Dragspecialties 2011 Update

PRINTED IN THE U.S.A. 9901-1137 FATBOOK UPDATEFATBOOK UPDATEFATBOOK UPDATEFATBOOK UPDATE

We’ve called this build, “Book Smart and Street Wise” in our advertising. That is because Tom has combined his feel for what is HOT out on the streets,along with his knowledge of everything that is COOL in the FatBook™,to create a custom that rides right, looks great and makes people think twiceto try and figure out just what Tom did.

Combined with the 2011 OldBook™ and OldBook™ update catalogs for pre-Evolution models, you have the premiere sources for all of your V-Twin customers. Be sure to use them all.

This 2011 FatBook™ Update includes new products and updated information for the Evolution through Twin Cam models so be sure to keep it with your 2011 FatBook™

All model designations and applications used herein are determined by the manufacturer as USA-specific. Contact the individual manufacturer for additional international model information.

TOM MOTZKOVendor Development and Bike Builder

FATBOOK™ UPDATE

All part numbers in BOLD MAGENTA are new for 2011.

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 1

3

PART # DESCRIPTION SUG. RETAILFOR 96-11 FLHT/FLHX AND H-D FL TRIKES2310-0362 6” Air Force Sky $99.952310-0363 6” Air Force Ground 99.952310-0364 6” Navy 99.95

PART # DESCRIPTION SUG. RETAILFOR 96-11 FLHT/FLHX AND H-D FL TRIKES (CONT)2310-0359 8” Air Force Sky $99.952310-0360 8” Air Force Ground 99.952310-0361 8” Navy 99.95

WINDSCREENS•True OEM-quality, direct-replacement windscreens•Extremely tough and custom-molded from premium Lexan® polycarbonate with FMR hard coating; the universally accepted material choice of the OEM motorcycle industry

•Gain improved wind protection without sacrificing looks with options taller than stock•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2310-0358 For 98-11 FLTR, FLTRX models $199.95

12” FLARE™ WINDSHIELD•Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields

•Lexan® Polycarbonate with FMR hard coating is used to create these custom-molded designs with unmatched durability

•Predrilled for easy mounting using stock windshield hardware•12” windshield is available in dark smoke•Made in the U.S.A.

NOTE: Patent Pending.

2310-0359

2310-0360 2310-0361

Wind tunnel designed and tested


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 2

4

SP FAIRING•Bagger owners can now stand out from the pack without abandoning the styling cues of a traditional bagger

•Aggressive stand-out styling with low, integrated sport windscreen•Factory-level quality and construction at an affordable price•Custom thermo-formed from automotive polymers for unmatched fit and finish•Lightweight; will not affect handling characteristics•High-gloss vivid black painted finish on the outer fairing; leave it black or have it custom painted to match your bike

•Premium powder-coated, heavy-gauge steel brackets provide a secure attachment to your bike•Ships completely assembled•Simple, solid and secure 4-fastener installation and removal

NOTE: FLSTC, FLSTF and FLSTN models require adapter kit, PART #2320-0050; sold separately, see 2011 FatBook

PART # DESCRIPTION SUG. RETAIL2330-0078 For 94-11 FLHR (except FLHRS) $649.95

DELUXE NECK COVER KIT•Add brilliance to a dull area with these smooth, quickly installed chrome covers that shroud the neck and extend down the frame

•Includes two snap-on down tube pieces that add coverage almost all the way down to the floorboard mounts

PART # DESCRIPTION SUG. RETAIL0504-0194 For 95-07 FLHT, FLHR, FLTR, FLHX $199.95

BILLET SADDLEBAG EXTENSIONS•Chrome-plated, billet aluminum extensions create a custom look

•Easy bolt-on installation to any 93-11 FL model with hard saddlebags

•No painting required•Available with or without exhaust cut-outs for single or dual exhaust systems•Available in chrome plated or black powder coat finish with contrasting machined grooves•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILCHROME3501-0696 W/cut-outs, for dual exhausts $399.953501-0697 W/cut-out, for right exhaust 399.953501-06981 W/o cut-out 399.95

PART # DESCRIPTION SUG. RETAILBLACK3501-0699 W/cut-outs, for dual exhausts $399.953501-0700 W/cut-out, for right exhaust 399.953501-07011 W/o cut-out 399.951 For use with short turn down mufflers.

DEEP CUT FRONT SPEAKER GRILLES•Made of 6061 T-6 billet aluminum•Sold in pairs•Made in the U.S.A.

RAD II MICRO-MIRRORS•Small and stylish black powder-coated die-cast mirrors

•Measure 41/2” W x 11/2” H•Direct replacement on 06-11 FLHX/FLHXXX and also easily custom-fit on other Bagger models with fairings

•Sold in pairsPART # DESCRIPTION SUG. RETAILFOR 96-11 FLHT/FLHX AND H-D FL TRIKE MODELS4405-0240 Chrome $139.954405-0239 Black 139.95

PART # DESCRIPTION SUG. RETAIL0640-0506 For 06-11 FLHX/FLHXXX $89.95

4405-0240

3501-0696

3501-0697

3501-0698

3501-0699

4405-0239


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 2

5

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT/FLHR/FLTR/FLHX3501-0693 Chrome $379.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT/FLHR/FLTR/FLHX (CONT)3501-0694 Black $264.95

BUFFALO SADDLEBAG BARS WITH GUARDS•Protect your saddlebags from bumps and bruises•Bag rail system incorporates our 11/4” saddlebag bars with the additional strength and style of two 1” rear guards that wrap fluidly around the back of the saddlebag

•Made of structural steel tubing•Chrome or black powdercoat available•Made in the U.S.A.

SADDLEBAG/SIDE COVER ACCENTS FOR TOURING MODELS WITH HARD BAGS•Create a flowing, sweeping look with these streamlined chrome accents•Work with the contours of the saddlebags•Designed to be used without saddlebag rails

•Peel-and-stick installation•Sold as a set of six pieces

PART # DESCRIPTION SUG. RETAIL2030-0559 For 97-08 FLT/FLHT $29.95

LICENSE PLATE BAR ELIMINATOR•Preserve the stock saddlebag support brackets when removing the license plate support tube

•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0504-0198 For 97-07 FLHT,

FLHR, FLTR, FLHX $59.95

CLEAR SADDLE SHIELDS•Frame-mounted polycarbonate shields help beat engine heat

•Dissipate and re-direct engine heat away from the rider

•Make riding on those hot summer days bearable

•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 06-11 FLHX MODELS4301-0144 Black/red $149.954301-0145 Black/orange 149.954301-0146 Black/blue 149.954301-0147 Black/silver 149.954301-0148 Black/charcoal 149.95

PART # DESCRIPTION SUG. RETAILFOR 06-11 FLHX MODELS (CONT)4301-0149 Red/black $149.954301-0150 Orange/blue 149.954301-0151 Blue/black 149.954301-0152 Silver/black 149.954301-0153 Charcoal/black 149.95

FLHX STRIPES YOUR WAY™•Bored with the mono-chrome color scheme seen on every other Street Glide? We are too. Now you can stripe your bike your way

•Hell’s Foundry has created a complete kit that will transform the look of your Street Glide in minutes

•Seven-piece kit includes stripes for the saddlebags, fuel tank, fairing and side covers

•This will be the easiest change you’ll make for such dramatic results•Made in the U.S.A.

4301-0144 4301-0145

4301-0146 4301-0147

4301-0148 4301-0149

4301-0150 4301-0151

4301-0152 4301-0153

4301-0150

3501-0693

3501-0694

PART # DESCRIPTION SUG. RETAIL3501-0656 For 93-08 FLT, FLHT, FLHR, FLTR, FLHX $129.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 2

6

PART # DESCRIPTION SUG. RETAIL3550-0128 For 97-08 FLHT, FLHR, FLTR and FLHX equipped

with H-D® two-up or solo detachable Tour-Pak, or King or Chopped Tour-Pak $139.95

RELOCATOR KIT FOR DETACHABLE TOUR-PAK®

•Shifts the range of adjustment on the Tour-Pak® 2” further back than stock•Can select a position 2” back, 3” back or 4” back relative to the original full-forward position

•Chrome finish, includes hardware•Not compatible with H-D original Detachable Tour-Pak Rack design (OEM #53107-96)

FITS MODEL PART # SUG. RETAILFor 00-11 FLSTC, FLSTF, FXST, FXSTS, FXSTD, FLSTS (w/ stock engine guard bar) 1624-0238 $129.95For 86-11 FLT, FLHT, FLHR, FLTR/I, FLHX 1624-0239 129.95

FOG DAWG HIGHWAY BAR RAIN GUARDS•Made of top-quality leather-touch vinyl; looks like leather, lasts longer and requires no special maintenance or treatment (cleaning requires only soap and water)

•Feature cutout for fog lights and a storage pocket•Minimize cold updrafts•Repel road spray from front wheel and flared front fender•Keep bug juice off motorcycle chrome and legs•Allow engine cooling; no temperature restriction•Easy on-and-off; three snaps, belt clip and hook-and-loop attachments•Does not affect bike handling•Brass and stainless steel snaps won’t rust•Nylon thread makes for the strongest product you can buy•Accommodates all standard footpeg settings; 6-inch opening•Sold as a set•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1510-0163 For 80-11 Dresser models with King, Chopped or Razor Tour-Pak $99.95

TOUR-PAK LUGAGE RACK•Chrome plated 1/2” tubing construction•Measures 201/2” W x 141/8” L x 31/2” H•Includes mounting hardware

PART # DESCRIPTION SUG. RETAIL3902-0093 For 11 FLHTCUTG/FLHXXX models $299.95

TRAILER HITCH FOR H-D TRIKE MODELS•Super-strong receiver type hitch fabricated from laser cut steel, hand welded, then powder coated

•Bolts directly to frame in minutes•Receiver is almost completely hidden and tongue installs easily using a hitch pin and clip

•Hitch made to be used with or without Harley-Davidson’s optional rear bumper

•Tongue and 17/8” ball are triple chrome plated•Tongue height measures 11” to accommodate most trailers•Includes plug-and-play wire harness and all necessary hardware•Made in the U.S.A.

1624-0238


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 3

7

S4 RIGID-MOUNT SPECIFIC-FIT QUICK-DISCONNECT SADDLEBAGS WITH INTEGRATED LED MARKER LIGHTS•Saddlebags feature high/low red LED marker lights with clear lenses for a clean custom look•Desperado has polished stainless steel bezels with clear lenses and features chrome studs and three straps with buckles

•Drifter has titanium black chrome bezels with clear lenses and features smooth, clean and uncluttered styling with three straps and buckles•Includes wires, connectors, support hardware and resistors (if needed) to balance bike’s signal flash rate•A truly portable luggage system, handles included; designed for heavier loads and maximum durability•Specially built to fit bike perfectly•Made of rugged leather-grain weather-resistant SaddleHyde with a molded plastic frame that slips over posts directly mounted to the fender struts•Remove saddlebags easily by releasing two QTL (Quarter Turn Locking) pins found inside each bag

•Lockable, quick-release hidden buckles under each strap are easy to use; protect contents and prevent unauthorized removal of bags from bike

•Include a chromed metal support that fits behind each bag for extra strength and security (also easily removed when bags are not to be used for extended period)

•Inner stiffeners and rigid back maintain bag shape even when empty

•All necessary hardware, including turn signal relocators (if needed), and instructions are included

•Ready to bolt on•Lighting not DOT approved

DESCRIPTION PART # SUG. RETAILDRIFTER W/ LED (TITANIUM BLACK CHROME BEZEL)For 84-11 FXST/FLST (except FXSTD/FLSTF/ FLSTN/FLSTSB w/ OEM high exhaust) (20” L x 61/2” W x 12” H) 3501-0682 $449.95For 96-11 Dyna Glide (18” L x 51/2” W x 101/2” H) 3501-0684 449.95For 94-11 XL (except 883N/1200S/N/X) (18” L x 51/2” W x 101/2” H) 3501-0686 449.95

DESCRIPTION PART # SUG. RETAILDESPERADO W/ LED (SILVER BEZEL)For 84-11 FXST/FLST (except FXSTD/FLSTF/ FLSTN/FLSTSB w/ OEM high exhaust) (20” L x 61/2” W x 12” H) 3501-0683 $459.95For 96-11 Dyna Glide (18” L x 51/2” W x 101/2” H) 3501-0685 459.95For 94-11 XL (except 883N/1200S/N/X) (18” L x 51/2” W x 101/2” H) 3501-0687 459.95

RIGID-MOUNT SPECIFIC-FIT TEARDROP SADDLEBAGS WITH INTEGRATED LED MARKER LIGHTS•Saddlebags feature high/low red marker lights with clear lenses for a clean, custom look

•Drifter bags have a smooth, clean and uncluttered look and lights with titanium black chrome bezels

•Desperado bags feature chrome studs with polished stainless steel bezels•Includes wires, support hardware and resistors (if needed) to balance bike’s flash rate

•Saddlebags are pre-fitted and sized correctly for rigid mounting to specific bikes•Made of rugged leather-grain, SaddleHyde with a hard backside. Turn signal relocator bracket included (if necessary)

•All hardware and chrome saddlebag supports included for rigid mounting; can upgrade to Saddlemen S4 Quick Disconnect Docking Post Kit (sold separately)

•Lighting not DOT approved

PART # DESCRIPTION SUG. RETAILFOR 93-11 FLHT/FLHX/FLHR/FLTR MODELS W/ OEM BAGS3501-0690 Extended saddlebags $1,199.953501-0691 Exhaust filler plug, left-side 44.953501-0692 Exhaust filler plug, right-side 44.95

EXTENDED SADDLEBAGS•Replace stock H-D bags, with a custom stretched look•Made of heavy-duty ABS plastic•Feature exhaust cutouts on each side; single exhaust bikes need exhaust filler plug for side without exhaust (sold separately)

•Pre-drilled and ready for paint; no bodywork needed•Accept stock H-D lids and components (not included)•Saddlebags sold in pairs; filler plugs sold each•Made in the U.S.A.

3501-0678

3501-0677

Internal Quarter Turn Locking fastener

Quarter Turn Locking fastener disconnected

3501-0684

3501-0685

3501-0690

3501-0692

3501-0691

DESCRIPTION PART # SUG. RETAILDRIFTER W/ LED (TITANIUM BLACK CHROME BEZEL)For 84-11 FXST/FLST; except FXSTD/FLSTF/FLSTN/FLSTSB w/ OEM high exhaust (21” L x 71/2” W x 15” H) 3501-0676 $559.95For 96-11 Dyna Glide (19” L x 7” W x 14” H) 3501-0678 559.95For 94-11 XL (except 883N, 1200S/N/X) (19” L x 7” W x 14” H) 3501-0680 559.95DESPERADO W/ LED (SILVER BEZEL)For 84-11 FXST/FLST; except FXSTD/FLSTF/FLSTN/FLSTSB w/ OEM high exhaust (21” L x 71/2” W x 15” H) 3501-0677 569.95For 96-11 Dyna Glide (19” L x 7” W x 14” H) 3501-0679 569.95For 94-11 XL (except 883N, 1200S/N/X) (19” L x 7” W x 14” H) 3501-0681 569.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 3

8

PART # 3501-0644

SLANT FLAP-OVER STYLE SADDLEBAGS WITH RIVETS•Slant-styled saddlebags with easy-opening flap style lid features an aerodynamic shape to fit most bikes

•Adjustable lace-together yoke ensures a perfect fit•Great-looking leather-grained materials are water, weather and sun resistant

•Bags retain shape even when empty•Strong, braided nylon tie-down cords secure bags to bike•Saddlebag supports are highly recommended; maximum weight per side is 10 lb.

•Durable, nickel-plated buckles and D-rings•Made in the U.S.A.

NOTE: Length is measured diagonally.

PART # 3505-0158

LARGE TRUNK RACK BAG WITH RIVETS•Dual-mount trunk attaches to racks or sissybar with easy-to-use hook-and-loop fasteners and quick-release buckles

•Great-looking leather-grained material construction resists water, weather and the sun

•Three large, exterior pockets for easy access to gear while on bike•Convenient clamshell-style main compartment retains shape even when empty, so it always looks good on your bike

•Includes detachable windshield tool bag•Durable, nickel-plated conchos, buckles and D-rings•Measures 12.5” L x 14” W x 13” H (not including exterior pockets)•Made in the U.S.A.

SUG. RETAIL ...............................$159.95SUG. RETAIL ..................$89.95

81/905 LARGE TRUNK RACK BAGS•Dual-mount trunk attaches to racks or sissybar with easy-to-use hook-and-loop fasteners and quick-release buckles•Great looking leather-grained material construction resists water, weather and the sun•Convenient clamshell-style main compartment retains shape even when empty, so it always looks good on your bike•Includes detachable windshield tool bag•durable, nickel-plated conchos, buckles and D-rings•Available in plain or studded versions•Measures 12.5” L x 14” W x 13” H•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3501-0671 For Big Twin models $399.953501-0673 For XL models 399.95

SIXER SADDLEBAGS•Injection-molded, hard ABS plastic makes them durable and weather resistant

•Satin black paintable finish•Secure and lockable (keys included)•Push-button locks with a sleek profile design•Includes Alloy Tech multi-fit brackets that allow a nice close, snug fit to bike

•Each bag measures 123/4” H x 181/2” W x 81/2” D•Bags and brackets sold as pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3501-0695 For 10-11 FXDWG $129.95

CHROME SADDLEBAG SUPPORT BRACKETS•For use with throw-over type saddlebags; brackets hold bags away from the brake caliper and swingarms

•Mount onto the fender struts•Mounting hardware included•Sold in pairs•Made in the U.S.A.

NOTE: Not compatible with OEM detachable sissy bar/luggage rack.

3501-0671

DESCRIPTION PART #Plain 3505-0159

DESCRIPTION PART #Studded 3505-0160

SUG. RETAIL .....................$149.95

3505-0159 3505-0160

Rear view

Rear view


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

9

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLHRC, FLTR, FLHX, FLHTC, FLHTCU MODELS (EXCEPT FLHRS/SE) (23” L OVERALL X 18” W X 13/4” H)0801-0594 Smooth $239.950801-0595 Flame stitch 249.950801-0596 Black pinstripe 249.95

PART # DESCRIPTION SUG. RETAILFOR 97-07 FLHR, 06-07 FLHX MODELS (EXCEPT FLHRS/SE) (233/4” L OVERALL X 12” W X 11/2” H)0801-0588 Smooth $239.950801-0589 Flame stitch 249.950801-0590 Black pinstripe 249.95

LOW-PROFILE SOLO SEATS•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Flexible urethane foam for maximum comfort•3/16” ABS thermoformed seat base with carpeted bottom and rubber bumpers to protect paint

•New EZ Mount system requires no tools for taking seat on and off

•Seat geometry places rider further back and up to 11/2” lower (depending on model) than stock seat

•Lower position creates better rider position with improved styling•Seat covers the two seat fender studs for a low, clean look•Includes mounting hardware•Made in the U.S.A.

NOTE: 97-07 FLHR/FLHX seats will also fit 97-07 FLT/FLHT/FLTR models when used with lower dash extension PART #2202-0070.

SOLAR

REFLECTIVE

0801-0594 0801-0595

0801-0596 0801-0588

0801-0589 0801-0590

FOR DRESSER/TOURING

EZ Mount system


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

10

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLHRC, FLTR, FLHX, FLHTC, FLHTCU MODELS (EXCEPT FLHRS/SE) (23” L OVERALL X 18” W X 13/4” H)0801-0597 Smooth $239.950801-0598 Flame stitch 249.950801-0599 Black pinstripe 249.95

PART # DESCRIPTION SUG. RETAILFOR 97-07 FLHR, 06-07 FLHX MODELS (EXCEPT FLHRS/SE) (233/4” L OVERALL X 12” W X 11/2” H)0801-0591 Smooth $239.950801-0592 Flame stitch 249.950801-0593 Black pinstripe 249.95

LOW-PROFILE SOLO SEATS WITH FORWARD POSITIONING•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Seat geometry moves rider forward 2” compared to standard Low-Profile Solo; moves rider forward 1” compared to a stock Streetglide or Road Glide seat

•Flexible urethane foam for maximum comfort•3/16” ABS thermoformed seat base with carpeted bottom and rubber bumpers to protect paint

•New EZ Mount system requires no tools for taking seat on and off•Lowers rider up to 11/2” than stock seat depending on model•Lower position creates better rider position with improved styling•Seat covers the two seat fender studs for a low, clean look•Includes mounting hardware•Made in the U.S.A.

NOTE: 97-07 FLHR/FLHX seats will also fit 97-07 FLT/FLHT/FLTR models when used with lower dash extension PART #2202-0070.

SOLAR

REFLECTIVE

FOR DRESSER/TOURING

0801-0591

0801-0592 0801-0593

0801-0597 0801-0598

0801-0599

EZ Mount system


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

11

TODD’S CYCLE SIGNATURE SEAT•The ultimate low-profile bagger seat designed by Todd’s Cycle

•Lower position helps rider touch the ground with added confidence

•Slim, supportive bucket seat and contoured passenger section

•Variable density foam and SaddleGel interior eases tailbone pressure and increases riding comfort

•Contrasting carbon fiber and SaddleHyde cover textures•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 06-07 FLHX, 97-07 FLHR (EXCEPT FLHRS)0801-0600 Black $399.95

ONE-PIECE HEATED TOURING SEATS•Dual-zone high/low heat settings for driver and passenger right on the side of the seat

•Illuminated switches•Does not require any OE controllers or switches to function•Constructed with extra rugged, triple-layered fiberglass•Wire harness hooks to accessory port in front of battery; seat has power only when the ignition key is turned on and accessory toggle switch below the handlebars is flipped up

•Mustang’s one-piece touring design provides the rider and passenger with the fullest, most comfortable seat possible•Baseplate is open in the middle to accept a Mustang or stock H-D driver backrest kit•17” W front bucket, 14” W rear seat•Seat will fit with a handrail•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLTR, FLHX MODELS0801-0601 Plain $749.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLTR, FLHX MODELS (CONT)0801-0602 Studded, chrome $779.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLTR, FLHX MODELS (CONT)0801-0603 Studded, black $779.95

0801-0601

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLTR, FLHX0801-0604 Plain $669.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLTR, FLHX (CONT)0801-0605 Studded, chrome $689.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLTR, FLHX (CONT)0801-0606 Studded, black $689.95

LOWDOWN™ SEATS WITH DRIVER BACKREST•Sits driver 1.5” lower than the stock seat plus nose of seat is 1.5” narrower than stock

•16.5” W front bucket seat, 14” W rear seat•Seat will fit with a handrail •Contoured backrest pad pivots to match back angle•Backrest post is notched with four easy “snap-in-place” height adjustments positions•Backrest folds completely flat for ease of getting on motorcycle•Backrest can be removed/installed without tools or the need to remove seat•Backrest can be adjusted forward or back up to 2” while rider is seated•When backrest is not in use, receptacle slot is cover by a leather flap held tightly with a hook-and-loop closure •Made in the U.S.A.

0801-0604

0801-0605

0801-0606

FOR DRESSER/TOURING


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

12

SUPER VILLAIN SEAT•Love the looks of the Villain, but need a bit more cush? Look no further

•Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate

•Rider area is 141/2” W; passenger seating area is 11” W•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLHX, FLTR MODELS0801-0612 Smooth seat $529.95

VILLAIN DADDY LONG LEGS SEAT•This bad boy will set you back 2” over the standard Villain, when you need a little more leg room

•Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate

•Rider area is 10” W; passenger seating rea is 71/4” W•Made in the U.S.A.

MAVERICK DADDY LONG LEGS SEAT•Comfortable seat that retains a custom look•Designed for the taller rider who needs more room to move back while still giving the passenger comfort

•Gives the driver an extra 2” of leg room•Special contours give good support while allowing unrestricted movement

•Deep 15” W rider and 133/4” W passenger seating areas•Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate

•Seat bottom carpeted to protect the fender•Made in the U.S.A.


PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHR, FLHX AND FLTR MODELS0801-0608 Smooth seat $419.95

VILLAIN SOLO SEAT•Cutting edge style of the Villain makes for an outrageous solo•There is truly nothing like it on the road•Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate

•Rider area is 10” W•Pillion pad not available•Made in the U.S.A.

MAVERICK SEAT•Comfortable seat that retains a custom look•Special contours give good support while allowing unrestricted movement

•15” of rider comfort and 133/4” of passenger comfort•Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate




FOR DRESSER/TOURING


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

13

MAVERICK SEATS•Comfortable seat that retains a custom look•Special contours give good support while allowing unrestricted movement

•15” W rider area; nearly 11” of passenger comfort•Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate


COBRA FULL-LENGTH SEATS•Classic low-profile smooth style seats•Hug the frame and rear fender•Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate•Seat bottom carpeted to protect the fender•Rider width 10”; passenger width 7”•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 06-10 FXST, 07-11 FLSTF (EXCEPT FXSTD, FXSTSSE)0802-0614 Smooth seat $399.95

PART # DESCRIPTION SUG. RETAILFOR 00-05 FXST AND 00-11 FLST (EXCEPT FXSTD, FLSTN, 07-11 FLSTF, 08-11 FLSTSB)0802-0616 Smooth seat $399.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST AND FLST0802-0615 Smooth seat $399.95

PART # DESCRIPTION SUG. RETAILFOR 06-10 FXST, 07-11 FLSTF (EXCEPT FXSTD, FXSTSSE)0802-0613 Pleated seat $339.95

PART # DESCRIPTION SUG. RETAILFOR 06-10 FXST, 07-11 FLSTF (EXCEPT FXSTD, FXSTSSE) (CONT)0802-0617 Smooth seat $249.95

CHEROKEE CUSTOM SEAT•Smooth black Naugahyde® covers•Sleek design offers excellent driver support and fit•Rider width 11.5”; passenger width 7”•Made in the U.S.A.

LEATHER CROSS BONES™ SEAT•Direct OEM bolt-on seat•100% brown leather with brown stitching•Uses all OEM components and hardware•Lowers seat height or riding position approximately 11/2”•Optional pillion pads and backrest pads sold separately (see page 19 for backrest pads)

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 06-10 FXST, 07-11 FLSTF (EXCEPT FXSTD, FXSTSSE)0802-0612 Smooth seat $329.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLSTSB0802-0607 Brown $329.95PILLION PADS0802-0608 Black 249.950802-0609 Brown 249.95

0802-0614

0802-06130802-0617

0802-0607

0802-0608

0802-0609

FOR SOFTAIL


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

14

FOR DYNA GLIDESOLAR

REFLECTIVE

PART # DESCRIPTION SUG. RETAILFOR 06-11 FXD, FXDWG (29” L X 13” W FRONT X 10” W REAR X 2” H FRONT X 13/4” H REAR)0803-0355 Mild stitch $524.950803-0356 Flame stitch 534.95

PART # DESCRIPTION SUG. RETAILOPTIONAL BACKRESTS0822-0133 EZ GLIDE II backrest, solar-reflective leather,

smooth (9” W x 51/4” H) $179.950822-0154 EZ GLIDE III backrest, solar-reflective leather,

smooth w/ pouch (10” W x 71/2” H) 199.95

0822-0133

0822-0154

0803-0355w/optional backrest 0822-0133

0803-0356

PREDATOR 2-UP SEAT•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Molded polyurethane foam for maximum comfort and styling•3/16” ABS thermoformed seat base for a perfect fit•Eight rubber bumpers and fully carpeted bottom to protect paint•Fits with all Drag and most H-D sissy bars•Includes all mounting hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 06-11 FXD, FXDWG (29” L X 11” W FRONT X 8” REAR X 13/4” H)0803-0350 Smooth $314.95

PART # DESCRIPTION SUG. RETAILFOR 06-11 FXD, FXDWG (29” L X 11” W FRONT X 8” REAR X 13/4” H) (CONT)0803-0351 Mild stitch $314.95

PART # DESCRIPTION SUG. RETAILFOR 06-11 FXD, FXDWG (29” L X 11” W FRONT X 8” REAR X 13/4” H) (CONT)0803-0352 Flame stitch $319.95

0803-0350 0803-0351 0803-0352

PART # DESCRIPTION SUG. RETAILFOR 06-11 FXD, FXDWG0803-0353 Wide pillion, smooth (12” L X 10” W X 2” H) $189.95

PART # DESCRIPTION SUG. RETAILFOR 06-11 FXD, FXDWG (CONT)0803-0354 Wide pillion, flame stitch (12” L X 10” W X 2” H) $199.95

WIDE REAR PILLIONS FOR SOLO SEATS•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Feature EZ slide on-off design for easy install and removal•Will go with Solo Seats PART #s 0806-0340 and 0803-0341•Molded flexible urethane foam for maximum comfort and styling•Carpeted bottom and rubbers to protect paint•3/16” ABS thermoformed seat base for a perfect fit•Made in the U.S.A.

0803-0353 0803-0354

LOW-PROFILE TOURING SEAT WITH DUAL BACKREST CAPABILITY•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Low-profile design with molded flexible urethane foam interior for improved seating position and maximum comfort

•3/16” ABS thermoformed seat base for a perfect fit, and fully carpeted bottom with rubber bumpers to protect paint

•Feature backrest capability for both driver and passenger•Accept EZ Glide™ II or III backrest (sold separately); same backrest can be used in either position•Made in the U.S.A.

Back view

EZ Mounting


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

15

SOLO SEATS•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•EZ mount design utilizes a pin and grommet system so no tools are need to remove the seat

•Covers the two forward holes in the stock FXR fender for a cleaner look

•Lower custom profile with molded polyurethane foam for maximum comfort and styling•3/16” ABS thermoformed seat base for a perfect fit•Rubber bumpers and fully carpeted bottom to protect paint•Includes all mounting hardware


NOTE: Requires a 1/2” hole to be drilled in the fender.

FOR DYNA GLIDE

CHEROKEE SEAT•Pure bobbed and chopped, king/queen style

•Incredible lower back support•Covered in the highest grade black vinyl; double-stitched with bonded polyester thread

•Powder-coated 16-gauge steel base plated is carpeted to provide a friction-free surface between the seat and fender

•Rider seating area is 111/2” W; passenger seating area is 7” W•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 06-11 FXD, FXDWG0803-0362 Smooth seat $329.95

VILLAIN SOLO SEAT•Cutting-edge style of the Villain makes for an outrageous solo

•There is truly nothing else like it on the road

•Covered in the highest grade black vinyl; double-stitched with bonded polyester thread


•Rider area 11” W•Pillion pad not available


PART # DESCRIPTION SUG. RETAILFOR 06-11 FXD, FXDWG0803-0361 Smooth seat $269.95

LEATHER SEATS AND PADS•100% black or brown leather•Lowers seat height or riding position approximately 11/2”•Seats require spring installation kit OEM #54075-10•Optional pillion pads available separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILSEATS0803-0357 Black $329.950803-0358 Brown 329.95

PART # DESCRIPTION SUG. RETAILPILLION PADS0803-0359 Black $249.950803-0360 Brown 249.95

0803-0357

0803-0358

0803-0359

0803-0360

FOR FXR

SOLAR

REFLECTIVE

PART # DESCRIPTION SUG. RETAILFOR 84-94, 99-00 FXR (31” L OVERALL X 101/4” W FRONT X 71/2” W REAR X 13/4” H)0805-0065 Smooth $299.950805-0066 Flame stitch 309.95

PREDATOR 2-UP SEATS•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•New lower profile with molded polyurethane foam for maximum comfort and styling

•3/16” ABS thermoformed seat base for a perfect fit•Rubber bumpers and fully carpeted bottom to protect paint

•Fits with all Drag and most H-D sissy bars•Includes all mounting hardware•Made in the U.S.A.

0805-0065 0805-0066

PART # DESCRIPTION SUG. RETAILFOR 84-94, 99-00 FXR (21” L OVERALL X 11” W FRONT X 11/2” H)0805-0067 Smooth $224.950805-0068 Flame stitch 234.95

0805-0067 0805-0068

FOR 06-11 FXD/FXDWG

EZ Mount system


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

16

FOR XL

PART # DESCRIPTION SUG. RETAILFOR 04-11 XL MODELS0804-0409 Wide pillion, smooth (12” L X 10” W X 2” H) $189.95

PART # DESCRIPTION SUG. RETAILFOR 04-11 XL MODELS (CONT)0804-0410 Wide pillion, flame stitch (12” L X 10” W X 2” H) $194.95

WIDE PILLIONS FOR SOLO SEATS•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Flexible urethane foam for maximum comfort•3/16” ABS thermoformed seat base with carpeted bottom to protect paint•Will fit with front Solo Seats PART #s 0804-0391 or 0804-0392•Lower rider 1/2” from stock seat•Feature EZ slide on-off design for easy install and removal•Made in the U.S.A.

SOLAR

REFLECTIVE

0804-0409 0804-0410

PART # DESCRIPTION SUG. RETAILFOR 04-11 XL (271/4” OVERALL L X 141/2” W FRONT X 121/2” W REAR)0804-0411 Mild stitch $529.950804-0412 Flame stitch 539.95

PART # DESCRIPTION SUG. RETAILOPTIONAL BACKRESTS0822-0133 EZ GLIDE II backrest, solar-reflective leather,

smooth (9” W x 51/4” H) $179.950822-0154 EZ GLIDE III backrest, solar-reflective leather,

smooth w/ pouch (10” W x 71/2” H) 199.95

LOW-PROFILE TOURING SEAT WITH DUAL BACKREST CAPABILITY•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Low-profile design with molded flexible urethane foam interior for improved seating position and maximum comfort

•3/16” ABS thermoformed seat base for a perfect fit, and fully carpeted bottom with rubber bumpers to protect paint•Feature backrest capability for both driver and passenger•Accept EZ Glide™ II or III backrest (sold separately); same backrest can be used in either position•Made in the U.S.A.

