Diploma in Engineering - QUT · 2019. 1. 9. · Diploma in Engineering Year 2018 QUT code EN02 CRICOS 086329G Duration (full-time international) 1 year OP 14 Rank 68 International

Handbook

This information is correct as at 10/12/2018. For the most up-to-date course information, visit

https://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN02&courseID=32728. CRICOS No.00213J

Diploma in Engineering

Year 2018

QUT code EN02

CRICOS 086329G

Duration(full-timeinternational)

1 year

OP 14

Rank 68

International fee(indicative)

2018: $13,790 per studyperiod (48 credit points)based on four units

Total creditpoints

96

Credit pointsfull-time sem.

48

CourseCoordinator

Dr Annetta Spathis([email protected])

DisciplineCoordinator

International Subjectprerequisites

Maths B●

You must have achieved this study at alevel comparable to Australian Year 12 orin recognised post-secondary studies.

Minimum EnglishrequirementsStudents must meet the Englishproficiency requirements.

IELTS (International English LanguageTesting System)

Overall 5.5

Listening 5.0

Reading 5.0

Writing 5.0

Speaking 5.0

OverviewThe Diploma in Engineering, which hasintakes for international students inFebruary, June and October, is equivalentto the first year of the Bachelor ofEnginering. In this program, studentsstudy six first year faculty core units aswell as two units of Communication whichhave been designed to support their othercore units. Students who successfullycomplete these units earn full academiccredit for eight units towards their degree.Graduates articulate to the second year ofthe Bachelor of Engineering. Smalllectures and tutorials, additionalworkshops and the support of Languageand Welfare Advisers provide anexcellent learning environment.

Entry Requirements -AcademicSuccessful completion of senior highschool with the required grades. Studentscan find more detailed country specificentry requirements at the following website:http://www.qut.edu.au/international/applying

English LanguageRequirementsQueensland Senior English (LowAchievement) or IELTS 5.5 with no sub-score less than 5.0 or TOEFL iBT Overallscore of 69 (at least 18 in writing andreading and 17 or more in listening andspeaking) or TOEFL 525 (paper) orTOEFL 193 (CBT) or equivalent, orsuccessful completion of the EAP

program. (N.B. Students should alsocheck visa requirements).

ProgressionRequirements for progression to thesecond year of the QUT Bachelor ofEngineering program:

i) fulfil the Diploma course requirements,ii) achieve a minimum GPA of 4.0

Course CompletionStudents must obtain at least a grade of 4(Pass) or better in all units.

AbbreviationDipEng

Sample StructureCode Title

Semester 1

EGD113Energy inEngineeringSystems

EGD121EngineeringMechanics

EGD125IntroductoryEngineeringMathematics

QCD110AcademicCommunication 1

Semester 2

EGD120Foundations ofElectricalEngineering

EGD126EngineeringComputation

EGD270Civil EngineeringMaterials


SemestersSemster One●Semester Two●Semester Three●Please note: The units offeredunder the 3-Sem Diploma aresubject to availability

●

Code Title

Semster One

EGD113Energy inEngineeringSystems

EGD125IntroductoryEngineeringMathematics


https://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN02&courseID=32728

Diploma in Engineering



Semester Two

EGD120Foundations ofElectricalEngineering

EGD121EngineeringMechanics


Semester Three

EGD126EngineeringComputation

EGD270Civil EngineeringMaterials

Please note: The units offered under the3-Sem Diploma are subject to availability



Handbook


https://www.student.qut.edu.au/enrolment/courses/course?courseCode=IT10&courseID=32799. CRICOS No.00213J

Diploma in Information Technology

Year 2018

QUT code IT10

CRICOS 081616G

Duration(full-timeinternational)

1 year

OP 14

Rank 68


2018: $9,970 per studyperiod (48 credit points)based on four units

Total creditpoints

96


48

CourseCoordinator

Dr Annetta Spathis([email protected])




Overall 5.5

Listening 5.0

Reading 5.0

Writing 5.0

Speaking 5.0

QUT International CollegeInternational students may upgrade to theQUT Bachelor of Information Technologythrough QUT International College at ourKelvin Grove campus.

