DMIC Ball Valves - Valves and Fittings Of Houston, Inc.valvesandfittingsofhouston.com/pdf/DMIC/Full Ball Valves Catalog.pdf · BV3H 3-Way Steel Selector Ball Valves, 6000 PSI

Ball Valves

DMIC Ball Valves Catalog DBV-0101E Call Toll Free 1-800-248-3642Copyright © 2001 Delaware Mfg. Page 2 In Canada 1-800-320-3642

DMIC Ball ValvesExpanding and Refining the Benchmark of Quality inLow, Medium, and High Pressure Ball ValvesDue to our policy of continual product improvement, the specifications in this catalogmay change without notice. When designing by spec, please request a certified print.

The globalization of fluid power manufacturing in the new millennium gives Buyers in all sectors of industrymore sourcing choices, predominantly in the "low cost" arena. As new brands enter the marketplace andcurrency fluctuations turn bargains into liabilties, Buyers are prudent to insist on products that comply withinternational standards. DMIC Ball Valves are the preferred choice for OEMs and Designers who value qualitystandards-based products, assured supply availability, and stability of design. Every DMIC Ball Valve series hasbeen improved by our Engineers' attention to interoperability and commonality. Buyers can specify inch ormetric version DMIC valves that share common external dimensions, or flanged valves in their choice of UNC orMetric bolt threads. When your product is ready to incorporate ISO or metric connections, DMIC is there for youTODAY, and will be tomorrow, with dimensionally compatible products and the wide selection of layout tools,pre-engineered accessories and service parts that eliminate sourcing, redesign, and warranty headaches.

Low Pressure & Suction Valves

Premium quality full bore ball valves with wide range ofconnection options ; full compatibility with ‘SSW’ System;PTFE ball seals ; Sizes from ¼" to 6" ; Rated to 400 PSI

BVAL Aluminum Unrestricted Bore Valves, ¼“-6" ...................................14BV3L 3-Way Low Pressure Diverter Valves, ¼“-2" .................................34Dimensions and Configuration Guide for BVAL & BV3L.................................15, 35Service Parts BOM for BVAL & BV3L Valves ................................................16, 36'BVAL' & 'BV3L' Flow Characteristic Curves and Ordering Codes ...................17, 37

Medium Pressure for 2000 PSI

New for 2001 ! DMIC’s medium pressure valves save masswhen a full pressure valve is not needed. Sizes to 6" bore

BVAM Carbon Steel Mid Pressure Valves, sizes to 6" ...............................18Dimensions and Configuration Guide for BVAM..................................................19Service Parts BOM for BVAM Valves ..................................................................20'BVAM' Flow Characteristic Curves and Ordering Codes......................................21

Introduction to DMIC Ball Valves

Buyer’s Resource Guide introduces expanded Ball Valveofferings and Factory Pre-Engineered Accessories

Construction Features of DMIC Ball Valves ...........................................................5Ordering Codes and Option Selection for DMIC Ball Valves ..............................6-13

Choosing a Ball Valve Series .........................................................................7Size Availability by Ball Valve Series ..............................................................8Specifying step-size or unlike connection special valves ................................8Connection Availability by Ball Valve Series ...................................................9Overriding Valve and Sealing Materials with Construction Codes ..................10

Specifying Pre-Engineered Accessories with Accessory Suffix............................11Table of Accessory Availability By Valve Series .............................................12-13Ordering Genuine DMIC Accessories and Replacement Parts..............................11

DMIC Ball Valves Catalog DBV-0101E* Call Toll Free 1-800-248-3642Copyright © 2001 Delaware Mfg. Page 3 In Canada 1-800-320-3642

Ultimate Pressure to 15000 PSI

Next Generation Design substantially strengthened forenhanced safety factor at elevated operating pressures

BVHH Carbon Steel 10,000 & 15,000 PSI Ball Valves to 2"......................28Dimensions and Configuration Guide for BVHH Super High Pressure Valves........28Flow Characteristic Curves and Ordering Codes .................................................29

Multiway Diverter Valves

Exclusive offset design eliminates welded/brazed 3rd port ;Optional Stainless Steel Construction ; Sizes from ¼"-2”

BV3L Low Pressure L-Bore Diverter, 400 PSI, ¼"-2" .............................34BV3D Steel L-Bore Diverter for 3000 PSI, ¼"-2"......................................30Ball Pattern Schematics for BV3D and BV3L ................................................31, 35Dimensions and Configuration Guide for DMIC Diverter Valves......................32, 36BV3D/BV3L Flow Characteristic Curves and Ordering Codes.........................33, 37

‘BV3H’ & ‘BV4H’ True Multiway

True 3-Way & 4-Way High Pressure Ball Valves with choiceof Ball Pattern, accept high port-to-port �P without leakage

BV3H 3-Way Steel Selector Ball Valves, 6000 PSI...................................38BV4H 4-Way Steel Selector Ball Valves, 6000 PSI...................................38Multiway Ball Portings, ISO Circuit Symbols & Handle Phase Diagram ................39BV3H/BV4H Flow Characteristic Curves and Ordering Codes ..............................41

High Pressure for 6000 PSI

The Benchmark of Quality in High Pressure Valves ;Expanded ordering codes and accessory selection

BVH Block Body Ball Valves for 6000 PSI, ¼"-1 ...................................22BVAH Offset Round Body Ball Valves for 6000 PSI, 1¼"-2”.....................22BVAH Heavy Duty Round Body Ball Valves, 2½"-6” ................................22Dimensions and Configuration Guide for BVH/BVAH High Pressure ...............23-25Flow Characteristic Curves and Service Parts BOM ............................................26

‘BVMM’ Manifold Mounted

Manifold Mounted 2-Way & 3-Way High Pressure Valveswith refined, lower cost design make the best qualitymanifold mount valve also the most affordable

BVMM Manifold Mounted 2- & 3-Way Valves, 6000 PSI ...........................42BVMM-4 Lightweight Version for Aluminum Manifolds, 3000 PSI ................42Multiway Ball Portings, ISO Circuit Symbols & Handle Phase Diagram ................44

Options & Technical Appendix

Please see the Accessory Section Index on Page 11

Spare Handles, Locking Handle Kits, Mountings, Actuation.................................11Ball Valve Principle of Operation.........................................................................46Sealing Material Characteristics, Thermoplastic & Elastomer ..............................48One Year Limited Warranty ................................................................................ 51


About DMIC Ball ValvesDMIC’s continuous development has yielded

enhanced durability and functional improvements

Respect for the EnvironmentAll DMIC valves are tested, cleaned, and plugged air- & oil-tight before they are made availablefor shipment. DMIC supports the environment by using only biodegradable, recyclable paperpackaging. Wasteful unit packaging is minimized in favor of well-packed, “peanut-free”, robustshipments that arrive in excellent condition.

Thinking Like Our CustomersThe DMIC Distributor and OEM is our partner in quality. Some Fluid Power houses resell whichever brand resultsin the largest profit margin. The DMIC factory refers End-User inquiries to true Distributors who promote DMIC’squality objectives wholeheartedly.The DMIC factory protects and supports your local Stocking Distributor with comprehensive inventory, direct line toin-house Technical Sales & Engineering, drop shipment capability, same-day shipping of most orders, and special &custom product capabilities for OEM volume & blanket orders.

Best-Of-Breed Valve DesignsContinuous improvement to DMIC Ball Valves has furthered our design leadership.In the marketplace and the field, power units and systems bearing DMIC Valves are recognized, as are theirconstructors, to be “above the average”. DMIC full port unrestricted bore ball valves have led the way in innovativedesign, practical engineering & technical excellence since 1985. DMIC’s updated series continue to offer buyers thenext level of innovation, technical achievement, and engineering excellence, setting the next standards by whichcompeting Ball Valves are judged

Made in DMIC's U.S. FactoryThe wired global village pits the industry’s best companies in competition throughout the world marketplace.Increasingly, DMIC high pressure ball valves are a leading imported brand in export markets - a testimonial byBuyers who appreciate a superior product.DMIC’s roots run deep with the pride of crafting a better product. We are discriminating people as Buyers, and we expectnot only a better product but better value. DMIC people are perfectionists: an aspiration we hope you’ll recognize in eachDMIC product we offer for sale.

Multi-Stage Quality ControlEach DMIC Ball Valve undergoes at least four quality assurance checks in the manufacturing process, and a visualcheck at shipping time. The result is product of consistent quality, infrequent warranty returns, and reduceddowntime & back-shipping expense to the Buyer. All DMIC products, whether of domestic or foreign production, arebuilt to DMIC’s specifications. For products manufactured in our U.S. & Canadian plants, we are further refining ourinternal quality assurance procedures in preparation for a forthcoming ISO 9001 certification.

Innovative In-House EngineeringThe initial purchase price of imported commodity valves can seem lower if quality and after sales service aresecondary to "price". DMIC's leadership in the Engineering arena is known throughout the fluid power sector, andwe will save you not only money but problems.When you specify a DMIC product, it may incorporate improvements that were not in the production channel when thecatalog was printed. Running improvements are incorporated as a part of our continual product development. Whendesigning by spec, please request a certified print.


Standard Features‘Innovation through dedication’ yields a consistentlyhigh quality product range, priced competitively

Color Coded By Port ThreadTo simplify identification of genuine DMIC High Pressure Ball Valves in the stockroomand in the circuit, valves are factory coded according to the port thread.

Spindle-Glide� ConstructionThis DMIC innovation utilizes polyamide thrust bearings both inside the valve as well as between thestop washer and body to reduce wear & friction during valve actuation. With the genuine DMIC LockingHandle Kit option, an auxiliary bearing is also installed between the base and lever plates.

A factory application of synthetic lubricant* inside the valve during manufacturing, as well as within thesealed Spindle-Glide� system, ensures that the valve will be as smooth to operate years after it is set asit was when it was new, because you can never predict when there will be an emergency.

Stock Selection of Ball SealsDMIC‘s latest ball seal thermoplastic formulation reduces actuation torque, whileincreasing longevity of the ball seals. DMIC’s thermoplastic specification reduces frictionbetween the ball and the seals during actuation, reducing actuation torque and axial stress onthe stem seals. In conjunction with Spindle-Glide� construction, DMIC High Pressure BallValves offer one of the industry’s lowest actuation torques. DMIC’s “Super Low Friction”optional sealing further enhances performance under actuation.

Pressure Balancing OrificeDMIC refines the sealing principle of our original “floating ball” valve design by providing an orifice at the stemslot, which improves sealing while providing internal lubrication. In a “floating ball” design, as line pressureincreases at a closed valve, the ball is pressed against the far Ball Seal. DMIC’s innovative balancing orifice at the stemslot allows the line pressure to be applied from behind the far Ball Seal as well, resulting in improved sealing, especiallyat lower line pressures and vacuum.

America once said, “We choose to go to the moon, not because it is easy - but because it is hard”. Taking the high road has itsrewards, not the least of which is the pride & satisfaction of making a product that improves the quality of life for someone,somewhere - whether that be a child at Disneyland, an automaker whose production line stays up due to the absence of qualityproblems, or an American worker who has a job because we’ve chosen to do it the hard way.

Not every vendor of ball valves feels such dedication to innovation and originality, and thus, we present the list of DMIC StandardFeatures you’re most likely to see the from the competition, once their offshore manufacturer has had a chance toreverse-engineer and copy the innovations we introduce here:

Custom Mill Runs of SteelDMIC has invested in custom engineered steels for DMIC valves.

DMIC’s custom “mill runs” benefit from modern metallurgy to provide steel of additionalstrength, superior finish, and ultimately, quality, than lower cost general purpose steel.

Unrestricted Bore Designs (most models)Most 2-way DMIC Ball Valves are designed with an unrestricted “full” bore relative to the cross-sectional area of fluid lines connected to thevalve. Additionally, DMIC only uses a STRAIGHT bore passage in every valve model to aid laminar flow (some brands use a concave, hollowball). The result is that the Coefficient of Flow (Cv) and Pressure Drop (�P) of a DMIC Ball Valve very closely approximates a like lengthsection of fluid line. Except in fancy circuits, you can treat our valves as just the same length of pipe, due to the unrestricted bore.

NOTE (*): Synthetic Lubricant deleted on EPR-optioned valves.

Blue Capfor SAE

NPTF

BSP

ISO6149

ISO1179

Other


Wide variety of mountingsDMIC is the leading supplier of panel mounting HP ball valves in North America.

DMIC’s In-House Manufacturing results in fast delivery of Panel & Substratemounted Ball Valves for industry. The new generation design of DMIC HighPressure valves allows every model (except brass valves) to be panel mounted.When designing products using DMIC Panel or Substrate Mounted Ball Valves,please call DMIC HelpLine to request a certified print for your selected valve(s).

Cross-Series Accessory ApplicabilityDMIC’s obsession with engineering excellence has resulted in the industry’s largest collection of original Pre-Engineered accessories suchas Locking Handles, Limit Switch Brackets, Rotary Actuation packages, and innovative solutions for esoteric application problems.

Buyers of DMIC Ball Valves can now leverage this time- and labor-saving resource across the entire project, rather than just on a few highpressure valves. DMIC’s new ‘BVAL’ and ‘BVAM’ Low & Mid Pressure Valves share many key attributes of the High Pressure series, allowingmany HP valve accessories to be used, unchanged. Greater commonality and fewer part numbers to stock mean your design gets a littlesimpler, more elegant, and most importantly, cost efficient. When quality overrides price in your project, insist on “DMIC - No Substitute”.

O-Ring + Backup SealingDMIC is one of the few manufacturers to incorporate backup rings at the stem & connection*

seals, in addition to a premium brand O-Ring, in all steel Ball Valves.

The reason for deleting this very critical component is primarily cost - it takes twice the time toinstall two seals carefully. A DMIC craftsman fits each premium brand O-ring and backup byhand, while individually inspecting components for defects as the parts are matched. A factoryapplication of synthetic lubricant during parts matching eliminates damage to stem seals, andkeeps the valve internally lubricated while it awaits initial service.NOTE (*): Connection backups now standard on valves 1¼" and larger

Updated Ordering CodesNow you can specify threaded and flanged valves with

interchangeable, compatible connection suffixesDMIC’s updated ordering codes allow the Buyer to easily specify any Ball Valve that is possible to manufacture. Ingeneral, each DMIC part number is made up of PRODUCT SERIES, SIZE, CONNECTION, and a four position materialCONSTRUCTION CODE.

Almost all accessories, mountings,and actuation can be specified withDMIC ACCESSORY CODES (page 11-12).

ConstructionCodes

Four DigitSize Code

ConnectionSuffix

4 3 2 1BVAL 0750

ProductSeries

IU

AccessoryCodes

Product Series - Page 7The entire DMIC product line is encoded to sort by product series, in increasing order of size, on your computer...no more arcanepart number searches. Each series code is a mnemonic of the item it represents, such as ‘BVH’ for Ball Valve High Pressure.

Four-Digit Size Code - Page 8The exclusive four-digit size code, in thousandths of an inch, provides at a glance, an easy “double-check” of correct port sizing andconnection thread on your BOM or P/O. For valves made to imperial units, the size code is delimited by a dash (eg. BVAH-1500N-1113).

Connection Suffix (New for ‘01) - Page 9All DMIC Ball Valves now utilize a Connection Suffix, including Flanged & Welded models. See pages 7-13 for more info.

Construction & Accessory Codes - Page 10-13The Buyer can specify valve options by changing the standard “-1111" suffix code. For standard ball valves, no Construction Codeis required. We have greatly simplified the ordering process for DMIC Ball Valves with factory installed accessories.

A Z Z A Z Z


Valve Series SelectionDMIC’s modular part numbering system lets designers

precisely specify and override the connection styleDMIC has earned recognition for being able to furnish thecustomer’s exact requirement quickly and accurately.We have fine-tuned the flow of our Factory toaccommodate special and custom orders on thestandard production line, and with this catalog releasewe now enable the Buyer to directly benefit from thisflexibilty with new DMIC Ordering Codes.

Fewer models with more connection choices

We have consolidated the previous 18 valve series into 9 series,and added a comprehensive connection option program.

You can now order any valve series with any connection style thatis appropriate to the functional characteristics of the valve. Buyersof specialty products may even specify the connection style on anend-by-end basis, for production in days - not months.For application and part number cross reference assistance pleasefeel welcome to call the Factory toll-free at 1-800-248-3642.

Greater Commonality of Pre-EngineeredAccessories, Seal Kits, and Actuation Options

It’s now easier than ever to select, specify, and stock DMIC Valvesand Accessories. In these updated designs, we have paidspecific attention to accessory commonality, resulting in fewerpart numbers and lower cost for the Buyer. Refer to theAccessory Selection section of the valve specification sheets foraccessory part numbers and compatibility information.

Streamlined option codes and reapplication ofprevious solutions saves you time and money

For years, DMIC has formulated an online database of thousandsof specialty valves under the part numbers in this catalog. OurCustomer Care Reps are ready to quote you price and accuratedelivery for standard production, AND special purpose valves.

New for 2001, almost all DMIC Ball Valveoptions including actuation and special

mountings can be specified throughConstruction and Accessory codes.

Please see pages 10 through 13.

Old New Descrip tion o f

Series Series Changes

BVL BVALUpgraded design in lightweight aluminum,

three geometries span size ranges from ¼"-6",

accepts SAE and ISO6149 'SSW" layout adapters.

BVHConnection in thread and flange types is now

specified with CONNECTION SUFFIX.

BVAM BVAMAll new ! Design derived from

BVAL lightweight series in carbon steel

for 2000 PSI max. rated pressure.

BVAHConnection in thread and flange types is now

specified with CONNECTION SUFFIX.

BVHH BVHHAll new ! Ultra heavy duty design

derived from OEM water hydraulic series.

Enhanced safety factor.

BV3D

BV3L

Connection specified with CONNECTION SUFFIX.

New 400 PSI version in aluminum.

BV3H

BV4H

BV3H

BV4H

All new ! Design upgraded from

experience with aircraft/military OEMs

BVFMBVH

BVAH

Use connection suffix "FM" to select

SAE 4-B C.61 Companion connection (UNC)on selected BVH (½"-1") or BVAH (1¼"-4") valve.

BVFHBVH

BVAH

Use connection suffix "FH" to select

SAE 4-B C.62 Companion connection (UNC)on selected BVH (½"-1") or BVAH (1¼"-4") valve.

BVSMBVH

BVAH

Use connection suffix "SM" to select

SAE Split Flange C.61 connectionon selected BVH (½"-1") or BVAH (1¼"-4") valve.

BVSHBVH

BVAH

Use connection suffix "SH" to select

SAE Split Flange C.62 connectionon selected BVH (½"-1") or BVAH (1¼"-4") valve.

BVFM-SMBVH

BVAH

Use connection suffix "CM" to select

Combo 4-Bolt/Split C.61 connectionon selected BVH (½"-1") or BVAH (1¼"-4") valve..

BVFH-SHBVH

BVAH

Use connection suffix "CH" to select

Combo 4-Bolt/Split C.62 connectionon selected BVH (½"-1") or BVAH (1¼"-4") valve.

BVFA

BVH

BVAH

BVAL

Select connection suffix "A*" to correspond to

desired ANSI Class Flange connectionon selected BVH (½"-1") or BVAH (1¼"-4") valve.

For Class 150 the BVAL valve can also be selected.

BVFDBVH

BVAH

Select connection suffix "D*" to correspond to

desired DIN Class Flange connectionon selected BVH (½"-1") or BVAH (1¼"-4") valve.

BVAWBVH

BVAH

Use connection suffix "W4" to select

EZ-Weld Sch.40 Socket Weld connectionon selected BVH (½"-1") or BVAH (1¼"-4") valve.

BVMMBVMM

BVMM-4

All new ! Design upgraded from

experience with aircraft/military OEMs. New

aluminum model (-4111) for 3000 PSI use on

aluminum manifolds.

DMIC Ball Valve Series Cross Reference

BVAL 1000 SM

The following valve models arereplaced by connection options

on a valve series:

BVFM, BVFH, BVSM, BVSH,BVF-S, BVFA, BVFD, BVAW

4 3 2 1


Valve Size SelectionDMIC’s Ball Valve product line includes sizes spanningcommonly used pressure ranges from ¼” to 6” and upIf merely being able to convert existing valves to meetyour requirement were a satisfactory achievement tous, then DMIC’s Engineering and Production departments would never have developed our uniquefactory architecture that lets standard and custom Ball Valve orders be manufacturedside-by-side in ourAmerican Factory.DMIC Ball Valves offer theindustry’s most flexible size rangewith deliveries that are often afraction of what you would expect.

When your need for a specialty ballvalve meets our modestproduction criteria, we will gladlydesign, prototype, test, andwarranty the subject valve.

