Drainage Materials

CITY OF BUCKEYE Development Services Department

Engineering Department

Page 1 of 16

530 East Monroe Avenue • Buckeye, Arizona 85326 Phone 623-349-6200 • Fax 623-349-6221 •

N:\Construction\Approved Materials\Interim Approved Materials List\- City of Buckeye - Master Approved Materials List - Updated 09-07-2021 (per sz, ok to hand out to contractors).doc

August 16, 2021 RE: Master Approved Materials List

Updated – 09-07-2021 The following are approved materials for construction in the City of Buckeye: PRODUCT MANUFACTURER STATUS REV. DATE

Drainage Materials: Catch Basin Frame & Cover Catch Basin Grate – 1930 Deeter Foundry Approved 1R 07-15-13 Catch Basin Frame & Cover #1722 Deeter Foundry Approved 1R 11-15-17 Catch Basin Hardware – Angle & Support Grate Solutions Approved 1R 11-15-17 Rebar - #4 Bars – Grade 60 Nina Construction Supply Approved 2R 12-12-17 Catch Basin Grate Bar T Equipment Service Not Approved 1R 05-29-18 Catch Basin Frame & Cover Bar T Equipment Service Approved 1R 05-29-18 Storm Drain Pipe: 15 inch class 5 RGRCP Rinker Approved 1R 09-07-21 18 inch class 4 RGRCP Rinker Approved 1R 09-07-21 24 inch class 3 RGRCP Rinker Approved 1R 09-07-21 24 inch class 4 RGRCP Rinker Approved 1R 09-07-21 24 inch class 5 RGRCP Rinker Approved 1R 09-07-21 30 inch class 3 RGRCP Rinker Approved 1R 09-07-21 30 inch class 4 RGRCP Rinker Approved 1R 09-07-21 30 inch class 5 RGRCP Rinker Approved 1R 09-07-21 36 inch class 3 RGRCP Rinker Approved 1R 09-07-21 36 inch class 4 RGRCP Rinker Approved 1R 09-07-21 36 inch class 5 RGRCP Rinker Approved 1R 09-07-21 42 inch class 3 RGRCP Rinker Approved 1R 09-07-21 42 inch class 4 RGRCP Rinker Approved 1R 09-07-21 42 inch class 5 RGRCP Rinker Approved 1R 09-07-21 48 inch class 3 RGRCP Rinker Approved 1R 09-07-21 48 inch class 4 RGRCP Rinker Approved 1R 09-07-21 48 inch class 5 RGRCP Rinker Approved 1R 09-07-21 15 inch class 5 RGRCP Forterra Approved 1R 07-15-13 18 inch class 5 RGRCP Forterra Approved 1R 07-15-13 24 inch class 3 RGRCP Forterra Approved 1R 07-15-13 24 inch class 4 RGRCP Forterra Approved 1R 07-15-13 24 inch class 5 RGRCP Forterra Approved 1R 07-15-13



Page 2 of 16



30 inch class 3 RGRCP Forterra Approved 1R 07-15-13 30 inch class 4 RGRCP Forterra Approved 1R 07-15-13 30 inch class 5 RGRCP Forterra Approved 1R 07-15-13 36 inch class 3 RGRCP Forterra Approved 1R 07-15-13 36 inch class 4 RGRCP Forterra Approved 1R 07-15-13 36 inch class 5 RGRCP Forterra Approved 1R 07-15-13 42 inch class 3 RGRCP Forterra Approved 1R 07-15-13 42 inch class 4 RGRCP Forterra Approved 1R 07-15-13 42 inch class 5 RGRCP Forterra Approved 1R 07-15-13 48 inch class 3 RGRCP Forterra Approved 1R 07-15-13 48 inch class 4 RGRCP Forterra Approved 1R 07-15-13 48 inch class 5 RGRCP Forterra Approved 1R 07-15-13 12-60 inch HDPE ADS Conditional 1R 07-15-13 18 inch PVC (outside of ROW) Vinyltech Conditional 1R 01-16-18 HDPE Pipe Fittings 4-60 inch HDPE pipe fittings ADS Approved 1R 07-15-13 Flexible Pipe water stop 4-12 inch Vertite W-S Waterstop Vertex Approved 1R 07-15-13 15 inch and larger Vertite W-S Waterstop Vertex Approved 1R 07-15-13 Storm Drain Gaskets Profile Gasket 12 inch thru 120 inch J-K Polysource Approved 1R 07-15-13 48” Manhole 48“Storm drain manhole Olsen Pre cast Approved 1R 07-15-13 60” Manhole 60“Storm drain manhole Olsen Pre cast Approved 1R 07-15-13 60”Storm drain manhole Jensen Pre cast Approved 1R 01-16-18 Storm Drain Manhole Frame & Cover Storm drain manhole frame & cover Deeter Foundry, Inc. Conditional 1R 01-16-18 Storm drain manhole frame & cover Neenah Foundry Approved 2R 01-23-18 Concrete Flared End Section Circular flared end section Pre Cast Concepts Not Approved 1R 07-15-13 Rip Rap Rip-Rap D50 = 6” Mtn. Vista Brown Image Trucking Not Approved 1R 11-16-17



