Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
LCD Digital Panel MetersFEATURES
SPECIFICATIONS ORDERING INFO
Specifications Installation and Operating Instructions
C-TON INdusTrIes • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • emaIl: [email protected]
4½ Digit LCD with Loop Powered Board
Low-cost,high-performancereplacementformanyOEMDPMs OptionalRED,GREEN,AMBERorPOSGREENbacklitLCD Snap-inbezelmounteliminatesmountinghardware ResistanttoRFandEMI 4½digitswithhigh-contrastLCD 4-20mAlooppoweredinput Userselectable,displayedengineeringunits ClampandgasketforNEMAapplications
DISPLAY Digits: 4½digits(±19999counts) Type: 0.45"(11.4mm)7segmentLCD Backlighting: OptionalRedNegative (rednumbers/blackbackground) OptionalGreenNegative (greennumbers/blackbackground) OptionalAmberNegative (ambernumbers/blackbackground) OptionalGreenPositive (blacknumbers/greenbackground) Polarity: automatic,“-”displayed Annunciators: °F,°C,PSI,%,userselectable DecimalPoints: 4position,userselectable Overrange: fourlowerorderdigitsblankfor inputs>19999&<-19999INPUTS Ranges: 4-20mADC Configuration: bipolardifferential Impedance: 300ΩnominalPERFORMANCE Accuracy: ±(0.1%fs+2count) ConversionRate: 3persecond NormalModeRejection: >30dB@60Hz CommonModeRange: ±1VDCmax CommonModeRej.: >86dB Adjustments: span(gain)andzero(offset) Warmup: 10minutestypical TemperatureCoeff.: ±100ppmper°CtypicalENVIRONMENT OperatingRange: 0to50°C StorageRange: -10to70°CPOWER SUPPLY poweredbythemilliampcontrolloop OptionalBacklight: 24VDCat35mAtypicalMOUNTING snap-inbezelmountorclampandgasketCONNECTION 2screwterminal(4withbacklight)
PART NUMBER BACKLIGHT COLOR BACKLIGHT POWER
DK790-XEC.......................... NOBACKLIGHT.......................................NONE
DK791-XEC............................ NEGAMBER.......................................24VDC
DK794-XEC...............................NEGRED..........................................24VDC
DK793-XEC.............................NEGGREEN........................................24VDC
DK795-XEC.............................POSGREEN........................................24VDC
ACCESSORIES
PW2-24................................... Regulated120VACto24VDCPowerSupply
PW1.0..........................................................24VACtoadjustableDCoutput
PW1.5..........................................................24VACtoadjustableDCoutput
CVC..............................................................................................Calibrator
DK790-XEC
C-TON INdusTrIes • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • emaIl: [email protected]
LCD Digital Panel Meters
C-TON INdusTrIes • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • emaIl: [email protected]
Specifications Installation and Operating Instructions
4½ Digit LCD with Loop Powered Board
DIMENSIONS
JUMPER SELECTION & WIRING1. DECIMAL SELECTION
19999
1999.9
199.99
19.999
1.9999
2. J1, J2, J3 SELECTION IF:MINDISPLAYIS=0or MINDISPLAYIS>0and MAXDISPLAY÷MINDISPLAY≥5
IF:MINDISPLAYIS>0and MAXDISPLAY÷MINDISPLAY<5
WIRING
J7J6J5J4
J3J2J1
J3J2J1
(lower)
°F°CPSI%
DK790-XEC
3. SPAN JUMPER SECTION: SPANFACTOR SETJUMPERS 0-12 L 10-22 M 22-32 HIF: MINDISPLAYIS≤0or MINDISPLAYIS>0and MAXDISPLAY÷MINDISPLAY>5THEN: SPANFACTOR= 2.5(MAXDISPLAY-MINDISPLAY) 4000+0.02(MINDISPLAY)-0.004 (MAXDISPLAY)IF: MINDISPLAYIS>0and MAXDISPLAY÷MINDISPLAY≤5THEN: SPANFACTOR= MAXDISPLAY-MINDISPLAY 1600
4. ZERO (OFFSET) JUMPER SELECTION: ZEROFACTORSETJUMPERS 0-3994 H 3320-7314 M 6640-10634 LIF: MINDISPLAYIS≤0or MINDISPLAYIS>0and MAXDISPLAY÷MINDISPLAY>5THEN: ZEROFACTOR=(250000+MINDISPLAY) X(83834)-73200 (250000+400(SPANFACTOR))IF: MINDISPLAYIS>0and MAXDISPLAY÷MINDISPLAY≤5THEN: ZEROFACTOR=10634-(MINDISPLAY-400(SPANFACTOR)X83834 250000