The result is reduced deliverytimes, development expense, anda direct partnership with themanufacturer which DMICcustomers value greatly in thoserare instances where the need fortroubleshooting and correctionsarise.

Customizing DMIC ValvesTo specify “unlike connection” or step-size customorder valves, use DMIC “2+2” Ordering Codes

InchOrder

CodeMetr ic BVAL BV3L

BVL

BrassBVAM BVH BV3D BVAH BVHH

BV3H

BV4H

¼" 0250 6 mm � � � � � �

d" 0375 10mm � � � � � �

½" 0500 12mm � � � � � � �

¾" 0750 20mm � � � � � � �

1" 1000 25mm � � � � � � �

1¼" 1250 32mm � � � � � � � � �

1½" 1500 40mm � � � � � � � � �

2" 2000 50mm � � � � � � � � �

2½" 2500 60 mm � � � � � � �

3" 3000 75 mm � � � � � � �

4" 4000 100 mm � � � � � �

5" 5000 125 mm � � � � �

6" 6000 150 mm � � � � �

Valve Size Size Availability By Valve SeriesNOMINAL LOW PRES. HIGH PRESSURE

BVAL 1000 SM 4 3 2 1

DMIC customers enjoy unparalleled availability of specialized andcustom valves, in addition to stock offerings. We devised the "2+2code" system to allow Buyers to uniformly specify unlikeconnections on otherwise standard valves.

Suppose you require a BV3D-1000 3-way diverter with one C.61Split Flange connection for rigid mounting, one C.61 4-BoltCompanion port, and an ISO6149 Threaded port. Specifying thisvalve could become a nightmare (let alone the delivery waiting timefrom overseas), but not for DMIC customers. Please follow theexample at right to see how this valve is requested, and how yourquotation and production will proceed using the 2+2 codes and SANsystem. To formulate a "2+2" code, take the FIRST TWO digits ofthe SIZE and append the CONNECTION CODE (next page).

1. Determine the size and connection for each port ofthe valve. Contract into 2+2 codes:

2. Collate the connection codes (for multiway valves, in the publishedport sequence for accurate positioning at the Factory):

3. Call your Distributor or DMIC with the composite valve p/n. We willsearch the SAN database and quote pricing/delivery. With your PO,if a SAN is req’d one will be assigned, and your valve is on the way !

1000 SM 10 SM

1000 FM 10 FM

It's easy !Just chopthe last twodigits of thesize codeoff and joinup with theconnectioncode1000 IU 10 IU

BV3D 10 SM 10 FM 10 IU


Connection AvailabilityIn-House Engineering and Manufacturing permits

DMIC to furnish a wide variety of connection options

Code Desc BVAL BV3LBVL

BrassBVAM BVH BV3D BVAH BVHH BV3H BV4H BVMM

S SAE-F ORB � � � � � � � � � � �

N NPT-F � � � � � � � � � � �

IU ISO6149 � � � � � � � � � � �

IA ISO1179 � � � � � � � � � � �

B BSPP-F � � � � � � � � � � �

T BSPT-F � � � � � � � � � � �

MJ JIC-M � � � � � � � � � � �

MD DIN2353-M Tube (call) � � � � � � � � � � �

MS SAE-M ORB (custom order) � � � � � � � � � � �

MN NPT-M (custom order) � � � � � � � � � � �

FM C.61 Companion, UNC Bolt Holes � � � � � � � � � � �

FH C.62 Companion, UNC Bolt Holes � � � � � � � � � � �

GM C.61 Companion, Metric B/H � � � � � � � � � � �

GH C.62 Companion, Metric B/H � � � � � � � � � � �

FL Universal C.61 Std., Thru B/H � � � � � � � � � � �

FK Universal C.62 Std., Thru B/H � � � � � � � � � � �

SM SAE C.61 Split Flg Head � � � � � � � � � � �

SH SAE C.62 Split Flg Head � � � � � � � � � � �

AA Class 150 (275 PSI @ 100°F) � � � � � � � � � � �

AB Class 300 (720 PSI @ 100°F) � � � � � � � � � � �

AC Class 400 (960 PSI @ 100°F) � � � � � � � � � � �

AD Class 600 (1440 PSI @ 100°F) � � � � � � � � � � �

AE Class 900 (2160 PSI @ 100°F) � � � � � � � � � � �

AF Class 1500 (3600 PSI @ 100°F) � � � � � � � � � � �

AG Class 2500 (6000 PSI @ 100°F) � � � � � � � � � � �

DA DIN 3202-F1 Flange, 4/8 Bolt � � � � � � � � � �

DB DIN 3202-F4 Flange, 4/8 Bolt � � � � � � � � � �

W4 Socket Weld for Pipe � � � � � � � � � � �

n/a DMIC 2-Way Industry Std. Pad � � � � � � � � � � �

n/a DMIC 3-Way Industry Std. Pad � � � � � � � � � � �

Connection Availability By Valve SeriesLOW PRES. HIGH PRESSURE

SAE SPLIT FLANGE HEAD

FEMALE THREADED CONNECTIONS

Connection Style

MALE THREADED CONNECTIONS

SAE 4-BOLT COMPANION FLANGE

SAE 4-BOLT STANDARD FLANGE

MANIFOLD MOUNT, 2- AND 3-WAY

ANSI FLANGE

DIN FLANGE

DMIC REPAIRABLE/ORIENTABLE SOCKET WELD CONNECTION

The previous ‘BVFM’, ‘BVFH’, ‘BVSM’, ‘BVSH’, ‘BVF-S’, ‘BVFA’,‘BVFD’, and ‘BVAW’ models are now specified as connectionoptions on the selected valve series.

Buyers may now specify the valve suitable to the application without being constrained by unnecessary connection restrictions. Valveschecked with the "double diamond" below are composite valves made from threaded connections and 'SSW' / 'HSSW' System adaptors.

BVAL 1000 SM 4 3 2 1


BVAL BV3LBVL

BrassBVAM BVH BV3D BVAH BVHH BV3H BV4H BVMM

Carbon Steel 1 � � � � � � � � � � �

Stainless Steel 2 � � � � � � � � � � �

Brass 3 � � � � � � � � � � �

Aluminum 4 � � � � � � � � � � �

Carbon Steel 1 � � � � � � � � � � �

Stainless Steel 2 � � � � � � � � � � �

Brass 3 � � � � � � � � � � �

Delrin 1 � � � � � � � � � � �

PTFE Teflon (1500 PSI max) 2 � � � � � � � � � � �

n/a - reserved 3 � � � � � � � � � � �

High Temp 400°F max 4 � � � � � � � � � � �

n/a - reserved 5 � � � � � � � � � � �

Ultra Low Friction 6 � � � � � � � � � � �

Glass Reinforced PTFE 7 � � � � � � � � � � �

Hostile Media 9 � � � � � � � � � � �

Buna-N 1 � � � � � � � � � � �

EPR 2 � � � � � � � � � � �

Viton 3 � � � � � � � � � � �

High Temperature 4 � � � � � � � � � � �

BALL AND SPINDLE MATERIAL - POSITION 2

THERMOPLASTIC BALL SEAL MATERIAL - POSITION 3

ELASTOMER O-RING SEAL MATERIAL - POSITION 4

Availability By Valve SeriesLOW PRES. HIGH PRESSURE

Code

BODY MATERIAL - POSITION 1

Material Description

Descrip tion

Construction CodesBuyers may easily specify optional material andphysical features by appending a 4-digit suffixDMIC Construction Codes are designed to be asuniversal as possible across the Ball Valve productline. Each of four positions determines theconstruction of a particular part of the valve.

Refer to Spec Sheets forStandard Configuration by

Valve SeriesStandard materials are demonstrated in the Ordering CodesSummary for each series. Based on the service pressure anddesign intent of a particular valve model, DMIC supplies valvesmade from aluminum or steel with Delrin or PTFE ball sealing.Buna-N elastomer seals are standard on all DMIC Ball Valves.

Body MaterialBall & Spindle MaterialBall Seal MaterialsO-Ring & Backup Seal Materials

BVAL 1000 SM 4 3 2 1

Symbol Legend

�= Standard feature for this valve series�= Rapid Delivery Option�= Call to confirm leadtime�= Not Available�= Composite valve (made with SSW/HSSW)


About DMIC AccessoriesSee Pages 12-13 for a comprehensive listing offrequently ordered DMIC Ball Valve AccessoriesOne of the rewards of a disciplined Engineeringphilosophy is that, over the years, what you do fits in withwhat you did and the big picture comes into focus. DMICPre-Engineered Ball Valve Accessories featureinterchangeability as a hallmark of their design.

As the final part of our nomenclature update, we nowprovide a unified system allowing Buyers to easilyspecify accessories without worrying about valvecompatibility. See the next page for a comprehensiveordering table.

Here are some common questions and customercomments about DMIC Ball Valves & Accessories:

Should I order valves and accessories "À LaCarte" or use the Accessory Codes on p.12 ?

DMIC recommends that you use the Accessory Codes tospecify valves with options such as Locking Handles,Custom Mountings, and Actuation. By doing so, yourvalve leaves our Factory in exactly the desiredconfiguration.

Distributors may still order accessories separately.Because it is possible for customers to inadvertentlyspecify valves and accessories that are either mutuallyexclusive or will not fit together without factory valvepreparation, we suggest you use Accessory Codes.

"We hate it when you guyschange part numbers !"

Rest assured that "old" part numbers will be convertible tonew ones for many years, and the new nomenclatureallows us to introduce future products without having torename accessories. This change has been ongoing in ourFactory since 1997 and has helped improve our ratio ofshipment from stock.

"I ordered a 'BVAL' accessory separately,but the invoice says the accessory

is for a 'BVAH' valve. Why ?"

We put a lot of effort into making DMIC Accessories fit the mostpossible valve series and size spreads within series. When you askfor a specific accessory, it may be common to many differentvalves. We name accessories according to the most popularseries that accept them, for ease of identification and to identify themost obvious application to our Distributors and OEMs.

DMIC is your source for specialBall Valves and Accessories

The DMIC Factory is a capable partner in furnishing valves andaccessories for your most demanding applications. We can saveyou time, money when a special ball valve is needed.

Genuine

U.S.A.


Accessory CodesNew for 2001! Frequently ordered special valves cannow be specified more easily than ever beforeDMIC originated the practice of adding “slash codes” to specify optional features over fifteen years ago. Since then, thearray of genuine DMIC Pre Engineered Accessories and Actuation for DMIC Ball Valves has continued to steadily grow.With thousands of specials on file, we’re now pleased to offer you direct access to these products !

Many “specials” arestandard at DMIC,with fast delivery

By adding the additional “bank” ofsix Accessory Codes, asdemonstrated at right, you can nowdirectly specify the options in theadjacent table as components ofthe valve with Factory stamping.

Please see the worksheet on thenext page for a comprehensivelisting of options, and an exampleof how to specify a customizedDMIC Ball Valve.

Completely customvalves receive a

DMIC “SAN” numberDMIC now allows most conceivablevalve & accessory combinations to becalled out directly by the Buyer, usingConstruction and Accessory codes.

However, valves that are completelyspecial, or cannot be defined withConstruction & Accessory codes, stillreceive a DMIC Engineering “SAN”(Special Assembly Number).

When you accept DMIC’s quotation andorder the product, a “SAN” (SpecialAssembly Number) is assigned for eachoptioned valve. This part number is usedto flow your order through productionand precisely document it for eventualservice parts.

BVAL&12345SAN numbers are formatted as in theexample above, where the valve seriesis suffixed with a unique serializednumber, eg “12345”.

BVAL

BV3L

BVL

BrassBVAM

BVH

BV3DBVAH BVHH

BV3H

BV4HBVMM

Locking Handle Kit /LH �/� � � �/� � � � �

Security Locking Handle Kit /LHS �/� � � �/� � � � �

Limit Switch Bracket, 1-Way /LSB1 �/� � � �/� � � � �



Locking Limit Switch Brkt, 1-Way /LLB1 �/� � � �/� � � � �



Include Switch(es) when ordering

DMIC LSB/LLB Brackets

add /S

to end � � � � � � � �

Forged Steel Handle /HS � � � � � � � �

Flat Fabricated Steel Handle /HA � � � � � � � �

Flat Anodized Aluminum Handle /HL � � � � � � � �

Offset Anodized Aluminum Handle /HK � � � � � � � �

T-Type High Torque Handle /HT � � � � � � � �

Delete Handle (i.e. "NO" handle) /HN � � � � � � � �

Handle Link Kit (specifies TWO

valves connected by one handle)/HLK � � � � � � � �

Equip for Actuator Mount /AM � � � � � � � �

Equip for Bottom Mounting /BM � � � � � � � �

Bottom & Side Mount /BSM � � � � � � � �

Locking Handle Mount /LHM � � � � � � � �

Equip for 1-Way Limit Sw Mount /LM1 � � � � � � � �

Equip for 2-Way Limit Sw Mount /LM2 � � � � � � � �

Equip for Panel Mounting (Top) /PM � � � � � � � �

Equip for Side Mounting /SBM � � � � � � � �

Equip for Security Lock Mount /SLM � � � � � � � �

Factory install Pneumatic

Double-Acting Actuator/DA* � � � � � � � �

Factory install Pneumatic

Spring Return Actuator/SR** � � � � � � � �

Factory install Hydraulic

Double-Acting Actuator/DA*H � � � � � � � �

Factory install Hydraulic

Spring Return Actuator/SR**H � � � � � � � �

Factory install Electric

Double Acting Actuator/E** � � � � � � � �

Option Description Availability By Valve SeriesDescrip tion o f

Accessory to be

Facto ry Instal led

Old

Code

LOW PRES. HIGH PRESSURE

ORDER ACTUATED BALL VALVES

Please cal l Dis tr ibuto r o r DMIC fo r ass is tance in determ ining Actuated Bal l Valve model .

VALVE PREPARATION OPTIONS - REQUIRES DMIC ACCESSORY KIT ORDER

Distr ibuto r/OEM placing order may speci fy valves wi th facto ry preparation sub ject to

DMIC's "special o rder" Sales Terms - p lease contact your Sales Associate fo r detai ls .

LOCKING AND SECURITY LOCKING HANDLE KITS (LOCK NOT INCLUDED)

LIMIT SWITCH BRACKET, SINGLE AND MULTIWAY

BALL VALVE HANDLE OVERRIDES/OPTIONS - REPLACES STANDARD HANDLE

Accessory Codes, cont.


BVAL 1000 SM 4 3 2 1 A Z Z A Z Z

Zero Accessory ("none") Z

Locking Handle A /LH

Security Locking Handle B /LHS

Limit Switch Bracket - Single C /LSB1

Limit Switch Bracket - Dual D /LSB2

Locking Limit Switch Brkt - Single E /LLB1

Locking Limit Switch Brkt - Dual F /LLB2

Security Locking Limit Switch Brkt - Single G /SLB1

Security Locking Limit Switch Brkt - Dual H /SLB2

Limit Switch Brkt - Single, with Switch I /LSB1 /S

Limit Switch Brkt - Dual, with Switches J /LSB2 /S

Locking Limit Switch Brkt - Single, w/Switch K /LLB1 /S

Locking Limit Switch Brkt - Dual, w/Switch L /LLB2 /S

Security Locking L.S. Brkt - Single, w/Switch M /SLB1 /S

Security Locking L.S. Brkt - Dual, w/Switch N /SLB2 /S

Group I Accessories

Locking Handles & Limit SwitchesEquivalent

"s lash codes"

Accessory

CodeDescrip tion


Actuator Bracket Mounting Holes A /AM

Bottom Mounting Holes B /BM

Bottom & Side Combination Mounting Holes C /BSM

Locking Handle Mount D /LHM

Single Limit Switch Bracket Mounting Holes E /LM1

Dual Limit Switch Bracket Mounting Holes F /LM2

Panel Mounting Holes G /PM

Side Mounting Holes / Side Mt. Brkt Holes H /SBM

Security Lock Mount I /SLM

Security Lock and Single L.S. Brkt Mtg Holes J /SLM /LM1

Security Lock and Dual L.S. Brkt Mtg Holes K /SLM /LM2

Group II Accessories

Mounting Patterns & Accessory Preparation

Descrip tionAccessory

Code

Equivalent

"s lash codes"


Double Acting Pneumatic Actuator, Size "A" A /DAA Single Acting Pneumatic Actuator, Size "A" M /SRA

Double Acting Pneumatic Actuator, Size "B" B /DAB Single Acting Pneumatic Actuator, Size "B" N /SRB

Double Acting Pneumatic Actuator, Size "C" C /DAC Single Acting Pneumatic Actuator, Size "C" O /SRC

Double Acting Pneumatic Actuator, Size "D" D /DAD Single Acting Pneumatic Actuator, Size "D" P /SRD

Double Acting Pneumatic Actuator, Size "E" E /DAE Single Acting Pneumatic Actuator, Size "E" Q /SRE

Double Acting Pneumatic Actuator, Size "F" F /DAF Single Acting Pneumatic Actuator, Size "F" R /SRF

Double Acting Pneumatic Actuator, Size "G" G /DAG Single Acting Pneumatic Actuator, Size "G" S /SRG

Double Acting Pneumatic Actuator, Size "H" H /DAH Single Acting Pneumatic Actuator, Size "H" T /SRH

Double Acting Pneumatic Actuator, Size "I" I /DAI Single Acting Pneumatic Actuator, Size "I" U /SRI

Double Acting Pneumatic Actuator, Size "J" J /DAJ Single Acting Pneumatic Actuator, Size "J" V /SRJ

Double Acting Pneumatic Actuator, Size "K" K /DAK Single Acting Pneumatic Actuator, Size "K" W /SRK

Double Acting Pneumatic Actuator, Size "L" L /DAL Single Acting Pneumatic Actuator, Size "L" X /SRL


Code

Equivalent

"s lash codes"

Group III Accessories

Complete Actuation Packages, Pneumatic, Double Acting & Spring Return


Code

Equivalent

"s lash codes"

Zero Accessory ("standard handle") Z

Handle, Crank, Steel A /HS

Handle, Flat, Steel B /HA

Handle, Flat Offset, Steel C /HA45

Handle, T-Type High Torque, Steel D /HT

Handle, Crank, Aluminum N /HK

Handle, Flat, Aluminum O /HL

Group IV Accessories

Handle Type


Code

Equivalent

"s lash codes"


Bottom Bracket A /BB

Side Bracket B /SB

Group V Accessories

Mounting Brackets


Code

Equivalent

"s lash codes"

Zero Accessory ("standard finish") Z

Black Oxide A

Clear Anodize B /AN

Nickel Plated C

Zinc Dichromate Plated D

Group VI Accessories

Valve Surface Finish


Code

Equivalent

"s lash codes"


‘BVAL’ Low PressureIdeal from suction to 400 PSI ; NPT/SAE/6149/BSPPTFE Ball Seals ; Optimized for DMIC’s ‘SSW’ SystemThis series upgrades the old ‘BVL’, ‘BVM’ ,‘BVUM’ brass valves; all sizes unrestricted bore.

BVAL

Valve

Width

B

Valve

Bore

C

Handle

Length

D

400 1.50 0.25 3.37

27.6 38.1 6.4 65.8

400 1.50 0.38 3.37

27.6 38.1 9.5 65.8

400 1.50 0.50 3.37

27.6 38.1 12.7 65.8

400 1.75 0.75 5.12

27.6 44.5 19.1 95.8

400 2.00 1.00 5.12

27.6 50.8 25.4 102.1

400 2.75 1.25 6.81

27.6 69.9 31.8 129.8

400 3.25 1.50 6.81

27.6 82.6 38.1 142.2

400 4.00 2.00 6.81

27.6 101.6 50.8 159.3

400 5.00 2.50 8.75

27.6 127.0 63.5 200.4

400 6.00 3.00 8.75

27.6 152.4 76.2 224.8

400 7.00 4.00 8.75

27.6 177.8 101.6 224.8

Rated

Pressure

PSI

(bar)

Port

Size

Common Dimensions

BVAL-0250*-4321 ¼"

Part Number

DIMENSIONS in (mm)

BVAL-1250*-4321

BVAL-0375*-4321 d"

BVAL-0500*-4321 ½"

BVAL-4000*-4321 4"

BVAL-0750*-4321 ¾"

BVAL-1500*-4321

BVAL-2000*-4321

BVAL-3000*-4321

BVAL-2500*-4321

1"BVAL-1000*-4321

3"

1¼"

1½"

2"

2½"

Most large bore valves sold in the hydraulic market today are simply“plumbing” valves, suitable primarily for low pressure, cold water use.