0822-0133

0822-0154

0804-0412

0804-0412w/optional backrest 0822-0154

0804-0411 w/optional backrest 0822-0133

Back view

EZ Mounting


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

17

FOR XL

CHEROKEE SEAT•Pure bobbed and chopped King/Queen style•Covered in the highest grade black vinyl; double-stitched with bonded polyester thread


•Rider width is 10.5”; passenger width is 6.5”•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILFOR 10-11 XL1200X0804-0417 Smooth seat $329.95

AVIATOR SEATS•A comfortable solo that won’t overpower your Sporty’s look•Tapered low-profile, heavily contoured bucket design•Covered in the highest grade black vinyl; double-stitched with bonded polyester thread


•Rider area is 121/2” W•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 04-11 XL W/ 4.5 GAL. TANK0804-0416 Smooth seat $279.95FOR 04-11 XL W/ 3.3 GAL. TANK0804-0415 Smooth seat 279.95

0804-0415

BARE BONES SERIES SOLO SEAT•Tapered to the extreme – it gets your feet on the ground•Top-grade black vinyl cover•One-piece molded foam foundation on a powder-coated steel base plate that is carpeted to protect painted surfaces•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 10-11 XL1200X0804-0418 Smooth seat $189.95

PART # DESCRIPTION SUG. RETAILFOR 10-11 XL1200X (CONT)0804-0419 Pleated seat $229.95

0804-04180804-0419

FOR XL

PART # DESCRIPTION SUG. RETAILSEATS0803-0357 Black $329.950803-0358 Brown 329.95

PART # DESCRIPTION SUG. RETAILPILLION PADS0804-0413 Black $249.950804-0414 Brown 249.95

FOR 04-06, 10-11 XL

LEATHER SEATS AND PADS•100% black or brown leather seats for XL models•Lowers seat height or riding position approximately 11/2”•Seats require spring installation kit OEM #54074-10•Optional pillion pads available separately•Made in the U.S.A.

0803-0357

0803-0358

0804-0413

0804-0414


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

EZ GLIDE III™ BACKREST ASSEMBLY•Pad features solar-reflective leather in the contact area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler backrest, higher durability and longer life over conventional leather or vinyl

•Sewn in zipper pouch on rear of pad•Developed to be used in all Drag Specialties seats with EZ Glide II™ applications where a taller pad is desired•Will also work in the passenger position on all Drag Specialties seats with dual-backrest seat applications•Backrest has a single lower detent for positioning in the seat; does not adjust up or down on the bar•Adusts fore-and-aft 2”; pivots and will fold forward•All exposed metal parts feature a polished, nickel-chrome finish•All internal hardware is zinc-plated to prevent rust•14-gauge steel internal base plate•Pad measures 10” W x 71/2” tall•Made in the U.S.A.

18

FOR CUSTOM/RIGIDSOLAR

REFLECTIVE

LARGE LOW SPRING SOLO SEATS•Constructed of high-density closed-cell foam covered with black solar-reflective leather or distressed brown leather

•Solar-reflective leather in the seating area reduces the surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl

•Sixteen-gauge steel pan•Adjustable chrome front seat hinge•Two rear screw studs for springs (springs sold separately, PART #s DS-902011, 0820-0010 and 0820-0029)

•1” x 3/16” welded center bar•Studs are 5/16” x 3/4” L and 7” center-to-center•Measure 151/2” L x 13” W x 3/8” H•Made in the U.S.A.

0806-0055 0806-0056

SEAT RAIN COVERS•Made of durable black 300 x 300 denier polyester fabric with a urethane coating and WRMR (Water-Resistant/Mildew-Resistant) finish

•Cover folds into its own pouch, and pouch is sewn into the rain cover so it is easy to locate

•Features one loop on each side and comes with 4’ of nylon and two barrel locks as adjusters for additional security if needed

•Made in the USA

PART # DESCRIPTION SUG. RETAIL0821-1174 For all Drag Specialties Solo front seats w/ or w/o backrest $24.950821-1175 For all Drag Specialties Predator and Spoon style seats (except 2-up models) 24.950821-1176 For all Drag Specialties 2-up Predator and Solo front seats w/ Solo rear seat combination w/ or w/o backrest 27.950821-1177 For all Drag Specialties Low Profile Touring and Double Bucket seats w/ or w/o backrest 27.95

0821-1177

“THE CONVERTIBLE” BACKREST ASSEMBLY WITH BUILT-IN SEAT RAIN COVER•Complete backrest assembly that has a seat rain cover that pulls out of the pouch on the backside of the pad and covers the entire seat

•Rain cover is secured in the pouch by two snaps and can be removed for cleaning or to use the oversized pouch for additional storage

•Rain-resistant black cover is 300 x 300 denier polyester fabric with a urethane coating and WRMR (water-resistant, mildew-resistant) finish•Easy use: simpy lay backrest forward, unzip pouch, remove rain cover and pull around the perimeter of the seat to secure•Pad features solar-reflective leather on contact area; pouch and pad sides are high-quality automotive-grade vinyl•Backrest assembly can be used in driver or passenger position•All exposed hardware is polished with a show-chrome finish; internal base is 14 gauge steel•Pad measures 10” W x 71/2” tall and adjusts for 2” fore/aft and 2” vertical in three positions

PART # DESCRIPTION SUG. RETAIL0822-0156 For all Drag Specialties seats that accept

EZ Glide I backrest $229.95

PART # DESCRIPTION SUG. RETAIL0822-0157 For all Drag Specialties seats that accept

EZ Glide II backrest $229.95

SOLAR

REFLECTIVE

PART # DESCRIPTION SUG. RETAILCUSTOM APPLICATIONS0806-0055 Black solar-reflective leather w/ perimeter stitched $199.950806-0056 Distressed brown leather w/ perimeter stitched 189.95

DRIVER’S BACKRESTS•Can be adjusted for height and angle to provide maximum comfort•Black vinyl pad assembly folds forward for easy passenger seating•Quick-detach mechanism allows easy removal of hoop and pad assembly•Convenient zip-closure storage pouch on rear•Includes all necessary installation hardware•Pad measures approximately 73/4” W x 51/4” H

PART # DESCRIPTION SUG. RETAIL0822-0150 93-05 FXST, 93-11 FLST (except 00-07 FXSTD, 08-11 FLSTSB, 07-11 FLSTF) $279.950822-0151 06-10 FXST, FXSTB, FXSTC, FXSTS, 07-11 FLSTF, 08-11 FLSTSB 279.95

0822-01500822-0151

Remove from pouch

0822-0157Pull around perimeter of seat to secure

Attach tie-downs to footpegs

PART # DESCRIPTION SUG. RETAIL0822-0154 EZ Glide III™ backrest assembly $199.95

SOLAR

REFLECTIVE

Back view


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 4

19

LEATHER CROSS BONES™ BACKREST PADS•100% black or brown leather backrest pads•Mounts to sissy bar upright #52729-08•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLSTSB0802-0610 Black $235.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLSTSB (CONT)0802-0611 Brown $235.95

FENDER SKINS•Feature automotive-grade vinyl or embossed gator leather centers with leather perimeters and a finished edge

•Felt liner to protect paint•Include black zinc washer and screw to complete installation

•Direct fit; no modifications required (unless noted)•Hugs fender perfectly•Designed to match Drag Specialties solo seats•Will work with most OEM and accessory seats•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 06-11 FXST, 07-11 FLSTF (131/4” L X 51/2” W)1405-0144 W/ smooth automotive-grade vinyl center $34.951405-0145 W/ embossed gator leather center 39.951405-0146 W/ flame stitch automotive-grade vinyl center 39.95FOR 00-05 FXST, 00-11 FLST (131/4” L X 51/2” W)1405-01471 W/ smooth automotive-grade vinyl center 36.951405-01481 W/ embossed gator leather center 42.951405-01491 W/ flame stitch automotive-grade vinyl center 42.95FOR 84-99 FXST, FLST (15” L X 51/2” W)1405-01501 W/ smooth automotive-grade vinyl center 36.951405-01511 W/ embossed gator leather center 42.951405-01521 W/ flame stitch automotive-grade vinyl center 42.95

PART # DESCRIPTION SUG. RETAILFOR 06-11 FXD/FXDWG (15” L X 51/2” W)1405-0135 W/ smooth automotive-grade vinyl center $34.951405-0136 W/ embossed gator leather center 39.951405-0137 W/ flame stitch automotive-grade vinyl center 39.95FOR 97-11 FL, FLHR, FLT, FLTR, FLHX (12” L X 51/2” W)1405-0138 W/ smooth automotive-grade vinyl center 34.951405-0139 W/ embossed gator leather center 39.951405-0140 W/ flame stitch automotive-grade vinyl center 39.95FOR 04-11 XL (EXCEPT 48) (10” L X 51/2” W)1405-0141 W/ smooth automotive-grade vinyl center 26.951405-0142 W/ embossed gator leather center 34.951405-0143 W/ flame stitch automotive-grade vinyl center 34.951 Not direct-fit, 5/16” punch included for forward-mount hole.

SIX-SHOOTER SEAT MOUNT KNOB•Polished stainless steel construction•Stud and knob are one piece and will not separate

•Knob measures 11/16” diameter x 9/16” tall x 11/16” stud length

•Includes step washer and anti-friction flat washer to cover all bracket applications

•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0820-0035 For 96-11 H-D models

w/ 1/4”-20 fender nut $16.950820-0036 For 95 and earlier H-D models

w/ 1/4”-28 fender nut 16.95

FOLD-DOWN LUGGAGE RACK•Folds down from the sissy bar to create extra storage space when you need it

•Hinges up against the back rest when not in use for a clean look

•For use with OEM stock or “low” sissy bars with H-D rigid or detachable side plates on models listed

•Measures 111/2” L x 81/2” – 51/2” W (tapered)

NOTE: Not for use with Küryakyn Sissy Bar side plates or Küryakyn Raptor Sissy Bar.

PART # DESCRIPTION SUG. RETAIL1501-0389 For 84-05 FXST (except FXSTD), 06-11 FLST

(except 07-11 FLSTFSE, 07-11 FLSTF, 08-11 FLSTSB); 06-11 FXD (except 08-11 FXDF, 09 FXDFSE), 04-11 XL $159.95

0802-0610

1405-0135 1405-0136 1405-0137

1405-0141

1405-0142 1405-0143

1405-0138

1405-0139 1405-0140

0802-0611


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 5

NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See Hardware, Chemicals & Tools for products that will help to prevent or remove blueing.

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

20

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in the FatBook.

SOFTAIL DUALS•Give your Softail the nostalgic look of true duals

•21/8” 220° full coverage head pipe heat shields and 21/2” slip-on heat shields make the system virtually blue-proof

•The Slip-ons give the performance and sound you would expect with standard louver core baffles

•Feature matched straight-cut billet tips•Optional quiet baffles and tips are also available; see 2011 FatBook™


NOTE: Pre-07 applications will require O2 sensor port plug kit PART #1861-0464

PRO PIPE CHROME COMPETITION BAFFLE•Optional competition baffle for Vance & Hines Pro Pipe Chrome systems

•Deliver a deep, aggressive tone, increasing the sound level 3-5dB


PART # DESCRIPTION SUG. RETAIL1861-0709 Opt. competition

baffle (ea.) $94.95

DELUXE SLIP-ON MUFFLERS•Designed exclusively for the Harley-Davidson Tri Glide Ultra Classic and Street Glide Trikes

•Slip-on mufflers yield significant improvements in both performance and ground clearance over the stock slip-on mufflers

•Finished with a classy oval-shaped, stainless steel rolled-end treatment, mufflers are tuned for a deep and mellow exhaust note that’s perfect for listening to the stereo while cruising the interstate.

PART # DESCRIPTION SUG. RETAIL1801-0498 For 09-11 H-D FL Trike models $579.95

OPTIONAL QUIET INSERT•Reduces the exhaust tone to a neighborhood-friendly level


PART # DESCRIPTION SUG. RETAIL1861-0700 For Twin Slash Ovals

41/2” mufflers PART #1801-0391 $39.95

PART # DESCRIPTION SUG. RETAIL1800-1304 For 97-11 FXST/FLST models (except FXCW/FXCWC/FXSTSSE) $699.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 5



21

We recommend installing a DYNOJET POWER COMMANDER with any exhaust change on fuel-injected models. See POWER COMMANDER pages in the FatBook.

PART # DESCRIPTION SUG. RETAIL1800-13111 For 97-11 FXST/FLST

(except 09 FSXTSSE) $799.951 Pre 07 models will require O

2 sensor port plug kit PART #1861-0464

(sold separately).

FISHTAIL DUALS•True dual system with 15/8” headpipes wrapped in 21/4” heatshields that flow into extra-long 21/8” mufflers under full coverage 21/2” heatshields

•Show-quality chrome finish•Feature classic fishtail tips for a stylish lowrider-style Softail•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1800-13141 For 86-11 FXST/FLST models

(except 09 FXSTSSE) $499.951800-1313 For 06-11 Dyna models 499.951800-13121 For 04-11 XL models 499.951 Pre 07 models will require O

2 sensor port plug kit PART #1861-0464

(sold separately).

PYTHON® THROWBACKS•13/4” dual-wall headpipes flow into 21/8” muffler bodies to create an aggressive throaty sound

•System arrives completely wrapped and ready to ride with gray exhaust wrap and stainless steel zip ties pre-installed

•Feature 21/2” straight-cut billet end accents that showcase the Python logo


PART # DESCRIPTIONSUG.

RETAIL1861-0665 Repl. baffle

for PART #s 1800-0494/1800-0089 $44.95

2-INTO-1 EXHAUST SYSTEM BAFFLE•Replacement baffle for Python 2-into-1 systems


PART # DESCRIPTION SUG. RETAIL1801-0523 For 95-11 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models (except 10 FLHX/FLTRX) $547.95

BLACK MAMBA 3” SLIP-ON MUFFLERS•21/2” muffler bodies are clad in 3” black ceramic heat shields and are finished with chromed billet tips and laser-cut Python custom name badges with heavy-gauge rivets

•Black Mambas produce a nice deep rumble sound with optional competition and quiet baffles available separately, see 11 FatBook


1800-1312

Left side

Right side


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 5



22


PART # DESCRIPTION SUG. RETAIL1801-0522 For 09-11 FLHT, FLHX, FLHR, FLTR and H-D FL

Trike models (except 10 FLHX/FLTRX) (pr.) $499.951801-05251 For 95-08 FLT, FLHT, FLHX, FLHR, FLTR models 499.951 Requires the use of Python True Duals or Vance and Hines Dresser Duals

to ensure proper alignment and fitment.

FISHTAIL 21/2” SLIP-ON MUFFLERS•Feature 21/8” muffler bodies wrapped in 21/2” chrome heatshields which match the OEM headpipe heatshields

•Show-quality finish and style•Come standard with louvered core baffles or optional quiet baffles, sold separately (see 11 FatBook)

•Match perfectly with Python True Dual headers or Vance & Hines Dresser Dual Headers for an ultimate system


PART # DESCRIPTION SUG. RETAILFOR 91-11 FXD, FXDWG W/ MID OR FORWARD CONTROL1800-1305 Chrome w/ black billet end cap and

contrasting machined flutes $659.951800-1306 Black w/ black billet end cap and

contrasting machined flutes 689.95

ROAD RAGE II MEGA POWER SYSTEMS•Designed specifically to address the needs of tuned motors built for high horsepower applications

•Features 2-into-1 equal-length 13/4”-17/8” stepped headpipes•Megaphone muffler housing with 4” polished or black billet end cap with contrasting machined flutes

•Include full-coverage heat shields•Oxygen sensor ports and plugs (12mm and 18mm)•Short megaphone style•Include removeable baffle

PART # DESCRIPTION SUG. RETAILFOR 91-11 FXD, FXDWG W/ MID OR FORWARD CONTROL1800-1302 Chrome w/ black billet end cap and chrome heat shields $679.951800-1303 Black ceramic w/ black billet end cap and black ceramic heat shields 699.95FOR 07-11 VRSCAW, VRSCDX, VRSCX, 09-11 VRSCF1800-1315 Chrome w/ black billet end cap w/ machined contrasting and chrome heat shields 699.951800-1316 Black w/ black billet end cap w/ machined contrasting and black heat shields 739.95

ROAD RAGE II B1 POWER SYSTEMS•Designed specifically to address the needs of tuned motors built for high horsepower applications

•Uses a unique extended inner collector maximizing performance

•Features 2-into-1 equal-length stepped headpipes; systems for Dyna feature 2-step headers, 13/4” to 13/8”; systems for V-Rod feature 3-step headers, 13/4” to 17/8” to 2”

•Straight-style performance muffler body with 21/2” x 161/2” baffle and billet end cap with contrasting machined flutes•Include full-coverage heat shields•Oxygen sensor port plugs also included for non-sensor applications

1801-0522

1800-1305

1800-1302

1800-1303

1800-1316


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 5



23


PART # DESCRIPTION SUG. RETAILFOR 86-11 FXST/FLST (EXCEPT 09 FXSTSSE)1800-12991 Chrome, short meg w/ heat shields $649.951800-13001 Black, short meg w/ heat shields 679.95FOR 91-11 FXD, FXDWG W/ MID OR FORWARD CONTROL1800-13071 Chrome, short meg w/ heat shields 729.951800-13081 Black, short meg w/ heat shields 759.95FOR 07-11 V-ROD MODELS1800-1298 Black, long meg w/ heat shields 719.951800-1318 Black, short w/ heat shields 739.951800-1317 Chrome, long meg w/ heat shields 699.95OPTIONAL/REPLACEMENT BAFFLES AND END CAPS1860-0541 2” i.d. quiet baffle for PART #s 1800-0655, 1800-0657, 1800-0656, 1800-0658, 1800-1237, 1800-1238 79.951860-0543 21/2” i.d. performance baffle for PART #s 1800-0660, 1800-0650, 1800-1013, 1800-1287, 1861-0381 79.951860-0532 Opt. black end cap w/ contrasting machined flutes for all Bassani long meg mufflers PART #s 1800-0655, 1800-0656,

1800-0659, 1800-0660, 1800-1010, 1800-1087, 1800-1151, 1800-1160, 1800-1164, 1800-1168, 1800-1172, 1800-1248, 1800-1249, 1801-0184, 1801-0185, 1802-0119, 1810-2002, 1810-2003, 1861-0381 99.95

1 Includes O2 sensor bung plugs for non-sensor applications.

ROAD RAGE 2-INTO-1 SYSTEMS•Stepped headers merge into a true reverse-cone megaphone muffler•13/4” headpipe steps up to 17/8” into the collector to increase flow and improve performance•4” muffler body with polished billet end cap•Removable spiral-core louvered baffle included•Include mounting hardware•Available in long (24”) and short (12”) muffler lengths with chrome or black finish•Heat shields included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1800-1310 For 04-11 XL $699.951800-1309 For 86-03 XL 699.95

RADIAL SWEEPERS•Performance stepped headers (13/4” - 2”) with radial rear section

•Fabricated from 16-gauge double-wall steel•Direct bolt-on design for easy installation•Available with black finish•04-11 models include oxygen sensor ports and plugs•Include full-coverage chrome heat shield with holes•Made in the U.S.A.

NOTE: Will not fit with passenger footpegs.

1800-1310

1800-1299

1800-1307

1800-1298

1800-1300

1860-0532

1860-05431860-0541


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 5



3” FIREPOWER SERIES SLIP-ON MUFFLERS•Straight-cut slip-on mufflers feature 16-gauge steel construction with polished chrome finish and grooved black billet end caps

•Improves power and performance •2” baffles•Sold in pairs•Made in the U.S.A.

24


PART # DESCRIPTION SUG. RETAIL1800-1301 For 95-11 FLT, FLHT, FLHR,

FLHX, FLTR $999.95

+P BAGGER STEPPED TRUE-DUAL SYSTEM WITH POWER CURVE•Features equal length 13/4” into 17/8” step headpipes with 4” megaphone mufflers

•12mm and 18mm oxygen sensor ports and plugs•Includes full-coverage headpipe•Produce a distinctive “stereo-friendly sound”•Chrome finish with black powder-coat end caps•Made in the U.S.A.

NOTE: 10 FLHX/FLTRX models will require PART #1861-0573 to properly mount.

PART # DESCRIPTION SUG. RETAILFOR 95-11 FLT, FLHT, FLHX, FLTR, FLHR MODELS1801-0514 Megaphone, chrome w/ 21/4”

standard baffles $549.951801-0515 Megaphone, chrome w/ 21/2”

performance baffles 549.951801-0510 Inverted billet insert, chrome

w/ 2” standard baffle 499.95

PART # DESCRIPTION SUG. RETAILFOR 09-11 VRSCF MODELS1801-0516 Straight cut, black $579.951801-0517 Straight cut, chrome 550.95REPLACEMENT BAFFLES1860-0542 Repl. 21/2” performance baffles for

PART # 1801-0185 (pr.) 129.95

4” SLIP-ON MUFFLERS•4” diameter slip-on mufflers feature 16-gauge steel construction and removable flow-through baffles with show-chrome or black finish

•Mufflers feature black billet end caps and contrasting flutes•Bolt to stock locations with supplied hardware•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1860-0543 Repl. baffle

for megaphone mufflers PART #s 1801-0420, 1801-0421 $79.95

REPLACEMENT BAFFLE FOR MEGAPHONE SLIP-ON MUFFLERS•21/2” dia. x 211/2” L•Includes a 9” louvered section•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1801-0499 For 07-11 FXST, FXSTB, FXSTC, FLSTC, 08-11 FXCW, FXCWC $359.95

1801-0514

1801-0510

1801-0516

1860-0542

1801-0517


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 5



25


STOUT SLIP-ON MUFFLERS•Massive 4” non-tunable chrome body•Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled

•Newly-designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes

•Provide a heavy, broad spread power curve with modest horsepower and torque gains over stock mufflers

•Minimally (2dB) louder than stock•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1801-0518 For 10-11 FLHT/FLHR/FLHX/FLTR

(except 10 FLHX/FLTRX) $678.951801-0519 For 95-09 FLT/FLHT/FLHR/FLHX/FLTR 678.95

PART # DESCRIPTION SUG. RETAIL1801-0521 For 10-11 FLHT/FLHR/FLHX/FLTR

(except 10 FLHX/FLTRX) $648.951801-0520 For 95-09 FLT/FLHT/FLHR/FLHX/FLTR 648.95

STOUT SLIP-ON MUFFLERS•Massive 4” non-tunable chrome bodies•Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled

•Newly-designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes

•Provide a bold, strong power curve from mid-range on up with a significant horsepower and torque gain over stock mufflers

•Classic deep and heavy Kerker rumble is 5dB over stock•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1802-0122 For 09-11 FLHT, FLHX, FLTR, FLHR $499.95

2-INTO-2 DUAL HEADER SYSTEM•Reduces heat transmission to the rider and passenger by routing the exhaust under the frame instead of under the seat

•Lighter system that offers more flow and makes more top-end power than the factory system

•Features 13/4” 16-gauge mandrel bent, interconnected headers and 220° full-coverage heat shields

•Front pipe crosses over to the left side and is securely mounted to the transmission oil pan

•Crossover pipe is formed from 17/8” tubing for increased ground clearance and no cross-sectional area loss

•Hidden inter-connect for maximum top-end horsepower, improved low-end torque and sound dampening

•Includes 12mm and 18mm O2 sensor ports and plugs and all

mounting hardware•Header systems accept any 95-11 OEM-style dresser mufflers (sold separately)

•Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL1801-0524 For 07-11 FXST/FLST models (except FXSTD/

FLSTF/FLSTN/FLSTSC/FLSTSB) $299.95

3” HP-PLUS® SLANT-CUT SLIP-ON MUFFLERS•Patented steel construction baffle now features more high-temperature fiberglass packing, provides significant gains in horsepower and torque and exhibits a distinctive, throaty sound

•Use all factory mounting hardware•OEM heat shields may be retained•Sold in pairs•Made in the U.S.A.•U.S. patent 5,173,576

NOTE: ECM units on fuel-injected models need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly.

NOTE: These mufflers are designed for use on close-course competition motorcycles only and do not conform to U.S. EPA noise emission standards.

1801-05191801-0521

1801-05211801-0519


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 5



4” SLIP-ON MUFFLERS WITH SCALLOP TIP•Increase horsepower and torque with a deeper, more aggressive exhaust note

•Welded from mild steel then bathed in a four-step chrome-plating process

•4” diameter, elliptically machined and chromed billet tips cap off these 4” round muffler bodies

•These slip-on mufflers are a simple solution for a touch of custom look without a custom price or effort

•Propriety technology to prevent bluing, making these slip-on mufflers virtually blue proof


26

We recommend installing a Fi2000R FUEL PROCESSOR with any exhaust change on fuel-injected models. See Fi2000R pages in FatBook.

PART # DESCRIPTION SUG. RETAIL1801-0497 For 95-11 FLHT/FLHR/FLHX/FLTR models

(except 10 FLHX/FLTRX) $489.95

PART # DESCRIPTION SUG. RETAIL1801-0455 For 10 FLHX/FLTRX $269.95

TRI-OVAL MUFFLER•Produces an awesome, thundering bass rumble, yet is quiet enough to pass the Sunday morning sound test

•Chrome Tri-Oval design, with a full-size, aluminum V-tip with dual exhaust ports

•The round front seamlessly morphs to Tri-oval shape at the rear

•The V-tip is what will really get you noticed•Increases performance gains over the stock, with a bump up especially in the low and mid-range

•Mounts to the stock head pipe, making installation a breeze


PART # DESCRIPTION SUG. RETAIL1801-0454 For 10 FLHX/FLTRX models $239.95

4” SLIP-ON MUFFLER•Increase horsepower and torque with a deeper, more aggressive exhaust note

•Beveled and machined chrome billet tip on the single muffler body•Welded from mild steel then bathed in a four-step chrome-plating process

•Uses a cooling chamber with propriety technology to prevent bluing•To ensure problem-free installation, all mounting hardware and instructions are included


PART # DESCRIPTION SUG. RETAIL1802-0131 For 09-11 FLHT, FLHR, FLHX, FLTR models $524.95

POWER TRUE DUAL HEADERS•Independent dual system with hidden cross-over•Full chrome heat shield with 220° coverage•Compatible with 09-11 style slip-on Dresser mufflers•Has 12mm and 18mm sensor ports and plugs•Made in the U.S.A.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 5



27


APEX EXHAUST SYSTEM•Aggressive sound and look for closed course use only•Saves significant weight over stock system; improves even more the power-to-weight ratio•Complete system allows simple access to clutch and other areas under race conditions without dropping the engine out•Titanium/carbon-fiber system with titanium end caps•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1800-1297 For 09-11 XR1200 $1,999.95

PART # DESCRIPTION SUG. RETAILFOR RINEHART 3.5 MUFFLERS1802-0135 Clean Cut, Contrast Cut™ $99.951802-0136 Clean Cut, chrome 99.951802-0137 Slash, Contrast Cut™ 99.951802-0138 Slash, chrome 99.951802-0139 Sweep, Contrast Cut™ 99.951802-0140 Sweep, chrome 99.951802-0141 Tech 10, Contrast Cut™ 99.951802-0142 Tech 10, chrome 99.95FOR RINEHART 4” MUFFLERS1802-0143 Clean Cut, Contrast Cut™ 99.951802-0144 Clean Cut, chrome 99.951802-0145 Slash, Contrast Cut™ 99.951802-0146 Slash, chrome 99.951802-0147 Sweep, Contrast Cut™ 99.951802-0148 Sweep, chrome 99.951802-0149 Tech 10, Contrast Cut™ 99.951802-0150 Tech 10, chrome 99.95FOR SCREAMIN’ EAGLE 3.5” MUFFLERS1802-0151 Clean Cut, Contrast Cut™ 99.951802-0152 Clean Cut, chrome 99.951802-0153 Slash, Contrast Cut™ 99.951802-0154 Slash, chrome 99.951802-0155 Sweep, Contrast Cut™ 99.951802-0156 Sweep, chrome 99.951802-0157 Tech 10, Contrast Cut™ 99.951802-0158 Tech 10, chrome 99.95

PART # DESCRIPTION SUG. RETAILFOR SCREAMIN’ EAGLE 4” MUFFLERS1802-0159 Clean Cut, Contrast Cut™ $99.951802-0160 Clean Cut, chrome 99.951802-0161 Slash, Contrast Cut™ 99.951802-0162 Slash, chrome 99.951802-0163 Sweep, Contrast Cut™ 99.951802-0164 Sweep, chrome 99.951802-0165 Tech 10, Contrast Cut™ 99.951802-0166 Tech 10, chrome 99.95FOR BASSANI SHORT MEGAPHONE (1/2” INTERNAL LIP)1802-0167 Clean Cut, Contrast Cut™ 99.951802-0168 Clean Cut, chrome 99.951802-0169 Slash, Contrast Cut™ 99.951802-0170 Slash, chrome 99.951802-0171 Sweep, Contrast Cut™ 99.951802-0172 Sweep, chrome 99.951802-0173 Tech 10, Contrast Cut™ 99.951802-0174 Tech 10, chrome 99.95FOR BASSANI LONG MEGAPHONE (1” INTERNAL LIP)1802-0175 Clean Cut, Contrast Cut™ 99.951802-0176 Clean Cut, chrome 99.951802-0177 Slash, Contrast Cut™ 99.951802-0178 Slash, chrome 99.951802-0179 Sweep, Contrast Cut™ 99.951802-0180 Sweep, chrome 99.951802-0181 Tech 10, Contrast Cut™ 99.951802-0182 Tech 10, chrome 99.95

ELITE EXHAUST END CAPS•CNC machined billet aluminum construction •Available in chrome and Contrast Cut™•Contrast Cut™ starts with a polished end cap that has been black anodized then re-cut to open up the design•Available in four designs and six applications •Sold each•Made in the U.S.A.

Clean CutChrome

Clean CutContrast Cut™

Slash Contrast Cut™

SlashChrome

SweepContrast Cut™

SweepChrome

Tech 10Contrast Cut™

Tech 10Chrome


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 5



28


STAINLESS STEEL CABLE TIES•Great for high-temperature areas

•Ball bearing and barb fastening assembly•Locks tightly and will not slip•Secure any place an extra strength tie is needed

•Come in 8” or 14” lengths•Sold in pack of five•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1861-0671 8” $9.951861-0670 14” 11.95

STAINLESS STEEL WORM CLAMPS•Feature a narrow design with a low profile head•Secures exhaust heat wraps or can be used any place extra clamping is needed in extreme temps or conditions

•Come in two sizes•Sold in packs of four•Made in the U.S.A.

EXHAUST HEAT WRAP KITS•Fiberglass cloth for extreme heat insulation (2,000°)

•Perfect for wrapping pipes or mufflers•Keeps the heat inside•Come in 1” or 2” wide x 25’ rolls•Includes four 14” locking stainless steel ties; replacement ties sold separately (PART #1861-0670)•Available in black or tan•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1861-0672 1.25”-2.25” diameter $13.951861-0673 2.25”-3.25” diameter 13.95

PART # DESCRIPTION SUG. RETAIL1861-0666 1” tan $31.951861-0667 1” black 31.951861-0668 2” tan 44.951861-0669 2” black 44.95

MUFFLER PACKING•Heavy-duty 1,200°F muffler packing

•11” x 16” x 1” thick•Can be split in half to allow for double use


WELD-IN O2 SENSOR BUNGS•Use to install O2 sensors in exhaust systems•Machined at a 45-degree angle•Available in 12 x 1.25mm or 18 x 1.5mm sizes•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1861-0696 Muffler packing $14.95

PART # DESCRIPTION SUG. RETAIL1861-0694 18 x 1.5mm $24.951861-0695 12 x 1.25mm 24.95

1861-0671

1861-0670

1861-06721861-0673

1861-0666

1861-0667

1861-0668

1861-0694

1861-0669


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 6

29

PRECISION™ ENGINE MANAGEMENT SYSTEM•Not like any other “self-tuning” controller, Revolution Performance’s Precision EMS™ is a true self-optimizing system; adjusts almost instantly with little additional adjustment

•Simply set it up and ride; no laptop, no dyno and no downloads

•Delivers instant results instead of “a little better with each ride”; while most systems require the system to “learn” more than two thousand fuel cells over a tremendous number of rides, the Precision EMS factors in air/fuel ratio, timing parameters, load and temperature ranges then adjusts to them instantly

•Will benefit everyone; from the owner of a stock bike to a full-blown 135”

•Takes full advantage of, and retains, the stock Delphi ECU•Maintains OEM safeguards and features, like ion-sensing knock protection

•Only system with engine-load-based timing control•Utilizes wide band O

2 sensors to constantly monitor and adjust

•Includes Precision EMS controller, two wide-band O2 sensors, ECU

shipment box and customer information sheet•Requires the use of a stock 08-10 FLHT ECU•Requires 18mm sensor bungs in the exhaust system for proper installation


NOTE: ECU will be calibrated by Revolution Performance. Pre-paid, next-day-air package included.

NOTE: Not legal for operation on public highways in the state of California.


PART # DESCRIPTION SUG. RETAIL1020-1526 For 11 FLHT, FLHR, FLTR, FLHX $799.95

PART # DESCRIPTION SUG. RETAIL1020-1491 For 08-11 XR1200/1200X $359.95

EFI POWER PROGRAMMER•Get riding quickly with this fuel-management unit and select the mode that suits your style

•Plugs into existing wiring using the stock connectors•Unlike most other fuel-injection programmers, this one is load-sensitive

•No laptop or software required

NOTE: Professional installation is recommended.

PART # DESCRIPTION SUG. RETAILOXYGEN SENSOR ELIMINATOR KITS1020-1395 For 06-11 models (except 10-11 FLHR/FLHT/FLHX/FLTR

and H-D FL Trikes) $24.951020-1478 For 10-11 FLHR/FLHT/FLHX/FLTR and H-D FL Trikes 34.95ACTIVE INTAKE AND EXHAUST ELIMINATOR KIT1020-1479 For late-model European spec models

w/ active intake and exhaust 29.95

OXYGEN SENSOR ELIMINATOR KITS AND ACTIVE INTAKE AND EXHAUST ELIMINATOR KIT•Oxygen Sensor Eliminator Kits allow air/fuel ratio changes for racing applications•Active Intake and Exhaust Eliminator Kit is used to avoid setting a diagnostic trouble code when installing some aftermarket air filters and exhaust that require the removal of original equipment active systems; for off-road racing use only

NOTE: Not legal for sale or use on pollution-controlled vehicles.

1020-1395

1020-1478

1020-1479

PART # DESCRIPTION SUG. RETAIL1020-1525 All 08-11 H-D Throttle By Wire (TBW) models $219.95

THROTTLEPAK™ THROTTLE MANAGEMENT SYSTEM•Brings back the quick throttle response lost in throttle by wire (TBW)•One twist of the throttle and riders will notice the improved response and acceleration

•Works on any bike’s configuration; stock, modified and any exhaust combination

•Possibly the easiest performance mod ever; installs in minutes, simply plug into factory connectors


PART # DESCRIPTION SUG. RETAIL1020-1521 For 11 FLHT, FLHR, FLHX, FLTR models $279.95

FUELPAK LCD•Throttle position sensor-based system simplifies the process of fuel-injection tuning

•Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button

•Increases power and improves throttle response•Very user friendly; plugs into the existing harness on the bike•No computer or software is required, simply punch in the values supplied with the Fuelpak

•Values supplied are for use with Vance & Hines exhaust systems•Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information)

•Includes all necessary mounting hardware•Original version which is not legal for sale in CA

NOTE: Not legal for sale or use on pollution-controlled vehicles.

