DIRECT FIRED ABSORPTION CHILLER & HEATER - …lenergy.hu/dokuk/termekek/51/yiw9sd8v.pdf · Cooling capacity USRT 120 150 180 ... Cooling tower type SCTM 175 200 250 300 350 400 400

DIRECT FIRED ABSORPTION CHILLER & HEATER

MODEL : SAB-DF012~070E1 SAB-DF012~100G1

. CHP Solution IncCHP Solution IncCHP Solution IncCHP Solution Inc

Excellent Performance with More Energy Savings, Excellent Performance with More Energy Savings, Excellent Performance with More Energy Savings, Excellent Performance with More Energy Savings, Excellent EfficExcellent EfficExcellent EfficExcellent Efficiency at iency at iency at iency at Much Lower CostMuch Lower CostMuch Lower CostMuch Lower Cost.... At Cention, basing ourselves on cooling technology and know-how acquired over many years, we put into practice our latest proprietary technology. Through the use of large chilled water/cooling water temperature differential adaptability and provision of a high-functionality microcomputer as a standard control panel, superior reliability and durability are realized, while achieving running efficiency. As an item of new-age cooling equipment Cention’s one step advanced chiller contributes to the realization of total energy-saving and low cost in air-conditioning system. Low Energy and Low CostLow Energy and Low CostLow Energy and Low CostLow Energy and Low Cost -By means of the new cooling water flow system (ACA flow), a standard frame size accommodating large chilled water/cooling water temperature differential is realized. By improvement of control of solution circulating quantity, a 10% improvement in average load factor is achieved in partial load characteristics.

High ReliabilityHigh ReliabilityHigh ReliabilityHigh Reliability -A high functionality microcomputer control panel with a complete set of preventive maintenance and abnormality forecast functions is a standard feature. Standard cooling capability realizing up to 4,000 hrs/yr operation.

Superior Operability and Easy MaintenanceSuperior Operability and Easy MaintenanceSuperior Operability and Easy MaintenanceSuperior Operability and Easy Maintenance -Operating condition or abnormalities are quickly shown on easy-to-see liquid crystal digital and LED displays. Full automation of purging operation is realized by use of water ejector purging device which does not use electricity and can purge out any non-condensed gases. Compatible with air conditioning system interfaces and supports introduction of remote supervision system.

LargeLargeLargeLarge----TemperatureTemperatureTemperatureTemperature----Differential System.Differential System.Differential System.Differential System.

-By using the large-temperature-differential system, the circulating volumes of chilled and cooling water can be reduced. The large-temperature-differential system reduces power needed for circulating air and water, because of reduced volumes of the draught from the air conditioner fan and of the circulating water from the chilled and cooling water pumps. In addition, it makes such facilities as air ducts and chilled/cooling water pipes smaller, and also reduces the initial cost for them.

Efficiency Operation.Efficiency Operation.Efficiency Operation.Efficiency Operation. -In addition to the parallel flow system, Cention's new proprietary flow technology (ACA flow technology) is employed in the cooling water system. Without increasing the chiller frame size, the adaptation to large chilled/cooling water temperature differentials has been made possible. Accordingly, energy-saving and low operating cost (by reduction of start-up and other operating costs) are achieved not only for the chiller but for air-conditioning as well.

High Performance Microcomputer.High Performance Microcomputer.High Performance Microcomputer.High Performance Microcomputer. -Electric power saving with large-temperature differential chilled/cooling water system.

Stable and reliable operation witStable and reliable operation witStable and reliable operation witStable and reliable operation with crystallization freeh crystallization freeh crystallization freeh crystallization free In the parallel flow system, the diluted solution coming out of the absorber is divided into two flows. These two flows of solution are sent to the high-temperature and low-temperature generators separately. The system holds the flow pressure of the high-temperature generator lower than the series flow(indicated by “ ” in the figure), while keeping an enough margin for crystallization in a low-temperature condition (indicated by “ ” in the figure). In addition, the performance of absorption cycle is increased because the rate of solution flow into the high-temperature generator is made lower than that of series flow.

SSSSpecificationspecificationspecificationspecifications

1) 1) 1) 1) High Efficiency Specifications (COP 1.32~1.35 MODEL)

Standard condition(12-7℃℃℃℃/ 32-37℃℃℃℃)(COP 1.32)

Model Item

SAB-DF

012E1 015E1 018E1 021E1 024E1 028E1 032E1

Cooling capacity USRT 120 150 180 210 240 280 320

kW 422 527 633 738 844 985 1,125

Heating capacity Mcal/h 363 436 508 581 678 726 860

kW 422 507 591 676 788 844 1,000

Chilled water

Temperature Inlet 12 Outlet 7

Flow rate /h 72.6 90.7 108.9 127 145.2 169.3 193.5

PD kPa 70 107 73 64 82 61 103

Connection A 100 100 125 125 125 150 150

PASS - Odd Odd Odd Even Even Odd Odd

Cooling water


Flow rate /h 120 150 180 210 240 280 345

PD kPa 74 110 77 67 85 64 80

Connection A 125 125 150 150 150 200 200


Hot water

Inlet temp. 55 55.2 55.3 55.4 55.3 55.7 55.7

Outlet temp 60 60 60 60 60 60 60

Flow rate /h 72.6 90.7 108.9 127 145.2 169.3 193.5

PD kPa 70 107 73 64 82 61 103

Connection A 100 100 125 125 125 150 150


Electric capacity

50Hz kVA 7.8 10.4 10.4 10.0 10.9 10.9 10.9

60Hz kVA 7.7 11.6 11.6 9.9 10.7 10.7 10.7

Electric motor power 60Hz(50Hz)