DMIC’s ‘BVAL’ is the first ball valve of its kind, specifically designedfor leak-free Hydraulic Suction & Return line durability to 6" full bore.Again, we’ve redefined the standard of quality ... in large bore valves.

� Built to take the pressure spikes, temperatures, & elevateddemands of hydraulic service

� Uses top grade Teflon ball seals, with O-Ring sealing throughout� Suitable for actuation and panel mounting, accepts the full range

of DMIC Ball Valve Accessories & Actuation Packages� A reliable choice for Phosphate Esters, Water Glycols, and other

unusual media (std model ships with Teflon ball seals / Buna-N O-rings)

About ‘BVAL’ SeriesThe ‘BVAL’ series is built from three geometries to spanour largest production size range from ¼” to 6”unrestricted bore. All ‘BVAL’ valves use aluminum valvebodies for low mass and strength in suction to 400 PSIapplications Please call DMIC for latest dimensions anddelivery of 5" and 6" models.

Common DimensionsThe following specifications are common to all ‘BVAL’ series valvesregardless of connection style. For valve length ‘A’ and other specificdimensions, please see Dependent Dimensions table adjacent page.

BVAL 1¼” to 2”Round body in the style ofDMIC’s ‘BVAH’ highpressure series. A naturalfor panel mounting andactuation.

BVAL ¼” to 1”Square body in the style ofDMIC’s ‘BVH’ high pressurevalve. The ¼” and d” sizesshare the ½” model'sexternal dimensions.

BVAL 2½” to 6”All new XL format designwith unrestricted borelightweight design. Panelmounting, actuation, fullrange of options. Offered inESAE O-R Seal, expanded6149, SAE and ANSI Flangemodels. Designed andMade in U.S.A.


‘BVAL’ Low PressureDependent DimensionsThese are the valve dimensions that vary based on your selection of aconnection style. Some connection styles provide additional dimensionsto those published at left; see supplemental sketches next page.

‘BVAL’ valves with flange and socket weld connections arecomposite valves, built using threaded valves and ‘SSW’adapters. To harness the full capabilities of DMIC’s ‘SSW’ PowerUnit Layout system please call DMIC Helpline at 1-800-248-3642 toobtain the Designer’s Guide.

Dimensional Sketches

‘BVAL’ Block Body, ¼” - 1”

‘BVAL’ Round Body, 1¼” - 2”

‘BVAL’ XL Round Body, 2½ - 4”(5” and up call Factory)

Due to our policy of continual product improvement,the specifications in this catalog may change without notice.

When designing by spec, please request a certified print.

BVAL

A E F G H

Port Code(s)Port

Size

Overal l

Length

Overal l

Height

Bo t to

PortCtr

PortCtr

to Top

Valve

Height

¼" 2.63 2.59 0.63 1.31 1.50

d" 2.63 2.59 0.63 1.31 1.50

½" 2.63 2.59 0.63 1.31 1.50

¾" 3.28 3.77 0.76 1.43 1.75

1" 3.48 4.02 0.88 1.56 2.00

1¼" 3.90 5.11 1.14 2.12 2.61

1½" 4.32 5.60 1.39 2.36 3.10

2" 4.90 6.33 1.82 2.65 3.83

2½" 6.00 7.89 2.50 3.63 5.35

3" 7.31 8.85 3.00 4.09 6.31

4" 8.89 9.90 3.50 4.63 7.36

A A - - -

Port Code(s)Port

Size

Overal l

Length

FM/GM

Overal l

Length

FL

Flg Pad

Long

Flg Pad

Short

UNC Bo l t

Thrd

¾" 7.65 8.78 1.88 0.88 d"

1" 7.85 9.09 2.06 1.03 d"

1¼" 8.50 9.76 2.31 1.19 7/16"

1½" 8.92 10.68 2.75 1.41 ½ "

2" 9.52 11.15 3.06 1.69 ½"

2½" 11.01 12.76 3.50 2.00 ½"

3" 12.66 15.16 4.19 2.44 e"

4" 14.24 16.74 5.13 3.06 e"

A - - - AC M

Port Code(s)Port

Size

Overal l

Length

O-R ing

No .

Length A

(Combo)

¾" 8.08 2-214 7.86

1" 8.28 2-219 8.06

1¼" 9.34 2-222 8.92

1½" 9.76 2-225 9.21

2" 10.84 2-228 10.18

2½" 12.36 2-232 11.69

3" 13.67 2-237 13.17

4" 15.77 2-245 15.01

A

Port Code(s)Port

Size

Overal l

Length

Flg

Diam

B/Ctr

Diam

Bo l tHo le

Dia

# Bo l t

Ho les

¾" 7.02 3.87 2.75 0.63 4

1" 7.36 4.25 3.13 0.63 4

1¼" 8.27 4.63 3.50 0.63 4

1½" 8.83 5.00 3.87 0.63 4

2" 9.65 6.00 4.75 0.75 4

2½" 11.24 7.00 5.50 0.75 4

3" 12.94 7.50 6.00 0.75 4

4" 14.76 9.00 7.50 0.75 8

A - -

Port Code(s)Port

Size

Overal l

Length

Pipe

OD

Socket

Depth

¾" 5.78 1.06 0.38

1" 5.98 1.33 0.38

1¼" 6.65 1.67 0.38

Dependent Dimensions

Dimension ( inches)

N

S

B

IU

IAThreaded

Connections

SM

CMSAE Split &

Combo Flange

Connections

FSL-2500SK

FSL-3000SK

FSL-4000SK

DMIC Spl i t

Flange Ki t

FSL-0750SK

Dimension ( inches)

Dimension ( inches)

W4

FM

GM

FLSAE 4-Bolt

Comp/Std

Flg Conn

AAANSI 150#

Flange

Connections(300 PSI nominal)

ANSI FLANGE CONN. (DIN also available, see p.24)

SWIVEL SOCKET WELD CONNECTION

FSL-2000SK

Dimension ( inches)

FSL-1250SK

FSL-1500SK

THREADED CONNECTION

SAE 4-BOLT FLANGE CONNECTION

SAE SPLIT FLANGE CONNECTION

Dimension ( inches)

FSL-1000SK

ANSI 150# FLANGE


‘BVAL’ Low Pressure

‘BVAL’ Service Parts BOM

'SSW' Possibilities'BVAL' from ¾" to 6" size can be configuredwith Hose Barb, 4-Bolt/Split /ANSI Flange, andSwivel Socket Weld connections. You can routemechanically rigid 'SSW' adapters in Inline, 45°,and 90° degree directions with dimensionaltolerances previously only dreamed of. Also, youcan interchangeably assemble Imperial andMetric standard power units to the same layoutdimensions. Please call DMIC HelpLine at1-800-248-3642 to obtain the 'SSW' Power Unit Layout Catalog.

'BVAL' WITH C.614-BOLT FLANGE

Order 'BVAL' with connectioncode FM to receive Code 61 SAE4-Bolt Companion connections.Order code GM for metric boltholes, or code FL for C.61 Std.Flange (through bolt holes).

'BVAL' C.61SPLIT FLANGE

Order connection code SM toreceive Code 61 Split FlangeHead connections rated to 400PSI. Rapid order a Split Flange kitwith suffix /SFK.

SWIVEL SOCKETWELD 'BVAL'

Order connection code W4 toreceive adjustable "swivel"socket weld connections for Sch.40 pipe. Rated to 400 PSI.

Service Parts BOMIndex Qty Descr iption

014 1 Valve Body

023 1 Ball

033 1 Spindle, Brass

042 2 Teflon Ball Seal

061 2 Connection O-Ring

071 1 Spindle O-Ring

091 1 Stop Pin

101 1 Stop Washer

111 1 Internal Glide Brg

124 2 Connection End

142 1 Spindle Glide Brg

154 1 Color Code Cap

162 1 Handle Bolt

184 1 Top Cap (XL sizes only)

201 1 Top Cap O-R (XL sizes only)

232 6 Top Cap SHCS (XL sizes only)

BVAL

DMIC ‘BVAL’ can be equipped with the industry’s widestarray of labor and cost-saving Ball Valve accessories,including:

� Locking Handles, OSHA type and Security� Limit Switch Brackets, with one or two switches,

and optional locking capability� Various Panel and Substrate mounting options� Turnkey Actuation Packages for Pneumatic,

Electric, and Hydraulic applications

New SimplifiedAccessory CodesFor 2001, we’ve made it even easier to get exactly the BallValve you need for rapid delivery. Please see page 12.

‘BVAL’ Accessories

BVAL Physical ConstructionParameter Mater ial

BODY Aluminum Body & Endcaps

BALL Brass, Chrome Plated

SPINDLE Brass, Oversize Area

STD HANDLE Aluminum Offset, Anodized

BALL SEALS PTFE (Teflon) standard

O-RINGS Buna-N standard, EPR/Viton quick del.

TEMP RANGE -22°F to 212°F (-30°/100°C)

LIFE

EXPECTANCYOver 1,000,000 cycles


‘BVAL’ Low Pressure

BVAL 4 3**** S

Code Port Size

0250 ¼"

0375 d"

0500 ½"

0750 ¾"

1000 1"

1250 1¼"

1500 1½"

2000 2"

2500 2½"

3000 3"

4000 4"

5000 5" - Call

6000 6" - Call

Size Codes

Code Desc

S SAE ORB

N NPT

Code Desc

B BSPP

T BSPT - special

Code Desc

IU ISO6149

IA ISO1179

Connection TypesIMPERIAL THREADS

METRIC THREADS

ISO THREADS

Code Descrip tion

4 Aluminum (standard)

Body Material

Code Descrip tion

3 Brass

Ball & Spindle Mat'l

12Code Descrip tion

1 Buna-N (Standard)

2 EPR

3 Viton

O-Ring Material

Code Descrip tion

2 PTFE Teflon

Ball Seal Material

‘BVAL’ Ordering Codes Summary

‘BVAL’ Performance Curves

'BVAL' Flow Characteristic Curves

Small Valve Sizes, ½" to 1¼"

0

10

20

30

40

50

60

0 50 100 150 200 250

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

0500 0750 1000

1250

'BVAL' Actuation Torque Guidelines


0

50

100

150

200

250

100 150 200 250 300 350 400

Working Pressure (PSI)

Actu

ati

on

To

rqu

e(i

n*

lbs)

0500

0750

1000

1250

'BVAL' Flow Characteristic Curves

Round Body and XL Valves, 1½" to 4"

0

10

20

30

40

0 100 200 300 400 500 600

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

1500

2000

3000

2500

4000

'BVAL' Actuation Torque Guidelines


0

100

200

300

400

500

600

700

800

900

1000

100 150 200 250 300 350 400


Actu

ati

on

To

rqu

e(i

n*

lbs)

2000

2500

1500

3000

4000

DMIC 'BVAL' Ball Valves aremanufactured in imperial“inch” and metric threads.SSW "composite" valves areconstructed from an (E)SAEO-Ring Threaded valve and'SSW' adapters. You can specifyany ball valve using SSWSystem "2+2" port codes (page8) and expect the aggregateproduct/cost to be supplied.


‘BVAM’ Mid PressureAn economical low mass alternative for mainstream2000 PSI applications ; Threaded models from 2½" to 6"Optional DMIC 'HSSW' System adapters for conversion to Flange and Socket Weld connection.

BVAM

Valve

Width

B

Valve

Bore

C

Handle

Length

D

2000

137.9

2000

137.9

2000

137.9

2000

137.9

2000

137.9

2000

137.9

2000

137.9

2000

137.9

2000 5.50 2.50 10.00

137.9 139.7 63.5 200.4

2000 6.50 3.00 10.00

137.9 165.1 76.2 224.8

2000 7.50 4.00 10.00

137.9 190.5 101.6 224.8

BVAM-2500*-1111

1"BVAM-1000*-1111

3"

1¼"

1½"

2"

2½"

d"

BVAM-0500*-1111 ½"

BVAM-4000*-1111 4"

BVAM-0750*-1111 ¾"

BVAM-1500*-1111

BVAM-2000*-1111

BVAM-3000*-1111

Rated

Pressure

PSI

(bar)

Port

Size

Common Dimensions

BVAM-0250*-1111 ¼"

Part Number

DIMENSIONS in (mm)

Available for large

quantity OEMs.

Please specify

BVH/BVAH

valves for

small bore applications.BVAM-1250*-1111

BVAM-0375*-1111

To meet customer price points, buyers of quality 6,000 PSI valves havesometimes had to compromise on the specification of 2,000 PSI valves.DMIC’s ‘BVAM’ series provides a cost effective, durable, high qualityball valve solution for quality oriented 2,000 PSI systems.

� DMIC’s leading quality-value profile in a purpose built 2,000 PSI valve� Built to take the pressure spikes, temperatures, & elevated demands of

hydraulic service� Uses top grade Delrin ball seals, with O-Ring sealing throughout� Suitable for actuation and panel mounting, accepts the full range of

DMIC High Pressure Ball Valve Accessories & Actuation Packages� A reliable choice for Phosphate Esters, Water Glycols, and other unusual

media (may require optional materials; ships with std. Buna-N seals)

About ‘BVAM’ SeriesThe ‘BVAM’ series builds upon years of 'BVAL' field provenperformance in an upsized steel version for 2000 PSI max.‘BVAM’ valves use steel construction for an economical lowmass option in large bore mid pressure 2000 PSIapplications.

Common DimensionsThe following specifications are common to all ‘BVAM’ series valvesregardless of connection style. For valve length ‘A’ and other specificdimensions, please see Dependent Dimensions table adjacent page.

BVAM 1¼” to 2”Round steel body in thestyle of DMIC’s ‘BVAH’high pressure series. Anatural for panel mountingand actuation.

BVAM ¼” to 1”Steel square body in thestyle of DMIC’s ‘BVH’ highpressure valve. The ¼”and d” sizes share ½”external dimensions.

BVAM 2½” to 6”All new XL format designwith unrestricted bore lowercost design. Panelmounting, actuation, fullrange of options. Offered inESAE O-R Seal, expanded6149, SAE and ANSI Flangemodels. Designed andMade in U.S.A. Max 2000PSI. Call for dimensions of5" and 6" sizes.

At this time we do not offer the smaller variations of'BVAM' through Distribution because the economicsrelative to the 'BVH' / 'BVAH' series do not qualify it.Please see the 6000 PSI series, page 22.

OEM volumeavailability

for 2001

OEMvolumeavailability

for 2001


‘BVAM’ Mid PressureDependent DimensionsThese are the valve dimensions that vary based on your selection of a connectionstyle. Some connection styles provide additional dimensions to those pubished at left;see supplemental sketches next page.

‘BVAM’ valves with flange and socket weld connections are composite valves,built using threaded valves and ‘HSSW’ adapters. To harness the full capabilities ofDMIC’s ‘SSW’ Power Unit Layout system please call DMIC Helpline at1-800-248-3642 to obtain the Designer’s Guide.

Dimensional Sketches‘BVAM’ Block Body, ¼” - 1”

‘BVAM’ Round Body, 1¼” - 2”

‘BVAM’ XL Round Body, 2½ - 4”(5” and up call Factory)

BVAM

A E F G H

Port Code(s)Port

Size

Overall

Length

Overall

Height

Bot to

CtrLine

CtrLine to

Top

Valve

Height

¼"

d"½"

¾"

1"

1¼"

1½"

2"

2½" 5.97 9.28 2.75 4.19 6.16

3" 7.41 10.27 3.25 4.68 7.15

4" 8.87 11.29 3.75 5.20 8.17

A A - - -

Port Code(s)Port

Size

Overall

Length

FM/GM

Overall

Length FL

Flg Pad

Long

Flg Pad

Short

UNC Bolt

Thrd

¾"

1"

1¼"

1½"

2"

2½" 10.98 12.73 3.50 2.00 ½"

3" 12.76 15.26 4.19 2.44 e"

4" 14.22 16.72 5.13 3.06 e"

A - - - ACM

Port Code(s)Port

Size

Overall

Length

O-Ring

No.

Length A

(Combo)

¾"

1"

1¼"

1½"

2"

2½" 12.33 2-232 11.66

3" 13.77 2-237 13.27

4" 15.75 2-245 14.98

A - - - -

Port Code(s)Port

Size

Overall

Length

1"

1¼"

1½"

2"

2½" 12.73

3" 15.26

4" 16.72

A - - - -

Port Code(s)Port

Size

Overall

Length

Pipe

OD

Socket

Depth

¾"

1"

1¼"

1½"

2"

2½" 8.97 2.89 0.38

3" 10.66 3.51 0.50

4" 12.12 4.51 0.50


Dimension (inches)

N

S

B

IU

IAThreaded

Connections

SM

CMSAE Split &

Combo Flange

Connections

FSL-2500SK

FSL-3000SK

FSL-4000SK

DMIC Split

Flange Kit

THREADED CONNECTION

Please specify

BVH/BVAH

for small bore

applications

Dimension (inches)

W4Socket Weld

Connections

FM

GM

FLSAE 4-Bolt

Comp/Std

Flg Conn

A*

D*ANSI & DIN

Flange

Connections

ANSI & DIN FLANGE CONNECTION


Dimension (inches)

For complete ANSI and DIN Flange selection

specs, please see the ANSI/DIN tables in the

'BVAH' section.



Dimension (inches)

Dimension (inches)




‘BVAM’ Mid Pressure

‘BVAM’ Service Parts BOM


011 1 Valve Body

021 1 Ball

031 1 Spindle, Steel

041 2 Ball Seal



091 1 Stop Pin

101 1 Stop Washer


121 2 Connection End



162 1 Handle Bolt


201 1 Top Cap O-R (XL sizes only)


BVAM

BVAM Physical ConstructionParameter Mater ial

BODY Steel Body & Endcaps

BALL Steel, Chrome Plated

SPINDLE Steel, Zinc Plated

STD HANDLE Forged Steel, Nickel Plated

BALL SEALS Delrin, optional Teflon and PEEK


TEMP RANGE -22°F to 212°F (-30°/100°C)

LIFE


'HSSW' Possibilities'BVAM' can be configured with Hose Barb,4-Bolt/Split /ANSI Flange, and Swivel SocketWeld connections. You can route mechanicallyrigid 'HSSW' adapters in Inline, 45°, and 90°degree directions with dimensional tolerancespreviously only dreamed of. Also, you caninterchangeably assemble Imperial and Metricstandard power units to the same layoutdimensions. High pressure 'HSSW' adaptersare available in frequently ordered styles.

'BVAM' WITH C.614-BOLT FLANGE

Order 'BVAM' with connectioncode FM to receive Code 61 SAE4-Bolt Companion connections.Order code GM for metric boltholes, or code FL for C.61 Std.Flange (through bolt holes).

'BVAM' C.61SPLIT FLANGE

Order HSSW connection codeSM to receive Code 61 SplitFlange Head connections rated to2000 PSI. Rapid order a SplitFlange kit with suffix /SFK.

SWIVEL SOCKETWELD 'BVAM'

Order connection code W4 toreceive adjustable "swivel"socket weld connections for pipe.HSSW up to 2000 PSI on

DMIC ‘BVAM’ can be equipped with the industry’s widestarray of labor and cost-saving Ball Valve accessories,including:





‘BVAM’ Accessories


‘BVAM’ Mid Pressure

BVAM 1 1**** S

Code Descrip tion

1 Carbon Steel

2 Stainless Steel

Body Material

Code Descrip tion

1 Carbon Steel


11 Code Descrip tion

1 Buna-N (Standard)

2 EPR

3 Viton

O-Ring Material

Code Descrip tion

1 Delrin

2 PTFE Teflon

Ball Seal Material

‘BVAM’ Ordering Codes Summary

‘BVAM’ Performance Curves

'BVAM' Flow Characteristic Curves

Steel Small Valve Sizes, ½" to 1¼"

0

10

20

30

40

50

60

0 50 100 150 200 250

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

0500 0750 1000

1250

'BVAM' Actuation Torque Guidelines

Steel Small Valve Sizes, ½" to 1¼"

0

100

200

300

400

500

0 500 1000 1500 2000


Actu

ati

on

To

rqu

e(i

n*

lbs)

0500

0750

1000

1250

'BVAM' Flow Characteristic Curves

Steel Round Body and XL Valves, 1½" to 4"

0

10

20

30

40

0 100 200 300 400 500 600

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

1500

2000

3000

2500

4000

'BVAM' Actuation Torque Guidelines

Steel Round Body and XL Valves, 1½" to 4"

0

400

800

1200

1600

0 500 1000 1500 2000


Actu

ati

on

To

rqu

e(i

n*

lbs)

2000

2500

1500

3000

4000

Code Desc

S SAE ORB

N NPT

Code Desc

B BSPP

T BSPT - special

Code Desc

IU ISO6149

IA ISO1179


METRIC THREADS

ISO THREADS

DMIC 'BVAM' Ball Valves aremanufactured in imperial “inch”and metric threads.HSSW "composite" valves areconstructed from an (E)SAEO-Ring Threaded valve and'HSSW' adapters. You can specifyany ball valve using HSSW System"2+2" port codes (page 8) andexpect the aggregate product/costto be supplied.

