9
Ok this is a "possible solution", heres the instructions, follow exactly: 1. Download the iOS 4.1 ISPW from: Firmware - The iPhone Wiki 2. Use redsn0w 0.9.6B5 to put your 3G in PWNED DFU MODE 3. Open itunes and it will detect your device in Recovery Mode. 4. SHIFT + RESTORE and point it to the 4.1 ISPW you downloaded 5. Wait for itunes to restore and it will give you the ERROR 1015, but thats ok! 6. Open up tinyumbrella and hit "Exit Recovery" . Your phone should reboot and take you to the emergency screen. 7. Run redsn0w 0.9.6B5 and point the ISPW to the 4.1. 8. Click the "Install Cydia" and "Install Ipad baseband" checkbox, and follow the instructions to jailbreak "HOPEFULLY" this should fix your recovery issue and have a normal operating 3g again Fix iTunes Error 1015 Posted in iTunes Errors - 27 May 2012 - 11 comments How to Fix iTunes Error 1015 ? error 1015 occurred with users who are trying to downgrade, upgrade or restore, their firmware on their iPhone 4S, 4, 3gs – iPod Touch 3G, 4G – iPad 3, 2, 1 onany iOS 4.x or iOS 5.x. Absinthejailbreak Team will show an easy way to fix 1015 error by using two ways First way by using “RecBoot” , Second way by using “LibUSB”

Download the IOS 4.1 ISPW From

  • Upload
    maxo1

  • View
    4

  • Download
    2

Embed Size (px)

DESCRIPTION

Download the iOS 4.1 ISPW

Citation preview

Ok this is a "possible solution", heres the instructions, follow exactly:

1. Download the iOS 4.1 ISPW from:Firmware - The iPhone Wiki

2. Use redsn0w 0.9.6B5 to put your 3G in PWNED DFU MODE

3. Open itunes and it will detect your device in Recovery Mode.

4. SHIFT + RESTORE and point it to the 4.1 ISPW you downloaded

5. Wait for itunes to restore and it will give you the ERROR 1015, but thats ok!

6. Open up tinyumbrella and hit "Exit Recovery" . Your phone should reboot and take you to the emergency screen.

7. Run redsn0w 0.9.6B5 and point the ISPW to the 4.1.

8. Click the "Install Cydia" and "Install Ipad baseband" checkbox, and follow the instructions to jailbreak

"HOPEFULLY" this should fix your recovery issue and have a normal operating 3g againFix iTunes Error 1015Posted in iTunes Errors - 27 May 2012 - 11 comments

How to Fix iTunes Error 1015 ?error 1015 occurred with users who are trying todowngrade, upgrade or restore, their firmware on their iPhone 4S, 4, 3gs iPod Touch 3G, 4G iPad 3, 2, 1 onany iOS 4.x or iOS 5.x.

Absinthejailbreak Team will show an easy way to fix 1015 errorby using two ways First way by usingRecBoot, Second way by usingLibUSB

First Way:How to fix iTuneserror 1015(RecBoot):Step 1:Download and InstallRecBooton your computer.

DownloadRecBoot forMac DownloadRecBoot forWindows DownloadRecBoot forLinuxStep 2:Shut down iTunes if it is opened.

Step 3:Put your i-device into DFU mode (if you dont know follow the steps below)

Connect your iPhone with your PC then open iTunes

Hold down power button and home button both at the same time for 10seconds

After the 10 seconds release the power button and still pressing on the home button for another 10 seconds

Step 4:Now iTunes will inform you by the message below. Recovery Mode message

Step 5:OpenRecBootand click onExit Recovery mode.

Now you can restore customIPSW fileor downgrade the firmware without iTunes Error 1015.

SecondWay:How to fix iTunes error 1015 using (LibUSB):Step 1:Download and Install correct version (32 bit / 64 bit) of LibUSBhere.

Step 2:Downloadand RunError 1015 FixerTool .

Step 3:Run iTunes and when you get the error, click the button on the Error 1015 Fixer Tool which saysFix My Error

Thats it..

Possible Related Answers :

How To Fix iTunes Error 1604,1600, 1601, 1602 How To Fix iTunes Error 3194 How To Put Your iPhone Into DFU Mode Cant update to ios 5.1.1 iTunes error 3194 How To Fix Exploit Failed Error whileto jailbreak iphone 3GS then use CUSTOM made ipsw files see below this topic to download iOS 4 custom ipsw files for iPhone 3GS

How to use Ultrasn0w to Unlock your iPhone iOS 4 :

These are instructions on how to unlock the iPhone 3G and iPhone 3GS for use with any GSM cellphone carrier using UltraSn0w. This will work with the iOS 4.0 firmware.

Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 04.26.08, 05.11.07, 05.12.01, or 05.13.04 baseband(modem firmware).

1. Step One :Add this source to cydia : http://repo666.ultrasn0w.com/ and press the Add Source button.

2. 3. Once the source has been added press the large Return to Cydia button.4. __tmp_adfirstpost__

5. Go to Manage >>> Sources and Press to select repo666.ultrasn0w.com from the list of user entered sources.

6. 7. Download the ultrasn0w.com from the list of user entered sources

8. 9. Confirm and Install Ultrsn0w and then Reboot the device NOW your device will be unlocked and you will be able to use any SIM card with your iPhone.

http://www.dodownload.net/goto/http://appldnld.apple.com/iPhone4/061-7932.20100908.3fgt5/iPhone1,2_4.1_8B117_Restore.ipsw