Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Copyright c 2007 Dogtra Company
22912 Lockness AvenueTorrance, CA 90501U.S.A.
telephone (310) 534 - 0101fax (310) 534 - 9111toll free 1-888-811-9111
REMOTE CONTROLLED DOG TRAINING COLLARS
OWNER’S MANUAL
www.dogtra.com2007-
MAIN FEATURES
PRODUCT SAFETY AND HEALTHSTATEMENTS
PACKAGE CONTENTS
DESCRIPTION OF TRANSMITTERPARTS
BUTTON FUNCTION
DESCRIPTION OF COLLAR/RECEIVERPARTS
BATTERY CHARGER
TESTING YOUR COLLAR
FITTING THE COLLAR ON THE DOG
CHARGING THE BATTERIES
METAL BELT CLIP ACCESSORY
BASIC MAINTENANCE
TROUBLE SHOOTING GUIDE
WARRANTY AND REPAIRINFORMATION
2
3
4
5
13
17
21
22
24
26
29
31
32
35
1
CONTENTS
2
Easy-to-use, ergonomic transmitter.
Rheostat dial allows for gradual increases instimulation intensity with no jumps betweenlevels (0-127).
Two-dog models allow the trainer to control twodifferent dogs from one transmitter without thehassle of handling unnecessary parts.
has a 1/2-milerange.
Stimulation type - Nick , Constant and non-stimulating pager/vibration.
Rechargeable, user-replaceable Ni-MH batteries
Fully Waterproof collar/receiver and transmitter.
No external antenna on the collar/receiver.
One-charger system allows the transmitter andreceiver(s) to be charged at the same time.
Over 999 different identity codes to preventsignal match-up with other e-collars.
Easily visible blue LCD screen displays exactlevel of stimulation and can be seen in the dark orlow light conditions.
Three bar battery life indicator and LED coloredindicator to show remaining battery life.
MAIN FEATURES
MAIN FEATURES
3
PRODUCT SAFETY AND HEALTH STATEMENTS
Proper e-collar useDogtra e-collars are intended for the sole purpose
of behavior modification of dogs. They are notintended for human use or use on other animals.Dogtra Company does not assume any liability forimproper use of the Dogtra e-collar.
Aggressive dogsDogtra does not recommend using the e-collar to
correct dogs that are aggressive towards other dogs orpeople. In many such cases the dog will associate thestimulation with the other dog or individual andbecome even more aggressive. Dog aggression is besttreated by a dog-training specialist.
Interference with other electronic devicesDogtra’s industry-leading technology filtering
system ensures minimal interference with otherelectronic devices (garage door openers, pacemakers,etc.). Our digital microprocessor offers thousands ofunique codes to eliminate frequency match-up withother Dogtra e-collars.
Inadvertent activationIf the constant button is held down for 12 seconds
or more the unit will automatically shut down. It willreactivate when the button is released.
PRODUCT SAFETY AND HEALTH STATEMENTS
Transmitter
Receiver (two collar receivers for two-dog models)
Battery charger and splitter cable
Metal belt clip Accessory
Owner’s manual
COLLARPACKAGE CONTENTS
4
PACKAGE CONTENTS
5
DESCRIPTION OF TRANSMITTER PARTS
DESCRIPTION OF TRANSMITTER PARTS
transmitter (1-dog)
Antenna
Battery ChargingReceptacle &Rubber Plug
PagerButton
ON/OFFSwitch
LCDScreen
RheostatIntensity Dial
Indicator Light(LED Window)
“Nick” Button
“Constant” Button
6
DESCRIPTION OF TRANSMITTER PARTS
DESCRIPTION OF TRANSMITTER PARTS
transmitter (2-dog)
Antenna
Nick/Cont.Toggle Switch
Battery ChargingReceptacle &Rubber Plug
1st-dogPager(Gray Button)
2nd-dogPager(Orange Button)
ON/OFFSwitch
LCD Screen
RheostatIntensity Dial
Indicator Light(LED Window)
1st-dogNick & Cont.(Gray Button)
2nd-dogNick & Cont.