Code Port Size

0250

0375

0500

0750

1000

1250

1500

2000

2500 2½"

3000 3"

4000 4"

5000 5" - Call

6000 6" - Call

Size Codes

Production

quantities

required

for

small

'BVAM'

sizes

in 2001


'BVH' & ‘BVAH’ HighPressure for 6,000 PSIThe benchmark of quality and value ; Made in U.S.A. ;Widest array of sizes, connections, and accessories.

BVH/BVAH

Valve

Width

B

Valve

Bore

C

Handle

Length

D

6000 1.38 0.25 4.50

413.8 34.9 6.4 114.3

6000 1.50 0.38 4.50

413.8 38.1 9.5 114.3

6000 1.63 0.50 4.50

413.8 41.3 12.7 114.3

6000 2.25 0.75 7.00

413.8 57.2 19.1 177.8

6000 2.50 1.00 7.00

413.8 63.5 25.4 177.8

6000 2.50 1.00 7.00

413.8 63.5 25.4 177.8

6000 2.50 1.00 7.00

413.8 63.5 25.4 177.8

6000 3.38 1.25 10.00

413.8 85.7 31.8 254.0

6000 3.75 1.50 10.00

413.8 95.3 38.1 254.0

6000 4.50 2.00 10.00

413.8 114.3 50.8 254.0

6000 6.50 2.50 14.00

413.8 165.1 63.5 355.6

6000 7.50 3.00 14.50

413.8 190.5 76.2 368.3

6000 10.00 4.00 14.50

413.8 254.0 101.6 368.3

Rated

Pressure

PSI

(bar)

Port

Size

Common Dimensions

BVH-0250*-1111 ¼"

Part Number

DIMENSIONS in (mm)

BVAH-1250*-1111

BVH-0375*-1111 d"

BVH-0500*-1111 ½"

BVH-1250*-1111

Restricted to 1"1¼"

BVH-1500*-1111

Restricted to 1"1½"

BVAH-4000*-1111 4"

BVH-0750*-1111 ¾"

BVAH-1500*-1111

BVAH-2000*-1111

BVAH-3000*-1111

BVAH-2500*-1111

1"BVH-1000*-1111

3"

1¼"

1½"

2"

2½"

DMIC ‘BVH’ and 'BVAH' valves set the standard by which other highpressure valves are judged. Obsessive attention to detail and years ofcontinuous refinement have brought the real world performance ofDMIC 'BVH' Block and 'BVAH' round body valves beyond the ordinary.

� Exclusive Spindle-Glide� Design incorporates nylon thrust bearings andSynthetic lube packing to further reduce actuation torque, improve tactilefeel, and help prevent valve seizure even after long-term outdoor exposure

� The latest Delrin Ball Seal formulation lowers actuation torque, optionalSuper Low Friction ball seals for high duty cycle & actuated applications

� Custom Mill Runs of special steel made to DMIC’s specifications resultsin valves of superior material strength, quality, finish, and integrity

� Expanded array of labor-saving DMIC Pre-Engineered Accessories

About ‘BVH’ & 'BVAH'DMIC's ‘BVH’ Block Body and 'BVAH' round body valvesare now unified under the 'BVAH' banner. Like the lowerpressure 'BVAL' and 'BVAM', the 'BVAH' series is available inthree geometries to span our largest production size rangefrom ¼” to 6” unrestricted bore. ‘BVAH’ valves are fullpressure 6,000 PSI steel valves designed for superlativedurability and high duty cycle applications. Please call forlatest specifications of 5" and 6" sizes.

Common DimensionsFor valve length ‘A’ and other specific dimensions, plus sketches of specialtyvalves, please see the Dependent Dimensions tables on page 23 and 24.

BVAH 1¼" to 2"Innovative round body insteel or stainless steelpermits panel & precisionaccessory mtg. Extensiveactuation possibilities. Fastdelivery in stainless steel.

BVH ¼" to 1" (1½")The original DMIC steelsquare body style. The 1¼”and 1½” sizes restricted to1" internal bore. Rated for6000 PSI working pressure.

BVAH 2½" to 4"Bulletproof XL full pressuredesign with unrestrictedbore. The 2½" size is afloating ball design; 3 inchand above utilize areinforced trunnion balldesign. Available withactuation and full array ofaccessories. Made in U.S.A.Max 6000 PSI. Call fordimensions of 5" & 6" sizes.


‘BVH’ & ‘BVAH’ 6000 PSIDependent DimensionsThese are the valve dimensions that vary based on yourselection of a connection style. Some connection stylesprovide additional dimensions to those published at left;please see supplemental sketches next page for moreconfigurations and specs.

Dimensional Sketches‘BVH’ Block Body, ¼” - 1”

‘BVAH’ Round Body, 1¼” - 2”

‘BVAH’ XL Round Body, 2½”(Models 3” and up call Factory for certified print)

BVH/BVAH

A E F G H

Port Code(s)Port

Size

Overall

Length

Overall

Height

Bot to

PortCtr

PortCtr to

Top

Valve

Height

¼" 2.74 2.98 0.61 0.77 1.38

d" 2.87 3.11 0.64 0.86 1.50

½" 3.35 3.23 0.73 0.90 1.63

¾" 3.80 4.70 1.00 1.26 2.25

1" 4.49 4.95 1.14 1.36 2.50

1¼" 5.24 4.95 1.14 1.36 2.50

1½" 5.49 4.95 1.14 1.36 2.50

1¼" 4.84 6.38 1.45 1.81 3.26

1½" 5.33 6.76 1.64 2.00 3.64

2" 6.54 7.42 2.01 2.29 4.30

2½" 7.50 9.81 2.95 3.18 6.13

3" 9.28 12.72 4.43 4.43 8.86

4" 11.21 15.31 5.77 5.67 11.44

A J K

Port Code(s)Port

Size

Overall

Length

Flg Pad

Long

Flg Pad

Short

UNC

BoltThrd

Metric

BoltThrd

½" 4.22 1.50 0.695/16" M8

¾" 4.77 1.88 0.88 d" M10

1" 5.27 2.06 1.03 d" M10

1¼" 6.90 2.31 1.197/16" M10

1½" 7.10 2.75 1.41 ½ " M12

2" 8.06 3.06 1.69 ½" M12

2½" 10.75 3.50 2.00 ½" M12

3" 13.78 4.19 2.44 e" M16

4" 16.21 5.13 3.06 e" M16

A J K

Port Code(s)Port

Size

Overall

Length

Flg Pad

Long

Side

Flg Pad

Short

Side

UNC

BoltThr

Metric

BoltThr

½" 4.22 1.59 0.725/16" M8

¾" 4.77 2.00 0.94 d" M10

1" 5.27 2.25 1.097/16" M12

1¼" 6.90 2.63 1.25 ½ " M14

1½" 7.10 3.12 1.44 e" M16

2" 8.06 3.81 1.75 ¾" M20

A - - - ACM

Port Code(s)Port

Size

Overall

Length

O-Ring

No.

Length A

Combo

½" 5.95 2-210 5.09

¾" 6.38 2-214 5.58

1" 6.99 2-219 6.13

1¼" 7.51 2-222 7.20

1½" 9.09 2-225 8.09

2" 9.11 2-228 8.59

2½" 14.10 2-232 12.43

3" 15.88 2-237 14.83

4" 18.26 2-245 17.44

A - - - ACH

Port Code(s)Port

Size

Overall

Length

O-Ring

No.

Length A

Combo

½" 5.95 2-210 5.09

¾" 6.86 2-214 5.82

1" 7.79 2-219 6.53

1¼" 8.77 2-222 7.83

1½" 11.07 2-225 9.08

2" 12.44 2-228 10.25

L

L

FSL-3000SK

FSL-4000SK

FSL-1250SK

FSL-1500SK

FSL-2000SK

FSL-2500SK

Dependent Dimensions (1 of 3)

Dimension (inches)

N

S

B

IU

IAThreaded

Connections

SH / CHSAE C.62

Split & Combo

FSH-2000SK

DMIC Split

Flange Kit

FSH-0500SK

Dimension (inches)

FH / GH

FKSAE C.62 4B

Comp/Std

Dimension (inches)

FSH-1250SK

Dimension (inches)

DMIC Split

Flange Kit

SM

CM

SAE C.61

Split & Combo

FSL-0500SK

FSL-0750SK

FSL-1000SK

FSH-1500SK

THREADED CONNECTION

SAE C.62 4-BOLT FLANGE CONNECTION

SAE C.62 SPLIT FLANGE CONNECTION

FSH-0750SK

FSH-1000SK

SAE C.61 4-BOLT FLANGE CONNECTIONDimension (inches)

FM

GM

FLSAE C.61 4-Bolt

Comp/Std

Flange

Connections

SAE C.61 SPLIT FLANGE CONNECTION





BVH/BVAH

A G F H J

Port Code(s)Port

Size

Overall

Length

Flange

DiamB/Ctr Diam

Bolt

Hole Dia

# Bolt

Holes

½" To Fit 3.75 2.63 0.63 4

¾" To Fit 4.63 3.25 0.75 4

1" To Fit 4.87 3.50 0.75 4

1¼" To Fit 5.25 3.87 0.75 4

1½" To Fit 6.13 4.50 0.87 4

2" To Fit 6.50 5.00 0.75 8

2½" To Fit 7.50 5.87 0.87 8

3" To Fit 8.25 6.63 0.87 8

4" To Fit 10.00 7.87 0.87 8

A G F H J

Port Code(s)Port

Size

Overall

Length

Flange

DiamB/Ctr Diam

Bolt

Hole Dia

# Bolt

Holes

½" To Fit 3.75 2.63 0.63 4

¾" To Fit 4.63 3.25 0.75 4

1" To Fit 4.87 3.50 0.75 4

1¼" To Fit 5.25 3.87 0.75 4

1½" To Fit 6.13 4.50 0.87 4

2" To Fit 6.50 5.00 0.75 8

2½" To Fit 7.50 5.87 0.87 8

3" To Fit 8.25 6.63 0.87 8

4" To Fit 10.75 8.50 1.00 8

A G F H J

Port Code(s)Port

Size

Overall

Length

Flange

DiamB/Ctr Diam

Bolt

Hole Dia

# Bolt

Holes

½" To Fit 4.75 3.25 0.87 4

¾" To Fit 5.13 3.50 0.87 4

1" To Fit 5.87 4.00 1.00 4

1¼" To Fit 6.25 4.37 1.00 4

1½" To Fit 7.00 4.87 1.13 4

2" To Fit 8.50 6.50 1.00 8

2½" To Fit 9.63 7.50 1.13 8

3" To Fit 9.50 7.50 1.00 8

4" To Fit 11.50 9.25 1.25 8

A G F H J

Port Code(s)Port

Size

Overall

Length

Flange

DiamB/Ctr Diam

Bolt

Hole Dia

# Bolt

Holes

½" To Fit 4.75 3.25 0.87 4

¾" To Fit 5.13 3.50 0.87 4

1" To Fit 5.87 4.00 1.00 4

1¼" To Fit 6.25 4.37 1.00 4

1½" To Fit 7.00 4.87 1.13 4

2" To Fit 8.50 6.50 1.00 8

2½" To Fit 9.63 7.50 1.13 8

3" To Fit 10.50 8.00 1.25 8

4" To Fit 12.25 13.44 1.37 8

A G F H J

Port Code(s)Port

Size

Overall

Length

Flange

DiamB/Ctr Diam

Bolt

Hole Dia

# Bolt

Holes

½" To Fit 5.25 3.50 0.87 4

¾" To Fit 5.50 3.75 0.87 4

1" To Fit 6.25 4.25 1.00 4

1¼" To Fit 7.25 5.13 1.13 4

1½" To Fit 8.00 5.75 1.25 4

2" To Fit 9.25 6.75 1.13 8

2½" To Fit 10.50 7.75 1.25 8

3" To Fit 12.00 9.00 1.37 8

4" To Fit 14.00 10.75 1.63 8

ANSI CLASS 150# CONNECTIONSee 'BVAL' model (page 15) for ANSI Class 150# valves & flange dimensions

ANSI CLASS 2500# CONNECTIONDimension (inches)


ACANSI Class 600(1500 PSI Nom.)


ADANSI Class 900(2250 PSI Nom.)

ABANSI Class 300(750 PSI nominal)

AFANSI Cls. 2500(6300 PSI Nom.)


AEANSI Cls. 1500(3750 PSI Nom.)

Dimension (inches)


ANSI CLASS 300# CONNECTION

These are the valve dimensions that vary based on your selection of aconnection style. Please see supplemental sketches on the next page for arepresentative drawing and extra tabular dimensions which define yourselected connection style.

BVH/BVAH

A J K

Port Code(s)Port

Size

Overall

Length

Pipe

OD

Socket

Depth

½" 6.26 0.84 0.75

¾" 7.46 1.05 0.75

1" 7.66 1.32 1.00

1¼" 8.40 1.66 1.00

1½" 9.46 1.90 1.00

2" 10.60 2.88 1.00

A G F H J

Port Code(s)Port

SizeLength

Flange

Diam

Bolt Ctr

DiamBolt Hole

# Bolt

Holes

15mm (½") To Fit 95.0 65.0 14.0 4

20mm (¾") To Fit 105.0 75.0 14.0 4

25mm (1") To Fit 115.0 85.0 14.0 4

32mm (1¼") To Fit 140.0 100.0 18.0 4

40mm (1½") To Fit 150.0 110.0 18.0 4

50mm (2") To Fit 165.0 125.0 18.0 4

65mm (2½") To Fit 185.0 145.0 18.0 8

80mm (3") To Fit 200.0 160.0 18.0 8

100mm (4") To Fit 220.0 180.0 18.0 8

A G F H J

Port Code(s)Port

SizeLength

Flange

Diam

Bolt Ctr

DiamBolt Hole

# Bolt

Holes

15mm (½") To Fit 105.0 75.0 14.0 4

25mm (1") To Fit 140.0 100.0 18.0 4

40mm (1½") To Fit 170.0 125.0 22.0 4

50mm (2") To Fit 195.0 145.0 26.0 4

A G F H J

Port Code(s)Port

SizeLength

Flange

Diam

Bolt Ctr

DiamBolt Hole

# Bolt

Holes

15mm (½") To Fit 105.0 75.0 14.0 4

25mm (1") To Fit 140.0 100.0 18.0 4

40mm (1½") To Fit 170.0 125.0 22.0 4

50mm (2") To Fit 195.0 145.0 26.0 4

A G F H J

Port Code(s)Port

SizeLength

Flange

Diam

Bolt Ctr

DiamBolt Hole

# Bolt

Holes

15mm To Fit 105.0 75.0 14.0 4

25mm To Fit 140.0 100.0 18.0 4

40mm To Fit 170.0 125.0 22.0 4

50mm To Fit 195.0 145.0 26.0 4

A G F H J

Port Code(s)Port

SizeLength

Flange

Diam

Bolt Ctr

DiamBolt Hole

# Bolt

Holes

15mm To Fit 130.0 90.0 18.0 4

25mm To Fit 150.0 105.0 22.0 4

40mm To Fit 185.0 135.0 26.0 4

50mm To Fit 200.0 150.0 26.0 8

A G F H J

Port Code(s)Port

SizeLength

Flange

Diam

Bolt Ctr

DiamBolt Hole

# Bolt

Holes

15mm To Fit 130.0 90.0 18.0 4

25mm To Fit 160.0 115.0 22.0 4

40mm To Fit 195.0 145.0 26.0 4

50mm To Fit 210.0 160.0 26.0 8

A G F H J

Port Code(s)Port

SizeLength

Flange

Diam

Bolt Ctr

DiamBolt Hole

# Bolt

Holes

15mm To Fit 145.0 100.0 22.0 4

25mm To Fit 180.0 130.0 26.0 4

40mm To Fit 220.0 165.0 30.0 4

50mm To Fit 235.0 180.0 30.0 8

Dimension (mm)

DEDIN Class 250

DIN FLANGE PN160 - 160 BAR

DGDIN Class 400

Dimension (mm)

DCDIN Class 100(1500 PSI Nom.)

DIN FLANGE PN10/16 - 16 BARDimension (mm)

DADIN Class 16

(240 PSI Nom.)

Supplied on

'BVAL' series

DIN FLANGE PN63/100 - 100 BAR

FIXED SOCKET WELD CONNECTIONDimension (inches)

DFDIN Class 315

DIN FLANGE PN400 - 400 BARDimension (mm)

DIN FLANGE PN315 - 315 BARDimension (mm)

DDDIN Class 160(2400 PSI Nom.)

Dimension (mm)

DIN FLANGE PN250 - 250 BAR

DBDIN Class 40(600 PSI Nom.)

W4Socket Weld

Connections


DIN FLANGE PN25/40 - 40 BARDimension (mm)

A E J K

P o rt C o de(s )P o rt

S ize

O vera ll

Leng th

O vera ll

H e igh t

J IC Thrd

D ep th

J IC Thrd

P itch

d " 2.94 2.98 0.55 9/16-20

½ " 3.35 3.11 0.65 3/4-16

¾ " 4.31 3.23 0.86 1-1/16-12

1" 4.97 4.70 0.91 1-5/16-12

1¼ " 5.72 4.95 0.95 1-5/8-12

1½ " 6.47 6.38 1.16 1-7/8-12

2" 7.79 6.76 1.38 2-1/2-12

D im ens io n (inches)

JJIC M ale

Connections

J IC -M (37° FLA R E ) C O N N E C TIO N

‘BVH’ & ‘BVAH’ 6000 PSI



BVH/BVAH Physical ConstructionParameter Mater ial






O-RINGS O-Ring + BU, Buna-N std.

TEMP RANGE -22°F to 212°F (-30°/100°C)

LIFE


Supplemental Sketches

SAE SPLIT FLANGE HEAD

SAE 4-BOLT & SPLIT "COMBO" FLANGE

ANSI & DIN FLANGE

Old New Old New

Code Code Code Code

150# -01 AA 16 Bar .P016 DA

300# -03 AB 40 Bar .P040 DB

600# -06 AC 100 Bar .P100 DC

900# -09 AD 160 Bar .P160 DD

1500# -15 AE 315 Bar .P315 DE

2500# -25 AF 400 Bar .P400 DF

DIN Order Code XrefDIN

Class

ANSI Order Code XrefANSI

Class

DMIC ‘BVH’ and ‘BVAH’ can be equipped with theindustry’s widest array of labor and cost-saving BallValve accessories, including:

� Locking Handles, OSHA type and Security� Limit Switch Brackets, with one of two switches,




‘BVH/AH’ Accessories

JIC 37 DEGREE FLARE

FIXED SOCKET WELD

SAE 4-BOLT FLANGE (COMP & STD)


‘BVH’ & ‘BVAH’ 6000 PSI‘BVH’ and ‘BVAH’ Performance Curves

'BVH' & 'BVAH' Flow Char. Curves


0

10

20

30

40

50

60

0 50 100 150 200 250

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

0500 0750 1000

1250

03750250

'BVH'/'BVAH' Actuation Tq Guidelines


0

250

500

750

1000

1250

1500

0 1000 2000 3000 4000 5000 6000


Actu

ati

on

To

rqu

e(i

n*

lbs)

0375

0750

1000

1250

0250

0500

'BVAH' Flow Characteristic Curves


0

10

20

30

40

0 100 200 300 400 500 600

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

1500

2000

3000

2500

4000

'BVAH' Actuation Torque Guidelines


0

500

1000

1500

2000

2500

3000

0 1000 2000 3000 4000 5000 6000


Actu

ati

on

To

rqu

e(i

n*

lbs)

2000

2500

1500

3000

4000

‘BVH’ and ‘BVAH’ Service Parts BOM


011 1 Valve Body

021 1 Ball

031 1 Spindle, HP Steel

04* 2 Ball Seal

171 2 Connection Backup



081 1 Spindle Backup

091 1 Stop Pin

101 1 Stop Washer


121** 2 Connection End



162 1 Handle Bolt



BVH/BVAH

Available inStainless Steel


Code Desc Code Desc

S SAE ORB FM SAE C61 Comp UNC

N NPT FH SAE C62 Comp UNC

MJ JIC-M GM SAE C61 Comp Metric

GH SAE C62 Comp Metric

B BSPT - special

T BSPT - special SM SAE C61 Split Flg Head

D* DIN Tube - call SH SAE C62 Split Flg Head

IU ISO6149 FL SAE C61 Std UNC/Metric

IA ISO1179 FK SAE C62 Std UNC/Metric

Please see page 9 for complete connection availability matrix

Thread ConnectionsIMPERIAL THREADS

METRIC THREADS

SAE 4-BOLT STANDARDISO THREADS

SAE Flange ConnSAE 4-BOLT COMPANION

SAE SPLIT FLANGES

Code Descrip tion

1 Buna-N (Standard)

2 EPR

3 Viton

4 DMIC Hi-Temp

O-Ring Material

Code Descrip tion

1 Delrin

2 PTFE Teflon

4 High Temperature

6 Super Low Friction

9 Hostile Media

Ball Seal Material

'BVH' and ‘BVAH’ Ordering Codes Summary

BVAH 1**** IU 111


Code Descrip tion

1 Carbon Steel

2 Stainless Steel

Body Material

Code Descrip tion

1 Carbon Steel

2 Stainless Steel


Code Port Size

0250 ¼"

0375 d"

0500 ½"

0750 ¾"

1000 1"

1250 1¼"

1500 1½"

'BVH'

Size Codes Code Port Size

1250 1¼"

1500 1½"

2000 2"

2500 2½"

3000 3"

4000 4"

5000 5" - Call

6000 6" - Call

'BVAH'

Size Codes

Code Port Size

BVH Block Body

BVAH Round Body

Series

Please see theexpanded section on

Construction Materialsand

DMIC Pre-EngineeredAccessories,pages 10-13.