Sol. Pump kW 1.1+1.1 3.7(2.2)+1.1 3.7(2.2)+1.1 2.2+1.1 2.2+1.1 2.2+1.1 2.2+1.1

Ref. Pump kW 0.2 0.4 0.4 0.4 0.4 0.4 0.4

Burner fan kW 1.5 1.5 1.5 1.5 2.2 2.2 2.2

Gas consumption

(13A)

Cooling N /h 25 31.2 37.4 43.7 49.9 58.2 66.6

Heating N /h 37.8 45.3 52.8 60.4 70.5 75.5 89.4

Input supply

pressure mmAq 200~4000

Exhaust gas connection mm 266X266 355X355 398X364

dimensions (inside)

Length(L) mm 3,353 3,408 3,791 4,591

Width(W) mm 1,955 1,955 1,955 1,955

Height(H) mm 2,419 2,419 2,419 2,419 Operating weight Ton 6.6 7.7 7.8 9.1 10.6 10.6 12.2

Rigging weight Ton 6.2 7.2 7.3 8.4 9.8 9.8 11.3

Insulation area

Hot Surface 16 16 18 20 20 24 24

Cold Surface 8 8 10 12 12 14 14

Contained water

Chilled water 0.2 0.2 0.25 0.3 0.3 0.36 0.36

Cooling water 0.32 0.32 0.38 0.45 0.45 0.54 0.54

Cooling tower type SCTM 175 200 250 300 350 400 400

Standard condition(12-7℃℃℃℃/ 32-37℃℃℃℃)(COP 1.32)

NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply pressure water is 780 kPa G(8 kg/ G). or operation of remote on/off 4. control range for Standard specification (Capacity,

chilled/cooling water) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N).

6. Exhaust gas of NOX is 45 ppm(O2=5%)

Model Item

SAB-DF

036E1 040E1 045E1 050E1 056E1 063E1 070E1


kW 1,266 1,407 1,582 1,758 1,969 2,215 2,461

Heating capacity Mcal/h 1,001

1,110 1,252 1,387 1,490 1,665 1,947

kW 1,164 1,291 1,456 1,613 1,733 1,936 2,264

Chilled water


Flow rate /h 217.7 241.9 272.2 302.4 338.7 381.0 423.4

PD kPa 59 59 106 110 67 67 89

Connection A 150 150 200 200 200 200 200

PASS - Odd Odd Odd Odd Even Even Even

Cooling water


Flow rate /h 360 400 450 500 560 630 700

PD kPa 58 116 79 97 46 58 76

Connection A 200 200 250 250 300 300 300

PASS - Odd Even

Odd Odd Even

Even

Even

Hot water

Temperature Inlet 55.4 Outlet 60 55.6 / 60 55.4 / 60

Flow rate /h 217.7 241.9 272.2 302.4 338.7 381.0 423.4

PD kPa 59 59 106 110 67 67 89

Connection A 150 150 200 200 200 200 200


Electric capacity

50Hz kVA 14.9 14.9 14.9 14.9 19.3 19.3 19.3

60Hz kVA 15.5 15.5 15.5 15.5 19.6 19.6 19.6

Electric motor power

60Hz(50Hz)

Sol. Pump kW 3.7+2.2 3.7+2.2 3.7+2.2 3.7+2.2 4.5+2.2 4.5+2.2 4.5+2.2

Ref. Pump kW 0.4 0.4 0.4 0.4 0.75 0.75 0.75

Burner fan kW 3.7 3.7 3.7 3.7 5.5 5.5 5.5

Gas consumption

(13A)

Cooling N /h 74.9 83.2 93.6 104 116.5 131 145.6

Heating N /h 104.1 115.4 130.2 144.2 154.9 173.2 202.5

Input supply

pressure mmAq 200 ~ 4,000


440X656 440X788

dimensions (inside)

Length(L) mm 5,034 5,807 7,183 7,883

Width(W) mm 2,131 2,395 2,468 2,468

Height(H) mm 3,102 3,102 3,102 3,102

Operating weight Ton 16.5 16.5 20.6 20.6 25.5 25.5 27.9

Rigging weight Ton 14.9 14.9 18.8 18.8 23.3 23.3 25..5

Insulation area Hot Surface 32 32 36 36 41 41 46

Cold Surface 14 14 17 17 20 20 23

Contained water

Chilled water 0.50 0.50 0.60 0.60 0.71 0.71 0.82

Cooling water 1.06 1.06 1.22 1.22 1.38 1.38 1.54


Large temperature differentials condition(15-7℃℃℃℃/ 32-37℃℃℃℃) (COP 1.35)

Model Item

SAB-DF

012EA 015EA 018EA 021EA 024EA 028EA 032EA


kW 422 527 633 738 844 985 1,125


kW 422 507 591 676 788 844 1,000

Chilled water


Flow rate /h 45.4 56.7 68.0 79.4 90.7 105.8 121

PD kPa 57 87 74 79 102 54 79

Connection A 80 80 100 100 100 125 125

PASS - Odd Odd Odd Even

Even

Even

Even

Cooling water


Flow rate /h 120 150 180 210 240 280 345

PD kPa 74 110 77 67 85 64 80

Connection A 125 125 150 150 150 200 200


Even

Odd Odd

Hot water

Inlet Temp. 52 52.3 52.5 52.7 52.5 53.1 53.2

Outlet Temp 60 60 60 60 60 60 60

Flow rate /h 45.4 56.7 68.0 79.4 90.7 105.8 121

PD kPa 57 87 74 79 102 54 79

Connection A 80 80 100 100 100 125 125


Even

Even

Even

Electric

capacity

50Hz kVA 7.8 10.4 10.4 10.0 10.9 10.9 10.9

60Hz kVA 7.7 11.6 11.6 9.9 10.7 10.7 10.7

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 1.1+1.1 3.7(2.2)+1.1 3.7(2.2)+1.1 2.2+1.1 2.2+1.1 2.2+1.1 2.2+1.1