(Orange Button)
7
DESCRIPTION OF TRANSMITTER PARTS
Transmitter Antenna
A short 2 antenna is supplied with the transmitter.
The antenna must be fastened to thetransmitter before using the unit.
2 Antenna
8
DESCRIPTION OF TRANSMITTER PARTS
Rheostat Intensity Dial
The Rheostat Intensity Dial is located on thetop of the transmitter: (0) being the lowest leveland (127) being the highest. The LCD screenshows the intensity level during operation.
9
DESCRIPTION OF TRANSMITTER PARTS
LCD Screen
The LCD screen indicates the stimulationlevel (0-127) on the screen.
The LCD battery life indicator shows 3 barsat full charge, 2 bars at medium charge and 1 barwhen it needs to be charged. The battery lifeindicator only specifies the remaining charge foryour transmitter. To find the remaining chargefor your receiver, observe the LED on thecollar/receiver. When it emits a: (Green color =fully charged, Amber color = medium charge,Red color= needs charge).
10
DESCRIPTION OF TRANSMITTER PARTS
Care for LCD Transmitters in ColdTemperature
In cold temperatures (10 degrees F orbelow), the Liquid Crystal Display (LCD) onyour transmitter may be dim or slow to respond.Wait until the display becomes visible beforeselecting any training level.
Even though the LCD screen might be dim orslow to respond, when you push the Nick orConstant button, the transmitter will still functionproperly. In the occurrence of extremely coldweather, the LCD screen might take a moment torespond causing the Intensity level to freeze atthat current level. In this situation, if you turn theRheostat Intensity Dial, and the intensity level onthe screen does not increase, yet you emit anelectrical stimulation, the level will be inagreement with the new changed intensity level.
In this situation, it is ideal to either wait untilyour transmitter is back to working order beforeemitting a correction, or while holding theconstant button down slowly turn the RheostatIntensity Dial while watching your dog’sreaction. Do not turn the Rheostat Intensity Dialat a rapid increase because the collar/receiverwill emit a static correction based on the level ofthe Rheostat Intensity Dial, which might not becorrectly reflected on the LCD screen.
11
DESCRIPTION OF TRANSMITTER PARTS
Transmitter Indicator Light (LED Window)
The transmitter LED indicator light islocated near the Rheostat Intensity Dial. It willflash every 4 seconds when the transmitter hasbeen turned on. The color of the light indicatesthe status of battery life. It flashes green whenthe battery is fully charged and turns to amberwhen the battery is at medium charge. It isacceptable to charge your unit even at mediumcharge without any damage incurred to yourcollar. When the transmitter indicator emits ablinking red light, the battery needs to berecharged.
(Green = full charge, Amber = mediumcharge, Red = needs charge).
12
DESCRIPTION OF TRANSMITTER PARTS
Transmitter Battery Charging Receptacle &Rubber Plug
Located on the backside of the transmitter,the charging receptacle is covered by a rubberplug. Insert one end of the battery charging cableinto the receptacle to charge the battery (SeeBattery Charging Procedure on page27).
After charging is completed, close thereceptacle with its rubber plug to make sure dirtor water does not get inside.
13
DESCRIPTION OF TRANSMITTER PARTS
The transmitter for the single dog unit has four buttons (one on theface of the transmitter, two on the left side andone on the right side).
BUTTON FUNCTION
Nick
Pager
ON/OFFSwitch
Constant
(1-dog)
“Nick” Button
The “Nick” button is located on the top left.It is imprinted with the letter “N” for an easy,clear selection. When the “Nick” button ispushed the receiver emits a single, rapid pulse ofelectrical stimulation.
14
DESCRIPTION OF TRANSMITTER PARTS
“Constant” Button
The “Constant” button is located on thebottom left. Pressing the “Constant” button givescontinuous stimulation as long as the button ispushed, for up to 12 seconds. If the button is notreleased after 12 seconds, the stimulation willautomatically turn off as a safety feature. Thecollar will be ready to be reactivated once thebutton has been released.