‘BVHH’ 10/15,000 PSINext generation design substantially strengthened fordurability and safety factor ; ½" to 2"Due to our policy of continual product imprevement specifications may change without notice.

BVHH

Valve

Width

B

Valve

Bore

C

Handle

Length

D

15000

1034.5

15000

1034.5

15000

1034.5

15000

1034.5

15000

1034.5

15000

1034.5

15000

1034.5

15000

1034.5

Common Dimensions

BVHH-0250*-1111 ¼"

Part Number

DIMENSIONS in (mm)Rated

Pressure

PSI

(bar)

Port

Size

BVHH-0375*-1111 d"

Under

revision

Please call

DMIC

Not available,

series starts at 1/2"

BVHH-2000*-1111 2"

BVHH-0750*-1111 ¾"

BVHH-1500*-1111 1½"

1"BVHH-1000*-1111

1¼"

½"

BVHH-1250*-1111

BVHH-0500*-1111

Now offered for 10,000 PSI standard and optional 15,000 PSI.When human life or irreplaceable equipment is at stake, only the bestwill do. DMIC’s ‘BVHH’ represents our commitment to the finestEngineering and Manufacturing technologies to produce a product ofunparalleled excellence in the worldwide ball valve marketplace.

� You can’t buy a stronger production ball valve than ‘BVHH’� Full metal Ball Seals and heavy duty construction, superior to traditional

ball seal ring reinforcement designs ; Assures shutoff capability� Individually certified at factory for rated pressure� Accepts many standard DMIC Accessories and a selection of custom

'BVHH' Valve Options including two stage actuation� Standard Buna-N sealing, buyer may substitute Viton or EPR at no charge

About ‘BVHH’ SeriesNew for 2003 !

DMIC is revising this product line. Please call toll-free forlatest specifications and pricing.

ProductionRamp-Up for 'BVHH'If you've done business with DMIC, you know thatwe will decline a nice order before we ship productthat is not up to our standard of quality. Asproduction ramps for this series, some sizes mayrequire leadtime.Please call DMIC at 1-800-248-3642 to confirmspecifications and delivery timeframe beforespecifying or quoting a 'BVHH' valve to your customer.

Common DimensionsThe following specifications are common to all ‘BVHH’ seriesvalves regardless of connection style. For valve length ‘A’ andother specific dimensions, please call the DMIC Factory at1-800-248-3642.

Due to the nature of this product, DMIC does not recommend theuse of connection adapters with 'BVHH'. Additionally, only topquality fluid connectors must be used with 'BVHH' valves.


‘BVHH’ 10/15,000 PSI

BVHH 1 1**** IU

Code Descrip tion

1 Carbon Steel

2 Stainless Steel

Body MaterialCode Descrip tion

1 Carbon Steel

2 Stainless Steel


11Code Descrip tion

1 Buna-N (Standard)

2 EPR

3 Viton

4 DMIC Hi-Temp

O-Ring Material

Code Descrip tion

1 DMIC Full Metal Seals

2 PTFE (downrate to 1500 PSI )

3 Peek (call Factory)

4 High Temp (call Factory)

6 Super LoFric (call Factory)

Ball Seal Material

‘BVHH’ Ordering Codes Summary

‘BVHH’ Performance Curves

'BVHH' Flow Characteristic Curves


0

10

20

30

40

50

60

0 50 100 150 200 250

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

0500 0750 1000

1250

03750250

'BVHH' Actuation Torque Guidelines

Small Valve Sizes, ¼" to 1"

0

500

1000

1500

2000

2500

3000

0 2500 5000 7500 10000 12500 15000


Actu

ati

on

To

rqu

e(i

n*

lbs)

'BVHH' Flow Characteristic Curves

Large Valve Sizes, 1½" to 2"

0

10

20

30

40

0 100 200 300 400 500 600

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

1500

2000

3000

2500

4000

'BVHH' Actuation Torque Guidelines

Large Bore Valves, 1¼" to 2"

0

500

1000

1500

2000

2500

3000

0 2500 5000 7500 10000 12500 15000


Actu

ati

on

To

rqu

e(i

n*

lbs)

Code Port Size

0500 ½"

0750 ¾"

1000 1"

1250 1¼"

1500 1½"

2000 2"

BVHH'

Size Codes

Code Desc

S SAE ORB

N NPT

Code Desc

B BSPP

T BSPT - special

Code Desc

IU ISO6149

IA ISO1179


METRIC THREADS

ISO THREADS


‘BV3D’ Steel DiverterThe smart alternative to “converted 2-way” diverters;Rated for 3,000 PSI; Sizes from ¼" to 2" NPT/SAE/BSPDesigned as an "L-Bore" diverter, optional "Near Zero Leakage" sealing.

BV3D

Width

P1 ( Thrd )

B

Valve

Bore

C

Handle

Length

D

3000 2.05 0.25 4.50

206.9 52.1 6.4 114.3

3000 2.11 0.31 4.50

206.9 53.5 8.0 114.3

3000 2.38 0.44 4.50

206.9 60.4 11.1 114.3

3000 2.95 0.69 7.00

206.9 74.9 17.4 177.8

3000 3.46 0.88 7.00

206.9 87.9 22.2 177.8

3000 4.54 1.13 10.00

206.9 115.2 28.6 254.0

3000 5.18 1.38 10.00

206.9 131.6 34.9 254.0

3000 6.30 1.75 10.00

206.9 160.1 44.5 254.0BV3D-2000**-1111 2"

BV3D-0750**-1111 ¾"

BV3D-1500**-1111

1"BV3D-1000**-1111

1¼"

1½"

BV3D-1250**-1111

BV3D-0375**-1111 d"

BV3D-0500**-1111 ½"

Rated

Pressure

PSI

(bar)

Port

Size

Common Dimensions

BV3D-0250**-1111 ¼"

Part Number

DIMENSIONS in (mm)

The genuine DMIC ‘BV3D’ is a 3-way, “L-bore” diverter derived from theDMIC ‘BVH’. DMIC’s newest high-end CNC equipment andadvancements in manufacturing tolerance control allow the ‘BV3D’ tosatisfy many 3-way applications, providing a cost savings relative to atrue 3-way valve. Consult DMIC Engineering for more information.

� Stocked with “L-Bore” standard ball; special “T-Bore” option available� Slight port overlap prevents surprise upstream blowouts during shifting� DMIC’s Innovative Spindle-Glide™ Design reduces actuation torque &

increases valve longevity, especially under actuation� Every size can be Panel & Substrate Mounted, using stock brackets� Optional Skydrol, High Temp, Near Zero leakage configurations� New for 2001 - Near zero leakage ‘BV3DZ’ model !

Common DimensionsThe following specifications are common to all ‘BV3D’ series valvesregardless of connection style. For valve length ‘A’ and other specificdimensions, please see Dependent Dimensions table adjacent page.

'BV3D' is manufactured in threaded styles only but can be factory equippedwith 'HSSW' System (HP) adapters to achieve Split & 4-Bolt Flange, SocketWeld, ANSI Class/DIN Flange, and Hose Barb Connection(s) on one ormore ports. We provide dimensions for common 3-like port valves in theDependent Dimension tables, but this product is highly suited to customizationand we invite you to call your Distributor or DMIC for application assistance.

About ‘BV3D’/‘BV3DZ’DMIC's ‘BV3D’ replaces "converted 2-way" valveswith welded 3rd ports, eliminating a source ofleakage and providing flexible connection options.

Derived from the field proven DMIC 'BVH' series,this full bore diverter is rated to 3000 PSI and isfully compatible with DMIC options andaccessories. The ‘BV3DZ’ model utilizes DMIC’sinnovative internal design for near zero internalleakage and unrestricted port pressurization.

Q: Can I use aDiverter Valveor do I need aTrue Multi-WayValve ?”

The ‘BV3DZ’ version of ourdiverter valve can take the place ofa true multiway valve in manycircuits.

Specifically, the question youmust ask your application is: “Ispressure ever applied at port 2 or3 when valve is blocked ?”.

If YES, you must use a “real”3-way valve, or the ‘BV3DZ’model. If NO, a Diverter such as‘BV3D’ or ‘BV3L’ is acceptable.


‘BV3D’ Steel DiverterDependent DimensionsThese are the valve dimensions that vary based on yourselection of a connection style. Some connection stylesprovide additional dimensions to those published at left;see supplemental sketches next page.

‘BV3D’ valves with flange and socket weldconnections are composite valves, built usingthreaded valves and ‘HSSW’ adapters.To harness the full capabilities of DMIC’s ‘SSW’ PowerUnit Layout system please call DMIC Helpline at1-800-248-3642 to obtain the Designer’s Guide.


BV3D

A E F G H

Port Code(s)Port

Size

Length

Ports 2-3

Overall

Height

Bot to Port

Ctr

PortCtr to

Top

Back to

2-3 Ctrln

¼" 2.74 2.98 0.61 0.77 0.60

d" 2.87 3.11 0.64 0.86 0.61

½" 3.35 3.23 0.73 0.90 0.67

¾" 3.80 4.70 1.00 1.26 0.93

1" 4.49 4.95 1.14 1.36 1.03

1¼" 4.84 6.37 1.44 1.81 1.38

1½" 5.33 6.62 1.50 2.00 1.63

2" 6.54 7.37 1.96 2.29 2.00

AFM AFL E F G

Port Code(s)Port

Size

Length

Ports 2-3

Length

Ports 2-3

Overall

Height

Bot to Port

Ctr

PortCtr to

Top

½" 4.22 Call 3.23 0.73 0.90

¾" 4.77 Call 4.70 1.00 1.26

1" 5.27 Call 4.95 1.14 1.36

1¼" 6.90 Call 6.37 1.44 1.81

1½" 7.10 Call 6.62 1.50 2.00

2" 8.05 Call 7.37 1.96 2.29

A E F G ACM

Port Code(s)Port

Size

Length

Ports 2-3

Overall

Height

Bot to Port

Ctr

PortCtr to

Top

Length A

(Combo)

½" 5.95 3.23 0.73 0.90 5.09

¾" 6.39 4.70 1.00 1.26 5.53

1" 7.00 4.95 1.14 1.36 6.22

1¼" 7.51 6.37 1.44 1.81 6.57

1½" 9.07 6.62 1.50 2.00 7.06

2" 9.11 7.37 1.96 2.29 8.27

- - - - -

Port Code(s)Port

Size

½"

¾"

1"

1¼"

1½"

2"

A E F G -

Port Code(s)Port

Size

Length

Ports 2-3

Overall

Height

Bot to Port

Ctr

PortCtr to

Top

½" 6.26 3.23 0.73 0.90

¾" 6.70 4.70 1.00 1.26

1" 7.40 4.95 1.14 1.36

1¼" 7.75 6.37 1.44 1.81

1½" 8.24 6.62 1.50 2.00

2" 9.45 7.37 1.96 2.29


Dimension (inches)

N

S

B

IU / IAThreaded

Connections

SM

CMSAE Split &

Combo Flg Conn

Dimension (inches)

THREADED CONNECTION


For complete ANSI and DIN Flange selection specs, please

see the ANSI/DIN tables in the 'BVAH' section.

Dimension (inches)

W4Socket Weld

Connections

FM / GM

FLSAE 4-B Comp/Std

Flange Conn

A*

D*ANSI & DIN

Flange

Connections


FIXED SOCKET WELD CONNECTION

Dimension (inches)


Dimension (inches)

Made inU.S.A.

Hecho enUSA

Fabriquéeaux E.U.

'BV3D' Steel DiverterBall Pattern Schematic

NOTE: The 'BV3D' is intended by DMIC to be a highquality and economical product offering withstandard L-bore ball pattern. For override to "C"or "D" ball pattern on 'BV3D' an OEM productionorder quantity may be required. Please call DMIC




‘BV3D’ Steel Diverter

‘BV3D’ Service Parts BOM


011 1 Valve Body

021A 1 L-Bore Ball, Code A, see table


041 2 Ball Seal, Delrin

171 1 Connection BU Ring (1¼" & up)



081 1 Spindle Backup Ring

091 1 Stop Pin

101 1 Stop Washer


121** 3 Connection End, add code



162 1 Handle Bolt

BV3D

BV3D Physical ConstructionParameter Mater ial







TEMP RANGE -22°F to 212°F (-30°/100°C)

LIFE


Available inStainless Steel

'HSSW' Possibilities'BV3D' can be configured with Hose Barb,4-Bolt/Split /ANSI Flange, and Swivel SocketWeld connections. You can route mechanicallyrigid 'HSSW' adapters in Inline, 45°, and 90°degree directions with dimensional tolerancespreviously only dreamed of. Also, you caninterchangeably assemble Imperial and Metricstandard power units to the same layoutdimensions. High pressure 'HSSW' adaptersare available in frequently ordered styles, rated for 3,000 PSI .

C.61 4-BOLT FLANGEOrder 'HFMC' adapter to receive Code61 SAE 4-Bolt Companionconnections. Order 'HFMM' forStandard Flange (through bolt holes).

C.61 SPLIT FLANGEOrder 'HSFM' adapter to convert toconnection code SM (C.61 Split FlangeHead). Rated to 3000 PSI. Rapid ordera Split Flange kit with suffix /SFK.

FIXED SOCKET WELDOrder 'HFSW' adapter (convertsthreaded port to equivalent ofconnection code W4) to receive"fixed" socket weld connections forpipe. HSSW adapters rated to lesserof 3000 PSI or valve rated PSI.


Optional Near ZeroLeakage VersionNew for 2001 ! DMIC’s design leadership now allows usto furnish the ‘BV3D’ Diverter with near-zero leakage - anindustry exclusive that saves money and weight.

If you are using atrue multiway valve,call DMIC and let us“show you themoney” you mightsave with ‘BV3DZ’.


‘BV3D’ Steel Diverter

Code Descrip tion

1 Carbon Steel

2 Stainless Steel

Body Material

‘BV3D’ Ordering Codes Summary

‘BV3D’ Performance Curves

'BV3D' Flow Characteristic Curves

3 Port Block Body, ¼" to 1" (input at Port 1)

0

10

20

30

40

50

60

0 10 20 30 40 50 60 70 80 90 100

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

0250 0375 0500 0750

1000

'BV3D' Actuation Torque Guidelines


0

250

500

0 500 1000 1500 2000 2500 3000


Actu

ati

on

To

rqu

e(i

n*

lbs)

0375

0750

1000

0250

0500

'BV3D' Flow Characteristic Curves

3 Port Block Body, 1¼" to 2" (input at Port 1)

0

10

20

30

40

50

60

0 50 100 150 200 250 300 350 400 450 500

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

1500

2000

1250

'BV3D' Actuation Torque Guidelines

Large 3-Way Diverter Valves, 1¼" to 2" (2½"-4" special)

0

500

1000

1500

2000

0 500 1000 1500 2000 2500 3000


Actu

ati

on

To

rqu

e(i

n*

lbs)

2000

2500

1500

3000

4000

1250

BV3D 1 1**** S 11Code Port Size

0250 ¼"

0375 d"

0500 ½"

0750 ¾"

1000 1"

1250 1¼"

1500 1½"

2000 2"

Size Codes

Code Desc Code Desc

S SAE ORB FM SAE C61 Comp UNC

N NPT FH SAE C62 Comp UNC

MJ JIC-M GM SAE C61 Comp Metric

GH SAE C62 Comp Metric

B BSPT - special

T BSPT - special SM SAE C61 Split Flg Head

D* DIN Tube - call SH SAE C62 Split Flg Head

IU ISO6149 FL SAE C61 Std UNC/Metric

IA ISO1179 FK SAE C62 Std UNC/Metric

Please see page 9 for complete connection availability matrix


METRIC THREADS

SAE 4-BOLT STANDARDISO THREADS

SAE Flange ConnSAE 4-BOLT COMPANION

SAE SPLIT FLANGES

A

Code Descrip tion

A L-Bore Diverter

C T-Bore, 90° Action

D T-Bore, 180° Action

Ball Pattern

Code Descrip tion

1 Carbon Steel

2 Stainless Steel


Code Descrip tion

1 Delrin

2 PTFE Teflon

3 Peek

4 High Temperature


Ball Seal Material

Code Descrip tion

1 Buna-N (Standard)

2 EPR

3 Viton

4 DMIC Hi-Temp

O-Ring Material


‘BV3L’ 400 PSI DiverterPremium Quality 3-Way Aluminum Diverter ValveStandard PTFE Ball Seals ; L-Bore ; Sizes from ¼" to 2"Designed as an "L-Bore" diverter, optional "Near Zero Leakage" sealing.

BV3L

Width

P1 ( T hrd )

B

Valve

Bore

C

Handle

Length

D

400 2.25 0.25 3.37

27.6 57.2 6.4 85.5

400 2.25 0.31 3.37

27.6 57.2 7.9 85.5

400 2.25 0.44 3.37

27.6 57.2 11.2 85.5

400 2.81 0.69 5.12

27.6 71.5 17.5 130.0

400 3.19 0.79 5.12

27.6 81.0 20.1 130.0

400 3.88 1.06 6.81

27.6 98.4 26.9 173.0

400 4.08 1.34 6.81

27.6 103.5 34.0 173.0

400 5.13 1.69 6.81

27.6 130.2 42.9 173.0

Rated

Pressure

PSI

(bar)

Port

Size

Common Dimensions

BV3L-0250**-4321 ¼"

Part Number

DIMENSIONS in (mm)

BV3L-0375**-4321 d"

BV3L-0500**-4321 ½"

BV3L-2000**-4321 2"

BV3L-0750**-4321 ¾"

BV3L-1500**-4321

1"BV3L-1000**-4321

1¼"

1½"

BV3L-1250**-4321

The ‘BV3L’ is an economical U.S. made diverter valve for FilterDuplexing type applications where one input is directed to one of twooutputs. Standard “L-Bore” ball with slight port overlap preventsupstream pressure spikes during phase change.

� Straight, non-spherical ball passage improves laminar flow

� Large “L-bore” standard ball porting for low �P & improved Cv

� Engineered for reliable operation in hydraulic return line applications� Derived from field-proven 'BVAL' for 400 PSI service, Made in U.S.A.� Teflon™ (PTFE) Ball Seals for wide fluid applicability� Accepts full array of DMIC Pre-Engineered Accessories� Fully serviceable o-ring sealed design, optional EPR for Skydrol systems� New for 2001 - Near zero leakage ‘BV3LZ’ model !

About ‘BV3L’ SeriesDMIC's ‘BV3L’ serves the quality oriented OEM byeliminating an internally marginal and/or "cheap"brass diverter valve from the failure loop.

Derived from the acclaimed DMIC 'BVAL' series,this full bore L-bore diverter is rated to 400 PSI andfeatures full compatibility with DMIC options.

The ‘BV3LZ’ model utilizes DMIC’s innovativeinternal design for near zero internal leakageand unrestricted port pressurization.

Common DimensionsThe following specifications are common to all ‘BV3L’ series valvesregardless of connection style. For valve length ‘A’ and other specificdimensions, please see Dependent Dimensions table adjacent page.

'BV3L' is manufactured in threaded styles only but can be factory equippedwith 'SSW' System adapters to achieve Split & 4-Bolt Flange, Socket Weld,ANSI Class 150/DIN Flange, and Hose Barb Connection(s) on one or moreports. We provide dimensions for common 3-like port valves in the DependentDimension tables, but this product is highly suited to customization and weinvite you to call your Distributor or DMIC for application assistance.

