12

DONDI - Storage Made Easy · A = 5.0 Ft B = 1.0 Ft C = 3.3 Ft S = 32 degrees. LANDINI GLOBALFARM 100 & DONDI DBR.75/32. LANDINI GLOBALFARM 100 & DONDI DBR.75/32. For more information

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

  • DONDI ROTARY DITCHERSAgriculture machinery market leader for 40 years

    • Established in 1850 in Italy

    • Over 150 years of experience in agriculture implements

    • Undisputed leader in ditchers and drainage machinery• Undisputed leader in ditchers and drainage machinery

    • DONDI’s line of ditchers is registered with the International Trademark

    • DONDI is the world benchmark of ditching technology

    • Palm Mach Sdn Bhd is the sole distributor of Dondi Ditchers in Malaysia and IndonesiaPalm Mach Sdn Bhd is the sole distributor of Dondi Ditchers in Malaysia and Indonesia

  • ROTARY DITCHERS

    • MAINLY USED FOR :‐

    • DIG AND MAINTAIN RAINWATER AND PEAT DRAINAGE DITCHES FOR WATER IRRIGATION

    • CLEAN AND MAINTAIN DRAINAGE ALONG PLANTATION ROADS TO AVOID FLOODING

  • REQUIREMENTS

    • 75 to 85 tractor PTO HorsepowerHow do you calculate tractor PTO Horsepower?a) 75% of Tractor Hpb) DIN H i G i t t t d d d t th i ' fl h lb) DIN Hp is a German engine test standard measured at the engine's flywheel. 

    aka. PS.

    • Creeper gear• Creeper gearWhat is a Creeper gear?a) LOWEST gear in tractor gear range with very HIGH torque. This is in order for the PTO shaft to spin at a desired rated RPMthe PTO shaft to spin at a desired rated RPM.

    • PTO Speed 540 RPMAll DONDI rotary ditchersmust work at a minimum PTO Speed of 540 RPMAll DONDI rotary ditchers must work at a minimum PTO Speed of 540 RPM.

  • REQUIREMENTS

    h k ( )• Three‐Point Linkage (Category 2)Most large Hp tractors (80 and above) are fitted with a 3‐Point Linkage which is suitable for large implements. Please check your tractor’s linkage category.

    • Heavy front weights (maximum ballast)To ensure safety, please ensure your tractor is operating with the manufacturer’s specification front weights to provide maximum ballastmanufacturer s specification front weights to provide maximum ballast.NO FRONT WEIGHTS, NO DITCHER!

    • Double Tyre and Wide TrackDouble Tyre and Wide TrackDue to the top cut width of the DONDI Ditcher, we recommend using double tyres or widen track on your tractor as much as possible to improve stability and safety.safety.

    • Dedicated single spool valve for ditcher tilting (angle).

  • DOUBLE WHEEL ROTARY DITCHER MODELS

    Over 15 years in Malaysia, Palm Mach Sdn Bhd has sold 2 popular models of DONDI Ditchers to many local plantation companies. These 2 models are best suited for Malaysian and Indonesia plantationsMalaysian and Indonesia plantations. 

    DONDI DBR 75 / 32DONDI DBR.65 R / 32

    DONDI DBR.75 / 32

  • Horsepower :  70 ‐ 75

    Speeds :Digging new ditch  0.4 to 0.6 km/h

    DONDI DBR.65 R / 32 SPECIFICATION

    Maintenance  1.2 to 1.4 km/h

    Tractor PTO RPM : 540 

    Weight : 830 kg

    A = 4.5 Ft

    B = 1.0 Ft

    C = 2.8 Ft

    S = 32 degrees

  • Horsepower :  75 ‐ 85

    Speeds :Digging new ditch  0.4 to 0.6 km/h

    DONDI DBR.75 / 32 SPECIFICATION

    Maintenance  1.2 to 1.4 km/h

    Tractor PTO RPM : 540 

    Weight : 970 kg

    A = 5.0 Ft

    B = 1.0 Ft

    C = 3.3 Ft

    S = 32 degrees

  • LANDINI GLOBALFARM 100 & DONDI DBR.75/32

  • LANDINI GLOBALFARM 100 & DONDI DBR.75/32

  • For more information on Dondi Ditchers :-

    Palm Mach Sdn Bhd3A Jalan Perindustrian Desa Aman 1AIndustri Desa Aman52200 K l L52200 Kuala LumpurTel :+603 6272 2439Fax :+603 6272 2461Email : info@palmmach comEmail : [email protected]