“Pager” Button
The pager button is located on the face of thetransmitter. Pressing it will give non-stimulatingvibration as long as the button is depressed, forup to 12 seconds.
Transmitter Power ON/OFF
The button on the right side of the transmitteris the “ON/OFF” button that activates thetransmitter and LCD screen only.
To turn the transmitter on, press the“ON/OFF” button on the right side until theLCD screen illuminates.
To turn the transmitter off, press the“ON/OFF” button on the right side of thetransmitter. When the LCD screen displays“OFF” release the button.
“Nick” & “Constant” Toggle Switch
Located on the face of the transmitter is atoggle switch. The toggle switch has
a setting for “Nick” and another forConstant . The color-coordinated buttons
(orange for the orange receiver/collar and grayfor the black receiver/collar) will implementthe desired stimulation based on the toggleswitch setting.
15
DESCRIPTION OF TRANSMITTER PARTS
The two-dogunit has five buttons and a toggle switch on thetransmitter.
Two on the face of the transmitter, two onthe left side, and one on the right side.
(2-dog)
Nick/Cont.Toggle Switch
1st-dogPager(Gray Button)
2nd-dogPager(Orange Button)
ON/OFFSwitch
1st-dogNick & Cont.(Gray Button)
2nd-dogNick & Cont.
(Orange Button)
16
DESCRIPTION OF TRANSMITTER PARTS
When either the orange or gray stimulationbutton is pressed and the toggle is set on “Nick”the receiver emits a single, rapid pulse ofelectrical stimulation.
When you press either the orange or graystimulation button, and the toggle is set on“Constant”, the receiver emits a continuousstimulation as long as the button is pushed, forup to 12 seconds to the corresponding collar. Ifthe button is not released after 12 seconds, thestimulation will automatically turn off as asafety feature. The collar will be ready to bereactivated once the button has been released.
“Pager” Button
The pager buttons are located on the face ofthe transmitter. The orange button correspondswith the orange receiver/collar and the gray withthe black receiver/collar. Pressing it will givenon-stimulating vibration as long as the buttonis depressed, for up to 12 seconds.
17
DESCRIPTION OF COLLAR / RECEIVER PARTS
DESCRIPTION OF COLLAR / RECEIVER PARTS
On/Off Magnetic Red Dot
Contact Points
Indicator Light(LED Window)
Battery ChargingReceptacle and Cover
Collar strap
18
DESCRIPTION OF COLLAR / RECEIVER PARTS
Receiver ON/OFF Magnetic Red Dot
To activate the receiver/collar, place the reddot on the back of the transmitter to the red doton the collar/receiver. Hold the two red dotstogether for a moment until the LED light on thereceiver/collar comes on.
To deactivate the unit, repeat the sameprocedure holding the two red dots togethermomentarily. The LED light will turn red for abrief moment indicating that the collar/receiveris now shut off.
Receiver Indicator Light (LED window)
Located on the front of the receiver/collar,the indicator light comes on and blinks onceevery 2 seconds after the collar has been turnedon. The color of the LED indicates the batterylife of the receiver.
(Green = full charge, Amber = mediumcharge, Red = needs charge)
When the “Constant” button on thetransmitter is pushed, the collar indicator lightwill glow steadily (either green, amber, or redbased on the remaining battery life), as long asyou hold the button down, for up to 12 seconds.
When the “Nick” button is pushed, the lightcomes on for a fraction of a second.
Indicator Light (LED Window)
19
DESCRIPTION OF COLLAR / RECEIVER PARTS
20
DESCRIPTION OF COLLAR / RECEIVER PARTS
Receiver Battery Charging Receptacle &Rubber Plug
On the inside of the collar receiver, next tothe collar strap, is a battery-charging receptaclewith a rubber plug.
Internal Antenna
All Dogtra E-collars have non-exposedantennas that are located inside thecollar/receiver.