NOTE: Requires the use of a high-performance air filter.


RETAIL1020-1493 For all H-D models with Delphi ECM (except 11 Softails)$549.95

POWER VISION•The quickest and most powerful flash tuner on the market

•The sophisticated, yet easy-to-use, 3.5” full-color touch-screen display mounts to handlebars with integrated Amps 4-hole threaded inserts; also mounts to most mounts that feature Amps 4-mounting options, see page 1333 of the 2011 FatBook

•The display’s interface cable plugs directly to the bike’s diagnostic connector

•NO COMPUTER REQUIRED; simply select the tune and follow the on-screen prompts to flash the bike; tunes can also be edited directly from the Power Vision

•Utilizes WinPV (Windows PC-based tuning application)•Stores up to six different tunes that can be flashed to the bike•Downloads and stores the stock calibration in case OEM restoration is needed; stock calibration can also be saved as an editable copy and used as a starting point

•Dynojet preconfigured tunes are preloaded on the unit; Power Vision will identify the bike’s information and automatically sort hundred of applicable, dyno-proven tunes

•Custom tunes can be loaded by a tuning shop or received via email and loaded onto the device

•Displays all J1850 H-D vehicle data, wide-band air fuel ratio2 and various calculated channels (including MPG instant and trip MPG)

•AutoTune Basic and Pro3 calculates and stores fuel trims to optimize fuel curve

•Checks and clears diagnostic codes•Features adaptive trims and idle offset (with bike running)

NOTE: The Power Vision “marries” to one individual ECM and may be used only on that bike for flashing the ECM. For this reason LeMans Corporation/Drag Specialties does not take back Power Visions for any reason, used or not. All returns and or adjustments must be made directly with Dynojet Research. The Power Vision may be used on any bike to read and clean trouble codes.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 6

30

PART # DESCRIPTION SUG. RETAIL0657-0026 Polished nautical star $35.950657-0027 Brass nautical star 52.95

ENRICHENER KNOBS FOR S&S CARBS•Replaces enrichener lever on S&S carbs•Perfect for custom applications•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 93-06 BIG TWIN W/ 40MM CV CARB AND 01-11 BIG TWIN W/ DELPHI EFI (EXCEPT 08-11 DRESSER)1012-0142 Chrome $188.951012-0143 Black 188.951012-0144 Wrinkle black 188.95FOR 93-06 BIG TWIN W/ S&S E OR G CARB1012-01451 Chrome 188.951012-01461 Black 188.95

PART # DESCRIPTION SUG. RETAILFOR 93-06 BIG TWIN W/ S&S E OR G CARB (CONT)1012-01471 Wrinkle black $188.95FOR 93-06 BIG TWIN W/ MIKUNI 42/45/48 CARB1012-0148 Chrome 198.951012-0149 Black 198.951012-0150 Wrinkle black 198.951 Not for 100” S&S motors.

CARB SUPPORT BRACKET/BREATHER KITS•Billet aluminum construction with a chrome, black or wrinkle-black finish•Crankcase breathes back into the carb or throttle body so no external lines are necessary•Allow custom air cleaners or velocity stacks to be installed in a horizontal or vertical position; no other adapters are required•Include installation hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 93-06 BIG TWIN W/ CV CARB AND 01-11 TWIN CAM W/ DELPHI EFI (EXCEPT 08-11 TOURING)1010-0984 Contrast Cut $499.951010-0985 Chrome 499.95FOR 93-06 BIG TWIN MODELS W/ S&S E OR G CARB1010-0990 Contrast Cut 499.951010-0991 Chrome 499.95FOR 08-11 TOURING AND H-D FL TRIKE1010-0986 Contrast Cut 499.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 TOURING AND H-D FL TRIKE (CONT)1010-0987 Chrome $499.95FOR 91-11 XL1010-0988 Contrast Cut 499.951010-0989 Chrome 499.95REPLACEMENT COMPONENTS1011-2485 Rain sock 33.951011-2486 Repl. air filter 64.95

FAST AIR INTAKE SOLUTION•The most innovative and aggressive-looking forward-facing air intake on the market

•Features an internal crank case breather system •K&N Filter element allows for a significant horsepower increase over stock air cleaner

•Available in chrome or Contrast Cut™ finishes •Includes rain sock •Made in the USA

1010-0984

0657-0026

0657-0027

1012-0143

1012-01451012-0148

1010-0985

1011-2485

PART # DESCRIPTION SUG. RETAIL1050-0241 Quickshot for S&S Super E & G carburetors $99.95

QUICKSHOT•Cost-effective, bolt-on upgrade that allows accelerator pump fuel spray to be adjusted simply with the turn of a screw

•Patent-pending design•Accelerator pump check valve stops bogging and coughing•Adjustable fuel jet to control accelerator pump spray•Precision single hole sprayer tip directs and injects the fuel more efficiently than stock•A fine high-speed stream of fuel atomizes faster to improve roll-on acceleration•Instant throttle response•Improves low end performance and fuel economy•Easy bolt-on; no modifications necessary


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 6

31

BLACK OPS TURBINE AIR CLEANERS•New Black Ops finish features a machined surface treated through a proprietary military spec process for strength and hardness, then further machined and anodized for a subtle yet striking black-on-black contrast that is scratch, weather and damage resistant; it’s the ultimate low-maintenance finish

•Exposed filter design offers enhanced airflow•Backing plate promotes smooth airflow into carb/throttle body•Built-in internal crankcase breathers•High-volume K&N air filter•Laser-engraved center nose cone•All mounting hardware included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1010-0962 For 93-06 Big Twin models w/ stock CV carb,

01-11 Softail models, 04-11 Dyna Glide models, 02-07 FLT models w/ Delphi EFI $419.95

PART # DESCRIPTION SUG. RETAIL1010-0965 For 93-06 Big Twin models w/ S&S E or G carb $419.951010-0963 For 08-11 FLT models 419.951010-0964 For 91-11 XL W/ CV carb/Delphi EFI 419.95

VENTURI AIR CLEANER FACEPLATES•Allows customer to change any existing RSD Venturi air cleaner faceplate to a new design•Contrast Cut™ finish starts with a polished venturi air cleaner faceplate that has been black anodized then re-cut to open up the design

•Black Ops finish features a machined surface treated through a proprietary military spec process for strength and hardness, then further machined and anodized for a subtle yet striking black-on-black constrast that is scratch, weather and damage resistant; it’s the ultimate low-maintenance finish

•Specifically designed to match RSD wheels•Fit RSD Venturi air cleaners only•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1014-0100 Turbine, Contrast Cut™ $149.951014-0099 Turbine, black 149.951014-0101 Turbine, chrome 149.95

PART # DESCRIPTION SUG. RETAIL1014-0102 Turbine, Black Ops $149.951014-0095 Boss, black 149.951014-0096 Boss, Contrast Cut™ 149.95

PART # DESCRIPTION SUG. RETAIL1014-0097 Slam, black $149.951014-0098 Slam, Contrast Cut™ 149.95

Boss Contrast Cut™

Slam black

SlamContrast Cut™

Turbine Chrome shown mounted on air cleaner

PART # DESCRIPTION SUG. RETAIL1010-1001 For 08-11 FLHT, FLHR, FLTR, FLHX and

H-D FL Trikes $239.95

SKULL AIR CLEANER KIT•Extremely rigid, high-strength composite construction

•Includes chrome outer cover, backing plate, high-flow air filter element and all necessary brackets, crankcase breathers and other required hardware included

•Sold each

PART # DESCRIPTION SUG. RETAIL1010-1004 For 08-11 FLHT/FLHR/FLTR/FLHX and

H-D FL Trikes $329.95

PRO R HYPERCHARGER™•The best-flowing Hypercharger™ ever produced

•Careful redesign of all interior shapes increases airflow

•Additional air scoop on outer cover directs air onto the high-flow, washable and reusable air filter

•Unrestricted air under high-load riding situations from huge front butterflies are vacuum operated

•Include all necessary mounting hardware and crankcase breather kit

1010-0963


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 6

32

PART # DESCRIPTION SUG. RETAIL1010-1003 W/ chrome butterflies for 08-11 FLHR,

FLHT, FLHX, FLTR and H-D FL Trikes $289.95

PRO SERIES HYPERCHARGER™•Features a 50% larger air filter for massive airflow

•Internal shape has been modified to allow increased airflow and velocity

•One-piece construction, ball-milled, “speed lines” symmetrical butterflies and new “Pro” embossed bearing cups

•Edges of Pro Series Hypercharger are radiused for a more streamlined appearance

PART # DESCRIPTION SUG. RETAIL1010-1002 W/ chrome butterflies for 08-11 FLHR,

FLHT, FLHX, FLTR and H-D FL Trikes $259.95

HYPERCHARGER™ AIR CLEANER WITH BLOOD GROOVE TRAP DOOR•These air cleaners look great and work even better•Chrome-plated body and trapdoor with chrome butterflies•Include Küryakyn’s breather where applicable

PART # DESCRIPTION SUG. RETAIL1010-1006 Black Blood Groove

trap door $24.95

BLOOD GROOVE TRAP DOOR•Available in black•A great accessory for any standard Hypercharger™ (except Pro R, Pro Series Hypercharger)

•Sold each

PART # DESCRIPTION SUG. RETAILWITH CHROME ELBOW1010-0992 Black filter $262.951010-0995 Black filter with stainless steel wire 267.95WITH GLOSS BLACK ELBOW1010-0993 Black filter 262.951010-0996 Black filter with stainless steel wire 267.95WITH WRINKLE BLACK ELBOW1010-0994 Black filter 262.951010-0997 Black filter with stainless steel wire 267.95

FLOMASTER AIR CLEANER KITS•Deliver massive airflow for peak performance at an economical price

•Lifetime filter is produced using the latest materials for maximum filtration and powerful airflow

•Filter is black media with a stainless steel end cap; also available with stainless steel wire

•Elbow is available with chrome, gloss black or wrinkle black finish

•Kits include elbow, filter, clamp, rain guard, pre-filter and mounting hardware

•Requires the use of a support bracket/breather kit (sold separately)


FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-11 DELPHI EFI


RETAIL1011-2289 Repl. air filter

for PART #1010-0819 or PART #1010-0556 $52.95

REPLACEMENT FILTER FOR AIRCHARGER PERFORMANCE INTAKE KIT•Replacement air filter features a polished end cap


1010-0992

1010-0993

1010-0994


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 6

33

“BILLET SUCKER” AIR CLEANER ASSEMBLIES•Available in Stage I and Stage II•Both feature an oversize exposed filter design for tremendous airflow

•Breather passages exit at the mouth of the carb/throttle body, creating a virtually closed-loop system

•Kits include a high-flow air filter, outer cover, backing plate/support bracket and all necessary hardware

BIG SUCKER™ PERFORMANCE AIR FILTER KITS•Features a one-piece aluminum backing plate/carb support bracket

•Eliminates the need for banjo fittings, hoses and filter

•Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system

•Stage I kit includes a high-flow filter and accepts OEM outer cover

•Stage II kit includes a 20% larger high-flow filter and accepts an 8” round Ness or 8” round OEM outer cover (sold separately)

•All necessary hardware and instructions are included with each kit

BIG SUCKER™ STAGE II AIR FILTER KITS WITH COVER•Features a one-piece aluminum backing plate/support bracket



•Kit includes a 20% larger high-flow filter and steel outer cover

•Pre-oiled filters available in two styles: standard or stainless-steel jacketed

•All necessary hardware and instructions are included with each kit


PART # DESCRIPTION SUG. RETAILFOR 93-99 EVOLUTION BIG TWIN MODELS W/ CV CARB1010-0430 Kits w/ standard filter (chrome) $169.951010-0625 Kits w/ stainless-steel jacketed filter (chrome) 189.951010-0626 Kits w/ stainless-steel jacketed filter (black) 189.95

PART # DESCRIPTION SUG. RETAILSTAGE I KIT1010-0615 Scalloped (black/raw) $214.95STAGE II KITSDS-288885 Smooth (chrome) 219.951010-0066 Scalloped (chrome) 219.95

PART # DESCRIPTION SUG. RETAILSTAGE II KITS1010-0623 Scalloped (black/raw) $224.95DS-288884 Grooved (chrome) 219.951010-0619 Retro (chrome) 224.95

FOR ALL 93-99 EVOLUTION BIG TWIN MODELS W/ CV CARB

1010-00661010-0615

1010-0619

1010-1014

1010-0430 1010-0625 1010-0626

1010-0623

DS-288884

DS-288880

DS-288885

PART # DESCRIPTION SUG. RETAILSTAGE I KITS1010-1013 For 08-11 FXD/FXDWG (natural) $139.951010-1012 For 08-11 FXD/FXDWG (chrome) 159.951010-1011 For 08-11 FXD/FXDWG (black) 159.95DS-288880 For 93-99 Evolution Big Twin models w/ CV carb (natural) 129.951010-10141 For 91-11 XL models (natural) 139.95STAGE II KITSDS-288881 For 93-99 Evolution Big Twin models w/ CV carb (natural) 139.951 Will fit 88-90 models also, breather system is not applicable for these model years.

DS-288881


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 6

34

BIG SUCKER™ STAGE I AIR FILTER KIT WITH COVER•Features a one-piece aluminum backing plate/support bracket



•Kit includes high-flow filter and steel outer cover•Pre-oiled filters available in two styles: standard or stainless-steel jacketed•All necessary hardware and instructions are included with each kit•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILKITS WITH STANDARD FILTER1010-0871 Chrome $159.951010-0876 Black 159.95

PART # DESCRIPTION SUG. RETAILKITS WITH STAINLESS-STEEL JACKETED FILTER1010-0881 Chrome $179.951010-0886 Black 179.95

FOR 93-99 EVOLUTION BIG TWIN MODELS W/ CV CARB

1010-0871 1010-0881 1010-0886

BIG SUCKER DERBY COVER AIR FILTER KITS•Unique air filter kits feature a 5-hole mounting system which allows Twin Cam derby covers (not included) to be bolted on as the outer cover

•Pre-oiled filters available in two styles: standard or stainless-steel jacketed•All kits include patented Ness hidden breather Big Sucker backing plates in either chrome or powder-coated black wrinkle finish

PART # DESCRIPTION SUG. RETAILKITS W/ STANDARD PRE-OILED FILTER1010-0632 Chrome $159.951010-0634 Black 159.95KITS W/ STAINLESS-STEEL JACKETED PRE-OILED FILTER1010-0628 Chrome 179.951010-0630 Black 179.95

FOR ALL 93-99 EVOLUTION BIG TWIN MODELS W/ CV CARBBILLET SUCKER AND BIG SUCKER HARDWARE KITS•Kits contain all required hardware for all Ness Billet Sucker and Big Sucker air filter kits

PART # DESCRIPTION SUG. RETAILFOR 93-99 EVOLUTION BIG TWIN MODELS W/ CV CARB1010-0584 Stage I hardware kit $34.951010-0592 Stage II hardware kit 35.95

HIGH-PERFORMANCE DIAMOND AIR CLEANER ASSEMBLY•Super-clean design features all CNC-machined billet aluminum construction throughout•Equipped with a genuine K&N 4” diameter high-flow filter•Has Joker’s exclusive “baffle plate” crankcase breathing system held all together with high-strength 12-point alloy mounting bolts

•Improves leg clearance over the stock air cleaner assembly due to its compact design•Finned design with a chrome-plated finish•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL1010-1009 For 01-11 Twin Cam models w/ Delphi EFI

(except 08-11 FLHT/FLHR/FLHX/FLTR and HD FL Trike) $299.95

1010-0584

1010-0628

Shown withNess-TechDerby Cover


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 6

35

HIGH-PERFORMANCE AIR CLEANER ASSEMBLIES•Super-clean design features all-CNC-machined billet aluminum construction throughout

•Equipped with a genuine K&N 4” diameter high-flow filter

•Has Joker’s exclusive “baffle plate” crankcase breathing system, held all together with high-strength 12-point alloy mounting bolts

•Improves leg clearance over the stock air cleaner assembly due to its compact design

•Available in your choice of hard black anodized or chrome-plated finishes


PART # DESCRIPTION SUG. RETAILFOR 99-06 TWIN CAM W/ CV CARB AND 01-11 TWIN CAM W/ DELPHI EFI (EXCEPT 08-11 FLHT/FLHR/FLHX/FLTR AND HD FL TRIKE)1010-1007 Joker Racing, black anodized $289.951010-1008 Joker Racing, chrome 299.95

PART # DESCRIPTION SUG. RETAILFOR 99-06 TWIN CAM W/ CV CARB AND 01-11 TWIN CAM W/ DELPHI EFI (EXCEPT 08-11 FLHT/FLHR/FLHX/FLTR AND HD FL TRIKE) (CONT)1010-1010 JM U.S.A., black anodized $289.95

PART # DESCRIPTION SUG. RETAILTUNED INDUCTION AIR CLEANERS1010-0563 Aluminum (burnished) $236.951010-0564 Wrinkle powder coat 247.951010-0565 Chrome 257.95CHROME BRACKET KITS1013-0075 For 86-03 XL w/ Super E/G series carb 257.951013-0074 For 91-11 XL w/ stock CV carb & EFI 257.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT COMPONENTS1011-0897 Repl. red filter w/ clamp (ea.) $50.951011-0898 Opt. blue filter w/ clamp (ea.) 50.951011-1336 Moisture repellent rain cover for

S&S tuned induction filters (pr.) 38.95

TUNED INDUCTION AIR CLEANERS AND BRACKETS•Swept forward, 2-into-1 design rams additional air into the cylinder•Natural supercharging effect increases mid-range torque•Nearly twice the filter area of a teardrop air cleaner•Air cleaners are available in several different finishes•Chrome bracket kits feature a support bracket and breather system all in one•Air cleaner and bracket kits must be purchased separately•Made in the U.S.A.


RETAIL1011-0323 For S&S Super E and G carbs $49.951011-2286 Repl. high-flow filter for S&S Super

E and G carbs (also fits S&S air cleaners for stock carbs and EFI throttle bodies) 21.95

HIGH-FLOW AIR FILTER AND ADAPTER KIT•High-flow filter designed especially for Super E and G carburetors

•Filter is 1” taller than standard filter and features a low-restriction, pre-oiled filter element

•Allows for a 37% increase in airflow•Filter and adapters extend the teardrop housing out 1” for better exposure and a high-performance street racer look

•Kit installs in minutes; no permanent modifications required


NOTE: Not for use with S&S Super B or Super D carburetors, or Super E and G Kits for Buells.

PART # DESCRIPTION SUG. RETAIL1014-0110 For 99-11 Twin Cam w/ stock oval air cleaner cover $29.95

STOP-N-POP BOTTLE OPENER•Add a visual kick to your air cleaner or custom location of your choice

•Aluminum base construction with stainless steel bottle opener

•Base is ball-furnished finish, bottle opener is polished finish•Installs using original air cleaner center mount bolt; mounting hardware for bottle opener included

•Mounts in just minutes, adding both functionality and bling•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1011-2359 For 08-11 XR1200/1200X; repl. OEM #29377-08 $69.95

REPLACEMENT HIGH-FLOW AIR FILTER•Washable and reusable; accordion design provides high airflow with excellent filtration

•Ideal for extended use in dirty and dusty riding conditions•Original K&N High-Flow Technology•American-made for over 35 years

1010-0563

1010-0564

1010-0565

1013-0075

1013-0074

1011-0897 1011-0898

1011-1336

1010-1007

1010-1008

1010-1010

1011-0323


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 7

36

RIGHT SIDE CRANKCASE RACE•Sold each•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL0924-0211 For 84-99 Big Twin (except Twin Cam); std. repl. OEM #24599-58B/93 $61.95

124” HOT SET-UP KIT FOR USE WITH STOCK OR S&S CYLINDER HEADS•The S&S Hot Set Up kit for Twin Cams allows a Twin Cam owner to convert a stock 88” engine to 124” using the stock crankcases

•Include 41/8” bore cylinders and forged dished pistons, an S&S 45/8” stroke flywheel assembly, a set of S&S .640” lift chain-drive Easy Start cams, tappets, S&S Quickee Adjust pushrods, roller rocker arms, and all hardware, gaskets and instructions

•10.4:1 compression ratio with stock cylinder heads; 10.2:1 compression ratio with S&S 89cc heads (PART #s 0930-0006 or 0930-0068, sold separately)

•Fuel system is not included and must be ordered separately (see 2011 FatBook)


NOTE: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications.

PART # DESCRIPTION SUG. RETAILFOR 99-06 TWIN CAM 88A (EXCEPT 06 DYNA)0903-0812 Black powder-coat $3,595.95

PART # DESCRIPTION SUG. RETAILFOR 99-06 TWIN CAM 88A (EXCEPT 06 DYNA) (CONT)0903-0813 Silver powder-coat $3,595.95

PART # DESCRIPTION SUG. RETAILFOR 92-99 EVOLUTION-STYLE BIG TWINS0920-0063 Standard bore case $1,236.950920-0064 Big bore case 1,236.95

SUPER STOCK™ ENGINE CASES•Cast from A356 T-6 heat-treated aluminum alloy

•Cases are available for 31/2” stock and 35/8” big bore applications with strokes up to and including 5” and accept stock flywheel assemblies

•Machined to accept a 92-99 Evolution oil filter assembly that mounts on the front of stock motor cases

•All races are line-honed and breather cavity is precision-machined to optimize breather timing for maximum oil scavenging

•Additional parts include crankcase bolts, washers and nuts, cylinder mounting studs, timing hole plug, magnetic drain plug, assorted breather and oil line fittings, oil pressure switch, oil screen, spring and plug, sprocket shaft Timken® bearing assembly and oil seal, pinion shaft main bearing race, cam needle bearing assembly, oil pump drive shaft bushing and installation instructions

•Machined for EFI applications•Black powder-coat finish•Made in the U.S.A.

0920-0063

0903-0812


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 7

37

MONSTER BIG BORE KITS•Revolution™ aerospace-grade all-aluminum cylinders with nickel-silicon-carbide electroplated bores which means NO SLEEVING; allows larger bore sizes and less friction for more horsepower, lower temps and a longer lifespan

•Monster power in a package that’s tested, reliable and, most importantly, really big•Includes Wiseco forged pistons with rings (that are specifically designed for optimal compatibility with Revolution Performance’s cylinders), wrist pins, circlips and high-performance head and base gaskets

•Available in three finishes: natural silver, black or granite (matches the engines of Screamin’ Eagle models)•Made in the U.S.A.

NOTE: All kits require case-boring.

MOTOR BORE SIZE STD. +.010” +.020” +.030” SUG. RETAILPISTON KITS89” stroker kits (forged flat top) 31/2” 0910-1936 0910-1937 0910-1938 0910-1939 $278.9597” cylinder kits (forged) 3.927” - 0910-2141 - - 339.95106” cylinder kits (forged) 3.927” - 0910-2142 - - 339.95

DESCRIPTION +.010” SUG. RETAILREPLACEMENT RING SET FOR S&S PISTONS ONLYFor 97/106” cylinder kits (3.927” bore) 0912-0358 $39.95

REPLACEMENT PISTONS AND RINGS FOR S&S MOTORS•Piston kits include pistons, rings, wrist pins and clips•Replacement rings come as sets for two pistons•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL117” KITS FOR 07-11 TWIN CAM (4.125” BORE CYLINDERS; 4.375” STROKE; 10.5:1 FLAT-TOP PISTONS)0903-0831 Black $1,099.950903-0832 Silver 1,099.950903-0833 Granite 1,099.95

PART # DESCRIPTION SUG. RETAIL131” KITS FOR 99-11 TWIN CAM (REQUIRES 45/8” STROKER FLYWHEEL KIT) (4.250 BORE CYLINDERS; 4.625” STROKE; 10.5:1 FLAT-TOP PISTONS)0903-08341 Black $1,099.950903-08351 Silver 1,099.951 Requires use of big bore carb or throttle body.

PART # DESCRIPTION SUG. RETAIL0926-1439 For 84-04 Big Twin $62.95

VALVE SPRING LOWER COLLARS•Provides .050” more spring travel than stock•Stronger and lighter than stock•Use stock keepers•Sold as set of four•Made in the U.S.A.

0903-0831

0910-2141

0912-0358

0903-0835


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 7

38

REAPER® CONVERSION CAMSHAFTS FOR 99-06 TWIN CAM (EXCEPT 06 DYNA GLIDE)•Produce more power and torque increasing cranking compression, improving throttle response, acceleration and fuel mileage

•Utilize 99-06 inner cam journals with 07-11 outer cam journals and chain sprockets allowing use of 07-11 camplates, oil pump and hydraulic chain tensioners and chain system (parts not included, must be purchased separately)

•Dyno proven and track tested•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0925-0608 630 cams $329.95

GRIND VALVE LIFT OPEN CLOSE DURATION @ .053” LIFT @ TDC LOBE CENTERLINE525Intake 525 4° 42° 226° .099” 109°Exhaust 535 51° 5° 236° .112” 113°574Intake 574 15° 45° 240° .163” 105°Exhaust 574 61° 14° 255° .143” 113.5°630Intake 630 20° 58° 258° .188” 109°Exhaust 630 64° 19° 263° .171” 112.5°

0925-0606

630 CAMS•Vicious power gains, wide streetable power band from high lift profile camshaft for high-performance engines with highly modified cylinder heads and compression ratio

•Carburetor and or throttle body work required along with a performance exhaust and intake system

•Maintains low end performance with eye blurring mid- and top-end power

•High-performance valve springs, pushrods and lifters required

•2500-6900+ rpm power range

574 CAMS•Wicked power band for modified engines and an excellent bolt in for stock 96” engines; a great all-around camshaft with solid low end performance and mind blowing mid- and top-end power

•Extremely smooth valve train motion•Works best with modified cylinder heads, increased compression ratio, performance exhaust and intake systems

•Performance valve springs required on 99-04 engines and performance pushrods and lifters recommended

•2000-6800 rpm power range

525 CAMS•Designed to increase torque band width and increase fuel economy

•Great bolt-in camshaft upgrade for stock 88” and 96” engines; also performs well in 103” stroker engines

•Produces strong low- and mid-range power with linear horsepower and torque curve

•Can be used with factory valve springs, pushrods and lifters

•Increases throttle response and eases starting

•Responds well to cylinder head work•1750-5800 rpm power range



GEAR-DRIVEN CAMSAndrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are utilized. Furthermore, the power in Harley’s Twin Cam engine can be made even more convincing when superior Andrews computer-designed high-performance cams are installed.


NOTE: All Andrews gear-driven cams require four-gear set for installation (PART # DS-199532 or DS-199538).

NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

12G GRIND CAMS•Similar timing to earlier stock 88” cams but gear driven•Smooth power throughout the entire RPM range (1000 to 5400 RPM)

•No engine tuning needed•Uses stock springs


RETAIL0925-0601 For all 99-06 Twin Cam (except 06 Dyna) $321.95

CHAIN DRIVEN CAMSAndrews Products grinds its cams using a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high-performance cams are installed. Made in the U.S.A.


PART # DESCRIPTION SUG. RETAIL0925-0597 For all 07-11 Twin Cam and 06 Dyna Glide $287.95

PART # DESCRIPTION SUG. RETAIL0925-0598 For all 07-11 Twin Cam and 06 Dyna Glide $287.95

TW48 GRIND CAMS•Broad tip cams for baggers with stock motors; max torque at low and mid rpm ranges

•Use stock springs

TW9 GRIND CAMS•Bolt-in cam with more power through the entire rpm range (1000-5400 rpm)•Use stock springs

GRIND OPEN CLOSE DURATION @ .053 DURATION @ .020 VALVE LIFT LIFT TDCTW9Intake -02° 28° 206° 242° .492 .075Exhaust 40° -08° 216° 252° .486 .075TW48Intake 13° 29° 222° 257° .548 .153Exhaust 43° 15° 238° 273° .548 .163

GRIND OPEN CLOSEDURATION @ .053

DURATION @ .020

VALVELIFT

LIFTTDC

Intake 02° 34° 216° 252° .489 .091Exhaust 40° 02° 222° 259° .489 .095


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 7

39

EASY START CAM KITS•Start any engine regardless of displacement or compression ratio with a stock starter

•Save your starter and battery; tested for 10,000 starts without running battery down

•Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance

•Available in chain drive and gear drive versions•All chain-drive cams include installation kit•All gear-drive cams include 4-gear set and installation kit

PART # DESCRIPTION SUG. RETAILFOR 07-11 BIG TWIN, 06 DYNA0925-0443 Chain-drive $344.950925-0448 Gear-drive 794.95FOR 99-06 BIG TWIN (EXCEPT 06 DYNA)0925-0521 Chain-drive 354.950925-0453 Gear-drive 794.95

PART # DESCRIPTION SUG. RETAILFOR 07-11 BIG TWIN, 06 DYNA0925-0444 Chain-drive $344.950925-0449 Gear-drive 794.95FOR 99-06 TWIN CAM (EXCEPT 06 DYNA)0925-0522 Chain-drive 354.950925-0520 Gear-drive 794.95


PART # DESCRIPTION SUG. RETAILFOR ALL 07-11 BIG TWIN AND 06 DYNA0925-0447 Chain-drive $344.950925-0452 Gear-drive 794.95FOR 99-06 TWIN CAM (EXCEPT 06 DYNA)0925-0525 Chain-drive 354.950925-0538 Gear-drive 795.95 GRIND OPEN CLOSE DURATION @ .053 VALVE LIFT

S&S 551Intake 15° 20° 215° .550”Exhaust 39° 18° 237° .550”S&S 570Intake 20° 40° 240° .570”Exhaust 55° 20° 250° .570”S&S 583Intake 8° 15° 204° .583”Exhaust 60° 22° 262° .583”S&S 585Intake 20° 45° 245° .585”Exhaust 60° 20° 260° .585”S&S 625Intake 20° 55° 255° .625”Exhaust 60° 20° 260° .625”


0925-0443

0925-0453

625 EZ CAMS•For 95/96/103/110 cubic-inch engines•Compression ratios from 10:1 to 10.75:1•High lift springs required

585 EZ CAMS•Optimized for Dyna 95” to 106” with slip-on mufflers, high-flow air filter and 9.0 to 10.5:1 compression

•Great results from 3000-6000 rpm•High lift springs required

583 EZ CAMS•Optimized for use as a great overall cam for Softail and Dyna, but can be used in any Big Twin

•Provides strong low-end torque and horsepower that you can really feel•Strongest from 1500-5000 rpm in a Softail and Dyna application•High lift springs required

570 EZ CAMS•For 88/95/96/103 cubic-inch engines•Compression ratios below 10:1•High lift springs required

551 EZ CAMS•Optimized for 88/96” to 106” Touring bikes with slip-on mufflers and 9.0 to 10.0:1 compression

•Best bolt-in cam available for Dressers •Can be used with stock pushrods, springs and lifters•Pulls hard from idle to 4000 rpm


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 7

40

GRIND OPEN CLOSE DURATION @ .053 VALVE LIFTSTOCK CARBURETORS/INJECTEDIntake 02° 38° 216° .473”Exhaust 36° 04° 220° .473”S&S 509GIntake 18° 18° 216° .509”Exhaust 46° 11° 237° .509”

GEAR-DRIVE CAM KIT•Camshaft gear drive kit increases valve timing accuracy by eliminating timing chain lash and loosely fit stock chain drive

•Reverses the rear cam’s direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit

•Kit include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions

•Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams

•A hydraulic press and other professional-level tools are required to install these kits

•S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used

•Cam bearings and gaskets must be replaced when installing new cams



NOTE: Due to the inherent characteristics of gear drives, you may experience more valve train noise.

509G GRIND CAMS•Bolt-in cams for 88” engines with stock compression ration•Great low and midrange torque•180 psi cranking compression; no need for compression releases

PART # DESCRIPTION SUG. RETAIL0925-0539 For 99-06 Twin Cam

(except 06 Dyna) $303.95 VALVE GRIND OPEN CLOSE DURATION @ .053 VALVE LIFTSTOCK CARBURETORS/INJECTEDIntake 02° 38° 216° .473”Exhaust 36° 04° 220° .473”S&S 509CIntake 18° 18° 216° .509”Exhaust 46° 11° 237° .509”

CHAIN-DRIVE CAM KIT•For use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used



509 GRIND CAMS•Bolt-in touring cams for 88” engines with stock compression ration

•Great low and midrange torque•180 psi cranking compression; no need for compression releases

PART # DESCRIPTION SUG. RETAIL0925-0540 For 99-06 Twin Cam (except 06 Dyna Glide) $767.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 7

41

PART # DESCRIPTION SUG. RETAILTWO-GEAR SET, INNER0925-0599 For 06 Dyna Glide and all 07-11 Twin Cam motors $192.950925-0600 For 99-06 Twin Cam motors (except 06 Dyna Glide) 192.95PINION GEARS0925-0602 Undersize outer gear for two-gear seT, PART #DS-199539;

for 06 Dyna Glide and all 07-11 Twin Cam motors 89.950925-0603 Oversize outer gear for two-gear set, PART #DS-199539;

for 06 Dyna Glide and all 07-11 Twin Cam motors 89.950925-0604 Undersize inner gear for two-gear set, PART #0925-0600;

for 99-06 Twin Cam motors except 06 Dyna Glide 104.950925-0605 Oversize inner gear for two-gear set, PART #0925-0600;

for 99-06 Twin Cam motors except 06 Dyna Glide 104.95

GEAR SETS FOR GEAR-DRIVEN CAMS•Sets will work with all Andrews and S&S gear-driven cams for Twin Cam motors•Two gear inner sets are supplied with drive key•Made in the U.S.A.