Ref. Pump kW 0.2 0.4 0.4 0.4 0.4 0.4 0.4

Burner fan kW 1.5 1.5 1.5 1.5 2.2 2.2 2.2

Gas

consumption

(13A)

Cooling N /h 24.5 30.6 36.7 42.8 49.0 57.1 65.1

Heating N /h 37.8 45.3 52.8 60.4 70.5 75.5 89.4

Input supply

pressure mmAq 200~4,000


dimensions

(inside)

Length(L) mm 3,353 3,408 3,791 4,591

Width(W) mm 1,955 1,955 1,955 1,955

Height(H) mm 2,419 2,419 2,419 2,419



Insulation

area

Hot Surface 16 16 18 20 20 24 24 Cold Surface 8 8 10 12 12 14 14

Contained

water

Chilled water 0.2 0.2 0.25 0.3 0.3 0.36 0.36 Cooling water 0.32 0.32 0.38 0.45 0.45 0.54 0.54


Large temperature differentials condition(15-7℃℃℃℃/ 32-37℃℃℃℃) (COP 1.35)

Model Item

SAB-DF

036EA 040EA 045EA 050EA 056EA 063EA 070EA


kW 1,266 1,407 1,582 1,758 1,969 2,215 2,461

Heating capacity Mcal/h 1,001 1,110 1,252 1,387 1,490 1,665 1,947

kW 1,164 1,291 1,456 1,613 1,733 1,936 2,264

Chilled water


Flow rate /h 136.1 151.2 170.1 189.0 211.7 238.1 264.6

PD kPa 50 53 92 100 65 82 114

Connection A 125 125 150 150 150 150 150

PASS - Even

Even

Even

Even

Odd Odd Odd

Cooling water


Flow rate /h 360 400 450 500 560 630 700

PD kPa 58 116 79 97 46 58 76

Connection A 200 200 250 250 300 300 300

PASS - Odd Even Odd Odd Even Even Even

Hot water

Temperature. 52.6 / 60 52.7 / 60 52.6 / 60 52.7 / 60 53 / 60 53 / 60 52.6 / 60

Flow rate /h 136.1 151.2 170.1 189.0 211.7 238.1 264.6

PD kPa 50 53 92 100 65 82 114

Connection A 125 125 150 150 150 150 150

PASS - Even

Even

Even

Even

Odd Odd Odd

Electric capacity 50Hz kVA 14.9 14.9 14.9 14.9 19.3 19.3 19.3

60Hz kVA 15.5 15.5 15.5 15.5 19.6 19.6 19.6

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 3.7+2.2 3.7+2.2 3.7+2.2 3.7+2.2 4.5+2.2 4.5+2.2 4.5+2.2

Ref. Pump kW 0.4 0.4 0.4 0.4 0.75 0.75 0.75

Burner fan kW 3.7 3.7 3.7 3.7 5.5 5.5 5.5

Gas consumption

(13A)

Cooling N /h 74.9 83.2 93.6 104 116.5 131 145.6

Heating N /h 104.1 115.4 130.2 144.2 154.9 173.2 202.5

Input supply


Exhaust gas connection mm 440X436 440X524 440X656 440X788

Dimensions

(inside)

Length(L) mm 5,034 5,807 7,183 7,883

Width(W) mm 2,131 2,395 2,468 2,468

Height(H) mm 3,102 3,102 3,102 3,102


Rigging weight Ton 14.9 14.9 18.8 18.8 23.3 23.3 25..5


Cold Surface 14 14 17 17 20 20 23

Contained

water

Chilled water 0.50 0.50 0.60 0.60 0.71 0.71 0.82

Cooling water 1.06 1.06 1.22 1.22 1.38 1.38 1.54

Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply pressure water is 780 kPa G(8 kg/ G). or operation of remote on/off 4. control range for Standard specification (Capacity, 10. If you use the oil fuel(light oil), combustion system should be changed

chilled/cooling water) in cooling mode is 100~25%. from over 360RT. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N).


2) 2) 2) 2) Standard Efficiency Specifications (COP 1.2 MODEL)

Standard condition (12-7℃℃℃℃/32-37℃℃℃℃)

Model Item

SAB-DF

012G1 015G1 018G1 021G1 024G1 028G1 032G1


kW 422 527 633 738 844 985 1,125


kW 386 500 537 679 779 866 1,000

Chilled water


Flow rate /h 72.6 90.7 108.9 127.0 145.2 169.3 193.5

Pressure kPa 68 85 87 82 88 96 101

Connection A 100 100 125 125 125 150 150

PASS - Even

Even

Odd Even

Even

Odd Odd

Cooling water


Flow rate /h 130 162 195 228 260 303 345

Pressure kPa 97 88 84 93 95 93 80

Connection A 125 125 150 150 150 200 200

PASS - Odd Even Odd Even Even Odd Odd

Hot water

Temperature Inlet 55.4 Outlet 60 Inlet 55.6 , Outlet 60

Flow rate /h 72.6 90.7 108.9 127.0 145.2 169.3 193.5

Pressure kPa 68 85 87 82 88 96 101

Connection A 100 100 125 125 125 150 150

PASS - Even Even Odd Even Even Odd Odd

Electric

capacity

50Hz kVA 7.9 9.8 10.2 10.3 11.3 14.9 14.9

60Hz kVA 7.8 9.7 10.1 10.2 11.1 16.4 16.4

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 1.1+1.1 2.2+1.1 2.2+1.1 3.7 3.7 5.5 5.5

Ref. Pump kW 0.2 0.2 0.4 0.4 0.4 0.4 0.4

Burner fan kW 1.5 1.5 1.5 1.5 2.2 3.7 3.7

Gas

consumption

(13A)