The University Diploma in InformationTechnology is equivalent to twosemesters of the Bachelor of InformationTechnology degree with a total of 96credit points (48 standard credit points fora full-time semester).

In the University Diploma program,students study six degree core units aswell as two English language units thathave been designed to support the othercore units.

Progression to the Bachelorof Information TechnologyStudents who successfully completethese eight units with a grade pointaverage of 4 (on a 7-point scale) andobtain a grade of at least 4 inProfessional Communication 2 are giventwo semesters full-time advancedstanding towards their degree and areguaranteed a place in the Bachelor ofInformation Technology.

Students who complete the UniversityDiploma in Information Technology arealso eligible for 96 credit points towardsthe Bachelor of Corporate SystemsManagement and Bachelor of Games andInteractive Entertainment.


Semester One

ITD101 Impact of IT

ITD104 Building IT Systems

ITD122ModellingInformationSystems

QCD110 Academic

Communication 1

Semester Two

ITD102ComputerTechnologyFundamentals

ITD103 Designing for IT

ITD121ProgrammingPrinciples


SemestersSemester One●Semester Two●Semester Three●Please note: The units offered aresubject to availability

●

Code Title

Semester One

ITD101 Impact of IT

ITD104 Building IT Systems


Semester Two

ITD102ComputerTechnologyFundamentals

ITD121ProgrammingPrinciples


Semester Three

ITD103 Designing for IT

ITD122ModellingInformationSystems

Please note: The units offered aresubject to availability


https://www.student.qut.edu.au/enrolment/courses/course?courseCode=IT10&courseID=32799. CRICOS No.00213J

https://www.student.qut.edu.au/enrolment/courses/course?courseCode=IT10&courseID=32799

Handbook



Bachelor of Engineering (Honours)

Year 2018

QUT code EN01

CRICOS 084921G

Duration(full-time)

4 years

OP 10

Rank 78

OP Guarantee Yes

Campus Gardens Point

Domestic fee(indicative)

2018: CSP $9,400 peryear full-time (96 creditpoints)


2018: $35,000 per yearfull-time (96 credit points)

Total creditpoints

384


48

Start months July, February

Int. Start Months July, February

Deferment You can defer your offerand postpone the start ofyour course for one year.

CourseCoordinator

SEF Enquiries - email:[email protected];ph: +61 7 3138 8822

Domestic AssumedknowledgeBefore you start this course we assumeyou have sound knowledge in theseareas

English●Maths B●

We assume that you have knowledgeequivalent to four semesters at highschool level (Years 11 and 12) with soundachievement (4, SA). Recommendedstudy: Chemistry, Maths C and Physics.


Maths B●

You must have achieved this study at alevel comparable to Australian Year 12 orin recognised post-secondary studies.Recommended study: Chemistry, MathsC and Physics.



Overall 6.5

Listening 6.0

Reading 6.0

Writing 6.0

Speaking 6.0

Professional RecognitionFull professional accreditation fromEngineers Australia has been given for allprimary majors in this course.

Complementary StudiesYou have the opportunity to undertake asecond major or two minors. A secondmajor is a set of eight units (96 creditpoints) in the same discipline. A minor isa set of four units (48 credit points) in thesame discipline. You will select yourprimary major, second major and/orminors after the completion of your firstyear.

Special CourseRequirementsA candidate for the degree of Bachelor ofEngineering (Honours) must obtain atleast 60 days of industrialexperience/practice in an engineeringenvironment as approved by the coursecoordinator.

International Student EntryInternational students must maintain anenrolment program that will allow them tocomplete their course within the specifiedtimeframe of their eCoE (electronicConfirmation of Enrolment).