PART # DESCRIPTIONWITH .105 PINS

WITH .108 PINS

SUG. RETAIL

0925-0577 Undersize gear; orange 2.7324 - 2.7334 2.7455 - 2.7465 $34.95

0925-0581 Oversize gear; black 2.7384 - 2.7395 2.7495 - 2.7505 34.95

CAM DRIVE GEARS FOR 84-99 EVOLUTION BIG TWIN•High-quality heat-treated gears•Available in oversize and undersize•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0934-2121 For use w/ all S&S rocker boxes $12.95

ROCKER BOX FLAT WASHERS•Silicone-coated•1/4” x 7/16” x .020”•Sold in 12-pack

PART # DESCRIPTION SUG. RETAILFOR 01-11 TWIN CAM MODELS0940-1022 RawCut black $74.950940-1023 Chrome 100.95

CAM COVER HEAT SINK INSERTS•6061 aluminum construction•Uses outside air to reduce cam chest temperatures up to 10 °F


PART # DESCRIPTION SUG. RETAILFOR 99-11 TWIN CAM0940-1024 Flame $38.950940-1025 Hot Head 38.950940-1026 Joker 38.950940-1027 Lucky 7 38.95

PART # DESCRIPTION SUG. RETAILFOR 99-11 TWIN CAM (CONT)0940-1028 Money to Burn $38.950940-1029 Rock and Roll 38.950940-1030 Smooth 38.95

POINTS COVERS•Available in a variety of designs•CNC-machined to a high finish then polished and hard black anodized and engraved with Joker’s signature logos

•Include mounting screws•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 99-11 TWIN CAM0940-1032 Chrome $99.950940-1031 Black 99.95

NESS-TECH® HOLE SHOT POINTS COVERS•Machined from 6061 T-6 billet aluminum; available in polished show-chrome or black

•Includes chrome-plated hardware•Sold each

0925-06020925-0577

0940-1022

0940-1023

0940-1024 0940-1025 0940-1026

0940-1027

0940-1028

0940-1029

0940-1031

0940-1032

0940-1030

0925-0599


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 8

42

PART # OEM # DESCRIPTION SUG. RETAIL (EA.)FOR 84-86 BIG TWIN1106-0057 35039-85 Mainshaft, belt drive, L84-86 $173.95

MAINSHAFT FOR 4-SPEED BIG TWIN•Sold each•Made in the U.S.A.

PART # OEM # DESCRIPTION SUG. RETAIL (EA.)FOR 91-11 XL1106-0068 35640-89 Mainshaft, 91-05 $190.951106-0064 - 1st gear set, 2.61 close ratio

(2-pc.), 91-95 167.951106-0062 35772-89 3rd gear mainshaft, 91-95 79.951106-0063 35773-89 4th gear mainshaft, 91-95 79.95

MAINSHAFT AND GEARS FOR 5-SPEED XL•Sold each•Made in the U.S.A.

NOTE: For complete gear sets see 2011 FatBook.

PART # OEM # DESCRIPTION SUG. RETAIL (EA.)FOR 91-11 XL1106-0067 35641-89 Countershaft, 91-05 $92.951106-0062 35772-89 2nd gear countershaft, 91-95 79.951106-0065 35775-89 4th gear countershaft, 91-95 44.951106-0066 35633-89 5th gear countershaft, 91-95 44.95

COUNTERSHAFT AND GEARS FOR 5-SPEED XL•Sold each•Made in the U.S.A.


PART # DESCRIPTION SUG. RETAIL1203-0012 For 06-11 FXD, 07-11 FLH/FLHT/FXST $77.95

MEGA NUT FOR CRUISE DRIVE™•Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut


1106-00621106-0063

1106-0064

1106-0068

1106-0066

1106-0062

1106-0067

1106-0065

PART # DESCRIPTION SUG. RETAIL1120-0271 For 07-08 FLHT/FLHR/FLTR/FLHX $139.951120-0272 For 06-11 Dyna w/ mid controls 139.95

DELUXE CHROME INNER PRIMARY COVER ACCENT•High-quality, chrome-plated, die-cast•Precise fit and finished edges enhance the primary area•Four mounting points for secure, quiet operation

NOTE: Not for use with rear suspension lowering kits unless specified.

PART # DESCRIPTION SUG. RETAILFOR 04-11 XL1107-0226 Maltese cross $163.951107-0225 Nautical star 163.95

DERBY COVERS•Black billet aluminum derby covers with a raised Maltese Cross or Nautical Star design


PART # DESCRIPTION SUG. RETAILFOR 99-11 BIG TWIN MODELS (5-HOLE)1107-0228 Chrome $149.951107-0227 Black 149.95

NESS-TECH® HOLE SHOT DERBY COVERS•Machined from 6061 T-6 billet aluminum; available in show-chrome or black finish

•Chrome hardware included•Sold each

NOTE: 06 Dyna Glide and all 07-11 applications will require the use of gasket PART #s 0934-0289 or 0934-0788; see 2011 Drag Specialties FatBook.

PART # OEM # DESCRIPTION SUG. RETAIL (EA.)FOR 84-06 BIG TWIN (EXCEPT 06 DYNA GLIDE)1106-0060 35025-79 1st gear, mainshaft, 84-06 $74.951106-0059 35622-79A 1st gear, countershaft, 84-06 74.95

MAINSHAFT AND COUNTERSHAFT GEARS FOR 5-SPEED BIG TWIN•Sold individually•Made in the U.S.A.


1107-02261107-0225

1106-0060 1106-0059

1120-0271

1120-0272

1107-0227 1107-0228


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 8

43

BRUTE IV 2” OPEN BELT DRIVE•2” wide, 8mm system•Features a stylish, one-piece aluminum motor plate•Allows you to retain the floorboards in the stock position without having to cut, weld or move existing brackets

•Has a built-in provision for a heel-toe shifter shaft•Kit includes the starter extension components, billet jackshaft support cover, all necessary hardware and installation instructions

•Matte black finish•Made in the U.S.A.


RETAIL1120-0274 For 07-11 FLHT, FLHR, FLHX, FLTR and H-D FL Trike $2,807.95

CARBON FIBER CLUTCH PLATE KIT•Carbon fiber plates have high static and dynamic coefficient of friction for smooth, positive engagement and release

•Steel plates are manufactured under strict quality-control standards•Kit includes eight friction plates and seven steel plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1131-2181 For 09-11 XR1200/1200X $181.95

CLUTCH SPRING CONVERSION KIT•Converts your diaphragm spring clutch system to six coil springs•CNC-machined billet pressure plate•Ideal for stock to high-performance motors•Allows for more precise adjustment and smoother operation

•Increases the holding capacity of the clutch•Includes two sets of coil springs to provide three different pressure options

•Utilizes the stock clutch hub, shell and clutch plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1601-0281 For 09-11 VRSCF V-Rod Muscle $866.95

ALL ELECTRIC EASY SHIFT™ KIT•For speed, comfort and fun•Electronically suspends the ignition system, allowing the transmission to smoothly shift up or down with just the push of a button

•Shift up at partial or full throttle and back down at the touch of a button•There is no need to use the foot shifter and the clutch is used only when starting or stopping

•Works for normal street riding or full-throttle shifting•Also a perfect match for male and female riders who own bikes that require a lot of hand strength to pull in the clutch lever

•OEM shifting ability is retained after installation•Includes a dual-button handlebar control, a shift cylinder plated with a lustrous chrome finish, bolt-on shift cylinder support bracket and a state-of-the-art control module that sends a quick signal from the handlebar control to the shift cylinder

•Also included is the electronic ignition kill module and step-by-step instructions with photos for easy installation


PART # DESCRIPTION SUG. RETAIL1131-2051 For 98-11 Big Twin w/ hydraulic clutch $209.95

PART # DESCRIPTION SUG. RETAIL1120-0276 For 08-11 FXCW/C $2,799.951120-0275 For 07-11 FXST, FLST 2,758.951120-0273 For 90-06 FXST, FLST 2,212.95

BRUTE IV 8MM X 75MM (3”) EXTREME™ BELT DRIVE SYSTEMS•Feature a one-piece motor plate, entirely designed for bolt-on component pieces

•Front and rear pulleys have bolt-on polished stainless flanges

•Outer guard is 3/8” thick billet aluminum•Starter nose assembly conceals the jackshaft components•Include front and rear pulleys, motor plate assembly, 3” belt, clutch hub, pack and outer guard, and a redesigned Pro Clutch™ assembly for maximum torque transference

•Matte black finish•Made in the U.S.A.

1120-0275


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 8

44

SHIFT LINKAGES•Stylish additions that really stand out•Linkages are chrome steel with chrome-plated ABS accents

•Measures 121/8” long•Sold each

PART # DESCRIPTION SUG. RETAILFOR 86-11 FXST/FLST (EXCEPT 97-99 FLSTS), 93-02 FXDWG, 84-11 FLT/FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKES1601-0292 Flame $109.951601-0293 Zombie 109.951601-0294 Widow 109.95

SHIFTER RODS•CNC-machined from 6061 T-6 billet aluminum•Features a specially designed spherical bearing pressed in for a clean look

•Measures 12” L center to center


RETAILFOR 84-11 FLT/FLHT/FLHR/FLTR1601-0296 Deep Cut Flat, chrome $129.951601-0295 Deep Cut Flat, black 129.951601-0298 Deep Cut Round, chrome 129.95


RETAILFOR 84-11 FLT/FLHT/FLHR/FLTR (CONT)1601-0297 Deep Cut Round, black $129.951601-0300 Engraved, chrome 129.951601-0299 Engraved, black 129.95


RETAILFOR 84-11 FLT/FLHT/FLHR/FLTR (CONT)1601-0302 Hole Shot, chrome $129.951601-0301 Hole Shot, black 129.95

CHROME SHIFTER SHAFT•Chrome-plated steel shifter shaft•Exact replacement for stock; replaces OEM #33789-02


RETAIL1601-0282 For 03-05 FXD, FXDL models $19.95

SHIFT PEG EXTENDER•Wide gas tanks create a problem especially for short-inseam riders; this shift peg extender is just what is needed

•Extends the shift peg out 1.5”•Manufactured from billet stainless steel and highly polished


PART # DESCRIPTION SUG. RETAIL1603-0146 For all 84-11 models $42.95

HEEL SHIFT LEVER ELIMINATOR•Eliminates the heel (rear) shift lever allowing for more room on the floorboard

•Made of billet aluminum and polished•Easy to install•Made in the U.S.A.


RETAIL1602-0480 For 86-11 FLST models $32.95

BELT DRIVE TRANSMISSION PULLEY•Machined from heat-treated, gear-quality steel•Made in the U.S.A.

NOTE: May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment.

PART # DESCRIPTION SUG. RETAILFOR ALL 07-11 SIX-SPEED BELT DRIVE MODELS AND 06 DYNA GLIDE1201-0584 31-tooth “Good Acceleration” $137.951201-0587 32-tooth Stock replacement 137.95FOR 94-06 BIG TWIN FIVE-SPEED BELT DRIVE MODELS (EXCEPT 06 DYNA GLIDE)1201-0583 31-tooth “Good Acceleration” 137.951201-0586 32-tooth Stock replacement 137.951201-0589 33-tooth “Overdrive” 137.95

1601-0292

1601-02931601-0294

1601-0296 1601-0295

1601-0298

1601-0297

1601-0300

1601-0299

1601-0302

1201-0588

1601-0301

PART # DESCRIPTION SUG. RETAILFOR 85-93 BIG TWIN FIVE-SPEED BELT DRIVE MODELS1201-0582 31-tooth “Good Acceleration” $147.951201-0585 32-tooth Stock replacement 147.951201-0588 33-tooth “Overdrive” 147.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

45

8.8MM SPARK PLUG WIRE SET•Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance

•Rated at SAE Class E J2031 with a continuous operating temperature of 450° F


PART # DESCRIPTION SUG. RETAIL2104-0227 For 09-11 FLHT, FLHR, FLHX, FLTR and

FL Trike models $19.95

IGNITION WIRE KIT•Retro 7mm ignition wire kit•Fully insulated suppression core wires•24” L universal design•Includes plug terminals and boots•Sold in pairs•Made in the U.S.A.


RETAIL2104-0228 Black $44.952104-0229 Blue 44.952104-0230 Red 44.95


RETAIL2104-0231 Yellow $44.952104-0232 White 44.95

2104-0228

2104-0229

2104-0230

2104-0231

2104-0232SUPERVOLT 12VIGNITION COILS•The original Andrews ignition coil adds great performance with a classic look

•Replacement coils deliver 30,000+ volts•2.8 ohm coil fits electronic ignition/dual fire•4.8 ohm coil fits points ignition/dual fire•Produce more voltage than a stock coil•Sold each

PART # DESCRIPTION SUG. RETAIL2102-0204 4.8 ohm coil, black $62.952102-0205 2.8 ohm coil, red 62.95

2102-0204

2102-0205

DYNA SKULL COIL COVER•Traditionally styled coil cover•Features a black mesh insert•Includes mounting bracket

PART # DESCRIPTION SUG. RETAIL2102-0199 For 00-11 FXD $39.95

SOLENOID END COVER/STARTER BUTTONS•Beautiful T-6 billet aluminum replaces the OEM end cover

•Can be used as primary or auxiliary starter button•Available in triple-plated show chrome or wrinkle black powdercoat finish

•Install in just minutes with OEM hardware•For use with all 90-11 OEM starters and Terry Components 1.2kw or 1.4kw starters, and 1.6kw or 1.8kw Super Slugger high-torque starters


PART # DESCRIPTION SUG. RETAIL2110-0382 Chrome $79.952110-0383 Wrinkle black 79.95

2110-0383

2110-0382

REPLACEMENT REGULATORS AND ROTORS FOR 3-PHASE 50A CHARGING KITS•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILREPLACEMENT REGULATORS2112-0395 For kit PART #2112-0405 $195.952112-0711 For kit PART #2112-0412 215.952112-0712 For kit PART #s 2112-0407, 2112-0408 181.952112-0713 For kit PART #2112-0410 193.952112-0714 For kit PART #2112-0411 224.95REPLACEMENT ROTORS2112-0403 For kit PART #s 2112-0405, 2112-0406, 2112-0410,

2112-0411 213.952112-0402 For kit PART #s 2112-0407, 2112-0408, 2112-0409 109.95

2112-0395

2112-0403

2112-0402

GYZ-SERIES YUASA REFERENCE # DESCRIPTION SUG. RETAIL2113-0246 GYZ20H For 86-90 FLST,

84-90 FXST, 85 FXE, 86-96 XL/XLH $149.95

GYZ-SERIES•Yuasa proudly introduces a new line of batteries•Heavy-duty terminals; patent pending•Flush-mounted terminals with no spacers needed•Extreme vibration resistance and improved charge recovery•Features a higher capacity and longer life•Factory-activated, spill-proof design


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

46

RETRO BATTERY CABLES•Black with red inflec with red ends•4-gauge cable manufactured with pure electrolytic-grade 36-gauge tinned copper strands for maximum current transfer and superior flexibility

•All manufactured with 1/4” and 5/16” cable•Increase starter performance by providing maximum current to starter motor•Sold each•Chrome switch housing available separately•Made in U.S.A.


RETAILPOSITIVE2113-0247 8” $18.952113-0248 10” 19.952113-0249 12” 20.95


RETAILPOSITIVE (CONT)2113-0250 14” $21.952113-0251 16” 22.95


RETAILNEGATIVE2113-0252 8” $18.952113-0253 10” 19.952113-0254 12” 20.95


RETAILNEGATIVE (CONT)2113-0255 14” $21.952113-0256 16” 22.95

INFORMER LED FUEL/BATTERY GAUGE•Cap incorporates LED battery and LED fuel gauge

•Daylight sensor adjusts LED brightness level•Fuel gauge illuminates a single green LED when full, from full to 5/8 tank a string of green LEDs, from 1/2 to 1/4 tank amber LEDs, from 1/4 red LEDs, and when near empty a flashing single red LED

•”Empty” fuel level at which the red LED begins flashing can be set by the rider

•Battery gauge shows green LEDs when the charging system is between 12.5V and 14.5V, amber LEDs if the bike is not charging and flashing red LEDs if charging level exceeds 15V or drops below 10V

•Gauge works in all models with fuel gauge mounted in the left fuel tank (except 08-11 FXST/FLST and FLHR)

•The perfect match for Küryakyn’s flush-mount gas cap

CHROME SWITCH CAP KITS•Update the black OEM switch caps without replacing the entire switch

•Kits available with six caps, eight caps and ten caps

•Chrome switch housings available separately

CUSTOM WIRE HARNESS•Coated wire with retro casing•Marine grade ignition/starter switch with retaining nut

•Relays 30amp and 15 amp, mounting clips and hardware

•Three-way toggle•8’ L•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2212-0368 Informer LED battery/fuel gauge $129.95

PART # DESCRIPTION SUG. RETAILFOR 96-11 MODELS (EXEPT 2011 SOFTAIL/ROCKER)0616-0128 6-piece switch cap kit $29.950616-0129 8-piece radio control switch cap kit 39.950616-0130 10-piece radio/cruise control switch cap kit 49.95


RETAIL2120-0387 Wire harness $191.95

OIL PRESSURE SWITCH•Precision-calibrated replacement oil pressure switch features heavy contacts, brass pressure ferrules, thermo-plastic insulators and brightly finished steel shells

•Designed and tested to ensure consistently accurate pressure thresholds


HANDLEBAR EXTENTION WIRING KITS•Saves time by streamlining handlebar wiring jobs

•Kits include all the materials necessary to extend the wires for hand controls

•Terminals crimped on one end•Cut-to-length design will accommodate up to 20” Apehanger handlebars

•Includes OEM color matching wires and heat shrink•Made in the U.S.A.

REVERSE HANDLEBAR WIRING EXTENSIONS•All the items needed to successfully extend the wiring on 09-11 FL Trike reverse control

•Kits come complete with pre-terminated wires, heat shrink and installation instructions

•Available in 4”, 8”, 12” and 15” lengths•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2106-0125 For 86-11 XL;

repl. OEM #26554-77 $12.95


RETAIL2120-0382 For 96-06 universal application

(except FL models) $34.952120-0383 For 07-11 universal application

(except FL models) 34.952120-0384 For 96-06 FL models 59.952120-0385 For 07-11 FL models 59.95

PART # DESCRIPTION SUG. RETAIL2120-0377 +4” $21.952120-0378 +8” 22.952120-0379 +12” 23.952120-0380 +15” 24.95

2113-02472113-0256

2120-0383 2120-0377

0616-0128

0616-0130

0616-0129


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 11

47

LED “FIRE RING” FOR 7” FACTORY HEADLIGHTS•Innovative billet aluminum headlight rings available in chrome or black anodized

•Two different LED configurations: super-bright white daytime running lights or clean turn signal version featuring super-bright amber LEDs with independent flashing left and right sides

•Simple installation using factory wiring harness

PART # DESCRIPTION SUG. RETAILFOR 93-11 SOFTAIL WITH 7” HEADLIGHT2001-0574 Running lights, chrome ring $199.952001-0571 Running lights, black ring 199.952001-0576 Turn signals, chrome ring 199.952001-0575 Turn signals, black ring 199.95

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLHT/FLHR/FLHX2001-0573 Running lights, chrome ring $199.952001-0572 Running lights, black ring 199.952001-0578 Turn signals, chrome ring 199.952001-0577 Turn signals, black ring 199.95

LED SUN SPOTS™ DRIVING/PASSING LAMP•Upgrade the stock 41/2” driving/passing lamps found on H-D models with lightbars•Feature 162 incredible bright-white Genesis™ II LEDs for unmatched performance•Sold each

PART # DESCRIPTION SUG. RETAIL2040-0819 For all 41/2” H-D light housings $119.95

HEADLIGHT MOUNT BLOCKS•Billet aluminum CNC-machined mount blocks

•Blocks are machined 3/4” wide to accommodate most stock and aftermarket headlights

•Blocks have 5/8” vertical offset, 11/2” forward offset•Chrome or black powdercoat finish


PART # DESCRIPTION SUG. RETAIL2001-0561 Chrome $24.952001-0562 Black 24.95

HEADLIGHT MOUNTS•Headlight mount features a full 4” of adjustability and a great old-school look

•Five 3/8” mounting holes•Mounts under the top triple tree (31/2” center-to-center riser spacing)

•Chrome or powdercoat black finish available•Sold each•Made in the U.S.A.

NOTE: May require the use of longer riser bolts to mount (sold separately).

NOTE: Custom headlight block may be required to properly mount headlight.

PART # DESCRIPTION SUG. RETAIL2001-0563 Chrome $49.952001-0564 Black 49.95

CLAMP-ON DRIVING LIGHTS•Dual 3” halogen driving lights with super-white 35W H3 bulbs•Silver Bullet style light housings•Unique clamp brackets place the lights in front of or beside the exposed fork tubes to allow clearance for other accessories

•Include all necessary installation hardware and wiring harness•Sold in pairs

PART # DESCRIPTION SUG. RETAILFRONT MOUNT2040-0820 Fits 39mm or 41mm fork tubes $299.952040-0822 Fits 49mm fork tubes 299.95

PART # DESCRIPTION SUG. RETAILSIDE MOUNT2040-0821 Fits 39mm or 41mm fork tubes $299.952040-0823 Fits 49mm fork tubes 299.95

2001-0564

2001-0561

2001-0562

2001-0563

2001-0573 2001-0572

2040-0820

2040-0821

2040-0822

2040-0823


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 11

48

TAILLIGHT/LICENSE PLATE MOUNT CONDUIT•Attaches behind side mount taillight/license plate frames with tabs•Hides and protects wires•18” L

PART # DESCRIPTION SUG. RETAIL2120-0386 Taillight/license plate mount conduit $9.95

BOBBER STYLE TAILLIGHT/LICENSE PLATE ASSEMBLIES•Stainless steel light housing with red glass lens•Black powder-coated backing plate •Available in side-mount or OEM styles•Side-mount styles feature 3/4” mounting hole•12V dual-bulb design•Made in the U.S.A.


RETAIL1928 FORD STYLE2010-0793 OEM mount $252.951932 FORD STYLE2010-0794 OEM mount 252.95


RETAIL1940 FORD STYLE2010-0787 Vertical side-mount $232.952010-0786 Vertical radius side-mount 252.952010-0785 Horizontal side-mount 232.952010-0788 OEM mount 232.95


RETAIL1950 PONTIAC STYLE2010-0791 Vertical side-mount $173.952010-0790 Vertical radius side-mount 173.952010-0789 Horizontal side-mount 173.952010-0792 OEM mount 173.95

LAYDOWN TAILLIGHT LENSES•Get a smooth, clean custom look•Matches the rear angle of OEM saddlebags and most OEM rear fenders

•Provides a unique look for most models•Can be used with most laydown license plate mounts•Available in top or bottom tag window designs•Require the use of LED bulb, must order separately; see the 2011 FatBook


RETAILLENS WITH BOTTOM TAG WINDOW2010-0777 Smoke, for

L03-11 models $25.952010-0783 Red, for L03-11 models 23.95LENS WITH TOP TAG WINDOW2010-0778 Smoke, for

L03-11 models 23.952010-0782 Red, for L03-11 models 23.95


RETAILLENS WITH TOP TAG WINDOW (CONT)2010-0780 Smoke, for

99-E03 models $23.95LENS WITH NO TAG WINDOW2010-0779 Smoke, for

L03-11 models 23.952010-0781 Red, for L03-11 models 23.95

2010-0793

2010-0777

2010-0794

2010-0786

2010-0785

2010-07892010-0790

REPLACEMENT TAILLIGHT LENS•Replacement red taillight lens for Drag Specialties side-mount LED taillight PART #2010-0557

•Sold each

NOTE: Not DOT approved.

PART # DESCRIPTION SUG. RETAIL2010-0768 Repl. red taillight lens $4.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 11

49

LED FRONT SIGNAL LIGHTS•CNC-machined aluminum housing•Injection-molded polycarbonate lens•Super-bright LED output with single-function design•Road Glide lights bolt up to stock HD turn signal mounts on the fairing

•Street Glide lights mount to the sides of the upper fork

•Fat Boy and Road King lights attach to the fork tins•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 98-11 FLTR2020-0476 W/ clear lens/amber LEDs, chrome (smooth) $187.952020-0477 W/ clear lens/amber LEDs, chrome (finned) 187.952020-0478 W/ smoked lens/amber LEDs, black anodized (smooth) 187.952020-0479 W/ smoked lens/amber LEDs, black anodized (finned) 187.95FOR 06-11 FLHX (WILL ALSO FIT 97-11 FLHT W/O SPOT LIGHT BRACKETS)2020-0480 W/ clear lens/amber LEDs, chrome 187.952020-0481 W/ smoked lens/amber LEDs, black anodized 187.95FOR 90-11 FLSTF2020-0482 W/ clear lens/amber LEDs, chrome 177.952020-0483 W/ smoked lens/amber LEDs, black anodized 177.95FOR 94-11 FLHR2020-0484 W/ clear lens/amber LEDs, chrome 177.952020-0485 W/ smoked lens/amber LEDs, black anodized 177.95

UNIVERSAL SUPER-BRIGHT LED SILVER BULLETS•LED bulb is deep-dish reflector style for maximum brightness•Wiring exits the light through the hollow mounting bolt•Single-circuit LED Silver Bullets have a single wire and ground through the mount•Dual-circuit LED Silver Bullets have three wires: running light, signal and ground•Measure 21/2”L x 15/8” o.d.•Include clear lens•Sold in pairs

PART # DESCRIPTION SUG. RETAILWITH 3/8”-16 HOLLOW MOUNTING BOLT2040-0831 Red (single circuit) $129.95

PART # DESCRIPTION SUG. RETAILWITH 3/8”-16 HOLLOW MOUNTING BOLT (CONT)2040-0832 Amber (dual circuit) $129.95

PART # DESCRIPTION SUG. RETAILWITH 5/16”-18 MOUNTING BOLT2040-0833 Amber (dual circuit) $129.95

2020-0477

2020-0480

2020-0481

2020-0482

2020-0483

2020-0479

2020-0478

2040-0831 2040-0832 2040-0833


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 11

50

BULLET LED MARKER/SIGNAL LIGHT KITS•Choose kits with standard or hooded bezels, amber or red lights and titanium-coated black chrome or polished stainless steel finish

•Great looking, easy-to-install lights include six pairs of lenses in every kit: flat, domed and bullet, each pair in clear and smoked

•Twenty-five highly visible, vibration-resistant LEDs that will last more than twenty times longer than traditional filament bulbs

•Three-wire design compatible with brake, turn and running light functions•Corrosion-resistant 304 stainless ring, injection-molded high-impact ABS and polycarbonate internal components and water-resistant wire grommets provide long-lasting durability and IP66 waterproof rating

•Universal post installation is perfect for forward or rearward mounting; hooded trim ring can be set at 12, 3, 6 and 9 o’clock positions•Kits include two lights, plus instructions, extra mounting studs, wires and two load resistors (if needed to balance the bike’s signal flash rate)•Not DOT approved

PART # DESCRIPTION SUG. RETAILPOLISHED STAINLESS LED BULLETS2040-0802 W/ standard trim ring and red LED $129.952040-0803 W/ hood trim ring and red LED 129.952040-0804 W/ standard trim ring and amber LED 129.952040-0805 W/ hood trim ring and amber LED 129.95TITANIUM-COATED (BLACK CHROME) LED BULLETS2040-0806 W/ standard trim ring and red LED 129.952040-0807 W/ hood trim ring and red LED 129.952040-0808 W/ standard trim ring and amber LED 129.952040-0809 W/ hood trim ring and amber LED 129.95

PART # DESCRIPTION SUG. RETAILLED BULLET LIGHT OPTIONAL/REPLACEMENT PARTS2040-0810 Chrome standard trim ring (ea.) $9.952040-0811 Chrome hooded trim ring (ea.) 9.952040-0812 Titanium (black chrome) standard trim ring (ea.) 9.952040-0813 Titanium-coated (black chrome) hooded trim ring (ea.) 9.952040-0814 Clear lens kit (1 flat, 1 domed and 1 bullet clear lens) 7.952040-0815 Smoke lens kit (1 flat, 1 domed and 1 bullet

smoked lens) 7.952040-0816 Load resistor (ea.) 3.95

2040-0807

2040-0802

2040-0805

DEEP CUT FACTORY STYLE TURN SIGNALS W/ LED FIRE RING•Deep Cut styled billet housings in chrome or black anodized•Features super bright Fire Ring LED lens kit•Sold each

NOTE: A load equalizer will need to be purchased separately.

PART # DESCRIPTION SUG. RETAILDUAL FUNCTION2040-0839 Chrome w/ amber ring LEDs and amber lens $99.952040-0837 Black w/ amber ring LEDs and amber lens 99.952040-0840 Chrome w/ white ring LEDs and amber lens 99.952040-0838 Black w/ white ring LEDs and amber lens 99.952040-0843 Chrome w/ red ring LEDs and red lens 99.95

PART # DESCRIPTION SUG. RETAILDUAL FUNCTION (CONT)2040-0841 Black w/ red ring LEDs and red lens $99.95SINGLE FUNCTION2040-0844 Chrome w/ red LEDs and red lens 99.952040-0842 Black w/ red LEDs and red lens 99.95

2040-0839 2040-0837

2040-0843

2040-0841

STOGIE FRONT TURN SIGNAL BRACKETS•Billet aluminum construction•Bolts on in place of ugly stock brackets•Design complements stock and Badlands Stogie turn signals

•Accepts any custom bullet light•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 98-11 FLTR2040-0826 Chrome $89.952040-0855 Black $89.95

TURN SIGNAL MOUNTING STUDS•Chrome-plated hollow steel studs•Mounts to turn signals with internal threads

•Perfect for custom mounting, wires run internally through the studs

•Overall length is 3.886”, spacer length is 1.560”

•Sold in pairsPART # DESCRIPTION

SUG. RETAIL

2020-0472 Studs for use with coarse-threaded turn signals (5/16”-18 x .407”) $9.952020-0473 Studs for use with fine-threaded turn signals (5/16”-24 x .407”) 9.95

FRONT TURN SIGNAL RELOCATION KIT•Kit includes 5/16”-24 / 1/2”-20 studs; must re-use the OEM front swivel for a complete installation


PART # DESCRIPTION SUG. RETAIL2020-0390 For 85-86 FXWG, 84-10 FXST, 93-05 FXDWG $43.95

2020-0472

2040-0855

2020-0473

2040-0826


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 11

51

LED SADDLEBAG MARKER/SIGNAL LIGHT KITS•Saddlemen’s new 21/4” flush-mounted LED kits permits easy installation of lights in the back of saddlebags for a clean, custom look

•Kits are available with titanium-coated black chrome or bright polished stainless trim rings with amber lights and multi-faceted clear lenses

•Flush-mounted universal design will mount on the rear surface of most hard or soft saddlebags

•Twenty-five highly visible, vibration-resistant LEDs last more than twenty times longer than traditional filament bulbs

•Three-wire design is compatible with brake, turn and running light functions•Corrosion-resistant 304 stainless steel mounting ring, injection molded high-impact ABS and polycarbonate internal components and water-resistant power plugs provide long lasting durability and IP66 waterproof rating

•Everything you need for easy installation, including instructions for Saddlemen S4 Rigid-Mount, Specific-Fit Quick-Disconnect and Rigid-Mount Specific-Fit Teardrop saddlebags, two lamps plus wires, waterproof electrical connectors, four load resistors (if needed to balance the bike’s signal flash rate) and gaskets to keep your saddlebag weather-resistant

•Not DOT approved

2” SMOOTH STYLE LED SPEEDING BULLET MARKER LIGHTS•Chrome-plated die-cast aluminum•Slick cone design with dual function LEDs•Includes amber and red lenses•Sold each

PART # DESCRIPTION SUG. RETAIL2040-0835 Chrome w/ amber LED $49.952040-0845 Black w/ amber LED 49.952040-0836 Chrome w/ red LED 49.95

PART # DESCRIPTION SUG. RETAIL2040-0846 Black w/ red LED $49.952060-0290 Repl. amber LED 16.952060-0291 Repl. red LED 16.95

PART # DESCRIPTION SUG. RETAIL2040-0800 Kit w/ polished stainless trim ring and amber LED $99.952040-0801 Kit w/ titanium-plated (black chrome) trim ring and amber LED 99.95

2040-0800

2040-0836 2040-0846

LED FORK-MOUNT MARKER LIGHTS•A new twist on Joker’s classic fork mount turn signal/marker lights

•We upgraded our fork mount turn signal/marker lights with a super-bright LED pod for more visibility

•Made from 6061 T-6 billet aluminum, then polished and chrome-plated or black anodized

•Comes with amber LED pod lights•LED pod lights are angled 25 degrees to accommodate the rake of the forks•Available for 39mm, 41mm and 49mm fork tubes•Sold in pairs•Made in the U.S.A.

NOTE: If being used as a turn signal a load equalizer is required.

PART # DESCRIPTION SUG. RETAILFOR 39MM FORKS2020-0488 Black anodized $124.952020-0489 Chrome-plated 124.95



2020-0492 2020-0493

2040-0801

PART # DESCRIPTION SUG. RETAILFOR 49MM FORKS2020-0494 Black anodized finish, amber LED $209.952020-0495 Chrome finish, amber LED 219.95

PART # DESCRIPTION SUG. RETAILFOR 49MM FORKS (CONT)2020-0496 Clear anodized finish, amber LED $209.95

FORK-MOUNTED ASTRO LED TURN SIGNAL/MARKER LIGHTS•Bullet-style super-bright LED turn signal/marker lights really clean up the look of your bike

•Each features nine intensely bright LEDs in a cluster module for light output, amazing for its size (roughly 3/4” diameter at the light source)

•Amber LED light color output•All parts are fully CNC machined from 6061 T-6 billet aluminum

•Available in your choice of chrome, clear anodized or hard black anodized finishes

•Include a trick mating clamp bracket that may be placed in a multitude of positions along the fork leg

•May be rotated into virtually any upward-and-downward setting•Dimensions: a little over 1” diameter, 23/8” long, and stand off the bike 11/2”•Sold in pairs•Made in the U.S.A.

NOTE: If being used as a turn signal, a load equalizer is required.