Q: Can I use aDiverter Valveor do I need aTrue Multi-WayValve ?”

The ‘BV3DZ’ version of ourdiverter valve can take the place ofa true multiway valve in manycircuits.

Specifically, the question youmust ask your application is: “Ispressure ever applied at port 2 or3 when valve is blocked ?”.

If YES, you must use a “real”3-way valve, or the ‘BV3LZ’model. If NO, a Diverter such as‘BV3D’ or ‘BV3L’ is acceptable.


‘BV3L’ 400 PSI DiverterDependent DimensionsThese are the valve dimensions that vary based on yourselection of a connection style. Some connection stylesprovide additional dimensions to those published at left;see supplemental sketches next page.

‘BV3L’ valves with flange and socket weld connectionsare composite valves, built using threaded valves and‘SSW’ adapters.

To harness the full capabilities of DMIC’s ‘SSW’ PowerUnit Layout system please call DMIC Helpline at1-800-248-3642 to obtain the Designer’s Guide.


'BV3L' for 400 PSI BallPattern Schematic

NOTE: The 'BV3L' is intended by DMIC to be a highquality yet economical product offering withstandard L-bore ball pattern. For override to "C"or "D" ball pattern on 'BV3L' an OEM productionorder quantity is required. Please call DMIC

Made inU.S.A.

Hecho enUSA

Fabriquéeaux E.U.

BV3L

A E F G H

Port Code(s)Port

Size

Overall

Length

Overall

Height

Bot to Port

Ctr

PortCtr to

Top

Back to

2-3 Ctrln

¼" 2.63 2.59 0.63 1.31 0.63

d" 2.63 2.59 0.63 1.31 0.63

½" 2.63 2.59 0.63 1.31 0.63

¾" 3.28 3.79 0.76 1.43 0.75

1" 3.48 4.02 0.88 1.56 0.88

1¼" 3.90 5.13 1.15 2.12 1.15

1½" 4.32 5.63 1.42 2.36 1.42

2" 4.90 6.25 1.74 2.65 1.74

AFM AFL E F G

Port Code(s)Port

Size

Overall

Length

Overall

Length

Overall

Height

Bot to

Port Ctr

PortCtr to

Top

¾" 7.65 8.78 8.78 0.76 1.43

1" 7.85 9.09 9.09 0.88 1.56

1¼" 8.50 9.76 9.76 1.15 2.12

1½" 8.92 10.68 10.56 1.42 2.36

2" 9.52 11.15 11.15 1.74 2.65

A E F G ACM

Port Code(s)Port

Size

Overall

Length

Overall

Height

Bot to Port

Ctr

PortCtr to

Top

Length A

(Combo)

¾" 8.08 3.77 0.76 1.43 7.86

1" 8.28 4.02 0.88 1.56 8.06

1¼" 9.34 5.11 1.15 2.12 8.92

1½" 9.76 5.60 1.42 2.36 9.34

2" 10.84 6.27 1.74 2.65 10.18

- - - - -

Port Code(s)Port

Size

1"

1¼"

1½"

2"

A E F G -

Port Code(s)Port

Size

Overall

Length

Overall

Height

Bot to Port

Ctr

PortCtr to

Top

¾" 5.78 3.77 0.76 1.43

1" 5.98 4.02 0.88 1.56

1¼" 6.65 5.11 1.15 2.12

1½" 7.07 5.60 1.42 2.36

2" 7.65 6.27 1.74 2.65

Dimension (inches)

W4Socket Weld

Connections

FM / GM

FLSAE 4-B Comp/Std

Flange Conn

A* / D*ANSI & DIN

Flange



Dimension (inches)


Dimension (inches)

For complete ANSI and DIN Flange selection specs,

please see the 'BVAH' section. Because 'BV3L' is a low

pressure valve DMIC offers

only ANSI Class 150

as a 'BV3L' option.


Dimension (inches)

N

S

B

IU / IAThreaded

Connections

SM

CMSAE Split &

Combo Flg Conn

Dimension (inches)

THREADED CONNECTION





‘BV3L’ 400 PSI Diverter

‘BV3L’ Service Parts BOM


014 1 Valve Body, Aluminum

023A 1 L-Bore Ball, Code A, see table

033 1 Spindle, Brass

042 2 Ball Seal, Teflon



091 1 Stop Pin

101 1 Stop Washer


124** 3 Connection End, add code



162 1 Handle Bolt

BV3L

BV3L Physical ConstructionParameter Mater ial

BODY Aluminum Body & Connections

BALL Brass, Chrome Plated

SPINDLE Brass

STD HANDLE Forged Aluminum, Anodized

BALL SEALS Teflon, optional High Temperature


TEMP RANGE -22°F to 212°F (-30°/100°C)

LIFE


'SSW' Possibilities'BV3L' from ¾" to 2" size can be configured withHose Barb, 4-Bolt/Split /ANSI Flange, andSwivel Socket Weld connections. You can routemechanically rigid 'SSW' adapters in Inline, 45°,and 90° degree directions with dimensionaltolerances previously only dreamed of. Also, youcan interchangeably assemble Imperial andMetric standard power units to the same layoutdimensions. Please see Page 8 for an exampleof customizing 'BV3L' Ball Valve connections using "2+2 codes".

'BV3L' WITH C.614-BOLT FLANGE

Order 'BV3L' with connectioncode FM to receive Code 61 SAE4-Bolt Companion connections.Order code GM for metric boltholes, or code FL for C.61 Std.Flange (through bolt holes).

'BV3L' C.61SPLIT FLANGE

Order connection code SM toreceive Code 61 Split FlangeHead connections rated to 400PSI. Rapid order a Split Flange kitwith suffix /SFK.

SWIVEL SOCKETWELD 'BV3L'

Order connection code W4 toreceive adjustable "swivel"socket weld connections for Sch.40 pipe. Rated to 400 PSI.

DMIC ‘BV3L’ can be equipped with the industry’s widestarray of labor and cost-saving Ball Valve accessories,including:





‘BV3L’ Accessories


‘BV3L’ 400 PSI Diverter

BV3L 4 3**** S

Code Descrip tion

4 Aluminum (standard)

Body Material

Code Descrip tion

3 Brass / Brass

2 Stainless Steel / Brass

Ball / Spindle Mat'l

12Code Descrip tion

1 Buna-N (Standard)

2 EPR

3 Viton

O-Ring Material

Code Descrip tion

2 PTFE Teflon

Ball Seal Material

‘BV3L’ Ordering Codes Summary

‘BV3L’ Performance Curves

'BV3L' Flow Characteristic Curves

3 Port Block Body, ¼" to 1" (input at Port 1)

0

10

20

30

40

50

60

0 10 20 30 40 50 60 70 80 90 100

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

0250 0375 0500 0750

1000

'BV3L' Actuation Torque Guidelines


0

40

80

120

160

100 150 200 250 300 350 400


Actu

ati

on

To

rqu

e(i

n*

lbs)

0375

0750

1000

0250

0500

'BV3L' Flow Characteristic Curves

3 Port Block Body, 1¼" to 2" (input at Port 1)

0

10

20

30

40

50

60

0 50 100 150 200 250 300 350 400 450 500

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

1500

2000

1250

'BV3L' Actuation Torque Guidelines

Large 3-Way Diverter Valves, 1¼" to 2"

0

100

200

300

400

500

100 150 200 250 300 350 400


Actu

ati

on

To

rqu

e(i

n*

lbs)

2000

1500

1250

Code Port Size

0250 ¼"

0375 d"

0500 ½"

0750 ¾"

1000 1"

1250 1¼"

1500 1½"

2000 2"

Size Codes

Code Desc

S SAE ORB

N NPT

Code Desc

B BSPP

T BSPT - special

Code Desc

IU ISO6149

IA ISO1179


METRIC THREADS

ISO THREADS

A

Code Descrip tion

A L-Bore Diverter



Ball Pattern


‘BVxH’ True Multi-Way6,000 PSI trunnion type with stock L/T/X ball patterns;Supports high port-to-port �P ; Sizes from ¼" to 2"Call DMIC for pricing & availability if you require higher pressure or larger multi-way valves.

BVxH

Width

(Thrd)

B

Bore

(L-Bal l )

C

Handle

Length

D

6000 2.46 0.24 7.00

413.8 62.5 6.0 177.8

6000 2.46 0.35 7.00

413.8 62.5 9.0 177.8

6000 2.96 0.49 7.00

413.8 75.2 12.4 177.8

6000 3.96 0.75 10.00

413.8 100.6 19.0 254.0

6000 4.96 0.95 10.00

413.8 126.0 24.0 254.0

6000 5.69 1.24 14.50

413.8 144.5 31.5 368.3

6000 6.48 1.42 14.50

413.8 164.6 36.1 368.3

6000 7.96 1.89 14.50

413.8 202.2 48.0 368.3BVxH-2000**-1111 2"

BVxH-0750**-1111 ¾"

BVxH-1500**-1111

1"BVxH-1000**-1111

1¼"

1½"

BVxH-1250**-1111

BVxH-0375**-1111 d"

BVxH-0500**-1111 ½"

Rated

Pressure

PSI

(bar)

Port

Size

Common Dimensions

BVxH-0250**-1111

(0375 w/reduced ports)¼"

Part Number

DIMENSIONS in (mm)

DMIC 'BV3H' and 'BV4H' series have been upgraded for superiorperformance and durability with DMIC's exclusive top servicabledesign, SpindleStack III™needle bearing construction, andcompatibility with many DMIC Pre-Engineered Accessories andActuation Packages. This model is not restricted to any specific type ofcircuit, and incorporates BLOCKED CENTER (intermediate) positions.

� Three dimensional balanced sealing for near zero leakage in any circuit� Fast availability of Ball Patterns, Stainless Steel, and Special Sealing,

Made by DMIC in the U.S.A. for top quality and reliable delivery dates� DMIC's exclusive SpindleStack III™ Construction incorporates needle

bearings with redundant sealing stages, providing one of the lowestactuation torque and internal leakage designs on the market

� Designed for your most critical and high duty cycle projects

About ‘BVxH’ SeriesDMIC's 'BV3H' and 'BV4H' are our "take no prisoners" designfor circuits with high duty cycle, actuation, or largeport-to-port �P differentials. There are no circuitrestrictions, and these updated designs are significantlyupgraded with needle bearing construction and superiorEngineering safety factor to assure you will receive perhapsthe finest multiway ball valves available.

Best of all, DMIC's U.S. manufacturing means that you willoften benefit from cost savings and accelerated deliveryrelative to competing brands.

Common DimensionsThe following specifications are common to all ‘BVxH’ series valvesregardless of connection style. For valve length ‘A’ and other specificdimensions, please see Dependent Dimensions table adjacent page.

'BV3H'/'BV4H' is manufactured in threaded and flanged styles. For expedientdelivery DMIC keeps shelf stock in threaded styles only. Low volumeflanged orders are factory equipped with 'HSSW' System adapters to achievefast Split & 4-Bolt Flange, Socket Weld, and ANSI/DIN FlangeConnection(s) on one or more ports. OEM volume orders are furnished withdedicated flange ports. We provide OEM version dimensions for common3-like port valves in the Dependent Dimension tables, but this product is highlysuited to customization and we invite you to call for application assistance.

T-Bore Ball (Code C)Standard on 4-way 'BV4H' with 90°action. This is the classic 4-way layoutwith BLOCKED CENTER.Can also be ordered with 180° action(ball code D). Please see the ISOcircuit schematic for application info.

L-Bore Ball (Code A)Standard on 3-Way 'BV3H'. On a 3-wayvalve with 90° action, operates as adiverter valve with BLOCKED CENTER.Can also be ordered in a specialty 4-wayvalve, with 180° action to perform inyour high pressure, high volume specialapplication. Call Factory for specials.

X-Bore Ball (Code F)A frequently ordered 4-way patternwith 90° action can be used fordirectional control with BLOCKEDCENTER. Particularly interestingapplication possibilities underactuation due to convenient 90°action, please see ISO schematic.


‘BVxH’ True Multi-WayDependent DimensionsThese are the valve dimensions (OEM dedicated connection)that vary based on your selection of a connection style. Someconnection styles provide additional dimensions to thosepublished at left; see supplemental sketches next page.

Small quantity ‘BV3H’ and 'BV4H' orders with flange andsocket weld connections may be rapidly built using threadedvalves and ‘HSSW’ adapters, so dimensions may vary.

To harness the full capabilities of DMIC’s ‘SSW’ Power UnitLayout system please call DMIC Helpline at 1-800-248-3642to obtain the Designer’s Guide.




BV3H/4H

A3W A4W E F G -

Port Code(s)Port

Size

3-Way

Length

4-Way

Length

Overal l

Height

Body

Height

Bo ttom

Mt Sq

Mtg Bo l t

Size U N C

¼" 3.07 3.67 4.61 2.48 1.63 1/4-20

d" 3.07 3.67 4.61 2.48 1.63 1/4-20

½" 3.75 4.53 4.83 2.70 1.88 5/16-18

¾" 4.66 5.36 6.18 3.23 2.50 1/2-13

1" 5.92 6.88 6.94 3.98 3.25 1/2-13

1¼" 6.56 7.42 8.14 4.58 3.75 1/2-13

1½" 7.47 8.46 8.64 5.08 4.25 1/2-13

2" 9.26 10.56 10.07 6.21 5.50 1/2-13

A3W A4W E F G -

Port Code(s)Port

Size

3-Way

Length

4-Way

Length

Overal l

Height

Body

Height

Bo ttom

Mt Sq

Mtg Bo l t

Size U N C

½" 4.18 4.61 4.83 2.70 1.88 5/16-18

¾" 5.09 5.53 6.18 3.23 2.50 1/2-13

1" 6.35 6.79 6.94 3.98 3.25 1/2-13

1¼" 6.99 7.42 8.14 4.58 3.75 1/2-13

1½" 7.91 8.34 8.64 5.08 4.25 1/2-13

2" 9.70 10.13 10.07 6.21 5.50 1/2-13

A3W A4W E F G -

Port Code(s)Port

Size

3-Way

Length

4-Way

Length

Overal l

Height

Body

Height

Bo ttom

Mt Sq

Mtg Bo l t

Size UNC

½" 5.04 4.61 4.83 2.70 1.88 5/16-18

¾" 5.96 5.53 6.18 3.23 2.50 1/2-13

1" 7.22 6.79 6.94 3.98 3.25 1/2-13

1¼" 7.86 7.42 8.14 4.58 3.75 1/2-13

1½" 8.77 8.34 8.64 5.08 4.25 1/2-13

2" 10.56 10.13 10.07 6.21 5.50 1/2-13

A3W A4W E F G -

Port Code(s)Port

Size

3-Way

Length

4-Way

Length

Overal l

Height

Body

Height

Bo ttom

Mt Sq

Mtg Bo l t

Size UNC

½" 6.34 5.04 4.83 2.70 1.88 5/16-18

¾" 7.26 5.96 6.18 3.23 2.50 1/2-13

1" 8.52 7.22 6.94 3.98 3.25 1/2-13

1¼" 9.15 7.86 8.14 4.58 3.75 1/2-13

1½" 10.07 8.77 8.64 5.08 4.25 1/2-13

2" 11.86 10.56 10.07 6.21 5.50 1/2-13

A3W A4W E F G -

Port Code(s)Port

Size

3-Way

Length

4-Way

Length

Overal l

Height

Body

Height

Bo ttom

Mt Sq

Mtg Bo l t

Size UNC

½" 5.20 6.65 4.83 2.70 1.88 5/16-18

¾" 6.11 7.57 6.18 3.23 2.50 1/2-13

1" 7.37 8.83 6.94 3.98 3.25 1/2-13

1¼" 8.01 9.46 8.14 4.58 3.75 1/2-13

1½" 8.93 10.38 8.64 5.08 4.25 1/2-13

2" 10.72 12.17 10.07 6.21 5.50 1/2-13

Dimension ( inches)

W4Socket Weld

Connections

FM / GM

FL / FH / FKSAE 4-B

Comp/Std

Flange Conn

SH

CHSAE C.62 Split &

Combo Flg Conn

SAE SPLIT FLANGE C.62 CONNECTION

FIXED SOCKET WELD CONNECTION

Dimension ( inches)

SAE SPLIT FLANGE C.61 CONNECTION

Dimension ( inches)


Dimension ( inches)

N

S

B

IU / IAThreaded

Connections

SM

CMSAE C.61 Split &

Combo Flg Conn

Dimension ( inches)

THREADED CONNECTION

SAE 4-BOLT FLANGE C.61 / C.62 CONNECTION

'BV3H' & 'BV4H' BallPattern Schematics

Actuation and 'BVxH'

You couldn't ask for a better actuation candidate thanDMIC 'BV3H’ and 'BV4H'. DMIC's 3-D balanced designand SpindleStack III™ construction result in some of theindustry's lowest actuation torques at a given pressure.Add the DMIC Ultra Low Friction ball seal option for amultiway ball valve you can actuate and forget about.


‘BVxH’ True Multi-Way


011 1 Valve Body

021* 1 Ball, insert code from table

031 0 (no spindle, trunnnion design)

041 X Ball Seal, Delrin

171 X Connection BU Ring (1¼" & up)

061 X Connection O-Ring



091 1 Stop Pin (SHCS)

101* 1 Stop Washer (specify code)


121** X Connection End, add code

131 2 SpindleStack III™ Needle Brg

141 4 Top Cap SHCS


181 1 Valve Body Top Cap

BV3H/4H

BV3H/4H Physical ConstructionParameter Mater ial

BODY Steel Body, Endcaps & Topcap

BALL Trunnion Type, Steel, Chrome Plated

SPINDLE SEALS DMIC SpindleStack III™

STD HANDLE Steel, High Torque T-Type



TEMP RANGE -22°F to 212°F (-30°/100°C)

LIFE


'HSSW' Possibilities'BVxH' can be configured with Hose Barb,4-Bolt/Split /ANSI Flange, and Swivel SocketWeld connections. You can route mechanicallyrigid 'HSSW' adapters in Inline, 45°, and 90°degree directions with dimensional tolerancespreviously only dreamed of. Also, you caninterchangeably assemble Imperial and Metricstandard power units to the same layoutdimensions. High pressure 'HSSW' adaptersare available in frequently ordered styles, rated for 3,000 PSI .

C.61 4-BOLT FLANGEOrder 'HFMC' adapter to receive Code61 SAE 4-Bolt Companionconnections. Order 'HFMM' forStandard Flange (through bolt holes).

C.61 SPLIT FLANGEOrder 'HSFM' adapter to convert toconnection code SM (C.61 Split FlangeHead). Rated to 3000 PSI. Rapid ordera Split Flange kit with suffix /SFK.

FIXED SOCKET WELDOrder adapter 'HFSW' (convertsthreaded port to equivalent ofconnection code W4) to receive"fixed" socket weld connections forpipe. HSSW rated to 3000 PSI.

DMIC ‘BV3H’ and ‘BV4H’ can be equipped with theindustry’s widest array of labor and cost-saving BallValve accessories, including:

� Locking Handles, OSHA type and Security� Limit Switch Brackets, with one of two switches,



High Torque “T-type”Handle is StandardDMIC ‘BV3H’ and ‘BV4H’ now come standard with ourstrongest handle for safety and peace of mind in yourmost demanding applications.