Cooling N /h 28.3 35.4 42.5 49.6 56.6 66.1 75.5

Heating N /h 34.6 44.8 48.1 63.7 69.7 77.5 89.4

Input supply



Dimensions

(inside)

Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950

Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988

Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248



Insulation

area

Hot Surface 13 14 15 16 18 20 20

Cold Surface 7 7 8 10 10 12 12

Contained

water

Chilled water 0.138 0.148 0.183 0.203 0.219 0.253 0.273

Cooling water 0.233 0.27 0.344 0.372 0.432 0.465 0.539


Standard condition (12-7℃℃℃℃/32-37.3℃℃℃℃)

Model Item

SAB-DF

036G1 040G1 045G1 050G1 056G1 060G1 070G1


kW 1,266 1,407 1,582 1,758 1,969 2,110 2,461


kW 1,291 1,291 1,613 1,613 1,936 1,936 2,264

Chilled water


Flow rate /h 217.7 241.9 272.2 302.4 338.7 362.9 423.4

PD kPa 116 118 114 117 65 63 55

Connection A 150 150 200 200 200 200 200


Cooling water

Temperature Inlet 32 Outlet 37.3

Flow rate /h 360 400 450 500 560 600 700

Pressure kPa 89 92 94 101 161 162 157

Connection A 200 200 250 250 300 300 300

PASS - Odd Odd Odd Odd Odd Odd Odd

Hot water

Temperature 54.9/60 55.4/60 54.9/60 55.4/60 55.1/60 55.4/60 55.4/60

Flow rate /h 217.7 241.9 272.2 302.4 338.7 362.9 423.4

PD kPa 116 118 114 117 65 63 55

Connection A 150 150 200 200 200 200 200


Electric

capacity

50Hz kVA 18.8 18.8 22.9 22.9 29.7 29.7 33.5

60Hz kVA 17.8 17.8 23.2 23.2 30.2 30.2 33.7

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 4.5+2.2 4.5+2.2 5.5+3.7 5.5+3.7 7.5+3.7 7.5+3.7 7.5+3.7

Ref. Pump kW 0.75 0.75 1.5 1.5 1.5 1.5 1.5

Burner fan kW 3.7 3.7 3.7 3.7 5.5 5.5 5.5

Gas

consumption

(13A

Cooling N /h 82.5 91.6 103.1 114.5 128.3 137.5 160.4

Heating N /h 115.5 115.5 144.3 144.3 173.2 173.2 202.5

Input supply


10,000 Exhaust gas connection mm 440X436 440X520 440X788

Dimensions

(inside)

Length(L) mm 5,150 5,150 5,920 6,100

Width(W) mm 2,440 2,480 2,550 3,350

Height(H) mm 2,650 2,940 3,040 3,480



Insulation

area

Hot Surface 33 33 37 37 44 44 47

Cold Surface 13 13 16 16 19 19 22

Contained

water

Chilled water 0.53 0.56 0.65 0.68 0.74 0.77 0.98

Cooling water 1.14 1.2 1.4 1.46 1.65 1.73 2.5

Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply pressure water is 780 kPa G(8 kg/ G). or operation of remote on/off control 4. control range for Standard specification (Capacity,



Standard condition (12-7℃℃℃℃/32-37.3℃℃℃℃)

Model Item

SAB-DF

080G1 090G1 100G1

Cooling capacity USRT 800 900 1,000

kW 2,813 3,165 3,516

Heating capacity Mcal/h 2,318 2,318 2,800

kW 2,695 2,695 3,256

Chilled water


Flow rate /h 483.8 544.3 604.8

PD kPa 60 100 104

Connection A 250 250 250

PASS - Even Even Even

Cooling water

Temperature 32 / 37.3 32 / 37.9

Flow rate /h 800 820 900

PD kPa 130 182 184


PASS - Odd Odd Odd

Hot water

Temperature 55.2/60 55.7/60 55.4/60

Flow rate /h 483.8 544.3 604.8

PD kPa 60 100 104


PASS - Even Even Even

Electric

capacity

50Hz kVA 35.9 43.9 43.9

60Hz kVA 36.0 42.8 42.8

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 7.5+3.7 7.5+5.5 7.5+5.5

Ref. Pump kW 1.5 1.5 1.5

Burner fan kW 7.5 7.5 7.5

Gas

consumption

(13A)

Cooling N /h 188.8 212.4 236.0

Heating N /h 241.1 241.1 291.2

Input supply


Exhaust gas connection mm 440x788 440x1096

Dimensions

(inside)

Length(L) mm 6,400 7,250

Width(W) mm 3,350 3,350

Height(H) mm 3,480 3,480

Operating weight Ton 36.9 43.3 44

Rigging weight Ton 33.5 39.7 40.2

Insulation

area

Hot Surface 54 60 67

Cold Surface 25 28 31

Contained

water

Chilled water 1.03 1.11 1.17

Cooling water 2.62 2.85 2.98

Cooling tower type SCTM 1,200 1,400 1,600

Large temperature differentials condition(15-7℃℃℃℃/ 32-37℃℃℃℃)

Model Item

SAB-DF

012GA 015GA 018GA 021GA 024GA 028GA 032GA


kW 422 527 633 738 844 985 1,125


kW 386 500 537 679 779 866 1,000

Chilled water


Flow rate /h 45.4 56.7 68 79.4 90.7 105.8 121

PD kPa 58 74 98 67 72 74 79

Connection A 80 80 100 100 100 125 125

PASS - Even Even Odd Odd Odd Even Even

Cooling water


Flow rate /h 130 162 195 228 260 303 345

PD kPa 97 88 84 93 95 93 80

Connection A 125 125 150 150 150 200 200


Hot water

Temperature 52.7 / 60 52.4 / 60 53.2 / 60 52.6 / 60 52.6 / 60 53 / 60 52.9 / 60

Flow rate /h 45.4 56.7 68 79.4 90.7 105.8 121

PD kPa 58 74 98 67 72 74 79

Connection A 80 80 100 100 100 125 125


Electric

capacity

50Hz kVA 7.9 9.8 10.2 10.3 11.3 14.9 14.9

60Hz kVA 7.8 9.7 10.1 10.2 11.1 16.4 16.4

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 1.1+1.1 2.2+1.1 2.2+1.1 3.7 3.7 5.5 5.5