2020-0494

2020-0495

2020-0496


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 11

52

PLASMA RODS™•Priority patented LED technology that produces a bright, incredibly smooth light output, unlike anything you have seen before

•Single-intensity two-wire design•Work on all 12VDC negative ground systems

•Can be used about anywhere but work great as turn signals or brake lights located between your bags and your fender/filler panel or as a third brake light located under your tour pak

•Use one of a Custom Dynamics Run-Brake-Turn controllers (See 2011 FatBook) to allow your Plasma Rods™ to function as running, brake and turn lights

•Measure 8” x 0.3” x 1” and mount with 3M automotive grade tape (included)

PART # DESCRIPTION SUG. RETAIL2040-0817 Plasma Rod (ea.) $59.95

PART # DESCRIPTION SUG. RETAIL2040-0818 Plasma Rods (pr.) $119.95

PLASMA ROD ADAPTERS•Allows use of Plasma rods on listed models

•No cutting or splicing•Choice of brake or running/brake light adapters

PART # DESCRIPTION SUG. RETAILPLASMA ROD BRAKE LIGHT ADAPTER2050-0083 For 10-11 FLXH/FLTR $24.952050-0081 For 07-09 FLHX 24.952050-0082 For 10-11 FLHX CVO, 09 FLTR CVO 24.95PLASMA ROD BRAKE/RUNNING LIGHT ADAPTER2050-0084 Plasma Rod Dual Converter 4.95

2040-0818

2040-0817

2050-0081

2050-0083

2050-0084

PART # DESCRIPTION SUG. RETAILFOR BULLET/ DEUCE-STYLE TURN SIGNALS2060-0263 Amber single function $69.952060-0265 Amber dual function 69.952060-0267 Amber single function / red dual function 80.952060-0269 Red single function 69.952060-0271 Red dual function 69.952060-0274 White dual function (not DOT approved) 69.95

PART # DESCRIPTION SUG. RETAILFOR FLAT/ FL-STYLE TURN SIGNALS2060-0264 Amber single function $69.952060-0266 Amber dual function 69.952060-0268 Amber single function / red dual function 80.952060-0270 Red single function 69.952060-0272 Red dual function 69.952060-0275 White dual function (not DOT approved) 69.95

LED TURN SIGNAL INSERTS•Upgrade conventional bulb style turn signals to LED style

•Plug and play design•Wide viewing angle•Available in single or dual function styles•Dual color inserts feature 24 outer amber LEDs with 24 inner red LEDs•DOT approved, unless noted•Sold in pairs

2060-0263

2060-0265

2060-0264

2060-0266 2060-0268

2060-0272 2060-0275

2060-0267

2060-0274

LED “FIRE RING” KITS FOR FACTORY “DEUCE STYLE” TURN SIGNAL HOUSINGS•The finest upgrade you can make to factory turn signals; available in dual filament or single filament applications

•Dual function LED design features a billet aluminum ring with seven exposed LEDs (white, amber or red) integrated into the lens to work as running lights and a cluster of LEDs behind the lens for turn signal and or brake light functions; these fit all front and rear applications with a light socket for an 1157 type bulb

•Single filament design features the fire ring LEDs and the cluster of LEDs behind the lens light as one and are for rear turn signal applications with a light socket for an 1156 type bulb

•Simple plug-and-play installation•Sold in pairs

Note: For OEM functionality, all front applications require dual filament kits and rear applications require single filament kits except 09-11 XL883N and 07-11 XL1200N models which require dual filament kits.

NOTE: A load equalizer will be need to be purchased separately.


RETAILDUAL FUNCTION (FOR FRONT/REAR APPLICATIONS W/ 1157 STYLE LIGHT SOCKET)2040-0849 Chrome trim ring w/ amber ring LEDs and amber lens $119.952040-0847 Black trim ring w/ amber ring LEDs and amber lens 119.952040-0850 Chrome trim ring w/ white ring LEDs and amber lens 119.952040-0848 Black trim ring w/ white ring LEDs and amber lens 119.952040-0853 Chrome trim ring w/ red ring LEDs and red lens 119.952040-0851 Black trim ring w/ red ring LEDs and red lens 119.95


RETAILSINGLE FUNCTION (FOR REAR TURN SIGNAL APPLICATIONS W/ 1156 STYLE LIGHT SOCKET)2040-0854 Chrome trim ring w/ red LEDs and red lens $119.952040-0852 Black trim ring w/ red LEDs and red lens 119.95

2040-0847

2040-0851

2040-0849


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 11

53

STREET MAGIC SIGNAL STABILIZERS•If you have replaced your stock turn signals with LEDs and your turn signals flash too fast or do not flash at all, you will need to add a load equalizer

•New slimline design fits where other load equalizer modules cannot go•Alarm compatible•No heat or load•100% waterproof

PART # DESCRIPTION SUG. RETAIL2050-0086 For 10-11 FLHX, 10-11 FLTRX, 6-pin $64.952050-0087 For 10-11 FLHX Screaming Eagle,

09 FLTR Screaming Eagle, 8-pin 64.95

ECLIPZE2® DUAL-INTENSITY MODULE•Converts single intensity LEDs to dual intensity with the advantage of 100% ON running lights and a full-contrast turn signal flash

•Works with any size LED up to 300mA per side•Designed to increase your frontal visibility in four ways: (1) Running light intensity is changed from 30% of full brightness to 100% of full brightness making you motorcycle more visible all at times. (2) When a turn signal is activated, the LEDs flash from 100% to 0% brightness giving more contrast as a turn signal, thus increasing your visibility when you are turning. (3) Because Eclipze2® uses 48 high-powered wide-angle LEDs, they provide more light output than standard incandescent bulbs. (4) Because LEDs illuminate 1/5 of a second faster than standard incandescent bulbs, this provides greater reaction time for other vehicles when your motorcycle is signaling for a turn, at 65mph this equates to 17 ft of reaction distance.

•Eclipze2® LEDs work with emergency hazard flashers and all alarm systems when the vehicle is off or on

PART # DESCRIPTION SUG. RETAIL2050-0085 Eclipze2® dual-intensity module $24.95

HIGH-PERFORMANCE HALOGEN BULBS•Because of their unique filament materials, reflective technology, and proprietary coatings, PIAA bulbs offer far greater output than standard halogen bulbs

•While standard halogen bulbs give off a yellowish light that’s not at all similar to sunlight, PIAA’s technology gives off a whiter, brighter light or piercing amber light, enhancing visibility

•Each bulb is factory tested, ensuring it’s within PIAA’s extremely high manufacturing tolerances and performance standards

•New headlight bulbs are available with Xtreme White and Xtreme White Plus technologies; see the 2011 FatBook for additional Xtreme White/Plus bulbs along with Ion Crystal Yellow, Super Plasma and Star White bulbs

PART # DESCRIPTIONPOWER CONSUMPTION

LIGHT OUTPUT

SUG. RETAIL

H13 HEADLIGHT BULBS (EA.)2060-0285 Xtreme White Plus 65/55W 85/75W $46.95H8 HEADLIGHT BULBS (EA.)2060-0284 Xtreme White 35W 75W 49.95

PART # DESCRIPTIONPOWER CONSUMPTION

LIGHT OUTPUT

SUG. RETAIL

3157 DUAL-FILAMENT STOPLIGHT/TAILLIGHT BULBS (PR.)2060-0289 Xtreme White 8/27W 8/27W $22.953156 SINGLE-FILAMENT TURN SIGNAL BULBS (PR.)2060-0288 Xtreme White 27W 27W 20.95

XTREME WHITE PLUS•Bulbs shine at 4000 Kelvin color temperature•Brightness is close to PIAA’s High Intensity Discharge (HID) lights

XTREME WHITE•Bulbs shine at 4150 Kelvin color temperature•Closest in brightness to PIAA’s High Intensity Discharge (HID) lights

2050-0086

2050-0087

2060-0285

2060-02842060-0289 2060-0288

PLUG-IN ILLUMINATOR•Gives you three running/brake lights and maintain turn signal functions

•Greatly increase the visibiity of motorcycle when seen from the rear•Quick installation without cutting or splicing wires

PART # DESCRIPTION SUG. RETAIL2050-0091 For 91-96 FLT models with 8-pin Deutsch plugs $124.95

INTENSIFIER HIGH-LOW MODULE II•Converts single-function LED, halogen or incandescent bulbs into high-low dual-function bulbs; run-stop, run-turn or high-low

•Works with turn signals, marker lights, neon accent lighting or driving lights

•Capable or running up to two 50W driving lights without any heat issues (two inputs, two outputs)

PART # DESCRIPTION SUG. RETAIL2050-0090 Intensifier high-low module II $68.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 12

54

PART # DESCRIPTIONEND RISE WIDTH

CENTER WIDTH PULLBACK

SUG. RETAIL

CHROME0601-1641 13” Ape Hanger 13” 38” 12.5” 7.5” $199.950601-1643 17” Ape Hanger 17” 38” 12.5” 7.5” 199.95



SUG. RETAIL

BLACK0601-1642 13” Ape Hanger 13” 38” 12.5” 7.5” $199.950601-1644 17” Ape Hanger 17” 38” 12.5” 7.5” 199.95

11/4” BUFFALO HANDLEBARS•Designed to fit Touring bikes with Batwing-style fairings•Knurled, drilled and machined for internal wiring and electronic throttle control•Chrome or gloss-black finish•Accept stock controls and handlebar clamp•Made in the U.S.A.



SUG. RETAIL

1” CHROME HANDLEBARS0601-1637 13” Ape Hanger 13” 38” 12.5” 7.5” $99.950601-1639 17” Ape Hanger 17” 38” 12.5” 7.5” 99.95



SUG. RETAIL

1” BLACK HANDLEBARS0601-1638 13” Ape Hanger 13” 38” 12.5” 7.5” $99.950601-1640 17” Ape Hanger 17” 38” 12.5” 7.5” 99.95

1” HANDLEBARS•Designed to fit bikes equipped with Batwing-style fairings•Seamless steel tubing with a chrome-plated or gloss black finish•.090” wall thickness for maximum strength•Knurled, drilled for internal wiring, notched for electronic throttle control•Made in the U.S.A.



SUG. RETAIL

FOR 08-11 FXDF, 10-11 FXDWG MODELS0601-1536 Chrome 17” 35.5” 9” 5” $285.950601-1539 Chrome 12” 32” 9” 5” 285.950601-1537 Gloss black 17” 35.5” 9” 5” 285.95



SUG. RETAIL

FOR 08-11 FXDF, 10-11 FXDWG MODELS (CONT)0601-1540 Gloss black 12” 32” 9” 5” $285.950601-1538 Flat black 17” 35.5” 9” 5” 285.950601-1541 Flat black 12” 32” 9” 5” 285.95

11/4” STRIP HANDLEBARS•11/4” handlebars with 11/4” clamping area•Requires special 11/4” risers to mount; see the 2011 FatBook

•Polished welds•Slotted for internal wiring•Offer a clean line of sight to the stock mirrors•Made in the U.S.A.

0601-1536

0601-1539

0601-1537

0601-1541

0601-1637

0601-1640

0601-1643

0601-1642

FOR 08-11 FLHT/FLHX AND H-D FL TRIKE

FOR 08-11 FLHT/FLHX AND H-D FL TRIKE


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 12

55

PART # DESCRIPTIONENDRISE WIDTH

CENTERWIDTH PULLBACK

SUG. RETAIL

CUSTOM BENDS (NOT NOTCHED FOR ELECTRONIC THROTTLE CONTROL)0601-1699 10” rise ape hangers (drilled), black 8.13” 32.80” 6.35” 7.19” $63.950601-1702 Narrow glide 12” rise ape hangers (drilled), black 9.98” 30.47” 5.00” 6.91” 63.950601-1695 Bad Boy bars (dimpled), black 6.01” 31.17” 6.90” 4.20” 51.950601-1693 Low-rise drag bars (dimpled), black 2.70” 26.30” 6.31” 5.32” 52.950601-1694 Standard drag bars (dimpled), black 0.00” 27.23” 8.25” 3.81” 48.950601-1692 XLS-style drag bars, black 4.64” 27.14” 4.71” 4.85” 51.95CUSTOM BENDS (NOTCHED FOR ELECTRONIC THROTTLE CONTROL)0601-1697 Sweeper bars for 08-11 FLHR/FLTR models (dimpled), black 10.92” 31.57” 8.50” 7.54” 79.950601-1698 Sweeper bars for 08-11 FLHT/FLHX models (dimpled), black 10.83” 34.70” 12.00” 7.84” 79.950601-1687 Heritage bars for 84-11 models (except FLHT/FLHX) (dimpled and drilled), chrome 11.41” 31.32” 7.46” 5.22” 64.950601-1696 Heritage bars for 84-11 models (except FLHT/FLHX) (dimpled and drilled), black 11.41” 31.32” 7.46” 5.22” 64.950601-1688 Stretch Heritage bars for 84-11 models (except FLHT/FLHX) (dimpled and drilled), chrome 13.13” 31.55” 8.06” 5.34” 66.950601-1689 12” rise ape hangers for 84-11 models (except FLHT/FLHX) (dimpled and drilled), chrome 10.20” 33.45” 7.86” 6.91” 68.950601-1700 12” rise ape hangers for 84-11 models (except FLHT/FLHX) (dimpled and drilled), black 10.20” 33.45” 7.86” 6.91” 68.950601-1690 16” rise ape hangers for 84-11 models (except FLHT/FLHX) (dimpled and drilled), chrome 13.65” 35.13” 8.04” 6.80” 71.950601-1701 16” rise ape hangers for 84-11 models (except FLHT/FLHX) (dimpled and drilled), black 13.65” 35.13” 8.04” 6.80” 71.950601-1685 12” rise ape hangers for 08-11 FLHT/FLHX models (drilled), chrome 10.09” 33.88” 12.00” 10.39” 79.950601-1703 12” rise ape hangers for 08-11 FLHT/FLHX models (drilled), black 10.09” 33.88” 12.00” 10.39” 79.950601-1686 14” rise ape hangers for 08-11 FLHT/FLHX models (drilled), chrome 12.18” 33.87” 12.00” 10.41” 89.950601-1704 14” rise ape hangers for 08-11 FLHT/FLHX models (drilled), black 12.18” 33.87” 12.00” 10.41” 89.95

1” HANDLEBARS•14-gauge steel tubing with chrome or gloss black finish•Diamond knurled 31/2” on-center to prevent slippage•Available drilled, dimpled or dimpled and drilled as noted•Made in the U.S.A.

0601-1703

0601-1702

0601-1687

0601-1695

0601-1688

0601-1686

0601-1690

0601-1692

0601-1693

0601-1700

0601-1699

0601-1697

0601-1694


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 12

56

PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAILFOR 96-11 MODELS (EXCEPT FLHT/FLHX)0601-1691 Chrome 11.56” 32.00” 7.62” 5.61” $164.950601-1709 Black 11.56” 32.00” 7.62” 5.61” 164.95

11/4” HERITAGE HANDLEBARS•Tough, 11/4”-diameter steel handlebars with chrome plating or gloss black finish

•1” center mounting section and 1” grip mounts•Pre-drilled for internal wiring and notched for electronic throttle control

•Knurled 31/2” on-center to prevent slippage•Clamping width is 5.5” to accommodate one-piece top riser clamps•Work with standard controls and grips•May require ETC wire extensions on some models•Made in the U.S.A.



SUG. RETAIL

FOR 08-11 FLHT/FLHX/H-D FL TRIKE0601-1705 12” rise 10.02” 34.91” 12.00” 10.94” $189.950601-1706 14” rise 12.02” 35.06” 12.00” 10.94” 199.95



SUG. RETAIL

FOR 08-11 FLHR/FLTR0601-1707 12” rise 10.08” 34.45” 7.46” 7.60” $164.950601-1708 16” rise 14.32” 34.88” 7.46” 7.68” 174.95

11/4” FAT APE HANGER HANDLEBARS•11/4”-diameter formed steel handlebars with gloss black finish•1” center mounting section and 1” grip mounts•Pre-drilled for internal wiring; notched for electronic throttle control•31/2” on center knurling; clamping width is 5.5” to accommodate one-piece top riser clamps•Work with standard 96-11 style controls and grips•Do not fit with hydraulic clutch•Made in the U.S.A.



SUG. RETAIL

FOR 84-11 FLHT/FLHX MODELS0601-1646 Chrome 13” 36” 12” 8” $299.950601-1647 Black 13” 36” 12” 8” 299.95



SUG. RETAIL

FOR 84-11 MODELS (EXCEPT FLHT/FLHX)0601-1648 Chrome 13” 39” 10” 8” $299.950601-1649 Black 13” 39” 10” 8” 299.95

11/4” PRIMAPE HANDLEBARS•11/4” thick steel construction with 1” clamping area•Accommodate both electronic throttle control and cable throttle control•Available in chrome or black•Drilled for internal wiring•Made in the U.S.A.

PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAIL0601-1645 Even Flow bar 11” 32” 6” 8” $149.95

1” EVEN FLOW HANDLEBAR•Incorporates flowing lines and old school style that will liven up the look of any bike

•Accepts stock and most aftermarket controls•Flawless chrome finish•Unknurled with dimples•Made in the U.S.A.

0601-1691

0601-1709

0601-1649

0601-1646

0601-1705

0601-1706

0601-1707

0601-1708


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 12

57



SUG. RETAIL

CHROME0601-1650 12” Ape Hanger 12” 32” 7” 7” $189.950601-1652 16” Ape Hanger 16” 32” 7” 7” 189.95BLACK0601-1651 12” Ape Hanger 12” 32” 7” 7” 189.950601-1653 16” Ape Hanger 16” 32” 7” 7” 189.95



SUG. RETAIL

CHROME0601-1654 12” Ape Hanger 12” 32” 81/2” 7” $209.950601-1656 16” Ape Hanger 16” 32” 81/2” 7” 209.95BLACK0601-1655 12” Ape Hanger 12” 32” 81/2” 7” 209.950601-1657 16” Ape Hanger 16” 32” 81/2” 7” 209.95

1” AND 11/4” NICE CURVES HANDLEBARS•Choose from 1” or 11/4” in chrome or black powder-coat•Dimpled and drilled for internal wiring•11/4” bars are also knurled (31/2 on-center)•Made in the U.S.A.

PART # DESCRIPTIONEND RISE WIDTH PULLBACK

CENTER WIDTH

SUG. RETAIL

BLACK0601-1658 10” Ape Hanger 10” 401/2” 10” 14” $189.950601-1659 12” Ape Hanger 12” 401/2” 10” 14” 189.950601-1660 14” Ape Hanger 14” 401/2” 10” 14” 189.950601-1661 16” Ape Hanger 16” 401/2” 10” 14” 189.950601-1662 18” Ape Hanger 18” 401/2” 10” 14” 189.950601-1663 20” Ape Hanger 20” 401/2” 10” 14” 189.95

11/4” HANDLEBARS•For use in 1” stock-style handlebar clamps•Knurled and drilled for use with stock-type controls; can use internal wiring

•Accept 1” bar grips and controls•Fit most models with risers 31/2” on-center•1601-1658 through -1663 have custom bends to clear FLHT/FLHX fairings•Made in the U.S.A.

CLIP-ON HANDLEBARS•A great way to give your bike that custom Cafe Racer look while providing a surprisingly comfortable riding position due to their “zero handlebar drop angle” configuration

•Super-clean design features all-CNC-machined billet aluminum clamps and handlebars and includes super strong alloy mounting hardware

•Bars are 1” diameter. 12” long aluminum, constructed from strong 1/8” thick-wall 6061 T-6 tubing

•Available in your choice of hard black anodized and raw aluminum finishes

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILFOR MODELS WITH 39MM FORK TUBES0601-1710 Black anodized finish $209.950601-1711 Raw aluminum finish 209.95

PART # DESCRIPTION SUG. RETAILFOR MODELS WITH 41MM FORK TUBES0601-1712 Raw anodized finish $209.950601-1713 Black aluminum finish 209.95

0601-1710 0601-1712

0601-1661

0601-1670

0601-1666

0601-1674

0601-1669

0601-1651

0601-1652

0601-1654

0601-1657

1” HANDELBARS 11/4” HANDELBARS

PART # DESCRIPTIONEND RISE WIDTH PULLBACK

CENTER WIDTH

SUG. RETAIL

CHROME0601-1664 10” Ape Hanger 10” 40” 8” 12” $184.950601-1665 12” Ape Hanger 12” 40” 8” 12” 184.950601-1666 14” Ape Hanger 14” 40” 8” 12” 184.950601-1667 16” Ape Hanger 16” 40” 8” 12” 184.950601-1668 18” Ape Hanger 18” 40” 8” 12” 184.950601-1669 20” Ape Hanger 20” 40” 8” 12” 184.95BLACK0601-1670 10” Ape Hanger 10” 40” 8” 12” 184.950601-1671 12” Ape Hanger 12” 40” 8” 12” 184.950601-1672 14” Ape Hanger 14” 40” 8” 12” 184.950601-1673 16” Ape Hanger 16” 40” 8” 12” 184.950601-1674 18” Ape Hanger 18” 40” 8” 12” 184.950601-1675 20” Ape Hanger 20” 40” 8” 12” 184.95

FOR 08-11 FLHT/FLHR/FLTR/FLHX/H-D FL TRIKE

FOR 08-11 FLHR/FLTR MODELS


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 12

58

PART # DESCRIPTION SUG. RETAIL0602-0453 Chrome 1.5” tall risers w/ top triple clamp (set) $149.95

CHROME HANDLEBAR RISER/TOP CLAMP KIT•Machined from billet aluminum with a chrome-plated finish•Fit any handlebars that have a 1” diameter in the clamping area•Sold as a kit of two risers, top clamp and hardware•11/4” diameter risers are tapped for 1/2”-13 bolts•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR MOST 84-11 MODELS W/ 31/2” ON-CENTER RISERS AND OFFSET MOUNTING HOLES0603-0319 Nautical star $124.950603-0320 Iron cross 124.95

BLACK HANDLEBAR CLAMPS•Fit 1” handlebars•Bolts to existing risers•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0602-0464 2.5” pullback risers $148.95

DYNA SERIES HANDLEBAR RISERS•Billet aluminum with triple chrome-plated finish•2.5” tall with 2” of pullback; tapped for 1/2”-13 riser bolts•Designed to replace stock 1.5” straight risers found on many 91-06 Dyna models; can also be used for custom applications

•Allow for a more upright seating position, reducing neck, back and shoulder fatigue•For use with 1” handlebars only•Work with stock cables and brake line (minor rerouting may be required)•Accept most handlebar clamps with offset mounting holes•Include hardware for mounting handlebar clamp•Sold in pairs•Made in the U.S.A.

NOTE: Check clearances between handlebars, tank, gauge mounts and dash before operating.

PART # DESCRIPTION SUG. RETAIL1” RISE0602-0454 Chrome $39.950602-0455 Black 39.9511/2” RISE0602-0458 Chrome 39.950602-0459 Black 39.95

PART # DESCRIPTION SUG. RETAIL1” RISE0602-0456 Chrome $39.950602-0457 Black 39.9511/2” RISE0602-0460 Chrome 39.950602-0461 Black 39.95

RISER EXTENSIONS•Two sizes available: 1” or 11/2” rise•For 1” or 11/4” handlebars•Available in chrome or black•Billet aluminum construction•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0602-0462 For standard triple trees $282.950602-0463 For 08-11 FLSTSB 282.95

NAUTICAL STAR DOMED RISERS•Billet aluminum with a black finish•Fits all 11/4” handlebars•3.5” tall•Mounts with existing hardware•Sold in pairs•Made in the U.S.A.

0602-0454

0602-0459

0602-0457

0602-0460

0602-0462

0603-0319

0603-0320

FOR 1” HANDLEBARS FOR 11/4” HANDLEBARS


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 12

59

PART # DESCRIPTION SUG. RETAILCOMPLETE KITS (EXCEPT DRESSER MODELS W/ AUDIO CONTROLS)0610-0501 Kit w/ 5/8” bore master cylinder

for 84-95 single disc models $249.950610-0502 Kit w/ 11/16” bore master cylinder

for 84-95 dual disc models 249.95

PART # DESCRIPTION SUG. RETAILINDIVIDUAL/REPLACEMENT COMPONENTS0610-0505 11/16” dual-disc master cylinder

assembly w/ lever and clamp half for 84-95 models (3/8”-24 banjo bolt) $169.95

0610-0504 5/8” single-disc master cylinder w/ lever and clamp half for 84-95 models 169.95

HANDLEBAR CONTROL KITS WITHOUT SWITCHES•Kits designed to allow master cylinder clearance for 11/4” handlebars•Customize the most visible area the factory overlooked – the handlebar controls•Chrome die-cast clutch/brake controls with switch housings are sold in complete kits or as individual components•OEM wires and switches mount directly into these housings, so there is no need for new wires and switches•Each Complete Kit includes clutch lever assembly with clamp half, a master cylinder assembly with clamp half and the right and left switch housings•Switch Housing Kit includes right and left housing only with mounting hardware•Individual components are available to replace specific pieces instead of the complete assembly; see the 2011 FatBook•Kits come complete with all hardware for easy installation

NOTE: Lower switch housings will not fit 84-95 models with radio control switches in housings.

NOTE: Use appropriate master cylinder rebuild kit and levers for equivalent OEM model year and bore size.

PART # DESCRIPTION SUG. RETAILBRAKE/MECHANICAL CLUTCH CONTROL KITS0610-0532 For 96-07 FLT/FLHX/FLHT/FLTR/FLHR

(11/16” master cylinder) $224.95SWITCH HOUSING KITS0616-0142 For 96-07 FLT/FLHT w/ radio 59.950616-0143 For 96-07 FLHTCU/FLTR w/ radio and cruise 59.95REPLACEMENT UPPER SWITCH HOUSINGS0616-0111 Left switch housing for all 96-11 models 15.950616-0112 Right switch housing for all 96-11 models 15.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT LOWER RIGHT SWITCH HOUSING0616-0146 For 96-07 FLHT/FLHT w/ radio $19.950616-0145 For 96-07 FLHTCU/FLTR w/ radio and cruise,

FLHR w/o cruise 19.950616-0144 For 96-07 FLHR w/o cruise 19.95REPLACEMENT LOWER LEFT SWITCH HOUSINGS0616-0076 For 96-11 FLHT/FLTR/FLHX w/ radio 19.950616-0078 For 96-11 FLHT/FLHR/FLHX w/ radio and cruise 19.950616-0110 For 96-11 FLHT/FLTR/FLHX w/o radio and

cruise, FLHR w/o cruise 19.95

BRAKE/CLUTCH CONTROL KIT AND SWITCH HOUSINGS•Feature chrome brake and clutch controls•Die-cast aluminum switch housings have radiused edges, OEM-style clamps, smooth tops and a chrome finish for a clean look

•Accept OEM style switches and wiring•Switches available separately, see the 2011 FatBook•Brake/clutch controls and switch housings sold separately; order as needed for your application, see the 2011 FatBook

•Master cylinders accept OEM-style rebuild kits and have clearance for all 11/4” handlebars

NOTE: Models with dealer-installed cruise control may require different or additional lower switch housings. Upper and lower switch housings are not compatible with OEM housings.


RETAIL0630-0947 For 08-11 FLHT/FLHR/FLTR/

FLHX and H-D Trikes $99.950630-0946 For 84-11 models

(except 08-11 Dressers, H-D FL Trikes and those with air-reservoir handlebars) 99.95

HIGH ROLLER GRIPS•Billet aluminum construction with a chrome finish

•Feature knurled rubber sleeves for all-day comfort•Grips are approximately 11/2” in diameter•Sold in pairs


RETAIL0630-0948 For 08-11 FLHT/FLHR/

FLTR/FLHX and H-D FL Trikes $24.95

TEXTURED BLACK RUBBER GRIPS•Feature a unique textured layer of thin black rubber over a foam sleeve

•Chrome end caps and throttle sleeve included

•Sold in pairs

0610-0504

0616-0111

0616-01120616-0142

0616-0143

0630-0946

0610-0501

0616-00760616-0078 0616-0110

0610-0532

0616-0146

0616-0145

0616-0144


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 12

60

PART # DESCRIPTION SUG. RETAIL0630-0949 For all 84-11 models (except

08-11 Dressers, H-D FL Trike) $149.950630-0950 For 08-11 FLHT, FLHR, FLHX, FLTR,

H-D FL Trike models 189.95

BLACK OPS TRACKER GRIPS•New Black Ops finish features a machined surface treated through a proprietary military spec process for strength and hardness, then further machined and anodized for a subtle yet striking black-on-black contrast that is scratch, weather and damage resistant; it’s the ultimate low-maintenance finish

•Machined from billet aluminum•Wrapped in genuine Renthal™ brand rubber grip material•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-11 MODELS (EXCEPT 08-11 DRESSERS, H-D FL TRIKE)0630-0951 Black $99.950630-0952 Chrome 99.95FOR 08-11 FLHT/FLHR/FLHX/FLTR, H-D FL TRIKE MODELS0630-0953 Black 139.950630-0954 Chrome 139.95REPLACEMENT GRIP RUBBER0630-0957 Replacement grip rubber (ea.) 11.95

ELITE GRIPS•Durable, knurled rubber sleeves with an embossed PM logo wrapped around machined billet grips

•Optimal comfort and style •Available in black anodized and chrome•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0630-0963 For 08-11 FLHT/FLHR/FLTR/FLHX and H-D FL Trike $99.95

WIDOW GRIPS•Spider-themed hand grips provide comfort and way-bad style

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL0630-0962 For 08-11 FLHT/FLHR/FLTR/FLHX

and H-D FL Trike $74.95

ISO™-FLAME GRIPS•Feature a unique flamed pattern in the soft raised rubber pads

•Maltese Cross emblazoned end cap•Knurled trim ring adds attitude•Accepts the ISO™-Throttle Boss•Sold in pairs

OLD SKOOL GRIPS•An “old skool” look with a couple of new twists

•Fit all 1” handlebars•Billet aluminum with black finish•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 84-11 MODELS (EXCEPT 08-11 DRESSER AND H-D FL TRIKE)0630-0976 Chrome $89.950630-0975 Black 89.95FOR 08-11 FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKE MODELS0630-0978 Chrome 89.950630-0977 Black 89.95

DEEP CUT COMFORT GRIPS•Conical billet grips machined and finished in chrome or black anodized

•Innovative rubber inserts feature a soft air cushion feel that dampens vibration

•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 84-11 MODELS (EXCEPT 08-11 FLHT/FLHR/FLHX/FLTR, H-D FL TRIKE AND MODELS W/ AIR RESERVOIR IN HANDLEBAR)0630-0967 Chrome $59.950630-0971 Black anodized 59.950630-0970 Chrome w/ throttle boss 78.950630-0974 Black anodized w/ throttle boss 78.95FOR 08-11 FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKE0630-0968 Chrome 59.950630-0972 Black anodized 59.950630-0969 Chrome w/ throttle boss 78.950630-0973 Black anodized w/ throttle boss 78.95

VELVET AIR GRIPS•An incredible soft, vibration dampening grip•Utilizes the same air pockets inside of the grip body as the original Avon Air Cushion grips

•A comfortable ride is provided by the smooth “velvet like” surface•Includes billet aluminum end caps and collars•Matching footpegs and shift pegs are available separately•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0630-0964 ISO®-Throttle Boss $18.950634-0313 Contour ISO®-Throttle Boss 19.95

BLACK ISO™-THROTTLE BOSS•Throttle Boss attaches to the end of the ISO™-Grips

•Small adjustable paddle is positioned under the palm of the hand

•Allows the rider to maintain a steady throttle position with a relaxed grip

•Fits right side grip•Sold each

0630-0952

0630-09650630-0966

0630-09770630-0978

0630-0970 0630-0971

0630-0949

0630-0951

0630-0964 0634-0313

PART # DESCRIPTION SUG. RETAILFOR 84-11 MODELS (EXCEPT 08-11 DRESSER, H-D FL TRIKE AND MODELS WITH HANDLEBAR AIR RESERVOIR)0630-0965 Classic $194.950630-0966 Knurled 194.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

12/13

61

HANDLEBAR CABLE AND BRAKE LINE KITS•Takes “cable calculation” headaches out of swapping handlebars

•Kits give you the correct length cables and brake lines you need so you can complete a handlebar swap, install the new cables/brake lines and ride

•Stainless braided kits include clutch cable, brake lines, chrome “T” brake line junction, banjo bolts, fittings and copper crush washers

•Black vinyl/stainless kits include black vinyl clutch cable and black stainless brake lines with chrome fittings, banjo bolts and crush washers

•Electrical wire extensions not included (available separately)•Made in the U.S.A.

TRIDENT MIRROR•Three-ball mirror stem with double adjustment points and swivel head

•Mirror head has a convex lens; measures 43/4” x 21/8”

•Stem is length is approximately 5”•Mounting hardware included•Sold each

NOTE: Not for use on 04-11 XL.


RETAIL0640-0546 Trident

mirror $69.95

TOURING OVAL MIRRORS•Die-cast construction with a polished and chrome-plated finish

•Convex glass reflector gives a great view of traffic behind you

•Mirror head measures 51/4” x 31/4”

•Include 5” slotted stems•Sold in pairs

PART # DESCRIPTION SUG. RETAIL0640-0527 Touring

Oval Mirrors $99.95

CONCEALED BAR END MIRRORS•Innovative and compact idea for bar end type mirrors

•Come with a 21/4” diameter convex mirror glass that provides you with exceptional rear visibility

•Mirrors are completely CNC-machined from billet aluminum (not cast) making them lightweight and strong; fully adjustable in every direction to fit just about everyone

•Feature a unique solid-mounted outer housing with a 15° rotating swivel mirror section inside•Super-solid units reduce vibration and make for a clearer image in the mirror•With little modification, these units can be mounted through the ends of most existing grips, by drilling or boring the grip end•Sold individually and available in your choice of chrome-plated or Joker’s super durable hard black or clear anodized finish•Each mirror requires one of our expanding mounts (sold separately)•Made in the U.S.A.


RETAILSMOOTH MIRRORS0640-0568 Black anodized $89.950640-0569 Chrome-plated 89.950640-0570 Clear anodized 89.95


RETAIL2 TECH MIRRORS0640-0571 Black anodized $89.950640-0572 Chrome-plated 89.950640-0573 Clear anodized 89.95


RETAILINTERNAL BAR MOUNTS (EA.)0641-0098 For 7/8” steel handlebars $19.950641-0099 For 1” handlebars 19.950641-0100 For 7/8” aluminum handlebars 19.95

HANDLEBAR INSTALLATION KITS•Complete installation kit for 12”, 14” and 16” Burly Ape hangers

•Kits include black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring

•For use with 2” risers•Made in the U.S.A.