‘BVxH’ Accessories

‘BVxH’ Service Parts BOM


‘BVxH’ True Multi-Way

‘BVxH’ Ordering Codes Summary

‘BVxH’ Performance Curves

'BVxH' Flow Characteristic Curves

Small Valve Sizes, ½" to 1"

0

10

20

30

40

50

60

0 20 40 60 80 100 120 140

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

0500 0750 100003750250

'BVxH' Actuation Torque Guidelines

Small Valve Sizes, ¼" to 1", 2 Ports Pressurized

0

500

1000

1500

0 1000 2000 3000 4000 5000 6000


Actu

ati

on

To

rqu

e(i

n*

lbs)

0375

0750

1000

0250

0500

'BVxH' Flow Characteristic Curves

Large Valve Sizes, 1¼" to 2"

0

10

20

30

40

0 100 200 300 400 500 600

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

1250

2000

'BVXH' Actuation Torque Guidelines

Large Valve Sizes, 1¼" to 2", 2 Ports Pressurized

0

1000

2000

3000

0 1000 2000 3000 4000 5000 6000


Actu

ati

on

To

rqu

e(i

n*

lbs)

2000

1500

1250

Code Descrip tion

1 Carbon Steel

2 Stainless Steel

Body Material

BVxH 1 1**** S 11Code Port Size

0250 ¼"

0375 d"

0500 ½"

0750 ¾"

1000 1"

1250 1¼"

1500 1½"

2000 2"

Size Codes

A

Code Descrip tion

A L-Bore Diverter



F X-Bore, 90° Action

Ball Pattern

Code Descrip tion

1 Carbon Steel

2 Stainless Steel


Code Descrip tion

1 Delrin

2 PTFE Teflon

3 Peek

4 High Temperature


Ball Seal Material

Code Descrip tion

1 Buna-N (Standard)

2 EPR

3 Viton

4 DMIC Hi-Temp

O-Ring Material

Code Desc

S SAE ORB

N NPT

MJ JIC-M

B BSPT - special

T BSPT - special

D* DIN Tube - call

IU ISO6149

IA ISO1179


METRIC THREADS

ISO THREADS


‘BVMM’ Manifold Mount2- and 3-Way models ; Improved design for 2001 ;3000/6000 PSI Working Pressure; Sizes from ¼" to 2"Aluminum & steel models dimensionally interchangeable; Near-zero leakage ‘BVMMZ’ 3-way

DMIC’s re-engineered ‘BVMM’ brings into the cost-competitivemainstream the possibility of surface mounting a High Pressure 2- or3-Way ball valve to your custom manifold, eliminating an external fluidconnection and improving the integrity of your design. Choice ofaluminum construction balances valve pressure characteristics withyour selected manifold material. Exclusive and original DMIC design.

� Offered with “L-Bore” standard, “T” bore optional in 90° and 180° action� Made in our U.S. factory for fast delivery in Steel (6000 PSI) and

new lightweight Aluminum model for 3000 PSI service� Refined Spindle-Glide™ design and Delrin ball seals extend service� Upgraded Twin Plug Design reduces pressure drop and valve cost� New for 2001 ! The ‘BVMMZ’ 3-way model offers near-zero leakage

About ‘BVMM’ SeriesDMIC's ‘BVMM’ mounts directly to your steel oraluminum manifold. increasing circuit integration andreliability. DMIC's now industry standard Manifold Padis on file with the world's premier manifold makers, sowhen ordering your manifold you need simply specifythat DMIC Ball Valve porting(s) are to be included,eliminating delays, costs, headaches and incompatibilties.

BVMM 3-WayInclude a ball pattern codeto denote a 3-way valve.Usual inlet is port #1 (seebelow). Available in L and Tbore. Shown in steel.

BVMM 2-WayThis model does not use aball pattern code. Operatesas an on-off ball valve,accepts DMIC accessories.Shown in aluminum.

Manifold Pad Dims

Dimensional Sketches‘BVMM’ series valves are unique in our product line and share no externaldimensions with the other series, so we offer all dimensions in a grouped tableon the next page.

Please call DMIC to verify the current status of these dimensions in thiscatalog before manufacturing a prototype manifold.

‘BVMM’ MOUNTINGPADS ARE NOT

SYMMETRICAL !

Prevent expensivelayout mistakes !Note the “PIN”location on the paddiagram. This is thestop pin on thevalve top. DMICships valves withthe handle pointingopposite the pin.


‘BVMM’ Manifold MountBall Valve DimensionsMost 'BVMM' valve dimensions vary based on valve size. We have included dimensions for the Ball Valve as well as the Mounting Pad in the twotables below. When designing by spec and/or preparing to build manifold prototypes, please request a certified print.

BVMM

Valve

Length

A

B o dy

H eight

B

Internal

B o re

C

Overall

Length

D

H andle

Length

E

Valve

Width

F

Overall

H eight

G

B o lt

D ist A

H

B o lt

D ist B

J

6000 3.00 1.50 0.24 3.75 4.50 2.00 3.11 1.653

413.8 76.2 38.1 6.1 95.3 114.3 50.8 78.9 42.0

3000 3.00 1.50 0.24 3.75 4.50 2.00 3.11 1.653

206.9 76.2 38.1 6.1 95.3 114.3 50.8 78.9 42.0

6000 3.22 1.61 0.38 3.97 4.50 2.19 3.22 2.165

413.8 81.8 40.9 9.5 100.8 114.3 55.6 81.7 55.0

3000 3.22 1.61 0.38 3.97 4.50 2.19 3.22 2.165

206.9 81.8 40.9 9.5 100.8 114.3 55.6 81.7 55.0

6000 4.38 1.96 0.51 5.38 4.50 2.38 3.57 3.267 1.634

413.8 111.3 49.8 13.0 136.7 114.3 60.3 90.6 83.0 41.5

3000 4.38 1.96 0.51 5.38 4.50 2.38 3.57 3.267 1.634

206.9 111.3 49.8 13.0 136.7 114.3 60.3 90.6 83.0 41.5

6000 5.67 2.75 0.79 6.57 7.00 2.75 5.20 3.818 1.909

413.8 143.9 69.9 20.1 166.8 177.8 69.9 132.0 97.0 48.5

3000 5.67 2.75 0.79 6.57 7.00 2.75 5.20 3.818 1.909

206.9 143.9 69.9 20.1 166.8 177.8 69.9 132.0 97.0 48.5

6000 6.25 3.25 0.94 7.25 7.00 3.25 5.70 4.528 2.264

413.8 158.8 82.6 23.9 184.2 177.8 82.6 144.7 115.0 57.5

3000 6.25 3.25 0.94 7.25 7.00 3.25 5.70 4.528 2.264

206.9 158.8 82.6 23.9 184.2 177.8 82.6 144.7 115.0 57.5

6000 7.10 3.94 1.25 8.35 10.00 4.00 7.05 5.354 2.677

413.8 180.3 100.0 31.8 212.1 254.0 101.6 179.2 136.0 68.0

3000 7.10 3.94 1.25 8.35 10.00 4.00 7.05 5.354 2.677

206.9 180.3 100.0 31.8 212.1 254.0 101.6 179.2 136.0 68.0

6000 7.72 3.95 1.50 8.97 10.00 5.00 7.07 4.409 2.205

413.8 196.1 100.4 38.1 227.8 254.0 127.0 179.6 112.0 56.0

3000 7.72 3.95 1.50 8.97 10.00 5.00 7.07 4.409 2.205

206.9 196.1 100.4 38.1 227.8 254.0 127.0 179.6 112.0 56.0

6000 9.72 4.42 1.89 10.97 10.00 6.00 7.54 5.354 2.677

413.8 247.0 112.2 47.9 278.7 254.0 152.4 191.4 136.0 68.0

3000 9.72 4.42 1.89 10.97 10.00 6.00 7.54 5.354 2.677

206.9 247.0 112.2 47.9 278.7 254.0 152.4 191.4 136.0 68.0

These

models

have

only 4

bolt

holes.

Rated

Pressure

PSI (bar)

Port

Size

BVMM-0250**-4111

BVMM-0250**-1111

Part Number

¼"

BVMM-0750**-1111

BVMM-0375**-1111

BVMM-0375**-4111

d"

½"

¾"

BVMM-0500**-1111

BVMM-1500**-1111

BVMM-1500**-4111

BVMM-1000**-1111

BVMM-1000**-4111

1"

BVMM-0500**-4111

1½"

2"

BVMM-1250**-1111

BVMM-1250**-4111

1¼"

BVMM-2000**-4111

BVMM-0750**-4111

BVMM-2000**-1111

'BVMM' Ball Valve DimensionsVALVE DIMENSIONS in (mm)

BVMM

H o le

Spacing

K

R H Side

to B / H o le

M

P o rt

1 to 3 C tr

N

R H B o tt

to B / H o le

P

O-R ing

D iam/ Size

Q

R H Side

to P o rt 3

R

P o rt 2 to 1

C enter

S

P o rt 2 to 3

C enter

T

B o lt H o le

& M ax B o lt

U

1.377 0.547 1.535 0.312 0.500 0.635 0.670 1.535 0.350

35.0 7.3 39.0 7.9 2-109 16.1 17.0 39.05/16" , M8

1.575 0.285 1.732 0.308 0.625 0.628 0.750 1.732 0.350

40.0 7.2 44.0 7.8 2-111 16.0 19.1 44.05/16" , M8

1.771 0.293 2.283 0.302 0.750 0.947 1.040 2.283 0.350

45.0 7.4 58.0 7.7 2-113 24.1 26.4 58.05/16" , M8

2.007 0.892 2.716 0.372 1.063 1.594 1.210 2.716 0.410

51.0 10.0 69.0 9.4 2-211 40.5 30.7 69.0 d" , M10

2.362 0.849 3.188 0.444 1.313 1.638 1.496 3.188 0.510

60.0 11.5 81.0 11.3 2-215 41.6 38.0 81.0 ½" , M12

3.070 0.676 3.780 0.465 1.563 1.580 1.810 3.780 0.516

78.0 17.2 96.0 11.8 2-219 40.1 46.0 96.0 ½" , M12

3.740 1.661 4.409 0.630 1.875 1.661 2.210 4.409 0.656

95.0 42.2 112.0 16.0 2-223 42.2 56.1 112.0 e" , M16

4.409 2.178 5.354 0.796 2.250 2.178 2.670 5.354 0.830

112.0 55.3 136.0 20.2 2-226 55.3 67.8 136.0 ¾" , M20

MOUNTING PAD DIMENSIONS in (mm)

Fits BVMM-0250** ¼"

Part NumberPort

Size

¾"

Fits BVMM-1000** 1"

Fits BVMM-0375** d"

Fits BVMM-0500** ½"

2"Fits BVMM-2000**

Manifold Mounting Pad Dimensions for Steel & Aluminum 'BVMM'

Fits BVMM-1250** 1¼"

Fits BVMM-1500** 1½"

Fits BVMM-0750**


‘BVMM’ Manifold Mount

‘BVMM’ Service Parts BOM

Optional Near ZeroLeakage Version

New for 2001 ! DMIC’s design leadership now allows us tofurnish the 3-way ‘BVMM’ with near-zero leakage - anindustry exclusive. Call 1-800-248-3642 for more info.


011* 1 Valve Body

021* 1 Ball, see table for multiway code


041 2 Ball Seal, Delrin

051 2 Internal O-Ring




091 1 Stop Pin

101 1 Stop Washer


121 2 Plug End



162 1 Handle Bolt

BVMM

BVMM-1 Steel Valve Construction BVMM-4 Aluminum Valve Constr.Parameter Mater ial Parameter Mater ial

BODY Steel Body & Plugs, for 6000 PSI BODY Aluminum Body & Plugs, for 3000 PSI

BALL Steel, Chrome Plated BALL Steel, Chrome Plated

SPINDLE Steel, Zinc Plated SPINDLE Steel, Zinc Plated

STD HANDLE Forged Steel, Nickel Plated STD HANDLE Forged Steel, Nickel Plated

BALL SEALS Delrin, optional Teflon and PEEK BALL SEALS Delrin, optional Teflon and PEEK

O-RINGS O-Ring + BU, Buna-N std. O-RINGS O-Ring + BU, Buna-N std.

TEMP RANGE -22°F to 212°F (-30°/100°C) TEMP RANGE -22°F to 212°F (-30°/100°C)

LIFE


LIFE




‘BVMM’ 3-Way ModelBall Ordering CodesThree way ‘BVMM’ valves use an additional orderingcharacter to specify the ball pattern.

For example, a standard 3-way 1-inch ‘BVMM’ with“L-bore” ball would be model BVMM-1000A-1111.

The corresponding 2-way valve would be modelBVMM-1000-1111. Please confirm availability of balltypes B/C/D prior to placing express-freight orders.


‘BVMM’ Manifold Mount

‘BVMM’ Ordering Codes Summary

‘BVMM’ Performance Curves

'BVMM' Flow Characteristic Curves

Small Valve Sizes, ½" to 1"

0

10

20

30

40

50

60

0 10 20 30 40 50 60 70 80

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

0500 0750 100003750250

'BVMM' Actuation Torque Guidelines


0

250

500

750

1000

0 1000 2000 3000 4000 5000 6000


Actu

ati

on

To

rqu

e(i

n*

lbs)

0375

0750

1000

0250

0500

'BVMM' Flow Characteristic Curves


0

10

20

30

40

0 50 100 150 200 250 300 350 400

Flow (US GPM)

Pre

ssu

reD

rop

(PS

I)

1500

2000

1250

'BVMM' Actuation Torque Guidelines


0

500

1000

1500

2000

0 1000 2000 3000 4000 5000 6000


Actu

ati

on

To

rqu

e(i

n*

lbs)

2000

1500

1250

Code Port Size

0250 ¼"

0375 d"

0500 ½"

0750 ¾"

1000 1"

1250 1¼"

1500 1½"

2000 2"

Size Codes

Code Descrip tion

blank 2-Way Valve

A L-Bore Diverter



Ball Pattern

BVMM 4 1**** 11A

Code Descrip tion

1 Carbon Steel

2 Stainless Steel

4 Aluminum

Body Material

Code Descrip tion

1 Carbon Steel

2 Stainless Steel


Code Descrip tion

1 Buna-N (Standard)

2 EPR

3 Viton

4 DMIC Hi-Temp

O-Ring Material

Code Descrip tion

1 Delrin

2 PTFE Teflon

3 Peek

4 High Temperature


Ball Seal Material


Technical AppendixDesigner’s guide to technical characteristics

and design parameters of DMIC Ball ValvesDMIC’s Ball Valves are preferred bysophisticated customers who rely on properfactory support, because if there’s ever anEngineering problem, we don’t dial 01149 ... wecall an Engineering meeting in our boardroom -and SOLVE IT !This technical appendix is provided for theaudience of Engineers and Designers who haveselected DMIC Ball Valves for their application andwish to verify operational or Engineeringparameters of our valves as they relate to theproject.

While we strive for total accuracy in all ourpublications, if you spot an error, please call DMICHelpLine toll free at 1-800-248-DMIC and we willamend the next catalog reprint.

This discussion of DMIC’s Floating Balanced Ball Valve Design operation is primarilyapplicable to DMIC’s High Pressure Ball Valves, although many aspects of operation areshared among the “trunnion ball” multiway designs and the lower pressure brass valves.

FULLY OPEN POSITION (Figure 1)When a DMIC ball valve is fully open, the internal parts are aligned within the steel valve body asillustrated in Figure 1. The handle is parallel to the axis of fluid flow (factory default), and the ballopenings are concentric with the inner holes of the ball seals. A cam path cut into the stopwasherpermits handle travel only through 90° of arc, which is why a 2-way ball valve is considered a “quarter-turn” valve. DMICprovides a Pressure Balancing Orifice in its balls which allows the medium to permeate the cavity within the valve at linepressure to moisten and prevent deterioration of valves left stationary for long periods of time.

Figure 1Fully Open

FULLY CLOSED POSITION (Figure 3)In the fully closed position, the solid ball surface completely blocks the valve fluidpassage and upstream line pressure exerts force upon the floating ball, pressing it into the downstream hardthermoplastic ball seal. With the ball’s slight axial displacement toward the downstream seal, the upstream ball sealbreaks contact with the ball and rides the meniscus. DMIC’s innovative Pressure Balancing Orifice in each of ourballs allows fluid at upstream pressure to permeate the entire cavity of the closed valve, getting all the way aroundto the only ball seal that is actually sealing, and even behind it. A precision ridge machined opposite the ball seat ofDMIC’s Ball Seals acts as an additional surface upon which full line pressure is exerted, improving both low and highpressure sealing in DMIC Ball Valves relative to ordinary brands. For lower pressures (<1500 PSI) and vacuum,DMIC’s softer PTFE Teflon Ball Seals are recommended.

Figure 3Fully

Closed

Figure 2Partial

Closure

PARTIALLY CLOSED POSITION (Figure 2)When the handle is turned from the 0° position, the tab at the bottom of the spindle causes the ball to rotateproportionally and alters the ball valve assembly’s effective cross-sectional area, thereby “closing” the valve. As theangle increases between the ball fluid passage and the axis of flow, the ball, which was previously constrained to pivotradially by the spindle tab (perpendicular to the axis of flow), is now permitted to pivot axially along the hypotenuse of aright triangle drawn between the axis of flow and the ball fluid passage (with force generated upon the ball sealsproportional to the sine of the angle formed). At 90°, the sine equals one, the valve is fully closed, and all force exerted

by fluid pressure acts to move the ball against the ball seals - hence, the ball is nowfully “FLOATING” because it is free to pivot against and exert a force upon eitherdownstream ball seal in response to forces arising from pressure at the upstreamclosed port.

Floating Balanced BallDesign, Principle of Operation


DMIC Ball Valves promote smoothlaminar flow with STRAIGHT BALLPASSAGE & UNRESTRICTED BOREdesign.

DMIC’s 2-Way Ball Valves such as the‘BVH’ and ‘BVAL/M/H’ series, imposeso little pressure drop on their ownthat we include the curves with a 10foot section of fluid line in themeasurement loop.

This chart will give you an real-worldindication of Ball Valve �P in ahypothetical 10 foot line.

DMIC’s Multiway and ManifoldMounted Ball Valves introduce apressure drop component becauseinstead of a straight fluid path, media

must change direction as it travels through the valve. We have included valve pressure drop curves for each principal type of DMICspecialty ball valve. All flows quoted in this section taken with petroleum based fluid, 150 SUS, at 100°F (38°C).

Pressure Drop of DMIC Specialty Ball ValvesDMIC’s specialty Ball Valves are precision designed to maximize available cross sectional area and minimize the protrusion ofparts throughout internal fluid passages.

However, the nature of DMIC’s trunnion ball multiway valves and manifold mounted valves, results in a pressure drop componentthat should be taken into account when designing circuits bearing these valve types. DMIC’s quality oriented engineering biasresults in valves which cost more to manufacture but provide among the best performance available among like valves in the field.

Please verify your application’s operating conditions to confirm that the pressure drop is accounted for in your system design.

Determining Pressure Dropat a Specific Flow Rate

DMIC’s unrestricted bore ballvalves provide a fluid path whichin most cases imposes nodiscernible pressure drop instandard hydraulic circuits. As aresult, you can treat our valves asjust a like length of fluid line, unlessyou are working with closed loop orother fancy circuits where a tinypressure drop carries a price tag inheat generation, etc.

The selection chart at right may beused as a guide for confirming yourchoice of ball valve/fluid line sizerelative to the expected flow in U.S.GPM at a given velocity.

Flow Characteristic Curvesfor DMIC 2-Way Ball Valves


Sealing Materials Technical Data

Never operate DMIC Ball Valves outside the temperature range published below for your selectedThermoplastic & Elastomer materials, even if the combination is approved in the Media Acceptability

Table (next page). You may experience valve leakage or failure, and will void the warranty.

OrderCode

DMICDescription

TemperatureRange Seal Compound

IdentificationAcronym

ClassificationSynthesis Trade Names

ChemicalResistance Examples

°F °C Suitable Not Suitable

Ball Seal Materials (Digit 3)

1 Delrin-22°F

to212°F

-30°Cto 100°C

DelrinPolyoxymethylene

DM

ThermoplastSaturated heteropolymer ofheterogeneous polymerchains

Delrin

Hydraulic FluidsWaterInert GasesAirAlcoholsGlycolsPetroleum basedfluids

High molar acids& alkalis

Fluorines

Liquids for humanconsumption

2 PTFETeflon™

-76°Fto

356°F

-60°Cto

180°CPolytetrafluoroethylene PTFE

ThermoplastHomogeneous, purepolymer chains, containingfluorine.

TeflonHostaflon

Fluon

FoodstuffsAcids & alkalisOrganic &Inorganic Solvents

Fluorines

Liquid alkali metals

4 PEEKHi-Temp

-40°Fto

482°F

-40°Cto

250°CPolyether-ether-ketone PEEK

ThermoplastAromaticLinear Polymer Victrex

Most fluidsacceptable withDelrin Moly

Radioactive use

High molar acids& alkalis

6ULTRA

LOW FRICTIONLo-Temp

-310°Fto

482°F

-190°Cto

250°CProprietary PAI

Hydraulic fluidsMany acidsAlcohols & organicsolvents

Hot WaterSteamStrong Alkalis

9FERROUSSpecial

ApplicationsCall DMIC Cast Iron PI

Call DMIC

O-Ring & Backup Seal Materials (Digit 4)

1 Buna-N-65°F

to250°F

-53°Cto

121°C

Nitrile Butadienerubber

NBR

ElastomerUnsaturated heteropolymercompounded fromacrylonitrate and butadiene.