Ref. Pump kW 0.2 0.2 0.4 0.4 0.4 0.4 0.4

Burner fan kW 1.5 1.5 1.5 1.5 2.2 3.7 3.7

Gas

consumption

(13A)

Cooling N /h 28.3 35.4 42.5 49.6 56.6 66.1 75.5

Heating N /h 34.6 44.8 48.1 63.7 69.7 77.5 89.4

Input supply

pressure

mmAq 200~4,000


Dimensions

(inside)

Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950

Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988

Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248




Cold Surface 7 7 8 10 10 12 12

Contained

water

Chilled water 0.138 0.148 0.183 0.203 0.219 0.253 0.273

Cooling water 0.233 0.27 0.344 0.372 0.432 0.465 0.539


Large temperature differentials condition(15-7℃℃℃℃/ 32-37.3℃℃℃℃)

Model Item

SAB-DF

036GA 040GA 045GA 050GA 056GA 060GA 070GA


kW 1,266 1,407 1,582 1,758 1,969 2,110 2,461


kW 1,291 1,291 1,613 1,613 1,936 1,936 2,264

Chilled water


Flow rate /h 136.1 151.2 170.1 189.0 211.7 226.8 264.6

PD kPa 111 113 109 112 87 84 73

Connection A 125 125 150 150 150 150 150

PASS - Even Even Even Even Odd Odd Odd

Cooling water


Flow rate /h 360 400 450 500 560 600 700

PD kPa 89 92 94 101 161 162 157

Connection A 200 200 250 250 300 300 300


Hot water

Temperature 51.8/60 52.7/60 51.8/60 52.7/60 52.1/60 52.7/60 52.6/60

Flow rate /h 136.1 151.2 170.1 189.0 211.7 226.8 264.6

PD kPa 111 113 109 112 87 84 73

Connection A 125 125 150 150 150 150 150


Electric

capacity

50Hz kVA 18.8 18.8 22.9 22.9 29.7 29.7 33.5

60Hz kVA 17.8 17.8 23.2 23.2 30.2 30.2 33.7

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 4.5+2.2 4.5+2.2 5.5+3.7 5.5+3.7 7.5+3.7 7.5+3.7 7.5+3.7

Ref. Pump kW 0.75 0.75 1.5 1.5 1.5 1.5 1.5

Burner fan kW 3.7 3.7 3.7 3.7 5.5 5.5 5.5

Gas

consumption

(13A)

Cooling N /h 82.5 91.6 103.1 114.5 128.3 137.5 160.4

Heating N /h 115.5 115.5 144.3 144.3 173.2 173.2 202.5

Input supply


10,000 Exhaust gas connection mm 440X436 440X520 440X788

Dimensions

(inside)

Length(L) mm 5,150 5,150 5,920 6,100

Width(W) mm 2,440 2,480 2,550 3,350

Height(H) mm 2,650 2,940 3,040 3,480



Insulation

area

Hot Surface 33 33 37 37 44 44 47

Cold Surface 13 13 16 16 19 19 22

Contained

water

Chilled water 0.53 0.56 0.65 0.68 0.74 0.77 0.98

Cooling water 1.14 1.2 1.4 1.46 1.65 1.73 2.5

Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply pressure water is 780 kPa G(8 kg/ G). or operation of remote on/off 4. control range for Standard specification (Capacity,



Large temperature differentials condition(15-7℃℃℃℃/ 32-37.3℃℃℃℃)

Model Item

SAB-DF

080GA 090GA 100GA

Cooling capacity USRT 800 900 1000

kW 2813 3165 3516

Heating capacity Mcal/h 2318 2318 2800

kW 2695 2695 3256

Chilled water


Flow rate /h 302.4 340.2 378

PD kPa 80 133 138


PASS - Odd Odd Odd

Cooling water

Temperature 32 / 37.3 32 / 37.9

Flow rate /h 800 820 900

PD kPa 130 182 184


PASS - Odd Odd Odd

Hot water

Temperature 55.2/60 55.7/60 55.4/60

Flow rate /h 302.4 340.2 378

PD kPa 80 133 138


PASS - Odd Odd Odd

Electric capacity 50Hz kVA 35.9 43.9 43.9

60Hz kVA 36.0 42.8 42.8

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 7.5+3.7 7.5+5.5 7.5+5.5

Ref. Pump kW 1.5 1.5 1.5


Gas

consumption

(13A)

Cooling N /h 183.3 206.2 229.1

Heating N /h 241.1 241.1 291.2

Input supply



Dimensions

(inside)

Length(L) mm 6,400 7,250

Width(W) mm 3,350 3,350

Height(H) mm 3,480 3,480

Operating weight Ton 36.9 43.3 44

Rigging weight Ton 33.5 39.7 40.2

Insulation

area

Hot Surface 54 60 67

Cold Surface 25 28 31

Contained

water

Chilled water 1.03 1.11 1.17

Cooling water 2.62 2.85 2.98

Cooling tower type SCTM 1,200 1,400 1,600

3) Heating Increase Specifications(120~900RT COP 1.2 MODEL)3) Heating Increase Specifications(120~900RT COP 1.2 MODEL)3) Heating Increase Specifications(120~900RT COP 1.2 MODEL)3) Heating Increase Specifications(120~900RT COP 1.2 MODEL)