RETAILFOR 07-11 FXD0610-0493 12” $199.950610-0496 14” 199.950610-0499 16” 199.95FOR 06 FXD0610-0492 12” 199.950610-0495 14” 199.950610-0498 16” 199.95FOR 98-05 FXD0610-0491 12” 199.950610-0494 14” 199.950610-0497 16” 199.95

BLACK VINYL/STAINLESS KITS


RETAILFOR 08-11 FLTR (W/ ABS)0610-0565 For use w/ OEM handlebars $289.950610-0566 For use w/ Beach bars,

extra wide or extra wide w/ pullback handlebars 289.95

0610-0567 For use w/ Mini Ape Hangers 289.950610-0568 For use w/ 12” - 14” Ape Hangers 289.950610-0569 For use w/ 15” - 17” Ape Hangers 289.950610-0570 For use w/ 18” - 20” Ape Hangers 289.95FOR 08-11 FLHT (W/ ABS)0610-0577 For use w/ OEM handlebars 289.950610-0578 For use w/ Beach bars,


0610-0579 For use w/ Mini Ape Hangers 289.950610-0580 For use w/ 12” - 14” Ape Hangers 289.950610-0581 For use w/ 15” - 17” Ape Hangers 289.950610-0582 For use w/ 18” - 20” Ape Hangers 289.95

STAINLESS BRAIDED KITS


RETAILFOR 08-11 FLTR (W/ ABS)0610-0559 For use w/ OEM handlebars $309.950610-0560 For use w/ Beach bars,


0610-0561 For use w/ Mini Ape Hangers 309.950610-0562 For use w/ 12” - 14” Ape Hangers 309.950610-0563 For use w/ 15” - 17” Ape Hangers 309.950610-0564 For use w/ 18” - 20” Ape Hangers 309.95FOR 08-11 FLHT (W/ ABS)0610-0571 For use w/ OEM handlebars 309.950610-0572 For use w/ Beach bars,


0610-0573 For use w/ Mini Ape Hangers 309.950610-0574 For use w/ 12” - 14” Ape Hangers 309.950610-0575 For use w/ 15” - 17” Ape Hangers 309.950610-0576 For use w/ 18” - 20” Ape Hangers 309.95

0641-00990641-0100

0640-0568

0610-0491

0640-0570 0640-0571

Stainless Braided kitsBlack Vinyl/Stainless kits

0640-0572


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

13/14

DP BRAKES SINTERED METAL BRAKE PADS•Pads have a quick break-in period so you get peak braking performance fast•Made with DP Brakes proven sintered metal pad material•Gray-colored aluminum oxide-based ceramic material on backplate of pad keeps heat away from caliper piston and fluid in extreme conditions for fade-free performance

•Excellent initial bite and feel in both wet and dry conditions•GG friction rated•Quiet and non-abusive to rotors; no brake dust or brake fade

NOTE: Sold in pairs; two pairs required per rear axle.

62

BOTTLE CAP CHOKE CABLE KNOB•Add some flair and personality to your bike

•Personalize your choke knob with the bottle cap from your favorite beverage

•Installs in minutes, and can be changed as often as you like

•Bottle cap not included•Made in the U.S.A.

4-PISTON REAR CALIPER/BRAKE KITS FOR H-D FL TRIKE•Combines Performance Machine’s proven 4-piston calipers with integrated race technology of their master cylinders

•Stage 1 kit includes calipers, master cylinder and brake line

•Stage 2 kit includes calipers, master cylinder, 11.5” brake rotors and brake line


NOTE: Stage II kits require use of 18” rear wheels.


RETAIL0657-0025 For 90-06 Big Twin, 88-06

XL w/ stock choke cable $29.95

PART # DESCRIPTION SUG. RETAILFOR 10-11 FLHTCUTG AND FLHXXX MODELS1701-0377 Stage 1 $1,399.95

PART # DESCRIPTION SUG. RETAILFOR 10-11 FLHTCUTG AND FLHXXX MODELS (CONT)1701-0378 Stage 2 $1,999.95

CLUTCH CABLE FITTING COVERS•Chrome billet aluminum covers fit over the cable end fittings

•Mounting hardware included•Made in the U.S.A.

FRONT BRAKE ROTORS•Unique low carbon rotors feature polished chrome carriers•Provide better braking, improved brake alignment, no rotor distortion, reduced chance of rotor cracking and stylish looks

•Bolt-on design with no modifications and utilize standard H-D calipers•Sold each

PART # DESCRIPTION SUG. RETAILUPPER FITTING COVER0660-0009 For 82-11 5-speed and 6-speed Big Twin $29.95LOWER FITTING COVER0660-0008 For 87-06 Big Twin (except 06 Dyna) (5-speed) 35.950660-0007 For 06 Dyna and 07-11 Big Twin (6-speed) 46.95

DESCRIPTION LEFT FRONT PART # SUG. RETAIL RIGHT FRONT PART # SUG. RETAIL06-11 FXD/FXDC/FXDL (cast wheel) 1710-1215 $185.95 - -06-11 FXD/FXDB/FXDC/FXDL (spoke wheel) 1710-1216 232.95 - -08-11 FXDF (cast wheel) 1710-1216 232.95 - -06-08 FXDWG/10-11 FXDWG (spoke wheel) 1710-1216 232.95 - -06-11 V-Rod 1710-1215 185.95 1710-1215 $185.95

FITS MODEL OEM #DP SINTERED PAD PART #

SUG. RETAIL

REAR BRAKE PADSFor 09-11 FLHTCUTG, 10-11 FLHXXX 83911-09 1721-1298 $44.95

WRATH CONTRAST-CUT™ TWO-PIECE BRAKE ROTORS•420 stainless steel outer band•Machined Contrast Cut™ aluminum carrier•Contrast Cut™ finish starts with a polished carrier that has been black anodized and then re-cut to open up the design

•Specifically designed for use with Performance Machine wheels•Made in the U.S.A.

NOTE: 13” rotor will require the use of PM calipers designed for 13” rotors.

PART # DESCRIPTION SUG. RETAILFOR 00-11 MODELS (EXCEPT 08-11 DRESSERS, H-D FL TRIKE, V-ROD, SPRINGERS, 06-11 DYNA GLIDE FRONT)1710-1225 11.5” rotor, front left $329.951710-1225 11.5” rotor, front right 329.95FOR 00-11 MODELS (EXCEPT 08-11 DRESSERS, H-D FL TRIKE, V-ROD, SPRINGERS, 06-11 DYNA GLIDE)1710-1226 13” rotor, front left 449.95

PART # DESCRIPTION SUG. RETAILFOR 00-11 MODELS (EXCEPT 08-11 DRESSERS, H-D FL TRIKE, V-ROD, SPRINGERS, 06-11 DYNA GLIDE) (CONT)1710-1226 13” rotor, front right $449.95FOR 08-11 FLTR/FLHT/FLHR/FLHX, H-D FL TRIKE (FRONT ONLY), 06-11 DYNA (FRONT ONLY)1710-1227 11.8” rotor, front left 329.951710-1227 11.8” rotor, front right 329.95

0660-0008

1701-0378

1710-1225

1710-1216

0660-0009

1701-0377


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

14/15

63

MASTER CYLINDER REBUILD KIT•Everything you need to rebuild one Performance Machine Contour 9/16” bore brake master cylinder


PART # DESCRIPTION SUG. RETAIL0617-0119 For Performance Machine 9/16”

bore brake master cylinders $39.95

FRONT MASTER CYLINDER COVER•Replace that stock cast cover and add some billet style to your stock master cylinder assembly

•Fully CNC machined from 6061 T-6 bar stock with styling that gives your bike a road-racer look

•Available in your choice of hard black anodized with high-brilliance diamond face cut fins or a chrome-plated finish

•Gold alloy socket head hardware is included with black cover; chrome-plated hardware is included with chrome covers


PART # DESCRIPTION SUG. RETAILFOR 06-11 XL0610-0583 Joker Racing, black anodized $39.950610-0584 Joker Racing, chrome 39.95

REPLACEMENT FUEL GAUGE CAPS•Snap-in cap to replace the left side OEM fuel gauge •Designed matched to RSD gas caps•CNC-machined from billet aluminum•Interchangeable RSD logo badge (black and brass)•Simple installation•Contrast Cut™ finish starts with a polished gas cap that has been black anodized then re-cut to open up the design

•Black Ops finish features a machined surface treated through a proprietary military spec process for strength and hardness, then further machined and anodized for a subtle yet striking black-on-black contrast that is scratch, weather and damage resistant



RETAILFOR L96-11 H-D MODELS0703-0368 Vintage, Contrast Cut™ $69.950703-0369 Vintage, chrome 69.950703-0356 Cafe, Contrast Cut™ 69.950703-0357 Cafe, chrome 69.950703-0358 Cafe, Black Ops 69.95


RETAILFOR L96-11 H-D MODELS (CONT)0703-0362 Tech, Contrast Cut™ $69.950703-0363 Tech, chrome 69.950703-0364 Tech, Black Ops 69.950703-0359 Gear Drive, Contrast Cut™ 69.950703-0360 Gear Drive, chrome 69.95


RETAILFOR L96-11 H-D MODELS (CONT)0703-0361 Gear Drive, Black Ops $69.950703-0365 Tracker, Contrast Cut™ 69.950703-0366 Tracker, chrome 69.950703-0367 Tracker, Black Ops 69.95

GAS CAPS•A great replacement for your hard-to-remove stock gas cap

•Made with finger serrations for a much easier removal over the stock smooth-sided gas cap

•Super-clean and low-profile design features all CNC-machined billet aluminum construction throughout

•After being tightened down, the cap can rotate to any position to align design pattern

•Clear anodized finish•High-quality gas cap base has right-hand threads and is vented•Dimensions: 3” diameter, 1/4” thick at the edge, and 9/16” thick in the center•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR L96-11 H-D MODELS0703-0376 JM U.S.A. $59.950703-0377 Joker 59.950703-0378 Smooth 59.95

“THE SQUEALERS” BRAKE PADS•Made from organic Kevlar® aramid fibers for low-abrasion

•Feature a unique squealing sound to let you know that it’s time to replace your pads, which prevents damage that can occur when pads are overworn

•Provide excellent stopping power without noise and rotor galling, even on polished rotors

•Fingertip control and strong, predictable brake response


PART # DESCRIPTION SUG. RETAILFRONT1720-0073 For 00-07 Big Twin models (exc. Springer models); repl. OEM #44082-00C $39.95REAR1720-0073 For 00-07 Big Twin models (exc. 06-07 FXST, 07 FLSTF), 00-03 XL, 02-05 V-Rod;

repl. OEM #44082-00C 39.951720-0074 For L87-99 Big Twin and XL models (exc. Touring models); repl. OEM #44209-87C 39.95

1720-00731720-0074

0703-0368 0703-0369 0703-0356 0703-0362 0703-0363 0703-0361

0703-0365

0703-03760703-0377 0703-0378

0610-05840610-0583


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 15

64


RETAIL0710-0139 For 93-05 FLHT/

FLHR/FLTR/FLHX and 99-05 Dyna $49.95

ZOMBIE OIL FILLER CAP•Definitely perks up that dull oil filler cap

•Chrome-plated, die-cast construction installs easily and is easy to use

•Sold each

PART # DESCRIPTION SUG. RETAILCHROME0713-0042 For 00-11 FXST/FLST $498.950713-0043 For 99-11 Dyna w/ charcoal canister 498.950713-0070 For 99-11 Dyna w/o charcoal canister 498.950713-0044 For 99-11 FLHT, FLHR, FLTR w/o OEM oil coolers 498.95

PART # DESCRIPTION SUG. RETAILBLACK0713-0045 For 00-11 FXST/FLST $498.950713-0071 For 99-11 Dyna w/o charcoal canister 498.950713-0047 For 99-11 FLHT, FLHR, FLTR w/o OEM oil coolers 498.95REPL. OIL FILTER W/ O-RING0712-0103 For Feuling Oil Filter/Oil Cooler 22.95

OIL FILTER/OIL COOLER•Filtration system designed with an internal glass cartridge filter element•Use as an additional oil filter along with stock spin on oil filter•Drastically reduces contamination and viscosity breakdown in the oil•Protects engine from cylinder, piston, ring and bearing wear•Also prevents extreme oil temperatures to promote engine performance, longer engine life and extended oil change intervals•Mounts above voltage regulator between frame rails to take advantage of airflow off front tire•Includes filter/cooler housing and mounting bracket, replaceable spun glass cartridge filter, off-set oil filter adapter, braided steel lines with swivel fittings, K&N® spin-on oil filter, ARP® 12 bolt fasteners and all necessary hardware

•Available in chrome finish with stainless steel lines and black finish with matching black lines

PART # DESCRIPTION SUG. RETAIL0706-0150 1/4” x 3’ L $15.950706-0151 5/16” x 3’ L 15.950711-0195 3/8” x 8’ L 21.950711-0196 1/2” x 2’ roll (for oil tank drains) 13.95

FUEL/OIL LINES•Reinforced, synthetic rubber, smooth-bore line is fuel- and oil-resistant


GAS CAPS•Available with weld-in bungs for custom applications or with OEM bung inserts for stock tanks•Black, brass or polished finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILWITH STEEL WELD-IN BUNG (VENTED)0703-0371 Flip-top, black $277.950703-0374 Nautical star, brass 230.950703-0375 Nautical star, polished 209.95

PART # DESCRIPTION SUG. RETAILWITH L96-11 OEM BUNG (VENTED)0703-0370 Flip-top, black $277.950703-0372 Nautical star, brass 230.950703-0373 Nautical star, polished 209.95

OIL TANK PLUGS•Billet aluminum•Replaces OEM plug•Available in black•Made in the U.S.A.


RETAILFOR 00-11 FXST/FLST0710-0140 Nautical star $94.950710-0141 Iron cross 94.95

0713-0044

0713-0047

0713-0071

0706-0150

0706-0151

0711-0195

0711-0196

0712-0103

0713-0045

0703-0373

0703-0370

0703-0371 0703-0372

0710-0140

0710-0142

0710-0143

0713-0042

PART # DESCRIPTION SUG. RETAILFOR 07-11 FLHT/FLHR/FLHX/FLTR0710-0142 Natuical star $94.950710-0143 Iron cross 94.95

DIPSTICK COVERS•Made from billet aluminum•Replaces existing cover on existing dipstick•Available in black•Made in the U.S.A.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 16

65

2212-0367

2212-03662212-03642212-03622210-0211

2212-03592211-00992210-0203

MCL 3000 SERIES “DRESSER” REPLACEMENT GAUGES•Previously only available as a six-gauge set, Dakota Digital’s MCL 3000 “Dresser” gauges are now available individually•Plug directly into stock wiring•High-visibility LED display is easy to read, even in direct sunlight•Speedometers and tachometers measure 33/8” while the smaller voltmeters, fuel level, oil pressure and oil temperature gauges come in at 21/16”•Adjustable speedometer features an odometer and dual trip meters•CNC-machined bezels with triple chrome plating•Available with red or blue LED display•See page 975 of the 2011 FatBook for the complete kits as well as optional, specialized gauges to further customize any Bagger’s array of instruments

•Black-anodized bezels are available separately for an alternative to chrome

PART # DESCRIPTION SUG. RETAILFOR 04-11 FLHT, FLTR, FLHX, H-D FL TRIKE2210-0203 Speedometer, blue LED $349.952210-0204 Speedometer, red LED 349.952211-0099 Tachometer, blue LED 349.952211-0100 Tachometer, red LED 349.95FOR 96-03 FLHT, FLTR AND FLHX2210-0205 Speedometer, blue LED 349.952210-0206 Speedometer, red LED 349.952211-0101 Tachometer, blue LED 349.952211-0102 Tachometer, red LED 349.95

PART # DESCRIPTION SUG. RETAILFOR 96-03 FLHT, FLTR AND FLHX (CONT)2212-0359 Voltmeter, blue LED $159.952212-0360 Voltmeter, red LED 159.952212-0361 Oil pressure gauge, blue LED 159.952212-0362 Oil pressure gauge, red LED 159.952212-0363 Oil temperature gauge, blue LED 209.952212-0364 Oil temperature gauge, red LED 209.952212-0365 Fuel level gauge, blue LED 159.952212-0366 Fuel level gauge, red LED 159.95

PART # DESCRIPTION SUG. RETAIL2212-0367 Oil temperature sender for Bagger-style

oil pans (3/8” NPT) $39.95

PART # DESCRIPTION SUG. RETAIL2210-0211 Black bezel for 33/8” dia. gauge $29.952210-0212 Black bezel for 21/16” dia. gauge 19.95

GAUGES

OPTIONAL TEMP SENDER AND BEZELS

PART # DESCRIPTION SUG. RETAIL2201-0130 For 08-11 FLHT, FLHX and FL Trike models $399.952201-0129 For 96-07 FLHT and FLHX models 399.952201-0132 For 08-11 FLHR and Softail models 399.952201-0131 For 96-07 FLHR and Softail models 399.952201-0133 For 86-11 XL models w/ 3.3-gal. tank 399.952201-0134 For 04-10 XL1200C 399.95

DASHLINK™ INTEGRATED FUEL TANK CONSOLE/DOCKING STATION FOR iPhone/iPod touch•DashLink™integrates a complete docking station for iPhone/iPod touch into a sweet replacement fuel tank console for your Harley

•Now available in a black finish•Smart charging system with self-sensing on/off circuit to detect when a device is present

•Audio out circuit using line-level output•Clean ‘wire-free’ appearance•FLHT/FLHX models feature volume up/down control through stock handlebar controls

•iPod touch/iPhone registered trademarks of Apple, Inc.

PART # DESCRIPTION SUG. RETAILSPEEDO/TACHOMETER2210-0103 For 96-03 FLHR and

96-03 FXST/FLST/FXDWG $249.95SUB-WIRE HARNESS2120-0250 For 96-98 FXST/FLST 53.952120-0294 For 96-97 FXDWG 53.952120-0295 For 98 FXDWG 56.952120-0302 For 96-97 FLHR 52.952120-0303 For 98 FLHR 54.95TACHOMETER WIRING KIT2120-0348 For 96-03 FLHR and

96-03 FXST/FLST/FXDWG 4.95

SPEEDO/TACHOMETER•Combination speedometer and tachometer•120 mph speedo, 8000 rpm tachometer•Black face matches the stock gauge look•LCD odometer, trip meter, all stock indicators including check engine light

•Plug-in installation for 99-03 models•All 96-98 models require sub-wire harnesses; sold separately•All 96-03 models require the use of a tachometer wiring kitsold separately

DESCRIPTION BLACK FACE PART # SUG. RETAILKM/H 1:1 ratio 2210-0207 $99.952:1 ratio 2210-0208 99.951:1 ratio 2210-0209 99.952240:60 ratio 2210-0210 99.95

2.4” MINI MECHANICAL SPEEDOMETERS WITH LED INDICATORS•Feature a trip meter and four LEDs built into the face of the speedometer

•Blue for high beam, green for neutral, red for oil pressure and yellow for turn signals

•Accept a 12mm cable•Include wiring, connector and handlebar clamp

2210-0103

2120-0294

2120-0303

2210-0208

2120-0348


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 16

66

FRONT WHEEL SPEEDO DRIVE UNIT•High-quality front wheel speedometer drive unit

•Replaces the OEM unit exactly

SINGLE/DUAL CHROME GAUGE BRACKETS•Highly polished chrome-plated steel bracket•Dual gauge bracket accepts OEM speedometer and tachometer•Single gauge bracket accepts the OEM speedometer•Chrome backing plates included

INDUCTIVE RPM SENSOR•Suitable for connecting tachometers, nitrous systems or anytime a tach signal is required

•Does not require any cutting or splicing into the factory wiring harness, for the safest possible installation

•Simple three-wire installation•Compatible with 04-11 carbureted and EFI engines

2.4” MINI ELECTRONIC TACHOMETERS•State-of-the-art design•Smooth function, 12V, 8000 rpm•Available in black face with white needle or white face with black needle

•Stainless steel water-resistant housing•Backlit with long-lasting LED lighting•Matching speedometers sold separately

NOTE: Tach adapter required for single-fire ignitions.

NOTE: Installing an electric tachometer on 04-11 models requires the use of tach adapter PART # 2211-0030.

PART # DESCRIPTION SUG. RETAIL2211-0103 White face /w black needle $99.952211-0104 Black face w/ white needle 99.95

PART # DESCRIPTION SUG. RETAIL2211-0030 Inductive RPM sensor $74.95

PART # DESCRIPTION SUG. RETAIL2210-0198 Dual gauge bracket for 99-05 FXDX,

95-04 FXDX-CONV, 95-11 XL1200; repl. OEM #67294-95A (also fits 95-04 XL883, 95-04 FXD w/ dual gauge kit upgrades) $119.95

2210-0199 Single gauge bracket for 95-11 XL883, 94-05 FXD models w/ single gauge bracket; repl. OEM #67293-95 76.95

SPEEDO RELOCATION BRACKET•Get a cool Hot Rod look without sacrificing function with this speedometer relocation bracket

•Fully CNC-machined from solid bar – not cast – for optimum quality

•Bracket mounts to the left fork tube, is adjustable in virtually every direction and clears the fuel tank easily

•Outer housing enables you to retain 100% of your instrument lighting and is conveniently located around the right side of the speedo (all LED)

•Engraved, easy-to-see “white-filled” indicator symbols are placed next to the individual micro lights

•Speedo wiring plug is retained without extending the harness; fully straightforward wiring instructions for the indicator lights are provided

•Visibility over the handlebars is greatly improved by removing your stock handlebar bracket mount; at the same time visibility to the speedo is excellent, placed down on the left of the tank and below the bars providing a real racy look

•39/16” i.d.•Made in the U.S.A.

NOTE: Check tank-to-bracket clearance before operating.

PART # DESCRIPTION SUG. RETAILFOR 06-11 DYNA MODELS2210-0223 Black anodized $224.952210-0224 Clear anodized 224.95

PART # DESCRIPTION SUG. RETAIL2210-0202 For 96-99 FLHT, FLHR; repl. OEM #67101-96

(.400” spacer) $33.95

2210-0223

2210-0224

2210-0198

2211-0104

DEEP CUT OIL PRESSURE GAUGE KITS•Finally a clean way to mount an oil pressure gauge on Big Twin and Sportster engines; bracket mounts gauge to rear rocker box

•Features stainless housing and glass lens filled with vibration dampening glycerin

•Includes a 0-60 lb. liquid-filled gauge, billet bracket/cone, stainless steel hose assembly and necessary hardware

NOTE: Check clearance between gauge and gas tank.

PART # DESCRIPTION SUG. RETAIL2212-0370 Complete kit for 99-11 Twin Cam $189.952212-0371 Complete kit for 93-03 XL w/ mid controls only 199.952221-0369 Complete kit for S&S w/ billet rocker boxes 189.95

2212-0370

2210-0199


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

67

PART # DESCRIPTION SUG. RETAIL1301-0126 For 87-99 Softail; repl. OEM #47537-89A $306.95

SOFTAIL SWINGARM•Custom round tube swingarm better matches the OEM frame rails

•Constructed from high-quality steel and precision welded•Accept stock components•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1301-0122 For 88-99 XL; repl. OEM #47547-87 $245.95

XL SWINGARM•Beautifully-crafted stock replacement swingarm•Constructed from steel•Accepts stock components•Polished and chrome plated for a brilliant look•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 07-11 FXST/FLST MODELS (EXCEPT FLSTN)0510-0192 1” under stock length (73/4” L) $59.95FOR 06-11 FXD/FXDWG MODELS0510-0193 1” under stock length (10”L) 49.95FOR 91-05 FXD/FXDWG MODELS0510-0194 Stock length; repl. OEM # 49704-90B (11”L) 52.950510-0195 1” under stock length (10”L) 52.95

CHROME KICKSTANDS•High-strength steel kickstands with a brilliant chrome finish•Replaces OEM kickstands perfectly•Shorter than stock kickstands are for bikes with lowered suspension

PART # DESCRIPTION SUG. RETAIL0510-0196 Weld-on

kickstand mount $64.95

WELD-ON KICKSTAND MOUNT•CNC-machined from forged steel•Raw finish for ease of welding•For use on 11/8” diameter frame tubes•Accepts 52-84 XL kickstand

PART # DESCRIPTION SUG. RETAIL0510-0191 For 86-03 XL $19.95

EASY FIND KICKSTAND EXTENSION•Chrome extension makes hard-to-reach kickstands easier to operate

•Includes mounting hardware

NOTE: Drilling required.

PART # DESCRIPTION SUG. RETAIL0411-0018 For all 86-08 FLST models $89.95

SMOOTH CHROME FORK TINS•High-quality chromed reproduction fork tins•Sold as a 3-piece set

NOTE: Models equipped with front passing lights may need a hole drilled in the rear panel for on/off switch.

0510-0192

0510-0193

0510-0194

0510-0195


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

68

PART # DESCRIPTION SUG. RETAIL0405-0306 For 00-05 FXDX/T $91.95

FORK SPRINGS•High-quality, high-performance replacement fork springs

•A Progressive Suspension rate spring has the advantage of a rising rate resistance to compression

•The benefit of this is that the spring can be soft enough at the start of the travel to offer a “plush” ride, yet firm enough at the end of the travel to soak up the big bumps

•Spring rates have been chosen to reduce front end dive during braking, yet still provide excellent ride comfort



RETAILSTANDARD KITS0405-0308 For 84-96 FLT/FLHT/

FLHR/FLHX/FLTR models $339.95


RETAILLOWERING KITS0416-0062 For 84-96 FLT/FLHT/

FLHR/FLHX/FLTR models $399.95

MONOTUBE FORK CARTRIDGE KITS•Converts dual damper rod to high-performance cartridge forks•Contains a pair of high-performance, gas-charged mono-tube fork cartridges•Improves resistance to front brake dive, front end stability, cornering and bottoming control•No modification for forks required•Lowering kits lower the front end up to 2”•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0416-0060 For 09-11 VRSCF V-Rod $129.95

DROP-IN FRONT FORK LOWERING SYSTEM•Transforms a time-consuming installation process into a quick and simple job

•Lowers front end of your bike up to 2” without disassembling the forks

•Entire procedure can be accomplished with basic tools


PART # DESCRIPTION SUG. RETAIL0406-0026 For 87-05 FXD, 87-11 XL

and 87-94 FXR w/ 39mm forks; repl. OEM # 45401-87 $13.95

FORK DUST SEALS•Keep dirt and dust out of the fork seals to ensure long fork life

•Black molded rubber; sold in pairs

PART # DESCRIPTION SUG. RETAIL84-11 FLT/FLHT, 86-11 FLST/C/N, FLHR/FLTR, 90-11 FLSTF, 06-11 FLHX0411-0016 Chrome plated $499.950411-0017 Black anodized 499.95

EXTENDED FORK BOOTS•Replaces OEM factory fork lower leg cover•Machined from 6061 billet aluminum•Extended down the leg to give a unique look•Styled to match the Battistini Line•Chrome plated or black anodized and highlight cut•Sold in pairs

PART # DESCRIPTION SUG. RETAIL39MM0415-0017 For 91-05 FXR/FXD models (except FXRT),

87-11 XL models (except XL1200N) $129.9541MM0415-0018 For 84-11 FXST/FLST models,

93-05 FXDWG models 139.9549MM0415-0019 For 06-11 FX models (except FXDWG/FXDSE),

02-11 VRSCA/VRSCB/VRSCD V-Rods 119.95

CHROME FRONT FORK BRACES•Increase the torsional rigidity of your front fork•Provides a great looking accessory that also improves handling•Really makes a difference on bikes equipped with a single disc front brake

•CNC-machined from solid billet aluminum then high-luster polished and chromed to perfection

0411-0016

0411-0017

0415-0017

0415-0018

0415-0019

0405-0308

0416-0062


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

69

FITS MODEL COLOR 11” 11.5” 12” 12.5” 13” SUG. RETAILHEAVY DUTYFor 10-11 FXDWG CHR 1310-0633 - 1310-0642 - - $199.95For 08-11 FXDF CHR 1310-0633 - 1310-0642 - - 199.95For 06-11 FXD/B/C/L CHR 1310-0633 - 1310-0642 - - 199.95For 91-05 FXD/B/C/L CHR 1310-0633 - 1310-0642 - - 199.95For 93-08 FXDWG CHR 1310-0633 - 1310-0642 - - 199.95For 06-11 FLHT/FLHR/FLHX/FLTR (except H-D FL Trike) CHR - 1310-0640 - 1310-0648 1310-0654 199.95For 85-05 FLT/FLHT/FLHR/FLTR CHR - 1310-0637 - 1310-0645 1310-0651 199.95

BLK - 1310-0745 - - - 199.95For 87-94 FXLR CHR 1310-0631 1310-0637 - 1310-0644 1310-0650 199.95

BLK 1310-0741 1310-0745 - - 1310-0747 199.95For 85-94 FXR/FXRS/FXRT CHR 1310-0631 1310-0637 - 1310-0644 1310-0650 199.95

BLK 1310-0741 1310-0745 - - 1310-0747 199.95For 04-11 XL CHR 1310-0635 1310-0639 - 1310-0647 1310-0653 199.95For 86-03 XL CHR 1310-0631 1310-0637 - 1310-0644 1310-0650 199.95

BLK 1310-0741 1310-0745 - - 1310-0747 199.95For 08-11 XR1200/1200X CHR - - - - 1310-0653 199.95

FITS MODEL COLOR 11” 11.5” 12” 12.5” 13” SUG. RETAILSTANDARDFor 10-11 FXDWG CHR 1310-0632 - 1310-0641 - - $199.95

BLK 1310-0742 - - - - 199.95For 08-11 FXDF CHR 1310-0632 - 1310-0641 - - 199.95

BLK 1310-0742 - - - - 199.95For 06-11 FXD/B/C/L CHR 1310-0632 - 1310-0641 - - 199.95

BLK 1310-0742 - - - - 199.95For 91-05 FXD/B/C/L CHR 1310-0632 - 1310-0641 - - 199.95

BLK 1310-0742 - - - - 199.95For 93-08 FXDWG CHR 1310-0632 - 1310-0641 - - 199.95

BLK 1310-0742 - - - - 199.95For 06-11 FLHT/FLHR/FLHX/FLTR (except H-D FL Trike) CHR - 1310-0639 - 1310-0647 1310-0653 199.95For 85-05 FLT/FLHT/FLHR/FLTR CHR - 1310-0636 - 1310-0644 1310-0650 199.95

BLK - 1310-0744 - - 1310-0747 199.95For 87-94 FXLR CHR 1310-0630 1310-0636 - 1310-0643 1310-0649 199.95

BLK 1310-0740 1310-0744 - 1310-0746 - 199.95For 85-94 FXR/FXRS/FXRT CHR 1310-0630 1310-0636 - 1310-0643 1310-0649 199.95

BLK 1310-0740 1310-0744 - 1310-0746 - 199.95For 04-11 XL CHR 1310-0634 1310-0638 - 1310-0646 1310-0652 199.95

BLK 1310-0743 - - - - 199.95For 86-03 XL CHR 1310-0630 1310-0636 - 1310-0643 1310-0649 199.95

BLK 1310-0740 1310-0744 - 1310-0746 - 199.95For 08-11 XR1200/1200X CHR - - - - 1310-0652 199.95

DRAG SPECIALTIES SHOCK ABSORBERS•Shock bodies are steel construction with multi-stage velocity-sensitive hydraulic dampers

•Feature progressive rate springs that provide a softer initial response, but resist bottoming better than stock springs

•Improved damping rates for a more comfortable and controlled ride•5-position adjustable spring pre-load (adjusting tool included)•Chrome-plated or black covers and springs for style•Custom lengths available for stock ride height or a lowered, custom look•Manufactured to Drag Specialties specifications by Progressive Suspension•Sold in pairs•TUV approved•Made in the U.S.A.

NOTE: Lowering the motorcycle will reduce ground and cornering clearance.

NOTE: Heavy Duty Applications are recommended for bikes that are operated at or near the manufacturer’s maximum load rating over 50% of the time.

To use the 11” shocks on FXDWG models the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown on Figure 1 inset. Then install one shock with springs removed and compress shock to verify that the belt guard clearance is sufficient.

1310-0641

1310-0641

1310-0742


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

70

APPLICATION COLOR 12” 13” SUG. RETAILFLT, FLHTFor 84-05 FLT, FLHT, FLHR, FLTR CHR - 1310-0702 $299.95DYNAFor 91-11 Dyna Glide (except 00-05 FXDX, FXDXT) w/ cover BLK 1310-0705 - 358.95XLFor 04-11 XL CHR - 1310-0708 299.95

BLK - 1310-0707 299.95For 08-11 XR1200/1200X CHR - 1310-0708 299.95

APPLICATION COLOR 11” 12” 13” SUG. RETAILDYNAFor 91-11 Dyna Glide (except 00-05 FXDX, FXDXT) w/ cover BLK - 1310-0704 - $358.95FXRFor 84-94 FXR/FXRS/FXRT CHR 1310-0706 - - 358.95For 87-94 FXLR CHR 1310-0706 - - 358.95FX, FXWG 4-SPEEDFor 85-86 FX, FXWG w/o cover BLK 1310-0703 1310-0701 - 299.95XLFor 88-03 XL CHR 1310-0706 - - 358.95For 04-11 XL CHR 1310-0711 - - 358.95

412 SERIES SHOCKS•Manufactured from the finest materials available•Designed specifically for Harley models•The 412s simple, durable design makes them a cost effective improvement to your motorcycle’s suspension performance

•The double-wall steel body construction with nitrogen-charged, multi-staged velocity-sensitive valving gives you smooth, consistent damping

•A five-position cam-style spring load preload adjuster lets you easily dial-in your ride•Available with either a standard or heavy duty progressive spring rates•There are multiple style options available, like full show chrome or black covers; or either chrome or black springs and end caps

•Some or all shocks listed have T‹V approval. Refer to most recent T‹V certificate for current listing


NOTE: All shocks are measured center-of-eyelet to center-of-eyelet.

NOTE: CHR denotes chrome shock part numbers; BLK denotes black shock part numbers.

NOTE: When installing shocks on 86-11 XL models, it may be necessary to modify or space the chain/belt guard to allow proper clearance.

NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering.

NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide somewhat slower steering.

NOTE: For OEM shock lengths, see Quick Reference Guide in the back of the 2011 FatBook.


STANDARD 412 SERIES SHOCKS

HEAVY-DUTY 412 SERIES SHOCKS

BlackChrome With chrome covers

To use the 11” or 11.5” 412 shock on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in Figure 1 inset. After the fender is trimmed, install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient.

With black covers


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

71

440 IAS SERIES SHOCKS•High-pressure gas-charged for consistent damping performance•Patented Inertia Active System (IAS) damping for unsurpassed handling and comfort•Top mount threaded preload adjuster allows for fine tuning with a simple twist of the cap•Feature two independent rebound damping circuits•Available in chrome billet aluminum end caps with chrome springs or black anodized end caps with powder coated black springs

•Inertia valve determines whether the soft (wheel) circuit or the firm (chassis) circuit is utilized to optimize both handling and comfort automatically

•All three damping circuits, compression, as well as soft and firm rebound are also velocity sensitive

•TUV approved•Made in the U.S.A.

NOTE: CHR = Chrome covers/chrome springs

BLK = Black covers/black springs

NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering.

NOTE: A shock which is slightly shorter than stock may slightly alter the head angle and provide somewhat slower steering.