Page 3 of 16



Grout 4 sack Rip Rap Grout - 240800 Drake Materials Approved 1R 01-23-14 Filter Fabric C-86-NW Nonwoven geotextile Contech Approved 1R 07-15-13 0801T Nonwoven geotextile ADS Geosynthetics Approved 1R 07-15-13 GeoFabric GF8NW Geo Supply Approved 1R 11-16-17 MiraDrain 2000 Composite Wall Drain Carlisle Not Approved 1R 08-18-15 Geotex 601 Propex Approved 1R 11-30-17 J-Drain 200 Series DR Enterprises Approved 1R 12-13-17 Mirafi 140N Tencate Approved 1R 12-13-17 Sealants Sikaflex -1c SL Polyurethane Sealant Sika Approved 1R 08-18-15 ConSeal – CS102 Butyl Rubber Sealant ConSeal Approved 1R 01-16-18 Hand Rail Material Hand Rail Grate Solutions Approved 1R 11-15-17 Hand Rail Specialty Companies Not Approved 1R 01-23-18 Hand Rail Wheatland Tube Approved 1R 02-06-18 Hand Rail Bar T Equipment Service Approved 1R 05-29-18 Trash Rack Material Trash Rack Grate Solutions Approved 2R 11-30-17 Trash Rack Bar T Equipment Service Approved 1R 05-29-18 Underground Retention System Underground Ret. Sys. Backfill Irrigation Delivery Structure

Paving Materials:

½” Gyratory Mix MAG ½” Gyratory – Plant 4 El Mirage Southwest Asphalt Conditional 1R 06-25-18 MAG ½” Gyratory – Plant 10 New River Southwest Asphalt Conditional 1R 06-25-18 ¾” Gyratory Mix MAG ¾” Gyratory – Plant 4 El Mirage Southwest Asphalt Conditional 1R 06-25-18 MAG ¾” Gyratory – Plant 10 New River Southwest Asphalt Conditional 1R 06-25-18 ½” Marshall Mix



Page 4 of 16



MAG ½” Marshall – Plant 4 El Mirage Southwest Asphalt Conditional 1R 06-25-18 MAG ½” Marshall – Plant 10 New River Southwest Asphalt Conditional 1R 06-25-18 ¾” Marshall Mix MAG ¾” Marshall – Plant 4 El Mirage Southwest Asphalt Not Approved 1R 06-25-18 MAG ¾” Marshall – Plant 10 New River Southwest Asphalt Not Approved 1R 06-25-18 MAG Class ‘AA’ Concrete: 4000 PSI MAG AA 14004 Arizona Materials Approved 1R 07-15-13 4000 PSI MAG AA 1” 1556313 Cemex Approved 1R 07-15-13 4000 PSI MAG AA w/Ash 240400 Drake Materials Approved 1R 01-23-14 4000 PSI MAG AA Machine 440401 Drake Materials Approved 2R 02-19-14 4000 MAG AA 25% Ash 1556313 Cemex Approved 1R 11-15-17 4000 MAG AA 25% Ash Mach. 1555658 Cemex Approved 2R 11-30-17 4000 PSI MAG AA w/Ash P4025AA1 CalPortland Approved 2R 06-25-18 4000 PSI MAG AA- No Ash P4015AA1 CalPortland Approved 1R 06-25-18 MAG Class ‘A’ Concrete: 3000 PSI MAG A W/ash P3025A01 CalPortland Approved 1R 10-15-13 3000 PSI A3040 1” Rock Solid Approved 1R 10-15-13 3000 PSI A3040 ¾” Rock Solid Not Approved 1R 07-15-13 MAG A 1” machine 23008122 - plant 40 Hanson Materials Not Approved 1R 07-15-13 MAG A 1” machine 23008122 - plant 67 Hanson Materials Not Approved 1R 07-15-13 3000 PSI MAG A 13004 Arizona Materials Approved 1R 07-15-13 3000 PSI MAG A slip form 13008 Arizona Materials Approved 1R 08-18-15 3000 PSI MAG A w/Ash 230400 Drake Materials Approved 1R 07-15-13 3000 PSI MAG A Curb Machine 430401 Drake Materials Approved 1R 01-23-14 MAG A 3000 PSI Combo Arizona Materials Approved 1R 04-05-16 3000 PSI MAG A 1” 1555049 Cemex Approved 1R 11-15-17 3000 MAG A 25% Ash Machine 1555657 Cemex Approved 2R 11-30-17 3000 PSI MAG A Flowable 13054HR Arizona Materials Not Approved 1R 12-13-17 State Class S 3000 PSI 13040 Arizona Materials Approved 1R 12-13-17 MAG Class ‘B’ Concrete MAG B 2500 PSI 12504 Arizona Materials Approved 1R 07-15-13 2500 MAG B W/Ash 225400 Drake Materials Approved 1R 07-15-13 2500 MAG B 25% Ash 1554955 Cemex Approved 1R 11-15-17 2500 MAG B 25% Ash Mach 1555656 Cemex Approved 1R 11-15-17 MAG Class ‘C’ Concrete MAG C 2000 PSI 12004 Arizona Materials Approved 1R 10-15-13