Heating increase Standard condition(12-7℃℃℃℃/32-37℃℃℃℃)

Model Item

SAB-DH

012G0 015G0 018G0 021G0 024G0 028G0 032G0


kW 422 527 633 738 844 985 1,125

Heating capacity Mcal/h 430 554 670 670 860 1,110 1,110

kW 500 644 779 779 1,000 1,291 1,291

Chilled water


Flow rate /h 72.6 90.7 108.9 127.0 145.2 169.3 193.5

PD kPa 68 85 87 82 88 96 101

Connection A 100 100 125 125 125 150 150


Cooling water


Flow rate /h 130 162 195 228 260 303 345

PD kPa 97 88 84 93 95 93 80

Connection A 125 125 150 150 150 200 200


Hot water

Temperature 54.1/60 53.9/60 53.8/60 54.7/60 54.1/60 53.4/60 54.3/60

Flow rate /h 72.6 90.7 108.9 127.0 145.2 169.3 193.5

PD kPa 68 85 87 82 88 96 103

Connection A 100 100 125 125 125 150 150



60Hz kVA 7.8 9.7 10.1 10.2 11.1 16.4 16.4

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 1.1+1.1 2.2+1.1 2.2+1.1 3.7 3.7 5.5 5.5

Ref. Pump kW 0.2 0.2 0.4 0.4 0.4 0.4 0.4

Burner fan kW 1.5 1.5 1.5 1.5 2.2 3.7 3.7

Gas

consumption

(13A)

Cooling N /h 28.3 35.4 42.5 49.6 56.6 66.1 75.5

Heating N /h 44.7 57.6 69.7 69.7 89.4 115.4 115.4

Input supply



Dimensions

(inside)

Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950

Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988

Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248




Cold Surface 7 7 8 10 10 12 12

Contained

water

Chilled water 0.138 0.148 0.183 0.203 0.219 0.253 0.273

Cooling water 0.233 0.27 0.344 0.372 0.432 0.465 0.539


Heating increase Standard condition (12(12(12(12----7777℃℃℃℃/32/32/32/32----37373737.3.3.3.3℃℃℃℃))))

Model

Item

SAB-DH

036G0 040G0 045G0 050G0 056G0 060G0 070G0


kW 1,266 1,407 1,582 1,758 1,969 2,110 2,461


kW 1,613 1,613 1,936 1,936 2,264 2,264 2,695

Chilled water


Flow rate /h 217.7 241.9 272.2 302.4 338.7 362.9 423.4

PD kPa 116 118 114 117 65 63 55

Connection A 150 150 200 200 200 200 200


Cooling water


Flow rate /h 360 400 450 500 560 600 700

PD kPa 89 92 94 101 161 162 157

Connection A 200 200 250 250 300 300 300


Hot water

Temperature 53.6/60 54.3/60 53.9/60 54.5/60 54.3/60 54.6/60 54.5/60

Flow rate /h 217.7 241.9 272.2 302.4 338.7 362.9 423.4

PD kPa 116 118 114 117 65 63 55

Connection A 150 150 200 200 200 200 200


Electric capacity 50Hz kVA 18.8 22.9 29.7 33.5

60Hz kVA 17.8 23.2 30.2 33.7

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 4.5+2.2 5.5+3.7 7.5+3.7

Ref. Pump kW 0.75 1.5 1.5


Gas consumption

(13A)

Cooling N /h 82.5 91.6 103.1 114.5 128.3 137.5 160.4

Heating N /h 144.2 144.2 173.2 173.2 202.5 202.5 241.1

Input supply



Dimensions

(inside)

Length(L) mm 5,150 5,150 5,920 6,100

Width(W) mm 2,440 2,480 2,550 3,350

Height(H) mm 2,650 2,940 3,040 3,480




Cold Surface 13 13 16 16 19 19 22

Contained

water

Chilled water 0.53 0.56 0.65 0.68 0.74 0.77 0.98

Cooling water 1.14 1.2 1.4 1.46 1.65 1.73 2.5

Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Heating increase standard condition is just raising the heating calorie. water is 780 kPa G(8 kg/ G). 10. Hot generator is changed for heating increase standard condition therefore 4. control range for Standard specification (Capacity, should check connection between the burner and the combustion system.



Heating increase Standard condition (12-7℃℃℃℃/32-37.3℃℃℃℃)

Model Item

SAB-DH

080G0 090G0

Cooling capacity USRT 800 900

kW 2813 3165

Heating capacity Mcal/h 2800 2800

kW 3256 3256

Chilled water


Flow rate /h 483.8 544.3

PD kPa 60 100

Connection A 250 250

PASS - Even Even

Cooling water

Temperature 32 / 37.3 32 / 37.9

Flow rate /h 800 820

PD kPa 130 182


PASS - Odd Odd

Hot water

Temperature 54.2 / 60 54.9 / 60

Flow rate /h 483.8 544.3

PD kPa 60 100


PASS - Even Even

Electric capacity 50Hz kVA 35.9 43.9

60Hz kVA 36.0 42.8

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 7.5+3.7 7.5+5.5

Ref. Pump kW 1.5 1.5

Burner fan kW 7.5 7.5

Gas consumption

(13A)

Cooling N /h 188.8 212.4

Heating N /h 291.2 291.2

Input supply

pressure mmAq 10,000


Dimensions

(inside)

Length(L) mm 6,400 7,250

Width(W) mm 3,350 3,350

Height(H) mm 3,480 3,480

Operating weight Ton 36.9 43.3

Rigging weight Ton 33.5 39.7

Insulating area Hot Surface 54 60

Cold Surface 25 28

Contained

water

Chilled water 1.03 1.11

Cooling water 2.62 2.85

Cooling tower type SCTM 1,200 1,400

Heating increase Large temperature differentials condition (15-7℃℃℃℃/32-37℃℃℃℃)