Battery ChargingReceptacle & Rubber Plug
21
DESCRIPTION OF BATTERY CHARGER
The battery charger and charging cablesallow you to charge both the transmitter andreceiver at the same time. The battery charger isdesigned for a 120-volt wall outlet. (European230-volt AC chargers and 12-volt field chargerfor your automobile are also available.)
To use the battery charger for the two-dogunit, combine both sets of battery charging(splitter) cables as shown. This enables you tocharge the transmitter and both receivers at thesame time.
BATTERY CHARGER
Charging Cable
120 voltCharger
Wall OutletTwo-dog unit only
22
TESTING
1. To activate yourplace the red dot on the back of thetransmitter to the red dot on thecollar/receiver. Hold the two red dotstogether for a moment until the greencolored LED indicator light comes on. Theindicator light will blink every two secondsshowing the unit is charged and ready touse. (If the indicator light emits a red color,the batteries need to be charged.)
TESTING YOURCOLLARS
23
TESTING
2. Turn the intensity level on the transmitter up tothe maximum level (127) and press the Nickbutton. The indicator light(LED) on the collarreceiver will light briefly as you push thebutton. Pressing the Constant button will lightthe indicator for as long as you hold the buttondown, up to twelve seconds.
3. As a safety feature, the dogtra 280NCPPlatinum Series will automatically shut offstimulation if the Constant button is depressedfor twelve seconds or longer. The button willbe ready to be reactivated once the button isreleased.
24
FITTING THE COLLAR ON THE DOG
FITTING THE COLLAR ON THE DOG
The collar should be fitted so that theSurgical Stainless Steel contact points pressfirmly against the dog’s skin. You should beable to fit a finger in between the contact pointand your dog’s skin.
A loose fit can allow the collar to movearound on the dog’s neck. When this happens,the contact points may rub the skin and causeirritation. If the collar is too loose, electricalcontact will be inconsistent and yourcorrections will be inconsistent also.
Dogtra uses Surgical Stainless Steel contactpoints and Anti-microbial plastic to protect thedog’s skin.
25
FITTING THE COLLAR ON THE DOG
ATTENTION!Avoid having the dog wear the collar for
more than 8 hours out of every 24-hour period.Leaving the points on the same spot forextended periods of time can cause skinirritation. If the dog is to wear the e-collar forlong periods, occasionally reposition the collarso that the contact points are moved to adifferent spot on the dog’s neck.
INTENSITY SELECTIONThe
has a Rheostat Intensity Dial on the top of thetransmitter. (0 is the lowest and 127 is thehighest). Remember that you will need to adjustthe setting (upward or downward) depending onyour dog’s temperament and threshold forstimulation. Also, as the dog’s attitude changes,especially during times of increased excitementor distraction, you might need to adjust theintensity level.
NOTE : The stimulation intensity can beadjusted even while the stimulation is inuse.
uses Ni-MH(Nickel-Metal-Hydride) batteries.
1. Charge the unit before using the unit for thefirst time.
2. Do not charge the batteries near anyflammable substances.
3. Fully charge the batteries for 14 hours if theunit is to be stored without use for a period of3 months or more.
Recharge the unit if: The indicator light on the collar is emitting ared color.If the 3 bar indicator on the transmitter LCDshows just 1 bar. The indicator light on the transmitter or
CHARGING THE BATTERIES
26
CHARGING THE BATTERIES
Battery Charging Procedure
1. Attach the charging cables to both thetransmitter and receiver(s), as shown onpage 26
2. Plug the charger into a 120-volt wall outletor, if using the accessory field charger, pluginto a cigarette lighter. (Use a 230-voltEuropean charger for Europe.) Whenproperly plugged in, all indicator lightsshould glow red. The receiver automatically turns off whenyou insert the charging cable into the battery-charging receptacle on the receiver.
3. After charging, cover the battery chargingreceptacles with the rubber plugs on thetransmitter and receiver.
4. The battery is fully charged with a 14-hourcharge. The lights will stay red during thecharging process. They DO NOT turn greenwhen fully charged. Charging the batteriesfor more than 14 hours at one time will notextend battery life.