Page 5 of 16



2000 PSI MAG c W/Fly ash 220400 Drake Materials Not Approved 1R 07-15-13 2000 PSI MAG CW/Fly ash 1” 1555624 Cemex Not Approved 1R 07-15-13 MAG Class ‘AA’ Concrete w/ Fiber ADOT State ‘S’ Concrete State Class S 3000 PSI - 13030 Arizona Materials Approved 1R 08-18-15 State S 3000 #57 - 1419159 Cemex Approved 1R 08-18-15 3000 PSI Fly Ash 3/8” 1332544 Cemex Approved 1R 08-18-15 Shotcrete 3000 PSI Shotcrete – 33004 Arizona Materials Approved 1R 08-18-15 Concrete Cure: 1300-Clear Curing Compound W.R Meadows Approved 1R 08-18-15 1600-Clear Curing Compound W.R Meadows Approved 1R 08-18-15 Expansion Material: Fiber Expansion Joint W.R Meadows Approved 1R 08-18-15 MAG CLSM: ½ sack ABC Slurry – PHCLSM Arizona Materials Approved 1R 07-15-13 ½ sack ABC Slurry – 105900 Drake Materials Approved 1R 07-15-13 0.5 sack PHCLSM 1332797 Cemex Approved 1R 07-15-13 Detectable Warnings Detectable Warning Tiles – Terracotta Tek Way Approved 1R 11-16-17 ABC MAG ABC – Sun City Plant Lafarge Approved 1R 06-06-16 ADOT Class 2 AG3165-ADOT class 2 Lafarge Approved 1R 10-15-13 MAG ABC Aggregate Base Glendale Drake Approved 1R 07-15-13 MAG ABC Custom Landscape Materials Approved 1R 07-15-13 3/8” ASTM C33 Aggregate MR Tanner Glendale Pit Approved 1R 08-18-15 MAG ABC - 16272 Vulcan Sun City Quarry Not Approved 1R 11-20-17 MAG ABC - Peoria Plant South West Rock Products Not Approved 1R 11-01-16 MAG ABC – Northern Pit Southwest Rock Products Approved 1R 11-20-17 ADOT Class 2 ABC Sun City Aggregate 4118 Not Approved 2R 01-23-17 MAG ABC PO#315076 – North Pile Kilauea Crushers Not Approved 1R 11-06-17 MAG ABC PO#316834 – Buckeye Hills Kilauea Crushers Not Approved 1R 05-29-18 MAG ABC PO#316599 – Buckeye Hills Kilauea Crushers Approved 1R 05-29-18



Page 6 of 16



MAG ABC – Northern Plant Southwest Rock Products Not Approved 2R 06-25-18 MAG ABC – C.O.P. Northern Pit Southwest Rock Products Approved 1R 05-29-18 MAG ABC PO#318275 – Estrella Plant Kilauea Crushers-South Pile Approved 1R 05-06-19 MAG ABC – ADOT CM2001 Vulcan – Sun City Plant Approved 1R 08-01-19 ITS 2” Schedule 40 PVC JM Eagle Approved 1R 02-29-16 2 ½” Schedule 40 PVC JM Eagle Approved 1R 02-29-16 3” Schedule 40 PVC JM Eagle Approved 1R 02-29-16 2 ½” 90° Elbow JM Eagle Conditional 1R 02-29-16 3” 90° Elbow JM Eagle Conditional 1R 02-29-16 2” repair couplings JM Eagle Approved 1R 02-29-16 3” repair couplings JM Eagle Approved 1R 02-29-16 2” Caps JM Eagle Approved 1R 02-29-16 3” Caps JM Eagle Approved 1R 02-29-16 PVC Purple Primer – 8210 01 JM Eagle Approved 1R 02-29-16 PVC Medium Body Cement 8212 05 JM Eagle Approved 1R 02-29-16 PVC Electrical Conduit Cement 633L Rectorseal Approved 1R 02-29-16 Detectable Muletape DT2500P Neptco Approved 1R 02-29-16 Rhino 3 Rail Rhino Conditional 1R 02-29-16 Fiberglass pull box FCA173024T-00006 Newbasis Conditional 1R 02-29-16 Detectable warning tape – Orange Presco Approved 1R 02-29-16 Survey Monuments Survey Monuments – Type B Eastern Products Foundry Approved 1R 11-20-17 Sign Post Material Sign Base / Post Desert Highway Sign Approved 1R 11-20-17 Sign Material Street Sign Desert Highway Sign Approved 1R 11-20-17 STOP Sign Desert Highway Sign Approved 1R 11-20-17 Median Nose Object Marker Desert Highway Sign Not Approved 1R 11-20-17 Street Name, Warning & Regulatory Interwest Safety Supply Not Approved 1R 08-21-18 Sign Sheeting Material Thermoplastic Striping Yellow Thermoplastic Ennis-Flint Approved 1R 06-25-18 White Thermoplastic Ennis-Flint Approved 1R 06-25-18 Glass Beads / Spheres Potters Approved 1R 06-25-18



Page 7 of 16



Preformed Pavement Marking Preformed Arrows & ONLY Legends 3M Transportation Approved 1R 06-25-18 Raised Pavement Markers (RPM’s) Hydrant Markers – Blue 2-Way Spear Construction Approved 1R 11-20-17 Hydrant Markers – Blue 2-Way Ennis-Flint Approved 1R 06-25-18 Type G Markers – Clear 1-Way Ennis Flint Approved 1R 06-25-18 Bituminous Adhesive for RPMs Martin Asphalt Company Approved 1R 06-25-18