Model Item

SAB-DH

012GA 015GA 018GA 021GA 024GA 028GA 032GA


kW 422 527 633 738 844 985 1,125

Heating capacity Mcal/h 430 554 670 670 860 1,110 1,110

kW 500 644 779 779 1,000 1,291 1,291

Chilled water


Flow rate /h 45.4 56.7 68 79.4 90.7 105.8 121.0

PD kPa 58 74 98 67 72 74 79

Connection A 80 80 100 100 100 125 125


Cooling water


Flow rate /h 130 162 195 228 260 303 345

PD kPa 97 88 84 93 95 93 80

Connection A 125 125 150 150 150 200 200


Hot water

Temperature 50.5/60 50.2/60 50.2/60 51.6/60 50.5/60 49.5/60 50.8/60

Flow rate /h 45.4 56.7 68 79.4 90.7 105.8 121.0

PD kPa 58 74 98 67 72 74 79

Connection A 80 80 100 100 100 125 125



60Hz kVA 7.8 9.7 10.1 10.2 11.1 16.4 16.4

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 1.1+1.1 2.2+1.1 2.2+1.1 3.7 3.7 5.5 5.5

Ref. Pump kW 0.2 0.2 0.4 0.4 0.4 0.4 0.4

Burner fan kW 1.5 1.5 1.5 1.5 2.2 3.7 3.7

Gas consumption

(13A)

Cooling N /h 28.3 35.4 42.5 49.6 56.6 66.1 75.5

Heating N /h 44.7 57.6 69.7 69.7 89.4 115.4 115.4

Input supply



Dimensions

(inside)

Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950

Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988

Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248



Insulating area Hot Surface 13 14 15 16 18 20 20

Cold Surface 7 7 8 10 10 12 12

Contained

water

Chilled water 0.138 0.148 0.183 0.203 0.219 0.253 0.273

Cooling water 0.233 0.27 0.344 0.372 0.432 0.465 0.539


Heating increase Large temperature differentials condition (15(15(15(15----7777℃℃℃℃/32/32/32/32----37.337.337.337.3℃℃℃℃))))

Model

Item

SAB-DH

036GA 040GA 045GA 050GA 056GA 060GA 070GA


kW 1,266 1,407 1,582 1,758 1,969 2,110 2,461


kW 1,613 1,613 1,936 1,936 2,264 2,264 2,695

Chilled water


Flow rate /h 136.1 151.2 170.1 189.0 211.7 226.8 264.6

PD kPa 111 113 109 112 87 84 73

Connection A 125 125 150 150 150 150 150


Cooling water


Flow rate /h 360 400 450 500 560 600 700

PD kPa 89 92 94 101 161 162 157

Connection A 200 200 250 250 300 300 300


Hot water

Temperature 49.8/60 50.8/60 50.2/60 51.2/60 50.8/60 51.4/60 51.2/60

Flow rate /h 136.1 151.2 170.1 189.0 211.7 226.8 264.6

PD kPa 111 113 109 112 87 84 73

Connection A 125 125 150 150 150 150 150


Electric capacity 50Hz kVA 18.8 22.9 29.7 33.5

60Hz kVA 17.8 23.2 30.2 33.7

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 4.5+2.2 5.5+3.7 7.5+3.7

Ref. Pump kW 0.75 1.5 1.5


Gas consumption

(13A)

Cooling N /h 82.5 91.6 103.1 114.5 128.3 137.5 160.4

Heating N /h 144.2 144.2 173.2 173.2 202.5 202.5 241.1

Input supply



Dimensions

(inside)

Length(L) mm 5,150 5,150 5,920 6,100

Width(W) mm 2,440 2,480 2,550 3,350

Height(H) mm 2,650 2,940 3,040 3,480



Insulating area Hot Surface 33 33 37 37 44 44 47

Cold Surface 13 13 16 16 19 19 22

Contained

water

Chilled water 0.53 0.56 0.65 0.68 0.74 0.77 0.98

Cooling water 1.14 1.2 1.4 1.46 1.65 1.73 2.5

Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Heating increase standard condition is just raising the heating calorie. water is 780 kPa G(8 kg/ G). 10. Hot generator is changed for heating increase standard condition therefore 4. control range for Standard specification (Capacity, should check connection between the burner and the combustion system.



Heating increase Large temperature differentials condition (15-7℃℃℃℃/32-37.3℃℃℃℃)

Model Item

SAB-DH

080GA 090GA

Cooling capacity USRT 800 900

kW 2,813 3,165

Heating capacity Mcal/h 2,800 2,800

kW 3,256 3,256

Chilled water


Flow rate /h 302.4 340.2

PD kPa 80 133


PASS - Even Even

Cooling water

Temperature 32 / 37.3 32 / 37.9

Flow rate /h 800 820

PD kPa 130 182


PASS - Odd Odd

Hot water

Temperature 50.7 / 60 51.8 / 60

Flow rate /h 302.4 340.2

PD kPa 80 133


PASS - Even Even

Electric capacity 50Hz kVA 35.9 43.9

60Hz kVA 36.0 42.8

Electric motor

power

60Hz(50Hz)

Sol. Pump kW 7.5+3.7 7.5+5.5

Ref. Pump kW 1.5 1.5

Burner fan kW 7.5 7.5

Gas consumption

(13A)

Cooling N /h 188.8 212.4

Heating N /h 291.2 291.2

Input supply



Dimensions

(inside)

Length(L) mm 6,400 7,250

Width(W) mm 3,350 3,350

Height(H) mm 3,480 3,480

Operating weight Ton 36.9 43.3

Rigging weight Ton 33.5 39.7

Insulating area Hot Surface 54 60

Cold Surface 25 28

Contained

water

Chilled water 1.03 1.11

Cooling water 2.62 2.85

Cooling tower type SCTM 1,200 1,400

External dimensionsExternal dimensionsExternal dimensionsExternal dimensions

Please refer to the specifications in p.4-7 for actual dimensions values of each model.