Course DesignYour QUT Bachelor of Engineering(Honours) degree consists of 384 creditpoints (32 units) arranged as follows:

(a) First Year: Four (4) core units 48cp +two (2) Discipline Foundation units 24cp +two (2) option units 24cp (96 credit points)

(b) Major: One (1) block of eight (8) majorunits 96cp plus eight (8) Honours levelunits 96cp (192 credit points)

Honours units to consist of:• Research methods 12cp• Project 24cp• 5 x Advanced major units 60cp

Available Majors are:

• Civil• Computer and Software Systems• Electrical• Electrical and Aerospace• Mechatronics• Mechanical• Medical, or• Process

(c) Complementary Studies: 1 x SecondMajor (8 unit set) or 2 x Minor (4 unit seteach)from the options specified for yourchosen major. (96 credit points)

Pathways to Further StudyThe (EN01) Bachelor of Engineering(Honours) is located at Level 8 of theAustralian Qualifications Framework(AQF). Graduates may be eligible fordiscipline relevant Masters and/orDoctoral level programs.


Year 1 - Semester 1

EGB100EngineeringSustainability andProfessional Practice

EGB111Foundation ofEngineering Design

EGB113Energy in EngineeringSystems

MZB125IntroductoryEngineeringMathematics


Bachelor of Engineering (Honours)



OR

MXB161ComputationalExplorations

Year 1 - Semester 2

MZB126EngineeringComputation

Plus 36cp from ONE of the EngineeringFoundation Strands

If you're intended to select MedicalEngineering Major, please refer your firstyear study plan at Medical major 1stYear - July Entry

Code Title

Year 1 - Semester 2


OR



PVB101Physics of the VeryLarge

PVB101 is the substitute unit of EGB113in semester 2

Plus select 12cp (1 unit) from ONE ofthe Engineering Foundation Strands

Year 2 - Semester 1



Plus select 24cp (2 units) from ONE ofthe Engineering Foundation Strands



https://www.student.qut.edu.au/studying/courses/course?courseCode=EN01&courseID=30288&structureID=78516#structure-tabhttps://www.student.qut.edu.au/studying/courses/course?courseCode=EN01&courseID=30288&structureID=78516#structure-tab

Handbook



Bachelor of Engineering (Honours) (Civil)

Year 2018

QUT code EN01

CRICOS 084921G

Duration(full-time)

4 years

OP 10

Rank 78

OP Guarantee Yes






Total creditpoints

384


48




CourseCoordinator



Dr Brian Lee





Maths B●




Overall 6.5

Listening 6.0

Reading 6.0

Writing 6.0

Speaking 6.0

Professional RecognitionFull professional accreditation fromEngineers Australia has been given forthis course.

Complementary StudiesYou will have the opportunity toundertaken either a 2nd major or twominors.

Special CourseRequirementsA candidate for the degree of Bachelor ofEngineering (Honours)(Civil) must obtainat least 60 days of industrialexperience/practice in an engineeringenvironment as approved by the coursecoordinator.

International Student EntryInternational students must maintain anenrolment program that will allow them tocomplete their course within the specified

timeframe of their eCoE (electronicConfirmation of Enrolment).

Domestic Course structureTo graduate with a Bachelor ofEngineering (Honours), students arerequired to complete 384 credit points ofcourse units, as outlined below:

First year (96 credit points): fourcore units 48cp + one Maths optionunit 12cp + foundation strandoptions 36cp (include two disciplinefoundation units 24cp + one optionunit 12cp)

●

Major(192 credit points): one (1)block of eight (8) major units 96cpplus eight (8) honours-level units96cp

●

Complementary studies(96 creditpoints): one x second major or two xminor .

●

Honours units to consist of:Research methods 12cp●Project 24cp●5 x advanced major units 60cp.●

International CoursestructureTo graduate with a Bachelor ofEngineering (Honours), students arerequired to complete 384 credit points ofcourse units, as outlined below:


●

Major(192 credit points): one (1)block of eight (8) major units 96cpplus eight (8) honours-level units96cp

●

Complementary studies(96 creditpoints): one x second major or two xminor .