Sewer Materials:

24” Frame & Cover 24” cover – storm and sanitary 1295 Deeter Foundry Approved 1R 07-15-13 24” ring - 1295 Deeter Foundry Approved 1R 07-15-13 30” Frame & Cover 30” cover - storm and sanitary 1296 Deeter Foundry Approved 1R 07-15-13 30” ring -1296 Deeter Foundry Approved 1R 07-15-13 48” Manhole 48” ID MH – 48MH24 Jensen Pre Cast Approved 1R 07-15-13 48” ID MH – 48MH30 Jensen Pre Cast Approved 1R 07-15-13 48” ID MH w/t flat top– 48MH30-FC Jensen Pre Cast Approved 1R 07-15-13 48” ID MH w/t flat top– 48MH24-FC Jensen Pre Cast Approved 1R 07-15-13 48“ Sanitary sewer manhole Olsen Pre cast Approved 1R 07-15-13 Fiberglass Manhole L.F. Manufacturing Not Approved 1R 07-15-13

60” Manhole 60” ID MH – 60MH30 Jensen Pre Cast Approved 1R 07-15-13 60” ID MH w/t flat top– 60MH30-FC Jensen Pre Cast Approved 1R 07-15-13 60“ Sanitary sewer manhole Olsen Pre cast Approved 1R 07-15-13 Manhole Lining System (Field Applied) Sewer Shield 100 Environmental Coatings Not Approved 1R 07-15-13 Sewer Shield 150 Environmental Coatings Not Approved 1R 07-15-13 Raven 405 Epoxy coating RLS Approved 1R 07-15-13 Sewergard 210HXB Sauereisen Approved 1R 02-28-18 Water Stop PreCast Base Gasket Kor-N-Seal I 106/406 Trelleborg Approved 1R 08-01-13



Page 8 of 16



PreCast Base 48-inch Dia. Pre-cast MH base Jensen Pre-cast Not Approved 1R 08-01-13 60-inch Dia. Pre-cast MH base Jensen Pre-cast Not Approved 1R 08-01-13 Manhole Joint Sealant Conseal CS102 Concrete Sealants Inc. Approved 1R 07-15-13 Extra Strength VCP 4” and 6” extra strength VCP Building Products Co. LLC Approved 1R 07-15-13 8” thru 30” extra strength VCP Building Products Co. LLC Approved 1R 07-15-13 8” thru 42” extra strength VCP jointed Building Products Co. LLC Approved 1R 07-15-13 4” and 6” extra strength VCP Gladding McBean Approved 1R 08-16-21 8” thru 30” extra strength VCP Gladding McBean Approved 1R 08-16-21 8” thru 42” extra strength VCP jointed Gladding McBean Approved 1R 08-16-21 Flexible Couplings Band Seal Mission Clay Products Approved 1R 07-15-13 Pipe Zone Backfill ASTM #57 Rock – AG1262-#57 Lafarge Approved 1R 07-15-13 ASTM #57 Rock - Glendale Drake Approved 1R 07-15-13 ASTM #8 AG7492-#8 Lafarge Approved 1R 10-15-13 #8 Rock – Glendale Pit Drake Materials Not Approved 1R 07-15-13 1/4"Washed rock – AG1255-0 Lafarge Not Approved 1R 07-15-13

Water Materials:

Rebar for Water Structure Pads (Spec. Section 03210) Reservoir Tyler Approved 3R 04-24-18 PRV Pump Station Tyler Approved 3R 04-24-18 Vault Structure Tyler Approved 3R 04-24-18 Valve Box & Cover (heavy duty) Slip Type Bottom VB-4622 Sigma Corp. Not Approved 1R 07-15-13 Slip Type Top VB-4621H Sigma Corp. Not Approved 1R 07-15-13 VB-4620 Lid Sigma Corp. Not Approved 1R 07-15-13 29U - Slip Type 6855 – Top & Bottom Tyler Union Approved 1R 07-15-13 Slip Type Bottom VB-4622 Tyler Union Approved 1R 07-15-13 5- ¼” OMA Drop Lid Tyler Union Approved 1R 07-15-13 VB562AHD Slip Type Valve Box Star Pipe Products Approved 2R 10-15-13 Valve Box Lid VB-0016 Star Pipe Products Approved 1R 10-15-13 6100-6114 Valve Box & Lid SIP Industries Not Approved 1R 02-27-18



