Download - Install - Update AutoPIPE Vessel-33.01.00.11

7/24/2019 Download - Install - Update AutoPIPE Vessel-33.01.00.11

1/14

Download, Install, License, and Update AutoPIPE VesselV8i 33.01.00.11

Log onto the Bentley Web Site

Open internet explorer web sitehttp://selectservices.bentley.com/en-US/

1. Select Software Downloads

2.Log into web site.If you do not have a current log, in please contact your local Bentley site administrator whocan assist you with the correct information and permissions.
http://selectservices.bentley.com/en-US/http://selectservices.bentley.com/en-US/http://selectservices.bentley.com/en-US/


2/14

Download AutoPIPE Vessel

1.In the Search By: area, Select radio button next to Product, and select AutoPIPE Productsfrom drop down list

2.In the Filter By area, Files Posted within last, change from 6 months to ALL.

3.Press the Search button at the bottom of the web site

4.Select the version of AutoPIPE Vessel to download.Place a check in the box next to the name and confirm that any dependencies have alsobeen selected (Bentley IEG).

Note: The following screen shot may show different versions then currently available, but thesteps to download are the same. Select a version to download. If you do not see check boxnext to the applications, you do not have download rights. Contact Bentley BRC or youraccount manager to discuss your options.

Note: Far right column notifies you of the OS for which the application is certified on. Installingthe application on any other OS will be at your own risk and will not be supported

5.Scroll to the bottom of the web page, press Continue button located in the bottom rightcorner.

6.Select Delivery method, Default Download, you can chose Download or Burn CD (an officialCD will be mailed).Press Continue button


3/14

7.Download ProcedureRead the Legal Terms of Use statement. If you agree, press the Accept button. Thenpress the Advanced Download Manager button. Provide pathname to download the fileto and finally press the Start Download button.

Note: Sometimes users are unable to download software from Bentley SELECTserviceswebsite by clicking on the link Download. Here are the steps which should help:

1. Turn off a pop-up blocker in Internet Explorer by going to Tools -> Pop-up Blocker ->Turn Off Pop-up Blocker

2. Addwww.bentley.comto Trusted Sites in IE by going to Tools -> Internet Options ->Security -> Trusted Sites -> Sites

3. Change a security level for this webpage to Low in IE by going to Tools -> InternetOptions -> Security -> Trusted Sites -> Custom level and change drop down list toLow.

8.Burn CD ProcedureSelect the Continue button, provide shipping information, and press the Completebutton.

Other applications required to complete an installation:

1.Select Server V8 XM

2.Bentley IEG (only required for XM licensed applications that do not support trust licensing)
http://www.bentley.com/http://www.bentley.com/http://www.bentley.com/http://www.bentley.com/


4/14

Download AutoPIPE Vessel Updates

AutoPIPE Vessel updates are created as needed. Notification of these updates are included in aBentley Press release or Newsletter which is sent to those who have signed up to receive SelectNewstream for Plant products.

To subscribe / unsubscribe to Newstreams,1. Visithttps://login.bentley.com/personalinfo/index.cfm

2. Log onto the web site.

3. Click on Tell us more about you, link near the bottom of the page.

4. Select the Newsletters Tab at the top of the page

Place a check in the box next to NewsStream for Plant, NewsStream for Building andPress Releases

5. Press Submit button.
https://login.bentley.com/personalinfo/index.cfmhttps://login.bentley.com/personalinfo/index.cfmhttps://login.bentley.com/personalinfo/index.cfm


5/14

Otherwise, it is the end users responsibility to periodically check the following location forproduct updates

Use the instructions above to log on the Bentley web site and navigate to the Support Download webpage.

1.In the Search By area, Select radio button next to Product, and select AutoPIPE Products from drop down list

2.In the Filter Bysection, change "Download Category" to "Enhancements and Updates", andFiles Posted within last to ALL

3.Press the Search button at the bottom of the web site

4.Place a check in the box next to the name and confirm that any dependencies have also beenselected.

