves
Gate Valves - Cast Iron
Gate Valves - Cast Iron Resilient Seat
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com20
Cast-iron metal-seat gate valves for water, sewage. effluent and process applications.
Cast-iron resilient seat gate valves for water, sewage, effluent and process applications.
Gate Valves Cast Iron Resilient Seat BS5163:1986
TYPE A B C D E F G H I kgNo.-Dia.
80 203 200 160 132 8-19 22 3 382 200 20 VB/CG80MFNP16/B100 229 220 180 156 8-19 24 3 425 250 29 VB/CG100MFNP16/B150 267 285 240 211 8-23 26 3 470 250 51.5 VB/CG150MFNP16/B200 292 340 295 266 12-23 30 3 580 300 89 VB/CG200MFNP16/B250 330 405 355 319 12-28 32 3 670 360 114 VB/CG250MFNP16/B300 356 460 410 370 12-28 32 4 758 450 195 VB/CG300MFNP16/B
Dimensions in mm. Flange pattern and drilling to BS EN 1092-2.Hand Wheel Height (H*) is H less 50mm. Fusion-bonded epoxy coated. PN16.
Gate Valves Cast Iron BS5163:1986
TYPE A B C D E F G H* H I kgNo.-Dia.
50 178 165 125 99 4-19 20 3 306 376 180 15 VB/CG50-MFNP1680 203 200 160 132 8-19 22 3 390 460 204 27 VB/CG80-MFNP16100 229 220 180 156 8-19 24 3 420 490 204 35 VB/CG100-MFNP16150 267 285 240 211 8-23 26 3 528 598 280 65 VB/CG150-MFNP16200 292 340 295 266 12-23 30 3 670 740 320 104 VB/CG200-MFNP16250 330 405 355 319 12-28 32 3 738 808 360 129 VB/CG250-MFNP16300 356 460 410 370 12-28 32 4 870 940 450 214 VB/CG300-MFNP16350 381 520 470 429 16-28 36 4 950 1040 500 404 VB/CG350-MFNP16400 406 580 525 480 16-31 38 4 1040 1130 560 537 VB/CG400-MFNP16
Dimensions in mm. Flange pattern and drilling to BS EN 1092-2. Epoxy coated. PN16.
Valves
A
H
D
FG
E
C B
H*
I
A
H
D
FGE
C B
With square capfor tee-key operation
H*
I
With handwheel
TEE-KEYS AND EXTENSION SPINDLES AVAILABLE.
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
Cast Iron Valves
Ball Type Non-Return Valves
Flap Valves - Ductile Iron
PRODUCT A B C kgNo.-Dia. P.C.D.
Flap Valves80mm 200 225 125 4-19 160 5 VB/CF80-MFNP16100mm 220 245 135 4-19 180 7 VB/CF100-MFNP16150mm 285 315 172 4-22 240 11 VB/CF150-MFNP16200mm 340 370 204 4-22 295 17 VB/CF200-MFNP16250mm 400 443 243 4-26 355 25 VB/CF250-MFNP16300mm 460 510 280 4-26 410 34 VB/CF300-MFNP16
Dimensions in mm. Epoxy coated.
Swing Check Valves - Cast Iron / With Lever & Weight
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com21
Cast-iron swing check valves for water, sewage, effluent and process applications. Suitablefor horizontal or vertical installation and available with or without external lever and weight.
Ball Type Non-Return Valves
TYPE A B C D E F G L kg
2” 152 50 172 - 114 - - - 5 PZS/50NRV80 272 80 246 160 200 45˚ 18 187 20 PZS/80NRV100 340 100 300 180 220 45˚ 18 200 29 PZS/100NRV150 398 150 402,5 240 285 45˚ 22 291 59 PZS/150NRV200 508 200 515 295 340 45˚ 22 342 109 PZS/200NRV250 600 250 600 350 400 30˚ 22 - 135 PZS/250NRV300 700 300 680 400 550 30˚ 22 - 200 PZS/300NRV
Dimensions in mm.Note: 2” valve has threaded connections. PN10.
Cast-iron Ball Non-Return Valves for water, sewage, effluent and process applications.Sinking ball.
Ductile-iron Flap Valve. Double hung flap valves for either wall or pipe mounting.
Valves
Swing Check Valves Cast Iron BS5153:1974
TYPE A B C D E F G H I J K kg kg ORDER REF ORDER REFNo.-Dia. Standard L&W (Standard) (With Lever & Weight)
80 241 200 160 132 8-19 22 3 290 241 222 275 31 33 VB/CR80-MFNP16 VB/CR80BS5153LW100 292 220 180 156 8-19 24 3 325 292 236 302 41 45 VB/CR100-BS5153 VB/CR100BS5153LW150 356 285 240 211 8-23 26 3 400 356 295 365 78 84 VB/CR150-MFNP16 VB/CR150MFNP16LW200 495 340 295 266 12-23 30 3 485 495 375 438 149 165 VB/CR200-BS5153 VB/CR200BS5153LW250 622 405 355 319 12-28 32 3 555 622 450 512 186 196 VB/CR250-BS5153 VB/CR250BS5153LW300 698 460 410 370 12-28 32 4 610 698 510 543 250 290 VB/CR300-BS5153 VB/CR300BS5153LW
Dimensions in mm. Flange pattern and drilling to BS EN 1092-2. Epoxy coated. Note: Lever and weight can be fitted to either side of valve. PN16.
C
A
B
E D
GF
L
DSTANDARD
FGE
A
C B
I
FITTED WITHLEVER &WEIGHT
H
K (L & W only)
J
80mm - 300mm valves. 2” valve.