Page 9 of 16



6100-6113 Valve Box & Lid SIP Industries Not Approved 2R 04-24-18 6351-6354 Valve Box Cover SIP Industries Not Approved 1R 02-27-18 6355-6356 Valve Box Cover SIP Industries Not Approved 1R 02-27-18 VBDTL198B&L (VB-0029) Star Pipe Products Approved 1R 04-04-18 Valve Extension Stem Trumbull Approved 2R 04-24-18 Polywrap Polywrap Northtown Approved 1R 07-15-13 Polywrap Trumbull Approved 1R 07-15-13 Polywrap Christy’s Approved 1R 07-15-13 Joint Restraint 6” thru 48” Mega Lug Series 1100 EBAA IRON Approved 1R 07-15-13 6” thru 16” Joint Restraints 300C Tyler Union Approved 1R 07-15-13 6” thru 48” Stargrip Series 3000 Start Pipe Products Approved 1R 07-15-13 6” thru 24” Stargrip Fieldlok 350 US Pipe Approved 1R 07-15-13 6” thru 24” Sure Stop 350 McWane Approved 1R 07-15-13 6” thru 16” Joint Restraints EZ Grip SIP Approved 1R 06-02-21 Valves 6” to 20” Gate Valve series 2638 Clow Approved 1R 07-15-13 6” to 12” Gate Valve Mueller Not Approved 1R 07-15-13 6” to 12” Gate Valve series 2500-1 American Flow Control Approved 1R 07-15-13 2” to 12” Gate Valve MJ x MJ A-2362 Mueller Approved 1R 10-15-13 4” to 12” Gate Valve MJ x FL A-2362 Mueller Approved 1R 10-15-13 16”, 20” & 24” Gate Valve MJ x MJ 2361 Mueller Approved 2R 04-24-18 6”, 8” & 12” Gate Valve MJ x MJ A2361 Mueller Approved 2R 04-24-18 6”, 8” & 12” Gate Valve FL x FL A2361 Mueller Approved 2R 04-24-18 PVC Ball Valves Spears Approved 2R 04-24-18 Stainless Steel Ball Valves Watts Approved 2R 04-24-18 Brass Ball Valves Watts Approved 2R 04-24-18 Fire Hydrants Medallion Clow Approved 1R 07-15-13 Super Centurion 250 Mueller Approved 1R 07-15-13 Pacer 250 American Flow Control Approved 1R 07-15-13 Service Saddles BR1S Series Bronze Service saddle Mueller Approved 1R 07-15-13 BR2B Series Bronze Service saddle Mueller Approved 1R 07-15-13 3845 and 3846 Service Saddles AY McDonald Approved 1R 07-15-13 3825 and 3826 Service Saddles AY McDonald Approved 1R 07-15-13



Page 10 of 16



202BS Brass Saddle Ford Approved 1R 07-15-13 202B Brass Saddle Ford Approved 1R 07-15-13 101BS Brass Saddle Ford Conditional 1R 05-17-21 J-979 Bronze Saddle Jones Conditional 1R 02-27-18 J-965 Bronze Saddle Jones Conditional 1R 02-27-18 Corporation Stops (Pac-joint) P25028N Corp Stop Ball Valve Mueller Approved 1R 07-15-13 74704B-22 Ball Style Corp Stop AY McDonald Approved 1R 07-15-13 FB1100-3x-NL Corp Stop Ball Corp. Ford Approved 1R 07-15-13 FB1100-4x-NL Corp Stop Ball Corp. Ford Approved 1R 07-15-13 FB1100-6-NL Corp Stop Ball Corp. Ford Approved 1R 07-15-13 FB1100-7-NL Corp Stop Ball Corp. Ford Approved 1R 07-15-13 E1935 Ball Type Corp James Jones Co. Approved 2R 04-04-18 Compression Fittings Straight 3 Part Union – P15403 Mueller Approved 1R 08-05-15 Pipe Couplings Flex Couplings Smith-Blair Conditional 2R 04-24-18 Restraint for Flex Couplings Smith-Blair Conditional 2R 04-24-18 Type ‘K’ Copper Pipe Type K Copper tubing Cerrotube Approved 1R 07-15-13 Type K Copper tubing Cambridge-Lee Industries Approved 1R 07-15-13 Type K Copper pipe Cerro Approved 1R 04-24-18 Type K Copper pipe solder fittings Cello Approved 1R 04-24-18 PVC 4” - 12”, C-900 DR14 pressure class 305 Vinyltech Pipe Approved 1R 07-15-13 6” – 12”, C900-07 Water Pipe DR14 North American Pipe Corp. Approved 1R 07-15-13 4” – 12”, C900 Water Pipe Diamond Plastics Conditional 1R 07-15-13 4” - 12”, C-900 DR14 pressure class 305 Waterworks Pipe Approved 1R 07-15-13 4” – 12” C-900 DR14 Diamond Plastics Approved 2R 04-04-18 CPVC Sch. 80 Pipe & Fittings Spears Approved 1R 04-24-18 PVC Sch. 80 Pipe & Fittings Spears Approved 1R 04-24-18 Ductile Iron Pipe 6” thru 48” class 350 DIP Tyton Joint Tyton Joint Pipe Approved 1R 07-15-13 6” thru 48” class 350 DIP Fastite Joint Tyton Joint Pipe Approved 1R 07-15-13 3” thru 12” class 350 DIP Pacific States Pipe Approved 1R 07-15-13



