Quick Installation InstructionsConnection Diagram

Download “Smart Life” App. 1. Scan the QR code with your phone and click “Download”.

2. After completing the installation, click “Registert” to start creating an account. ( Please save your account and password properly ! )

Wi-Fi connection

1. After power-on, make sure the switch is in OFF mode and the “green light” is in the fast flashing (2 times/sec) state . Note: 1 . When the wifi is connecting, green light is always on . 2 . If the green light is in slow flash ( 3 sec/time ) or no flash, please press the button for 20 seconds to reset .

2. Connect your phone to 2.4G Wi-Fi network, then login account on “Smart Life” app.

3. Click “+” in the top right corner

4. Click “Switch”

Activate motion sensoring (only for SS118-01K2 model switch)

1. After Wi-Fi is connected, turn the dial from OFF mode to Auto mode for 2 seconds. ( If the light is dim, the load device will open )

2. Then dial the button from Auto mode to LED mode for 2 seconds. ( If the light is dim, the yellow night light will open)

3. Finally, dial the button from LED mode to Auto mode, and the activation is completed.

Contact us If you have any questions about the installation or wifi connection or others, please contact our Eoce Support Team to get a quick solution.

Email: eoce_service@outlook.com WeChat: eoce_service Amazon Brand Store: https://www.amazon.com/eoce Official Website: http://www.yij-eoce.com

5. Click “Confirm indicator rapidly blink”

6. Enter the account and password of your 2.4G wifi network, then click “OK”

7. Waiting for connection (about 10-20 seconds to complete the connection)

8. Name the switch and click “Completed” Now that the switch has been connected successfully, you can control your switch through the phone. Also the timer, device sharing, voice control and other functions can be used. (How to connect the voice device, please refer to page 11-19 of the main manual)