●



Year 1 - Semester 1




MZB125IntroductoryEngineering





Mathematics

OR


Year 1 - Semester 2



SemestersYear 2, Semester 1●Year 2, Semester 2●Year 3, Semester 1●Year 3, Semester 2●Year 4, Semester 1●Year 4, Semester 2●

Code Title

Year 2, Semester 1

EGB270Civil EngineeringMaterials

EGB272Traffic and TransportEngineering

EGB275 Structural Mechanics

EGB371EngineeringHydraulics

Year 2, Semester 2

EGB273Principles ofConstruction

EGB373GeotechnicalEngineering

EGB376 Steel Design

EGH471Advanced WaterEngineering

Year 3, Semester 1

EGB375Design of ConcreteStructures

EGH473AdvancedGeotechnicalEngineering

2nd Major/Minor unit


Year 3, Semester 2

EGH404Research inEngineering Practice

EGH472Advanced Highwayand PavementEngineering

EGH475Advanced ConcreteStructures


Year 4, Semester 1

EGH400-1 Research Project 1




Year 4, Semester 2


EGH479Advances in CivilEngineering Practice




Code Title

Year 2, Semester 2

EGB273Principles ofConstruction

EGB275 Structural Mechanics

EGB373GeotechnicalEngineering


Year 3, Semester 1

EGB272Traffic and TransportEngineering

EGB270Civil EngineeringMaterials

EGB371EngineeringHydraulics


Year 3, Semester 2

EGB376 Steel Design

EGH471Advanced WaterEngineering

EGH472Advanced Highwayand PavementEngineering


Year 4, Semester 1

EGB375Design of ConcreteStructures


EGH473AdvancedGeotechnicalEngineering


Year 4, Semester 2

EGH475Advanced ConcreteStructures

EGH479Advances in CivilEngineering Practice



Year 5, Semester 1





The following Second Majors are highlyrecommended for students undertakingthe Civil Major:

Construction Engineering SecondMajor (EN01SMJ-CONSTRU)

●

Environmental Engineering SecondMajor (EN01SMJ-ENVIRNL)

●

Structural Engineering SecondMajor (EN01SMJ-STRUENG)

●

Transport Engineering SecondMajor (EN01SMJ-TRANSEN)

●

NOTE:

Code Title

These Second Majors are listed first,with other available Second Majorslisted below these.

Study Area DescriptionFor more details and description on thisminor please refer to the EN01Complementary Studies at the Faculty’sStudent Zone under "Your Course" page.

This minor offers a lot of flexibility.Depending on your area of interest youcan choose units focusing on statisticalscience (suggested pathway: MXB101,MXB107, MXB202, MXB242),mathematical and statistical modelling(suggested pathway: MXB101, MXB105,MXB221, MXB241), appliedmathematics (suggested pathway:MXB105, MXB106, MXB202, MXB221),simulation (suggested pathway:MXB101, MXB106, MXB232, MXB261),computation and modelling (suggestedpathway: MXB103, MXB105, MXB221,MXB261).

In this listUnit List●SUGGESTED PATHWAYS●Statistical Science●Mathematical and StatisticalModelling

●

Applied Mathematics●Simulation Science●Computation, modelling andsimulation

●

Unit List

Code Title

Select 2 units (24 credit points) from UnitOption List 1:

MXB101Probability andStochastic Modelling1

MXB103IntroductoryComputationalMathematics

MXB105 Calculus of One and

https://www.student.qut.edu.au/about/faculties-institutes-and-divisions/faculties/science-and-engineering/managing-your-course/planning-you-course/your-engineering-honours-degree/your-en01-complementary-studies




Two Variables

MXB106Linear Algebra andDifferential Equations

MXB107Introduction toStatistical Modelling


MXB202 Advanced Calculus

MXB221Ordinary DifferentialEquations

MXB232Introduction toOperations Research


MXB242Regression andDesign

MXB261Modelling andSimulation Science

SUGGESTED PATHWAYS

Code Title

Statistical Science

Code Title





Mathematical and Statistical Modelling

Code Title


MXB105Calculus of One andTwo Variables



Applied Mathematics

Code Title





Simulation Science

Code Title

MXB101 Probability and

Stochastic Modelling1




Computation, modelling and simulation

Code Title







Handbook



Bachelor of Engineering (Honours) (Computer and Software Systems)

Year 2018

QUT code EN01

CRICOS 084921G

Duration(full-time)

4 years

OP 10

Rank 78

OP Guarantee Yes






Total creditpoints

384


48




CourseCoordinator



Dr Wayne Kelly

[email protected]





Maths B●




Overall 6.5

Listening 6.0

Reading 6.0

Writing 6.0

Speaking 6.0



Special CourseRequirementsA candidate for the degree of Bachelor ofEngineering (Honours)(Computer andSoftware Systems) must obtain at least60 days of industrial experience/practicein an engineering environment asapproved by the course coordinator.