NOTE: Some or all shocks listed have TUV approval. Refer to the most recent TUV certificate for current listing

NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of catalog.


APPLICATION COLOR 12.5” 13.0” 13.5”SUG.

RETAILV-RODFor 02-06 VRSCA/B/D BLK - 1310-0728 - $590.95For 07-11 VRSCDX CHR - 1310-0731 - 645.95

BLK - 1310-0730 - 590.95FXRFor 84-94 FXR/FXRS/ FXRT/FXLR CHR 1310-0725 - - 645.95

BLK 1310-0724 1310-0726 1310-0727 590.95

APPLICATION COLOR 12.5” 13.0” 13.5”SUG.

RETAILXLFor 04-11 XL CHR 1310-0725 - - $645.95

BLK 1310-0724 1310-0726 1310-0727 590.95For 86-03 XL CHR 1310-0725 - - 645.95

BLK 1310-0724 1310-0726 1310-0727 590.95

APPLICATION COLOR 13.0” SUG. RETAILV-RODFor 02-06 VRSCA/B/D BLK 1310-0729 $590.95For 07-11 VRSCDX CHR 1310-0733 645.95

BLK 1310-0732 590.95

PART # LENGTH SUG. RETAILFOR 91-11 FXD/FXDWG MODELS1310-0739 12.4” $999.95

970 SERIES PIGGYBACK SHOCKS•Precision engineered for riders who demand more from their bikes•High-pressure gas monotube design with deflective disc damping•6061 aluminum tube construction•Adjustable for compression damping via an easily accessible knob•Shock body and the Piggyback reservoir are internally coated to reduce friction•Includes forged aluminum bodies, progressive rate coil springs and threaded preload adjusters


HEAVY-DUTY 440 SERIES SHOCKS

STANDARD 440 SERIES SHOCKS

Forged Aluminum Body

Threaded Preload Adjusters

6061 Aluminum Tube Construction

Deflective Disc Valved Main Piston

Progressive Rate Springs

Hard Chrome Main Shaft

Deflective Disc Valved Compression Piston

Easy Adjust Compression Knob

Piggyback Reservoir

Hard Anodized Internal Coating

High Pressure Gas ChamberLow-Friction

Dynamic Seals

Black Chrome


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

17/18

72

DS-310079DS-310080

ADJUSTABLE SHOCKS•Available in chrome/polished aluminum finish or black wrinkle/black anodized finish

•Feature a large 113/16” diameter damping piston•Adjustable, which allows lowering the bike up to 13/4”•Heavy-duty shocks available for riders 250+ lb.•Rebuildable; made in the U.S.A.

FLAT FENDERS•Top-quality, 14-gauge steel

•Measure 48” L•Available in 6”, 71/2”, 81/2” or 9” widths


PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST, FLSTDS-310084 Standard, chrome $699.95DS-310085 Standard, black 595.951310-0081 Heavy-duty, chrome 699.951310-0082 Heavy-duty, black 595.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FLSTDS-310079 Standard, chrome $699.95DS-310080 Standard, black 595.951310-0079 Heavy-duty, chrome 699.951310-0080 Heavy-duty, black 595.95

PART # DESCRIPTION SUG. RETAIL1401-0335 6” W $48.951401-0336 71/2” W 58.951401-0337 81/2” W 58.951401-0338 9” W 58.95

ADJUSTABLE PASSENGER FLOORBOARDS WITH MOUNTS•The ultimate in passenger comfort; movement of boards 2.5” forward eliminates the problem of passenger’s calves pressing against saddlebag guard rail, also greatly increases foot and leg support over stock boards

•Boards available in either classic steel or billet aluminum; all mounts are CNC-machined from billet aluminum and triple chrome-plated

•Pads are made of anti-vibration neoprene to ensure passenger comfort•Adjust in seconds by pulling the spring-loaded locking pins; no tools required•Install easily without modification to the bike•Available for bikes with OEM or Rinehart exhaust

PART # DESCRIPTION SUG. RETAILFOR 93-09 FLT/FLHT/FLHS/FLTR/FLHR/FLHX/FLHTCUTG WITH OEM EXHAUST1621-0302 Classic steel boards $379.951621-0303 Billet aluminum boards 429.95

PART # DESCRIPTION SUG. RETAILFOR 93-09 FLT/FLHT/FLHS/FLTR/FLHR/FLHX/FLHTCUTG WITH RINEHART TRUE-DUAL EXHAUST1621-0305 Classic steel boards $379.951621-0304 Billet aluminum boards 429.95

21” FRONT FENDER•Composite and fiberglass construction

•Lightweight yet durable•Fits 120/70 tire with a 21” wheel•Requires custom mounting•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1401-0209 For FLHT/FLHR models $249.95

ROAD-ROD® REAR FENDER EXTENSIONS•Designed to work with the Road-Rod® Saddlebag Support kits

•Constructed from fiberglass with a gel coat finish



RETAIL1401-0309 For 02-06 V-Rod

(except VRSDC, VRSCR) $399.951401-0310 For 07-11 VRSCD, VRSCDX,

VRSCX, VRSCAW V-Rod 399.95

FENDER BRACES•1” wide chrome-plated braces are designed to provide necessary support for rigid frame applications

•Constructed of 1/4” thick steel•Available for 5”, 6”, 71/2”, 81/2” or 9” wide flat fenders



RETAIL1413-0016 For 5” and 6” flat fenders $59.951413-0013 For 71/2” flat fenders 59.95


RETAIL1413-0014 For 81/2” flat fenders $59.951413-0015 For 9” flat fenders 59.95

1413-0016

1621-0302Down

1621-0302Up

1621-0303

1621-0303Down

1413-0013

1401-0338

1401-0310


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

73

TRANSFORMER II PASSENGER FLOORBOARDS•Install on OEM floorboard brackets with no additional hardware required

•Feature retractable cruise arms that provide an alternate footrest 41/2” higher and 51/2” farther forward than the stock footpeg/floorboard location

•Boards measure 91/4” x 53/4”•If replacing existing H-D male-mount footpegs, adapter mount PART #1620-0851 must be used (sold separately)

•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 93-11 FLHT, 94-11 FLHR (EXCEPT 04-07 FLHRS, 02-03/07-08 FLHRSE), 98-11 FLTR (EXCEPT 00-01/09 FLTRSE), 93-06 FLT AND FLST W/ H-D ACCESSORY PASSENGER FLOORBOARD KITS1621-0355 Transformer II Floorboards $259.951620-0851 Male-mount splined adapter mounts 24.95

PART # DESCRIPTION SUG. RETAIL1620-0851 Non-pivoting splined male-mount adapters $24.95

NON-PIVOTING MALE-MOUNT ADAPTERS•Designed for use with Küryakyn folding floorboards – Ribbed, Premium, Transformer II and ISO®-Boards

•Avoids a “double-jointed” connection to the motorcycle•Sold in pairs


RETAIL1621-0352 For 00-11 FLST models $76.95

DRIVER FLOORBOARD SPREADERS•Moves the floorboards outward 13/8”•Provide greater comfort by moving the legs away from the gas tank and engine heat

•Work well with oversized primary covers•Kit is easy to install using included hardware•Billet aluminum with a black finish


PASSENGER FLOORBOARD SHORT COMFORT KIT•Provides two additional floorboard positions with blocks and three positions for the floorboards, five positions total both up and down

•Approximately 11/4” to 2” higher than the highest stock setting•The tilted position places the floorboards at an ergonomic plane relieving stress in the legs and calves

•This tilted position also allows the passenger to push into the boards when cornering which provides a more secure feeling

•Provides two additional spacing widths to add additional comfort by placing the floorboards wider apart

•The wider position allows passengers to relax their lower body which takes pressure off of the inner thighs, knees and lower back


PART # DESCRIPTION SUG. RETAILFOR 87-11 FLT, H-D FL TRIKE AND 86-11 FLST W/ OEM D-SHAPED PASSENGER FLOORBOARDS1621-0307 Chrome floorboard inserts $154.951621-0308 Black floorboard inserts 139.95

PASSENGER FLOORBOARD INSERTS•Replace the OEM rubber floorboard pads•Machined from billet aluminum•Knurled pattern rubber inlay•Available in chrome or black powdercoat finish•Include installation hardware and instructions•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1621-0351 For 10-11 FLHX/FLHT/FLHR/FLTR models $89.95

1621-0307 1621-0308

ADJUSTABLE PASSENGER FLOORBOARD MOUNTS•Made from CNC-machined, billet aluminum, then triple chrome-plated

•Accept either stock Harley-Davidson® floorboards or any direct-fit accessory floorboard (floorboards not included)

•Adjust in seconds through a 9” range of motion; simply pull out spring-loaded lock pins, then move board up or down until pin clicks into next position; no tools required

•Available for bikes with OEM or Rinehart exhaust

PART # DESCRIPTION SUG. RETAILFOR 93-09 FLT/FLHT/FLHS/FLTR/FLHR/FLHX/FLHTCUTG1621-0301 For bikes w/ OEM exhaust $329.951621-0306 For bikes w/ Rinehart True-dual exhaust 329.95

1621-0355

1621-0301 1621-0306

1620-0851


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

74

PART # DESCRIPTION SUG. RETAIL1620-0822 Highway pegs with mounts for 11/8” frames $159.95

11/8” HIGHWAY PEGS WITH FRAME MOUNTS•Triple chrome-plated, CNC-machined billet aluminum pegs and mounts clamp to 11/8” frame down tubes

•Adjust 8” forward and back to accommodate any leg length or riding position

•Anti-vibration pegs feature 3/8” mounting bolts and unique locking set screw system that lets the rider set the peg angle

•Fit H-D FL Softail models and FLT models not fitted with engine guards; also fits most other air-cooled motorcycles with 11/8” frame down tubes

•Sold in pairs•Made in the U.S.A. PART # DESCRIPTION

SUG. RETAIL

1610-0227 Cruise Arm III support kit $51.95

CRUISE ARM MARK III SUPPORT KIT•Kit allows you to install Kuryakyn’s Cruise Arm Mark III (sold separately) on 84-11 FLT/FLHT/FLHR/FLTR/FLHX models (unless listed in box note below)

•Support brace fits underneath the frame between the footboard mounting brackets

•Brace supports the stock brackets and keeps them from flexing under the added leverage of the Cruise Arm Mark III

NOTE: The Cruise Arm Mark III will not fit the following models: 04-07 FLHRS/I, 07-08 FLHRSE, 06-11 FLHX/I, 04-05 FLHTCSE, 06-11 FLHTCUSE, 09-11 FLSTC, 05-06 FLSTFSE/I/2, 05-11 FLSTN/I.

PART # DESCRIPTION SUG. RETAIL1620-0852 Female-mount

ISO®-Stirrup mount $24.95

REPLACEMENT ISO®-STIRRUP MOUNTS•For use with Küryakyn ISO®-Stirrups•Female mount•Sold each

PART # DESCRIPTION SUG. RETAIL1620-0855 Full knurled nautical star $189.951620-0854 Radial knurled nautical star 189.95

FOOTPEGS•Available in black anodized finish with natuical star ends

•Features a radial or full knurled design

•Male mount design •Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0859 Chrome $79.951620-0858 Black 79.95SHIFT PEG1603-0153 Chrome 29.951603-0152 Black 29.95

NESS-TECH® FOOTPEGS AND SHIFT PEGS•Machined from 6061 T-6 billet aluminum; available in chrome or black anodized

•Footpegs are available with male mounts•Matching shift pegs sold separately

DESCRIPTION PART #SUG.

RETAIL7/8” 2404-0480 $7.951” 2404-0481 7.9511/8” 2404-0482 7.95

DESCRIPTION PART #SUG.

RETAIL11/4” 2404-0483 $7.9511/2” 2404-0484 9.95

BLACK THREE-PIECE FRAME CLAMPS•Three-piece clamps work great for mounting footpegs, driving lights or other custom applications

•Heavy-duty design with 1/2” through hole•Sold each

1620-08551620-0854

1620-0859

1620-0858

1603-01511603-0150

2404-0481

1603-0152

1603-0153

1620-0857

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0856 Velvet air, chrome $99.951620-0857 Velvet air, black anodized 99.95SHIFTER PEGS1603-0150 Velvet air, chrome 37.951603-0151 Velvet air, black anodized 37.95

CUSTOM MALE-MOUNT FOOTPEGS AND SHIFTER PEGS•Feature an ergonomic Avon seamless rubber grip technology•Come in chrome or black anodized•Fit OEM standard female mount•See page 60 for matching grips •Footpegs sold in pairs; shifter pegs sold each•Made in the U.S.A.

1620-0856


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

18/19

75

SAFETY WARNING: For information on tire care, safety, maintenance, manufacturer’s warranty and other information consult tire manufacturer’s publication(s) and/or website(s) for complete tire information. The tires used for your application must have a load index and speed rating equal to or greater than the tires fitted as original equipment.

PART # DESCRIPTION SUG. RETAILBRACKETS2030-0572 For 02-11 V-rod $104.952030-0573 For universal swingarms with 1/2” shock bolt 104.95LICENSE PLATE BACKING PLATES2030-0540 Chrome 129.952030-0541 Black 129.95

NON-FOLDING SIDE MOUNT LICENSE PLATE BRACKET•Attaches to lower shock bolt so a backing plate with LED illumination lighting (sold separately) bolts on and follows the line of the shock for a clean, tucked-in look

PART # DESCRIPTION SUG. RETAILAXLE SIDE MOUNTS2030-0542 For 09-11 FXST/FLST w/ 25mm axle, chrome $219.952030-0543 For 09-11 FXST/FLST w/ 25mm axle, black 219.952030-0546 For 07-08 FXST/FLST w/ 1” axle, chrome 149.952030-0545 For 00-07 FXST/FLST w/ 3/4” axle, chrome 149.952030-0544 For 86-99 FXST/FLST w/ 3/4” axle, chrome 149.95CUSTOM SIDE MOUNTS2030-0547 Lower shock license plate tab for custom

applications (installs on lower shock bolt) 100.952030-0548 Weld-on mounting tab for custom applications 106.95LICENSE PLATE BACKING PLATES W/ FRAME2030-0540 Chrome 129.952030-0541 Black 129.95

SIDE-MOUNT LICENSE PLATE KITS AND BACKING PLATES•Allows you to run a side-mounted license plate on a folding mount

•Plate is displayed horizontally•License plate backing plates include billet aluminum backing plate, license plate frame and necessary hardware

•White LED license plate light at the top of the plate frame•Mounts and frame assemblies sold separately; you must order one mount and one frame assembly kit for a complete assembly

SIZE LOAD/SPEED INDEX PART # SUG. RETAILREAR240/40R18 TL (79V) 0302-0253 $305.95

NIGHT DRAGON•Performance tires tailored to Harley-Davidson motorcycles

•Excellent mileage-to-grip ratio•Modern tread pattern combines high-performance attributes and a great style

•Outstanding grip at all lean angles

•Special compounds offer incredible straight-line acceleration and traction

•Structural designs provide great stability and comfort

•Tube/tubeless; blackwall•(V)-rated for speeds of 149+ mph

SIZE LOAD/SPEED INDEX PART # SUG. RETAILBT-016 PRO FRONT120/70ZR-17 (58W) 0301-0336 $178.95BT-016 PRO REAR180/55ZR-17 (73W) 0302-0555 239.95190/50ZR-17 (73W) 0302-0556 268.95190/55ZR-17 (75W) 0302-0557 275.95

BATTLAX BT-016 PRO HYPERSPORT•Ultra-high-performance radials designed to maximize the performance of all sport bikes on the road today

•BT016 utilizes a multi-compound formulated with technology from Bridgestone’s latest MotoGP technology (“Silica Rich EX”, “RC Polymer”), for outstanding grip in all conditions

•Silica Rich contains a combination of two special components to improve dry/wet/life performance

•RC Polymer controls the change of properties of rubber in any temperature and assists the Silica effect

•Front: uses dual-compound to provide grip in all riding modes and the parallel S-shaped grooves provide optimal cornering force

•Rear: uses a double-compound to provide stronger traction and the L-shaped grooves enhance shock absorption

•3-D-C.T.D.M. (Comprehensive Tire Design Method) is advanced tire design technology that enables dynamic, three-dimensional simulations of tire performance at all lean angles

•Provides hyper flexibility to respond to strict GP regulation•Includes good bump absorption, grip and stability during high-speed riding

•(W)-rated for speeds up to 168+ mph


RETAIL0350-0115 150/80-16 (SMV) $16.950350-0116 150/80-16 (CMV) 16.950350-0117 180/65-16 (CMV) 27.95

HEAVY-DUTY INNER TUBES•High-quality, heavy-duty rubber inner tubes

•Sold each

2030-0540

2030-0541

2030-0572

2030-05402030-0541

2030-0543

2030-0545

2030-0548

BT-016 Pro Front BT-016 Pro Rear

2030-0573

2030-0547


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 19

76

SAFETY WARNING: When selecting custom wheels, the tires used for your application must have a load index and speed rating equal to or greater than the tires fitted as original equipment. Consult manufacturer’s publication(s) and/or website(s) for complete tire information.

DESCRIPTION PART # SUG. RETAILFRONT WHEELS18” x 3.5” for 08-11 FLTR, FLHT, FLHR, FLHX w/ ABS 0201-1359 $1,349.9518” x 3.5” for 08-11 FLTR, FLHT, FLHR, FLHX, H-D FL trike w/o ABS 0201-1357 1,299.9518” x 3.5” for 00-07 FLTR, FLHT, FLHR 0201-1361 1,299.9521” x 3.5” for 08-11 FLTR, FLHT, FLHR, FLHX w/ ABS 0201-1358 1,449.9521” x 3.5” for 08-11 FLTR, FLHT, FLHR, FLHX, H-D FL trike w/o ABS 0201-1356 1,399.9521” x 3.5” for 00-07 FLTR, FLHT, FLHR 0201-1360 1,399.95 DESCRIPTION LEFT/RIGHT PART # SUG. RETAILREAR WHEELS15.5” x 5” for 09-11 H-D FL Trike models Left 0202-1577 $899.95

Right 0202-1577 899.9518” x 5.5” for 09-11 H-D FL Trike models Left 0202-1578 899.95

Right 0202-1578 899.9515” x 7” for Lehman Renegade conversion kits Left 0202-1579 899.95

Right 0202-1579 899.95

WRATH CONTRAST CUT™ ONE-PIECE ALUMINUM WHEELS•These forged wheels place the highest material strength in the same direction as the operating load, creating a light and strong wheel

•Contrast Cut™ finish starts with a polished wheel that has been black anodized, then re-cut to open up the design

•Feature the contour rim lip for a graceful arc from rim to lip•Made in the U.S.A.

NOTE: 09-11 FLHT, FLHR, FLHX, FLTR front applications require the use of the OEM spacers.

PART # DESCRIPTION SUG. RETAIL0204-03681 18” x 5.5” for 09-11

FLHT/FLHR/FLHX/FLTR (w/ ABS), black $1,154.95

1 Must use Drag Specialties pulley PART #1201-0580 or 1201-0581.

FAT DADDY BLACK 50-SPOKE RADIALLY LACED REAR WHEEL•Wheel features radially laced (straight) 3/8” stainless steel spokes with custom nipples, billet black aluminum custom hub and black steel rims

•Wheel comes sealed so that tubeless tires can be used; valve stem sold separately

•5.5” will fit most applications by modifying the axle spacers and changing the rotor and pulley spacing; frame, swingarm modification, and fender change along with a narrower belt may also be required

•See 2011 FatBook™ for matching front wheels•Made in the U.S.A.

NOTE: It is the installer’s responsibility to determine the required changes.


RETAILFRONT APPLICATIONS; REPL. BEARING OEM #E 0004.02A8A0215-0640 For 03-06 Firebolt XB9R $11.950215-0640 For 03-09 Lightning XB9S 11.950215-0640 For 08-09 1125CR/R 11.950215-0640 For 05-08 Firebolt XB12R 11.950215-0640 For 05-09 Lightning XB12S 11.950215-0640 For 06-09 Ulysses XB12X 11.95REAR APPLICATIONS; REPL. BEARING OEM #E 0005.02A8A (UNLESS NOTED)0215-0639 For 00-09 Blast

(repl. bearing OEM #E6204) 14.950215-0638 For 03-06 Firebolt XB9R 28.950215-0638 For 03-09 Lightning XB9S 28.950215-0638 For 08-09 1125CR/R 28.950215-0638 For 05-08 Firebolt XB12R 28.950215-0638 For 05-09 Lightning XB12S 28.950215-0638 For 06-09 Ulysses XB12X 28.95

WHEEL BEARING KITS•Kits contain all necessary bearings required for each individual wheel application

•Bearings are premium EMQ quality featuring low-drag, double-lip rubber seals that keep water out and improve grease retention

NOTE: Follow OEM-prescribed procedures for installing and checking wheel bearing end play.

PART # DESCRIPTION SUG. RETAILFRONT0214-0570 For 86-99 FLST, FLSTF, FLSTN $58.950214-0577 For 84-87 FXR, 86-87 XL, 85-86 FXE/FXSB 49.95REAR0214-0584 For 08-10 FXST models (13”) 54.950214-0582 For 85-86 Big Twin 4-speed w/ belt drive (12.4375”) 49.950214-0581 For 84-85 FXST Big Twin w/ chain drive (12.1875”) 49.95

CHROME AXLE KITS•Bright chrome finish on axle and hardware beautifies your bike

•Machined from chrome-moly steel to a tolerance of .0005” for a perfect fit

•Kits include axle, spacers, nuts and washers

NOTE: Rear axle length given is measured from the inside of the bolt head to the end of the threads.

Front wheel

0215-0640

0215-0638

0214-0570

0214-0577

Rear trike wheel


RETAIL2402-0128 For most 84-06 Big

Twin, 86-06 XL models $32.95

FRONT AXLE CAPS•ABS construction with a chrome finish•Attach with silicone (silicone sold separately)

•Designed to fit stock-style, 3/4” front axles with 7/8” head and 1/2” hex nut

•Sold in pairs (dealer pack; 10 pairs)

0214-0582

TIRE MONITORING SYSTEM•Monitors tire air pressure and temperature

•Measures air pressure from 10-70 PSI ( ± 2 PSI); also measures in BAR and KPA

•Reads tire internal air temperature from -22° F - 185° F ( ± 50 F); also reads in Celsius

•System includes a handheld remote transceiver with LED display, two sensors that attach to the existing valve stems, tool set, stem nuts, batteries and instructions

PART # DESCRIPTION SUG. RETAIL0363-0044 Tire monitoring system $199.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 20

77

PART # DESCRIPTION SUG. RETAIL2404-0490 1/4” x .750” (4-pk) $13.952404-0491 1/4” x 1.00” (2-pk) 8.952404-0492 5/16” x .812” (4-pk) 14.952404-0493 5/16” x 1.00” (2-pk) 8.95

PART # DESCRIPTION SUG. RETAIL2404-0494 3/8” x .812” (4-pk) $14.952404-0495 3/8” x .875” (4-pk) 14.952404-0496 7/16” x 1.062” (2-pk) 8.952404-0497 7/16” x 1.062” (5-pk) 22.95

PART # DESCRIPTION SUG. RETAIL2404-0498 1/4” x .750” (2-pk) $6.952404-0499 5/16” x 8.12” (2-pk) 7.95

POLISHED STAINLESS STEEL FLANGE WASHER SYSTEM•This system cleans up the stamped flat edge and stepped look of standard flat washers when used with Race Proof™ 12 Point flange bolt

•Every washer is specifically engineered for each size bolt with several key design features•A precision counterbored hole is CNC-machined for the bolt to sit down inside of the washer – when the bolt is installed in the washer the two flanges meet for an almost seamless look

•All washers also feature a tight tolerance hole with an i.d chamfer to clear the large under head radius on Race Proof™ bolts

•To achieve a highly reflective finish a large radius is machined on the edge of each washer – a radius will “shine” and reflect more light than a square edge

•Finally each washer is polished, by hand, to a perfect mirror finish•Washers are available for the entire range of bolt sizes from 1/4” through 7/16” in a variety of diameters; conveniently packaged two or four to a pack with 7/16” x 1.062” washers also packaged in a 5-pack for belt sprocket applications


PART # DESCRIPTION SUG. RETAIL3713-0040 Instant Detailer $6.95

INSTANT DETAILER•Quick detail touch-up•Spray and wipe clean•Showroom-quality shine•Rinse-free•For any plastic and hard surface•Will not attack paint•Prevents build up of dirt and mud•20 fl. oz., 16 oz. net weight, 12 per case; sold each

PART # DESCRIPTION SUG. RETAIL3704-0107 Contact cleaner $8.95

CONTACT CLEANER•Quick drying•Leaves no residue•Safe on most plastics•Prevents corrosion by displacing moisture•Effectively removes soil and other contaminants from electrical components

•20 fl. oz., 13.5 oz. net weight, 12 per case; sold each

PART # DESCRIPTION SUG. RETAIL3850-0143 SoundStik audio isolation tool $479.95

SOUNDSTIK AUDIO ISOLATION TOOL•Must-have tool for proper and accurate diagnostics of air, vacuum and internal mechanical issues

•Uses sound frequency isolation; lets you hear sounds at frequencies you can’t normally hear

•91/2” L solid probe used for internal mechanical diagnostics

•Black probe used for external air, vacuum and liquid leak diagnostics

•Included Soni-Pod used in conjunction with SoundStik to check for leaks in Tour Pak and saddlebags

•Uses included 9V battery•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3850-0142 PicStik for Jims video scope $204.95

PICSTIK FOR JIMS VIDEO SCOPE•Easy-to-use storage device directly downloads and saves AVI video and JPEG snapshots from Jims Video Scope (PART #3850-0122) with a push of a button

•Includes all necessary cables and complete instructions

•Uses 3 AAA batteries (included)•Made in the U.S.A.


RETAIL3850-0144 For 99-11 Twin Cam models $67.95

ENGINE AND TRANSMISSION PLUG KIT•Plugs holes on engines and transmissions when rebuilding

•Helps seal out dirt, dust and more•Kit includes enough pieces for one Twin Cam engine and transmission



RETAIL3802-0047 For 06-11 6-speed

Twin Cam, 84-05 XL $32.953802-0048 For 80-99 Big Twin,

99 5-speed Twin Cam, 99-06 FXST, FLH/FXD 99-05 32.95

TRANSMISSION CASE SHIFTER SHAFT SEAL INSTALLER•Makes installing shifter shaft seal precise and effortless

•Aligns, centers and installs shifter seal to correct depth



RETAIL3801-0194 For 99-11 Twin Cam models $199.95

PISTON JET TEST STAND•Helps determine if piston jet is stuck open or stuck closed

•Assists engine rebuilder to clear jet of all assembly lubes, verify PSI number the jet switches to “on” and visualize spray pattern before cases are sealed

•Does not include piston jet shown in picture•Made in the U.S.A.

3802-00473802-0048

2404-0490


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 20

78

TAPPET PUMP AND TEST STANDS•Allows you to fill hydraulic tappets before assembling valve train

•Helps diagnose loose or spongy tappets that could eventually lead to bleed-down issues or sticky tappets that won’t pump up due to poor hydraulic unit fitment

REAR SEAT MOUNTING SCREW TOOL•Centers on the screw head to keep from scratching or damaging rear fender or screw when installing or removing Softail rear seats


PART # DESCRIPTION SUG. RETAIL3850-0145 For 07-11 FXST that use H-D screw no. 3075 $50.95

DIGITAL TIRE PRESSURE GAUGE•High-precision: accurate to +/- 0.6 psi•0-60 psi•Precise digital readout to 0.1 psi •Continuous pressure reading, no need to reset when activating bleed valve

•Four selectable scales (psi, bar, KG-CM2, kPa)•Large easy-to-read display with back light for low-light applications•Billet aluminum trapezoid body •High-flow push-button bleeder valve for precise pressure adjustment•18’ long high-pressure hose with dual swivels and brass ball type air chuck

•Rubber anti-shock protective boot•Battery powered (1000 tests) with battery strength indicator•Auto-off to extend the battery life•Battery included

PART # DESCRIPTION SUG. RETAIL3801-0190 Digital tire gauge, 0-60 psi $187.95

MINI AIR COMPRESSOR•Portable 12V compressor measures only 4” x 2” x 6” and weighs just 14 oz.

•Features a built-in LED light and 0-120 psi gauge

•4” tire valve hose; 66” power cord

•12” extension alligator clips; 36” extension lighter adapter

•Includes sports needle adapter, inflatable adapter, complete instructions and rugged zippered carry case

PART # DESCRIPTION SUG. RETAIL0363-0040 Mini air compressor $34.95

IGNITION SWITCH FORK LOCK TOOL•Locates on ignition switch face nut that holds switch in place, letting you remove or install switch without damage

•3/8” drive access hole•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3807-0095 For 06-11 Dyna models $49.95

FUEL TANK LOCK RING TOOL•Remove and install the lock ring on motorcycles•Allows access to the fuel filter and pump

PART # DESCRIPTION SUG. RETAIL3804-0028 For 08-11 FLHT series $38.95

3801-0192

3801-0193

CENTER JACK•Sturdy, yet affordable scissor jack for lifting motorcycles for service or cleaning

•Large footprint makes the jack stable; no extra side feet preventing the use of a second jack in close proximity

•Strong enough to lift an entire vehicle by itself; also ideal for lifting the front of the vehicle, the rear of the vehicle, or as a second jack to lift entire vehicle

•Durable rubber top pad protects the vehicle and prevents slipping when raising or lowering the jack

•Heat-treated hex drive turns robust worm gear for precise height adjustment•Lowered height: 31/2”; maximum raised height: 141/2”•Jack width: 151/4”; jack length: 9”•Capacity: 1000 lb.

NOTE: Do not use air or electric impact guns to raise and lower the jack.

PART # DESCRIPTION SUG. RETAIL4110-0048 Center jack $149.95

PART # DESCRIPTION SUG. RETAIL3801-0192 Tappet pump and test stand for 99-11 Twin Cam

hydraulic tappets $265.953801-01931 Adaptor for 84-99 Evo hycraulic tappets 65.951 Must be used in conjunction with PART # 3801-0192.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

20/21

79

3807-0096

3807-0098

SOLAR CHARGER PANELS•Features Battery Tender’s 3-Step Charging Technology•Reverse-polarity protected•Temperature compensation sensor

•Water-proof•Includes a built-in charger


RETAIL3807-0096 5W; 16” W x 13.25” H x 1” D $79.953807-0097 10W; 16” W x 26” H x 1” D 109.953807-0098 15W; 16” W x 38” H x 1” D 149.95

71/4” ROKKER™ SERIES FRONT FAIRING SPEAKERS•High-power three-way ROKKER™ series speakers are the most efficient speakers available when used with a medium to high-powered accessory amplifier

•Feature 2 ohms impedance and 170W+ max power for the ultimate in bass response, extended mid/high frequency range and raw audio power

•Waterproof injection-molded polycarbonate woofer cone•High-flux strength but lite-weight dual-donut Neodymium magnet•High-efficiency vented voice-coil for improved cooling when operating at high volume levels for extended periods

•Custom designed grillwork with high-output titanium-colored tweeter and midrange drivers

•Specially-tuned speaker-mounted passive crossover network for improved fidelity and frequency response

•Top-quality adapter rings/bracket hardware for secure and clean mounting into the fairing

•Hardware included to utilize the old or new designs of the Harley inside-fairing metal-brackets

•Mounting hole pattern and spade electrical connections are exactly the same as the factory specification for total plug-and-play applications without modification

•Come complete with easy-to-follow installation instructions and inside-the-fairing acoustic foam pads to help tighten up the bass and improve overall fairing audio resonance

•PART #4405-0236 are the largest diameter speakers that can be installed into the Harley 06-11 FLHT fairing, with cone volume and mass comparable to a 6X9” speaker

•PART #4405-0237 are specifically for 06-11 Harley Road Glide fairings•Sold in pairs

PART # DESCRIPTION SUG. RETAIL4405-0236 For 06-11 FLHT models $349.954405-0237 For 06-11 FLTR models 349.95

ROKKER™ SERIES 4-CHANNEL FAIRING SPEAKER AMPLIFIER•The worldís most powerful 4-channel speaker amplifier for your Harley Bagger audio system

•Full-range Class G amplifier features 125W RMS per channel X4 channels (500W total) driven continuous into a 2 ohm load at 14.4vdc and 70watts RMS continuous X4 channels into a 4 ohm load

•Amplifier mounts to the top of the custom-made stainless steel bracket system, which has the slots in the bottom section to properly relocate two of the Harley CB, MP3 or XM sat radio modules (if installed)

•Kit includes custom-made plug-n-play wiring harnesses with top-quality heavy gauge power/ground wires to be used in conjunction with the fused battery connection

•Also includes all necessary mounting hardware and complete installation/operation instructions•Amplifier measures 105/8” L x 5” W (at widest point) x 15/8” T

PART # DESCRIPTION SUG. RETAIL4401-0108 For 06-11 H-D Ultra Classic w/ Harley HK radio (will not fit the 11 RoadGlide Ultra) $739.95

SOLAR CONTROLLER•Convert an existing solar panel into a solar charger using Battery Tender’s® patented Super Smart Charging Algorithm

•Usable input range between 5-15 Watts


RETAIL3807-0099 Solar controller $26.95

4405-0236

4405-0237

3807-0097


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 21

80

51/4” ROKKER™ SERIES REAR SPEAKER UPGRADE KIT•Three-way high-performance speaker set 2 ohms impedance and 140W+ max power when used with stock Harley HK radio system, and also durable enough to handle a high-powered accessory amplifier (not included)

•Provide superior bass response, along with an extended mid/high frequency range

•Feature waterproof injection-molded polycarbonate woofer cone, high-flux strength but light-weight Neodymium magnet, high-efficiency voice coil and the latest design grillwork with mounted titanium-color tweeter and midrange drivers

•Mounting hole pattern and spade electrical connections are exactly the same as the factory specification for 100% plug-and-play application

•Include easy-to-follow installation instructions

ROADRUNNER DRINK HOLDER•All Leader mounts and brackets here are machined aluminum with a black anodized finish

•Features a patented slot-and-lug design that makes all parts interchangeable

•Ring features faceted lug to allow six different angles•”Cup” kits include 16 oz. stainless steel, insulated travel mug with spring-loaded “no spill” screw-on lid

•”Insert” kits include canvas “Ultra-Snap” insert with special gripping bands for cans, water bottles, coffee cups, etc.