5.Press Continue button

6.Select Delivery method, Default Download, you can chose Down load or Burn CD (an officialCD will be mailed).Press Continue button

7.Download ProcedureRead the Legal Terms of Use statement. If you agree, press the Accept button. Thenpress the Advanced Download Manager button. Provide pathname to download the fileto and finally press the Start Download button.

8.Burn CD ProcedureSelect the Continue button, provide shipping information, and press the Complete button.


6/14

Install AutoPIPE Vessel V8i 9.3.x.x

Note:For those installing the application on Win 7 please see item #4 in this section below beforecontinuing,

1. This procedure assumes that Select Server XM has been install and configured, If not pleasecontact the license group to assist you.

2. Must log onto users computer with fullAdminist rat ion r ights.

3. Install AutoPIPE Vessel V8i while accepting all the default settings.

a. Prefer that the application is not installed over a network connection; suggest that theEXE file is on the users system before starting the installation.

NOTE: If you have already installed AutoPIPE Vessel, completely uninstall all previous versionsbefore proceeding.

b. Navigate to the EXE file download using the procedure above.

c. Double click on it to start the installation process.


7/14


8/14

If not already installed:

Ultimately the following is displayed:

d. Finished, with AutoPIPE Vessel install, continue with next section before starting theapplication.


9/14

Install AutoPIPE Vessel updates

If updates were available, install AutoPIPE Vessel updates using the procedure located in theupdate files. Please continue with next section before starting the application.

a. After installation, the computer should be rebooted.

Set-up License

There are two methods for License activation: automatically with the Product Activation Wizard, ormanually using License Management Tool.

Method #1: Automatically with the Product Activation Wizard

The following screen is automatically displayed after AutoPIPE Vessel is installed:

a. Choose the correct Setting and press Next

b. Enter the correct Site Activation Key and press the Test Connectionbutton, the Severand Activation key should be verified, before continuing.


10/14

c. Select a country and Press the Nextbutton

d. Verify the settings are correct and press the Finish Button:

e. If all they settings were correct the following is displayed:


11/14

Method #2: Manually using License Management Tool (LMT)

a. The following screen is automatically displayed after AutoPIPE Vessel is installed:

Press the Cancelbutton.

b. Open License Management Tool:

Select the Start Button> Program> Bentley Engineering> AutoPIPE Vessel > LicenseManagement Tool.

c. After the application is opened, select Tools> Options> enter the correct Server Name and

Site Activation Key, then press the Test Connectionbutton, the Sever and Activationkey should be verified, before continuing.


12/14

d. Verify AutoPIPE Vessel is listed and 1 license is available.


13/14

Start the Program - AutoPIPE Vessel

Start the program by selecting the desktop Icon:

OR,

Select the Start Button> Program> Bentley Engineering> AutoPIPE Vessel > AutoPIPEVessel.

If everything was correctly installed and licensed the following should be displayed, select avalid license option and press OKbutton to use the program:


14/14

Contact Bentley License Team

If your application is not licensed correctly due to License Management Tool issues, pleasecontact the Bentley License department to verify your account status.

US - (800) 778-4277, opt 1, opt 2

Europe, Middle East, and Africa

(+31) 023 5560555

Asia-Pacific+61 3 9697 8637

Troubleshooting:

1. If revert to demo,

a. Verify license is correctly displayed in LMT.Note, in LMT press F5 to refresh the listing.

b. Verify the internet connection and server connection.

c. Verify Select Server XM Dashboard Settings (i.e. Application restrictions, userrestrictions, etc...)http://selectserver.bentley.com/bss/admin/

2. The following is displayed:

Answer:The program is in Demo Mode, correctly license the application as described above.
http://selectserver.bentley.com/bss/admin/http://selectserver.bentley.com/bss/admin/http://selectserver.bentley.com/bss/admin/http://selectserver.bentley.com/bss/admin/

Documents

Download - Install - Update AutoPIPE Vessel-33.01.00.11