●

Major: one (1) block of eight (8)major units 96cp plus eight (8)honours-level units 96cp (192 creditpoints)

●

Complementary studies: one xsecond major or two x minor (96credit points).

●




●

Major: One (1) block of eight (8)major units 96cp plus eight (8)Honours level units 96cp (192 creditpoints)

●

Complementary Studies: 1 x 2ndmajor or 2 x minor (96 credit points)

●

Honours units to consist of:Research methods 12cp●Project 24cp●5 x Advanced major units 60cp●


Year 1 - Semester 1









OR


Year 1 - Semester 2



Please note -

This is an example study plan forstudents on a relatively standardprogression, however, depending onwhich units and second majors/minorsyou choose, you may need to deviatefrom that plan. Please contact yourSubject Area Coordinator Dr WayneKelly, Email: [email protected] if youwish to discuss your study plan options.


Code Title

Year 2, Semester 1

EGB240 Electronic Design

CAB201ProgrammingPrinciples



Year 2, Semester 2

CAB202Microprocessorsand Digital Systems

EGB242 Signal Analysis



Year 3, Semester 1

Intermediate Software Unit Option




Year 3, Semester 2

CAB403SystemsProgramming

Intermediate Electrical Unit Option

Intermediate Electrical or Software UnitOption

EGH404Research inEngineeringPractice

Year 4, Semester 1

Advanced Electrical Unit Option


EGH456 Embedded Systems


Year 4, Semester 2


EGH455Advanced SystemsDesign

Advanced Electrical or Software UnitOption

Advanced Software Unit Option

If you intend to select theCivil Engineering Major, please refer yourfirst year study plan at Civil major 1stYear - July Entry.

OR

If you intend to select the MedicalEngineering Major, please refer your firstyear study plan at Medical major 1stYear - July Entry.

Code Title

Year 1 - Semester 2


OR




OR


EGB123Civil EngineeringSystems

OR

Foundation Unit Option

Year 2 - Semester 1



EGB121 Engineering Mechanics

EGB120Foundations ofElectrical Engineering

OR


Please note -

This is an example study plan forstudents on a relatively standardprogression, however, depending onwhich units and second majors/minorsyou choose, you may need to deviatefrom that plan. Please contact your

Subject Area Coordinator Dr WayneKelly, Email: [email protected] if youwish to discuss your study plan options.


Code Title

Year 2, Semester 2

CAB201ProgrammingPrinciples




Year 3, Semester 1





Year 3, Semester 2

CAB403SystemsProgramming




Year 4, Semester 1


EGH456 Embedded Systems


Advanced Software Unit Option

Year 4, Semester 2


EGH455Advanced SystemsDesign



Year 5, Semester 1






This minor offers a lot of flexibility.Depending on your area of interest youcan choose units focusing on statistical

mailto:[email protected]://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tabmailto:[email protected]://www.student.qut.edu.au/about/faculties-institutes-and-divisions/faculties/science-and-engineering/managing-your-course/planning-you-course/your-engineering-honours-degree/your-en01-complementary-studies




science (suggested pathway: MXB101,MXB107, MXB202, MXB242),mathematical and statistical modelling(suggested pathway: MXB101, MXB105,MXB221, MXB241), appliedmathematics (suggested pathway:MXB105, MXB106, MXB202, MXB221),simulation (suggested pathway:MXB101, MXB106, MXB232, MXB261),computation and modelling (suggestedpathway: MXB103, MXB105, MXB221,MXB261).