•Fit left side or right side of most 1” or 11/4” bars, or universal design for flat surface applications and a mount for all 96-11 Harley-Davidson handlebar controls with 11/2” screw spacing


OPTIONAL/SPARE/REPLACEMENT PARTS FOR LEADER ACCESSORIES•All Leader hardware here is machined aluminum with a black anodized finish

•Leader hardware features a patented slot-and-lug design that makes all parts interchangeable (including RoadRunner drink holder)

•For a few extra dollars, riders can mount extra brackets/hardware on almost any flat surface and move electronics or drink holders from place to place



RETAIL4405-0238 For 06-11 FLHT models $169.95

PART # DESCRIPTION SUG. RETAIL4405-0235 Woof Pak™ subwoofer system $699.95

WOOF PAK™•Add the missing bass everyone craves with this clean system•Integrated drop-in subwoofer system is designed to fit into H-D’s King and Ultra Tour-Paks®

•Form-fitted, sealed enclosure featuring JL Audio’s perfectly matched 8” 8W1 subwoofer and XD200 amplifier

•Simple plug-and-play wire harness works with any audio system installed on your bike

•Includes port grommet, port block-off plate, grommet support ring and complete installation instructions


NOTE: Installation requires cutting a sound port in the front of the Tour-Pak®.

PART # DESCRIPTION SUG. RETAILCUP KITS0603-0323 For 1” bars $78.950603-0340 For H-D controls 78.95

PART # DESCRIPTION SUG. RETAILINSERT KITS0603-0327 For 1” bars $78.950603-0341 For H-D controls 78.95


RETAIL0603-0337 Mounting bracket for 1” bars $44.950603-0334 Mounting bracket (reversible) for H-D

controls, includes screws and spacers) 39.950603-0339 eCaddy Deluxe plate

(GPS, Satellite radio) 29.950603-0338 Roadrunner ring 33.95

PART # DESCRIPTION SUG. RETAIL2030-0575 License plate

flag mount $93.95

LICENSE PLATE FLAG MOUNT•Mount bracket and support plate bolt in place behind most license plates quickly and easily

•Improved, reinforced ratcheting system allows for adjustment and better durability

•Flag pole is 12” L•Reinforced one-piece flagpole and 4” x 9” American flag included

PART # DESCRIPTION SUG. RETAIL0521-0916 Fits 1/2” dia. round tubing $79.95

FLAG POLE FOR LUGGAGE RACK•One-piece design for added durability•Improved, reinforced ratcheting system allows you to adjust the angle of the flag without tools

•Includes 4” x 9” American flag•Flag pole is 12”L•Sold each

PART # DESCRIPTION9903-0312 Oil pump/camplate display

OIL PUMP/CAMPLATE DISPLAY•Hand crank display demonstrating difference in friction between using a Feuling® oil pump/camplate and stock H-D oil pump/camplate

•Black, powder-coated with vinyl stickers•Includes turning knob demonstration and brochure and sticker holders stocked with 50 flyers and 50 stickers; additional 50-packs of flyers and stickers also available (sold separately)

•See your Drag Specialties rep on how to get this display at no charge PART # DESCRIPTION

SUG. RETAIL

9904-0877 Drag Specialties oil banner $19.95

OIL BANNER•Drag Specialties oil shop/store banner

•4’ x 11/2’

0603-0323 0603-0340 0603-0327

0603-0341

0603-0337

0603-0334

0603-0339

0603-0338

PART # DESCRIPTION9901-0970 Repl. stickers (50-pk.)9901-0971 Repl. flyers (50-pk.)

INDEX

81

AAdapters, floorboard .....................................73Air cleaner bottle opener..............................35Air cleaner faceplates ....................................31Air cleaners/intakes .......................................31Air compressor, mini ......................................78Air filter ................................................. 32-33, 35Air intakes/cleaners ........................... 30, 32-35Air/fuel ratio controller .................................29All American Rider Saddlebags .......................................................8 Trunk bags........................................................8Alloy Art LED front signal lights .................................49Amplifier ...........................................................79Andrews Cam drive gears ............................................41 Cams ................................................................38 Countershaft gears ......................................42 Ignition coils ..................................................45 Mainshaft gears ............................................42 Mainshafts ......................................................42 Transmission pulleys ....................................44 Valve spring lower collars ...........................37Arlen Ness Air cleaners ....................................................33 Air filters ................................................... 33-34 Derby covers .................................................42 Footpegs/shift pegs ....................................74 Grips ................................................................60 Mirrors ..............................................................4 Shift rods ........................................................44 Speaker grilles .................................................4Audio isolation tool ........................................77Avon Grips ................................................................60 Footpegs/shift pegs ....................................74Axle caps ...........................................................76Axle kits ............................................................76

BBackrests .................................................... 18-19Badlands Intensifier high-low module ......................53 Plug-in illuminator .......................................53 Side-mount license plate brackets ...........75 Stogie front turn signal brackets ............................................50Baffles.................................................... 20-21, 24Banner ...............................................................80Bar-end mirrors ...............................................61Barnett Clutch kits ......................................................43 Clutch spring conversion kit ......................43Baron Passenger floorboard short comfort kit ........................................73Bassani Exhaust baffle ................................................24 Exhaust systems ..................................... 22-24 Mufflers...........................................................24Battery cables ..................................................46Battery gauge ..................................................46Battery Tender Solar charging panels ..................................79 Solar controller .............................................79Battery ..............................................................45Battistinis Extended fork boots ....................................68Bearings, wheel ...............................................76Belt drives ........................................................43Beverage holders ............................................80Bezels ................................................................65Big-bore engine kits ................................. 36-37Bobber style taillight/ license plate assemblies ..............................48Boots, extended fork .....................................68Bottle cap choke cable knob ........................62Bottle opener, air cleaner .............................35Boyesen Quickshot .......................................................30Braces, fender .................................................72Braces, fork ......................................................68Bracket, speedo relocation ...........................66Brackets, gauge ..............................................66Brackets, turn signal ......................................50Brake line kits, handlebar ..............................61Brake pads .................................................. 62-63Brake rotors .....................................................62Brake/rear caliper kits ...................................62BRAKES ........................................................ 62-63Breather kits ....................................................30Bridgestone Tires .................................................................75Bulbs, halogen .................................................53Burly Handlebar installation kits ..........................61

CCable line kits, handlebar ..............................61Cable ties, stainless steel ..............................28Cables, battery ................................................46CABLES ...............................................................62

Cam cover heat sink inserts .........................41Cam drive gears ..............................................41Cams ............................................................ 38-40Cap, oil filler .....................................................64Caps, fuel gauge .............................................63Caps, gas ..................................................... 63-64Carb support bracket .....................................30Cartridge kits, fork .........................................68Cases, engine ...................................................36Center jack .......................................................78Chain-driven cams .................................... 38-40Choke cable knob ...........................................62Clamp-on driving lights .................................47Clamps, frame .................................................74Clamps, handlebar ..........................................58Clip-on handlebars .........................................57Clutch cable fitting covers ...........................62Clutch kits ........................................................43Clutch spring conversion kit ........................43Cobra Mufflers...........................................................26Coil cover .........................................................45Collars, valve spring .......................................37Conduit, taillight/ license plate mount .....................................48Contact cleaner ...............................................77Countershaft gears ........................................42Cover, coil .........................................................45Cover, master cylinder ...................................63Covers, clutch cable fitting ..........................62Covers, dipstick ...............................................64COVERS, SECURITY & GENERAL ......................80Cruise Arm Mark III support kit ....................74Cruise control switch cap kit .......................46Cruise Drive™ mega nut ...............................42Cup holders .....................................................80Custom Dynamics Eclipze2® dual-intensity module................53 LED Sun Spots™ driving/ passing lamp ...............................................47 LED turn signal inserts.................................52 Plasma Rods™ accent light strips .............52 Plasma Rods™ adapters ..............................52 Street Magic turn signal stabilizers ..........53Cycle Electric Regulator and rotor replacements ...........45Cycle Smith Saddlebag extensions ....................................4Cycle Visions Brakes pads ....................................................63 Road-Rod® rear fender extensions ...........72

DD&M Custom Cycle Air cleaner kits ..............................................32 Breather kits ..................................................30 Carb support bracket ..................................30Dakota Digital Gauge bezels .................................................65 Oil temperature sender ...............................65 Speedometers/tachometers/ voltmeters/gauges ....................................65DASHES & GAUGES ..................................... 65-66Daytona Twin Tec Air/fuel ratio controller ...............................29Decal kit, FLHX ...................................................5Derby covers ....................................................42Detailer spray ..................................................77Diamond Industries Polished flange washers .............................77Dipstick covers ................................................64Display ...............................................................80Docking station ...............................................65DP Brakes Brake pads .....................................................62Drag Specialties Axle kits ..........................................................76 Backrests ........................................................18 Cable ties, stainless steel ............................28 Center jack .....................................................78 Clamps, stainless steel .................................28 Coil cover .......................................................45 Exhaust baffle ................................................21 Exhaust heat wrap kits ................................28 Exhaust sensor bungs .................................28 Exhaust systems ...........................................21 Fender skins ..................................................19 Fork braces ....................................................68 Fork dust seals ..............................................68 Fork tins .........................................................67 Frame clamps ................................................74 Front axle caps ..............................................76 Front wheel speedo drive unit ..................66 Fuel/oil lines ..................................................64 Gauge brackets .............................................66 Grips ................................................................59 Handlebar control kits/housings ..............59 Handlebar riser/top clamp kit....................58 Handlebars .....................................................54 Headlight mount blocks ..............................47 Headlight mounts ........................................47 Inner tubes ....................................................75 Kickstand extension .....................................67 Kickstand mount ..........................................67

Drag Specialties (CONT) Kickstands ......................................................67 License plate bar eliminator .........................5 Mini electronic tachometers ......................66 Mini mechanical speedometers .................65 Mirrors ............................................................61 Muffler packing .............................................28 Mufflers..................................................... 21-22 Oil banner .......................................................80 Passenger floorboard inserts ....................73 Pillion pads ..............................................14, 16 Saddlebag bars w/ guards ............................5 Seat mount knob ..........................................19 Seats ...........................................9-10, 14-16, 18 Shifter shaft ...................................................44 Shock absorbers ...........................................69 Spark plug wires ...........................................45 Speedo/tachometer ....................................65 Switch cap kits ..............................................46 Taillight lenses ...............................................48 Tire pressure monitoring system ........76, 78 Tour-Pak luggage rack ...................................6 Turn signal mounting studs .......................50 Wheel bearings .............................................76 Wheels ............................................................76 Windscreens ....................................................3Drag Specialties/Hotop Clutch cable fitting covers .........................62 Front turn signal relocation kit .................50Drink holders ...................................................80Driver floorboard spreaders .........................73Driving lights ...................................................47Driving/passing lamp .....................................47Drop-in front fork lowering system ...........................................68Dual gauge bracket ........................................66Dual-intensity module ...................................53Dust seals, fork ................................................68Dyna Skull coil cover ......................................45Dynojet Power Vision..................................................29

EEasy Start cams ...............................................39EBC Brakes Brake rotors ...................................................62Eddie Trotta Designs Extended saddlebags ....................................7Edelbrock Inductive RPM sensor ..................................66Electric shift kit ...............................................43ELECTRICAL ................................................. 45-46Electronic tachometer connector ..............66Electronic tachometers .................................66End caps ...........................................................27Engine cases ....................................................36Engine kits, big-bore ................................ 36-37Engine management system .......................29ENGINE ......................................................... 36-41Engine/transmission plug kit .......................77Enricheners knobs ..........................................30EXHAUST ..................................................... 20-28Exhaust baffle ...................................... 20-21, 24Exhaust end caps ............................................27Exhaust heat wrap kits ..................................28Exhaust pipes ............................................ 25-26Exhaust quiet insert .......................................20Exhaust sensor bungs ...................................28Exhaust systems ................................. 20-24, 27Extended fork boots ......................................68Extended saddlebags .......................................7Extension, kickstand ......................................67Extensions, rear fender .................................72

FFairing speakers ..............................................79Fender braces .................................................72Fender extensions, rear ................................72Fender skins ....................................................19Fenders, flat .....................................................72Fenders, front .................................................72Feuling Oil filter/oil cooler ........................................64Flag mounts .....................................................80Flag pole, luggage rack .................................80Flange washers ...............................................77Flare windshields ..............................................3Flat fenders ......................................................72Floorboard adapters ......................................73Floorboard inserts ..........................................73Floorboard short comfort kit.......................73Floorboard spreaders ....................................73Floorboards with mounts ....................... 72-73FMF Exhaust system .............................................27 Fuel injection controllers ...........................29Fold-down luggage rack ...............................19Footpegs ..........................................................74FOOTRESTS & LICENSE PLATE FRAMES .......................... 72-75Fork boots ........................................................68Fork braces ......................................................68Fork cartridge kits ..........................................68Fork dust seals ................................................68

Fork lower system ..........................................68Fork springs .....................................................68Fork tins ...........................................................67Fork-mounted Astro LED turn signal/marker lights ............................51Frame clamps ..................................................74Frame mounts/footpegs ..............................74Frame neck covers ...........................................4FRAMES, SUSPENSION & FENDERS ......................... 67-72Front fenders ..................................................72Front fork lowering system..........................68Front master cylinder cover.........................63Front signal lights ..........................................49Front turn signal brackets ............................50Front turn signal relocation kit ...................50Front wheel speedometer drive unit ........................................................66Fuel gauge .......................................................46Fuel gauge caps ..............................................63Fuel injection controllers ..............................29Fuel lines ..........................................................64Fuel tank console/ docking station .............................................65Fuel tank lock ring tool .................................78FUEL/AIR SYSTEMS .................................... 29-35Fuel/oil lines ....................................................64Fueling Oil pump/camplate display .........................80 Reaper® conversion camshafts ..................38

GGas caps ...................................................... 63-64Gauge bezels ...................................................65Gauge, fuel/battery ........................................46Gauges ..............................................................65Gauges, oil pressure .......................................66Gear-driven cams ...................................... 38-40Gears ..................................................................42Gears, cam drive ..............................................41Grips ............................................................ 59-60GYZ Series battery ...........................................45

HHalogen bulbs .................................................53Handlebar cable and brake line kits ................................................61Handlebar clamps ...........................................58Handlebar control kits/housings .................59Handlebar extension wiring kits ..................46Handlebar installation kits ............................61Handlebar riser extensions ...........................58Handlebar riser/top clamp kit ......................58Handlebar wiring extensions .......................46Handlebars ................................................. 54-57Handlebars, clip-on ........................................57HANDLEBARS, CONTROLS & MIRRORS ............................. 54-61Hardstreet Saddlebags .......................................................8HARDWARE, CHEMICALS & TOOLS ................................ 77-79Headlight Fire Ring .........................................47Headlight mount blocks ................................47Headlight mounts ...........................................47Heat sink inserts, cam cover ........................41Heat wrap kits, exhaust .................................28Heated seats ....................................................11Heel shift lever eliminator ............................44Hells Foundry Dashlink™ fuel tank console/ docking station ...........................................65 FLHX decal kit ..................................................5 Woof Pak™ .....................................................80Highway bar rain guards .................................6Highway pegs with frame mounts ..............74Hot Set-Up 124” engine kit ............................36Hotop Clutch cable fitting covers .........................62 License plate bar eliminator .........................5 Passenger floorboard inserts ....................73Housings, handlebar controls ......................59Hydraulic tappet pump test stand ..............78Hypercharger ............................................. 31-32Hypercharger trap door ................................32

IIgnition coils ....................................................45Ignition switch fork lock tool .......................78Ignition wires ..................................................45Inductive RPM sensor ....................................66Inner primary cover accent ..........................42Inner tubes ......................................................75Inserts, floorboard .........................................73Installation kits, handlebar ...........................61Intensifier high-low module .........................53iPhone®/iPod touch® fuel tank console/docking station .............................65ISO®-stirrup mounts .......................................74

JJ&M Rokker™ front fairing speakers .................79 Rokker™ rear speaker upgrade kit ...........80 Rokker™ speaker amplifier .........................79

INDEX

82

JIMS Audio isolation tool ......................................77 Cam cover heat sink inserts .......................41 Cruise Drive™ mega nut .............................42 Engine/transmission plug kit .....................77 Ignition switch fork lock tool .....................78 Picstik video scope .......................................77 Piston jet test stand ....................................77 Rear seat mount screw tool .......................78 Tappet pump test stand..............................78 Transmission case shifter seal installer ...................................77Joker Machine Air cleaner assemblies ........................... 34-35 Clip-on handlebars .......................................57 Front master cylinder cover ......................63 Gas caps ..........................................................63 Mirrors ............................................................61 Points covers .................................................41 Speedo relocation bracket .........................66 Turn signal/marker lights ...........................51

KK&N Air filter ....................................................32, 35Kastar Fuel tank lock ring tool ...............................78 Valve spring compressor ............................78Kerker Mufflers...........................................................25Khrome Werks Exhaust pipes ................................................25 Handlebars ............................................... 55-56 Mufflers...........................................................25 Saddlebag support brackets ........................8Kickstand extension .......................................67Kickstand mount .............................................67Kickstands ........................................................67Klock Werks Flare windshields ............................................3KraftTech Inc Fender braces ...............................................72 Flat fenders ...................................................72 Swingarms .....................................................67Küryakyn .............................................................. Air cleaner kits ..............................................31 Backrests ........................................................18 Clamp-on driving lights ...............................47 Cruise Arm Mark III support kit ..................74 Flag pole for luggage rack ..........................80 Fold-down luggage rack .............................19 Grips ................................................................60 Hypercharger trap door ..............................32 Hyperchargers ......................................... 31-32 Inner primary cover accent ........................42 ISO®-stirrup mounts .....................................74 LED fuel/battery gauge ...............................46 LED Silver Bullets marker lights .................49 License plate flag mount ............................80 Mirrors ............................................................61 Neck cover kit .................................................4 Non-pivoting male-mount floorboard adapters ..................................73 Saddle shields ..................................................5 Saddlebag accents .........................................5 Shift linkages .................................................44 Throttle Boss .................................................60 Tour-Pak relocator kit ...................................6 Zombie oil filler cap .....................................64

LLA Choppers Air cleaner bottle opener ...........................35 Bottle cap choke cable knob ......................62 Handlebar cable and brake line kits ..............................................61 Handlebar extension wiring kits................46 Handlebars ............................................... 56-57 Riser extensions ...........................................58Laydown taillight lens ....................................48Leader Drink holder accessories .............................80 Drink holders .................................................80 Highway bar rain guards ...............................6LED Fire Ring kits, turn signal ......................52LED fork-mount marker lights .....................51LED fuel/battery gauge .................................46LED headlight Fire Ring .................................47LED light strips ................................................52LED saddlebag marker/ signal light kits ..............................................51LED signal lights ........................................ 49-50LED Silver Bullets marker lights ...................49LED speeding bullet marker lights ..............51LED Sun Spots™ driving/ passing lamp .................................................47LED turn signal inserts ...................................52Lens, taillight ...................................................48LePera Seats .............................................. 12-13, 15, 17License plate backing plates ........................75License plate bar eliminator ...........................5License plate brackets, side-mount ............75License plate flag mount ..............................80LIGHTING ...................................................... 47-53

Lights, driving ..................................................47Lines, fuel/oil ...................................................64Load equalizers ...............................................53Lower collars, valve spring ...........................37Lowering system, front fork.........................68Luggage rack flag pole ..................................80Luggage rack, fold-down ..............................19Luggage rack, Tour-Pak....................................6LUGGAGE ......................................................... 7-8

MMainshaft gears ...............................................42Mainshaft ..........................................................42Male-mount floorboard adapters ................73Mark III support kit .........................................74Marker lights .............................................. 49-51Marker/signal light kits, saddlebag .............51Master cylinder cover ....................................63Master cylinder rebuild kit ............................63Mechanical speedometers ............................65Mega nut, Cruise Drive™ ...............................42Mini electronic tachometers ........................66Mini mechanical speedometers ...................65Mirrors ..........................................................4, 61Monotube fork cartridge kits .......................68Monster big bore kits ....................................37Moose Racing Contact cleaner ............................................77 Instant detailer .............................................77Motion Pro Tire pressure gauge .....................................78Mount, kickstand ............................................67Mounts, headlight ..........................................47Mounts, ISO®-stirrup .......................................74Muffler packing ...............................................28Mufflers, slip-on .............................20-22, 24-26Mustang Heated seats ..................................................11 Seats ................................................................11

NNAMZ Reverse handlebar wiring extensions .......................................46Neck covers .......................................................4Ness LED Fire Ring kits ..........................................52 LED headlight Fire Ring ...............................47 LED Speeding Bullet marker lights ............51 Oil pressure gauge kits ................................66 Turn signals with LED Fire Ring .................50Ness-Tech®

Points covers .................................................41 Non-pivoting male-mount floorboard adapters ..................................73NYC Choppers Backrests ........................................................19 Bobber style taillight/ license plate assemblies ...........................48 Derby covers .................................................42 Dipstick covers ..............................................64 Enrichener knobs .........................................30 Footpegs ........................................................74 Gas caps ..........................................................64 Grips ................................................................60 Handlebar clamps .........................................58 Handlebar risers ............................................58 Ignition wires ................................................45 Oil tank plugs .................................................64 Pillion pads ....................................................13 Retro battery cables ....................................46 Seats ....................................................13, 15, 17 Taillight/license plate mount conduit ...........................................48 Wire harness ..................................................46

O124” Hot Set-Up engine kit ............................36Oil cooler/oil filter ..........................................64Oil filler cap ......................................................64Oil filter/oil cooler ..........................................64Oil lines .............................................................64Oil pressure gauge kits ..................................66Oil pressure switch .........................................46Oil tank plugs ...................................................64Oil temperature sender .................................65

PPassenger floorboard inserts .......................73Passenger floorboard short comfort kit ..........................................73Passenger floorboards with mounts ........................................... 72-73Pegs with frame mounts ..............................74Performance Machine Air intakes ......................................................30 Brake rotors ...................................................62 Exhaust end caps ..........................................27 Grips ................................................................60 Master cylinder rebuild kit..........................63 Rear caliper/brake kits ................................62 Wheels ............................................................76PIAA High-performance halogen bulbs .............................................53Pillion pads ................................................. 13-14

Pingel Driver floorboard spreaders .......................73 Electric shift kit .............................................43 Heel shift lever eliminator ..........................44 Shift peg extender .......................................44Pirelli Tires .................................................................75Piston jet test stand ......................................77Piston rings ......................................................37Pistons ..............................................................37Plasma Rods™ accent light strips ...............52Plasma Rods™ adapters ................................52Plug wires ........................................................45Plug-in illuminator .........................................53Plugs, oil tank ..................................................64Points covers ...................................................41Power Vision ....................................................29Progressive Suspension Drop-in front fork lowering system .........68 Fork springs ...................................................68 Monotube fork cartridge kits.....................68 Shock absorbers ..................................... 70-71Python Exhaust baffle .......................................... 21-22 Exhaust systems ...........................................21

QQuickshot .........................................................30

RRadio control switch cap kit .........................46Rain guards, highway bar ...............................6Reaper® conversion camshafts ....................38Rear caliper/brake kits ...................................62Rear fender extensions .................................72Regulators, replacement...............................45Retro battery cables ......................................46Reverse handlebar wiring extensions .........................................46Revolution Performance Engine management system .....................29 Monster big bore kits ..................................37Rings, piston ....................................................37Riser extensions, handlebar .........................58Risers .................................................................58Rivco Handlebar risers ............................................58 Highway pegs with frame mounts ...........74 Passenger floorboards with mounts .......................................... 72-73 Trailer hitch ......................................................6Rivera Primo Belt drives ......................................................43Road-Rod® rear fender extensions .............72Rotors, replacement ......................................45RSD Air cleaner faceplates ..................................31 Air cleaners ....................................................31 Fuel gauge caps ............................................63 Grips ................................................................60Run/turn/brake light module ......................53

SS&S Air cleaners ....................................................35 Air filters .........................................................35 Cams .......................................................... 39-40 Exhaust pipes ................................................26 124” Hot Set-Up engine kit ..........................36 Pistons and piston rings .............................37 Super Stock™ engine cases........................36Saddle shields ....................................................5Saddlebag accents ............................................5Saddlebag bars w/ guards ..............................5Saddlebag extensions ......................................4Saddlebag marker/signal light kits .............51Saddlebag support brackets ..........................8Saddlebags w/ LED marker lights ..................7Saddlebags ..................................................... 7-8Saddlebags, extended .....................................7Saddlemen Bullet LED marker/ signal light kits ............................................50 LED saddlebag marker/ signal light kits ............................................51Saddlebags w/ LED marker lights ..................7Seat ....................................................................11Seals, fork dust ................................................68Seat mount knob ............................................19Seat mount screw tool ..................................78SEATS & SISSY BARS ..................................... 9-19Seats for Custom/Rigid .................................18Seats for Dresser/Touring ......................... 9-12Seats for Dyna Glide ................................. 14-15Seats for Softail ...............................................13Seats for XL ................................................ 16-17Sensor bungs ...................................................28Shift linkages ...................................................44Shift peg extender .........................................44Shift pegs .........................................................74Shift rods ..........................................................44Shifter shaft .....................................................44Shifter shaft seal installer .............................77Shock absorbers ....................................... 69-72Side-mount license plate brackets..............75

Signal lights ............................................... 49-51Silver Bullet marker lights .............................49Single gauge bracket .....................................66Solar charging panels ....................................79Solar controller ...............................................79Solenoid end cover/ starter buttons .............................................45Spark plug wires .............................................45Speaker amplifiers ..........................................79Speaker grilles ...................................................4Speaker upgrade kit .......................................80Speakers ..................................................... 79-80Speeding Bullet marker lights......................51Speedo relocation bracket ...........................66Speedo/tachometer .......................................65Speedometer bracket ....................................66Speedometers .................................................65Spoke wheels ...................................................76Sportech SP fairing ..........................................................4Spreaders, floorboard ....................................73Springs, fork ....................................................68Standard Motorcycle Products Oil pressure switch .......................................46Stop & Go Mini air compressor .....................................78Subwoofers ......................................................80Sun Spots™ driving/passing lamp ..............47Super Stock™ engine cases ..........................36SuperTrapp Mufflers...........................................................25Swingarms ........................................................67Switch cap kits ................................................46Switch, oil pressure ........................................46

TTachometer bracket .......................................66Tachometers .............................................. 65-66Taillight lens .....................................................48Taillight/license plate assemblies ................48Taillight/license plate mount conduit ..............................................48TANKS & OIL FILTERS .................................. 63-64Tappet pump test stand ................................78Terry Components Solenoid end cover/starter buttons ........45Throttle Boss ...................................................60Thunder Cycle Design Front fender ..................................................72Tins, fork ...........................................................67Tire pressure gauge .......................................78Tire pressure monitoring system ..........76, 78Tire tubes .........................................................75Tires ...................................................................75TIRES, TUBES & WHEELS ............................ 75-76Todd’s Cycle Handlebars .....................................................54Top clamp/handlebar riser kit ......................58TOURING .......................................................... 4-6Tour-Pak luggage rack .....................................6Tour-Pak relocator kit ......................................6Trailer hitch ........................................................6TRANSMISSION & DRIVELINE ..................... 42-44Transmission case shifter shaft seal installer ...................................................77Transmission pulleys ......................................44Trunk bags ..........................................................8Tubes, inner .....................................................75Turn signal brackets .......................................50Turn signal inserts ..........................................52Turn signal LED Fire Ring kits .......................52Turn signal mounting studs .........................50Turn signal relocation kit ..............................50Turn signal stabilizers ....................................53Turn signals with LED Fire Ring ....................50

VValve spring compressor ...............................78Valve spring lower collars .............................37Vance & Hines Exhaust baffle ................................................20 Exhaust quiet insert .....................................20 Exhaust systems ...........................................20 Fuel injection controllers ...........................29 Mufflers...........................................................20Video scope picstik ........................................77Voltmeters .......................................................65

WWashers, flange ...............................................77Wheel bearings ...............................................76Wheels ...............................................................76Windscreens ......................................................3WINDSHIELDS ......................................................3Wire harness ....................................................46Wires, plug .......................................................45Wiring kits, handlebar extension .................46Works Performance Shock absorbers ...........................................72

YYuasa GYZ Series battery ........................................45

ZZombie oil filler cap ........................................64

We appreciate the positive feedback from those who have already participated in our Dealer Event Program and want to welcome more of you. When a Drag Specialties Custom Hauler shows up at an Open House, Rally or Ride, you know that legions of dedicated riders are not far behind. Contact your Drag Specialties rep for upcoming dealership opportunities.

WARRANTIES AND GUARANTEESWe do not guarantee the items sold by us or warrant the merchantability or fitness of purpose. Manufacturers supply their own warranties and guarantees and most of them do not permit a wholesaler or distributor to make any adjustment, replace any part or accept for return or exchange any defective or unsatisfactory item. Please follow the guarantee instructions when provided by the manufacturer. Any damages arising from the design or manufacturing of any item are the sole responsibility of the manufacturer.

CATALOG CONTENTSWe believe the contents and specifications of this catalog are correct. We assume no liability for errors in listings, specifications, part numbers, prices or model applications. We reserve the right to change specifications, product descriptions, product quality, pricing and application at any time without further notice and without further obligation. The reproduction of any material from this catalog is forbidden without our written approval.

COPYRIGHT 2011LeMans Corporation

ALL RIGHTS RESERVED

WE SUPPORT THE SPORT®!

All model designations and applications used herein are determined by the manufacturer as USA-specific. Contact the individual manufacturer for additional international model information.

These materials may not be copied or reproduced in any manner without written permission of LeMans Corporation.

BAD BOY, BADLANDER, BUELL, CLASSIC, CONVERTIBLE, CROSSBONES, CRUISE DRIVE, CVO, CUSTOM VEHICLE OPERATIONS, DEUCE, DUO GLIDE, DYNA, DYNA GLIDE, DYNA WIDE GLIDE, ELECTRA GLIDE, EVOLUTION, FAT BOB, FAT BOY, FAT HEAD, FORTY-EIGHT, HARLEY, HARLEY-DAVIDSON, HD, H-D, H-D HERITAGE SOFTAIL, HERITAGE SPRINGER, HYDRA GLIDE, HUGGER, IRON 883, LIGHTNING, LOW RIDER, NIGHTSTER, NIGHT ROD, NIGHT TRAIN, REVOLUTION, ROCKER, ROCKERTAIL, ROAD GLIDE, ROAD KING, SCREAMIN’ EAGLE, SOFTAIL, SPORTSTER, SPRINGER, STREET BOB, STREET GLIDE, STREET ROD, SUPERLOW, SUPER GLIDE, THE TRICK SEAT, T-SPORT, THUNDERBOLT, TOUR-PAK, TRI GLIDE, TWIN CAM, TWIN CAM 88, TWIN CAM 88B, TWIN CAM 96, TWIN CAM 96B, TWIN CAM 103, TWIN CAM 110B, TWIN CAM 110, ULTRA CLASSIC, ULYSSES, V-FIRE III, V-ROD, V-ROD MUSCLE, VRSC, WIDE GLIDE AND XR1200X ARE REGISTERED TRADEMARKS OF THE HARLEY-DAVIDSON MOTOR COMPANY, INC., MILWAUKEE, WI, U.S.A.

HARLEY-DAVIDSON® AND BUELL® MOTORCYCLE MODEL DESIGNATIONS ARE UTILIZED IN THIS CATALOG FOR REFERENCE ONLY:

EL, FL, FLH, FLHC, FLHF, FLHR, FLHRC, FLHRS, FLHRSI, FLHRCI, FLHRI, FLHRSEI, FLHRSE2, FLHRSE3, FLHRSE4, FLHS, FLHT, FLHTI, FLHTC, FLHTCI, FLHTCSE, FLHTCU, FLHTCUI, FLHTCUSE, FLHTCUSE2, FLHTCUSE3, FLHTCUSE4, FLHTCUSE5, FLHTCUSE6, FLHTCUTG, FLHTK, FLHX, FLHXI, FLHXSE, FLHXSE2, FLHXXX, FLST, FLSTI, FLSTC, FLSTCI, FLSTF, FLSTFB, FLSTFI, FLSTFSE, FLSTFSE2, FLSTN, FLSTNI, FLSTS, FLSTSB, FLSTSE, FLSTSE2, FLSTSI, FLSTSC, FLSTSCI, FLT, FLTC, FLTCU, FLTCUI, FLTC ULTRA, FLTR, FLTRI, FLTRSEI, FLTRU, FLTRUSE, FLTRX, FXB, FXCW, FXCWC, FXD, FXDB, FXDBI, FXDC, FXDCI, FXDI, FXDI35, FXDF, FXDFSE, FXDFSE2, FXDG, FXDL, FXDLI, FXDS-CON, FXDSE, FXDSE2, FXDWG, FXDWG2, FXDWG3, FXDWGI, FXDX, FXDXI, FXDXT, FXE, FXEF, FX, FXLR, FXR, FXR2, FXR3, FXR4, FXRC, FXRDG, FXRS, FXRSE, FXRS-SP, FXRT, FXS, FXSB, FXST, FXSTI, FXSTB, FXSTBI, FXSTC, FXSTD, FXSTDI, FXSTDSEI, FXSTS, FXSTSB, FXSTSI, FXSTSSE, FXSTSSE2, FXSTSSE3, FXWG, K, KH, WL, WLA, XL, XL 883, XL 883C, XL 883L, XL 883N, XL 883R, XL 1200C, XL 1200CP, XL 1200L, XL 1200N, XL 1200R, XL 1200S, XL1200X, XLCH, XLCR, XLH, XLH 883, XLH 883C, XLH 883 HUGGER, XLH 1100, XLH 1200, XL 50, XLR, XLS, XLT, XR, XR1200, XR1200X, M2, X1, S1, S2, S2T, S3, S3T, FIREBOLT XB9R, LIGHTNING, LIGHTNING CITY X, XB9S, XB9SX, XB12CG, XB12R, XB12S, XB12SS, XB12X, 1125R, XB12XT, 1125CR, VRSC, VRSCA, VRSCAW, VRSCB, VRSCD, VRSCDX, VRSCF, VRSCR, VRSCSE, VRSCSE2, VRSCX AND BLAST. iPad™, iPhone®, iPhoto®, iPod®, iPod classic®, iPod nano®, iPod shuffle®, iPod touch®, MacBook®, MacBook Air® and PowerBook® are registered trademarks of Apple Inc.

PRINTED IN THE U.S.A. 9901-1137 FATBOOK UPDATEFATBOOK UPDATEFATBOOK UPDATEFATBOOK UPDATE

Documents

Dragspecialties 2011 Update