Directions of outlet nozzle is on side B when the number of passes is odd number and on side A when it is even

number above drawings.

High efficiency EHigh efficiency EHigh efficiency EHigh efficiency E----series series series series

MODEL 012E1/

015E1 018E1

021E1/

024E1

028E1/

032E1

036E1/

040E1

045E1/

050E1

056E1/

063E1 070E1

L 3,353 3,408 3,791 4,591 5,034 5,807 6,807 7,807

W 1,955 1,955 1,955 1,955 2,068 2,131 2,391 2,464

H 2,419 2,419 2,419 2,419 3,102 3,102 3,222 3,260

HIghHIghHIghHIgh efficiency Gefficiency Gefficiency Gefficiency G----seriesseriesseriesseries

MODEL 012G1/

015G1 018G1

021G1/

024G1

028G1/

032G1

036G1/

040G1

045G1/

050G1

056G1/

063G1

070G1/

080G1

090G1/

100G1

L 3,350/3,590 3,790 4,150/4,410 4,950 5,150 5,150 5,920 6,100/6,400 7,250

W 1,925 1,925 1,925 1,988 2,440 2,480 2,550 3,350 3,350

H 2,170 2,170 2,170 2,248 2,650 2,940 3,040 3,480 3,480

Foundation & Maintenance space dimensionsFoundation & Maintenance space dimensionsFoundation & Maintenance space dimensionsFoundation & Maintenance space dimensions GGGG----SeriesSeriesSeriesSeries

High efficiency High efficiency High efficiency High efficiency GGGG----series series series series (A~K)(A~K)(A~K)(A~K)

Model A B C D E F G H I J K

012E1 740 1,410 506 640 410 590 406 540 2,065 2,456 306

015E1 740 1,410 506 640 410 590 406 540 2,065 2,456 306

018E1 740 1960 506 640 410 1,140 406 540 2,065 3,060 306

021E1 740 2,100 760 640 300 1,500 660 540 2,065 3,400 50

024E1 740 2,100 760 640 300 1,500 660 540 2,065 3,400 50

028E1 1,060 2,834 506 960 357 2,120 406 860 2,128 4,200 50

032E1 1,060 2,834 506 960 357 2,120 406 860 2,128 4,200 50

High efficiency High efficiency High efficiency High efficiency GGGG----series series series series (A(A(A(A’~F~F~F~F’ ))))

Model A’ B’ C’ D’ E’ F’

012E1 2,400 1,410 2,200 1,412 2,065 2,456

015E1 2,400 1,410 2,200 1,412 2,065 2,456

018E1 3,000 1,960 2,800 1,412 2,065 3,060

021E1 3,600 2,100 3,910 1,412 2,065 3,400

024E1 3,600 2,100 3,910 1,412 2,065 3,400

028E1 4,720 2,834 4,460 1,412 2,128 4,200

032E1 4,720 2,834 4,460 1,412 2,128 4,200

High efficiency EHigh efficiency EHigh efficiency EHigh efficiency E----series series series series (A~K)(A~K)(A~K)(A~K)

Model A B C D E F G I J K

036E1 650 3,750 570 922 2,478 170 2,431 2,231 4,790 4,990

040E1 650 3,750 570 922 2,478 170 2,431 2,231 4,790 4,990

045E1 650 4,570 570 922 2,470 1,170 2,695 2,495 5,790 5,990

050E1 650 4,570 570 922 2,470 1,170 2,695 2,495 5,790 5,990

056E1 650 5,870 570 1,677 2,653 1,540 2,768 2,568 7,090 7,290

063E1 650 5,870 570 1,677 2,653 1,540 2,768 2,568 7,090 7,290

070E1 650 6,570 570 1,677 2,953 1,940 2,768 2,568 7,790 7,990

High efficiency EHigh efficiency EHigh efficiency EHigh efficiency E----series series series series (A(A(A(A’~I~I~I~I’ ))))

Model A’ B’ C’ D’ E’ F’ G’ H’ I’

036E1 4,500 3,570 4,500 750 670 1,741 25 2,231 4,790

040E1 4,500 3,570 4,500 750 670 1,741 25 2,231 4,790

045E1 5,500 4,570 5,500 750 670 1,741 25 2,495 5,790

050E1 5,500 4,570 5,500 750 670 1,741 25 2,495 5,790

056E1 6,900 5,870 6,900 750 670 1,741 25 2,568 7,090

063E1 6,900 5,870 6,900 750 670 1,741 25 2,568 7,090

070E1 7,600 6,570 7,600 750 670 1,741 25 2,568 7,790

Distributed byDistributed byDistributed byDistributed by

CHP Solution Inc. located at 333 Sylvan Avenue Suite 211, Englewood Cliffs, NJ 07401 USACHP Solution Inc. located at 333 Sylvan Avenue Suite 211, Englewood Cliffs, NJ 07401 USACHP Solution Inc. located at 333 Sylvan Avenue Suite 211, Englewood Cliffs, NJ 07401 USACHP Solution Inc. located at 333 Sylvan Avenue Suite 211, Englewood Cliffs, NJ 07401 USA

Email ; Email ; Email ; Email ; [email protected]@[email protected]@centioncorp.com

Documents

DIRECT FIRED ABSORPTION CHILLER & HEATER - …lenergy.hu/dokuk/termekek/51/yiw9sd8v.pdf · Cooling capacity USRT 120 150 180 ... Cooling tower type SCTM 175 200 250 300 350 400 400