●


●

Unit List

Code Title














SUGGESTED PATHWAYS

Code Title

Statistical Science

Code Title






Code Title





Applied Mathematics

Code Title





Simulation Science

Code Title






Code Title







Handbook



Bachelor of Engineering (Honours) (Electrical and Aerospace)

Year 2018

QUT code EN01

CRICOS 084921G

Duration(full-time)

4 years

OP 10

Rank 78

OP Guarantee Yes






Total creditpoints

384


48




CourseCoordinator



Dr Aaron Mcfadyen





Maths B●




Overall 6.5

Listening 6.0

Reading 6.0

Writing 6.0

Speaking 6.0



Special CourseRequirementsA candidate for the degree of Bachelor ofEngineering (Honours)(Electrical andAerospace) must obtain at least 60 daysof industrial experience/practice in anengineering environment as approved bythe course coordinator.





●


●


●




●


●


●



Year 1 - Semester 1









OR


Year 1 - Semester 2




Code Title

Year 2, Semester 1


CAB202Microprocessors andDigital Systems


EGB243Aircraft Systems andFlight

Year 2, Semester 2

EGB345Control and DynamicSystems

EGB346Unmanned AircraftSystems

Intermediate Electrical & Aerospace UnitOption


Year 3, Semester 1

EGB349Systems Engineeringand Design Project

Advanced Electrical & Aerospace UnitOption



Year 3, Semester 2

EGH445 Modern Control

EGH450AdvancedUnmanned AircraftSystems



Year 4, Semester 1


EGH446AutonomousSystems



Year 4, Semester 2






OR


Code Title

Year 1 - Semester 2


OR




OR



OR


Year 2 - Semester 1





OR



Code Title

Year 2, Semester 2





Year 3, Semester 1


EGB243Aircraft Systems andFlight



Year 3, Semester 2


EGB346Unmanned AircraftSystems

Intermediate Electrical & Aerospace UnitOption


Year 4, Semester 1

EGB349Systems Engineeringand Design Project




Year 4, Semester 2



EGH450AdvancedUnmanned AircraftSystems


Year 5, Semester 1







https://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tabhttps://www.student.qut.edu.au/about/faculties-institutes-and-divisions/faculties/science-and-engineering/managing-your-course/planning-you-course/your-engineering-honours-degree/your-en01-complementary-studies





●


●

Unit List

Code Title














SUGGESTED PATHWAYS

Code Title

Statistical Science

Code Title






Code Title





Applied Mathematics

Code Title





Simulation Science

Code Title






Code Title







Handbook



Bachelor of Engineering (Honours) (Electrical)

Year 2018

QUT code EN01

CRICOS 084921G

Duration(full-time)

4 years

OP 10

Rank 78

OP Guarantee Yes






Total creditpoints

384


48




CourseCoordinator



Dr Jacob Coetzee3138 [email protected]





Maths B●




Overall 6.5

Listening 6.0

Reading 6.0

Writing 6.0

Speaking 6.0



Special CourseRequirementsA candidate for the degree of Bachelor ofEngineering (Honours)(Electrical) mustobtain at least 60 days of industrialexperience/practice in an engineeringenvironment as approved by the coursecoordinator.





●


●


●




●


●


●



Year 1 - Semester 1









OR


Year 1 - Semester 2



SemestersYear 2, Semester 1●Year 2, Semester 2●Year 3, Semester 1●Year 3, Semester 2●Year 4, Semester 1●Year 4, Semester 2●Intermediate Electrical Unit OptionsList

●

Advanced Electrical Unit OptionsList

●

Code Title

Year 2, Semester 1

EGB241Electromagnetics andMachines




Year 2, Semester 2

Intermediate Electrical Option Unit[1]



2nd Major/Minor unit[1]

Year 3, Semester 1

EGB340 Design and Practice

Advanced Electrical Option Unit[1]

Advanced Electrical Option Unit [2]or2nd Major/Minor unit[2]


Year 3, Semester 2



2nd Major/Minor unit[2] or AdvancedElectrical Option Unit [2]


Year 4, Semester 1





Year 4, Semester 2





Intermediate Electrical Unit Options List

EGB341Energy Supply andDelivery

EGB342Telecommunicationsand SignalProcessing


EGB348 Electronics

Advanced Electrical Unit Options List

EGH441Power SystemModelling

EGH442RF Techniques andApplications

EGH443AdvancedTelecommunications

EGH444Digital Signals andImage Processing


EGH446 Autonomous Systems

EGH448 Power Electronics

EGH449 Advanced Electronics

The following unit options have beendiscontinued, but will still count towardsthis minor:

EGH440 Power Systems Analysis (disc31/12/2018)


OR


Code Title

Year 1 - Semester 2


OR




OR



OR


Year 2 - Semester 1





OR


Please refer to the Engineering HonoursMajors page under "Your Course" at theFaculty's Student Zone for more details,including a course diagram, onthe Electrical engineering major.

