DISASSEMBLY INSTRUCTIONS FOR SHOE

CAGE UNIT.

Frank J Attilio

Step 1 – Remove plexi inlays.

Safely put your fingers under the inlays and lift up. You will have to tilt the unit to remove the bottom inlays.

Frank J Attilio

Step 2 – Turn the unit on to its side for a more safe disassembly.

Frank J Attilio

Step 3 – Remove screws from stretchers.

USING A PHILLIPS HEAD SCREW DRIVER REMOVE THE SCREWS AND SAVE THEM.

Frank J Attilio

Step 4 – Safely Remove the End panels from the stretchers.

LIFTING EVENLY ON BOTH THE TOP AND BOTTOM ENDS OF THE END PANEL SAFELY REMOVE FROM STRETCHERS.

Frank J Attilio

Step 5 – Remove the unscrewed stretcher from the end panel.

LIFT UP THE STRETCHERS.

Frank J Attilio

Repeat steps 2-5 for the remaining sections until the unit is completely

disassembled.

Frank J Attilio