NitrilePerbunan

ChemigumElaprimKrynac

Petroleum basedfluidsWaterAir

Phosphate esters

2 EPR-65°F

to300°F

-53°Cto

148°C

Ethylene-propylene-diene rubber

EPREPDM

ElastomerSaturated heteropolymerutilizing double valencebands outside the primarychain

Buna APDutralEpcar

KeltranNordel

Phosphate esters

Brake Fluid

Acids & Alkalis

Petroleum basedoil & grease

Chlorinatedhydrocarbons

3 Viton-20°F

to350°F

-28°Cto

176°C

Fluoropropylenemethylene

FPM

ElastomerMultiple monomers &fluorine compounded intosaturated heteropolymer

VitonFluorel

Technoflon

NBR compatiblefluids

Acids & alkalis

Phosphate esters

4 Teflon-320°F

to500°F

-195°Cto

260°CPolytetrafluoroethylene PTFE

ThermoplastHomogeneous, purepolymer chains, containingfluorine.

TeflonHostaflon

Fluon

FoodstuffsOrganic &Inorganic Solvents

Fluorines

Liquid alkali metals

5 Urethane-20°F

to250°F

-28°Cto

121°CPolyurethane PUR

Thermoplastic ElastomerCrosslinked additionpolymer

AclathanDurethan UUltrathan

GasolineGlycolsCold Water

OxidantsHot mediaDOT 3/4 BrakeFluid

6 Silicone-135°F

to400°F

-92°Cto

204°CSilicone Rubber SI

ElastomerMade from silicone, oxygen,hydrogen, carbon.

High aniline pointoilsChlorinatedbiphenylsSome waterglycols

7 Neoprene-65°F

to250°F

-53°Cto

121°CChloroprene Rubber CR

ElastomerHomopolymers ofchlorobutadiene

FreonsHigh aniline pointpetroleumSilicate Ester

Phosphate ester

8 Buna-S-65°F

to250°F

-65°Cto

250°C

Styrene and butadienerubber

SBR

ElastomerStyrene and butadienerubber. Substitute fornatural rubber.

Brake fluidAlcoholsWaterKetones

OzonePetroleum

9 Corfam-65°F

to212°F

-53°Cto

100°C

Corfam porometricsubstrate impregnated

with adiprenepolyurethane rubber

COR

Totally new material withhigh abrasion, oil and fuelresistance. Waterproof.Available with silicone orteflon coating.

General purposePetroleaumWater GlycolsWater/oil emulsionWater soluble oil

High test gasolineHot detergentwaterPhosphate

This information provided as is, for reference purposes only. DMIC makes no guarantee as tothe accuracy of this information. In the event of misapplication, the entire responsibility restswith the user. Verify your selection with your system’s seal manufacturer for a final authority.


Seal Compound to Media Compatibility Table

This media compatibility table is provided for your reference as an INDICATION ofacceptable usage. Please bear in mind that DMIC relies upon suppliers of seal rawmaterials and premium brand O-Rings for much of this information and it is advised thatyou consult your system’s seal supplier if there is any question or doubt. The sealmanufacturer’s data shall be considered a final authority in case of discrepancy.

DMIC supplies this data as is, for reference purposes only, and the user is responsiblein case of valve misapplication.

Legend:

R - RecommendedM - MarginalU - Probably not acceptableX - Not recommended

FLU

ID

NIT

RIL

E

SB

R

EPD

M

NEO

PR

ENE

PO

LYA

CR

YLA

UR

ETH

AN

E

SIL

ICO

NE

FLU

OR

OEL

AS

FLU

OR

OS

ILI

AFL

AS

Acetaldehyde U U R U U U R U U X

Acetamide R U R R U U M U R R

Acetic Acid M M R R U U R U U U

Acetone U M R M U U M U U U

Acetophenone U U R U U U U U U X

Acetylene R R R R X X R R X X

Ammonia R R R R U X R U U R

Ammonium Hydrozid R R R R U U R R R R

Amyl Acetate U U M U U U U U U U

Anderol L-774 M U U U R U U R M X

Antifreeze R R R R U U R R X X

Aniline U U R U U U U M M R

Ansul Ether M U M U U R U U M U

Aroclors M U R U U X M R M R

Askarel R U U U U U U R M R

ASTM #1 R U U R R R R R R R

ASTM #3 R U U U R R U R R R

ASTM Fuel A R U U R R R U R R M

ASTM Fuel B R U U U U R U R R U

ASTM Fuel C R U U U U R U R M U

ASTM Fuel D M U U U U R U R X X

Auto Transmission R U U M R R M R X R

Benzaldehyde R R R R U U R R R R

Benzene U U R U U U U U U M

Benzine R U U R R R U R R M

Benzoic Acid U U U U U U U R M R

Benzophenenone U U R X U U U R R X

Bezyl Alcohol U U R R U U X R M R

Bleach R R R R U U U R M R

Borax R R U R R R R R M R

Boric Acid R R R U R R R R R R

Brake Fluid (non

Bromine U R R U U U R U U R

Bromobenzene U U U U U U U R M M

Bunker R U U U R R U R R R

Butane R M R R R U U R R M

Butler R U R R R R R R R R

Butyl Acetate U U U U U U U U U U

Butyl Alcohol R R R U U U R R R R

Butyl Amine M U U U U U R U U M

Butyl Carbitol U U M U U X U M U M

Butyl Cellosolve M U M U U U X U U X

FLU

ID

NIT

RIL

E

SB

R

EPD

M

NEO

PR

ENE

PO

LYA

CR

YLA

UR

ETH

AN

E

SIL

ICO

NE

FLU

OR

OEL

AS

FLU

OR

OS

ILI

AFL

AS

Butylraldhyde U U U U U U U U U X

Carbitol R R R U U U R R M R

Carbitol Acetate U U U U U U U R X R

Carbon Disulfide U U U U U X U R R R

Carbon Tetrachlor R U U U U U U R M M

Carbonic Acid R R R R R R R R R R

Castor Oil R R R R R R R R R R

Cellosolve U R U U U U U U U M

Chassis Grease R U M R R X U R X X

Chloracetic Acid U U U U U U X U U X

Chloracetone U U M X X X U R X U

Chlordane R U M X X X U R M X

Chlorine U U U U U U X R R X

Chlorobenzol U U U U U U U R X X

Chloroform U U U U U U U R M U

Chorosulfonic Aci U U U U U U U U U M

Chrome Plating So U U U U U U R R U R

Chromic Acid U U U X X X M R U R

Citric Acid R R R X X X R R R R

Cod Liver Oil R U R R R U R R R R

Coffee R R R U U U R R R X

Corn Oil R U U R R U R R R R

Creosote R U R R R M U R R R

Creosote Oil R U M X X X M R X X

Creosylic Acid U U U U U U U R M R

Crude Oil R U U R R X U R M X

Cycloherxane R U M R R R U R R M

Cyclohexanol R U R X X X U R R R

Decalin U U U U U U U R R M

Denatured Alcohol R R R U U U R R R R

Diacetone U U U U U U U U U M

Dibutyl Amine U U M U U U U U U R

Dibutyl Phthalate U U U U U X X M U M

Dichloro Aniline U U U U U U U M X X

Dichloro Butane R U U U U U U R M R

Diesel Oil R U M U U U U R R R

Diethylamine R R R U U M R U U M

Diethyl Benzene M U U U X X X R X X

Diethylene Glycol R R R R U U R R R R

Dimrthyl Ether U U U M M R U U U U

Dimethyl Formamid U X R X X X R U X M

Dimethyl U U R U U X X R X M


Media Compatibility Table, cont.

FLU

ID

NIT

RIL

E

SB

R

EPD

M

NEO

PR

ENE

PO

LYA

CR

YLA

UR

ETH

AN

E

SIL

ICO

NE

FLU

OR

OEL

AS

FLU

OR

OS

ILI

AFL

AS

Dimethyl Terephth U U U U U U U R X X

Dioctyl Phthalate U U R U U U M R M M

Dioxane U U R U U U U U U U

Diphenyl U U U U U U U R M U

Dow Corning 550 U R R R R R R R R X

Dow Gard R R R R M M R R R X

Dowtherm A&E U U U U U U U R M X

Elco 28 R U U M R R R R R X

Epoxy Resins X X R R X X X U X X

Ethane R U U R R M U R M R

Ethanol R R R R U R R R R X

Ethanolamine R R R R U M R U U R

Ethyl Acetata U U R U U U R U U U

Ethyl Benzene U U U U U U U R R U

Ethyl Cellulose R R R R U R R U U R

Ethyl Cloride R R R R M R U R R M

Ethyl Ether M U M U U R U U M U

Ethyl Formate U U R R X X X R R R

Ethyl Hexanol M R R R X X X R R X

Ethyl Merlaptan U U X M X X M R X M

Ethylene Cloride U U U U U U U R X R

Ethylene Oxide U U R U U U U U X U

Formaldehyde M M R M U U R U U M

Formic Acid M R R R X X M U X X

Freon 12 R R R R X R U R U X

Fuel Oil R U U R R U U R R R

Furan U U X U U X X X X X

Furfural U U R U U X U U X X

Furfuyl Alcohol U U R U U U U X U X

Fyrquel U U R U U U R R U X

Gallic Acid R R R R U U X R R R

Gasoline R U U U U R U R R M

Gelatin R R R R U U R R R R

Glucose R R R R X U R R R R

Glycerine R R R R U U R R R R

Heplane R U U R R R U R R X

Hexaldehydee U U R R X X R U U U

Hexane R U U R R R U R R M

Hexanol R R M R U U R R X X

Home Heating Oil R U U M R R R R X X

Hydazine R R R R X X R X X X

Hydrochloric Acid R M R R M U U R U R

Hydrocyanic Acid R R R R U X M R U R

Hydrogen Peroxide R R R R U X R R R R

Hyydrogen Sulfide U U R R U X M U U R

Hydroquinone M U U U U X X R M X

Hypoid Gear Lube R U U M R R M R X X

Iodine R R R U X X X R R X

Isocyanate X X X X X X X R X X

FLU

ID

NIT

RIL

E

SB

R

EPD

M

NEO

PR

ENE

PO

LYA

CR

YLA

UR

ETH

AN

E

SIL

ICO

NE

FLU

OR

OEL

AS

FLU

OR

OS

ILI

AFL

AS

Iso Octane R U U R R R U R R M

Iso Phorone U U R U U U U U M U

Isopar R X U R R R U R X X

Isopropanol R R R R U U R R R X

Isopropyl Acetate U U R U U U U U U X

JP-4(MIL-J5624) R U U U R R U R M X

JP-5(MIL-5624) R U U U R R U R M X

Kerosine R U U R R R U R R R

Latic Acid R R R R U X X R R R

Lacquers U U U U U U U U U U

Lard R U R R R R R R R R

Linoleic Acid R U U R X X R R X R

Linseed Oil R U M M R X R R R R

Lye Solutions R R R R U U R R M R

Malathion R U U X X X U R M X

Maleic Acid U U U U U X X R X R

Mercury R R R R X X X R X R

Meter-Cresol U U U R U U U R X X

Methane R U U R R M U R M R

Methanol R R R R U U R U R X

Methyl Acetate U U R R U U U U U U

Methacrylic Acid U U R R U U U M U X

Methyl Cellosolve M U R M U U U U U X

Methylene Chlorid U U U U U U U R M X

Methyl Ethyl Keto U U R U U U U U U U

Methyl Mercaptan X X R X X X X X X X

Milk R R R R U U R R R R

Mineral Oil R U M R R R R R R R

Mineral Spirits R U U U R R U R X X

Monovinyl Acetyle R R R R X X R R X R

Mustard X E R X X X R R X X

Naphtha R U U U R R U R M M

Naphthalene U U U U X X U R R M

Naphthenic Acid R U U U X X U R R M

Natural Gas R R U R R R R R M R

Neatsfoot Oil R U R U R R R R R R

Nitric Acid U M R U U U U M U R

Nitrobenzene U U U U U U U R U X

Nitropropane U U R U U U U U U X

Octane R U U U U U U R M M

Octanol R R R R U U R R X X

Oleic Acid M U U M X X U R X R

Oleum R U U M X X U R X R

Oronite 8200 R U U R X R U R R X

Oxalic Acid R R R R X X R R R R

Peanut Oil R U M M R X R R R R

Pentane R M U R R U U R M X

Perchlorethylene R U U U U U U R M X

Petroleum Ether U U U U U U U R X X


Media Compatibility Table, cont.

FLU

ID

NIT

RIL

E

SB

R

EPD

M

NEO

PR

ENE

PO

LYA

CR

YLA

UR

ETH

AN

E

SIL

ICO

NE

FLU

OR

OEL

AS

FLU

OR

OS

ILI

AFL

AS

Phenol U U U U U U U R M X

Phenylhydrazine U M U U U X X R X R

Phosphoric Acid R R R R M U R R M R

Pine Oil R U U U X X U R R R

Potassium Hydroxi R R R R U U M U M R

Propane R U U R R M U R M R

Propanol R R R R U U R R X X

Propyl Acetate U U R R U U U U U U

Pydraul U U R R U U U R U R

Pyranol R U U R R R U R X R

Pyridine U R U U U X U U X R

Rapeseed Oil R U R R R R U R R R

Resurcinol X R R X X X X X X X

SAE 10W30 R U U M R R R R X X

Seawater R R R R U U R X R R

Silicone Grease R R R R R R R R R R

Silver Nitrate R R R R R R R R R R

Skelly Solvent R U U U X X X R R X

Skydrol U U R U U U U R X R

Skydrol 500 U U R U U U U U M R

Sodium Hydroxide R R R R U R R R M R

Sovasol R U U R R R U R R X

Soy Bean Oil R U M M R X R R R R

Stearic Acid R R R R X X R X X R

Stoddard Solvent R U U R R R U R R M

FLU

ID

NIT

RIL

E

SB

R

EPD

M

NEO

PR

ENE

PO

LYA

CR

YLA

UR

ETH

AN

E

SIL

ICO

NE

FLU

OR

OEL

AS

FLU

OR

OS

ILI

AFL

AS

Sucrose R R R R U U R R R R

Sulfuric Acid R R R R R U U R U R

Tail Oil R U U M R U X R X X

Tannic Acid R R R R U X R R X R

Tar R U U M U X R R R R

Tartaric Acid R R R R X X R R R R

Tetrachloro Ethan U U U U U U U R M X

Tetralin U U U U U U U R R R

Tidewater Oil R U U R R R R R R R

Toluene U U U U U U U R M X

Trichloro Ethyloe M U U U U U U R M R

Triethanol Amine M R R R U U X U U R

Turbine Oil R U U U R R U R R R

Turpentine R U U U R U U R M R

UCDN 50HB280X R R R R X X R R X X

Univs J-43 R U U R R R U R X X

Varnish R U U U U M U R M X

Vinegar R R R R U U R R M R

Water R R R R U U R R R R

Wheat Germ Oil R U U M R R R R X X

Whiskey & Wine R R R R U U R R R R

Wood Oil R U U R X M U R M R

One Year Limited Warranty

DELAWARE MANUFACTURING INDUSTRIES CORPORATION, HEREINAFTER REFERRED TO AS DMIC, WARRANTS ITS PRODUCTS(CONSUMABLE ITEMS EXCEPTED) TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP, UNDER NORMAL USE ANDSERVICE, FOR A PERIOD OF SIX MONTHS FROM DATE OF INITIAL USE, OR ONE YEAR FROM DATE OF SHIPMENT FROM FACTORY,WHICHEVER IS FIRST. THIS LIMITED WARRANTY IS EFFECTIVE ONLY IF THE EQUIPMENT OR APPARATUS IS USED AS DIRECTED, ISNOT SUBJECTED TO MISUSE, NEGLIGENCE, OR ACCIDENT, AND IS NOT ALTERED, TREATED, OR REPAIRED BY ANYONE OTHERTHAN DMIC TECHNICAL STAFF.

THE BUYER’S EXCLUSIVE REMEDY FOR BREACH OF THIS LIMITED WARRANTY SHALL BE, AT THE SOLE DISCRETION OF DMIC,EITHER REPAIR OR REPLACEMENT OF THE NON-CONFORMING MATERIAL BY DMIC, OR REIMBURSEMENT BY DMIC FOR THEPRICE OF SAID NON-CONFORMING MATERIAL. IN ORDER TO OBTAIN SAID REMEDY, THE BUYER SHALL DELIVER WRITTEN NOTICEOF THE ALLEGED BREACH AND REQUEST A RETURN GOODS AUTHORIZATION (“RGA”) FROM DMIC. THE BUYER SHALL RETURNTHE NON-CONFORMING MATERIAL TO DMIC FREIGHT PREPAID WITHIN THIRTY DAYS AFTER THE BUYER HAS BEEN GRANTED THERGA.

NO INCIDENTAL, PROXIMATE, CONSEQUENTIAL, OR OTHER DAMAGES SHALL BE RECOVERABLE. DMIC SHALL NOT BE LIABLE FORCONSEQUENTIAL DAMAGES OR CONTINGENT LIABILITIES INCLUDING, BUT NOT LIMITED TO, LOSS OF LIFE, PERSONAL INJURY, LOSSOF CROPS, LOSS DUE TO FIRE OR WATER PROPERTY DAMAGE, AND CONSEQUENTIAL TRADE OR OTHER COMMERCIAL LOSS ARISINGOUT OF THE FAILURE OF THE DMIC PRODUCT.

ALL WARRANTIES EXPRESS OR IMPLIED ARE SET FORTH IN THIS LIMITED WARRANTY; THERE ARE NO WARRANTIES WHICHEXTEND BEYOND THE DESCRIPTION ON THE FACE OF THIS SAID LIMITED WARRANTY. DMIC MAKES NO WARRANTIES OFFREEDOM FROM PATENT INFRINGEMENT, OR MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, OR ARISING FROM ACOURSE OF DEALING OR USAGE OF TRADE OR OTHER LIKE OR DIFFERENT EXPRESSED OR IMPLIED WARRANTIES, EXCEPT ASMADE ABOVE.

DUE TO OUR POLICY OF CONTINUAL PRODUCT IMPROVEMENT, THE SPECIFICATIONS IN THIS CATALOG MAY CHANGE WITHOUTNOTICE. WHEN DESIGNING BY SPEC, PLEASE REQUEST A CERTIFIED PRINT.

DMIC Ball Valves Catalog Document No. DBV-0101ECopyright © 2001 Delaware Manufacturing Revision 0

Full Member, NFPANational Fluid PowerAssociation, U.S.A.

23 Hannover DriveSt. Catharines, ON L2W 1A3Tel. (905) 688-3642Fax (905) 688-9993

2205 Kenmore AvenueBuffalo, NY 14207Tel. (716) 874-9710Fax (716) 874-8759

Lange Voorhout 622514EH The HagueTel. 31 70 392 1063Fax 31 70 392 1059

www.dmic.com

Call toll free 1-800-248-DMIC (3642). In Canada, please call 1-800-320-3642.

Delaware ManufacturingIndustries Corporation

Authorized Distributor:

Save time and moneywith ‘SSW’ System

‘SNS’ Suction LineSimplifier

Installs in reservoir hole to providevalve mounting point, baffle tube /strainer internal thread. Pilot for neatpositioning, swivel allows valvealignment after welding phase.

Dual Limit Switch Bracketwith Integrated Lockout

Send input to the PLC and enableOSHA compliance with this dualpurpose accessory. Also available insingle switch model. See the fullrange of accessories on page 12 !

O-Ring Sealing right up to6” bore

DMIC’s ESAE Extended O-Ring Bosssystem allows you to completelyeliminate NPT from power units !

Adapters in Inline, 45°and 90° configurations

Designers of innovative powerunits can implement floodedsuctions and ganged inlets tomatch any reservoir style. ‘SSW’adapters are dimensionallyinterchangeable between U.S. &Metric thread models.

Step sizeadapters

One size steps canfrequently ship thesame day. Designerscan now maintainnominal ID’s evenacross hose runs..

Are you still using NPT fittings in your suction lines ? Throw away your buggywhips !

Many users who now swear by DMIC’s ‘SSW’ System were a little skeptical, too. Frequently,the purchase price of ‘SSW’ adapters is higher than the low cost NPT fittings they replace.When we tried to demonstrate how spending a little more on the suction line could savethousands in fabrication cost, cavitation-toasted pumps, start-up filtration, leakage, andwarranty returns, a majority of first time users accommodated us with a prototype ‘SSW’ HPU.

Today, the user list of DMIC ‘SSW’ reads like the “Who’s Who” of quality power unitfabrication in North America. Don’t take our word for it - next time you see a power unit thatlooks impressively crafted, look for DMIC Ball Valves and ‘SSW’ System - it’ll be there.

Documents

DMIC Ball Valves - Valves and Fittings Of Houston, Inc.valvesandfittingsofhouston.com/pdf/DMIC/Full Ball Valves Catalog.pdf · BV3H 3-Way Steel Selector Ball Valves, 6000 PSI