SemestersYear 2, Semester 2●Year 3, Semester 1●Year 3, Semester 2●Year 4, Semester 1●Year 4, Semester 2●Year 5, Semester 1●Intermediate Electrical Unit OptionsList

●

Advanced Electrical Unit OptionsList

●

Code Title

Year 2, Semester 2



2nd Major/Minor Unit[1]


Year 3, Semester 1


EGB241Electromagnetics andMachines



Year 3, Semester 2





Year 4, Semester 1

EGB340 Design and Practice




Year 4, Semester 2


Advanced Electrical Option Unit[5] or2nd Major/Minor unit[6]


https://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tabhttps://www.student.qut.edu.au/about/faculties-institutes-and-divisions/faculties/science-and-engineering/planning-you-course/your-engineering-honours-degree/your-engineering-honours-majorshttps://www.student.qut.edu.au/about/faculties-institutes-and-divisions/faculties/science-and-engineering/planning-you-course/your-engineering-honours-degree/your-engineering-honours-majors#h2-1





Year 5, Semester 1


Advanced Electrical Option Unit [5]or2nd Major/Minor unit[6]



Intermediate Electrical Unit Options List

EGB341Energy Supply andDelivery

EGB342Telecommunicationsand SignalProcessing


EGB348 Electronics

Advanced Electrical Unit Options List

EGH441Power SystemModelling

EGH442RF Techniques andApplications

EGH443AdvancedTelecommunications

EGH444Digital Signals andImage Processing


EGH446 Autonomous Systems

EGH448 Power Electronics

EGH449 Advanced Electronics

The following unit options have beendiscontinued, but will still count towardsthis minor:

EGH440 Power Systems Analysis (disc31/12/2018)



In this listUnit List●SUGGESTED PATHWAYS●Statistical Science●Mathematical and Statistical●

ModellingApplied Mathematics●Simulation Science●Computation, modelling andsimulation

●

Unit List

Code Title














SUGGESTED PATHWAYS

Code Title

Statistical Science

Code Title






Code Title






Applied Mathematics

Code Title





Simulation Science

Code Title






Code Title








Handbook



Bachelor of Engineering (Honours) (Mechanical)

Year 2018

QUT code EN01

CRICOS 084921G

Duration(full-time)

4 years

OP 10

Rank 78

OP Guarantee Yes






Total creditpoints

384


48




CourseCoordinator



Professor Ted Steinberg





Maths B●




Overall 6.5

Listening 6.0

Reading 6.0

Writing 6.0

Speaking 6.0



Special CourseRequirementscandidate for the degree of Bachelor ofEngineering (Honours)(Mechanical) mustobtain at least 60 days of industrialexperience/practice in an engineeringenvironment as approved by the coursecoordinator.





