Direct Glazing for Professionals

• Fast safe drive-away time of 30 minutes• HMLC (high modulus, low conductivity)• Cold applied (no warm up needed) • Very good sag resistance

TEROSON PU 8730 HMLC

www.vehicle-repair-solutions.com

The new TEROSON PU 8730 HMLC will make your professional windscreen replacement job even faster and more efficient. The product is cold-applied and has only 30 minutes safe drive away time which was tested according to the US Crash-Norm FMVSS 208/212.

Find out more of the new product solution with the well known premium quality of the TEROSON brand.

Key Benefits of TEROSON PU 8730 HMLC

• High cure rate - skin performance 10 min• High elastic and shear strength, even after aging • Good adhesion to the remaining material • High UV resistance

Except as otherwise noted, all marks used above in this printed material are trademarks and/or registered trademarks of Henkel and/or its affiliates in the US, Germany, and elsewhere. © Henkel AG & Co. KGaA, 2014

Technical Data

Technology 1 compontent polyurethane

Application method: cold applied

Glazing time: max. 10 min

Drive away time: 30 minutes after the window has been bondedCrash-Norm: FMVSS 208/212 with airbag

Product Pack size IDH Nr. VE

TEROSON PU 8730 HMLC 400 ml foil pack 1883930 20 pieces

TEROSON PU 8519 P All-in-one Primer

100 ml bottle 1178026 10 pieces

TEROSON VR 20Surface pretreatment

1 l bottle10 l canister

16967041471127

12 pieces1 piece

The windscreen replacement kit for professionals comes with 20 x 400 ml foil packs and a matching quantity of Henkel-designed foil pack nozzles for more efficiency and less consumption.

We recommend TEROSON PU 8519 P All-in-one Primer. It is available in 100 ml bottles, a perfect primer size for professional use. The best choice for surface pretreatment is TEROSON VR 20, available in 1 l bottles or 10 l canisters.

Find out more of the new product solution with the well known premium quality of the TEROSON brand.

The data contained herein are intended as reference only. Please contact Henkel Technical Support Group for assistance and recommendation on specifications for these products.

Henkel AG & Co.KGaAHenkelstrasse 6740589 Düsseldorf Tel.: (+49) 211 797-0www.loctite.com

Henkel AG & Co.KGaAStandort HeidelbergHenkel Teroson Strasse 5769123 Heidelberg Tel.: (+49) 6221 704-0www.vehicle-repair-solutions.com

Features and Benefits

Product Order Information