Page 11 of 16



4” thru 36” Class 350 DIP TR Flex Approved 2R 04-04-18 Ductile Iron Pipe Fittings 6” thru 48” Flanged Fittings Star Pipe Products Approved 1R 07-15-13 6” thru 48” Class 350 MJ Fittings Star Pipe Products Approved 1R 07-15-13 6” thru 48” Class 350 MJ Fittings Sigma Corp. Approved 1R 07-15-13 6” thru 48” Flanged Fittings Sigma Corp. Approved 1R 07-15-13 6” thru 48” Class 350 MJ Fittings Tyler Union Approved 1R 07-15-13 6” thru 48” Flanged Fittings Tyler Union Approved 1R 07-15-13 6” thru 48” Compact MJ Fittings SIP Industries Approved 1R 02-27-18 6” thru 48” Flanged Fittings SIP Industries Approved 2R 06-02-21 Flange Gaskets 6” thru 48” Full face Flange-Tyte Gasket US Pipe Approved 1R 06-02-21 Angle Meter Stops (Pac-joint) P24258N Angle meter ball valve Mueller Approved 1R 07-15-13 74602B-22 Ball Style meter Stop AY McDonald Approved 1R 07-15-13 BA43-3xxW-NL Angle meter ball valve Ford Approved 1R 07-15-13 BA43-444W-NL Angle meter ball valve Ford Approved 1R 07-15-13 BFA43-666W-NL Angle meter ball valve Ford Approved 1R 07-15-13 BFA43-777W-NL Angle meter ball valve Ford Approved 1R 07-15-13 E1963W Ball Angle Meter Valve James Jones Co. Approved 2R 04-04-18 E1975W Ball Angle Meter Valve James Jones Co. Approved 2R 04-04-18 E1900 Ball Type Curb Valve James Jones Co. Approved 2R 04-04-18 Water Meter Boxes P6001834A Rotocast meter box Armorcast Approved 1R 07-15-13 P6001835A Rotocast meter box Armorcast Approved 1R 07-15-13 P6001534AX12DZ Rotocast meter box Armorcast Approved 1R 07-15-13 Tracer Wire 1030B #10 CCS wire Coppperhead Industries Approved 1R 07-15-13 UF / Type TWU 600 Volt Copper Service Wire Co. Not Approved 1R 02-27-18 600V / 10AWG PE Tracer Wire Kris-Tech Wire Company Approved 1R 04-04-18 Tracer Wire Connections Model 61, 62, and 63 Wire Nut Ideal Approved 1R 07-15-13 Magnetized tracer box Conc. D/W Box Copperhead Industries Approved 1R 11-19-13 Magnesium Anode – 5S3 Corrpro Approved 1R 11-19-13 Tapping Sleeve



Page 12 of 16



H-615 MJ tapping Sleeve for DIP or CIP Mueller Approved 1R 07-15-13 H-619 MJ tapping Sleeve for ACP Mueller Not Approved 1R 07-15-13 6” thru 12” Series 2800-A tapping Sleeve American Flow Control Approved 1R 07-15-13 Casing Casing Pipe ERW grade B Tri Star Approved 1R 07-15-13 Casing Spacers Casing Spacer SSI8 APS Inc. Approved 1R 07-15-13 Casing Spacer SSIM APS Inc. Approved 1R 07-15-13 Casing Spacer SSI12 APS Inc. Approved 1R 07-15-13 Casing Spacer Model CSS8 CCI Pipeline Systems Approved 1R 07-15-13 Casing Spacer Model CSS12 CCI Pipeline Systems Approved 1R 07-15-13 Casing Insulators Casing Insulator Model CI APS Inc. Approved 1R 07-15-13 Casing End Caps APS Model AW Casing End Seal APS Inc. Approved 1R 07-15-13 APS Model AWN Casing End Seal APS Inc. Approved 1R 07-15-13 APS Model AC Casing End Seal APS Inc. Approved 1R 07-15-13 APS Model ACN pull on Casing End Seal APS Inc. Approved 1R 07-15-13 APS Model AZP Casing End Seal APS Inc. Approved 1R 07-15-13 APS Model AM Casing End Seal APS Inc. Approved 1R 07-15-13 Casing End Seal model ESW & ESC CCI Pipeline Systems Approved 1R 07-15-13 Double Check Valves Series 757, and 757N Lead Free Watts No Comment Series 957, 957N and 957Z Lead Free Watts No Comment Model 450 N Pattern Wilkins No Comment Model 350ASTDA Zurn Wilkens Approved 1R 04-30-18 Air Release Valve 36” Dia. FRP manhole L.F. Manufacturing Not Approved 1R 07-15-13 D-040-C ARV ARI Approved 1R 07-15-13 Water Quality Sampling Station Eclipse No. 88 Kupferle Foundry Corp. Not Approved 1R 02-27-18 Station Guard XLT Koraleen Enterprises Approved 1R 03-12-18 Eclipse No. 88WC-SS Kupferle Foundry Corp. Approved 1R 04-04-18 RPDA Backflow



Page 13 of 16



Series 009 Watts No Comment Model RPLF4A Lead Free Apollo No Comment Model RPLF4A Lead Free Apollo No Comment Model RPDALF4A Lead Free Apollo No Comment Model RPDA2LF4A Lead Free Apollo No Comment Model DCLF4A Lead Free Apollo No Comment Model DCLF4A Lead Free Apollo No Comment Model DCDALF4A Lead Free Apollo No Comment Model DCDA2LF4A Lead Free Apollo No Comment Model 375ASTOSY Zurn Wilkens Conditional 1R 04-11-18 Model 975XL2SEU Zurn Wilkens Conditional 1R 04-11-18

Conditional Items:

• 12-60 inch HDPE by ADS – HDPE pipe is not allowed within the right of way in Buckeye. This material is only approved outside of the right of way.

