Upload
harshadrathod
View
131
Download
6
Embed Size (px)
DESCRIPTION
Mantra MFS100 Installation Guide
Citation preview
Download and configure MFS100 Device.
Open http://ipds.gujarat.gov.in site in Internet Explorer.
Please Note That Always opens your Internet Explore with Administrator privileges.
Just go to Start Menu find Internet Explorer and Right click on Internet Explorer and Select Run as
administrator.
See below screen.
Click on Download(Drivers). Then click on (4) Mantra MFS 100 Driver & DLL.
You can see below screen. Then click on save. Save it in appropriate path.
Click on Open Folder.
You can see above screen. Right click on mantra_mfs_100.rar and click on Extract to
mantra_mfs_100\.
You can see mantra_mfs_100 folder.
Open folder then click op step 0 and open it.
Click on setup.exe and open it.
Right Click on Setup.exe and Click on Run as Administrator.
After Click on Open You can see above Window.
Click on next button.
Click on Everyone and then click on Next.
Click on next.
Click on Continue Anyway
OR
Click on Register Success
OR
Message of Register Success should be in minimize mode. So please check as per below picture.
If this setup will ask for administrator and if it is necessary for administrator user and password, then
please provide it administrator user and password.
Installation complete will get ready to access finger print device on your computer.
Click on close.
During the installation if you are not getting the message of Register Success then Please go to
folder Of C:\Program Files\Mantra\MFS or C:\Program Files (x86)\Mantra\MFS Right click on
InstallActiveX.bat and click on Run as administrator. If no option for Run as administrator then click
on open. See below picture.
After click on open you can see above Window.
Click on Ok. If there is no message for Registered Success then its not completed the setup. So
please run this file again with administrator Rights.
Now check the driver installation document and conform that Device is
Configure or Not.
Now go on http://ipds.gujarat.gov.in then click on Download(S/w) and click on Auto Install Mantra
capture Device.
Then see the page. If the page display like beloved screen.
If you can see this screen then follow the below steps.
Go on Tools menu in Internet explorer.
Then click on Internet Options.
Click on Security Tab and click on Trusted Sites.
And click on Sites. unchecked Require server verification check box.
Type the site http://ipds.gujarat.gov.in then Click on add button.
After it once add http://pds.gujarat.gov.in then Click on add button. Then click on close and click
apply button. Then click on Advance Tab .
Then check allow active content to run in files on my computer*.
Check Allow software to run or install even if the signature is invalid. (Please conform that both
check box is checked or not). Then click apply and ok.
Close Internet Explorer and re run Internet Explorer and open the site and check the Mantra Page if
it is see like below screen then your MFS 100 Device is configure but Device is not connected to
computer. Please check it.
Pl. Plug Your scanner And check its plug properly and then close your internet explorer and start
again same site and then your scanner with your finger print.