27
CHARGING THE BATTERIES
receiver will not come on.The indicator light on the transmitter orreceiver comes on momentarily, but will notstay on when the “Constant” button is pushed.
Reception
The collar has a range of 1/2-mile. Depending on theway you use your transmitter, the transmitterrange may vary.
Hold the transmitter away from your bodyand avoid touching the antenna, to get thegreatest range.
For maximum signal strength, keep your unitproperly charged.
Maximum Range
Typical Range
Minimum Range
28
RECEPTION / ACCESSORIES
METAL BELT CLIP ACCESSORY
29
METAL BELT CLIP ACCESSORY
To attach the metal belt clip to your transmitter,follow the steps below.
The final result should look like step 2.
30
ACCESSORIES
The following items may be purchasedseparately by calling our customer service at(888) 811-9111. You may also browse theselection at www.dogtra.com.
European ChargerDesigned for use with 230V AC electrical
outlets in Europe.
Field Auto Charger Designed for use with the 12-volt cigarette
lighter in your car.
ACCESSORIES BASIC MAINTENANCE
31
BASIC MAINTENANCE
Be sure that the rubber charging plugs arealways secured when the collar is in use. If yourplugs break or are ripped, please contactCustomer Service at [email protected] or(888) 811-9111 to obtain replacements.
After each session, carefully inspect yourunit for any missing parts, or casing damage.Broken casings on either the receiver ortransmitter may affect the waterproof guaranteeof the unit. The transmitter antenna should besecured and tight for optimum performance.Rinse the unit after each session and clean offany dirt or debris.
Storage MaintenanceYour unit should be fully charged for 14
hours before extended storage. During storage,the unit should be charged every 3 months for14 hours, and once before the first use.
When traveling, try to store your units inroom or slightly warmer temperatures, do nottransport the unit exposed in extreme climates.
Troubleshooting:If you suspect your unit is malfunctioning
please refer to the “Troubleshooting Guide”before you send your unit in for service.
If you have any questions or concerns, youmay direct your inquiries to [email protected] orcall (888) 811-9111.
32
TROUBLESHOOTING GUIDE
1. My dog is not reacting to the collar.- Make sure the receiver is turned on. Place
the two red dots together to activate thereceiver. Push the blue button on thetransmitter until it illuminates to activate thetransmitter.
- Be sure the collar strap is tight enough soboth contact points are touching the dog’sskin.
- The contact points may be too short for thedog. To place an order for longer contactsappropriate for your dog, please call(888) 811-9111. If you are already using the longest contactpoint available, you might need to trimdown the hair on the dog’s neck so bothcontact points are touching the dog’s skin.
- The intensity level may be too low for yourdog. Keep increasing the stimulation untilthe dog responds usually by neckmovement, head shaking, looking over hisshoulder, etc. (response may be very subtleso pay attention.)
TROUBLESHOOTING GUIDE
33
TROUBLESHOOTING GUIDE
2. The LED indicator light comes on, but I donot feel any stimulation.- Your tolerance may be higher than your
dogs, or your skin very thick, so you mayneed to try the unit on your fingertips wheresensitivity is higher. Be sure both contactpoints are touching your fingertips.
- The battery may be low, check the LEDlight for battery life.
- If you have a full charge, and you have doneall of the above, your unit may need to beserviced. Please contact Customer Serviceat [email protected] or (888) 811-9111.
3. The transmitter has no range, or stimulationis less when the dog is farther away.- The antenna(s) may be damaged. To order
parts please contact Customer Service at(888) 811-9111.
- The range indicated on the unit’s box is forflat terrain. Heavy brush, trees, hills ormoisture will affect the range of your unit.For best range, hold the transmittervertically above your head. Try also movingto higher ground.
- Any electrical conductors will affect therange, such as cars, chain-link dog runs,metal buildings, radio towers. For bestresults, operate away from these structures.