• 4” – 12”, C900 Water Pipe by Diamond Plastics – DR14 is the only type of pipe approved for use in Buckeye.

• Hi-Tech Detectable warnings by Tek Way – The tiles shall be Terracotta in color. • 2 ½” 90° Elbow JM Eagle – A 90° elbow cannot be used for ITS bends. The larger diameter 24” sweeps

shall be used. • 3” 90° Elbow JM Eagle – A 90° elbow cannot be used for ITS bends. The larger diameter 24” sweeps shall

be used. • Rhino 3 Rail by Rhino – The colors and decals on the marker shall be utility appropriate. • Fiberglass pull box FCA173024T-00006 by Newbasis – The name plate shall read “ITS COB”. • 18 inch PVC by Vinyltech – PVC storm drain pipe is not allowed within the right of way in Buckeye. This

material is only approved outside of the right of way. • Storm Drain Manhole Frame & Cover – Deeter Foundry, Inc. – Update the City of Buckeye (COB) logo per

COB DTL 41260 Addendum #S1 • J-979 Bronze Saddle with Double Bronze Strap – Jones – Bronze Straps for DIP only per COB EDS

3-1.505.D.4 • J-965 Bronze Saddle with Single Stainless Steel Strap – Jones – Stainless Steel Straps for PVC only per

COB EDS 3-1.505.D.4 • 101BS Brass Saddle by Ford - Stainless Steel Straps for PVC only per COB EDS 3-1.505.D.4 • Zurn Wilkens – Reduced Pressure Principle Backflow – Model 375ASTOSY – 8” RPBFP –Reduced

Pressure Backflow Assemblies are not permitted on the fire lines. • Zurn Wilkens – Reduced Pressure Principle Backflow – Model 975XL2SEU – 1 ½” RPBFP – Per the COB

EDS DTL 31353 four test cocks with brass plugs or adaptors with caps installed are required. • Pipe Couplings by Smith-Blair – for use above ground only. • MAG ½” Gyratory – Plant 4 El Mirage – Southwest Asphalt – acceptable for surface course for major

arterials, arterials, major collector and collector roads.



Page 14 of 16



• MAG ½” Gyratory – Plant 10 New River – Southwest Asphalt – acceptable for surface course for major arterials, arterials, major collector and collector roads.

• MAG ¾” Gyratory – Plant 4 El Mirage – Southwest Asphalt – acceptable for base course for major arterials, arterials, major collector and collector roads.

• MAG ¾” Gyratory – Plant 10 New River – Southwest Asphalt – acceptable for base course for major arterials, arterials, major collector and collector roads.

• MAG ½” Marshall – Plant 4 El Mirage – Southwest Asphalt – acceptable for surface course for major collector, collector, major local and local roads.

• MAG ½” Marshall – Plant 10 New River – Southwest Asphalt – acceptable for surface course for major collector, collector, major local and local roads.

Not Approved: • MAG A 1” machine 23008122 by Hanson Materials - Please provide current compression strength results

as well as the mix design on the next review. • MAG A 1” machine 23008122 - plant 67 by Hanson Materials - Please provide current compression

strength results as well as the mix design on the next review. • 2000 PSI MAG c W/Fly ash 220400 by Drake Materials - Please provide current compression strength

results as well as the mix design on the next review. • Circular flared end section by Pre Cast Concepts – Pre cast end section are not allowed in Buckeye. Use the

MAG 501-3 Modified headwall. • 1/4"Washed rock – AG1255-0 by Lafarge – The submittal does not have a specification range. Also per

ASTM there is not a ¼ inch size number. Please choose from the number 8 or the number 89 per ASTM D448-12.

• Fiberglass Manhole by L.F. Manufacturing – Fiberglass manholes have not yet been approved for use in Buckeye.

• 36” Dia. FRP manhole by L.F. Manufacturing – FRP manholes are not allowed for AVR manholes. They must be reinforced concrete pre cast sections.

• Sewer Shield 100 by Environmental Coatings LLC – All manhole lining systems shall be spray applied within the Town of Buckeye.

• Sewer Shield 150 by Environmental Coatings LLC – All manhole lining systems shall be spray applied within the Town of Buckeye.

• 2000 PSI MAG CW/Fly ash 1” 1555624 by Cemex - Please provide current compression strength results as well as the mix design on the next review. There is only 1 sample that was tested in 2012.

• 6” to 12” Gate Valve by Mueller – The submittal is showing push on valves. These are not allowed in Buckeye. Please provide a clearer or larger drawing for the next review.

• H-619 MJ tapping Sleeve for ACP by Mueller – The Town of buckeye requires when dealing with AC pipe that the pipe be removed to the nearest joint if exposed. There will never be a tap into AC pipe.

• Slip Type Bottom VB-4622 by Sigma Corp. – The Buckeye Water department is no longer approving Sigma valve boxes.

• Slip Type Top VB-4621H by Sigma Corp. - The Buckeye Water department is no longer approving Sigma valve boxes.

• VB-4620 Lid by Sigma Corp. - The Buckeye Water department is no longer approving Sigma valve boxes.



Page 15 of 16



• Pre-Cast Base by Jensen Pre-cast - Per the gravity sewer requirements (TOB 4-1.205 H) the bases are supposed to be monolithically cast and shall have a floatation ring on the bottom. The submittals do not show any of this on them.