80mm - 300mm valves.
Fixing Holes
NB
B
C
A
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com22
A selection of Brass Valves for pipe system assembly.
GATE VALVE BALL VALVE SWING CHECK SPRING CHECK SPRING CHECK(HEAVY DUTY) VALVE (METAL FACED) VALVE VALVE (WITH STRAINER)
SIZE BSP ORDER MAX ORDER MAX ORDER MAX ORDER MAX ORDER MAXREF PRESSURE REF PRESSURE REF PRESSURE REF PRESSURE REF PRESSURE
1/2” VI/157/14 16 Bar VI/90-14 50 Bar VI/130-14 12 Bar VI/103-14 12 Bar VI/108-14 10 Bar3/4” VI/157/20 16 Bar VI/90-20 40 Bar VI/130-20 12 Bar VI/103-20 12 Bar VI/108-20 10 Bar1” VI/157/25 16 Bar VI/90-25 40 Bar VI/130-25 12 Bar VI/103-25 12 Bar VI/108-25 10 Bar1 1/4” VI/157/32 16 Bar VI/90-32 30 Bar VI/130-32 10 Bar VI/103-32 10 Bar VI/108-32 8 Bar1 1/2” VI/157/40 16 Bar VI/90-40 30 Bar VI/130-40 10 Bar VI/103-40 10 Bar VI/108-40 8 Bar2” VI/157/50 16 Bar VI/90-50 25 Bar VI/130-50 10 Bar VI/103-50 10 Bar VI/108-50 8 Bar2 1/2” VI/157/65 16 Bar VI/90-65 18 Bar VI/130-65 8 Bar VI/103-65 8 Bar VI/108-65 6 Bar3” VI/157/80 16 Bar VI/90-80 16 Bar VI/130-80 8 Bar VI/103-80 8 Bar VI/108-80 6 Bar4” VI/157/100 16 Bar VI/90-100 14 Bar VI/130-100 8 Bar VI/103-100 8 Bar VI/108-100 6 Bar
Brass ValvesValves
Terms & Conditions of SaleGuaranteeAll goods are covered by our 12 month warranty period from the date of sale. Should a product fail during thisperiod the faulty product should be returned to our works for inspection and evaluation.
AvailabilityT-T Pumps hold stocks of the popular products. Sensible lead times are offered on non-stock items.
DeliveryNext working day delivery for the majority of mainland UK is offered as standard for stock products wheredelivery is included in the price. Other stock products are supplied on a 2-3 day delivery, carriage extra,although next day delivery is available at a small premium.
PricesAll prices are in Pounds Sterling and are exclusive of VAT. We reserve the right to adjust prices and specificationswithout notice. We apply a minimum net order value of £30.00, exclusive of VAT.
Conditions of SaleAll products are sold subject to our General Conditions of Sale, which are printed on all Confirmations, DeliveryNotes and Invoices. Copies are available on request. Customers are deemed to have accepted the provisionsof these Conditions prior to any purchase.
Product SelectionThe pump performance curves indicate the actual output possible from a given product. Any selection outsidethe limitations of the performance curve should not be made. Advice on selecting the correct product is freelyavailable from our Sales Department, without any obligation. All electrical products are designed for 50 Hz.Alternative frequencies may be available on request. Alternative voltages on request.
SpecificationIn keeping with our constant improvement policy, we reserve the right to change specifications without notice.Product illustrations show typical arrangements only, and must not be regarded as fully representative ofproducts to be supplied; refer to us for further information.
Health & SafetyWhen installing machinery in industrial or educational environments it is important to install in compliancewith Health & Safety at Work Act 1974. All electrical installations must comply with the 16th Edition of IEERegulations, or subsequent editions. Electrical products are intended for permanent hardwired connectionto the power supply, with safety devices, connection and switching appropriate to the particular application.You are advised to employ the services of a qualified electrical engineer for all installations.
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
tel: 01630 647200 fax: 0800 0132061 www.ttpumps.com23
Pump Selection Questionnairefor Electric Submersible Pumps
To help us select the most appropriate equipment for your application, please complete as much of thisquestionnaire as possible. If you require assistance please call our sales staff who will be pleased to advise.
Sump Depthm
Ground Level
metres
Start
Stop
Sump Base
Duty Level
All levels in metres
Dischargelevelm
m
m
m
m
m
Highest point of rising mainif above discharge level
m
RISING MAIN
Pump
Total length of rising main
Your Contact Details
Scheme
Application
Liquid to be pumped
Inflow (if known) l/sec Temperature ºC
Pump capacity l/sec Total head m
Rising main (delivery pipework), Nominal bore (if known) mm
Delivery pressure if required mm head
Power supply available 230V/1Ph/50Hz 400V/3Ph/50Hz
Company Name
Name
Job Title
Address
Postcode E-mail
Telephone Fax
Inlet Invertm
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior notice e-mail: [email protected] DATA 140: 10/2001
T-T Pumps Ltd., Onneley Works, Newcastle Road, Woore, Cheshire CW3 9RU
Tel: 01630 647200 Fax: 01630 642100FREE Fax Order Line: 0800 0132061www.ttpumps.com e-mail: [email protected]
We reserve the right to amend specifications without prior notice. © T-T Pumps Ltd. 2001 DATA 140: 10/2001
Other Products and Services• Package Pumping Stations• Pumping Contracts - Design, Install, Commission• Control Systems• Pumps for: Contractors, Construction, Professional Hire• After-Sales
© T-T Pumps Ltd. 2001We reserve the right to amend specifications without prior noticee-mail: [email protected] DATA 140: 10/2001