34
TROUBLESHOOTING GUIDE
4. My collars are not holding a charge.- The batteries might not be charged properly, or
the charger, splitter and the charging port needsto be looked at. If you suspect yourcharger/splitter is not functioning properly pleasecontact Customer Service at [email protected] or(888) 811-9111. You can send in your chargingunits in to have us inspect them.
- The charging pin may be damaged. Inside thecharging port, there is a metal pin that should bestanding straight up and stiff. If the pin iswobbling, broken or missing, you will need tosend the unit in to the Repair’s Dept. Thecharging port must be clean prior to charging,clean the dirt out with a cotton swab and somerubbing alcohol. If the dog is in salt-water, besure to rinse the receiver and charging port withclean water.
- For Dogtra units over two years old frompurchase date, batteries may be replaced whenhaving battery problems. You can replace themyourself by ordering parts from Dogtra. Damagesincurred to the unit due to improper installationare not covered under any warranty. This is theonly time customers should open the unit, anyother unauthorized servicing or tampering of theunit voids your limited lifetime warranty. If afterbatteries are replaced, and you still are havingproblems with the unit, Dogtra stronglyrecommends sending the unit in for inspection.
35
WARRANTY AND REPAIR INFORMATION
LIMITED LIFETIME WARRANTY
(Applicable for units purchased after December31, 2005 that are registered within 30 days oforiginal purchase).
To quality for the Limited Lifetime Warranty: Product registration must be completed onlineat www.dogtra.com or via telephone at(888) 811-9111. For international customers,please call us at (310) 534-0101.
Dogtra’s Limited Lifetime Warrantyprovides:- 1-year warranty for batteries. - 1-year warranty for the Yapper Stopper No-
Bark collars. - 2-year warranty for parts and labor awarded
to the original retail purchaser of the e-collars.
Dogtra’s Limited Lifetime Warranty does notprovide its warranty if the product is notregistered within 30 days of purchase and/orif the product is resold. The warranty willbecome void and all repairs will be subject toapplicable labor fees. Dogtra does not
WARRANTY AND REPAIR INFORMATION
36
WARRANTY AND REPAIR INFORMATION
provide replacement on defective units orprovide refunds after 30 days from theoriginal date of purchase.
All parts are covered under the warranty forthe life of the product. After the two-yearwarranty has expired, the labor cost will bedetermined based on the model type, year,and the extent of repair.
The Limited Lifetime Warranty expires five-years from the date a unit is discontinued inproduction by Dogtra Company.
Warranty does not cover:- Misplaced or lost units.
Replacement costs of either thetransmitter or receiver is owner’sresponsibility.
- Water damage of models that are notwaterproof.
- Damage done by dog or owner, neglect, orimproper maintenance.
- Warranty will be voided if the unit(s) havebeen altered or had unauthorized service.
37
WARRANTY AND REPAIR INFORMATION
Procedure for Repair Work:
Shipping to Dogtra for warranty work is theowner’s responsibility. The cost for shipping (viaregular ground service) back to the customer iscovered by Dogtra Co. within the continentalUnited States. Any expedited shipping servicewill be at the owner’s expense. Dogtra is notresponsible for loss of training time orinconvenience while the unit is in our warehousefor repair work. Dogtra does not provide loanerunits or any form of compensation during therepair period.
A copy of the sales receipt showing purchasedate is required before warranty work is begun.
Write a note briefly explaining the problemand include your name, address, city/state/zipcode, daytime phone number and evening phonenumber. Or you can visit our web site atwww.dogtra.com to fill out a Service RequestForm. If repair costs are not covered underwarranty, we will call you for credit cardinformation once the work has been completed.For any questions concerning your Dogtra
38
WARRANTY AND REPAIR INFORMATION
products call us Toll Free at 1-888-811-9111.Our operating hours are between 8:30am-4:00pmPacific Standard Time.
Send repair units to:
22912 Lockness AvenueTorrance, CA 90501U.S.A.