●


●


●




●


●


●



Year 1 - Semester 1









OR


Year 1 - Semester 2




Code Title

Year 2, Semester 1

EGB210Fundamentals ofMechanical Design

EGB211 Dynamics

EGB214Materials andManufacturing

EGB323 Fluid Mechanics

Year 2, Semester 2

EGB314Strength ofMaterials

EGB322 Thermodynamics

2nd Major/Minor unit option


Year 3, Semester 1

EGB316Design of MachineElements

EGB321Dynamics ofMachines

EGH414 Stress Analysis


Year 3, Semester 2


EGH422AdvancedThermodynamics

EGH423 Fluids Dynamics


Year 4, Semester 1


EGH421Vibration andControl



Year 4, Semester 2


EGH420MechanicalSystems Design




OR


Code Title

Year 1 - Semester 2


OR




OR



OR


Year 2 - Semester 1





OR



Code Title

Year 2, Semester 2

EGB211 Dynamics




Year 3, Semester 1





Year 3, Semester 2





Year 4, Semester 1





Year 4, Semester 2





Year 5, Semester 1






Code Title

Year 2, Semester 2

EGB211 Dynamics




Year 3, Semester 1





Year 3, Semester 2



https://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tab






Year 4, Semester 1





Year 4, Semester 2





Year 5, Semester 1








●


●

Unit List

Code Title


MXB101Probability andStochastic Modelling

1












SUGGESTED PATHWAYS

Code Title

Statistical Science

Code Title






Code Title





Applied Mathematics

Code Title




MXB221 Ordinary Differential

Equations

Simulation Science

Code Title






Code Title








Handbook



Bachelor of Engineering (Honours) (Mechatronics)

Year 2018

QUT code EN01

CRICOS 084921G

Duration(full-time)

4 years

OP 10

Rank 78

OP Guarantee Yes






Total creditpoints

384


48




CourseCoordinator



Associate ProfessorJason Ford





Maths B●




Overall 6.5

Listening 6.0

Reading 6.0

Writing 6.0

Speaking 6.0



Special CourseRequirementsA candidate for the degree of Bachelor ofEngineering (Honours)(Mechatronics)must obtain at least 60 days of industrialexperience/practice in an engineeringenvironment as approved by the coursecoordinator.

International Strudent EntryInternational students must maintain anenrolment program that will allow them tocomplete their course within the specified




●


●


●




●


●


●



Year 1 - Semester 1









OR


Year 1 - Semester 2



Please note that thehighlighted units must be enrolled inthe year and semester specified

The highlighted units are EGB242,CAB202, EGB345, EGH446, SEB400,EGH400-1 and EGH400-2


Code Title

Year 2, Semester 1



EGB220MechatronicsDesign 1


EGB211 Dynamics

2nd Major/Minor Unit

Year 2, Semester 2

EGB345Control andDynamic Systems



EGB211 Dynamics



2nd major/Minor unit

Year 3, Semester 1





OR

EGH419MechatronicsDesign 3

2nd major/Minor unit



Year 3, Semester 2




Intermediate/ Advanced Electrical UnitOption


EGH413AdvancedDynamics


Year 4, Semester 1







Year 4, Semester 2






Advanced Electrical Unit Options



OR


Code Title

Year 1 - Semester 2


OR




OR

PVB101 Physics of the Very

Large


OR


Year 2 - Semester 1





OR


This is an example study plan forstudents on a relatively standardprogression, however, depending onwhich units and second majors/minorsyou choose, you may need to deviatefrom that plan. Please [email protected] if you wish todiscuss your study plan options.


Code Title

Year 2, Semester 2


EGB211 Dynamics



Year 3, Semester 1





Year 3, Semester 2


EGB345Control andDynamic Systems

Select one of:


Intermediate Electrical Option Unit

Select one of:



https://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32721&structureID=91636#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tabhttps://www.student.qut.edu.au/enrolment/courses/course?courseCode=EN01&courseID=32723#structure-tabmailto:[email protected]




Year 4, Semester 1





Year 4, Semester 2




Select one of:


Intermediate Electrical Option Unit


Year 5, Semester 1


Advanced Electrical Option Unit






●


●

Unit List

Code Title















SUGGESTED PATHWAYS

Code Title

Statistical Science

Code Title






Code Title





Applied Mathematics

Code Title





Simulation Science

Code Title






Code Title








Handbook



Bachelor of Engineering (Honours) (Medical)

Year 2018

QUT code EN01

CRICOS 084921G

Duration(full-time)

4 years

OP 10

Rank 78

OP Guarantee Yes






Total creditpoints

384


48




CourseCoordinator



Dr Devakar Epari

[email protected]





Maths B●

You must have achieved this study at alevel comparable to Australian Year 12 orin recognised post-second

Documents

Diploma in Engineering - QUT · 2019. 1. 9. · Diploma in Engineering Year 2018 QUT code EN02 CRICOS 086329G Duration (full-time international) 1 year OP 14 Rank 68 International