• 60-inch Dia. Pre-cast MH base by Jensen Pre-cast - Per the gravity sewer requirements (TOB 4-1.205 H) the bases are supposed to be monolithically cast and shall have a floatation ring on the bottom. They are also supposed to have a structural design which means each submittal shall be sealed by a registered professional engineer. The submittals do not show any of this on them.

• 48-inch Dia. Pre-cast MH base by Jensen Pre-cast - Per the gravity sewer requirements (TOB 4-1.205 H) the bases are supposed to be monolithically cast and shall have a floatation ring on the bottom. They are also supposed to have a structural design which means each submittal shall be sealed by a registered professional engineer. The submittals do not show any of this on them.

• MiraDrain 2000 Geocomposite Wall Drain by Carlisle – This material will be used in conjunction with an ADOT designed structure. This material must be on the ADOT approved list of materials.

• MAG ABC - Peoria Plant by South West Rock Products – Per the MAG standards, Base materials shall meet the properties listed in Table 702-1. This submittal is missing the resistance to degradation (LA Abrasion) test.

• 2nd request - MAG ABC 4118 by Sun City Aggregate – Per the ADOT specifications class 1 thru 4 aggregates shall have a fractured face of at least 30%. Class 1 thru 4 aggregates shall also have a resistance to abrasion (LA abrasion) test performed. Please meet all of the ADOT requirements for approval.

• MAG ABC PO#315076 – North Pile from Kilauea Crushers – Provide Fractured Faces Test results that are less than 12 months old.

• Rip-Rap – D50 = 6” – Mountain Vista Brown – Image Trucking – Provide information regarding MAG Section 703.2 Physical Properties

• MAG ABC (16272) – Vulcan – Sun City Quarry – Provide L.A. Abrasion test results and date sampled information.

• Median Nose Object Marker – Desert highway Sign – Provide a detail for the OM-3L and address proposed sign sheeting

• 3000 PSI MAG A Flowable 13054HR by Arizona Materials – Unless there is a very good reason for having a flowable concrete Buckeye does not accept concrete mixes with plasticizers.

• Hand Rail – Specialty Companies – Per the approved plans, the Hand Rail is to be per the COB EDS DTL B-110 (not the MAG DTL)

• UF / Type TWU 600 Volt Copper – Service Wire Co. – Per COB EDS 3-1.505.I.2 35mm polyethylene insulation is required

• 6” thru 48” Flanged Fittings – SIP Industries – Per COB EDS 3-1.505.G.2 350psi fittings required for sizes up to 24”.

• E1935 Ball Type Corp Valve – James Jones Co. – Per COB EDS 3-1.505.D.1 Lead free brass required • E1963W Ball Angle Meter Valve – James Jones Co. – Per COB EDS 3-1.505.D.1 Lead free brass required • E1975W Ball Angle Meter Valve – James Jones Co. – Per COB EDS 3-1.505.D.1 Lead free brass required • E1900 Ball Type Curb Valve – James Jones Co. – Per COB EDS 3-1.505.D.1 Lead free brass required • 6100-6114 Valve Box & Lid – SIP Industries – Per COB EDS 3-1.505.H required to be asphaltic

bituminous coated, rated heavy duty and a minimum of a 4” deep 12 pound lid.



Page 16 of 16



• 6351-6354 Valve Box Cover – SIP Industries – Per COB EDS 3-1.505.H required to be asphaltic bituminous coated, rated heavy duty and a minimum of a 4” deep 12 pound lid.

• 6355-6356 Valve Box Cover – SIP Industries – Per COB EDS 3-1.505.H required to be asphaltic bituminous coated, rated heavy duty and a minimum of a 4” deep 12 pound lid.

• Eclipse No. 88 Water Quality Sampling Station – Kupferle Foundry – Per COB EDS STD DTL 31375 water quality sampling stations are to be Kupferle model #88WG or approved equal.

• 6100-6113 Valve Box & Lid – SIP Industries – the City no longer uses the MAG 391-1 Type A valve box and cover: per City addendum the valve box and cover must comply with MAG 391-2.

• Catch Basin Grate – Bar T Equipment Service – The City of Buckeye does not permit catch basins with grates within the right-of-way.

• MAG ABC – Kilauea Crushers PO# 316834 – Buckeye Hills Stockpile – Out of specification on the 1” sieve

• MAG ABC (Lime Treated) – Southwest Rock Products – Lime Treated ABC is not acceptable • MAG ¾” Marshall – Plant 4 El Mirage – Southwest Asphalt – No COB road classification pavement

requirements allow ¾” Marshall mix. • MAG ¾” Marshall – Plant 10 New River – Southwest Asphalt – No COB road classification pavement

requirements allow ¾” Marshall mix. • Street Name, Regulatory, Warning & Object Marker Signs – Interwest Safety Supply – Provide an exhibit

of the sign locations and cross-reference the location with the material submittal; see onsite street sign plan. Revise the spelling of “Taro” Drive.

The items that are noted as "Not Submitted" are required to be submitted, reviewed, and approved prior to construction. The contractor shall not deviate from the items on this list. Any material change shall be submitted to the City of Buckeye for review and approval.

Documents

Drainage Materials